Swiming pool covers - BIOENERGY

swimming pool |covers

251

swimming pool | covers

Swimming poolcoversWhen we heat the water of our swimming pool the best feature we could add is to cover the pool to enjoy it all year round.

But this is not the only advantage of a pool cover. We shall also bear in mind that the size of the renewable energy installation requiered to heat the water is smaller and thus it is more economical as less heat loss occurs.

We can save in pool`s cleaning and water replacement as a great amount of evaporation is avoided.

A covered swimming pool gives security by preventing possible accidents.

No. OF MODULES 4LENGTH 8.40 mWIDTH 4.40 mSTRUCTURE COLOUR whiteSUPPORTS yesCOVER MATERIAL 8mm anti-UV cellular polycarbonateSTRUCTURE one part arches of structural aluminiumSCREWS stainless steel

TECHNICAL SPECIFICATIONS

L100

252


BIOENERGY LINE 100 cover is a protection shell for the swimming pool. It consists of individual one-radius curved modules that slide over the aluminium parts fixed to the ground. The modules are lifted individually to lean over the supports.

The opening mechanism is individual and the opening can be equally done from both sides. To fix the cover to the ground, the support hinges are fixed with stainless steel screws.

The facades as well as the roof that closes the facades of the cover contain 8mm cellular polycarbonate.

The height of the cover is approximately 60 cm at the top.

No. OF MODULES 4LENGTH 10.70 mWIDTH 4.75 mSTRUCTURE COLOUR whiteMATERIAL FOR SIDES AND FACADES 4mm transparent polycarbonateMATERIAL FOR COVER 8mm cellular polycarbonateRAIL EXTENSION yesSIDE SLIDING DOOR EXTENSION yesSTRUCTURE one part arches of structural aluminiumSCREWS stainless steelROLLING SYSTEM aluminium, fixation without screws


L200

253


BIOENERGY LINE 200 cover for swimming pools is a telescopic aluminium structure covered with transparent polycarbonate on the roof, sides and facades to create a favourable climate for a swim and to extend the swimming season giving the sensation of space thanks to its total transparency. The cover can be removed thanks to its telescopic structure.

The standard height is 1.05m at the top and its use is very practical. The arcade section has curved sides and gabled roof.

The side sliding door to access the swimming pool shall be installed only in the biggest module. The biggest module is fixed and telescopic depending on the necessities while the rest of the modules can be moved to remain under the fixed module. This will allow extending the rails and moving the cover completely to one end. All the modules are independent so that one person can easily move the cover.

The facades are fixed both to the smallest and the biggest modules and are completely transparent.

No. OF MODULES 5LENGTH 10.83mWIDTH 7.00mNUMBER OF DOORS 2 sliding doorsMATERIAL FOR SIDES AND FACADES 4mm transparent polycarbonateMATERIAL FOR COVER 8mm cellular polycarbonateROOF OPENING noSIDE DOORS OPENING noSTRUCTURE one joint arches of structural aluminiumSCREWS stainless steel


L300

254


BIOENERGY LINE 300 cover for swimming pools is an aluminium structure covered with polycarbonate on the roof, sides and facades to create a favourable climate for a swim and to extend the swimming season.

The standard height is 3.00m at the top and the separation from the sides shall not exceed 40cm to have the structure lifted up. The cover is very practical and habitable. The height and the outline can vary depending on the width of the cover. The arcade section has curved sides and gabled roof with a peak top.

It is enough to lift up the doors and leave them under the roof which will give us approximately a 2.20m doorway height.

The doors consist of two parts. The lower part can serve as a barrier for children and also air the inside of the cover. Since both parts of the door can be lifted up there is a hitching up system to lower both parts together. The doors have exclusive fixation systems which allow opening the doors with total security.

No. OF MODULES 4LENGTH 12.48 mWIDTH 7.0 mSTRUCTURE COLOUR whiteMATERIAL FOR SIDES AND FACADES 4mm transparent polycarbonateMATERIAL FOR COVER 8mm cellular polycarbonateJUNCTIONS noNUMBER OF DOORS 2STRUCTURE one joint arches of structural aluminiumROLLING SYSTEM aluminium, fixation without screws


L400

255


BIOENERGY LINE 400 cover for swimming pools is an aluminium structure covered with cellular polycarbonate on the roof and sides and with compact methacrylate facades to create a favourable climate for a swim and extend the swimming season. The cover can be removed thanks to its telescopic structure.

Each module has two aluminium arcades and oblong plastic sheet for the maximum length of 3.19m.

The standard height is 2.85-3.00m at the top and the separation from the sides shall not exceed 40cm to have the structure lifted up. The cover is very practical and habitable. The arcade section has curved sides and gabled roof with a peak top.

The biggest module is fixed to the ground while the rest of the modules can be moved to remain under the fixed module. All the modules are independent so that one person can move the cover easily.

The smallest module will have a movable front and once folded up under the biggest module it can be moved inside the module to the fixed facade leaving the cover gathered as a pavilion.

Documents

Swiming pool covers - BIOENERGY