Upload
vasilije-cetkovic
View
170
Download
0
Embed Size (px)
Citation preview
Technical data sheet
SwiSS-‐9 GmbH -‐ EMPA spin-‐off company Aarbergstrasse 5, CH-‐2560, Nidau, CH http://www.swiss-‐9.com info@swiss-‐9.com
Last update of data sheet March 2015
SwiSS-‐9® is a transparent, Teflon-‐like and easy-‐to-‐clean coating
PRODUCT DESCRIPTION SwiSS-‐9® surface treatment is a two component liquid solution that once deposited atop suitable surfaces produces a protective and particles and liquids repelling coating. Swiss-‐9® bonds chemically with:
• Glass • Ceramic • Metal
• Stone • Wood • Textile
or any other oxide rich surface and creates a durable ultrathin layer. The technology is based on silane chemistry and was researched and developed by scientists Dr. E. Balic and Dr. R. Ghisleni while at Advanced Materials Processing Laboratory, EMPA-‐Thun. It is proudly manufactured by SwiSS-‐9, GmbH in Nidau, Switzerland, an “EMPA Spin-‐off company.”
PROPERTIES OF THE COATED SURFACE • Water and oil repellent Hydrophobicity (glass): Static Contact Angle 101˚ Tilt Angle 17˚ • Anti-‐microbial • Anti-‐reflective • Anti-‐fingerprint • Anti-‐icing • Anti-‐fog • Anti-‐graffiti
• Particles (dirt, sand, mineral deposits, vehicular emissions etc.) repellent
SwiSS-‐9® decreases lime deposition more than competition does! SwiSS-‐9® decreases sand deposits nearly 3X compared to uncoated glass! SwiSS-‐9® film also increases the amount of transmitted light/solar energy through a typical glass substrate by 2-‐3%
Water drop atop SwiSS-‐9 coated glass
Temperature resistance
UV resistance
Mechanical resistance
Wear resistance (no degradation observed)
Chemical resistance (SwiSS-‐9 can sustain a continuous 2h
immersion)
From -‐40C to 350C
EN ISO 4892-‐2
Only minor decrease of contact angle after abrasion test using quartz sand (ASTM F735-‐11)
Number of Cycles vs. Microfiber
Cloth
Number of Cycles vs. Cotton Rag
Number of
Wipes
HCI (5%)
Vinegar (5%)
H2O2 (5%)
Glass Cleaner
Bleach Multi-‐Purpose Cleaner
✓ ✓ Very good 4000 750 1500 ✓ ✕ ✓ ✓ ✕ ✓
APPLICATION METHODS STORAGE AND APPLICATION INFO
Consumer application • DIY kit: 100% consumer safe
Factory application • Spraying and orbital polishing
(http://youtu.be/VjX5xGfP0qI) (efficiency: 2m2 coated in 3.5’)
• Industrial roll-‐to-‐roll deposition system (deposition efficiency as per customer’s requirements)
CURING TIME AND APPLICATION CONDITIONS Deposition & curing time is 1-‐2 minutes in typical European outdoor conditions or on factory floors per meter squared. The surface needs to be dirt and particles clean prior to deposition of the coating. CONSUMPTION Empirical efficiency on glass is 1 liter for 125 m2. As it is a two-‐component solution, to cover 125 m2, you will need 1 liter of the first layer (primer) and 1 liter of the second layer (functionalization). PRODUCT STORAGE Container must be closed immediately after use to avoid moisture contamination. Shelf-‐life is 12 months, out of sunlight and at 25C. FILM MAINTENANCE AND DURABILITY MAINTENANCE The resulting film is resistant against typical household cleaning agents. Extended exposures to strong acids/bases (industrial grade) reaching continuous time durations of several tens of minutes can affect the film. DURABILITY Without any care: several years.