Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
OVERVIEWSYNC 2111 is a compact and rugged remote terminal unit (RTU) used for applications that control and monitor the distribution grid, including distribution feeders, auto reclosers, sectionalizers, disconnection switches, ring main units, capacitor banks and distributed energy resources. Support for IEC 61850/DNP3.0/IEC104 communication and IEC 61131. Programming standards makes the RTU smart-grid-ready with multiple communication interfaces including options for integrated cellular modems. Built in Web HMI makes it possible to remotely monitor and control distribution grid operations.
FEATURESGeneral• Enabled with smart grid protocols IEC 60870-101/104, DNP3.0,
Modbus, DLMS and IEC 61850• Logic programing engine based on IEC61131-3• Remote Device Management from Kalki.io • APIs for custom protocol and applications development #• Automatic startup with restart notification following power
restoration• Time synchronization using NTP/SNTP/NMEA/IEEE1588/IEC
60870/DNP3.0• Remote configuration and software update over air• Local/remote switch for safer maintenance and operations• Multi master communication capability• Transparent/tunneling support for remote device configuration• Built in Web HMI for monitoring and control• Event & Alarm Storage• Event notification over SMS for operator assistance• SNMP Agent/ Manager for NMS Integration • Internal and external pluggable cellular modem options
(GPRS/3G), designed for (4G)• External radio/ PSTN modem can be integrated
Hardwired I/O• 4 Card or 7 Card support per rack • 16 digital input for status indication• 16 digital output for remote commands• 8 unipolar analog input • 8 bipolar analog input • 4 Channel RTD input • Auto Calibration and Manual calibration support• LED indications for digital inputs and outputs• Optical isolation for digital inputs and outputs• I/O operation counter storage for asset maintenance
Security• IEC 62351-3 transport layer security• IEC 62351-5/DNP3 secure authentication
• SSL based VPN with AES, DES or 3DES encryption over WAN/LAN
• NERC-CIP compliant security standards*
APPLICATIONS• Distributed automation
– RMU automation – Sectionalizer automation – Auto-reclosure monitoring
• Asset monitoring – Power transformer – Distributed generation
MODELS• SYNC 2111-M2: RTU with 4 I/O cards• SYNC 2111-M3: RTU with 7 I/O cards
RELATED PRODUCTS• SYNC 4000: Control Center M2M Gateway• Kalki.io - Energy IoT Platform
[email protected] | www.kalkitech.com © 2018 Kalkitech
v
SYNC 2100 SeriesRemote Terminal Units
Capacitor Banks
Distribution Network
DT Monitoring Equipment
Ring Main UnitsSectionalizers
Control Room
GPRS/CDMA Network
Router
SYNC 3000
SCADA / HMI
Public Network Provided by ISP
FEEDER RTU SPECIFICATIONSGeneral SYNC2111-M2 SYNC2111-M3
Management
EasyConnect configuration utility/web HMI/SNMP and SSH interface over secure networkFOTA support over GPRS/EDGE/CDMA/EVDO/UMTS/HSPABuilt in Web HMI for monitoring and controlDirect over debug port or console port
System Protocols TCP/IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP, ICMP, DHCP, BOOTP, Telnet, DNS, ARP, PPPoE, DDNSApplication Protocols IEC 60870-5-101/104, DNP3 serial/TCP, Modbus RTU/TCP, DLMS, IEC 61850 and many more.Additional Protocols Refer to full list of protocols at https://www.kalkitech.com/knowledge-center/protocols/LED Indications LAN ready, data transfer, serial port RX/TX, status, power, IO card status
SecurityNERC-CIP compliant (Refer NERC-CIP compliance document for details), SSHv2 SSL based VPN tunnel using Blowfish/AES/3DESIEC62351-3, -5
Logic Programming Basic logic engine with AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data delay operations and advanced logic based on IEC61131-3
Serial
Ports1 DB9 RS232 (not available when internal modem is used)1 DB9 RS232/4852 Terminal block RS485
Data Rate 110bps to 115.2kbpsEthernetPorts 1 RJ45Physical Layer 10/100 Base-T auto sensingIsolation 1500VAC min as per IEEE802.3/ANSI X3.263I/O InterfacesNumber of Slots 4 I/O card slots 7 I/O card slots
I/O Card options
Order Code: SYNC2111-16DI-A 16 Channel per IO card (24VDC)
Order Code: SYNC2111-16DO-A 16 Channel per IO card (500mA@24VDC)
Order Code: SYNC2111-8AI-A 8 Channel per IO card (0-10VDC, 0-5VDC,4-20mA, 0-20mA)
Order Code: SYNC2111-8AI-B
8 Channel per IO card (0-5mA, 0-1mA, 0-10mA, 0-20mA, 4-20mA, 0-1V, 0-2.50V, 0-5V, 1-5V, 0-10V, ± 1mA, ± 10mA, ± 20mA, ± 5V, ± 2.5V, 2/3/4 wire RTD)
Digital Input and Output Isolation 3kV optical
Digital Input Channel Configuration Single or Double indication, Debounce period (8 - 5000ms), Chatter suppression, Inversion, Intermediate suppression, Counter
Digital Output Channel Configuration Single or Double Command, SBO, Command mode (pulse/latch), Feedback point, CounterPower Requirements
Power SupplyOrder Code: PS-DC 19-58 VDC
Order Code: PS-ACDC 85-264 VAC 50-60Hz100-370 VDC
Consumption Details
Communication Card 5 WattInternal Modem 8 Watt peak16 DI Type A Card 1 Watt16 DO Type A Card 1 Watt8 AI Type A Card 1 Watt8 AI Type B Card 1 Watt
Plug-in ModemInternal 3G Modem (GPRS/EDGE/CDMA/EVDO available on request)External Radio modem, PSTN modem (external not part of RTU)PhysicalDimensions (H x W x D approx) 133mm x 270mm x 184mm 133mm x 482 mm x 184mmMounting WallWeight (approx) 1600 grams 1900 gramsEnvironmentalOperating Temperature -10ºC to 70ºC (14ºF to 158ºF)Storage Temperature -20ºC to 80ºC (-4ºF to 176ºF)Relative Humidity 5% - 95% RH non condensing
# On request* Refer to document for compliance details
Document: SYNC 2100 SeriesVersion: 5.07.102018
Corporate Headquarters: Bangalore, IndiaU.S. Headquarters: Campbell, CaliforniaSales Office: United Arab Emirates
© 2018 Kalkitech