SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5 ...5... · T8 . Deckover Tilt ; 42 . DR ; Rollster™ Roll Off Dump . 102 ; T9 . ... Torque Tube $12.50 / ft . 92HT (2) 7,000# w/235/85R16

SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5)

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.

** SWIFT Vendor Numbers: Provide the Swift Vendor Number (SWIFT ID) and Location Code (LOC CODE) for each Authorized Distributor. Each Authorized Distributor must have an accurate SWIFT ID.

** INSURANCE: All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditinos before any State Contract may be executed.

COMPANY NAME SWIFT ID LOC CODE

COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME

Central Trailer Sales VN0000259596_2 18661 Hwy 65, East Bet MN 55011 763-434-2277 Brian Renstrom

STATE OF MINNESOTAPRICING PAGE FIXED PRICE

TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC.

Vendor Name:Contact PersonStreet AddressP.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address

Spec # Information Requested Answer

1.0MAKE AND MODEL (See models in Central Trailer Sales PJ

Price List, 02/23/2018)

Warranty (Months/Years) 1 Year

BASE UNIT PRICE: $

2.0 LIST AVAILABLE OPTIONS

2.1 Mn/DOT Wiring and Lighting- Price per specs.

$150 (when not included in Standard Features)

2.2 Long Stroke brake chambers N/A

3.0 Discount off List Price for related parts and accessories ___________________% Discount

4.0 Shop Rates Per Hour4.1 Rate For Initial Inspection $4.2 Rate for Mechanical Work $75

5.0 Hot Dipped Galvanizing NA

6.0 DELIVERY STARTING POINT: City/State/Zip East Bethel, MN 55011See Special Terms and Conditions No Flat Rate Allowed

PRICE PER MILE FROM STARTING POINT: $2.50

RESPONDERS MUST USE THIS PRICE PAGE OR RESPONSE MAY BE REJECTED

[email protected]

East Bethel, MN 55011763-434-2277

763-434-2280

Central Trailer SalesBrian Renstrom18661 Hwy 65

mailto:[email protected]

Page 1 of 143 Printed 02/21/2018

Central Trailer Sales, Inc

(763) 434-2277 Table of Contents

Product Description Page Product Description Page

FS Classic Flatdeck with Singles 2 H6 8" Pro-Beam Super-Wide Equip 62

FD Classic Flatdeck with Duals 4 H7 10" Pro-Beam Super-Wide Equip 64

LS Low-Pro Flatdeck with Singles 6 P8 Angle Pipetop Trailer 66

LD Low-Pro Flatdeck with Duals 8 B5 5" Channel Buggy Hauler 68

L3 14" I-Beam Low-Pro with Duals 10 B6 6" Channel Super-Wide 70

FY Flatdeck with Hydraulic Dove 12 B8 8" Channel Super-Wide 72

LY Low-Pro with Hydraulic Dove 14 D5 60" Utility Dump 74

L6 Med. Duty Deckover 6" Channel 16 D3 72" Tandem Axle Dump 76

F8 8" I-Beam Deckover 18 D7 83" Tandem Axle Dump 78

PD Classic Pintle with Duals 20 DE 83" Wide-Side Dump 80

PL Low-Pro Pintle with Duals 22 DH 83" High Side Dump 82

TH 83" Hydraulic Quick Tilt 24 D9 83" XL Dump 84

T1 Single Axle HD Tilt 26 DC 83" XL High Side Dump 86

T5 5" Channel Tilt Carhauler 28 DL 83" Low Pro Dump 88

T6 6" Channel Equipment Tilt 30 DM 83" Low Pro High Side Dump 90

TJ HD Equipment Tilt 6" Channel 32 DJ 83" Low Pro XL Dump 92

TS 6" Channel Super-Wide Tilt 34 DK 83" Low Pro XL High Side Dump 94

TF Powered Full Tilt 36 D8 96" Deckover Dump 96

T7 8" Channel Tilt 38 DT 10" I-Beam Deckover Dump 98

TK HD Equipment Tilt 8" Channel 40 DD Tandem Dual Dump 100

T8 Deckover Tilt 42 DR Rollster™ Roll Off Dump 102

T9 HD Deckover Tilt 44 U6 60" Single Axle Channel Utility 104

TD Tandem Dual Tilt 46 UC 60" Tndm Axle Channel Utility 106

C4 4" Channel Carhauler 48 U2 72" Sngl Axle Channel Utility 108

C5 5" Channel Carhauler 50 UJ 72" Tndm Axle Channel Utility 110

CE 5" Channel Equipment 52 U7 77" Single Axle Channel Utility 112

CC 6" Channel Equipment 54 UK 77" Tndm Axle Channel Utility 114

C8 8" Channel Equipment 56 U8 83" Single Axle Channel Utility 116

H4 8" Pro-Beam Equipment 58 UL 83" Tndm Axle Channel Utility 118

H5 10" Pro-Beam Equipment 60



(763) 434-2277 Classic Flatdeck with Singles (FS)

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $229.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $143.00

L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $229.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $229.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00

* The trailer G.V.W.R. cannot exceed the coupler rating.

Primer + Red (Texas) (1) Red (r) Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w) Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$308.00

$369.00

$403.00 Grey (g)

Primer + Grey (Texas) (6)

$350.00

• 15,680 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder • 8' Ramps w/ Holders • 12" x 14 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up. • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

30' and up, upgrade to triple axle recommended 30' and up, upgrade to 19 lb. I-Beam recommended. *** MAX GVWR 24,000 with Triple 8k Axle Option ***

Bumper Pull Tongue Length (6' 9"), Gooseneck Length (8' 9").

F S R 2 0 7 2 B S S K FSR2072BSSK 20' Classic Flatdeck with Singles $6,260.00

FSR2272BSSK 22' Classic Flatdeck with Singles $6,426.00 FSR2472BSSK 24' Classic Flatdeck with Singles $6,593.00 FSR2572BSSK 25' Classic Flatdeck with Singles $6,675.00 FSR2672BSSK 26' Classic Flatdeck with Singles $6,757.00 FSR2872BSSK 28' Classic Flatdeck with Singles $6,924.00 FSR2972BSSK 29' Classic Flatdeck with Singles $7,008.00 FSR3072BSSK 30' Classic Flatdeck with Singles $7,154.00 FSR3272BSSK 32' Classic Flatdeck with Singles $7,321.00 FSR3472BSSK 34' Classic Flatdeck with Singles $7,486.00 FSR3572BSSK 35' Classic Flatdeck with Singles $7,568.00 FSR3672BSSK 36' Classic Flatdeck with Singles $7,653.00 FSR3872BSSK 38' Classic Flatdeck with Singles $7,817.00 FSR4072BSSK 40' Classic Flatdeck with Singles $7,984.00

1 2 3 4 5 6 7 8 9 10 11 Other


Classic Flatdeck with Singles (FS) Options

Axle Options: Other Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BT (2) 7,000# (Dexter) Electric / Torsion $296.00 4 Plate for Winch $150.00

72HS (2) 7,000# (Dexter) $1,575.00 6 6" Taller GN Riser $160.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² 7 Douglas Fir Lumber $8.44 / ft 72HT (2) 7,000# (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,871.00 9 Under Frame Tie Down Flat $3.13 / ft

73BS (3) 7000# (Dexter) Electric / Spring $1,024.00 A 19 lb. I-Beam Main Frame, Riser & Neck $12.50 / ft 73BT (3) 7000# (Dexter) Electric Torsion $1,468.00 B 22lb I-Beam Main Frame, Riser & Neck $19.06/ft

C 12"oc Crossmembers $198.75

(3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $3,830.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BS Electric / Spring²

92BT (2) 7,000# w/235/85R16 LR-G Tires (Dexter)

$459.00

Electric / Torsion² $755.00

92HS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) $1920.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring²

S Diamond Plate Ramp Bottoms $150.00

T Torque Tube $12.50 / ft

92HT (2) 7,000# w/235/85R16 L Elec/Hyd Disc (1,600 PSI

R-G Tires (Dexter)

Pump) / Torsion² $2,216.00

U Deck on the Neck (102" Wide 96" Long) $668.75

W Warn M12000 Winch w/Plate & Battery $2,771.25

93BS (3) 7,000# w/235/85R16 L Electric / Spring²

R-G Tires (Dexter) $1,711.00 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

K2BS (2)8,000# Oil Bath w/215/75R17.5LR-H Singles(Dexter)Electric/ Spring²

$2,583.00

-DR01 1 Pair D-Rings $41.25 -DS05 3/16" DP Steel Floor w/4 D-Rings & 12"oc $57.81 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $108.75

(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring² $1,809.00

(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,335.00

-LT10 Light Bar w/4 Lights $345.00 -RM30 No Ramps No Ramp Pockets -$156.25 -RT01 1 Pair Weld-On Strap Ratchets $63.75

82HT (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

(3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)

$4,126.00 -S201 1 Side-mount Toolbox 45"x17½" $397.50 -S401 1 Side-mount Toolbox 72"x17½" $653.75

83BS Electric / Spring² $3,736.00

83BT (3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Torsion²


$4,924.00

93HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $7,213.00

Tail Options:

Notes: ² Special Order Option: Requires additional confirmation lead-time.

S* Straight Deck w/ 8' Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $555.00 F 5' Dovetail w/ 2 Flip-over Ramps $470.00 T 5' Dovetail w/ 3 Flip-over Ramps $626.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

Z Ramp Support Arms $2,156.00

93HS $3,904.00

93HT $4,348.00

-BWFL Blackwood Classic Full Deck -BWOT Blackwood Classic Outer Deck -DL01 1 Pair of Flushmount D-Rings on Wood Floor -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor

$40.00 $33.13 / ft $19.38 / ft

$80.00 $41.25

E Rough Oak Floor $22.19 / ft 73HS (3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,386.00

82BT (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) $2,600.00 Electric / Torsion²

H K L

Receiver Hitch 4" Ratchets every 4ft w/ Slide Track Side Mount Wood Rack

$78.75 $28.75 / ft

$335.00

P R

11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc Frame Bridging

$48.13 / ft $213.75

-JA06 2 Hydraulic Monster Jacks™ -LT05 Add LED Reverse Lights

$1,972.50 $150.00

-SM02 2 Extra Side Marker Lights, 1 Per Side $70.00

73HT

82BS

82HS

-SP01 Under Frame Spare Tire and Mount $337.50 -TB03 Top Riser Toolbox $400.00



(763) 434-2277 Classic Flatdeck with Duals (FD)

F D R 2 0 A 2 B S S K FDR20A2BSSK 20' Classic Flatdeck with Duals $8,821.00

FDR22A2BSSK 22' Classic Flatdeck with Duals $9,018.00 FDR24A2BSSK 24' Classic Flatdeck with Duals $9,214.00 FDR25A2BSSK 25' Classic Flatdeck with Duals $9,316.00 FDR26A2BSSK 26' Classic Flatdeck with Duals $9,421.00 FDR28A2BSSK 28' Classic Flatdeck with Duals $9,631.00 FDR30A2BSSK 30' Classic Flatdeck with Duals $9,840.00 FDR32A2BSSK 32' Classic Flatdeck with Duals $10,050.00 FDR34A2BSSK 34' Classic Flatdeck with Duals $10,260.00 FDR35A2BSSK 35' Classic Flatdeck with Duals $10,363.00 FDR36A2BSSK 36' Classic Flatdeck with Duals $10,468.00 FDR38A2BSSK 38' Classic Flatdeck with Duals $10,679.00 FDR40A2BSSK 40' Classic Flatdeck with Duals $10,886.00 FDR42A2BSSK 42' Classic Flatdeck with Duals $11,096.00 FDR44A2BSSK 44' Classic Flatdeck with Duals $11,305.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $366.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $229.00


L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $229.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $229.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides


25' and up includes 19 lb. I-Beam Frame, Riser & Neck. Pintle hooks must upgrade to 19 lb. I-Beam.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** Bumper Pull Tongue Length (6' 11"), Gooseneck Length (8' 11").

1 2 3 4 5 6 7 8 9 10 11 Other


T Torque Tube $12.50 / ft

Classic Flatdeck with Duals (FD) Options

Axle Options: (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)

S2BS Electric / Spring²

$971.00

Other Options:

S2BT Electric / Torsion² $2,314.00 4 Plate for Winch $150.00 6 6" Taller GN Riser $160.00

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,954.00 9 Single Side Under Frame Tie Down Flat $3.13 / ft

A2BL (2) 10,000# Axles (Dexter) Electric / Air Ride w/ (1) Lift Axle²

$4,911.00 A 19 lb. I-Beam Main Frame, Riser & Neck $12.50 / ft

B 22 lb. I-Beam Main Frame, Riser & Neck $19.06 / ft A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,343.00

(2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $6,195.00

C 12"oc Crossmembers $198.75 E Rough Oak Floor $22.19 / ft H Receiver Hitch $78.75 K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft

(2) 10,000# Axles (Dexter) A2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$2,244.00 L Side Mount Wood Rack $335.00

A3BS (3) 10,000# Axles (Dexter) Electric / Spring $2,031.00 M 6" Axle Spread (Longer Equalizer) $198.75

(3) 10,000# Axles (Dexter)

$5,395.00 N 72" Axle Spread $277.50 A3HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) P 11ga (1/8") DP Stl Flr w/4D-Rings (CutFndrs) &12"oc $48.13 / ft

T2BS Electric / Spring² $826.00 R Frame Bridging $213.75

(2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) T2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$3,064.00 S Diamond Plate Ramp Bottoms $150.00

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,495.00 U Deck on the Neck (102" Wide 96" Long) $668.75 (2) 12,000# Axles (Dexter) C2BL Electric / Air Ride w/ (1) Lif

Lift Axle² $6,421.00 W Warn M12000 Winch w/Plate & Battery $2,771.25

C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,656.00 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

(2) 12,000# Axles (Dexter) C2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²


$7,389.00

Z Ramp Support Arms $40.00 -BWFL Blackwood Classic Full Deck $33.13 / ft

C2HL Elec/Hyd Disc (1,600 PSI Pump) / Air Ride w/ (1) Lift Axle²

$8,315.00

C2HS (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring

$3,551.00

C3BS (3) 12,000# Axles (Dexter) Electric / Spring $4,515.00

(3) 12,000# Axles (Dexter) C3HS Elec/Hyd Disc (1,600 PSI Pump) / Spring

(2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dexter)

$7,356.00

N2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $9,260.00

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,376.00

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) J2GS Elec/Hyd Drum (1,000 PSI Pump) / Spring

* Trailers with combined G.A.W.R. of 30,000 lbs or more

must add options B and C

Tail Options:

$6,424.00

Notes: A 5' Dovetail w/ 5' Slide-in Ramps $555.00 ² Special Order Option: Requires additional confirmation lead-time.

F 5' Dovetail w/ 2 Flip-over Ramps $470.00

T 5' Dovetail w/ 3 Flip-over Ramps $626.00

Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00

J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $798.00

E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $581.00

D2BS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) Electric / Spring $2,483.00

7 Douglas Fir Lumber $8.44 / ft S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter $3,214.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring²

0 1

Cold Weather Wiring Harness (7-Way RV) Hutch susp. H9700-Underslung Tandem Axle

$28.75 $1,151.25

-BWOT Blackwood Classic Outer Deck $19.38 / ft

S* Straight Deck w/ 8' Slide-in Ramps Incl.

A2HA

D2HS

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT10 Light Bar w/4 Lights $345.00 -RC01 1 - 38" Center Deck Roller $267.50 -RL01 Straight Deck Rolling Tail Board $1,032.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $412.50 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S201 1 Side-mount Toolbox 45"x17½" $397.50 -S401 1 Side-mount Toolbox 72"x17½" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00 -TB03 Top Riser Toolbox $400.00



(763) 434-2277 Low-Pro Flatdeck with Singles (LS)

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 15,680 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter E-Z Lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides


30' and up, upgrade to triple axle recommended. 30' and up, upgrade to 19 lb. I-Beam recommended. *** MAX GVWR 24,000 with Triple 8k Axle Option. ***

Gooseneck Length (8' 10")

L S R 2 0 7 2 B S S K LSR2072BSSK 20' Low-Pro Flatdeck with Singles $6,929.00

LSR2272BSSK 22' Low-Pro Flatdeck with Singles $7,094.00 LSR2472BSSK 24' Low-Pro Flatdeck with Singles $7,260.00 LSR2572BSSK 25' Low-Pro Flatdeck with Singles $7,344.00 LSR2672BSSK 26' Low-Pro Flatdeck with Singles $7,426.00 LSR2872BSSK 28' Low-Pro Flatdeck with Singles $7,591.00 LSR2972BSSK 29' Low-Pro Flatdeck with Singles $7,675.00 LSR3072BSSK 30' Low-Pro Flatdeck with Singles $7,823.00 LSR3272BSSK 32' Low-Pro Flatdeck with Singles $7,988.00 LSR3472BSSK 34' Low-Pro Flatdeck with Singles $8,155.00 LSR3572BSSK 35' Low-Pro Flatdeck with Singles $8,237.00 LSR3672BSSK 36' Low-Pro Flatdeck with Singles $8,319.00 LSR3872BSSK 38' Low-Pro Flatdeck with Singles $8,486.00 LSR4072BSSK 40' Low-Pro Flatdeck with Singles $8,652.00

1 2 3 4 5 6 7 8 9 10 11 Other


-S501 1 Side-mount Toolbox 72"x14" $653.75

Low-Pro Flatdeck with Singles (LS) Options


72BS * (2) 7,000# (Dexter) Electric / Spring Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BT (2) 7,000# (Dexter) Electric / Torsion $296.00 4 Plate for Winch $150.00

72HS (2) 7,000# (Dexter) $1,575.00 6 6" Taller GN Riser $160.00

Elec/Hyd Disc (1,600 PSI Pump) / Spring² 7 Douglas Fir Lumber $8.44 / ft 72HT (2) 7,000# (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,871.00 9 Under Frame Tie Down Flat $3.13 / ft 73BS (3) 7,000# (Dexter) Electric/Spring $1,024.00 A 19 lb. I-Beam Main Frame, Riser & Neck $12.50 / ft 73BT (3) 7,000# (Dexter) Electric/Torsion $1,468.00 B 22 lb. I-Beam Main Frame, Riser & Neck $19.06/ft


(3) 7,000# (Dexter) $3,830.00 Elec/Hyd Disc (1,600 PSI Pump) / Torsion²


(2) 7,000# w/235/85R16 LR-G Tires (Dexter)

$459.00

92BT Electric / Torsion² $755.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1920.00

S Diamond Plate Ramp Bottoms $150.00 T Torque Tube $12.50 / ft

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) U Deck on the Neck (102" Wide 96" Long) $668.75

92HT Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,216.00 W Warn M12000 Winch w/Plate & Battery $2,771.25

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) $1,711.00 93BS Electric / Spring²

R-

X Bulldog 2-speed Jacks (12,000 lb.) $197.50

K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring²

$2,583.00

-DR01 1 Pair D-Rings $41.25 -DS05 3/16" DP Steel Floor w/4 D-Rings & 12"oc $57.81 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $108.75


(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,335.00

-LT10 Light Bar w/4 Lights $345.00 -RL01 Straight Deck Rolling Tail Board $1,032.50 -RM30 No Ramps No Ramp Pockets -$156.25

82HT (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²


$4,126.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S301 1 Side-mount Toolbox 45"x14" $397.50

83BS Electric / Spring² $3,736.00


-SM02 2 Extra Side Marker Lights, 1 Per Side $70.00 -SP01 Under Frame Spare Tire and Mount $337.50

83HT (3) 8,000# Oil Bath w/235/ Elec/Hyd Disc (1,600 PSI

85R16 LR-G Tires (Dexter) Pump) / Torsion² $7,213.00

-TB03 Top Riser Toolbox $400.00

Tail Options:


S* Straight Deck w/ 8' Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $555.00 F 5' Dovetail w/ 2 Flip-over Ramps $470.00 T 5' Dovetail w/ 3 Flip-over Ramps $626.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

Z Ramp Support Arms $2,156.00

93HS $3,904.00

93HT $4,348.00

-BWFL Blackwood Classic Full Deck -BWOT Blackwood Classic Outer Deck -DL01 1 Pair of Flushmount D-Rings on Wood Floor -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor

$40.00 $33.13 / ft $19.38 / ft

$80.00 $41.25

E Rough Oak Floor $22.19 / ft 73HS (3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,386.00


H K L

Receiver Hitch 4" Ratchets every 4ft w/ Slide Track Side Mount Wood Rack

$78.75 $28.75 / ft

$335.00

P R

11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc Frame Bridging

$48.13 / ft $213.75

-JA06 2 Hydraulic Monster Jacks™ -LT05 Add LED Reverse Lights

$1,972.50 $150.00

73HT

82BS

82HS



(763) 434-2277 Low-Pro Flatdeck with Duals (LD)

L D R 2 0 A 2 B S S K LDR20A2BSSK 20' Low-Pro Flatdeck with Duals $9,504.00

LDR22A2BSSK 22' Low-Pro Flatdeck with Duals $9,696.00 LDR24A2BSSK 24' Low-Pro Flatdeck with Duals $9,888.00 LDR25A2BSSK 25' Low-Pro Flatdeck with Duals $9,992.00 LDR26A2BSSK 26' Low-Pro Flatdeck with Duals $10,094.00 LDR28A2BSSK 28' Low-Pro Flatdeck with Duals $10,299.00 LDR30A2BSSK 30' Low-Pro Flatdeck with Duals $10,505.00 LDR32A2BSSK 32' Low-Pro Flatdeck with Duals $10,710.00 LDR34A2BSSK 34' Low-Pro Flatdeck with Duals $10,916.00 LDR35A2BSSK 35' Low-Pro Flatdeck with Duals $11,017.00 LDR36A2BSSK 36' Low-Pro Flatdeck with Duals $11,120.00 LDR38A2BSSK 38' Low-Pro Flatdeck with Duals $11,327.00 LDR40A2BSSK 40' Low-Pro Flatdeck with Duals $11,531.00 LDR42A2BSSK 42' Low-Pro Flatdeck with Duals $11,737.00 LDR44A2BSSK 44' Low-Pro Flatdeck with Duals $11,943.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $366.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $229.00


L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $229.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $229.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder • 8' Ramps w/ Holders • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

Torsion Axle option will raise Deck Height 2". *** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ***


1 2 3 4 5 6 7 8 9 10 11 Other


-BWFL Blackwood Classic Full Deck -BWOT Blackwood Classic Outer Deck

$33.13 / ft $19.38 / ft

Low-Pro Flatdeck with Duals (LD) Options


(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) S2BS Electric / Spring² $971.00

0 Cold Weather Wiring Harness (7-Way RV)

4 Plate for Winch

S2BT (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)Electric / Torsion $2,314.00

7 Douglas Fir Lumber

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) 9 Under Frame Tie Down Flat

Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,214.00 B 22 lb. I-Beam Main Frame & Neck

A2AS (2) 10,000# Axles (Dexter) Air / Springª $5,168.00 C 12"oc Crossmembers

A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included E Rough Oak Floor

T2BS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter Electric / Spring

) $826.00

T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter Elec/Hyd Disc (1,600 PSI Pump) / Spring²

) $3,064.00 L M

Side Mount Wood Rack 6" Axle Spread (Longer Equalizer)


(3) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $7,356.00

R Frame Bridging $213.75 S Diamond Plate Ramp Bottoms $150.00 T Torque Tube $12.50 / ft

W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

(2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dexter) N2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)

$9,260.00 Z Ramp Support Arms $40.00

D2BS Electric / Spring $2,483.00

D2HS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,376.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 J2GS

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $6,424.00 -DR01 1 Pair D-Rings $41.25

-EL01 Add 7-Way RV Plug to Rear Bumper $108.75

*Trailers with combined G.A.W.R. of 30,000lbs or more must add options B and C

-JA01 HD 25k Jost 2x Jacks $592.50 ª Air brakes may affect placement of ramp holders -JA06 2 Hydraulic Monster Jacks™ $1,972.50

-LT05 Add LED Reverse Lights $150.00 Tail O ptions: -RC01 1 - 38" Center Deck Roller $267.50 S* Straight Deck w/ 2 Slide-in Ramps Incl. -RM30 No Ramps No Ramp Pockets -$156.25 A 5' Dovetail w/ 5' Slide-in Ramps $555.00 -RP01 2 - 17" Outer Deck Rollers $412.50 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $581.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 F 5' Dovetail w/ 2 Flip-over Ramps $470.00 -S301 1 Side-mount Toolbox 45"x14" $397.50 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $798.00 -S501 1 Side-mount Toolbox 72"x14" $653.75 T 5' Dovetail w/ 3 Flip-over Ramps $626.00 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00

W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00 Notes: ² Special Order Option: Requires additional confirmation lead-time. Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00

N 72" Axle Spread $277.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $48.13 / ft

C2HA (2) 12,000# Axles (Dexter Elec/Hyd Disc (1,600 PSI

) $7,389.00 Pump) / Air Ride²

C2HS (2) 12,000# Axles (Dexter Elec/Hyd Disc (1,600 PSI

) Pump) / Spring $3,551.00 C3BS (3) 12,000# Axles (Dexter ) Electric / Spring $4,515.00

C3HS

Page 10 of 143 Printed 02/21/2018


(763) 434-2277 14" I-Beam Low-Pro with Duals (L3)

L 3 H 2 0 C 2 B S S K L3H20C2BSSK 20' x 14" I-Beam Low-Pro with Duals $12,616.00

L3H22C2BSSK 22' x 14" I-Beam Low-Pro with Duals $12,876.00 L3H24C2BSSK 24' x 14" I-Beam Low-Pro with Duals $13,135.00 L3H25C2BSSK 25' x 14" I-Beam Low-Pro with Duals $13,265.00 L3H26C2BSSK 26' x 14" I-Beam Low-Pro with Duals $13,394.00 L3H27C2BSSK 27' x 14" I-Beam Low-Pro with Duals $13,525.00 L3H28C2BSSK 28' x 14" I-Beam Low-Pro with Duals $13,655.00 L3H30C2BSSK 30' x 14" I-Beam Low-Pro with Duals $13,913.00 L3H32C2BSSK 32' x 14" I-Beam Low-Pro with Duals $14,174.00 L3H34C2BSSK 34' x 14" I-Beam Low-Pro with Duals $14,432.00 L3H35C2BSSK 35' x 14" I-Beam Low-Pro with Duals $14,563.00 L3H36C2BSSK 36' x 14" I-Beam Low-Pro with Duals $14,693.00 L3H38C2BSSK 38' x 14" I-Beam Low-Pro with Duals $14,952.00 L3H40C2BSSK 40' x 14" I-Beam Low-Pro with Duals $15,211.00 L3H42C2BSSK 42' x 14" I-Beam Low-Pro with Duals $15,471.00

Standard Features

Coupler Options: H* GN 2 5/16" Round (30,000 lb.) w/ Toolbox Incl. E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $138.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $143.00 Primer + Red (Texas) (1)

Red (r) $308.00 Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w) Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$369.00

$403.00 Grey (g)


• 30,000 lb. G.V.W.R. • 12,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 30,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (12,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • 3" Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder • 8' Ramps w/ Holders • 14" x 5" x 22 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up • 3" Channel Crossmembers 16" on Center • 2 x 8 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

Torsion Axle option will raise Deck Height 2". GVWR over 26,000 lbs subject to US Federal Excise Tax.

Gooseneck Length (8' 11").

$350.00

1 2 3 4 5 6 7 8 9 10 11 Other

Page 11 of 143 Printed 02/21/2018

P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $48.13 / ft

14" I-Beam Low-Pro with Duals (L3) Options


A2BS (2) 10,000# Axles (Dexter) Electric / Spring ($1,656.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75 C2AA (2) 12,000# Axles (Dexter) Air / Air Rideª² $7,398.00 4 Plate for Winch $150.00 C2AS (2) 12,000# Axles (Dexter) Air / Springª² $3,560.00 7 Douglas Fir Lumber $8.44 / ft C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $3,838.00 9 Under Frame Tie Down Flat $3.13 / ft C2BS * (2) 12,000# Axles (Dexter) Electric / Spring Included C 12"oc Crossmembers $198.75


L Side Mount Wood Rack $335.00 M 6" Axle Spread (Longer Equalizer) $198.75

(2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $7,603.00

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) D2BS Electric / Spring

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter)

$825.00


D2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,719.00 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) J2GS Elec/Hyd Drum (1,000 PSI Pump) / Spring

Tail Options:

$4,766.00

Z Ramp Support Arms $40.00 -BWFL Blackwood Classic Full Deck $33.13 / ft

S* Straight Deck w/ 2 Slide-in Ramps Incl. 4 5' Dovetail w/ 4 Flip-over Ramps $786.00 A 5' Dovetail w/ 5' Slide-in Ramps $555.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $581.00 F 5' Dovetail w/ 2 Flip-over Ramps $470.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $798.00 T 5' Dovetail w/ 3 Flip-over Ramps $626.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00


C2HS (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring (3) 12,000# Axles (Dexter) Electric / Spring

$1,894.00

C3BS $2,858.00

C3HS (3) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $5,699.00

E H K

Rough Oak Floor Receiver Hitch 4" Ratchets every 4ft w/ Slide Track

$22.19 / ft $78.75

$28.75 / ft

R S T

Frame Bridging Diamond Plate Ramp Bottoms Torque Tube

$213.75 $150.00

$12.50 / ft


C2HA

N2HA

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT05 Add LED Reverse Lights $150.00 -RC01 1 - 38" Center Deck Roller $267.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $412.50 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S301 1 Side-mount Toolbox 45"x14" $397.50 -S501 1 Side-mount Toolbox 72"x14" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00

Page 12 of 143 Printed 02/21/2018


(763) 434-2277 Flatdeck with Hydraulic Dove (FY)

F Y R 3 0 A 2 B S S K FYR30A2BSSK 30' Flatdeck with Hydraulic Dove $13,613.00

FYR32A2BSSK 32' Flatdeck with Hydraulic Dove $13,796.00 FYR34A2BSSK 34' Flatdeck with Hydraulic Dove $13,979.00 FYR35A2BSSK 35' Flatdeck with Hydraulic Dove $14,070.00 FYR36A2BSSK 36' Flatdeck with Hydraulic Dove $14,162.00 FYR38A2BSSK 38' Flatdeck with Hydraulic Dove $14,345.00 FYR40A2BSSK 40' Flatdeck with Hydraulic Dove $14,528.00 FYR42A2BSSK 42' Flatdeck with Hydraulic Dove $14,711.00 FYR44A2BSSK 44' Flatdeck with Hydraulic Dove $14,894.00

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • Self Contained Hydraulic Unit • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides

• Lockable Front Toolbox w/ Chain Holder • 10' Hydraulic Dovetail • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up. • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5" x 7½ " West Craft Hyd. Cylinder • 5 year Dexter Axle Warranty

Air Suspension Option Trailer need to 36' or longer. Dovetail Hauling Capacity 4,000 lbs from center of Dovetail Forward. Dovetail Lift Capacity of 10,000 lbs from center of Dovetail Forward.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** *** Triple Axle Requires 38' and up. ***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 13 of 143 Printed 02/21/2018

Flatdeck with Hydraulic Dove (FY) Options

Axle Options: (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) S2BS Electric / Spring²

(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) S2RT Electric / Torsion²

$971.00

Other Options:

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride²


$4,911.00

7 Douglas Fir Lumber $8.44 / ft 9 Under Frame Tie Down Flat $3.13 / ft

A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,343.00


B 22 lb. I-Beam Main Frame & Neck $19.06 / ft C 12"oc Crossmembers $198.75 E Rough Oak Floor $22.19 / ft K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft

(2) 10,000# Axles (Dexter) A2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$2,244.00 L Side Mount Wood Rack $335.00

A3BS (3) 10,000# Axles (Dexter) Electric / Spring $2,031.00 M 6" Axle Spread (Longer Equalizer) $198.75

A3HS (3) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter)

$5,395.00

N 72" Axle Spread $277.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $48.13 / ft R Expanded Metal Traction Plates on Dovetail $345.00

T2BS Electric / Spring² $826.00 T Torque Tube $12.50 / ft U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Z 1x1 Angle Traction Bars on Rear of Deck $107.50

(2) 12,000# Axles (Dexter) C2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²


$7,389.00 -BWFT Blackwood Classsic Full Deck (Tail Only) $207.50 -BWHT Blackwood Classic Outer Deck (Tail Only) $137.50

C2HL Elec/Hyd Disc (1,600 PSI Pump) / Air Ride w/ (1) Lift Axle²

$8,315.00 -BWOT Blackwood Classic Outer Deck $19.38 / ft

(2) 12,000# Axles (Dexter) C2HA Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,551.00 C3BS (3) 12,000# Axles (Dexter) Electric / Spring $4,515.00

(3) 12,000# Axles (Dexter) $7,356.00 C3HS Elec/Hyd Disc (1,600 PSI Pump) / Spring

(2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dexter) N2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $9,260.00

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) $2,483.00 D2BS Electric / Spring

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) D2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,376.00

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) $6,424.00 J2GS Elec/Hyd Drum (1,000 PSI Pump) / Spring

* Trailers with combined G.A.W.R. of 30,000 lbs or more must add options B and C

Tail Options:


S* 10' Hydraulic Dovetail Incl. C 10' Hydraulic Self Cleaning Dovetail $574.00

-BWFL Blackwood Classic Full Deck $33.13 / ft

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,064.00

0 1


$28.75 $1,151.25

A2HA

$2,314.00 3 Hutch susp. H9700-Underslung Triple Axle $1,643.75

$3,214.00 4 Plate for Winch $150.00 5 Solar Battery Charger $135.00 $3,954.00 6 6" Taller GN Riser $160.00

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT10 Light Bar w/4 Lights $345.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S201 1 Side-mount Toolbox 45"x17½" $397.50 -S401 1 Side-mount Toolbox 72"x17½" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00 -TB03 Top Riser Toolbox $400.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $107.50

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,495.00

C2BL (2) 12,000# Axles (Dexter) Electric / Air Ride w/ (1) Lift Axle² $6,421.00


Page 14 of 143 Printed 02/21/2018


(763) 434-2277 Low-Pro with Hydraulic Dove (LY)

L Y R 3 0 A 2 B S S K LYR30A2BSSK 30' Low-Pro with Hydraulic Dove $14,269.00

LYR32A2BSSK 32' Low-Pro with Hydraulic Dove $14,452.00 LYR34A2BSSK 34' Low-Pro with Hydraulic Dove $14,635.00 LYR35A2BSSK 35' Low-Pro with Hydraulic Dove $14,727.00 LYR36A2BSSK 36' Low-Pro with Hydraulic Dove $14,818.00 LYR38A2BSSK 38' Low-Pro with Hydraulic Dove $15,001.00 LYR40A2BSSK 40' Low-Pro with Hydraulic Dove $15,184.00 LYR42A2BSSK 42' Low-Pro with Hydraulic Dove $15,368.00 LYR44A2BSSK 44' Low-Pro with Hydraulic Dove $15,551.00

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • Self Contained Hydraulic Unit • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape

• Monster Steps on Both Sides • Lockable Front Toolbox w/ Chain Holder • 10' Hydraulic Dovetail • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • Frame Bridge Standard on 30' and up. • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5" x 7½ " West Craft Hyd. Cylinder • 5 year Dexter Axle Warranty

Air Suspension Option Trailer need to 36' or longer. Dovetail Hauling Capacity 4,000 lbs from center of Dovetail Forward. Dovetail Lift Capacity of 10,000 lbs from center of Dovetail Forward.

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** *** Triple Axle Requires 38' and up. ***

Gooseneck Length (9').

1 2 3 4 5 6 7 8 9 10 11 Other

Page 15 of 143 Printed 02/21/2018

Low-Pro with Hydraulic Dove (LY) Options


(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $971.00 S2BS Electric / Spring²

0 Cold Weather Wiring Harness (7-Way RV) $28.75 1 Hutch susp. H9700-Underslung Tandem Axle $1,151.25

S2BT (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Electric/Torsion $2,314.00

3 Hutch susp. H9700-Underslung Triple Axle $1,643.75

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $3,214.00 4 Plate for Winch $150.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring² 5 Solar Battery Charger $135.00

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,954.00 6 6" Taller GN Riser $160.00 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included 7 Douglas Fir Lumber $8.44 / ft A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,343.00 8 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $103.13 / ft

(2) 10,000# Axles (Dexter) A2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride


$6,195.00 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame & Neck $19.06 / ft C 12"oc Crossmembers $198.75

A2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,244.00

A3BT (3) 10,000# Axles (Dexter) Electric / Torsion² $4,044.00

M 6" Axle Spread (Longer Equalizer) $198.75 N 72" Axle Spread $277.50 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $48.13 / ft R Expanded Metal Traction Plates on Dovetail $345.00

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride² $5,495.00 C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,656.00


(2) 12,000# Axles (Dexter) C2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring

$3,551.00

Z 1x1 Angle Traction Bars on Rear of Deck $107.50 -BWFL Blackwood Classic Full Deck $33.13 / ft


-BWHT Blackwood Classic Outer Deck (Tail Only) $137.50 -BWOT Blackwood Classic Outer Deck $19.38 / ft

* Trailers with combined G.A.W.R. of 30,000 lbs or more must add options B and C

Tail Options:


-BWFT Blackwood Classic Full Deck (Tail Only) $207.50

A3BS (3) 10,000# Axles (Dexter) Electric / Spring $2,031.00

A3HS (3) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) Electric / Spring

$5,395.00

T2BS $826.00

T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,064.00

C2HA


) $7,356.00 Pump) / Spring


(2) 12,000# w/235/85R16 D2BS Electric / Spring

LR-G Dual T&W (Dexter) $2,483.00

(2) 12,000# w/235/85R16 D2HA Elec/Hyd Disc (1,600 PSI

LR-G Dual T&W (Dexter) Pump) / Air Ride $8,214.00

(2) 12,000# w/235/85R16 D2HS Elec/Hyd Disc (1,600 PSI

LR-G Dual T&W (Dexter) $4,376.00 Pump) / Spring

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) J2GS Elec/Hyd Drum (1,000 PSI Pump) / Spring $6,424.00

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT10 Light Bar w/4 Lights $345.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S301 1 Side-mount Toolbox 45"x14" $397.50 -S501 1 Side-mount Toolbox 72"x14" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00 -TB03 Top Riser Toolbox $400.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $107.50

S* 10' Hydraulic Dovetail Incl. C 10' Hydraulic Self Cleaning Dovetail $574.00

T Torque Tube $12.50 / ft U Deck on the Neck (102" Wide 96" Long) $668.75

W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

E Rough Oak Floor $22.19 / ft K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft L Side Mount Wood Rack $335.00

Page 16 of 143 Printed 02/21/2018

$143.00


(763) 434-2277 Med. Duty Deckover 6" Channel (L6)

L 6 J 1 6 5 2 B S S K L6J1452BSSK 14' Med. Duty Deckover 6" Channel $4,418.00

L6J1652BSSK 16' Med. Duty Deckover 6" Channel $4,415.00 L6J1852BSSK 18' Med. Duty Deckover 6" Channel $4,491.00 L6J2052BSSK 20' Med. Duty Deckover 6" Channel $4,565.00 L6J2252BSSK 22' Med. Duty Deckover 6" Channel $4,641.00 L6J2452BSSK 24' Med. Duty Deckover 6" Channel $4,716.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) Primer + Red (Texas) (1)

Red (r) $308.00

Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$369.00

$403.00 Grey (g)


$350.00

Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w)

• 9,990 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axles (5,200 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 15" White Spoke Wheels • 4 - 225/75R15 Radial Tires • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape

• Tool Tray In Tongue • 6' Slide in Ramps w/ Holders • 6" Channel Tongue • 6" Channel Frame Main Frame • 3x2" Angle Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 101" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 *** Bumper Pull Tongue Length (5' 7").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 17 of 143 Printed 02/21/2018

Med. Duty Deckover 6" Channel (L6) Options


52BS * (2) 5,200# (Dexter) Electric / Spring Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 52BT (2) 5,200# (Dexter) Electric / Torsion $399.00 2 Upgrade to 2 X 10k Jacks $412.50

52KS (2) 5,200# (Dexter) Surge Disc [Surge Coupler] / $1,791.00 3 10k Jack (Bumper Pull) $137.50

Spring² 4 ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $79.38 / ft 52SS (2) 5,200# (Dexter)

Surge Hydraulic Drum [Surge Coupler] / Spring² $1,010.00 6 Upgrade to 235/80 R16 on 52k Axles w /1" Spacer $143.75

Tail Options: E Rough Oak Floor $22.19 / ft K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft M Mount Only for Spare Tire $35.00 N 2 3/8" Pipetop (Removable) $23.75 / ft P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

Q Front Toolbox (Bumper Pull) $198.75 T Spare Tire and Mount (Bumper Pull) $213.75 V V Shape Front Deck $221.25 -BWFL Blackwood Classic Full Deck $33.13 / ft

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00

-DR01 1 Pair D-Rings $41.25

-RT01 1 Pair Weld-On Strap Ratchets $63.75



-EL01 Add 7-Way RV Plug to Rear Bumper $108.75

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25


7 C

Douglas Fir Lumber 12"oc Crossmembers

$8.44 / ft $198.75

71BS (1) 7,000# (Dexter) Electric / Spring ($919.00)

S* Straight Deck w/24x 6 ft Slide-in Ramps Exp Metal Incl. A 3' Dovetail w/24x 6 ft Slide-in Ramps Exp Metal $238.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $238.00 C 3' Dovetail w/ 3, 16"x60" Foldup Ramps $398.00 D 3' Dovetail w/ 2, 31"x66"HD Foldup Ramps $605.00 J 3" Dovetail w/ 4' Heavy Duty Fold-up Gate $411.00 V 3' Dovetaill w/ Split Heavy Duty Gate $675.00

Page 18 of 143 Printed 02/21/2018


(763) 434-2277 8" I-Beam Deckover (F8)

F 8 J 1 6 7 2 B S S K F8J1672BSSK 16' x 8" I-Beam Deckover $4,846.00

F8J1872BSSK 18' x 8" I-Beam Deckover $5,011.00 F8J2072BSSK 20' x 8" I-Beam Deckover $5,178.00 F8J2272BSSK 22' x 8" I-Beam Deckover $5,342.00 F8J2472BSSK 24' x 8" I-Beam Deckover $5,509.00 F8J2672BSSK 26' x 8" I-Beam Deckover $5,674.00 F8J2772BSSK 27' x 8" I-Beam Deckover $6,025.00 F8J2872BSSK 28' x 8" I-Beam Deckover $6,114.00 F8J3072BSSK 30' x 8" I-Beam Deckover $6,309.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 C Rigid Mount Pintle Eye- Face-mount $91.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,293.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,064.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,064.00 T HD 2 5/16" Adj. Channel Mount 3 Bolt Coupler (25k) $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14.,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Tool Tray In Tongue • 6' 6" Slide in Ramps w/ Holders

• 8" x 10 lb. I-Beam Tongue • 8" x 10 lb. I-Beam Main Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 96" Wide Deck • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped with Lockable Front Toolbox • GN Equipped with Chain Holder • 5 year Dexter Axle Warranty

All 5ft. Dovetails or 8k axle options must include 102" wide option (R). *** 28' and 30' need to have Triple Axle Option Added. ***

*** MAX GVWR 24,000 with Triple 8k Axles and 24k+ Rated Coupler. *** Bumper Pull Tongue Length (6' 3").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 19 of 143 Printed 02/21/2018

8" I-Beam Deckover (F8) Options

Axle Options:

(2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,575.00

Tail Options: S* Straight Deck w/ 6'6" Slide-in Ramps Incl. A 3' Dovetail w/ 5' Slide-in Ramps (18' and up) $238.00 B 3' Dovetail w/ 2, 16"x60" Foldup Ramps $238.00 C 3' Dovetail w/ 3, 16"x60" Foldup Ramps $398.00 D 3' Dovetail w/ 2, 31"x66"HD Foldup Ramps $605.00 F 5' Dove with 2 Flipover Ramps (Must Have R opt) $555.00

J 3' Dovetail w/ 2 16"x60" Dbl Hinge Foldup Ramps $280.00

(2) 7,000# (Dexter) 72HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,871.00 M 3' Dovetail w/ 3 16"x60" Dbl Hinge Foldup Ramps $440.00

73BS (3) 7,000# (Dexter) Electric / Spring $1,024.00 73BT (3) 7,000# (Dexter) Electric / Torsion $1,468.00

P 4' Dove with 2 Flipover Ramps $454.00 R 4' Dove with 3 Flipover Ramps $614.00 T 5' Dove with 3 Flipover Ramps $715.00 U 5' Dove 3 31"x66" Fld Up Rmp.(Must Have R opt) $1,223.00

2 Monster Steps on Both Sides $71.25 4 Plate for Winch $150.00 7 Douglas Fir Decking $8.44 / ft

H Receiver Hitch $78.75 K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft

T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 Z Ramp Support Arms w/. Dove $40.00 -BWFL Blackwood Calssic Full Deck $33.13 / ft -BWOT Blackwood Classic Outer Deck $19.38 / ft

Electric / Torsion²


P Q R

11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc Front Toolbox (Bumper Pull) 102" Deck Width

$48.13 / ft $198.75 $207.50

M Mount Only for Spare Tire $35.00

E G

Rough Oak Floor 2nd Jack

$22.19 / ft $206.25

8 C

Full Size Toolbox (Bumper Pull) 12"oc Crossmembers

$276.25 $198.75

Other Options: 0 Cold Weather Wiring Harness (7-Way RV) $28.75

Y Z

4' Dove with 4ft. Monster Ramps (20' and up) 5' Dove 2 31"x66" Fld Up Rmp.(Must Have R opt)

$1,203.00 $1,085.00

G 3' Dovetail w/ 3 31"x66"HD Foldup Ramps $904.00

72GS (2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring² $1,445.00

72HS

52BS (2) 5,200# (Dexter) Electric / Spring $0.00 53BS (3) 5,200# (Dexter) Electric / Spring $1,025.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $296.00

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -FR01 Under Frame Fork Rack (96" Wide Only) $275.00 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT10 Light Bar w/4 Lights $345.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S101 1 Side-mount Toolbox 30"x14" $397.50 -SP01 Under Frame Spare Tire and Mount $337.50

73HS (3) 7,000# (Dexter) Elec/Hyd Disc (1600 PSI Pump) / Spring $3,386.00

(3) 7,000# (Dexter) 73HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $3,830.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BS Electric / Spring² $459.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $755.00 92BT Electric / Torsion²

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,920.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $2,216.00 92HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) 93BS Electric / Spring² $1,711.00

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) $2,156.00 93BT Electric / Torsion²


(3) 7,000# w/235/85R16 LR-G Tires (Dexter) $4,348.00 93HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

B2BS (2) 8,000# Oil Bath Axles, Electric / Spring²

235/80 LR-E Tires (Dexter) $1,409.00

(2) 8,000# Oil Bath w/215/ K2BS Singles(Dexter)

Electric / Spring²

75R17.5 LR-H $2,583.00

(2) 8,000# Oil Bath w/215/ K2HT Singles(Dexter)

75R17.5 LR-H $4,899.00

Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

82BS (2) 8,000# Oil Bath w/235/ Electric / Spring²

85R16 LR-G Tires (Dexter) $1,809.00

82BT (2) 8,000# Oil Bath w/235/ Electric / Torsion²


82HS (2) 8,000# Oil Bath w/235/ Elec/Hyd Disc (1,600 PSI

85R16 LR-G Tires (Dexter) $3,335.00 Pump) / Spring²

82SS (2) 8,000# Oil Bath w/235/ Surge Hydraulic Drum [Su

85R16 LR-G Tires (Dexter) rge Coupler] / Spring² $3,553.00



83BT (3) 8,000# Oil Bath w/235/ 85R16 LR-G Tires (Dexter) $4,924.00

Page 20 of 143 Printed 02/21/2018

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides

• Lockable Front Toolbox • 8' Ramps w/ Holders • 12" x 19 lb. I-Beam Main Frame • Frame Bridge Standard on 30' and up. • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. *** Bumper Pull Tongue Length (6' 11").

$143.00


(763) 434-2277 Classic Pintle with Duals (PD)

P D P 2 0 A 2 B S S K PDP20A2BSSK 20' Classic Pintle with Duals $8,561.00

PDP22A2BSSK 22' Classic Pintle with Duals $8,758.00













PDP44A2BSSK 44' Classic Pintle with Duals $10,916.00 Standard Features

Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00



Red (r) $308.00


$369.00

$403.00 Grey (g)


$350.00


1 2 3 4 5 6 7 8 9 10 11 Other

Page 21 of 143 Printed 02/21/2018

Classic Pintle with Duals (PD) Options

Axle Options: (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)

S2BS Electric / Spring² (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)

$971.00

Other Options:

S2BT Electric / Torsion² $2,314.00 4 Plate for Winch $150.00 7 Douglas Fir Lumber $8.44 / ft

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,954.00 B 22 lb. I-Beam Main Frame $6.56 / ft


$4,911.00 C 12"oc Crossmembers $198.75

E Rough Oak Floor $22.19 / ft A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included A2BT (2) 10,000# Axles (Dexter) Electric / Torsion² $1,343.00

(2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,244.00

H Receiver Hitch $78.75 K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft L Side Mount Wood Rack $335.00 M 6" Axle Spread (Longer Equalizer) $198.75 N 72" Axle Spread $277.50 P 11ga (1/8") DP Stl Flr w/4D-Rings (Cut Fndrs)

&12"oc $48.13 / ft

(2) 12,000# Axles (Dexter) Electric / Air Ride w/ (1) Lift Axle² $6,421.00

R Frame Bridging $213.75 S Diamond Plate Ramp Bottoms $150.00 T Torque Tube $12.50 / ft W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Z Ramp Support Arms $40.00

C2HL (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride w/ (1) Lift Axle²


C2HS (2) 12,000# Axles (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,551.00

C3BS (3) 12,000# Axles (Dexter)

C3HS (3) 12,000# Axles (Dexter) Elec/Hyd Disc

(1,600 PSI Pump)/Spring $7,356.00


(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) D2BS Electric / Spring $2,483.00

LR

D2HS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $4,376.00

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) $6,424.00 J2GS Elec/Hyd Drum (1,000 PSI Pump) / Spring

Tail Options:


9 Single Side Under Frame Tie Down Flat $3.13 / ft S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $3,214.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring²

0 1


$28.75 $1,151.25


C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,656.00 -BWFL Blackwood Classic Full Deck $33.13 / ft

A2HS

C2BL

(3) 10,000# Axles (Dexter) A3HS Elec/Hyd Disc (1600 PSI Pump) / Spring $5,395.00

(2) 10,000# w/235/85R16 LR-G Dual T&W (Dexter) $826.00 T2BS Electric / Spring²

LR

(2) 10,000# w/235/85R16 LR-G Dual T&W (Dexter) $3,064.00 T2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring

LR-G

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride $5,495.00

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -RC01 1 - 38" Center Deck Roller $267.50 -RL01 Straight Deck Rolling Tail Board $1,032.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $412.50 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S201 1 Side-mount Toolbox 45"x17½" $397.50 -S401 1 Side-mount Toolbox 72"x17½" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00

S* Straight Deck w/ 8' Slide-in Ramps Incl. A 5' Dovetail w/ 5' Slide-in Ramps $555.00 E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $581.00 F 5' Dovetail w/ 2 Flip-over Ramps $470.00 J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $798.00 T 5' Dovetail w/ 3 Flip-over Ramps $626.00 W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00 Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00

Page 22 of 143 Printed 02/21/2018

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Side Steps on Both Sides

• Lockable Front Toolbox • 8' Ramps w/ Holders • 12" x 19 lb. I-Beam Main Frame • Frame Bridge Standard on 30' and up • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Amber Side Turn Flashers • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated

Torsion Axle option will raise Deck Height 2". *** MAX GVWR 36,000 on Pintle Coupler with 15k or Triple 12k Axles. ***

Bumper Pull Tongue Length (6' 11").

$143.00


(763) 434-2277 Low-Pro Pintle with Duals (PL)

P L P 2 0 A 2 B S S K PLP20A2BSSK 20' Low-Pro Pintle with Duals $9,245.00

PLP22A2BSSK 22' Low-Pro Pintle with Duals $9,437.00











PLP40A2BSSK 40' Low-Pro Pintle with Duals $11,272.00 Standard Features

Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00



Red (r) $308.00


$369.00

$403.00 Grey (g)


$350.00


1 2 3 4 5 6 7 8 9 10 11 Other

Page 23 of 143 Printed 02/21/2018

Low-Pro Pintle with Duals (PL) Options


(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $971.00 S2BS Electric / Spring²

0 Cold Weather Wiring Harness (7-Way RV) $28.75 4 Plate for Winch $150.00

S2BT (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Electric / Torsion $2,314.00

7 Douglas Fir Lumber $8.44 / ft

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $3214.00 9 Under Frame Tie Down Flat $3.13 / ft Elec/Hyd Disc (1,600 PSI Pump) / Spring² B 22 lb. I-Beam Main Frame $19.06 / ft

A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $3,954.00 C 12"oc Crossmembers $198.75 A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included E Rough Oak Floor $22.19 / ft A2BT (2) 10,000# Axles (Dexter) Electric / Torsion $1,343.00 H Receiver Hitch $78.75

(2) 10,000# Axles (Dexter) A2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²


$6,195.00 K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft L Side Mount Wood Rack $335.00 M 6" Axle Spread (Longer Equalizer) $198.75

A2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $2,244.00

A3BT (3) 10,000# Axles (Dexter) Electric / Torsion² $4,044.00

S Diamond Plate Ramp Bottoms $150.00 T Torque Tube $12.50 / ft W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

C2BS (2) 12,000# Axles (Dexter) Electric / Spring $1,656.00 -BWFL Blackwood Classic Full Deck $33.13 / ft -BWOT Blackwood Classic Outer Deck $19.38 / ft


) Pump) / Spring $3,551.00

C3BS (3) 12,000# Axles (Dexter ) Electric / Spring $4,515.00


) Pump) / Spring $7,356.00

(2) 12,000# w/215/75R17.5" LR-H Dual T&W (Dexter) $9,260.00 N2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride²

(2) 12,000# w/235/85R16 D2BS Electric / Spring

LR-G Dual T&W (Dexter) $2,483.00

(2) 12,000# w/235/85R16 D2HS Elec/Hyd Disc (1,600 PSI

LR-G Dual T&W (Dexter) $4,376.00 Pump) / Spring

(2) 15,000# w/215/75R17.5" LR-H Dual T&W (Dexter) J2GS Elec/Hyd Drum (1,000 PSI Pump) / Spring $6424.00

Tail Options:

4 5' Dovetail w/ 4 Flip-over Ramps $786.00

E 5' Dovetail w/ 2 Flip-over Ramps w/HD Gusset $581.00


J 5' Dovetail w/ 3 Flip-over Ramps w/HD Gusset $798.00

W 5' Dovetail w/ 2 Flip-over Monster Ramps $1,270.00

Z 5' Dovetail w/ Power Tail (Pat. Pend. TX Only) $3,023.00

T 5' Dovetail w/ 3 Flip-over Ramps $626.00

F 5' Dovetail w/ 2 Flip-over Ramps $470.00

S* Straight Deck w/ 2 Slide-in Ramps Incl.


A3HS (3) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) Electric / Spring

$5,395.00

T2BS $826.00

T2HS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,064.00

Z Ramp Support Arms $40.00

C2HA (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $7,389.00

A 5' Dovetail w/ 5' Slide-in Ramps $555.00

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT05 Add LED Reverse Lights $150.00 -RC01 1 - 38" Center Deck Roller $267.50 -RM30 No Ramps No Ramp Pockets -$156.25 -RP01 2 - 17" Outer Deck Rollers $412.50 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -S301 1 Side-mount Toolbox 45"x14" $397.50 -S501 1 Side-mount Toolbox 72"x14" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00

N 72" Axle Spread $277.50 P 11ga (1/8") DP Steel Floor w/4 D-Rings & 12"oc $48.13 / ft R Frame Bridging $213.75

Page 24 of 143 Printed 02/21/2018


(763) 434-2277 83" Hydraulic Quick Tilt (TH)

T H J 1 6 3 2 C S T K THJ1632CSTK 16' x 83" Hydraulic Quick Tilt $4,265.00

THJ1832CSTK 18' x 83" Hydraulic Quick Tilt $4,309.00 THJ2032CSTK 20' x 83" Hydraulic Quick Tilt $4,354.00 THJ2232CSTK 22' x 83" Hydraulic Quick Tilt $4,398.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. D BP 2" Adjustable $0.00 P 3" Pintle Eye - Channel-mount $0.00

Powder Coat Color Options: Black (k) * Incl. Desert Tan (t) Grey (g)


Red (r) Tractor Green (j) Tractor Orange (n) White (w)

$65.00

• 7,000 lb. G.V.W.R. • 3,500 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Top Wind Drop-Leg Jack (8,000 lb.) • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-eye Spring Suspension • 4 - 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Aluminum Fenders

• 5" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Canadian Spruce Pine Fir Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • Hydraulic Power Up & Down • Integrated 12V Trickle Charger • Stake Pockets • 5 year Dexter Axle Warranty

16' Trailer must have Drop Axles. *** MAX GVWR 10,400 with 5,200 lb Axle Option. ***

***Trailer will have 80" Frame with Drop Axles. *** Bumper Pull Tongue Length (4' 3").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 25 of 143 Printed 02/21/2018

83" Hydraulic Quick Tilt (TH) Options

Axle Options: Other Options: 32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $294.00 4 Plate for Winch $150.00 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 8 2 Stake Pockets In Front of Trailer $13.75 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $476.00 F Steel Diamond Plate Fenders $0.00 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 Q Rubrail $5.31 / ft 52CS (2) 5,200# (Dexter) One Electric / Spring $316.00 S 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings & $30.63 / ft 52ES (2) 5,200# (Dexter) Electric / Spring $554.00 16"oc

T Mount Only for Spare Tire $35.00

Tail Options: V Spare Tire and Mount $135.00

T* Tilt Deck Incl. -BWFL Blackwood Classic Full Deck $27.19 / ft


-BWOT Blackwood Classic Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25

Page 26 of 143 Printed 02/21/2018


(763) 434-2277 Single Axle HD Tilt (T1)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: D* BP 2" Adjustable Incl. J BP 2 5/16" Adjustable $0.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $0.00


* The trailer G.V.W.R. cannot exceed the coupler rating. Primer + Red (Texas) (1) Red (r) $308.00


$369.00

$403.00 Grey (g)


$350.00


• 7,000 lb. G.V.W.R. • 7,000 lb. x 1 G.A.W.R. • 2" Ball Adjustable Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (8,000 lb.) • 1 - Dexter E- Z lube Brake Drop Axle (7,000 lb) • 2 - 16" White Spoke Wheels • 2 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • Removable Tread-plate Steel Fenders • Expanded Metal Tool Tray In Tongue • 11 Degree Tilt Angle • Hydraulic Cushion Cylinder w/ Reservoir

• 5" Channel Tongue • 5” x 2” Steel Tube Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 81" x 13’ Tilting Deck • 81" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Knife Edge Tail • 4 Recessed D-rings & 1 Center D-ring • Bull Nose Bumper • Mitered Front Corners • 5 year Dexter Axle Warranty

Bumper Pull Tongue Length (5').

T 1 D 1 3 7 1 B D T K T1D1371BDTK 13' Single Axle HD Tilt $3,913.00

T1D1671BDTK 16' Single Axle HD Tilt $4,179.00

Page 27 of 143 Printed 02/21/2018

Single Axle HD Tilt (T1) Options


B Solar Battery Charger $135.00 C 12"oc Crossmembers $198.75 E Rough Oak Floor $19.38 / ft H Power up Power down Tilt $716.25 K Power Up/Down & Gravity Down $910.00

51BD (1) 5,200# (Dexter) Electric / Drop Axle ($60.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75 71BD * (1) 7,000# (Dexter) Electric / Drop Axle Included 3 Upgrade to Single 10k Jack (Bumper Pull) $137.50

(1) 7,000# (Dexter) 4 Plate for Winch $150.00 71SD Surge Hydraulic Drum [Surge Coupler] / Drop Axle $540.00

(1) 7,000# w/235/85R16 LR-G Tires (Dexter) 91BD Electric / Drop Axle $229.00

(1) 7,000# w/235/85R16 LR-G Tires (Dexter) 91SD Surge Hydraulic Drum [Surge Coupler] / Drop $769.00

Axle


Tail Options: T* Tilt Deck Incl.

M Mount Only for Spare Tire $35.00 P 11 GA(1/8”)DP Steel Floor w/4 Flushmount D-Rings &

16oc $46.56/FT

Q Front Toolbox (Bumper Pull & Pintle) $198.75 R Expanded Metal Traction Plate on Tailboard $345.00 T Spare Tire and Mount (Bumper Pull)

$206.25

Y 1x1 Angle Traction Bars on Rear of Deck $92.50 Z Roller on Front of Deck for Winch Cable $160.00 -BWFL Blackwood Classic Full Deck $27.19/FT -BWOT Blackwood Classic Outer Deck $16.25/FT -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -DR07 7 Pair D-Rings $291.25 -FE05 Weld on Fenders $70.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $336.25 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $281.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $92.50 -WN08 Warn 8k Zeon Winch w/Plate & Battery $1505.00 -WN95 SuperWinch TS9500 w/Plate & Battery $1063.75 -WP03 Winch Plate w/ Welded Receiver Hitch $230.00

Page 28 of 143 Printed 02/21/2018


(763) 434-2277 5" Channel Tilt Carhauler (T5)

T 5 J 1 6 3 2 E S T K T5J1632ESTK 16' x 5" Channel Tilt Carhauler $4,581.00

T5J1832ESTK 18' x 5" Channel Tilt Carhauler $4,620.00 T5J2032ESTK 20' x 5" Channel Tilt Carhauler $4,659.00 T5J2232ESTK 22' x 5" Channel Tilt Carhauler $4,698.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. 2 BP 2" A-Frame $0.00 A BP 2 5/16" A-Frame $0.00 D BP 2" Adjustable $0.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Equipment Yellow (y) Grey (g)

M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $0.00

Red (r) Tractor Green (j) White (w)

$65.00

P 3" Pintle Eye - Channel-mount $0.00


Primer + Black (Texas) (0) $143.00 Primer + Red (Texas) (1) Desert Tan (t) Primer + Desert Tan (Texas) (8) $350.00

$369.00

Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

• 7,000 lb. G.V.W.R. • 3,500 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Top Wind Drop-Leg Jack (8,000 lb.) • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-eye Spring Suspension • 4 - 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger

• 9" x 72" Treadplate Aluminum Fenders • 11 Degree Tilt Pitch • 5" Channel Frame & Tongue • 3" Channel Crossmembers 24" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • 75" Wide Tiltable Deck • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • DOT Approved Flushmount Lifetime LED Lights • 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 with 5200 lb Axle Option. *** 16" on center standard with 5,200 lb Axles.


$308.00

1 2 3 4 5 6 7 8 9 10 11 Other

Page 29 of 143 Printed 02/21/2018

5" Channel Tilt Carhauler (T5) Options

Axle Options: Other Options: Tail Options:

S 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings & 16"oc

$27.50 / ft

T* Tilt Deck Incl. T Mount Only for Spare Tire $35.00

V

Spare Tire and Mount $135.00

X 16"oc Crossmembers $203.75

Y 1x1 Angle Traction Bars on Rear of Deck $92.50

Z Roller on Front of Deck for Winch Cable $160.00


-BWOT Blackwood Classic Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -TB01 Front Toolbox $197.50


32CS (2) 3,500# (Dexter) One Electric / Spring ($171.00) 3 10k Jack (Bumper Pull) $137.50 32ES * (2) 3,500# (Dexter) Electric / Spring Included 4 Plate for Winch $150.00 52CS (2) 5,200# (Dexter) One Electric / Spring $271.00 5 Upgrade to 235/80 R16 on 52k Axles $127.50 52ES (2) 5,200# (Dexter) Electric / Spring $434.00 F Steel Diamond Plate Fenders $0.00

52SS (2) 5,200# (Dexter) $1276.00 Surge Hydraulic Drum [Surge Coupler] / Spring²

K Smooth Steel Fenders $0.00 M Open Pit Steel Floor w4 Flushmount D-Rings $335.00

Page 30 of 143 Printed 02/21/2018


(763) 434-2277 6" Channel Equipment Tilt (T6)

T 6 J 1 6 7 2 B T T K T6J1672BTTK 16' x 6" Channel Equipment Tilt $5,763.00

T6J1872BTTK 18' x 6" Channel Equipment Tilt $5,907.00 T6J2072BTTK 20' x 6" Channel Equipment Tilt $6,051.00 T6J2272BTTK 22' x 6" Channel Equipment Tilt $6,196.00 T6J2472BTTK 24' x 6" Channel Equipment Tilt $6,340.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,430.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,293.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,064.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,064.00 T HD 2 5/16" Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k) $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue

• 11 Degree Tilt Pitch • 3" x 16" Cylinder • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 74" Wide Tiltable Deck • 82" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 10 year Dexter Torflex Axle Warranty

*** 8" I-beam on Goosenecks. *** Triple Axle Available on 22' and Longer

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . *** *** Tilting Deck Length is 17' 2" ***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 31 of 143 Printed 02/21/2018

6" Channel Equipment Tilt (T6) Options


Tail Options:

E Rough Oak Floor $19.38 / ft G 2nd Jack (Bumper Pull) $206.25 H Power up Power down Tilt $716.25 K Power Up/Down & Gravity Down $910.00

T* 16' Tilt Deck Incl. M Mount Only for Spare Tire $35.00

P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings & 12"oc

$48.13 / ft

Q Front Toolbox (Bumper Pull & Pintle) $198.75 R Expanded Metal Traction Plate on Tailboard $345.00 S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $89.38 / ft T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y 1x1 Angle Traction Bars on Rear of Deck $92.50 Z Roller on Front of Deck for Winch Cable $160.00

-BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft

-BWPF Blackwood Pro Full Deck $31.56 / ft -BWPO Blackwood Pro Outer Deck $20.31 / ft

-CH05 GN Lockable Chain Holder $148.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25

-FR01 Fork Rack (18' and Longer) $275.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50

-JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT10 Light Bar w/4 Lights $345.00

-RT01 1 Pair Weld-On Strap Ratchets $63.75 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $336.25

-TB03 Top Riser Toolbox $482.50 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $92.50


2 20ft Power Up/Down Tilt Deck $861.25 3 22ft Power Up/Down Tilt Deck $1,036.25

4 Plate for Winch $150.00 6 6" Taller GN Riser $160.00

7 Douglas Fir Lumber $7.19 / ft 9 9,990 G.V.W.R $0.00 B Solar Batter Charger $135.00 C 12”oc Crossmembers $198.75

72KT (2) 7000# (Dexter) Surge Disc (Surge Coupler) / Torsion2 $1584.00

(2) 7,000# (Dexter) 72ST Surge Hydraulic Drum [

(Surge Coupler) / Torsion² $1,080.00

73BT (3) 7,000# (Dexter) Electric / Torsion²

(3) 7,000# (Dexter) 73GT Elec/Hyd Drum (1,000 PSI Pump) / Torsion² $3,340.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $460.00 92BT Electric / Torsion

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) 93BT Electric / Torsion² $1,861.00

72BT * (2) 7,000# (Dexter) Electric / Torsion Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75

72GT (2) 7,000# (Dexter) Elec/Hyd Drum (1000 PSI Pump) / Torsion2 $1,446.00 1 18ft Power Up\Down Tilt Deck $777.50

Page 32 of 143 Printed 02/21/2018


(763) 434-2277 HD Equipment Tilt 6" Channel (TJ)

T J T 1 6 8 2 B T T K TJT1682BTTK 16' HD Equipment Tilt 6" Channel $8,160.00

TJT1882BTTK 18' HD Equipment Tilt 6" Channel $8,314.00 TJT2082BTTK 20' HD Equipment Tilt 6" Channel $8,468.00 TJT2282BTTK 22' HD Equipment Tilt 6" Channel $8,621.00 TJT2482BTTK 24' HD Equipment Tilt 6" Channel $8,775.00

Standard Features

Coupler Options: T* HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $35.00 C Rigid Mount Pintle Eye- Face-mount (25,000) $91.00


E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,374.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,236.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,236.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,236.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,009.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,009.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $0.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00 X HD 2 5/16" Adj Ch Mnt 3 Bolt 20k w/8 Hole Ch Brckt $35.00


Primer + Red (Texas) (1) Red (r) Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w) Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n) Grey (g) Primer + Grey (Texas) (6)

$308.00

$369.00

$350.00

• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • Dexter Torflex® Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/85R16 14 Ply Radial Trs (4,080 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 10" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue


*** 8" I-beam on Goosenecks. *** Triple Axle Available on 22' and Longer

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . *** *** Tilting Deck Length is 17' 2" ***


$403.00

1 2 3 4 5 6 7 8 9 10 11 Other

Page 33 of 143 Printed 02/21/2018

HD Equipment Tilt 6" Channel (TJ) Options


(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion ($1,101.00)

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) B2BT Electric / Torsion

(2) 8,000# Oil Bath w/215/75R17.5 LR-H

($400.00)

K2BT Singles(Dexter) Electric / Torsion

$774.00

82BT * (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Torsion

Tail Options:

Included

T* 16' Tilt Deck Incl.

72BT (2) 7,000# (Dexter) Electric / Torsion ($1,635.00)

92BT

0 Cold Weather Wiring Harness (7-Way RV) $28.75 4 Plate for Winch $150.00 6 6" Taller GN Riser $160.00 7 Douglas Fir Lumber $7.19 / ft 9 9,990 G.V.W.R. $0.00 B Solar Battery Charger $135.00 C 12"oc Crossmembers $198.75 E Rough Oak Floor $19.38 / ft G 2nd Jack (Bumper Pull) $206.25 H Power up Power down Tilt $716.25 K Power Up/Down & Gravity Down $910.00 M Mount Only for Spare Tire $35.00 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

Q Front Toolbox (Bumper Pull & Pintle) $198.75 R Expanded Metal Traction Plate on Tailboard $345.00 S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $89.38 / ft T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y 1x1 Angle Traction Bars on Rear of Deck $92.50 Z Roller on Front of Deck for Winch Cable $160.00 -BTRY 1 Extra Battery $233.75 -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -BWPF Blackwood Pro Full Deck $31.56 / ft -BWPO Blackwood Pro Outer Deck $20.31 / ft -CH05 GN Lockable Chain Holder $148.75 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $1,002.50 -DR01 1 Pair D-Rings $41.25 -FR01 Fork Rack $275.00 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $53.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $312.50 -LT10 GN Light Bar w/4 Lights (GN Only) $345.00 -TB03 Top Riser Toolbox $482.50 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $92.50

Page 34 of 143 Printed 02/21/2018

$143.00


(763) 434-2277 6" Channel Super-Wide Tilt (TS)

T S J 1 6 7 2 B T T K TSJ1672BTTK 16' x 6" Channel Super-Wide Tilt $6,730.00

TSJ1872BTTK 18' x 6" Channel Super-Wide Tilt $6,872.00 TSJ2072BTTK 20' x 6" Channel Super-Wide Tilt $7,014.00 TSJ2272BTTK 22' x 6" Channel Super-Wide Tilt $7,156.00 TSJ2472BTTK 24' x 6" Channel Super-Wide Tilt $7,298.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable Incl. P 3" Pintle Eye - Channel-mount (21,000 lb.) $0.00



Red (r) $308.00


$369.00

$403.00 Grey (g)


$350.00


• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • 2 5/16" Ball Adjustable Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb.) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • Drive Over DP Steel Fenders

• 11 Degree Tilt Pitch • 3" x 16" Cylinder • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102" Wide Tiltable Deck • 83" Between Fenders • DOT Approved Flushmount Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • 10 year Dexter Torflex Axle Warranty

*** 8" I-beam on Goosenecks. *** *** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . ***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 35 of 143 Printed 02/21/2018

6" Channel Super-Wide Tilt (TS) Options

Axle Options: Other Options: Notes:

(2) 7,000# (Dexter) 72GT Elec/Hyd Drum (1,000 PSI Pump) / Torsion² $1,446.00 ² Special Order Option: Requires additional confirmation lead-time.

(2) 7,000# (Dexter) 72KT Surge Disc [Surge Cou pler] / Torsion² $1,584.00

(2) 7,000# (Dexter) 72ST Surge Hydraulic Drum [Surge Coupler] / Torsion² $1,080.00


Tail Options:


72BT * (2) 7,000# (Dexter) Electric / Torsion Included

Page 36 of 143 Printed 02/21/2018


(763) 434-2277 Powered Full Tilt (TF)

T F J 1 8 7 2 B T T K TFJ1872BTTK 18' Powered Full Tilt $6,553.00

TFJ2072BTTK 20' Powered Full Tilt $6,703.00 TFJ2272BTTK 22' Powered Full Tilt $6,854.00 TFJ2472BTTK 24' Powered Full Tilt $7,574.00

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • Lockable Toolbox In Tongue • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center

• 2" Treated Pine Lumber Deck • 74" Wide Tiltable Deck • 82" Between Fenders • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Hydraulic Power Up & Down • Twin 3" X 16" Cylinders • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 3"x 16" w/o 8"ch. & 3" x 25" w/8"ch or 24' lengths • 10 year Dexter Torflex Axle Warranty

*** 24' has 8" Channel frame & 12" I-beam Neck. *** See T6 For Gravity Tilt.

*** MAX GVWR 15,680 with Tandem 7k Axle Option and Gooseneck Option . *** Bumper Pull Tongue Length (5' 3"), Gooseneck Length (8' 6").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 37 of 143 Printed 02/21/2018

Powered Full Tilt (TF) Options


72BT * (2) 7,000# (Dexter) Electric / Torsion Included

(2) 7,000# (Dexter) $1,446.00 72GT Elec/Hyd Drum (1,000 PSI Pump) / Torsion²

(2) 7,000# (Dexter) 72KT Surge Disc [Surge Coupler] / Torsion² $1,584.00

(2) 7,000# (Dexter) 72ST Surge Hydraulic Drum [ Surge Coupler] / Torsion² $1,080.00 73BT (3) 7,000# (Dexter) Electric / Torsion $1,173.00



Tail Options: T* Tilt Deck Incl.

52BT (2) 5,200# (Dexter) Electric / Torsion² ($67.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75 4 Plate for Winch $150.00 5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00 7 Douglas Fir Lumber $7.19 / ft 8 8" Channel Upgrade $26.88 / ft 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $198.75 E Rough Oak Floor $19.38 / ft G 2nd Jack (Bumper Pull) $207.50 M Mount Only for Spare Tire $35.00 N Diamond Plate Running Boards $9.69 / ft P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

R 102" Deck Width From Fenders to Front of Deck $27.19 / ft S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $89.38 / ft T Spare Tire and Mount (Bumper Pull) $207.50 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y 1x1 Angle Traction Bars on Rear of Deck $92.50 Z Roller on Front of Deck for Winch Cable $141.25 -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -HY05 Power Up/Down & Gravity Down Upgrade $172.50 -LT10 Light Bar w/4 Lights $345.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50 -TB03 Top Riser Toolbox $482.50 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $86.25 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $92.50

Page 38 of 143 Printed 02/21/2018


(763) 434-2277 8" Channel Tilt (T7)

T 7 J 1 6 7 2 B T T K T7J1672BTTK 16' x 8" Channel Tilt $6,134.00

T7J1872BTTK 18' x 8" Channel Tilt $6,331.00 T7J2072BTTK 20' x 8" Channel Tilt $6,528.00 T7J2272BTTK 22' x 8" Channel Tilt $6,724.00 T7J2472BTTK 24' x 8" Channel Tilt $6,921.00 T7J2672BTTK 26' x 8" Channel Tilt $7,118.00 T7J2872BTTK 28' x 8" Channel Tilt $7,315.00 T7J3072BTTK 30' x 8" Channel Tilt $7,512.00 T7J3272BTTK 32' x 8" Channel Tilt $7,709.00 T7J3472BTTK 34' x 8" Channel Tilt $7,906.00 T7J3672BTTK 36' x 8" Channel Tilt $8,103.00 T7J3872BTTK 38' x 8" Channel Tilt $8,299.00 T7J4072BTTK 40' x 8" Channel Tilt $8,496.00

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue


*** 24' and up has 12" I-beam Neck. *** Triple Axle available on 22' and longer.

*** MAX GVWR 21,000 with Triple 7k Axles and 21k+ Rated Coupler. *** Bumper Pull Tongue Length (5' 2"), Gooseneck Length (8' 7").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 39 of 143 Printed 02/21/2018

8" Channel Tilt (T7) Options


(2) 7,000# (Dexter)

72HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion 73BT (3) 7,000# (Dexter) Electric / Torsion

(3) 7,000# (Dexter) 73HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion

E Rough Oak Floor $19.38/ft

Tail Options: G 2nd Jack (Bumper Pull) $206.25 M Mount Only for Spare Tire $35.00 P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

T Spare Tire and Mount (Bumper Pull) $206.25


Y 1x1 Angle Traction Bars on Rear of Deck $92.50




-TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $92.50





Z Roller on Front of Deck for Winch Cable $160.00


U Deck on the Neck (102" Wide 96" Long) $668.75

Q Front Toolbox (Bumper Pull & Pintle) $198.75

Y2BT (2) 7,000# w/215R17.5 LR-H Singles (Dexter) Electric / Torsion $1,213.00

0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BT * (2) 7,000# (Dexter) Electric / Torsion Included


$1,576.00 $1,173.00

4 Plate for Winch $150.00 6 6" Taller GN Riser $160.00

7 Douglas Fir Lumber $7.19 / ft $3,016.00 9 9,990 G.V.W.R. $0.00


Page 40 of 143 Printed 02/21/2018


(763) 434-2277 HD Equipment Tilt 8" Channel (TK)

T K T 1 6 8 2 B T T K TKT1682BTTK 16' HD Equipment Tilt 8" Channel $8,364.00

TKT1882BTTK 18' HD Equipment Tilt 8" Channel $8,581.00 TKT2082BTTK 20' HD Equipment Tilt 8" Channel $8,799.00 TKT2282BTTK 22' HD Equipment Tilt 8" Channel $9,016.00 TKT2482BTTK 24' HD Equipment Tilt 8" Channel $9,234.00 TKT2682BTTK 26' HD Equipment Tilt 8" Channel $9,451.00 TKT2882BTTK 28' HD Equipment Tilt 8" Channel $9,669.00 TKT3082BTTK 30' HD Equipment Tilt 8" Channel $9,886.00 TKT3282BTTK 32' HD Equipment Tilt 8" Channel $10,104.00 TKT3482BTTK 34' HD Equipment Tilt 8" Channel $10,321.00 TKT3682BTTK 36' HD Equipment Tilt 8" Channel $10,539.00 TKT3882BTTK 38' HD Equipment Tilt 8" Channel $10,756.00 TKT4082BTTK 40' HD Equipment Tilt 8" Channel $10,974.00

Standard Features

Coupler Options: T* HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $35.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,374.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,236.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,236.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,236.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,009.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,141.00 V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $0.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00 X HD 2 5/16" Adj Ch Mnt 3 Bolt 20k w/8 Hole Ch Brckt $35.00


Primer + Red (Texas) (1) Red (r) Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w) Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n) Grey (g) Primer + Grey (Texas) (6)

$308.00

$369.00

$350.00

• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • Dexter Torflex® Torsion Suspension • 4 - 16" White Spoke Wheels • 4 - 235/85R16 14 Ply Radial Trs (4,080 lb) • Stake Pockets & Rubrail • Electric Breakaway Kit w/ Charger • 10" x 72" Treadplate Removable Steel Fenders • Tool Tray In Tongue


$403.00

1 2 3 4 5 6 7 8 9 10 11 Other

Page 41 of 143 Printed 02/21/2018

HD Equipment Tilt 8" Channel (TK) Options


(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Torsion ($400.00)

(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Torsion Included

Tail Options: G 2nd Jack (Bumper Pull) $206.25

T* 16' Tilt Deck Incl. H Power up Power down Tilt $738.75

K Power Up/Down & Gravity Down $910.00 M Mount Only for Spare Tire $35.00

P 11ga(1/8")DP Steel Floor w/4 Flushmount D-Rings & 12"oc

$48.13 / ft

Q Front Toolbox (Bumper Pull & Pintle) $198.75 R 102" Deck Width From Fenders to Front of Deck $27.19 / ft

S ¼" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $89.38 / ft T Spare Tire and Mount (Bumper Pull) $206.25

U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25

X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y 1x1 Angle Traction Bars on Rear of Deck $92.50

Z Roller on Front of Deck for Winch Cable $160.00 -BWFL Blackwood Classic Full Deck $27.19 / ft

-BWOT Blackwood Classic Outer Deck $16.25 / ft -BWPF Blackwood Pro Full Deck $31.56 / ft

-BWPO Blackwood Pro Outer Deck $20.31 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00

-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25

-FR01 Fork Rack $275.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50

-JA06 2 Hydraulic Monster Jacks™ $1,972.50 -RT01 1 Pair Weld-On Strap Ratchets $63.75

-TB02 Bumper Pull Double Deck Toolbox (Upgrade) $336.25 -TB03 Top Riser Toolbox $482.50

E Rough Oak Floor $19.38 / ft

K2BT (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Torsion

$774.00

93BT (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion

B2BT

82BT *

73BT (3) 7,000# (Dexter) Electric / Torsion ($1,132.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75

Y3BT

5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00 7 Douglas Fir Lumber $7.19 / ft

2 20ft Power Up/Down Tilt Deck $861.25

($444.00) 3 22ft Power Up/Down Tilt Deck $1,036.25

4 Plate for Winch $150.00

9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $198.75

(3) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric/Torsion $685.00 1 18 Power Up\Down Tilt Deck $777.50

Page 42 of 143 Printed 02/21/2018


(763) 434-2277 Deckover Tilt (T8)

T 8 J 2 2 7 2 B S T K T8J2272BSTK 22' Deckover Tilt $7,101.00

T8J2472BSTK 24' Deckover Tilt $7,408.00 T8J2672BSTK 26' Deckover Tilt $7,714.00 T8J2872BSTK 28' Deckover Tilt $8,020.00

Standard Features



H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,293.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,064.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,064.00 T HD 2 5/16" Adj.3 Bolt Cplr w/6 hole Chn Brkrt (25k $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Tool Tray & Lockable Toolbox In Tongue • 8" x 10 lb. I-Beam Tongue • 8" x 10 lb. I-Beam Main Frame • 22' Tilt Portion w/ 15 Degree Tilt Pitch

• 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 2" Treated Pine Lumber Deck • 96" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • 12VDC Hydraulic Pump • 2 - 3" x 16" West Craft Hyd. Cylinders • 12' Control Cable • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped with Front Toolbox • GN Equipped with Chain Holder • 5 year Dexter Axle Warranty

28' or more must include Frame Bridge option. 8k axle options must include 102" wide option (R).

*** MAX GVWR 16,500 with 8k Axle Option and 16.5k+ Rated Coupler. *** Bumper Pull Tongue Length (6' 3"), Gooseneck Length (8' 9").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 43 of 143 Printed 02/21/2018

Deckover Tilt (T8) Options


72BT (2) 7,000# (Dexter) Electric / Torsion² $296.00

(2) 7,000# (Dexter) 72HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(2) 7,000# (Dexter) 72HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

1 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $79.38 / ft

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BT Electric / Torsion

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92HSs Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $2,216.00


(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) B2BS Electric / Spring²

(2) 8,000# Oil Bath w/215/75R17.5 LR-H

$1,409.00

K2BS

K2BT

K2HS

Singles(Dexter) Electric / Spring² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Torsion² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$2,583.00

$3,374.00

$4,108.00

Tail Options:

-CP08 Upgrade to 8 Hole Channel Adjustable Coupler $35.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Wood Floor $41.25 -DR01 1 Pair D-Rings $41.25

T* 22’ Tilt Incl. -JA06 2 Hydraulic Monster Jacks ™ $1972.50

-LT10 Light Bar w/4 Lights $345.00

-PUGD Power up/Down & Gravity Down Upgrade $172.50


-SP01 Under Frame Spare Tire and Mount $337.50

-ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75


-TRA1 ½ x ½ Square Traction Bars on Rear of Deck $92.50


Z Roller on Front of Deck for Winch Cable -BWFL Blackwood Classic Full Deck -BWOT Blackwood Classic Outer Deck

$160.00 $33.13 / ft $19.38 / ft

K2HT (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion²

$4,899.00

92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring²

0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BS * (2) 7,000# (Dexter) Electric / Spring Included

92HT

K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft M Mount Only for Spare Tire $35.00 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $52.50 / ft R 102" Deck Width $207.50

S Scissor Lift w/Cylinder $470.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y Spare Tire & Mount (Bumper Pull) G Rated $277.50

E Rough Oak Floor $22.19 / ft G 2nd Jack (Bumper Pull) $206.25 H Under Frame Tie Down Flat $3.13 / ft

$1,575.00 2 Monster Steps on Both Sides $71.25 3 Solar Battery Charger $135.00

$1,871.00 4 Plate for Winch $150.00 $459.00 5 1x1 Angle Traction Bars on Rear of Deck $92.50

6 6" Taller GN Riser $160.00

$755.00 7 Douglas Fir Lumber $8.44 / ft 8 Full Size Divided Toolbox Upgrade (BP Only) $86.25

$1,920.00 9 9,990 G.V.W.R. $0.00

B Frame Bridge $213.75



82BT (2) 8,000# Oil Bath w/235/ Electric / Torsion²


(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) 82HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,335.00

82HT (2) 8,000# Oil Bath w/235/ Elec/Hyd Disc (1,600 PSI

85R16 LR-G Tires (Dexter) $4,126.00 Pump) / Torsion²

Page 44 of 143 Printed 02/21/2018


(763) 434-2277 HD Deckover Tilt (T9)

T 9 R 2 4 7 2 B S T K T9R2472BSTK 24' HD Deckover Tilt $9,591.00

T9R2672BSTK 26' HD Deckover Tilt $9,899.00 T9R2872BSTK 28' HD Deckover Tilt $10,204.00 T9R3072BSTK 30' HD Deckover Tilt $10,510.00 T9R3272BSTK 32' HD Deckover Tilt $10,816.00 T9R3472BSTK 34' HD Deckover Tilt $11,123.00 T9R3672BSTK 36' HD Deckover Tilt $11,429.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $366.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $229.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $229.00 P 3" Pintle Eye - Face-mount (36,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $229.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 15,680 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • 24' Tilt Portion w/ 17 Degree Tilt Pitch • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame

• 2" Treated Pine Lumber Deck • 12" x 14 lb. I-Beam Main Frame, Riser & Neck • 102" Wide Deck • 5" x 10.5" West Craft Hyd. Cylinder w/Scissor Lift • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • 12VDC Hydraulic Pump • 12' Control Cable • Sand Blasted, Acid Washed, Powder Coated • 110V Integrated Trickle Charger • Interstate (TM) Deep Cycle Battery • GN Option Equipped with 2 Jacks • GN Equipped with Front Toolbox • GN Equipped with Chain Holder • 5 year Dexter Axle Warranty

Triple Axle Requires 30' and up. *** MAX GVWR 24,000 with Triple 8k Axles. ***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 45 of 143 Printed 02/21/2018

HD Deckover Tilt (T9) Options


72BT (2) 7,000# (Dexter) Electric / Torsion² $296.00 1 ¼" DP Steel Floor w/ 4 D-Rings & 12"oc $79.38 / ft

(2) 7,000# (Dexter) 72GS Elec/Hyd Drum (1,000 PSI Pump) / Spring

(2) 7,000# (Dexter)

$1,445.00

72HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,575.00 5 1x1 Angle Traction Bars on Rear of Deck $92.50 6 6" Taller GN Riser $160.00

(2) 7000# (Dexter) Surge Disc (Surge Coupler)/ Spring $2,289.00

(2) 7,000# (Dexter) 72SS Surge Hydraulic Drum [Surge Coupler] / Spring²

$1,786.00

73BS (3) 7,000# (Dexter) Electric / Spring $1,024.00


E Rough Oak Floor $22.19 / ft H Under Frame Tie Down Flat $3.13 / ft K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft



$459.00

P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $47.81 / ft U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25

92BT Electric / Torsion $755.00 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²


$1,920.00 Z Roller on Front of Deck for Winch Cable $160.00


(3) 7,000# w/235/85R16 LR-G Tires (Dexter) 93BS Electric / Spring

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter)

$1,711.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00


B2BS Electric / Spring² $1,409.00 -DR01 1 Pair D-Rings $41.25

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) B2BT Electric / Torsion²

(2) 8,000# Oil Bath w/215/75R17.5 LR-H

$2,200.00


K2BS Singles(Dexter) Electric / Spring²

$2,583.00

(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² $2,600.00

-S501 1 Side-mount Toolbox 72"x14" $653.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00 -TB03 Top Riser Toolbox $400.00

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²


$3,335.00 -TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $92.50

Notes: 82HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $4,126.00 ² Special Order Option: Requires additional confirmation lead-time.

83BS (3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring

$3,736.00

Tail Options:

T* 24' Tilt Incl.



72HT (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,871.00

82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) $1,809.00 Electric / Spring²

3 4

Solar Battery Charger Plate for Winch

$135.00 $150.00

8 9 B

Full Size Divided Toolbox Upgrade (BP Only) 9,990 G.V.W.R. Frame Bridge

$86.25 $0.00

$213.75 C 12"oc Crossmembers $198.75

-BWFL Blackwood Classic Full Deck -BWOT Blackwood Classic Outer Deck

$33.13 / ft $19.38 / ft

-MD01 Mud Flaps Single Wheel Deckover -RT01 1 Pair Weld-On Strap Ratchets

$55.00 $63.75

73BT (3) 7,000# (Dexter) Electric / Torsion $1,468.00


72KS

73HT

82BT

Page 46 of 143 Printed 02/21/2018


(763) 434-2277 Tandem Dual Tilt (TD)

T D R 2 4 A 2 B T S K TDR24A2BTSK 24' Tandem Dual Tilt $15,430.00

TDR26A2BTSK 26' Tandem Dual Tilt $15,663.00 TDR28A2BTSK 28' Tandem Dual Tilt $15,895.00 TDR30A2BTSK 30' Tandem Dual Tilt $16,128.00 TDR32A2BTSK 32' Tandem Dual Tilt $16,360.00 TDR34A2BTSK 34' Tandem Dual Tilt $16,593.00 TDR36A2BTSK 36' Tandem Dual Tilt $16,825.00 TDR38A2BTSK 38' Tandem Dual Tilt $17,058.00 TDR40A2BTSK 40' Tandem Dual Tilt $17,290.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) w/ Toolbox Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $366.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $229.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $229.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $229.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Dropleg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Monster Steps on Both Sides • Lockable Front Toolbox w/Chain Holder • Self-rising Bumper • 24' Tilt Portion w/ 15 Degree Tilt Pitch

• 12VDC Hydraulic Pump • Scissor Lift • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • 8" x 15 lb. I-lb. Deck Frame • 3" Channel Crossmembers 16" on Center • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • Frame Bridging on 30' and Longer • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 110V Integrated Trickle Charger • Interstate (TM) Deep Cycle Battery • 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift • 10 year Dexter Torflex Axle Warranty

*** MAX GVWR 28,000 with 12k Axles and 28k+ Rated Coupler. ***

1 2 3 4 5 6 7 8 9 10 11 Other

Page 47 of 143 Printed 02/21/2018

Tandem Dual Tilt (TD) Options

Axle Options: (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) S2BS Electric / Spring²

(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter)

$970.00

Other Options:

S2BT Electric / Torsion² $2,313.00

S2HS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $3,213.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring²

4 Plate for Winch $150.00 5 1x1 Angle Traction Bars on Rear of Deck $92.50

7 Douglas Fir Lumber $8.44 / ft 9 Under Frame Tie Down Flat $3.13 / ft B 22 lb. I-Beam Main Frame, Riser & Neck $19.06 / ft C 12"oc Crossmembers $198.75 E Rough Oak Floor $22.19 / ft K 4" Ratchets every 4ft w/ Slide Track $28.75 / ft M 6" Axle Spread (Longer Equalizer) $198.75 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $50.94 / ft R Frame Bridging $215.00 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Z Roller on Front of Deck for Winch Cable $160.00 -BWFL Blackwood Classic Full Deck $33.13 / ft -BWOT Blackwood Classic Outer Deck $19.38 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) $2,481.00 D2BS Electric / Spring²

(2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) $4,375.00 D2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring Tail Options:


-DR01 1 Pair D-Rings $41.25 -JA01 HD 25k Jost 2x Jacks $592.50


-RC01 1 - 38" Center Deck Roller $267.50

-RF01 2 - 17" Outer Deck Rollers - 1 - 38" Cntr Roller $680.00 S* 24' Tilt Deck Incl. . -RP01 2 - 17" Outer Deck Rollers $412.50


-S201 1 Side-mount Toolbox 45"x17½" $397.50 -S401 1 Side-mount Toolbox 72"x17½" $653.75

-SLCH Solar Battery Charger $135.00 -TB03 Top Riser Toolbox $400.00

-TRA1 1/2 x 1/2 Square Traction Bars on Rear of Deck $107.50



0 1


$28.75 $1,151.25

(2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) S2KT Surge Disc [Surge Coupler] / Torsion² $6,529.00 A2BA (2) 10,000# Axles (Dexter) Electric / Air Ride² $2,611.00 A2BS (2) 10,000# Axles (Dexter) Electric / Spring $0.00 A2BT * (2) 10,000# Axles (Dexter) Electric / Torsion Included

A2GT (2) 10,000# Axles (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Torsion² $3,579.00

A2HA (2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $6,194.00

A2HS (2) 10,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $901.00

(2) 10,000# w/235/85R16 T2BS Electric / Spring²

LR-G Dual T&W(Dexter) $825.00

(2) 10,000# w/235/85R16 T2BT Electric / Torsion²

LR-G Dual T&W(Dexter) $825.00


(2) 12,000# Axles (Dexter) C2HA Elec/Hyd Disc (1,600 PSI Pump) / Air Ride² $7,388.00

C2HS (2) 12,000# Axles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,550.00

Page 48 of 143 Printed 02/21/2018


(763) 434-2277 4" Channel Carhauler (C4)

C 4 2 1 4 3 2 C S S K C421432CSSK 14' x 4" Channel Carhauler $2,544.00

C421632CSSK 16' x 4" Channel Carhauler $2,588.00 C421832CSSK 18' x 4" Channel Carhauler $2,633.00 C422032CSSK 20' x 4" Channel Carhauler $2,677.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $34.00 D BP 2" Adjustable $110.00

Powder Coat Color Options: Black (k) * Incl. Desert Tan (t) Grey (g) Red (r)

J BP 2 5/16" Adjustable $110.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $34.00 P 3" Pintle Eye - Channel-Mount $110.00


Tractor Green (j) Tractor Orange (n) White (w)

$65.00

• 7,000 G.V.W.R. • 7,000 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-Eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets

• 9" x 33" Treadplate Removable Alum Fenders • 4" Channel Frame & Tongue • 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers • 2" Treated Canadian Spruce Pine Fir Deck • 83" Wide Deck • Flushmount 6” Oval Lifetime LED Tail Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** MAX GVWR 7,000 *** Bumper Pull Tongue Length (3' 9").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 49 of 143 Printed 02/21/2018

4" Channel Carhauler (C4) Options


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 4 Plate for Winch $150.00 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 7 Upgrade to 7k Jack $92.50

F Steel Diamond Plate Fenders $0.00 Tail Options: J LED Light Upgrade Clearance/Marker $46.25 S* Straight Deck w/ 5' Slide-in Ramps Incl. Q Rubrail $5.31 / ft 2 2' Dovetail w/ 5' Slide-in Ramps $49.00 T Mount Only for Spare Tire $35.00 A 2' Dovetail w/ 2 Fold-up Ramps $99.00 U Rear Trailer Support Jacks $110.00 C Straight Deck w/ 2 Fold-up Ramps $49.00 V Spare Tire and Mount $150.00 G Straight Deck w/ 4' Fold-up Gate $208.00 X 16"oc Crossmembers $197.50 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $326.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $375.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25


Page 50 of 143 Printed 02/21/2018


(763) 434-2277 5" Channel Carhauler (C5)

C 5 2 1 4 3 2 C S S K C521032CSSK 10' x 5" Channel Carhauler $2,774.00

C521232CSSK 12' x 5" Channel Carhauler $2,774.00 C521432CSSK 14' x 5" Channel Carhauler $2,774.00 C521632CSSK 16' x 5" Channel Carhauler $2,818.00 C521832CSSK 18' x 5" Channel Carhauler $2,863.00 C522032CSSK 20' x 5" Channel Carhauler $2,907.00 C522232CSSK 22' x 5" Channel Carhauler $2,951.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $34.00 D BP 2" Adjustable $110.00 J BP 2 5/16" Adjustable (14,000 lb.) $110.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Desert Tan (t) Equipment Yellow (Texas & Ohio) (y) Grey (g)

M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $34.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $110.00 R GN 2 5/16”


$65.00

Primer + Black (Texas) (0) $143.00 * The trailer G.V.W.R. cannot exceed the coupler rating. Primer + Red (Texas) (1) $308.00

Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2)

$350.00

Primer + White (Texas) (3)

Primer + Grey (Texas) (6) $403.00

$369.00 Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5)

• 7,000 lb. G.V.W.R. • 3,500 lb. x 2 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 2- Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 33" Treadplate Removable Alum Fenders

• 5' Channel Ramps w/ Holder • 5" Channel Frame & Tongue • 3" Channel Crossmembers 24" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck (Except with Drop Axles) • DOT Approved Flushmount Lifetime LED Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

Trailer will have 80" Frame with 3500 # Torsion Axle. Bumper Pull Tongue Length (3' 5").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 51 of 143 Printed 02/21/2018

5" Channel Carhauler (C5) Options


32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $294.00 0 Cold Weather Wiring Harness (Paris Only) $28.75 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 2 Upgrade to 225/75 R15 on 3.5k Axles $92.50 32CT (2) 3,500# (Dexter) One Electric / Torsion² $294.00 3 10k Jack (Bumper Pull) $137.50 32DS (2) 3,500# (Dexter) Idler / Spring ($179.00) 4 Plate for Winch $150.00 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $476.00 7 Upgrade to 7k Jack $92.50 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 8 2 Stake Pockets In Front of Trailer $12.50 32ET (2) 3,500# (Dexter) Electric / Torsion² $476.00 9 4ft Expanded Metal Sides (Removable) $49.69 / ft

(2) 3,500# (Dexter) A Side Mount ATV Ramps (12ft or Longer) $98.75 32MS Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag /

Spring² $819.00 B 12"oc Crossmembers $397.50

S* Straight Deck w/ 5' Slide-in Ramps Incl. H Landscape Toolbox (Must Have Siderails) $282.50 2 2' Dovetail w/ 5' Slide-in Ramps $49.00 K Expanded Metal Chain Tray $77.50 4 4' Dovetail w/ 5' Slide-in Ramps $49.00 M Open Pit Steel Floor w/4 Flushmount D-Rings $335.00 A 2' Dovetail w/ 2 Fold-up Ramps $99.00 N Diamond Plate Running Boards (Paris ONLY) $9.69 / ft B Straight Deck w/ 4' Split Heavy Duty Gate $409.00 P 2" Pipetop Siderails (Removable) $23.75 / ft C Straight Deck w/ 2 Fold-up Ramps $49.00 Q Rubrail $5.31 / ft D 4' Dovetail w/ 2 Fold-up Ramps $99.00 R U8 Side Rail (Removable) $15.63 / ft E F

2' Dovetail w/ 3 Fold-up Ramps Straight Deck w/ Fold In Gate

$196.00 $278.00

S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings & 16"oc

$30.31 / ft

G Straight Deck w/ 4' Fold-up Gate $208.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $326.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $375.00 K 2' Dovetail w/ Split Heavy Duty Gate $458.00 M 4' Dovetail w/ Split Heavy Duty Gate $458.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $155.00

T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 X 16"oc Crossmembers $197.50 Z 22" Solid Metal Sides w/ 2" pipe-top (Removable) $33.44 / ft -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25

-TB01 Front Toolbox (with 7k Jack) $287.50



P 4' Dovetail w/ 5' Rear Slide-in Ramps $225.00 R Straight Deck w/ Rear Slide-in Ramps $105.00

(2) 3,500# (Dexter) $959.00 32 SS Surge Hydraulic Drum [Surge Coupler] / Spring² Tail Options:

B 12” o.c. Crossmembers

$397.50

C 4ft Solid Metal Sides (Removable) $49.69/ft E Rough Oak Floor (Paris and Ohio Only) $16.25/ft F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $178.75

Page 52 of 143 Printed 02/21/2018


(763) 434-2277 5" Channel Equipment (CE)

C E J 1 6 5 2 E S S K CEJ1252ESSK 12' x 5" Channel Equipment $3,473.00

CEJ1452ESSK 14' x 5" Channel Equipment $3,473.00 CEJ1652ESSK 16' x 5" Channel Equipment $3,473.00 CEJ1852ESSK 18' x 5" Channel Equipment $3,517.00 CEJ2052ESSK 20' x 5" Channel Equipment $3,561.00 CEJ2252ESSK 22' x 5" Channel Equipment $3,606.00

Standard Features

Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. A BP 2 5/16" A-Frame $0.00 B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $58.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Desert Tan (t) Equipment Yellow (y) Grey (g)

V BP 2 5/16" Adj. (14,000 lb.) w/8 Hole Chan Bracket $69.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $69.00 X HD 2 5/16" Adj Ch Mnt 3 Bolt 20k w/8 Hole Ch Brckt $90.00


$65.00

* The trailer G.V.W.R. cannot exceed the coupler rating. Primer + Black (Texas) (0) $143.00 Primer + Red (Texas) (1) $308.00 Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3)

$350.00



• 9,990 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • BP 2 5/16" Adjustable (14,000 lb.) • Safety Chains • 1 - Drop Leg Jack (8,000 lb.) • 2 - Dexter E- Z lube Brake Axle (5,200 lb.) • 6 Leaf Slipper Spring Suspension • 4 -15" White Spoke Wheels • 4 - 225/75R15 Radial Tires • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders

• 5' Channel Ramps w/ Holder • Dual Bulldog Rear Support Jacks • 5" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck (Except with Drop or Torsion Axles) • DOT Approved Flushmount Lifetime LED Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • • 5 year Dexter Axle Warranty

Trailer will have 80" Frame with Torsion or Drop Axles Bumper Pull . Tongue Length (3' 5").

***8k Drop Leg Jack Is Welded Onto Texas/Ohio Units*** ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on

foldup ramps and HD gate options***

1 2 3 4 5 6 7 8 9 10 11 Other

Page 53 of 143 Printed 02/21/2018

5" Channel Equipment (CE) Options


52ES * (2) 5,200# (Dexter) Electric / Spring Included

(2) 5,200# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $1,680.00

(2) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring $906.00

Tail Options:

S* Straight deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $49.00 4 4' Dovetail w/ 5' Slide-in Ramps $49.00 A 2' Dovetail w/ 2 Fold-up Ramps $99.00 B Straight Deck w/ 4' Split Heavy Duty Gate $409.00 C Straight Deck w/ 2 Fold-up Ramps $49.00 D 4' Dovetail w/ 2 Fold-up Ramps $99.00 E 2' Dovetail w/ 3 Fold-up Ramps $196.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $326.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $375.00 K 2' Dovetail w/ Split Heavy Duty Gate $458.00 L 4' Dovetail w/ 4' Heavy Duty Gate $375.00 M 4' Dovetail w/ Split Heavy Duty Gate $458.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $155.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $225.00 R Straight Deck w/ Rear Slide-in Ramps $105.00 U 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $150.00 V 2' Dovetail w/ 31x66 HD Fold-up Ramps $595.00 W Straight Deck w/ 5' Dbl Hinge Fold-up Ramps $101.00

52ST (2) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Torsion $1,200.00

52SD (2) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Drop Axle

$1,078.00

52ET (2) 5,200# (Dexter) Electric / Torsion $295.00

52ED (2) 5,200# (Dexter) Electric / Drop Axle $173.00

52HS

52SS

0 Cold Weather Wiring Harness (Texas & Ohio Only) $28.75 3 10k Jack (Bumper Pull) $137.50 4 Plate for Winch $150.00 5 Upgrade to 235/80 R16 on 52k Axles $127.50 8 2 Stake Pockets In Front of Trailer $12.50 9 4ft Expanded Metal Sides (Removable) $49.69 / ft A Side Mount ATV Ramps (12ft or Longer)(Must Incl.

Option R) $98.75

B 12"oc Crossmembers $198.75 C 4ft Solid Metal Sides (Removable) $49.69 / ft E Rough Oak Floor (Texas and Ohio Only) $16.25 / ft G 4ft Side Gate (14ft or longer) $178.75 H Landscape Toolbox (Must Have Siderails) $282.50 J Receiver Hitch $78.75 K Expanded Metal Chain Tray $77.50 L U8 Side Rail w/Expanded Metal (Removable) $30.31 / ft N Diamond Plate Running Boards (Texas Only) $9.69 / ft P 2" Pipetop Siderails (Removable) $23.75 / ft Q Rubrail $5.31 / ft R U8 Side Rail (Removable) $15.63 / ft S 11ga(1/8") DP Steel Floor w/ 4 Flushmount D-Rings $48.13 / ft T Mount Only for Spare Tire $35.00 V Spare Tire and Mount $135.00 Z 22" Solid Metal Sides w/ 2" pipe-top (Removable) $33.44 / ft -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -BWPF Blackwood Pro Full Deck $31.56 / ft -BWPO Blackwood Pro Outer Deck $20.31 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -FE05 Weld on Fenders $70.00 -LB01 Douglas Fir Lumber (Texas & Ohio Only) $8.44 / ft -TB01 Front Toolbox $196.25

Page 54 of 143 Printed 02/21/2018


(763) 434-2277 6" Channel Equipment (CC)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

CCJ1272BSSK 12' x 6" Channel Equipment $4,285.00




Coupler Options: J* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00


L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,293.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,064.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,064.00 T HD 2 5/16" Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k) $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 6" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 8" I-beam on Goosenecks *** *** MAX GVWR Rating 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler. *** Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

Bumper Pull Tongue Length (4' 7"), Gooseneck Length (8' 4"). ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on






C C J 1 6 7 2 B S S K

Page 55 of 143 Printed 02/21/2018

Fenders Not Removable

92BS 92BT

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion

$459.00

$755.00

6" Channel Equipment (CC) Options

Axle Options:

Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $584.00 A 2' Dovetail w/ 5' Slide-in Ramps $58.00 B 2' Dovetail w/ 5' Fold-up Ramps $115.00

C Straight deck w/ 5' Fold-up Ramps $58.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $605.00 E 4' Dovetail w/ 5' Slide-in Ramps $58.00 F 4' Dovetail w/ 5' Fold-up Ramps $115.00

(2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring² $1,445.00


H Straight Deck w/ 4' Heavy Duty Fold-up Gate $326.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $384.00 K 2' Dovetail w/ Split Heavy Duty Gate $466.00

(2) 7,000# (Dexter) 72SS Surge Hydraulic Drum [Surge Coupler] / Spring²

(3) 7,000# (Dexter) Electric / Spring

$1,080.00

73BS Fenders Not Removable $1,024.00

73BT (3) 7,000# (Dexter) Electric / Torsion Fenders Not Removable (3) 7,000# (Dexter)

$1,468.00

W 4' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $168.00 X Straight deck w/ 3 5' Fold-up Ramps $155.00

73HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,386.00 Other Options:

93BT

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion Fenders Not Removable

$2,156.00

C 12"oc Crossmembers $198.75 E Rough Oak Floor $16.25 / ft H Receiver Hitch $78.75 M 2 3/8" Pipetop on Siderails (Removable) $23.75 / ft N Diamond Plate Running Boards $9.69 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring² $1,409.00

Q Front Toolbox (Bumper Pull) $198.75 T Spare Tire and Mount (Bumper Pull) $206.25

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) B2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

(2) 8,000# Oil Bath w/215/75R17.5 LR-H

$2,935.00

X Bulldog 2-speed Jacks (12,000 lb.) $197.50 K2BT Singles(Dexter)

Electric / Torsion² $3,374.00 Z 3" X 3" Square Tubing Top Rail (Removable) $23.75 / ft

-BWFL Blackwood Classic Full Deck $27.19 / ft 82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)

Electric / Spring² (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)


82BT Electric / Torsion² $2,600.00


83BS (3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring² $3,736.00 Fenders Not Removable

2 4

92GS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring² (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$1,968.00

92HS $1,920.00

6 7 B

2nd Jack (Bumper Pull) Plate for Winch 6" Taller GN Riser Douglas Fir Lumber Rubrail

$206.25 $150.00 $160.00 $7.19 / ft $5.31 / ft

0 Cold Weather Wiring Harness (7-Way RV) $28.75

G 2' Dovetail w/ 3 5' Fold-up Ramps $213.00

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,575.00

93BS (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring Fenders Not Removable

$1,711.00

93HS (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable

$3,904.00

N P R

2' Dovetail w/ 5' Rear Slide-in Ramps 4' Dovetail w/ 5' Rear Slide-in Ramps Straight Deck w/ Rear Slide-in Ramps

$164.00 $233.00 $105.00

U V

Deck on the Neck (102" Wide 96" Long) Rear Trailer Support Jacks

$668.75 $110.00

M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $168.00

T Straight deck w/ 31x66 HD Fold-up Ramps $546.00

72GS

72HT

B2BS

52BS (2) 5,200# (Dexter) Electric / Spring ($70.00) 52BT (2) 5,200# (Dexter) Electric / Torsion $223.00 52CS (2) 5,200# (Dexter) One Electric / Spring ($177.00)

52GS (2) 5,200# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $723.00

72BD (2) 7,000# (Dexter) Electric / Drop Axle² $186.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $296.00

-DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -FR01 Fork Rack $275.00 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -RT01 1 Pair Weld-On Strap Ratchets $63.75 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $330.00 -TB03 Top Riser Toolbox $482.50

Page 56 of 143 Printed 02/21/2018

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 8" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 83" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 24' and up has 12" I-beam Neck. *** *** MAX GVWR Rating 24,000 with Triple 8k Axle Option and 24k+ Rated Coupler. *** Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

Bumper Pull Tongue Length (4' 9"), Gooseneck Length ( 8' 4"). ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on



(763) 434-2277 8" Channel Equipment (C8)

C 8 A 2 0 7 2 B S S K C8A1672BSSK 16' x 8" Channel Equipment $5,000.00

C8A1872BSSK 18' x 8" Channel Equipment $4,995.00











C8A4072BSSK 40' x 8" Channel Equipment $7,040.00 Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00


P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,293.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,064.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,064.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

1 2 3 4 5 6 7 8 9 10 11 Other

Page 57 of 143 Printed 02/21/2018

8" Channel Equipment (C8) Options

Axle Options:

72BD (2) 7,000# (Dexter) Electric / Drop Axle² $186.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion $296.00


Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. 5 3.5' Dovetail w/2 Monster Ramps $584.00 A 2' Dovetail w/ 5' Slide-in Ramps $58.00 B 2' Dovetail w/ 5' Fold-up Ramps $115.00 C Straight deck w/ 5' Fold-up Ramps $58.00


(2) 7,000# (Dexter)

$1,575.00


(3) 7,000# (Dexter) Electric / Spring Fenders Not Removable $1,024.00

K 2' Dovetaill w/ Split Heavy Duty Gate $466.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $168.00 N 2' Dovetail w/ 5' with Rear Slide-in Ramps $164.00 P 4' Dovetail w/ 5' with Rear Slide-in Ramps $233.00 T Straight deck w/ 5' Rear Slide-in Ramps $105.00

Other Options:

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hd Drum (1,000 PSI Pump) / Spring (2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²


$1,968.00

$1,920.00

93BS

93BT

93HS

B2BS

82BS

82BT

82HS

83BS

Electric / Spring² Fenders Not Removable (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² Fenders Not Removable (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² Fenders Not Removable (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring² (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring² (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (3) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring² Fenders Not Removable

$1,711.00

$2,156.00

$3,904.00

$1,409.00

$1,809.00

$2,600.00

$3,335.00

$3,736.00






-JA06 2 Hydraulic Monster Jacks™ $1,972.50

73BD (3) 7,000# (Dexter) Electric / Drop Axle² Fenders Not Removable $1,304.00

73BT (3) 7,000# (Dexter) Electric / Torsion Fenders Not Removable $1,468.00

D E

2' Dovetail w/31x66 HD Fold-up Ramps 4' Dovetail w/ 5' Slide-in Ramps

$605.00 $58.00

F G

4' Dovetail w/ 5' Fold-up Ramps 2' Dovetail w/ 3 5' Fold-up Ramps

$115.00 $213.00


72GS

73BS

0 Cold Weather Wiring Harness (7-way RV) $28.75 2 2nd Jack (Bumper Pull) $206.25 4 Plate for Winch $150.00 6 6" Taller GN Riser $160.00 7 Douglas Fir Lumber $7.19 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc $89.38 / ft 9 9,990 G.V.W.R. $0.00 B Rubrail $5.31 / ft C 12"oc Crossmembers $198.75 E Rough Oak Floor $16.25 / ft H Receiver Hitch $78.75 M 2 3/8" Pipetop on Siderails (Removable) $23.75 / ft N Diamond Plate Running Boards $9.69 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

Q Front Toolbox (Bumper Pull) $198.75 R 102" Deck Width $952.50 S Mount Only for Spare Tire $35.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 V Rear Trailer Support Jacks $110.00 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Z 3" X 3" Square Tubing Top Rail (Removable) $23.75 / ft -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft

73GS (3) 7000# (Dexter) Elec/Hyd Drum (1,0000 PSI Pump) / Spring $3,191.00

(3) 7,000# (Dexter) 73HT Elec/Hyd Disc (1,600 PSI Pump) / Torsion $3,830.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $459.00 92BS Electric / Spring²

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $755.00 92BT Electric / Torsion²

92GS

Page 58 of 143 Printed 02/21/2018


(763) 434-2277 8" Pro-Beam Equipment (H4)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

H4T1882BSSK 18' x 8" Pro-Beam Equipment $6,508.00




Coupler Options: T* HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $35.00 C Rigid Mount Pintle Eye- Face-mount $91.00


E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,374.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,236.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,236.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,236.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,009.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,009.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/85R16 14 Ply Radial Trs (4,080 lb) • Rubrail w/Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 72" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder

• Dual Bulldog Rear Support Jacks • 8" x 10 lb. I-Beam Main Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 82" Wide Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Tool Tray In Tongue • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty





H 4 T 2 0 8 2 B S S K

Page 59 of 143 Printed 02/21/2018

8" Pro-Beam Equipment (H4) Options


(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring Included

Tail Options:

1 2' Dovetail w/ 25x66HD Fold-up Ramps $605.00

D 2' Dovetail w/ 31x66 HD Fold-up Ramps $605.00

-TBTL Locking Lid Over Tongue $201.25 S* Straight Deck w/ 5' Rear Slide-in Ramps Incl.

K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring

$775.00

82BS *

0 Cold Weather Wiring Harness (7-Way RV) $28.75 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $48.13 / ft Q Front Toolbox (Bumper Pull) $198.75 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $345.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75 -ST06 Spare Tire & Mount (Bumper Pull) G Rated $277.50

Page 60 of 143 Printed 02/21/2018


(763) 434-2277 10" Pro-Beam Equipment (H5)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

H5P18S2BTSK 18' x 10" Pro-Beam Equipment $8,380.00




Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,374.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,236.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,236.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,236.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,009.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,009.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 22,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 4 - 17.5" Grey Wheels • 235/75/R17.5 LR-J 8-hole SINGLE • Rubrail w/ Stake Pockets • Electric Breakaway Kit w/ Charger • 9" x 81" Treadplate Removable Steel Fenders • 5' Channel Ramps w/ Holder






H 5 P 2 0 S 2 B T S K


Page 61 of 143 Printed 02/21/2018

10" Pro-Beam Equipment (H5) Options


Tail Options:

S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. 1 2' Dovetail w/ 25x66HD Fold-up Ramps $605.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $605.00

0 Q

Cold Weather Wiring Harness (7-Way RV) Front Toolbox (Bumper Pull)

$28.75 $198.75

S2BT * (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Included Electric / Torsion

-FE06 1/4" DP HD Weld on Fenders Tandem Axle $345.00

Page 62 of 143 Printed 02/21/2018


(763) 434-2277 8" Pro-Beam Super-Wide Equip (H6)

H 6 T 2 0 8 2 B S S K H6T2082BSSK 20' x 8" Pro-Beam Super-Wide Equip $6,898.00

H6T2282BSSK 22' x 8" Pro-Beam Super-Wide Equip $7,093.00 H6T2482BSSK 24' x 8" Pro-Beam Super-Wide Equip $7,288.00 H6T2682BSSK 26' x 8" Pro-Beam Super-Wide Equip $7,483.00 H6T2882BSSK 28' x 8" Pro-Beam Super-Wide Equip $7,678.00 H6T3082BSSK 30' x 8" Pro-Beam Super-Wide Equip $7,873.00

Standard Features

Coupler Options: T* HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $35.00 C Rigid Mount Pintle Eye- Face-mount (25,000) $91.00


E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,374.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,236.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,236.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,236.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,009.00 W 3" Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch Brckt $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 16,000 lb. G.V.W.R. • 8,000 lb. x 2 G.A.W.R. • HD 2 5/16" Adjustable 3 Bolt Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (8,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/85R16 14 Ply Radial Trs (4,080 lb) • Rubrail w/Stake Pockets • Electric Breakaway Kit w/ Charger • HD Drive Over 1/4" Diamond Plate Fenders • 5' Channel Ramps w/ Holder


1 2 3 4 5 6 7 8 9 10 11 Other

Page 63 of 143 Printed 02/21/2018

(2) 8,000# Oil Bath w/215/75R17.5 LR-H 0 Cold Weather Wiring Harness (7-Way RV) $28.75

8" Pro-Beam Super-Wide Equip (H6) Options


K2BS Singles(Dexter) $775.00 Electric / Spring

82BS * (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring Included

2 2nd Jack (Bumper Pull) $206.25 4 Plate for Winch $150.00 5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00

Tail Options: 7 Douglas Fir Lumber $7.19 / ft S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12" $89.38 / ft 1 2' Dovetail w/ 25x66HD Fold-up Ramps $605.00 C 12"oc Crossmembers $198.75 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $605.00 E Rough Oak Floor $16.25 / ft

H Receiver Hitch $78.75 P 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 12"oc $48.13 / ft Q Front Toolbox (Bumper Pull) $198.75 S Mount Only for Spare Tire $35.00 U Deck on the Neck (102" Wide 96" Long) $668.75 V Rear Trailer Support Jacks $110.00 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 -BW02 Add BlackWood Classic to Dovetail $301.25 -BW03 Add BlackWood Pro to Dovetail $326.25 -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -BWPF Blackwood Pro Full Deck $31.56 / ft -BWPO Blackwood Pro Outer Deck $20.31 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $35.00 -CWB1 Upgrade to Black Spoke Wheels $67.50 -CWS1 Upgrade to Silver Mod Wheels $67.50 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $1,002.50 -DP01 Add 11ga Diamond Plate to Top of Slide in Ramps $167.50 -DR01 1 Pair D-Rings $41.25 -DS05 3/16" DP Steel Floor w/4 Flushmount D-Rings &

12"oc $57.81 / ft

-EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -FE05 Weld on Fenders $70.00 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $345.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $53.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $312.50 -LT05 Add LED Reverse Lights $150.00 -NF01 No Flooring - $3.75 / ft -PS00 No Pin Striping $0.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75 -ST06 Spare Tire & Mount (Bumper Pull) G Rated $277.50 -TB03 Top Riser Toolbox $482.50 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $281.25 -TB05 Winch Plate Toolbox (Bumper Pull) $468.75 -TBTL Locking Lid Over Tongue $201.25 -WN12 SuperWinch Talon 12.5 w/Plate & Battery $1,588.75 -WN18 SuperWinch Talon 18k w/HD Plate & Battery $2,001.25 -WN95 SuperWinch TS9500 w/Plate & Battery $1,063.75

Page 64 of 143 Printed 02/21/2018


(763) 434-2277 10" Pro-Beam Super-Wide Equip (H7)

H 7 P 2 0 S 2 B T S K H7P20S2BTSK 20' x 10" Pro-Beam Super-Wide Equip $8,770.00

H7P22S2BTSK 22' x 10" Pro-Beam Super-Wide Equip $8,991.00 H7P24S2BTSK 24' x 10" Pro-Beam Super-Wide Equip $9,211.00 H7P26S2BTSK 26' x 10" Pro-Beam Super-Wide Equip $9,433.00 H7P28S2BTSK 28' x 10" Pro-Beam Super-Wide Equip $9,654.00 H7P30S2BTSK 30' x 10" Pro-Beam Super-Wide Equip $9,875.00 H7P32S2BTSK 32' x 10" Pro-Beam Super-Wide Equip $10,096.00

Standard Features

Coupler Options: P* 3" Pintle Eye - Face-mount (36,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,374.00


H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,236.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,236.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,236.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,009.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,009.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 22,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • 3" Pintle Eye Face Mount Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter Oil Bath Axles (10,000 lb.) • Torsion Suspension • 4 - 17.5" Grey Wheels • 235/75/R17.5 LR-J 8-hole SINGLE • Rubrail w/ Stake Pockets • Electric Breakaway Kit w/ Charger • HD Drive Over 1/4" Diamond Plate Fenders • 5' Channel Ramps w/ Holder


1 2 3 4 5 6 7 8 9 10 11 Other

Page 65 of 143 Printed 02/21/2018

10" Pro-Beam Super-Wide Equip (H7) Options


Tail Options:

S* Straight Deck w/ 5' Rear Slide-in Ramps Incl. 1 2' Dovetail w/ 25x66HD Fold-up Ramps $605.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $605.00

(2) 10,000# w/235/75R17.5" LR-J Single T&W S2BT * (Dexter)

Electric / Torsion Included

0 Cold Weather Wiring Harness (7-Way RV) $28.75 2 2nd Jack (Bumper Pull) $206.25 4 Plate for Winch $150.00 5 Solar Battery Charger $265.00 6 6" Taller GN Riser $160.00 7 Douglas Fir Lumber $7.19 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12" $89.38 / ft C 12"oc Crossmembers $198.75 E Rough Oak Floor $16.25 / ft H Receiver Hitch $78.75 P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

Q Front Toolbox (Bumper Pull) $198.75 U Deck on the Neck (102" Wide 96" Long) $668.75 V Rear Trailer Support Jacks $110.00 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 -BW02 Add BlackWood Classic to Dovetail $301.25 -BW03 Add BlackWood Pro to Dovetail $326.25 -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -BWPF Blackwood Pro Full Deck $31.56 / ft -BWPO Blackwood Pro Outer Deck $20.31 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $1,002.50 -DP01 Add 11ga Diamond Plate to Top of Slide in Ramps $167.50 -DR01 1 Pair D-Rings $41.25 -DS05 3/16" DP Steel Floor w/4 Flushmount D-Rings & 12"oc $57.81 / ft -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -FE05 Weld on Fenders $70.00 -FE06 1/4" DP HD Weld on Fenders Tandem Axle $345.00 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $53.75 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks $312.50 -JABG Upgrade to BULLDOG 10k Jacks (Gooseneck Only) $106.25 -LT05 Add LED Reverse Lights $150.00 -LT10 Light Bar w/4 Lights $345.00 -NF01 No Flooring - $3.75 / ft -PS00 No Pin Striping $0.00 -RM30 No Ramps No Ramp Pockets -$93.75 -RR03 3 Inch Rubrail $13.75 / ft -SL04 4 Side Marker 3/4" Bullet Lights, 2 Per Side $137.50 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $330.00 -TB03 Top Riser Toolbox $482.50 -TB04 Full Size Divided Toolbox Upgrade (BP Only) $281.25 -TBTL Locking Lid Over Tongue $201.25 -WN12 SuperWinch Talon 12.5 w/Plate & Battery $1,588.75 -WN18 SuperWinch Talon 18k w/HD Plate & Battery $2,001.25 -WN95 SuperWinch TS9500 w/Plate & Battery $1,063.75 -WP04 HD GN Winch Plate (Rec. for 18k Winches) $191.25 -WP05 Tongue Mounted Winch Plate $217.50

Page 66 of 143 Printed 02/21/2018


(763) 434-2277 Angle Pipetop Trailer (P8)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

P8J1472BSSK 14' Angle Pipetop Trailer $4,286.00






H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 Q GN 2 5/16" Square (30,000 lb.) w/ Toolbox $1,293.00 R GN 2 5/16" Round (25,000 lb.) w/ Toolbox $1,064.00 S GN 2 5/16" Square (25,000 lb.) w/ Toolbox $1,064.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Dual Bulldog Rear Support Jacks • Electric Breakaway Kit w/ Charger • 5' Channel Ramps w/ Holder

• 2x3 Angle Upright • 2 7/8 Pipe Top Rail • 5" Channel Tongue & 3" x 5" Angle Frame • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

Trailer will have 80" Frame with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles. *** MAX GVWR 16,000 with 8k axles and 16k+ Rated Coupler. ***

Bumper Pull Tongue Length (3' 9"), Gooseneck Length (8' 5"). ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on






P 8 J 1 6 7 2 B S S K

Page 67 of 143 Printed 02/21/2018

72SS (2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $1,080.00

Angle Pipetop Trailer (P8) Options


52BS (2) 5,200# (Dexter) Electric / Spring ($62.00) 3 10k Jack (Bumper Pull) $137.50 52CS (2) 5,200# (Dexter) One Electric / Spring ($164.00) 5 Add Expanded Metal to Sides $15.63 / ft 72BD (2) 7,000# (Dexter) Electric / Drop Axle $166.00 6 6" Taller GN Riser $160.00 72BS * (2) 7,000# (Dexter) Electric / Spring Included A Upgrade to 3" X 3 $0.00 72BT (2) 7,000# (Dexter) Electric / Torsion $264.00 4 Plate for Winch $150.00 72CS (2) 7,000# (Dexter) One Electric / Spring ($57.00) C 12"oc Crossmembers $198.75

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $1,406.00 E Rough Oak Floor $19.38 / ft

H Receiver Hitch $78.75 (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Torsion² $1,871.00

V Rear Trailer Support Jacks $110.00 W Warn M12000 Winch w/Plate & Battery $2,771.25 -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75 -LT10 Light Bar w/4 Lights $345.00 -TB03 Top Riser Toolbox $482.50

Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. -EL01 Add 7-Way RV Plug to Rear Bumper $108.75

A 2' Dovetail w/ 5' Slide-in Ramps $93.00 -LT10 Light Bar w/4 Lights $345.00 B 2' Dovetail w/ 5' Fold-up Ramps $141.00 -TB03 Top Riser Toolbox $482.50 C Straight deck w/ 5' Fold-up Ramps $49.00 Notes:

² Special Order Option: Requires additional confirmation lead-time. K 2' Dovetaill w/ Split Heavy Duty Gate $501.00

S T

Mount Only for Spare Tire Spare Tire and Mount

$35.00 $206.25

P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings & 12"oc Front Toolbox (Bumper Pull)

$48.13 / ft

Q $198.75

72HT

92BS (2) 7000# w/235/85R16 LR-G Tires (Dexter) Electric/Torsion $459.00


(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92GS Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,968.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $1,920.00 92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring

Page 68 of 143 Printed 02/21/2018


(763) 434-2277 5" Channel Buggy Hauler (B5)

B 5 2 1 6 3 2 C S S K B521632CSSK 16' x 5" Channel Buggy Hauler $3,355.00

B521832CSSK 18' x 5" Channel Buggy Hauler $3,399.00 B522032CSSK 20' x 5" Channel Buggy Hauler $3,443.00 B522232CSSK 22' x 5" Channel Buggy Hauler $3,486.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $34.00 D BP 2" Adjustable $110.00 J BP 2 5/16" Adjustable $110.00

Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Desert Tan (t) Equipment Yellow (Texas & Ohio) (y) Grey (g)

M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $34.00 P 3" Pintle Eye - Channel-mount (14,000 lb.) $110.00


$65.00

* The trailer G.V.W.R. cannot exceed the coupler rating. Primer + Black (Texas) (0) $143.00 Primer + Red (Texas) (1) $308.00 Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3)

$350.00



• 7,000 lb. G.V.W.R. • 3,500 lb. x 2 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Top Wind Drop-Leg Jack (8,000 lb.) • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 -ST205/75R15 Radial Tires (1,820 lb) • Electric Breakaway Kit w/ Charger • Rubrail & Stake Pockets

• 9" High Drive Over DP Steel Fenders • 5' Channel Ramps w/ Holder • 5" Channel Frame & Tongue • 3" Channel Crossmembers 24" on Center • 2" Treated Pine Lumber Deck • 102" Wide Deck • DOT Approved Flushmount LED Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • 82 1/2 " Between the Fenders • 5 year Dexter Axle Warranty

*** MAX GVWR 10,400 with 5200 lb Axle Option. *** Bumper Pull Tongue Length (3' 10").

***16"oc crossmembers on 16' and longer with 5200# axle option*** ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on


1 2 3 4 5 6 7 8 9 10 11 Other

Page 69 of 143 Printed 02/21/2018

5" Channel Buggy Hauler (B5) Options


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 3 10k Jack (Bumper Pull) $137.50 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 4 Plate for Winch $150.00

(2) 3,500# (Dexter) $959.00 32SS Surge Hydraulic Drum [Surge Coupler] / Spring²

C 12" oc Crossmembers $397.50

Tail Options:


52CS (2) 5,200# (Dexter) One Electric / Spring $313.00 52ES (2) 5,200# (Dexter) Elect ric / Spring $554.00

52SS (2) 5200# (Dexter) $1,459.00 Surge Hydraulic Drum (Surge Coupler) / Spring

S* Straight Deck w/ 5' Slide-in Ramps Incl. 2 2' Dovetail w/ 5' Slide-in Ramps $63.00 3 2' Dovetail w/ 5' Slide-in Ramps and Fold-up Gate $373.00 A 2' Dovetail w/ 2 Fold-up Ramps $126.00 C Straight Deck w/ 2 Fold-up Ramps $63.00 G Straight Deck w/ 4' Fold-up Gate $248.00 J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $430.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $169.00 R Straight Deck w/ Rear Slide-in Ramps $105.00

P 2” Pipetop Siderails (Removable) $23.75/ft S 11ga (1/8) DP Steel Floor w/4 Flushmount D-Rings & 16”o.c. $30.31/ft T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 X 16"oc Crossmembers $197.50 -BWFL Blackwood Classic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -RT01 Rate at 9900 GVWR $0.00

Page 70 of 143 Printed 02/21/2018


(763) 434-2277 6" Channel Super-Wide (B6)

B 6 J 1 6 7 2 B S S K B6J1672BSSK 16' x 6" Channel Super-Wide $5,330.00

B6J1872BSSK 18' x 6" Channel Super-Wide $5,401.00 B6J2072BSSK 20' x 6" Channel Super-Wide $5,470.00 B6J2272BSSK 22' x 6" Channel Super-Wide $5,541.00 B6J2472BSSK 24' x 6" Channel Super-Wide $5,610.00

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • 5' Channel Ramps w/ Holder • Dual Bulldog Rear Support Jacks • 6" Channel Frame & Tongue

• 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • 102 Wide Deck • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Fender Rating: 4,000 lbs/ea • Rubrail w/Stake Pockets • Tool Tray In Tongue • DOT Approved Flushmount Lifetime LED Lights • GN Option Equipped with 2 Jacks • 82 1/2 " Between the Fenders • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 8" I-beam on Goosenecks. *** Triple Axle Option Available on 20' and longer.

Trailer is 81" wide between the fenders. Trailer will have 80" between fenders with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

*** MAX GVWR 16,500 with 8k Axle Option and 16.5k+ Rated Coupler. *** Bumper Pull Tongue Length (4' 7").

***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on foldup ramps and HD gate options***

1 2 3 4 5 6 7 8 9 10 11 Other

Page 71 of 143 Printed 02/21/2018

6" Channel Super-Wide (B6) Options


52BS (2) 5,200# (Dexter) Electric / Spring² ($70.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BS * (2) 7,000# (Dexter) Electric / Spring Included 2 2nd Jack (Bumper Pull) $206.25 72BT (2) 7,000# (Dexter) Electric / Torsion² $296.00 4 Plate for Winch $150.00

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,850.00 6 6" Taller GN Riser $160.00

7 Douglas Fir Lumber $8.44 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc $89.38 / ft 73BS (3) 7,000# (Dexter) Electric / Spring $1,436.00

(3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,799.00 9 9,990 G.V.W.R. $0.00


(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² $755.00

H Receiver Hitch $78.75 M 2 3/8" Pipetop Siderails (Removable) $23.75 / ft


$1,711.00 P 11ga(1/8")DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc

$48.13 / ft

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,904.00 (2) 8,000# Oil Bath w/215/75R17.5 LR-H

Q Front Toolbox (Bumper Pull) $198.75 S Mount Only for Spare Tire $35.00

K2HS Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$4,383.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75


Tail Options:

V Rear Trailer Support Jacks $110.00 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Z 3" X 3" Square Tubing Top Rail (Removable) $23.75 / ft

S* Straight deck w/ 5' Slide-in Ramps Incl. -BWOT Blackwood Classic Outer Deck $16.25 / ft

A 2' Dovetail w/ 5' Slide-in Ramps $71.00 -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $35.00

B 2' Dovetail w/ 5' Fold-up Ramps $141.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00

C Straight deck w/ 5' Fold-up Ramps $71.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25

D 2' Dovetail w/ 31x66 HD Fold-up Ramps $618.00 -DR01 1 Pair D-Rings $41.25

E 4' Dovetail w/ 5' Slide-in Ramps $71.00 -EL01 Add 7-Way RV Plug to Rear Bumper $108.75

F 4' Dovetail w/ 5' Fold-up Ramps $141.00 -GT10 Ramp Gate Transition Lip $70.00

G 2' Dovetail w/ 3 5' Fold-up Ramps $239.00 -LT10 Light Bar w/4 Lights $345.00

H Straight Deck w/ 4' Heavy Duty Fold-up Gate $366.00 -OD01 1 Pair Flushmount D-Rings on Steel Outer Deck $41.25

J 2' Dovetail w/ 4' Heavy Duty Fold-up Gate $438.00 -RT01 1 Pair Weld-On Strap Ratchets $63.75

K 2' Dovetail w/ Split Heavy Duty Gate $520.00 -SEM3 2 3/8" Pipetop w/Expanded Metal Sides (Removable) $40.00 / ft

L 3.5' Dovetail w/2 Monster Ramps $714.00 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75

M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $194.00 -TB03 Top Riser Toolbox $482.50

N 2' Dovetail w/ 5' Rear Slide-in Ramps $176.00 Notes: ² Special Order Option: Requires additional confirmation lead-time. P 4' Dovetail w/ 5' Rear Slide-in Ramps $248.00

R Straight Deck w/ Rear Slide-in Ramps $105.00 T Straight deck w/ 31x66 HD Fold-up Ramps $546.00 U 4' Dovetail w/ Split Heavy Duty Gate $520.00 V 4' Dovetail w/ 31x66 HD Fold-up Ramps $618.00 W 4' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $194.00 X Straight deck w/ 3 5' Fold-up Ramps $169.00

E Rough Oak Floor $22.19 / ft 92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring² $459.00

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) $3,335.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring²


73HS

92BT

93HS

82BS

Page 72 of 143 Printed 02/21/2018

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (10,000 lb.) • 2 - Dexter E- Z lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • 5' Channel Ramps w/ Holder • Dual Bulldog Rear Support Jacks

• 8" Channel Frame & Tongue • 3" Channel Crossmembers 16" on Center • 2" Treated Pine Lumber Deck • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Rubrail w/Stake Pockets • Tool Tray In Tongue • 81" Between the Fenders • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** 24' and up has 12" I-beam Neck. *** Trailer will have 80" between fenders with 8k, 7k Hydraulic Disc Brake, Torsion and Drop Axles.

*** MAX GVWR 24,000 with Triple 8k Axles and 24k+ Rated Coupler. *** Bumper Pull Tongue Length (5').



(763) 434-2277 8" Channel Super-Wide (B8)

B 8 J 2 0 7 2 B S S K B8J1672BSSK 16' x 8" Channel Super-Wide $5,866.00

B8J1872BSSK 18' x 8" Channel Super-Wide $5,866.00











B8J4072BSSK 40' x 8" Channel Super-Wide $8,020.00 Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

1 2 3 4 5 6 7 8 9 10 11 Other

Page 73 of 143 Printed 02/21/2018

K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring²

$2,858.00

8" Channel Super-Wide (B8) Options

Axle Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 72BT (2) 7,000# (Dexter) Electric / Torsion² $296.00

72GS (2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring² $1,445.00

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,850.00

73BS (3) 7,000# (Dexter) Electric / Spring $1,436.00 (3) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,799.00

Tail Options: S* Straight deck w/ 5' Slide-in Ramps Incl. A 2' Dovetail w/ 5' Slide-in Ramps $71.00 B 2' Dovetail w/ 5' Fold-up Ramps $141.00 C Straight deck w/ 5' Fold-up Ramps $71.00 D 2' Dovetail w/ 31x66 HD Fold-up Ramps $618.00 E 4' Dovetail w/ 5' Slide-in Ramps $71.00 F 4' Dovetail w/ 5' Fold-up Ramps $141.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion $755.00

J 2 Dovetail w/ 4' Heavy Duty Fold-up Gate $438.00 L 3.5' Dovetail w/2 Monster Ramps $714.00 M 2' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $194.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92GS Elec/Hyd Drum (1,000 PSI Pump) / Spring²


$1,968.00 N 2' Dovetail w/ 5' Rear Slide-in Ramps $176.00 P 4' Dovetail w/ 5' Rear Slide-in Ramps $248.00

92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,920.00 R Straight Deck w/ Rear Slide-in Ramps $105.00



$1,711.00

T Straight deck w/ 31x66 HD Fold-up Ramps $546.00 V 4' Dovetail w/ 31x66 HD Fold-up Ramps $618.00 W 4' Dovetail w/ 5' Dbl Hinge Fold-up Ramps $194.00

93BT Electric / Torsion $2,156.00

Other Options:

Notes: ²

0 Cold Weather Wiring Harness (7-way RV) $28.75 2 2nd Jack (Bumper Pull) $206.25 4 Plate for Winch $150.00 6 6" Taller GN Riser $160.00 7 Douglas Fir Lumber $8.44 / ft 8 ¼" DP Steel Floor w/ 4 Flushmount D-Rings & 12"oc $89.38 / ft C 12"oc Crossmembers $198.75 E Rough Oak Floor $22.19 / ft H Receiver Hitch $78.75 M 2 3/8" Pipetop Siderails (Removable) $23.75 / ft P 11ga(1/8") DP Steel Floor w/4 Flushmount D-Rings &

12"oc $48.13 / ft

Q Front Toolbox (Bumper Pull) $198.75 S Mount Only for Spare Tire $35.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 V Rear Trailer Support Jacks $110.00 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 -BWFL Blackwood Classsic Full Deck $27.19 / ft -BWOT Blackwood Classic Outer Deck $16.25 / ft -CP08 Upgrade to 8 Hole Channel Adjustable Coupler $35.00 -DL01 1 Pair of Flushmount D-Rings on Wood Floor $80.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -OD01 1 Pair Flushmount D-Rings on Steel Outer Deck $41.25 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75 -SM02 2 Extra Side Marker Lights, 1 Per Side $70.00 -TB03 Top Riser Toolbox

Notes: ₂ Special Order Option: Requires additional Confirmation lead -Time

$482.50

(2) 8,000# Oil Bath w/235 82BS Electric / Spring² /85R16 LR-G Tires (Dexter) $1,809.00

(2) 8,000# Oil Bath w/235 82BT Electric / Torsion²

/85R16 LR-G Tires (Dexter) $2,600.00

(2) 8,000# Oil Bath w/235 82HS Elec/Hyd Disc (1,600 PSI

/85R16 LR-G Tires (Dexter) Pump) / Spring² $3,335.00

(3) 8,000# Oil Bath w/235 83BS Electric / Spring

/85R16 LR-G Tires (Dexter) $3,736.00

92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring² $459.00

93HS (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring²

$3,904.00

B2BS $1,409.00

G H

2' Dovetail w/ 3 5' Fold-up Ramps Straight Deck w/ 4' Heavy Duty Fold-up Gate

$239.00 $366.00

X Straight deck w/ 3 5' Fold-up Ramps $169.00

73HS

92BT

Page 74 of 143 Printed 02/21/2018


(763) 434-2277 60" Utility Dump (D5)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* 2" A-Frame (7,000 lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $130.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $130.00


* The trailer G.V.W.R. cannot exceed the coupler rating. Primer + Red (Texas) (1) Red (r) $308.00


$369.00

$403.00 Grey (g)


$350.00


• 5,200 lb. G.V.W.R. • 5,200 lb. x 1 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 1 - Dexter E- Z lube Brake Axle (5,200 lb.) • 6 Leaf Double-eye Spring Suspension • 2 - 15" White Spoke Wheels • 2 - ST225/75B15 (2540 lb) • Electric Breakaway Kit w/ Charger • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • Barn Door Gate w/ Camlatch • 4 - D-Rings • 40° Dump Pitch • 12VDC Hydraulic Pump

• 3" x 30" West Craft Hyd. Cylinder • 12' Control Cable • 4" Channel Main Frame & Tongue • 2" x 4" x 11ga. Tubing Bed Frame • 3" Channel Crossmembers 16"oc • Mounting Brackets for Roll-up Tarp • 10ga. Steel Bed • 5' Wide Bed • 10ga. Steel Sides • 18" High Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • 5 year Dexter Axle Warranty

8' has 2.22 cubic yards capacity. 10' has 2.77 cubic yards capacity.

*** MAX GVWR 10,400 with 5200 lb Axle Option and 10,400+ Rated Coupler. *** Bumper Pull Tongue Length (4' 1").

D 5 A 0 8 5 1 B S S K D5A0851BSSK 8' x 60" Utility Dump $3,955.00

D5A1051BSSK 10' x 60" Utility Dump $4,151.00

Page 75 of 143 Printed 02/21/2018

32SS

51GS

60" Utility Dump (D5) Options


(2) 3,500# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $1,378.00

51BS * (1) 5,200# (Dexter) Electric / Spring Included (1) 5,200# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring² $840.00


M Mount Only for Spare Tire $35.00 P Tarp kit (Pull Bar) 5 x14ft $285.00

T Spare Tire and Mount $206.25

(2) 5,200# (Dexter) 52GS Elec/Hyd Drum (1,000 PSI Pump) / Spring²

(2) 5,200# (Dexter)

$1,875.00 V 18" Side Extensions (Expanded Metal) $462.50

Y 18" Side Extensions $412.50 -DR01 1 Pair D-Rings $41.25

52SS Surge Hydraulic Drum [Surge Coupler] / Spring² $1986.00

Tail Options:


T Split / Spreader Gate $278.00 S* Split Gate Incl.

R Ramps $230.00

5 6 C

Solar Battery Charger Upgrade to 235/80 R16 on 52k Axles (Tandem Only) 12"oc Crossmembers

$135.00 $127.50 $135.00

51SS (1) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $509.00

0 Cold Weather Wiring Harness (7-Way RV) $28.75 32BS (2) 3,500# (Dexter) Electric / Spring $526.00

Page 76 of 143 Printed 02/21/2018


(763) 434-2277 72" Tandem Axle Dump (D3)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" A-Frame (12,500lb.) Incl. D BP 2 5/16" Adjustable (14,000 lb.) $128.00 N BP 2 5/16" Atwood Style A-Frame Coupler $34.00 P 3" Pintle Eye - Channel-mount (21,000 lb.) $128.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $143.00 Primer + Red (Texas) (1)

Red (r) $308.00 Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2) Primer + White (Texas) (3) Tractor Green (j) White (w) Equipment Yellow (y) Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5) Tractor Orange (n)

$369.00

$403.00 Grey (g)


• 9,900 lb. G.V.W.R. • 5,200 lb. x 2 G.A.W.R. • 2 5/16" A Frame Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (5,200 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 15" White Spoke Wheels • 4 - 225/75R15 Radial Tires ( lb.) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Treadplate Steel Fenders • Toolbox • Barn Door Gate • 40° Dump Pitch

• 12VDC Hydraulic Pump • 5" x 30" West Craft Hyd. Cylinder • 12' Control Cable • 5" Channel Main Frame & Tongue • 16" On Center 3" Channel Crossmembers • 10ga. Steel Bed • 72" Wide Bed • 20" 10ga Steel Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • 5 year Dexter Axle Warranty

$350.00

D 3 A 1 0 5 2 B S S K D3A1052BSSK 10' x 72" Tandem Axle Dump $5,886.00

D3A1252BSSK 12' x 72" Tandem Axle Dump $6,059.00

Page 77 of 143 Printed 02/21/2018

72" Tandem Axle Dump (D3) Options

Axle Options:

Other Options:

32BS (2) 3,500# (Dexter) Electric / Spring ($290.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75

32SS (2) 3,500# (Dexter) Surge Hydraulic Drum (Surge Coupler) / Spring $406.00

1 Upgrade to 235/80 R16 on 52k $127.50 $406.00

3 Upgrade to Single 10k Jack (Bumper Pull) $137.50 52BS * (2) 5,200# (Dexter) Electric / Spring Included

5 Solar Battery Charger $135.00

52SS (2) 5.200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $906.00 C 12"oc Crossmembers $135.00

Tail Options:

S* Split Gate Incl. T Split / Spreader Gate $354.00

-NTBX No Tarp Mounting Brackets $0.00

-TB24 Side-mount Toolbox 24” (12ft Only) $213.75


-RS01 Rear Support Stands $90.00

-JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $191.25

72BS (2) 7,000# (Dexter) Electric / Spring $105.00 E Power Up/Down & Gravity Down Upgrade $172.50 M Mount Only for Spare Tire $35.00 P Tarp kit (Pull Bar) 6 x 14ft $285.00 R Ramps w 4 D-Rings $191.25 T Spare Tire and Mount (Bumper Pull) $207.50 -DR01 1 Pair D-Rings $41.25 -GAS1 Gas Powered Hydraulic Unit $1,583.75

Page 78 of 143 Printed 02/21/2018


(763) 434-2277 83" Tandem Axle Dump (D7)

D 7 A 1 0 7 2 B S S K D7A1072BSSK 10' x 83" Tandem Axle Dump $7,255.00

D7A1272BSSK 12' x 83" Tandem Axle Dump $7,448.00 D7A1472BSSK 14' x 83" Tandem Axle Dump $7,641.00

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,430.00


L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,064.00 S GN 2 5/16" Square (25,000 lb.) $1,064.00 T HD 2 5/16" Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k) $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings (Welded inside the Box) • 40° Dump Pitch • 12VDC Hydraulic Pump • 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift

• Scissor Lift • 12' Control Cable • Mounting Brackets for Roll-up Tarp • 6" Channel Main Frame & Tongue • 2" x 6" x 11ga. Tubing Bed Frame • 3" Channel Crossmembers 16" on Center • 10ga. Steel Bed • 83" Wide Bed • 10ga. Steel Sides • 24" High Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Stake Pockets • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

10' has 5.12 cubic yards capacity, 12' has 6.14 cubic yards capacity, 14' has 7.17 cubic yards capacity. *** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 79 of 143 Printed 02/21/2018

83" Tandem Axle Dump (D7) Options


Elec/Hyd Drum (1,000 PSI Pump) / Spring²


(2) 5,200# (Dexter) 52SS Surge Hydraulic Drum [Surge Coupler) / Spring $801.00


72BS * (2) 7,000# (Dexter) Elect

Tail Options:

T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 V 24" Side Extensions (Expanded Metal) $658.75 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

G Landscape Gate (No Ramps, No Ramp Pockets) $269.00 Z Grain Chute $317.50

-DON1 Removable Deck on the Neck (102" Wide 96" Long) $1,002.50

-GAS1 Gas Powered Hydraulic Unit $1,583.75

-JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50


-NTBX No Tarp Mounting Brackets $0.00

-PSYW Yellow Pin Striping $70.00


-SG01 Dump Sidegate $681.25

-SP02 Spare Tire & Mount (Bumper Pull) G Rated $277.50

-SW07 7 Gauge Solid Metal Sides & Floor $602.50




-TB24 Side-mount Toolbox 24” (12ft & 14ft Only) $213.75

-TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50


-SLXX No Scissor Lift -$245.00

-RS12 12" Taller GN Riser $317.50

-RM30 No Ramps No Ramp Pockets -$118.75

-PSBK Black Pin Striping $70.00

-JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only) $106.25

-JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,972.50

-JA04 1 Hydraulic 7k Stillwell Jack (Bumper Pull Only) $452.50


-BTRY 1 Extra Battery $233.75

Y 24" Side Extensions (Solid) $587.50 S* Split / Spreader Gate Incl.

H M P

HD 24" Side Extensions 10ga Mount Only for Spare Tire Tarp kit(Pull Bar)7x20ft

$1,133.75 $35.00

$285.00

52BS (2) 5,200# (Dexter) Electric / Spring ($104.00) 0 Cold Weather Wiring Harness (7-Way RV) $28.75

52GS (2) 5,200# (Dexter) $690.00 3 Upgrade to Single 10k Jack (Bumper Pull)

9 9,990 G.V.W.R. $0.00

C 12” oc Crossmembers $135.00 E Power Up/Down & Gravity Down Upgrade $172.50

(2) 7,000# (Dexter) 72GS Elec/Hyd Drum (1,000 PSI Pump) / Spring² $1,445.00

(2) 7,000# (Dexter) 72SS Surge Hydraulic Drum [Surge Coupler] / Spring² $1,080.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $459.00 92BS Electric / Spring


Page 80 of 143 Printed 02/21/2018


(763) 434-2277 83" Wide-Side Dump (DE)

D E A 1 0 7 2 B S S K DEA1072BSSK 10' x 83" Wide-Side Dump $7,869.00

DEA1272BSSK 12' x 83" Wide-Side Dump $8,056.00 DEA1472BSSK 14' x 83" Wide-Side Dump $8,244.00

Standard Features






$296.00

$355.00

$388.00 Grey (g)


$338.00



1 2 3 4 5 6 7 8 9 10 11 Other

Page 81 of 143 Printed 02/21/2018

P Tarp kit(Pull Bar)7x20ft $275.00

83" Wide-Side Dump (DE) Options

Axle Options:

Other Options: 52BS (2) 5,200# (Dexter) Electric / Spring ($105.00) 0 Cold Weather Wiring Harness (7-Way RV) $27.50

52GS (2) 5,200# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $690.00

3 Upgrade to Single 10k Jack (Bumper Pull)

T Spare Tire and Mount (Bumper Pull) $198.75 U Deck on the Neck (102” Wide 96” Long) $643.75 V 24” Side Extensions (Expanded Metal) $635.00 Tail Options: X Bulldog 2-speed Jacks (12,000 lb.) $190.00 S* Split Spreader Gate Incl. Y 24” Side Extensions (Solid) $566.25 G Landscape Gate (No Ramps, No Ramp Pockets)

$269.00 Z Grain Chute $306.25

-BTRY 1 Extra Battery $225.00 -DON1 Removable Deck on the Neck (102” Wide 96” Long) $966.25 -DR01 1 Pair D-Rings $40.00 -GAS1 Gas Powered Hydraulic Unit $1526.25 -JA04 1 Hydraulic 7k Stillwell Jack (Bumper Pull Only) $436.25 -JA05 1 Hydraulic Monster Jack Includes Front Toolbox $1668.75 -JA06 2 Hydraulic Monster Jacks Includes Front Toolbox $1900.00 -JAB1 Upgrade to (1) – Single Bulldog 10K Jack $183.75 -JAB2 Upgrade to (2) – Dual Bulldog 10k Jacks (GN only) $102.50 -NTBX No Tarp Mounting Brackets $0.00 -PSBK Black Pin Striping $67.50 -RM30 No Ramps No Ramp Pockets -$118.75

-RS01 Rear Support Stands $86.25 -RS12 12” Taller GN Riser $306.25 -SLXX No Scissor Lift -$245.00

-SP02 Spare Tire and Mount (Bumper Pull) G Rated $267.50 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $432.50 -SW07 7 Gauge Solid Metal Sides & Floor $580.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $132.50 -TB03 Top Riser Toolbox $468.75 -TB24 Side-mount Toolbox 24” (12ft & 14Ft Only) $206.25 -TB36 Side-mount Toolbox 36” (14ft Only) $231.25


E H M

Power Up/Down & Gravity Down Upgrade HD 24" Side Extensions 10ga Mount Only for Spare Tire

$166.25 $1,092.50

$33.75

9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $130.00

4 Plate for Winch $145.00

(2) 5,200# (Dexter) 52SS Surge Hydraulic Drum [Surge Coupler) / Spring $803.00


72BS * (2) 7,000# (Dexter) Electric / Spring Included 6 6" Taller GN Riser $153.75 (2) 7,000# (Dexter) 72GS Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,445.00

(2) 7,000# (Dexter) 72SS Surge Hydraulic Drum (Surge Coupler) / Spring $1,080.00

92BS (2) 7,000w/235/85R16 LR-G Tires (Dexter) $460.00 Electric / Spring


Page 82 of 143 Printed 02/21/2018


(763) 434-2277 83" High Side Dump (DH)

D H A 1 0 7 2 B S S K DHA1072BSSK 10' x 83" High Side Dump $7,969.00

DHA1272BSSK 12' x 83" High Side Dump $8,163.00 DHA1472BSSK 14' x 83" High Side Dump $8,356.00

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • 2 5/16" Ball Adjustable Bulldog Coupler • Safety Chains • 1 - Top Wind Drop Leg Jack (8,000 lb.) • 2 - Dexter E-Z Lube Brake Axles (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb.) • Defender II Electric Breakaway Kit w/ Charger • 3M DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spreader Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings (Welded inside the Box) • 40° Dump Pitch • 12VDC KTI Hydraulic Pump • 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift

• 12' Control Cable • Mounting Brackets for Roll-up Tarp • 6" Channel Main Frame & Tongue • 2" x 6" x 11ga. Tubing Bed Frame • 3" Channel Crossmembers 16" on Center • 10ga. HD Steel Bed • 83" Extra Wide Bed • 10ga. HD Steel Sides • 48" High Sides (36" Available) • Optronics Flushmount Lifetime LED Lights • Bargman Sealed Wire Harness w/ 7-Way RV Plug • Stake Pockets for Extensions • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 -10k Jacks • GN Option Equipped with Front Toolbox • 5 year Dexter Axle Warranty

10' has 10.25 cubic yards capacity, 12' has 12.30 cubic yards capacity, 14' has 14.33 cubic yards capacity. *** MAX GVWR 16,000 with 16k+ Rated Coupler. ***

Bumperpull Tongue Length (4' 2").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 83 of 143 Printed 02/21/2018

83" High Side Dump (DH) Options



(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring $459.00

-SW03 3ft Tall Sides


Tail Options: S* Split / Spreader Gate Incl.

92GS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,968.00


72BS * (2) 7,000# (Dexter) Electric / Spring Included

72GS

92BS

0 Cold Weather Wiring Harness (7-Way RV) $27.50 8 Full Size Divided Toolbox Upgrade (BP Only) $82.50 C 12"oc Crossmembers $131.25 D 1 Extra Pair of D-Rings $40.00 E Power Up/Down & Gravity Down Upgrade $167.50 H HD 24" Side Extensions 10ga $1,133.75 M Mount Only for Spare Tire $33.75 P Tarp kit(Pull Bar)7x20ft $276.25 T Spare Tire and Mount (Bumper Pull) $200.00 U Deck on the Neck (GN Only) $648.75 V 24" Side Extensions (Expanded Metal) $658.75 X Bulldog 2-speed Jacks (12,000 lb.) $192.50 Y 24" Side Extensions (Solid) $587.50 Z Grain Chute $308.75 -DR01 1 Pair D-Rings $41.25 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,972.50 -RS01 Rear Support Stands $87.50 -$250.00

Page 84 of 143 Printed 02/21/2018

D9A1672BSSK 16' x 83" XL Dump $8,139.00

D 9 A 1 6 7 2 B S S K


(763) 434-2277 83" XL Dump (D9)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00



16' has 8.19 cubic yards capacity. *** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***

*** 6x21 Cylinder Required on Triple Axle (Option -CY06). *** Bumper Pull Tongue Length (4' 3"), Gooseneck Length (9' 2").

Page 85 of 143 Printed 02/21/2018

P Tarp kit (Pull Bar) 7 x 20ft $285.00

83" XL Dump (D9) Options


(2) 7,000# (Dexter)

72GS Elec/Hyd Drum (1,000 PSI Pump) / Spring² 73BS (3) 7,000# (Dexter) Electric / Spring

73JS (3) 7,000# (Dexter) Electric/Hyd Drum Oil Bath / Spring

Tail Options:

T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long $668.75 V 24" Side Extensions (Expanded Metal) $870.00

S* Split/Spreader Gate Included X Bulldog 2-speed Jacks (12,000 lb. $197.50

Y 24" Side Extensions (Solid) $746.25

Z Grain Chute $317.50


-CY06 6" Cylinder Upgrade $267.50

-DON1 Removable Deck on the Neck (102" Wide 96" Long) $1,002.50


-FR01 Fork Rack $275.00

-GAS1 Gas Powered Hydraulic Unit $1,583.75



-LT10 Light Bar w/4 Lights (GN Only) $345.00


-SG01 Dump Sidegate $681.25

-SP02 Spare Tire & Mount (Bumper Pull) G Rated $277.50


-SW07 7 Gauge Solid Metal Sides & Floor $602.50



-TB24 Side-mount Toolbox 24” $213.75

-TB36 Side-mount Toolbox 36” $240.00


E H M

Power Up/Down & Gravity Down Upgrade HD 24" Side Extensions 10ga Mount Only for Spare Tire

$172.50 $1,133.75

$35.00


$1,445.00 $1,024.00

3 Upgrade to Single 10k Jack (Bumper Pull) $137.50 5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00

$3,254.00 8 Full Size Divided Toolbox Upgrade (BP Only) $86.25

9 9,900 G.V.W.R. $0.00 $459.00 C 12"oc Crossmembers $135.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BS Electric / Spring² $459.00


(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $2,009.00 92JS Electric/Hyd Drum Oil Bath / Spring

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) 93BS Electric / Spring $1711.00

Page 86 of 143 Printed 02/21/2018

DCA1672BSSK 16' x 83" XL High Side Dump $9,006.00

D C A 1 6 7 2 B S S K


(763) 434-2277 83" XL High Side Dump (DC)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00



*** MAX GVWR 16,000 *** *** 6x21 Cylinder Required on Triple Axle (Option -CY06). ***


Page 87 of 143 Printed 02/21/2018

72BS * (2) 7,000# (Dexter) Electric / Spring Included

83" XL High Side Dump (DC) Options



0 Cold Weather Wiring Harness (7-Way RV) $28.75 3 Upgrade to Single 10k Jack (Bumper Pull) $137.50 5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00 8 Full Size Divided Toolbox Upgrade (BP Only) $86.25 9 9,900 G.V.W.R. $0.00 C 12"oc Crossmembers $135.00 E Power Up/Down & Gravity Down Upgrade $172.50 H HD 24" Side Extensions 10ga $1,133.75 M Mount Only for Spare Tire $35.00 P Tarp kit (Pull Bar) $285.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y 24" Side Extensions (Solid) $587.50 Z Grain Chute $317.50 -BTRY 1 Extra Battery $233.75 -CY06 6" Cylinder Upgrade $267.50 -DR01 1 Pair D-Rings $41.25 -FR01 Fork Rack $275.00 -GAS1 Gas Powered Hydraulic Unit $1,583.75 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,972.50 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $191.25 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only) $106.25 -RS01 Rear Support Stands $90.00 -RS12 12" Taller GN Riser $317.50 -SW03 3ft Tall Sides -$250.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50 -TB03 Top Riser Toolbox $482.50 -TB24 Side-mount Toolbox 24” $213.75 -TB36 Side-mount Toolbox 36” $240.00

72GS ( (2) 7,000# (Dexter) Elec/Hyd Drum (1000 PSI Pump) / Spring

$1,445.00


92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring² $459.00

92GS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,968.00

92JS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric/Hyd Drum Oil Bath / Spring $2,009.00

93BS Tail O

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring

ptions:

$1,711.00

S* Split / Spreader Gate Incl. G Landscape Gate (No Ramps, No Ramp Pockets) $269.00

Page 88 of 143 Printed 02/21/2018


(763) 434-2277 83" Low Pro Dump (DL)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Drop Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 6' 6" Slide In Channel Ramps • 4 - D-Rings (Welded inside the Box) • 40° Dump Pitch • 12VDC Hydraulic Pump • 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift

• Scissor Lift • 12' Control Cable • Mounting Brackets for Roll-up Tarp • 8" x 10 lb. I-Beam Frame & Tongue • 3" Channel Crossmembers 16" on Center • 10ga. Steel Bed • 83" Wide Bed • 10ga. Steel Sides • 24" High Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Stake Pockets • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • Ultra Low 24" Deck Height • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. *** Bumper Pull Tongue Length (4' 10"), Gooseneck Length (9' 2").

***8k axle will raise deck height on this model by 5” ***

D L A 1 2 7 2 B D S K DLA1272BDSK 12' x 83" Low Pro Dump $7,871.00

DLA1472BDSK 14' x 83" Low Pro Dump $8,064.00

Page 89 of 143 Printed 02/21/2018

83" Low Pro Dump (DL) Options


(2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Drop Axle² $1,079.00

E Power Up/Down & Gravity Down Upgrade $172.50

Y2BS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Spring

(2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)

$1,024.00 H HD 24" Side Extensions 10ga $1,133.75

M Mount Only for Spare Tire $35.00 P Tarp kit(Pull Bar)7x20ft $285.00

Y2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,594.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 V 24" Side Extensions (Expanded Metal) $658.75 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BT Electric / Torsion


$568.00 Y 24" Side Extensions (Solid) $587.50 Z Grain Chute $317.50

92GD Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,966.00 -BTRY 1 Extra Battery $233.75

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92HS Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$1,733.00

-DON1 Removable Deck on the Neck (102" Wide 96" Long)

$1,002.50

K2BS

K2HS

(2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric / Spring² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$2,395.00

$3,920.00

-DR01 1 Pair D-Rings $41.25 -FR01 Fork Rack $275.00 -GAS1 Gas Powered Hydraulic Unit $1,583.75 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50 -LT10 Light Bar w/4 Lights (GN Only) $345.00


Tail Options:

-SP02 Spare Tire & Mount (Bumper Pull) G Rated $277.50 -SP08 215/75/R17.5 (H) 8k Axle Spare Tire and Mount $322.50 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75


S* Split / Spreader Gate Incl.


92BD (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Drop Axle (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring

$459.00

92BS $271.00

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) $3,148.00 Elec/Hyd Disc (1,600 PSI Pump) / Spring

72SD

82BS

72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BS (2) 7,000# (Dexter) Electric / Spring ($187.00) 3 Upgrade to Single 10k Jack (Bumper Pull) $137.50 72BT (2) 7,000# (Dexter) Electric / Torsion² $298.00 5 Solar Battery Charger $135.00 (2) 7,000# (Dexter) $1,445.00 6 6" Taller GN Riser $160.00 72GD Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,445.00 8 Full Size Divided Toolbox Upgrade (BP Only) $86.25

(2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,388.00 72HS

9 9,990 G.V.W.R. $0.00


-SW07 7 Gauge Solid Metal Sides & Floor $602.50 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50 -TB03 Top Riser Toolbox $482.50 -TB24 Side-mount Toolbox 24” (12ft & 14ft Only) $213.75 -TB36 Side-mount Toolbox 36” (14ft Only) $240.00

Page 90 of 143 Printed 02/21/2018


(763) 434-2277 83" Low Pro High Side Dump (DM)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features






$308.00

$369.00

$403.00 Grey (g)


$350.00



*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. *** Bumper Pull Tongue Length (4' 10"), Gooseneck Length (9' 2").


D M A 1 2 7 2 B D S K DMA1272BDSK 12' x 83" Low Pro High Side Dump $8,583.00

DMA1472BDSK 14' x 83" Low Pro High Side Dump $8,778.00

Page 91 of 143 Printed 02/21/2018

83" Low Pro High Side Dump (DM) Options

Axle Options:

(2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,445.00

Other Options: 0 Cold Weather Wiring Harness (7-Way RV) $28.75 3 Upgrade to Single 10k Jack (Bumper Pull) $137.50 5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00 8 Full Size Divided Toolbox Upgrade (BP Only) $86.25 9 9,990 G.V.W.R. $0.00


(2) 7,000# (Dexter)

$1,388.00 H HD 24" Side Extensions 10ga $1,133.75

M Mount Only for Spare Tire $35.00

72SD Surge Hydraulic Drum [Surge Coupler] / Drop Axle² $1,079.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Drop Axle $459.00

P Tarp Kit (Pull Bar) $285.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Y 24" Side Extensions (Solid) $587.50 Z Grain Chute $317.50 -BTRY 1 Extra Battery $233.75 -DR01 1 Pair D-Rings $41.25

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BS Electric / Spring


$271.00

-FR01 Fork Rack $275.00 -GAS1 Gas Powered Hydraulic Unit $1,583.75

92BT Electric / Torsion $568.00 -JA01 HD 25k Jost 2x Jacks $592.50 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50

K2BS (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter)

$2,395.00

-JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only)

$106.25

K2HS

Electric / Spring² (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$3,920.00

-RS01 Rear Support Stands $90.00 -SW03 3ft Tall Sides -$250.00


-TB03 Top Riser Toolbox $482.50 -TB24 Side-mount Toolbox 24” (12ft & 14ft Only) $213.75

(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) 82HS Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,148.00


Tail Options:


G Landscape Gate (No Ramps, No Ramp Pockets) $269.00 S* Split / Spreader Gate Incl.

-JA06 2 Hydraulic Monster Jacks™ -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack

$1,972.50 $191.25

72FD (2) 7,000# (Dexter) Electric Brake with OIL Bath Hub / Drop Axle $274.00

72ST (2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Torsion (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric / Spring

$1,188.00

Y2BS $1,024.00

Y2HS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring $2,594.00

92GD (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring²

$1,966.00

92HS $1,733.00

C E

12"oc Crossmembers Power Up/Down & Gravity Down Upgrade

$135.00 $172.50

-GN06 6" Longer Neck $160.00


72GD

92BD

(2) 5,200# (Dexter) 52SS Surge Hydraulic Drum [Surge Coupler) / Spring2 $614.00

ge

72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included

72BS (2) 7,000# (Dexter) Electric / Spring ($187.00)

72BT (2) 7,000# (Dexter) Electric / Torsion2 $298.00

Page 92 of 143 Printed 02/21/2018

DJA1672BDSK 16' x 83" Low Pro XL Dump $8,580.00

D J A 1 6 7 2 B D S K


(763) 434-2277 83" Low Pro XL Dump (DJ)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 C Rigid Mount Pintle Eye- Face-mount (25,000 lb.) $91.00


E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,430.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,064.00 S GN 2 5/16" Square (25,000 lb.) $1,064.00 T HD 2 5/16" Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k) $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00



16' has 8.19 cubic yards capacity. *** MAX GVWR 16,000 with 8k Axle option and 16k+ Rated Coupler. ***

*** 6x21 Cylinder Required on Triple Axle (Option -CY06). *** Bumper Pull Tongue Length (5'), Gooseneck Length (9' 2").


Page 93 of 143 Printed 02/21/2018

72GD

83" Low Pro XL Dump (DJ) Options


(2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,445.00

73BD (3) 7,000# (Dexter) Electric / Drop Axle $1,116.00 73BS (3) 7,000# (Dexter) Electric / Spring $836.00

3 Upgrade to Single 10k Jack (Bumper Pull) $137.50 5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00 9 9,990 G.V.W.R. $0.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) 92BD Electric / Drop Axle

$459.00 C 12"oc Crossmembers $135.00

LR-G Tires (Dexter)

M Mount Only for Spare Tire $35.00 P Tarp kit (Pull Bar) 7 x 20ft $285.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75

Tail Options:

V 24" Side Extensions (Expanded Metal) $870.00

X Bulldog 2-Speed Jacks (12,000 lb.) $197.50 Y 24” Side Extensions (Solid) $746.25

S* Split / Spreader Gate Incl. Z Grain Chute $317.50

-BTRY 1 Extra Battery $233.75 -CY06 6" Cylinder Upgrade $267.50 -DON1 Removable Deck on the Neck (102" Wide 96" Long) $1,002.50 -DR01 1 Pair D-Rings $41.25 -FR01 Fork Rack $275.00 -GAS1 Gas Powered Hydraulic Unit $1,583.75 -JA01 HD 25k Jost 2x Jacks $592.50 -JA05 1 Hydraulic Monster Jack™ Includes Front Toolbox $1,732.50 -JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,972.50 -JAB1 Upgrade to (1) - Single BULLDOG 10k Jack $191.25 -JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN

Only) $106.25

-LT05 Add LED Reverse Lights $150.00 -LT10 Light Bar w/4 Lights (GN Only) $345.00 -RS01 Rear Support Stands $90.00 -SP02 Spare Tire & Mount (Bumper Pull) G Rated $277.50 -ST05 Spare Tire and Mount (BP) 215/75/R17.5 $448.75 -SW07 7 Gauge Solid Metal Sides & Floor $602.50 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50 -TB03 Top Riser Toolbox $482.50 -TB24 Side-mount Toolbox 24” $213.75 -TB36 Side-mount Toolbox 36” $240.00

0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included

E H

Power Up/Down & Gravity Down Upgrade HD 24" Side Extensions 10ga

$172.50 $1,133.75

V 24" Side Extensions (Expanded Metal) $870.00

(2) 7,000# w/235/85R16 92BS Electric / Spring $271.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $1,966.00 92GD Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle

(3) 7,000# w/235/85R16 LR-G Tires (Dexter) 93BD Electric / Drop Axle $1,805.00

82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) $1,621.00 Electric / Spring

Page 94 of 143 Printed 02/21/2018

DKA1672BDSK 16' x 83" Low Pro XL High Side Dump $9,448.00

D K A 1 6 7 2 B D S K


(763) 434-2277 83" Low Pro XL High Side Dump (DK)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 C Rigid Mount Pintle Eye (25,000 lb.) $91.00


E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,430.00 H GN 2 5/16" Round (30,000 lb.) w/ Toolbox $1,293.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,064.00 S GN 2 5/16" Square (25,000 lb.) $1,064.00 T HD 2 5/16" Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k) $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00



*** MAX GVWR 16,000 with 8k Axle option and 16k+ Rated Coupler. *** *** 6x21 Cylinder Required on Triple Axle (Option -CY06). *** Bumper Pull Tongue Length (5'), Gooseneck Length (9' 2").


Page 95 of 143 Printed 02/21/2018

92BD (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Drop Axle $459.00 C 12"oc Crossmembers $135.00


83" Low Pro XL High Side Dump (DK) Options


72BD * (2) 7,000# (Dexter) Electric / Drop Axle Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BS (2) 7,000# (Dexter) Electric / Spring ($187.00) 3 Upgrade to Single 10k Jack (Bumper Pull) $133.75 72BT (2) 7,000# (Dexter) Electric / Torsion² $109.00 4 Plate for Winch $150.00

72GD (2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle $1,445.00 5 Solar Battery Charger $135.00

6 6" Taller GN Riser $160.00 8 Full Size Divided Toolbox Upgrade (BP Only) $86.25 9 9,990 G.V.W.R. $0.00

73BD (3) 7,000# (Dexter) Electric / Drop Axle $1,116.00 73BS (3) 7,000# (Dexter) Electric / Spring $836.00

M Mount Only for Spare Tire $35.00 P Tarp kit (Pull Bar) 7 x 20ft $285.00 T Spare Tire and Mount (Bumper Pull) $206.25 U Deck on the Neck (102" Wide 96" Long) $668.75

(2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) 82BS Electric / Spring $1,621.00

Y 24" Side Extensions (Solid) $587.50 Z Grain Chute $317.50

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) $3,148.00 Elec/Hyd Disc (1 600 PSI Pump) / Spring²


-CY06 6" Cylinder Upgrade $267.50

Tail O ptions: -DR01 1 Pair D-Rings -FR01 Fork Rack

$41.25 $275.00

S* Split / Spreader Gate Incl. -GAS1 Gas Powered Hydraulic Unit $1,583.75

-JA01 HD 25k Jost 2x Jacks $592.50

-JA06 2 Hydraulic Monster Jacks™ Includes Front Toolbox $1,972.50

-JAB2 Upgrade to (2) - Dual BULLDOG 10k Jacks (GN

Only) $106.25

-LT05 Add LED Reverse Lights $150.00 -SW03 3ft Tall Sides -$250.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50 -TB03 Top Riser Toolbox $482.50 -TB24 Side-mount Toolbox 24” $213.75 -TB36 Side-mount Toolbox 36” $240.00




-GN06 6" Longer Neck $160.00

E H

Power Up/Down & Gravity Down Upgrade HD 24" Side Extensions 10ga

$172.50 $1,133.75 92BS (2) 7000# w/235/85R16 LR-G Tires (Dexter) $271.00

Electric / Spring

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) $1,966.00 92GD Elec/Hyd Drum (1,000 PSI Pump) / Drop Axle


93BD (2) 7,000# w/235/85R16 LR-G Tires (Dexter) $1,805.00 Electric / Drop Axle

Page 96 of 143 Printed 02/21/2018

D8A1472BSSK 14' x 96" Deckover Dump $7,901.00

D 8 A 1 4 7 2 B S S K


(763) 434-2277 96" Deckover Dump (D8)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features



L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,064.00 S GN 2 5/16" Square (25,000 lb.) $1,064.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 80" Slide In Channel Ramps • 4 - D-Rings • 40° Dump Pitch • 12VDC Hydraulic Pump • 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift • 12' Control Cable

• 6" Channel Tongue • Mounting Brackets for Roll-up Tarp • 8" I-Beam Main Frame • 11ga. Fabricated Bed Frame • 3" Channel Crossmembers 16" on Center • 2" x 6" x 11ga. Tubing Outer Bed Frame • 10ga. Steel Bed • 96" Wide Bed • 12ga. Steel Sides • 19" High Fold Down Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • Under Frame Spare Mount on Bumperpulls w/Spare Opt • 5 year Dexter Axle Warranty

14' has 6.22 cubic yards capacity. *** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***


Page 97 of 143 Printed 02/21/2018

96" Deckover Dump (D8) Options

Axle Options:

Other Options: 72BS * (2) 7,000# (Dexter) Electric / Spring Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BT (2) 7,000# (Dexter) Electric / Torsion² $296.00 3 Upgrade to Single 10k Jack (Bumper Pull) $137.50

72HS (2) 7000# (Dexter) Elec/Hyd Disc (1600 PSI Pump) / Spring2 $1,575.00

5 Solar Battery Charger $135.00 6 6" Taller GN Riser $160.00





-LT10 Light Bar w/4 Lights (GN Only) $345.00

92BS (2) 7000# w/235/85R16 LR-G Tires (Dexter) Electric/Spring $459.00 9 9,990 G.V.W.R. $0.00

(2) 8,000# Oil Bath w/215/75R17.5 LR-H C 12"oc Crossmembers $135.00

K2BS Singles(Dexter) Electric / Spring2 $2,583.00


M Mount Only for Spare Tire (Under Frame) $35.00


P Tarp kit (Pull Bar) 8 x 18ft $285.00

82HS (2) 8000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Disc $3,335.00 (1600 PSI Pump) / Spring2 T Spare Tire and Mount (Bumper Pull) (Under $221.25

U Deck on the Neck (102” Wide 96” Long) $668.75 X Bulldog 2-speed Jacks (12,000 lb.)

$197.50

S* Split / Spreader Gate Included In


Page 98 of 143 Printed 02/21/2018


(763) 434-2277 10" I-Beam Deckover Dump (DT)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features



L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,064.00 S GN 2 5/16" Square (25,000 lb.) $1,064.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $56.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Drop Leg Jack (7,000 lb.) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Lockable Toolbox (Houses Battery and Pump) • 2 - Way Gate (Barn Doors & Spread Gate) • 80" Slide In Channel Ramps • 4 - D-Rings • 40° Dump Pitch • 12VDC Hydraulic Pump • 5" x 21" West Craft Hyd. Cylinder w/Scissor Lift • 12' Control Cable

• 10" I-Beam Tongue • Mounting Brackets for Roll-up Tarp • 10" I-Beam Main Frame • 10ga. Fabricated Bed Frame • 3" Channel Crossmembers 16" on Center • 2" x 6" x 11ga. Tubing Outer Bed Frame • 10ga. Steel Bed • 96" Wide Bed • 10ga. Steel Sides • 19" High Fold Down Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty

D T A 1 4 7 2 B S S K DTA1472BSSK 14' x 10" I-Beam Deckover Dump $8,233.00

DTA1672BSSK 16' x 10" I-Beam Deckover Dump $8,496.00

Page 99 of 143 Printed 02/21/2018

10" I-Beam Deckover Dump (DT) Options


72BS * (2) 7,000# (Dexter) Electric / Spring Included 0 Cold Weather Wiring Harness (7-Way RV) $28.75 72BT (2) 7,000# (Dexter) Electric / Torsion² $296.00 3 Upgrade to Single 10k Jack (Bumper Pull) $137.50

72HS (2) 7,000# (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring² $1,575.00 5 Solar Battery Charger $135.00

73HA (3) 7000# (Dexter) 6 6" Taller GN Riser $160.00

Elec/Hyd Disc (1600 PSI Pump) / Air Ride2 $10,529.00 9 9,990 G.V.W.R. $0.00 C 12"oc Crossmembers $135.00

(2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Torsion² $755.00

M Mount Only for Spare Tire (Under Frame) $35.00 P Tarp kit (Pull Bar) 8 x 18ft $285.00

92FT (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric Brake with OIL Bath Hub / Torsion

$1,030.00 T Spare Tire and Mount (Bumper Pull) (Under Frame)

$221.25

(2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Electric / Spring² $1,409.00

U Deck on the Neck (102" Wide 96" Long) $668.75 X Bulldog 2-speed Jacks (12,000 lb.) $197.50

B2HS (2) 8,000# Oil Bath Axles, 235/80 LR-E Tires (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring (2) 8,000# Oil Bath w/215/75R17.5 LR-H

$2,935.00 -DR01 1 Pair D-Rings $41.25 -LT10 Light Bar w/4 Lights (GN Only) $345.00

K2BS Singles(Dexter) Electric / Spring²

$2,583.00 -TB02 Bumper Pull Double Deck Toolbox (Upgrade) $137.50 -TB03 Top Riser Toolbox $482.50

82BS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric / Spring²

82HS (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter)

$1,809.00 Notes: ² Special Order Option: Requires additional confirmation lead-time.

Elec/Hyd Disc (1,600 PSI Pump) / Spring² $3,335.00

Tail Options:


E Power Up/Down & Gravity Down Upgrade $172.50 92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring $459.00

92BT

B2BS

Page 100 of 143 Printed 02/21/2018


(763) 434-2277 Tandem Dual Dump (DD)

D D R 1 6 A 2 B S S K DDR16A2BSSK 16' Tandem Dual Dump $15,254.00

DDR18A2BSSK 18' Tandem Dual Dump $15,566.00 DDR20A2BSSK 20' Tandem Dual Dump $15,879.00

Standard Features

Coupler Options: R* GN 2 5/16" Round (25,000 lb.) Incl. B BP 2 5/16" Adj Rigid Mount (25,000 lb.) w/Tbx $0.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $366.00


H GN 2 5/16" Round (30,000 lb.) $229.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) & Tbx $229.00 P 3" Pintle Eye - Face-mount (36,000 lb.) w/Tbx $0.00 Q GN 2 5/16" Square (30,000 lb.) $229.00 S GN 2 5/16" Square (25,000 lb.) $0.00



$308.00

$369.00

$403.00 Grey (g)


$350.00

• 25,000 lb. G.V.W.R. • 10,000 lb. x 2 G.A.W.R. • GN 2 5/16" Ball Bulldog Coupler 25,000 lb • Safety Chains • 2 - Drop Leg Jacks (10,000 lb.) • 2 - Dexter Oil Bath Brake Axles (10,000 lb.) • 5 Leaf Slipper Spring Suspension • 8 Dual Wheels, 16" Grey, 8 on 6.5" Bolt Pattern • 8 - 16" 235/80R16 Radial Tires (3,090 lb) • Rubrail & Stake Pockets • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • Ladder on Right Side • Lockable Front Toolbox w/ Chain Holder • 2 - Way Gate (Barn Doors & Spread Gate) • 70" Ramps w/ Holders • 4 Flushmount D-Rings

• 45° Dump Pitch • 12VDC Hydraulic Pump • 10 Ton Scissor Lift • 12" x 19 lb. I-Beam Main Frame, Riser & Neck • 2 x 6 x 1/8" Square Tubing Outer Deck Frame • 3" Channel Crossmembers 16 • 10ga. Steel Bed • 96" Wide Bed • 12ga. Steel Sides • 36" High Removable Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • Interstate (TM) Deep Cycle Battery • 110V Integrated Trickle Charger • Dual 5" x 25½" West Craft Hyd. Cylinder w/Hoist • 5 year Dexter Axle Warranty

16' has 14.22 cubic yards capacity. 18' has 16.00 cubic yards capacity. 20' has 17.78 cubic yards capacity.

*** MAX GVWR 28,000 with 12k Axle Option and 28k+ Rated Coupler. *** Gooseneck Length (9' 1").

1 2 3 4 5 6 7 8 9 10 11 Other

Page 101 of 143 Printed 02/21/2018

Tandem Dual Dump (DD) Options


6 6" Taller GN Riser $160.00 9 Under Frame Tie Down Flat $3.13 / ft


(2) 12,000# Axles (Dexter) (2) 12,000# Axles (Dexter)Elec/Hyd Disc (1,600 PSI Pump) / Air Ride2 $3,551.00

N 22 lb. I-Beam Main Frame, Riser & Neck $19.06 / ft P Tarp Kit 100" (Uninstalled) $885.00 U Deck on the Neck (102" Wide 96" Long) $668.75 W Warn M12000 Winch w/Plate & Battery $2,771.25 X Bulldog 2-speed Jacks (12,000 lb.) $197.50 Z Grain Chute $317.50 -DR01 1 Pair D-Rings $41.25 -JA01 HD 25k Jost 2x Jacks $592.50 -JA06 2 Hydraulic Monster Jacks™ $1,972.50 -LT10 Light Bar w/4 Lights (GN Only) $345.00

Tail Options:

B Barn Doors $0.00


H K M

6ft Removable Sides 4" Ratchets every 4ft w/ Slide Track 6" Axle Spread (Longer Equalizer)

$1,548.75 $28.75 / ft

$198.75


B 4ft Removable Sides $516.25

0 5

Cold Weather Wiring Harness (7-Way RV) Solar Battery Charger

$28.75 $135.00

S2BS (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) $971.00 Electric / Spring²

D2BS (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) Electric / Spring (2) 12,000# w/235/85R16 LR-G Dual T&W (Dexter) Elec/Hyd Disc (1,600 PSI Pump) / Spring

$2,483.00

D2HS $4,376.00


C2HS

-RT01 1 Pair Weld-On Strap Ratchets $63.75 -S201 1 Side-mount Toolbox 45"x17½" $397.50 -S401 1 Side-mount Toolbox 72"x17½" $653.75

S2BT (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Electric / Torsion² $2,314.00

S2HS (2)10000# w/235/75r17.5 LR-J Single T&W (Dexter) $3,214.00 Elec/Hyd Disc (1600PSI Pump)/Spring2

A2BS * (2) 10,000# Axles (Dexter) Electric / Spring Included

A2BT (2) 10,000# Axles (Dexter) Electric / Torsion2 $1,343.00

A2HS (2) 10,000# Axles (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Spring2 $2,244.00

T2BS (2) 10,000# w/235/85R16 LR-G Dual T&W(Dexter) $826.00 Electric / Spring

(2) 10,000# w/235/85R16 T2HS Elec/Hyd Disc (1,600 PSI Pump) / Spring $3,064.00

C2BA (2) 12,000# Axles (Dexter) Electric / Air Ride2 $5 495.00


C2HA (2) 12,000# Axles (Dexter)

Elec/Hyd Disc (1,600 PSI Pump) / Air Ride2 $7,389.00 Pu

Page 102 of 143 Printed 02/21/2018

DRA1472BSSK 14' Rollster™ Roll Off Dump $8,515.00

D R A 1 4 7 2 B S S K


(763) 434-2277 Rollster™ Roll Off Dump (DR)

1

2

3

4

5

6

7

8

9

10

11

Other

Standard Features

Coupler Options: A* BP 2 5/16" Adjustable (14,000 lb.) Incl. B BP 2 5/16" Adjustable Rigid Mount (25,000 lb.) $91.00 E GN 2 5/16" Round (30,000 lb.) w/ 6" Longer Tube $1,430.00 L GN Load-Leveling 2 5/16" Square (30,000 lb.) $1,293.00 P 3" Pintle Eye - Channel-mount (20,000 lb.) $0.00 R GN 2 5/16" Round (25,000 lb.) $1,064.00 S GN 2 5/16" Square (25,000 lb.) $1,064.00 T HD 2 5/16" Adj.3 Bolt Coupler w/6 hole Chn Bracket $56.00


Powder Coat Color Options: Black (k) * Incl. No Paint No Primer (Texas) (z) $0.00 Primer + Black (Texas) (0) $143.00 Equipment Yellow (y) Grey (g)

• 14,000 lb. G.V.W.R. • 7,000 lb. x 2 G.A.W.R. • Adjustable 2 5/16" Ball Bulldog Coupler • Safety Chains • 1 - Spring Loaded Drop Leg Jack (10,000 lb) • 2 - Dexter E- Z lube Brake Axle (7,000 lb.) • 6 Leaf Slipper Spring Suspension • 4 - 16" White Spoke Wheels • 4 - 235/80R16 Radial Tires (3,520 lb) • Electric Breakaway Kit w/ Charger • DOT Reflective Tape • 1/8" Treadplate Steel Fenders • Lockable Toolbox (Houses Battery and Pump) • Barn Door Gates • 4 - D-Rings (Welded inside the Box) • 45° Dump Pitch • 12VDC Hydraulic Pump • 5" x 17" West Craft Hyd. Cylinder w/Scissor Lift • Scissor Lift

• 12' Control Cable • BED Mounted 84" X 20' Heavy-Duty UV resistant Tarp • 6" Channel Main Frame & Tongue • 2" x 6" x 11ga. Tubing Bed Frame • 3" Channel Crossmembers 16" on Center • 10ga. Steel Bed • 83" Wide Bed • 10ga. Steel Sides • 48" High Sides • DOT Approved Flushmount Lifetime LED Lights • Sealed Bargman Wire Harness w/ 7-Way RV Plug • Sand Blasted, Acid Washed, Powder Coated • 2 - Power Volt Group 27 Batteries • 110V Integrated Trickle Charger • GN Option Equipped with 2 Jacks • GN Equipped w/Lockable Front Toolbox • 5 year Dexter Axle Warranty • 18.5 Talon Super Winch

*** Base Pricing does not include attachments or bins. *** *** Includes base trailer with dump function. ***

*** Bin capacity 13.26 cubic yards. ***

Red (r) White (w)

$214.00

Primer + Red (Texas) (1) $308.00 Desert Tan (t) Primer + Desert Tan (Texas) (8) Primer + Tractor Green (Texas) (2)

$350.00 Primer + White (Texas) (3) Tractor Green (j)

Primer + Equipment Yellow (Texas) (4) Primer + Tractor Orange (Texas) (5)

$369.00

Tractor Orange (n) Primer + Grey (Texas) (6) $403.00

Page 103 of 143 Printed 02/21/2018

Notes:

Tail Options: ² Special Order Option: Requires additional confirmation lead-time.

Rollster™ Roll Off Dump (DR) Options

Axle Options:

Other Options:

72BS * (2) 7,000# (Dexter) Electric / Spring Included 0 Cold Weather Wiring Harness (7-Way RV) $23.75 Y2BS (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter)

Electric / Spring $1,211.00 X Bulldog 2-speed Jacks (12,000 lb.) $343.75

-CWB1 Upgrade to Black Spoke Wheels $67.50

92BS (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric / Spring $459.00 -KD01 1 - Roll Off Dump w/Barn Door $3,862.50

(2) 8,000# Oil Bath w/215/ 75R17.5 LR-H -KD02 2 - 1 - Roll Off Dump w/Barn Door $7,723.75

K2BS Singles(Dexter) $2,583.00 -KD03 3 - 1 - Roll Off Dump w/Barn Door $11,586.25

Electric / Spring² -KD04 4 - 1 - Roll Off Dump w/Barn Door $15,448.75


85R16 LR-G Tires (Dexter) $1,809.00 -KD05 5 - 1 - Roll Off Dump w/Barn Door $19,312.50

S* Straight Deck Incl.

Page 104 of 143 Printed 02/21/2018


(763) 434-2277 60" Single Axle Channel Utility (U6)

U 6 2 0 8 3 1 D S S K U620831DSSK 8' x 60" Single Axle Channel Utility $1,296.00

U621031DSSK 10' x 60" Single Axle Channel Utility $1,342.00 U621231DSSK 12' x 60" Single Axle Channel Utility $1,388.00 U621431DSSK 14' x 60" Single Axle Channel Utility $1,433.00

Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $34.00 J BP 2 5/16" Adjustable $110.00


M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $34.00 P 3" Pintle Eye - Channel-mount $110.00



$65.00

• 2,990 lb. G.V.W.R. • 3,500 lb. x 1 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 1 - Dexter E- Z lube Idler Axle (3,500 lb.) • 4 Leaf Double-eye Spring Suspension • 2 - NEW 15" White Spoke Wheels • 2 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders

• 4" Channel Frame & Tongue • 2 1/2" x 2 1/2" x 3/16" Angle Crossmembers • 2" x 2" Removable Side Rail • 2" x 2" Top Rail • 2" Treated Canadian Spruce Pine Fir Deck • 60" Wide Deck • Flushmount 6” Oval Lifetime LED Tail Lights • Sealed Wire Harness • Sand Blasted, Acid Washed, Powder Coated • 5 year Dexter Axle Warranty

*** Must have 3, 500 lb axles with Tilt Deck Tail Option. *** *** Drop and Torsion Axle options will come with Steel Fender. ***

Bumper Pull Tongue Length (3' 4"). ***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove***

1 2 3 4 5 6 7 8 9 10 11 Other

Page 105 of 143 Printed 02/21/2018

60" Single Axle Channel Utility (U6) Options


31DD (1) 3,500# (Dexter) Idler / Drop Axle² $146.00 2 2ft Expanded Metal Sides $30.31 / ft 31DS * (1) 3,500# (Dexter) Idler / Spring Included 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $326.00 4 4ft Expanded Metal Sides $41.56 / ft 31ES (1) 3,500# (Dexter) Electric / Spring $180.00 5 Regular Sides w/Solid Metal $15.63 / ft


6 7

Regular Sides w/Expanded Metal $15.63/ft

51DS (1) 5,200# (Dexter) Idler / Spring $264.00 7 Upgrade to 7k Jack $92.50 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $451.00 8 2 Stake Pockets in front of Trailer $12.50

Tail Options: J LED Light Upgrade Clearance/Marker $46.25 M Expanded Metal Floor $15.94 / ft P 2" Pipetop Removable Siderails $102.50 Q Rubrail $5.31 / ft S 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 16"oc $30.31 / ft T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 W 12" oc Crossmembers $95.00 X 16"oc Crossmembers $41.25 Z 22" Solid Metal Sides w/ 2" pipe-top $30.31 / ft -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -GT10 Ramp Gate Transition Lip $70.00 -TB01 Front Toolbox (with 7k Jack) $268.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $127.50


-WR01 Trimmer Rack Kit $137.50

51ES (1) 5,200# (Dexter) Electric / Spring (1) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring²

$444.00

51SS $898.00 C F

Landscape Toolbox (Must Have Siderails) Steel Diamond Plate Fenders

$282.50 $0.00

G 4ft Side Gate (14ft or longer) $178.75

S* Straight Deck Incl. 2 Dovetail w/ 5' Slide-in Ramps $254.00 4 4' Dovetail w/ 5' Slide-in Ramps $351.00 A Dovetail w/ 2 Fold-up Ramps $303.00 B Dovetail w/ 4' Fold-up Gate $229.00 C Straight Deck w/ 2 Fold-up Ramps $254.00 D 4' Dovetail w/ 2 Fold-up Ramps $400.00 F Straight Deck with Fold In Gate $250.00 G Straight Deck w/ 4' Fold-up Gate $179.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $300.00 J Dovetail w/ 4' Heavy Duty Fold-up Gate $349.00 K Straight Deck w/ Bi-Fold Gate $263.00 M Dovetail w/ Bi-Fold Gate $311.00 N 4' Dovetail w/ Bi-Fold Gate $408.00 R Straight Deck w/ 5' Slide-in Ramps $205.00 T Tilt Deck (Single Axle - ATV Use Only) $49.00 X Dovetail w/ Split Heavy Duty Gate $431.00

Page 106 of 143 Printed 02/21/2018


(763) 434-2277 60" Tndm Axle Channel Utility (UC)

U C 2 0 8 3 2 C S S K UC21032CSSK 10' x 60" Tndm Axle Channel Utility $2,118.00

UC21232CSSK 12' x 60" Tndm Axle Channel Utility $2,164.00 UC21432CSSK 14' x 60" Tndm Axle Channel Utility $2,209.00 UC21632CSSK 16' x 60" Tndm Axle Channel Utility $2,255.00 UC21832CSSK 18' x 60" Tndm Axle Channel Utility $2,301.00 UC22032CSSK 20' x 60" Tndm Axle Channel Utility $2,346.00 UC22232CSSK 22' x 60" Tndm Axle Channel Utility $2,392.00

Standard Features



J BP 2 5/16" Adjustable $110.00 M BP 2" Atwood Style A-Frame Coupler $0.00 N BP 2 5/16" Atwood Style A-Frame Coupler $34.00 P 3" Pintle Eye - Channel-mount $110.00



$65.00

• 7,000 lb. G.V.W.R. • 3,500. x 2 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 2 - Dexter E- Z lube Idler Axle (3,500 lb.) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders


*** Must have 3500lb axles with Tilt Deck Tail option. *** *** Drop and Torsion Axles will come with Steel Fender. ***

*** 5,200 lb axles come with 16'. *** ***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 107 of 143 Printed 02/21/2018

60" Tndm Axle Channel Utility (UC) Options


S* Straight Deck Incl. J LED Light Upgrade Clearance/Marker $46.25 2 Dovetail w/ 5' Slide-in Ramps $254.00 M Expanded Metal Floor $15.94 / ft 4 4' Dovetail w/ 5' Slide-in Ramps $351.00 P 2" Pipetop Removable Siderails $102.50 A Dovetail w/ 2 Fold-up Ramps $303.00 Q Rubrail $5.31 / ft B Dovetail w/ 4' Fold-up Gate $229.00 S 11ga (1/8") DP Steel Floor w/ 4 D-Rings & 16"oc $30.31 / ft C Straight Deck w/ 2 Fold-up Ramps $254.00 T Mount Only for Spare Tire $35.00 D 4' Dovetail w/ 2 Fold-up Ramps $400.00 U Rear Trailer Support Jacks $110.00 F Straight Deck with Fold In Gate $250.00 V Spare Tire and Mount $135.00 G Straight Deck w/ 4' Fold-up Gate $179.00 W 12" oc Crossmembers $95.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $300.00 X 16"oc Crossmembers $41.25 J Dovetail w/ 4' Heavy Duty Fold-up Gate $349.00 Z 22" Solid Metal Sides w/ 2" pipe-top $30.31 / K Straight Deck w/ Bi-Fold Gate $263.00 -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft M Dovetail w/ Bi-Fold Gate $311.00 -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft N 4' Dovetail w/ Bi-Fold Gate $408.00 -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $40.00 Q Straight Deck w/ Split Heavy Duty Gate $409.00 -DR01 1 Pair D-Rings $41.25 R Straight Deck w/ 5' Slide-in Ramps $205.00 -GT10 Ramp Gate Transition Lip $70.00 T Tilt Deck (Single Axle - ATV Use Only) $49.00 -TB01 Front Toolbox (with 7k Jack) $268.75 U Straight Deck w/ Split Gate $263.00 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 X Dovetail w/ Split Heavy Duty Gate $431.00 -TD05 5 Sets of Cargo Tie Down (10) Loops $70.00 Y Dovetail w/ 3' Fold-up Gate $229.00 -WR01 Trimmer Rack Kit $137.50


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 2 2ft Expanded Metal Sides $30.31 / ft 32DS (2) 3,500# (Dexter) Idler / Spring ($179.00) 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 4 4ft Expanded Metal Sides $41.56 / ft

(2) 3,500# (Dexter) 5 Regular Sides w/Solid Metal $15.63 / ft 32MS Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag /

Spring² $819.00 6 Regular Sides w/Expanded Metal $15.63 / ft

(2) 3,500# (Dexter) $959.00 32SS Surge Hydraulic Drum [Surge Coupler] / Spring² 52CS (2) 5,200# (Dexter) One Electric / Spring $408.00 52ES (2) 5,200# (Dexter) Electric / Spring $633.00 Tail Options:

6 Regular Sides w/Expanded Metal $15.63/ft

7 Upgrade to 7k Jack $92.50 8 2 Stake Pockets in front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $98.75 C Landscape Toolbox (Must Have Siderails) $282.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or Longer) $178.75

Page 108 of 143 Printed 02/21/2018


(763) 434-2277 72" Sngl Axle Channel Utility (U2)

U 2 2 1 0 3 1 D S S K U220831DSSK 8' x 72" Sngl Axle Channel Utility $1,365.00

U221031DSSK 10' x 72" Sngl Axle Channel Utility $1,365.00 U221231DSSK 12' x 72" Sngl Axle Channel Utility $1,414.00 U221431DSSK 14' x 72" Sngl Axle Channel Utility $1,463.00

Standard Features






$65.00

• 2,990 G.V.W.R. • 3,500 x 1 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • 1 - Dexter E- Z lube Idler Axle (3,500 lb.) • 4 Leaf Double-eye Spring Suspension • 2 - NEW 15" White Spoke Wheels • 2 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders


*** Must have 3,500 lb axles with Tilt Deck Tail option. *** ***Dovetail option - 14' and shorter get a 16" dove and 16' and longer get a 2' dove***

1 2 3 4 5 6 7 8 9 10 11 Other

Page 109 of 143 Printed 02/21/2018

72" Sngl Axle Channel Utility (U2) Options

Axle Options: Other Options: 31DS * (1) 3,500# (Dexter) Idler / Spring Included 1 LED Lic. Plate Light $6.25 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $326.00 2 2ft Expanded Metal Sides $30.31 / ft 31ES (1) 3,500# (Dexter) Electric / Spring $180.00 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 31ET (1) 3,500# (Dexter) Electric / Torsion² $326.00 7 Upgrade to 7k Jack $92.50 51DS (1) 5,200# (Dexter) Idler / Spring $264.00 8 2 Stake Pockets In Front of Trailer $12.50 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $706.00 A Side Mount ATV Ramps (12ft or Longer) $98.75 51ES (1) 5,200# (Dexter) Electric / Spring $444.00 C Landscape Toolbox (Must Have Siderails) $282.50 51ET (1) 5,200# (Dexter) Electric / Torsion² $591.00 E Side Bi-Fold Gate $275.00


F Steel Diamond Plate Fenders $0.00 J LED Light Upgrade Clearance/Marker $46.25 M Expanded Metal Floor $15.94 / ft

Tail Options: Q Rubrail $5.31 / ft

S* Straight Deck Incl. T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 X 16" oc Crossmembers $41.25

B Dovetail w/ 4' Fold-up Gate $229.00 F Straight Deck with Fold In Gate $250.00 G Straight Deck w/ 4' Fold-up Gate $193.00


-DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -EL07 7 Way Plug Upgrade $73.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD02 2 Sets of Cargo Tie Down (4) Loops $28.75

Page 110 of 143 Printed 02/21/2018


(763) 434-2277 72" Tndm Axle Channel Utility (UJ)

U J 2 0 8 3 2 C S S K UJ21032CSSK 10' x 72" Tndm Axle Channel Utility $2,139.00

UJ21232CSSK 12' x 72" Tndm Axle Channel Utility $2,188.00 UJ21432CSSK 14' x 72" Tndm Axle Channel Utility $2,236.00 UJ21632CSSK 16' x 72" Tndm Axle Channel Utility $2,285.00 UJ21832CSSK 18' x 72" Tndm Axle Channel Utility $2,334.00 UJ22032CSSK 20' x 72" Tndm Axle Channel Utility $2,383.00 UJ22232CSSK 22' x 72" Tndm Axle Channel Utility $2,431.00

Standard Features






$65.00



*** Must have 3,500 lb axles with Tilt Deck Tail option. *** ***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 111 of 143 Printed 02/21/2018

32MS (2) 3,500# (Dexter) Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag / Spring

$819.00

72" Tndm Axle Channel Utility (UJ) Options


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 2 2ft Expanded Metal Sides $30.31 / ft 32DS (2) 3,500# (Dexter) Idler / Spring ($179.00) 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $476.00 4 4ft Expanded Metal Sides $41.56 / ft 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 5 Regular Sides w/Solid Metal $15.63 / ft 32ET (2) 3,500# (Dexter) Electric / Torsion $476.00 6 Regular Sides w/Expanded Metal $15.63 / ft

(2) 3,500# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) / Spring $1,176.00


52CS (2) 5,200# (Dexter) One Electric / Spring $448.00 52ES Tail O

(2) 5,200# (Dexter) Electric / Spring ptions:

$595.00

S* Straight Deck Incl. 2 Dovetail w/ 5' Slide-in Ramps $254.00 B Dovetail w/ 4' Fold-up Gate $229.00 F Straight Deck with Fold In Gate $250.00 G Straight Deck w/ 4' Fold-up Gate $193.00


32GS 7 Upgrade to 7k Jack $92.50 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $98.75 C Landscape Toolbox (Must Have Siderails) $282.50 E Side Bi-Fold Gate $275.00 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $178.75 J LED Light Upgrade Clearance/Marker $46.25 M Expanded Metal Floor $15.94 / ft P 2" Pipetop Removable Siderails $102.50 Q Rubrail $5.31 / ft S Steel Floor w/ 4 D-Rings & 16"oc $30.31 / ft T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 W 12" oc Crossmembers $95.00 X 16" oc Crossmembers $41.25 Z 22" Solid Metal Sides w/ 2" pipe-top $30.31 / ft -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft -DR01 1 Pair D-Rings $41.25 -GT10 Ramp Gate Transition Lip $70.00 -TB01 Front Toolbox (with 7k Jack) $268.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $70.00 -WR01 Trimmer Rack Kit $137.50

Page 112 of 143 Printed 02/21/2018





Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $34.00 J BP 2 5/16" Adjustable $110.00





$65.00



*** Must have 3,500 lb axles with Tilt Deck Tail option. *** ***Drop and Torsion Axle options will come with Steel Fender. ***


1 2 3 4 5 6 7 8 9 10 11 Other

Page 113 of 143 Printed 02/21/2018



31DD (1) 3,500# (Dexter) Idler / Drop Axle² $146.00 2 2ft Expanded Metal Sides $30.31 / ft 31DS * (1) 3,500# (Dexter) Idler / Spring Included 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 31DT (1) 3,500# (Dexter) Idler / Torsion² $146.00 4 4ft Expanded Metal Sides $41.56 / ft 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $326.00 5 Regular Sides w/Solid Metal $15.63 / ft 31ES (1) 3,500# (Dexter) Electric / Spring $180.00 6 Regular Sides w/Expanded Metal $15.63 / ft 31ET (1) 3,500# (Dexter) Electric / Torsion² $326.00 7 Upgrade to 7k Jack $92.50

31SS (1) 3,500# (Dexter) $568.00 Surge Hydraulic Drum [Surge Coupler] / Spring

8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $98.75 B 4ft Solid Metal Sides $41.56 / ft C Landscape Toolbox (Must Have Siderails) $282.50 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $178.75

51DS (1) 5,200# (Dexter) Idler / Spring $264.00 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $706.00 51ES (1) 5,200# (Dexter) Electric / Spring $444.00 51ET (1) 5,200# (Dexter) Electric / Torsion² $591.00

(1) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring² $898.00

Tail Options:

J LED Light Upgrade Clearance/Marker $46.25 M Expanded Metal Floor $15.94 / ft P 2" Pipetop Removable Siderails $102.50 Q Rubrail $5.31 / ft S Steel Floor w/ 4 D-Rings & 16"oc $30.31 / ft T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 W 12" oc Crossmembers $95.00 X 16" oc Crossmembers $41.25 Z 22" Solid Metal Sides w/ 2" Pipe Top $30.31 / ft -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -GT10 Ramp Gate Transition Lip $70.00 -TB01 Front Toolbox (with 7k Jack) $268.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $127.50 -WP01 Plate for Winch $150.00 -WR01 Trimmer Rack Kit $137.50


51SS

S* Straight Deck Incl. 2 Dovetail w/ 5' Slide-in Ramps $254.00 4 4' Dovetail w/ 5' Slide-in Ramps $351.00 A Dovetail w/ 2 Fold-up Ramps $303.00 B Dovetail w/ 4' Fold-up Gate $229.00 C Straight Deck w/ 2 Fold-up Ramps $254.00 D 4' Dovetail w/ 2 Fold-up Ramps $400.00 F Straight Deck with Fold In Gate $250.00 G Straight Deck w/ 4' Fold-up Gate $193.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $313.00 J Dovetail w/ 4' Heavy Duty Fold-up Gate $363.00 K Straight Deck w/ Bi-Fold Gate $275.00 M Dovetail w/ Bi-Fold Gate $325.00 N 4' Dovetail w/ Bi-Fold Gate $420.00 R Straight Deck w/ 5' Slide-in Ramps $205.00 T Tilt Deck (Single Axle - ATV Use Only) $49.00 U Straight Deck w/ Split Gate $275.00 X Dovetail w/ Split Heavy Duty Gate $445.00

Page 114 of 143 Printed 02/21/2018


(763) 434-2277 77" Tndm Axle Channel Utility (UK)

U K 2 0 8 3 2 C S S K UK21032CSSK 10' x 77" Tndm Axle Channel Utility $2,151.00

UK21232CSSK 12' x 77" Tndm Axle Channel Utility $2,205.00 UK21432CSSK 14' x 77" Tndm Axle Channel Utility $2,259.00 UK21632CSSK 16' x 77" Tndm Axle Channel Utility $2,313.00 UK21832CSSK 18' x 77" Tndm Axle Channel Utility $2,368.00 UK22032CSSK 20' x 77" Tndm Axle Channel Utility $2,421.00 UK22232CSSK 22' x 77" Tndm Axle Channel Utility $2,475.00

Standard Features






$65.00

• 7,000 G.V.W.R. • 3,500 x 2 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • (2) 3,500# (Dexter) One Electric (Spring) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders


*** Must have 3500lb axles with Tilt Deck Tail option. *** *** 5,200 lb axles come with 16" on center cross members. ***

*** Drop and Torsion Axle options will come with Steel Fender. *** Bumper Pull Tongue Length (3' 5").

***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove*** ***Rear support jacks standard on 16' or longer w/5200# axles or larger and also including ramps without support legs. Support legs only come standard on


1 2 3 4 5 6 7 8 9 10 11 Other

Page 115 of 143 Printed 02/21/2018

32MS (2) 3,500# (Dexter) Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag / Spring

$819.00

77" Tndm Axle Channel Utility (UK) Options


32CS * (2) 3,500# (Dexter) One Electric / Spring Included 2 2ft Expanded Metal Sides $30.31 / ft 32DS (2) 3,500# (Dexter) Idler / Spring ($179.00) 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $476.00 4 4ft Expanded Metal Sides $41.56 / ft 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 5 Regular Sides w/Solid Metal $15.63 / ft 32ET (2) 3,500# (Dexter) Electric / Torsion $476.00 6 Regular Sides w/Expanded Metal $15.63 / ft



52CS (2) 5,200# (Dexter) One Electric / Spring $448.00 52ES (2) 5,200# (Dexter) Electric / Spring $595.00

Tail Options:


32GS

S* Straight Deck Incl. 2 Dovetail w/ 5' Slide-in Ramps $254.00 4 4' Dovetail w/ 5' Slide-in Ramps $351.00 A Dovetail w/ 2 Fold-up Ramps $303.00 B Dovetail w/ 4' Fold-up Gate $229.00 C Straight Deck w/ 2 Fold-up Ramps $254.00 D 4' Dovetail w/ 2 Fold-up Ramps $400.00 E 4' Dovetail w/ 4' Fold-up Gate $353.00 F Straight Deck with Fold In Gate $250.00 G Straight Deck w/ 4' Fold-up Gate $193.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $313.00 J Dovetail w/ 4' Heavy Duty Fold-up Gate $363.00 K Straight Deck w/ Bi-Fold Gate $275.00 M Dovetail w/ Bi-Fold Gate $325.00 N 4' Dovetail w/ Bi-Fold Gate $420.00 P Dovetail w/ Split Gate $325.00 Q Straight Deck w/ Split Heavy Duty Gate $409.00 R Straight Deck w/ 5' Slide-in Ramps $205.00 T Tilt Deck (Single Axle - ATV Use Only) $49.00 U Straight Deck w/ Split Gate $275.00 V Dovetail w/Ramp Bars Only $68.00 X Dovetail w/ Split Heavy Duty Gate $445.00 Y Dovetail w/ 3' Fold-up Gate $229.00 Z Straight Deck w/ 3' Fold-up Gate $193.00

7 Upgrade to 7k Jack $92.50 8 2 Stake Pockets In Front of Trailer $12.50 A Side Mount ATV Ramps (12ft or Longer) $98.75 C Landscape Toolbox (Must Have Siderails) $282.50 E Side Bi-Fold Gate $275.00 F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $178.75 J LED Light Upgrade Clearance/Marker $46.25 M Expanded Metal Floor $15.94 / ft P 2" Pipetop Removable Siderails $102.50 Q Rubrail $5.31 / ft S Steel Floor w/ 4 D-Rings & 16"oc $30.31 / ft T Mount Only for Spare Tire $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 W 12" oc Crossmembers $95.00 X 16" oc Crossmembers $41.25 Z 22" Solid Metal Sides w/ 2" Pipe Top $30.31 / ft -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -GT10 Ramp Gate Transition Lip $70.00 -TB01 Front Toolbox (with 7k Jack) $268.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $68.75 -WR01 Trimmer Rack Kit $137.50

Page 116 of 143 Printed 02/21/2018





Standard Features

Coupler Options: 2* BP 2" A-Frame Incl. A BP 2 5/16" A-Frame $34.00 D BP 2" Adjustable $110.00 J BP 2 5/16" Adjustable $110.00

Powder Coat Color Options: Black (k) * Incl. No Paint (z) $0.00 Desert Tan (t) Grey (g) Red (r)




$65.00



*** Must have 3,500 lb axles with Tilt Deck Tail option. *** *** Drop and Torsion Axle options will come with Steel Fender. ***

*** Trailer will have 80" Frame with Drop & Torsion Axles *** Bumper Pull Tongue Length (3' 7").

***Dovetail Option - 14’ And Shorter Get a 16” Dove And 16’ And Longer Get a 2’ Dove***

1 2 3 4 5 6 7 8 9 10 11 Other

Page 117 of 143 Printed 02/21/2018



31DS * (1) 3,500# (Dexter) Idler / Spring Included 2 2ft Expanded Metal Sides $30.31 / ft 31DT (1) 3,500# (Dexter) Idler / Torsion² $284.00 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 31ED (1) 3,500# (Dexter) Electric / Drop Axle² $326.00 4 4ft Expanded Metal Sides $41.56 / ft 31ES (1) 3,500# (Dexter) Electric / Spring $180.00 5 Regular Sides w/Solid Metal $15.63 / ft


6 7

Regular Sides w/Expanded Metal Upgrade to 7k Jack

$15.63 / ft $$92.50

51DS (1) 5,200# (Dexter) Idler / Spring $264.00 A Side Mount ATV Ramps (12ft or longer) $98.75 51ED (1) 5,200# (Dexter) Electric / Drop Axle² $706.00 B 4ft Solid Metal Sides $41.56/ft

Tail Options: H 2 ft. Side Rails (No Mesh) $8.75 / ft J LED Light Upgrade Clearance/Marker $46.25 M Expanded Metal Floor $15.94 / ft P 2" Pipetop Removable Siderails $102.50 S 11ga DP Steel Floor w/4 D-Rings & 16"oc $30.31 / ft T Spare Tire Mount $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 W 12" oc Crossmembers $95.00 X 16"oc Crossmembers $41.25 Z 22" Solid Metal Sides w/ 2" pipe-top $30.31 / ft -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft -DM01 1 Extra Pair Flushmount D-Rings on Steel Floor $41.25 -DR01 1 Pair D-Rings $41.25 -GT10 Ramp Gate Transition Lip $70.00 -SEM9 3ft 12ga Solid Metal Sides $35.63 / ft -TB01 Front Toolbox (with 7k Jack) $268.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TW05 Upgrade to 235/80 R16 on 5.2 Axles $127.50 -WR01 Trimmer Rack Kit $137.50


51ES (1) 5,200# (Dexter) Electric / Spring (1) 5,200# (Dexter) Surge Hydraulic Drum [Surge Coupler] / Spring²

$444.00

51SS $898.00 C F

Landscape Toolbox (Must Have Siderails) Steel Diamond Plate Fenders

$282.50 $0.00

G 4ft Side Gate (14ft or longer) $178.75

S* Straight Deck Incl. 2 Dovetail w/ 5' Slide-in Ramps $254.00 4 4' Dovetail w/ 5' Slide-in Ramps $351.00 A Dovetail w/ 2 Fold-up Ramps $303.00 B Dovetail w/ 4' Fold-up Gate $229.00 C Straight Deck w/ 2 Fold-up Ramps $254.00 D 4' Dovetail w/ 2 Fold-up Ramps $400.00 E 4' Dovetail w/ 4' Fold-up Gate $353.00 F Straight Deck with Fold In Gate $265.00 G Straight Deck w/ 4' Fold-up Gate $208.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $326.00 J Dovetail w/ 4' Heavy Duty Fold-up Gate $375.00 K Straight Deck w/ Bi-Fold Gate $288.00 M Dovetail w/ Bi-Fold Gate $339.00 P Dovetail w/ Split Gate $339.00 R Straight Deck w/ 5' Slide-in Ramps $205.00 T Tilt Deck (Single Axle - ATV Use Only) $49.00 U Straight Deck w/ Split Gate $288.00 X Dovetail w/ Split Heavy Duty Gate $458.00

Page 118 of 143 Printed 02/21/2018


(763) 434-2277 83" Tndm Axle Channel Utility (UL)

U L 2 1 0 3 2 C S S K UL21032CSSK 10' x 83" Tndm Axle Channel Utility $2,163.00

UL21232CSSK 12' x 83" Tndm Axle Channel Utility $2,216.00 UL21432CSSK 14' x 83" Tndm Axle Channel Utility $2,270.00 UL21632CSSK 16' x 83" Tndm Axle Channel Utility $2,325.00 UL21832CSSK 18' x 83" Tndm Axle Channel Utility $2,379.00 UL22032CSSK 20' x 83" Tndm Axle Channel Utility $2,433.00 UL22232CSSK 22' x 83" Tndm Axle Channel Utility $2,486.00

Standard Features






$65.00

• 7,000 G.V.W.R. • 3,500 x 2 G.A.W.R. • 2" Ball Bulldog Coupler • Safety Chains • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.) • (2) 3,500# (Dexter) One Electric (Spring) • 4 Leaf Double-eye Spring Suspension • 4 - NEW 15" White Spoke Wheels • 4 - ST205/75R15 Radial Tires (1,820 lb) • Stake Pockets • 9" x 33" Treadplate Removable Alum Fenders


*** Must have 3,500 lb axles with Tilt Deck Tail option. *** *** 5,200 lb axles come with 16" on center cross members. ***

*** Drop and Torsion Axle options will come with Steel Fender. *** *** Trailer will have 80" Frame with Drop & Torsion Axles. ***



1 2 3 4 5 6 7 8 9 10 11 Other

Page 119 of 143 Printed 02/21/2018

83" Tndm Axle Channel Utility (UL) Options


32CD (2) 3,500# (Dexter) One Electric / Drop Axle² $294.00 2 2ft Expanded Metal Sides $30.31 / ft 32CS * (2) 3,500# (Dexter) One Electric / Spring Included 3 Upgrade to 225/75 R15 on 3.5k Axles $92.50 32CT (2) 3,500# (Dexter) One Electric / Torsion² $431.00 4 4ft Expanded Metal Sides $41.56 / ft 32DS (2) 3,500# (Dexter) Idler / Spring ($179.00) 5 Regular Sides w/Solid Metal $15.63 / ft 32ED (2) 3,500# (Dexter) Electric / Drop Axle² $476.00 6 Regular Sides w/Expanded Metal $15.63 / ft 32ES (2) 3,500# (Dexter) Electric / Spring $183.00 7 Upgrade to 7k Jack $92.50 32ET (2) 3,500# (Dexter) Electric / Torsion² $614.00 8 2 Stake Pockets In Front of Trailer $12.50


F Steel Diamond Plate Fenders $0.00 G 4ft Side Gate (14ft or longer) $178.75 J LED Light Upgrade Clearance/Marker $46.25 K 4 ft. Side Rails (No Mesh) $17.50 / ft M Expanded Metal Floor $15.94 / ft P 2" Pipetop Removable Siderails $102.50

Tail Options: S 11ga DP Steel Floor w/4 D-Rings & 16"oc $30.31 / ft

T Spare Tire Mount $35.00 U Rear Trailer Support Jacks $110.00 V Spare Tire and Mount $135.00 W 12" oc Crossmembers $95.00 X 16"oc Crossmembers $41.25 Z 22" Solid Metal Sides w/ 2" pipe-top $30.31 / ft -BWFL Blackwood Classic Lumber Full Deck $27.19 / ft -BWOT Blackwood Classic Lumber Outer Deck $16.25 / ft -DL01 1 Pair of Flushmount D-Rings on Wood Floor $77.50 -DR01 1 Pair D-Rings $41.25 -GT10 Ramp Gate Transition Lip $70.00 -TB01 Front Toolbox (with 7k Jack) $268.75 -TD01 1 Set of Cargo Tie Down (2) Loops $12.50 -TD05 5 Sets of Cargo Tie Down (10) Loops $68.75 -WR01 Trimmer Rack Kit $137.50


Q Rubrail $5.31 / ft

32MS (2) 3,500# (Dexter) Surge Hyd. Drum [Surge Coupler] 1 Brake 1 Drag / Spring²

$819.00


A C E

Side Mount ATV Ramps (12ft or Longer) Landscape Toolbox (Must Have Siderails) Side Bi-Fold Gate

$98.75 $282.50 $287.50

32GS

(2) 3,500# (Dexter) 32SS Surge Hydraulic Drum [Surge Coupler] / Spring² $959.00 52CS (2) 5,200# (Dexter) One Ele ctric / Spring $408.00 52ES (2) 5,200# (Dexter) Electric / Spring $633.00

S* Straight Deck Incl. 2 Dovetail w/ 5' Slide-in Ramps $254.00 3 4' Dovetail w/ Split Gate $435.00 A Dovetail w/ 2 Fold-up Ramps $303.00 B Dovetail w/ 4' Fold-up Gate $229.00 C Straight Deck w/ 2 Fold-up Ramps $254.00 D 4' Dovetail w/ 2 Fold-up Ramps $400.00 E 4' Dovetail w/ 4' Fold-up Gate $353.00 F Straight Deck with Fold In Gate $265.00 G Straight Deck w/ 4' Fold-up Gate $208.00 H Straight Deck w/ 4' Heavy Duty Fold-up Gate $326.00 J Dovetail w/ 4' Heavy Duty Fold-up Gate $375.00 K Straight Deck w/ Bi-Fold Gate $288.00 M Dovetail w/ Bi-Fold Gate $339.00 P Dovetail w/ Split Gate $339.00 Q Straight Deck w/ Split Heavy Duty Gate $409.00 R Straight Deck w/ 5' Slide-in Ramps $205.00 T Tilt Deck (Single Axle - ATV Use Only) $49.00 W Straight Deck w/ 3' Fold-up Gate $180.00 X Dovetail w/ Split Heavy Duty Gate $458.00 Y Dovetail w/ 3' Fold-up Gate $229.00

PRODUCT SPECIFICATION GUIDE

Product Code

Trailer Model

Deck Length Deck

Height Deck

Width* Width Inside

Fenders No. of Axles

Axle Sizes (lbs)

Std. Tire Size

A6 60” All Steel Utility 8’ & 10’ 21” 60” 60” 1 3500 205/75/R15 B5 5” Channel Buggy Hauler 18’ & 20’ 22” 102” 83” 2 3500, 5200 205/75/R15 B6 6” Channel Super-Wide 16’ - 24’ 26” 102” 81.5” 2 5200, 7000 235/80/R16 B8 8” Channel Super-Wide 20’ - 44’ 28” 102” 81.5” 2 or 3 7000 235/80/R16 C1 Single Axle HD Carhauler 10’-16’ 21” 83” 83” 1 7000 235/80/R16 C4 4” Channel Carhauler 14’, 16’, & 18’ 21” 83” 83” 2 3500 205/75/R15 C5 5” Channel Carhualer 14’ - 20’ 22” 83” 83” 2 3500 205/75/R15 C8 8” Channel Equipment 20’ - 40’ 27” 83” 83” 2 or 3 7000, 8000 235/80/R16 CC 6” Channel Equipment 16’ - 24’ 25” 83” 83” 2 or 3 5200, 7000, 8000 235/80/R16 CE 5” Channel Equipment 12’-22’ 22” 83” 83” 2 5200 225/75/R15 D2 78” Medium Duty Dump 10’ & 12’ 28” 78” 78” 2 3500, 5200 225/75/R15 D3 72” Tandem Axle Dump 10’-12’ 28” 72” 72” 2 5200, 7000 225/75/R15 D5 60” Utility Dump 8’ & 10’ 26” 60” 60” 1 or 2 3500, 5200 225/75/B15 D7 83” Tandem Axle Dump 10’ - 14’ 32” 83” 83” 2 5200, 7000 235/80/R16 D8 96” Deckover Dump 14’ 34” 96” N/A 2 7000, 8000 235/80/R16 D9 83” XL Dump 16’ 32” 83” 83” 2 7000 235/80/R16 DC 83” XL High Side Dump 16’ 32” 83” 83” 2 or 3 7000 235/80/R16 DD Tandem Dual Dump 16’ - 20’ 39” 94” N/A 2 10000, 12000 235/80/R16 DH 83” High Side Dumpx 10’-14’ 32” 83” 83” 2 7000 235/80/R16 DJ 83” Low Pro XL Dump 16’ 24” 83” 83” 2 or 3 7000 235/80/R16 DK 83” Low Pro XL High Side Dump 16’ 24” 83” 83” 2 or 3 7000, 8000 235/80/R16 DL 83” Low-Pro Dump 12’ & 14’ 24” 83” 83” 2 7000 235/80/R16 DM 83” Low Pro High Side Dump 12’ & 14’ 24” 83” 83” 2 7000, 8000 235/80/R16 DN 84” Deckover Dump 10’, 12’, & 14’ 32” 84” N/A 2 5200, 7000 235/80/R16 DR Rollster™ Roll Off Dump 14’ 32” 83” N/A 2 7000, 8000 235/80/R16 DS 16’ Deckover Dump 16’ 38” 91” N/A 2 7000, 8000 235/80/R16 DT 10” I-Beam Deckover Dump 14’, 16’ 34” 96” N/A 2 7000, 8000 235/80/R16 F8 8” I-beam Deckover 16’ - 30’ 33” 96” N/A 2 or 3 5200, 7000 , 8000 235/80/R16 FD Classic Flatdeck with Dual 20’ - 40’ 38” 102” N/A 2 or 3 10000, 12000, 16000 235/80/R16 FS Classic Flatdeck with Singles 20’ - 40’ 36” 102” N/A 2 or 3 7000, 8000 235/80/R16 FY Flatdeck with Hydraulic Dovetail 30’ - 40’ 37” 102” N/A 2 or 3 10000, 12000, 16000 235/80/R16 L3 14” I-Beam Low-Pro with Duals 20’- 42’ 36” 102” N/A 2 or 3 10000, 12000, 16000 235/80/r16 L5 Light Duty Deckover 16’ - 20’ 30” 102” N/A 2 3500 225/75/R15 L6 Medium Duty Deckover 16’ - 20’ 33” 102” N/A 2 5200 225/75/R15 LD Low-Pro with Duals 20’ - 40’ 33” 102” N/A 2 or 3 10000, 12000 235/80/R16 LS Low-Pro Flatdeck with Singles 20’-44’ 33” 102” N/A 2 or 3 7000, 8000 235/80/R16 LY Low-Pro with Hydraulic Dovetail 30’ - 40’ 33” 102” N/A 2 or 3 10000, 12000 235/80/R16 P6 Angle Pipetop Trailer 14’ - 20’ 19” 83” 83” 2 3500 205/75/R15 P7 Angle Pipetop Trailer 16’, 18’, & 20’ 21” 83” 83” 2 5200 225/75/R15 P8 Angle Pipetop Trailer 16’, 18’, & 20’ 23” 83” 83” 2 7000 235/80/R16 PD Classic Pintle with Duals 20’ - 40’ 38” 102” N/A 2 or 3 10000, 12000, 15000 235/80/R16 PL Low-Pro Pintle with Duals 20’ - 40’ 33” 102” N/A 2 or 3 10000, 12000, 15000 235/80/R16 PT Pipe Hauler 40’ 35” 84” N/A 2 or 3 7000 235/80/R16 SD Step Deck Trailer 41’ - 53’ (total) 38” 102” N/A 2 or 3 12000, 15000, 16000 235/80/R16 SY Flatdeck with Singles Hydr Dove 32’ - 40’ 36” 102” N/A 3 7000, 8000 235/80/R16 T1 Single Axle HD Tilt 13’, 16’ 21” 81” 81” 1 7000 235/80/R16 T5 5” Channel Tilt 16’ & 20’ 24” 83” 83” 2 3500, 5200 225/75/R15 T6 6” Channel Tilt 16’, 20’, 22’, & 24’ 21” 83” 82” 2 or 3 7000 235/80/R16 T7 8” Channel Tilt 16’ - 40’ 24” 83” 82” 2 or 3 7000, 8000 235/80/R16 T8 Deckover Tilt 22’ & 26’ 32” 96” N/A 2 7000, 8000 235/80/R16 T9 HD Deckover Tilt 24’, 26’, 28’, & 30’ 36” 102” N/A 2 7000, 8000 235/80/R16 TD Tandem Dual Tilt 24’ - 40’ 37” 102” N/A 2 10000, 12000 235/80/R16 TF Powered Full Tilt 18’ - 24’ 22” 83” 82” 2 5200, 7000 235/80/R16 TH 83” Hydraulic Quick Tilt 16’ - 20’ 24” 83” 83” 2 3500, 5200 205/75/R15 TJ 6” Channel HD Equipment Tilt 16’ - 24’ 23” 82” 82” 2 or 3 7000, 8000 235/85/R16 TK 8” Channel HD Equipment Tilt 16’ - 44’ 23” 82” 82” 2 or 3 7000, 8000 235/85/R16 TM 83” Manual Tilt 16’, 18’, & 20’ 23” 83” 83” 2 3500, 5200 205/75/R15 U2 72” Channel Utility 8’ - 14’ 21” 72” 72” 1 3500, 5200 205/75/R15 U6 60” Channel Utility 8’ - 20’ 21” 60” 60” 1 3500, 5200 205/75/R15 U7 77” Channel Utility 8’ - 20’ 21” 77” 77” 1 3500, 5200 205/75/R15 U8 83” Channel Utility 8’ - 20’ 21” 83” 83” 1 3500, 5200 205/75/R15 UC 60” Tandem Channel Utility 10’ - 20’ 21” 60” 60” 2 3500, 5200 205/75/R15 UJ 72” Tandem Channel Utility 10’ - 22’ 21” 72” 72” 2 3500, 5200 205/75/R15 UK 77” Tandem Channel Utility 10’ - 22’ 21” 77” 77” 2 3500, 5200 205/75/R15 UL 83” Tandem Channel Utility 10’ - 22’ 21” 83” 83” 2 3500, 5200 205/75/R15

Please Note: Specifications subject to change without notice. Please contact PJ Trailers directly to verify specifications. All measurements may vary +/- 1” * Deck width measured from rub rail to rub rail where applicable.

Documents

SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5 ...5... · T8 . Deckover Tilt ; 42 . DR ; Rollster™ Roll Off Dump . 102 ; T9 . ... Torque Tube $12.50 / ft . 92HT (2) 7,000# w/235/85R16