Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
X-II-Z SWD EN 2016-05(MACM) -④
Please read the maunal book and maintenance book before operation, changes are periodically added to the information, and Sunward may change the products or services described in this book at any time without announcement. All rights of this manual book reserve to Sunward. SUNWARD Internal Use Only
SWD DOWN-THE-HOLE DRILLING RIGSUNWARD EUROPE HEAVY INDUSTRY NVAdd: Nijverheidspark 3, 3580 Beringen, Belgium
Tel: (0032-011) 434666
E-mail: [email protected]
SUNWARD INTELLIGENT EQUIPMENT CO.,LTD.Add: Sunward Intelligent Industrial Park, Xingsha, Changsha, 410100, China.
Tel: (0086-731) 83572 828 Fax: (0086-731) 83572 661
E-mail: [email protected]
Web: www.sunward.com.cn
Advanced Assembly Line
SERVICE
SWDDTH Drilling Rig
SWDDTH Drilling Rig
Personalized service with optimum solution, perfect designing & manufacturing system, Free technical training and honest marketing.
Executing contracts and promises in good faith.
Service program of free training,routine inspection on
site,parts distribution center close to dealers and service supports provided throughout the machine 's
service life.
Berfore sales
On sales
After sales
SWD series down-the-hole drill rig is widely used in mining and construction, such as cement, metallurgy, coal mine,
quarry, railway, hydropower and national defense construction. The rig is equipped with high pressure drilling
system, which offers accurate and efficient drilling. The rig gives an economic alternative with extraordinary
performance for drilling holes in the 90~255 mm diameter range.
Drilling system, power system and air compressor are mounted on a compact structure, giving a remarkably nimble machine.
All hydraulic operations are centrally controlled with the Pilot Joystick.
Equipped with air conditioning, the cab is operator friendly and comfortable.
The SWD drilling rig is equipped with highly reliable crawler system.
The drilling system has a carousel tube handling system with deep hole capacity and free selection of drill tubes, enabling to increase working efficiency.
SWD series of Hydraulic Downhole Drilling Rig
SWDA/BDTH Drilling Rig
SWDA/BDTH Drilling Rig
Thanks to the two-stage vibration reduction mechanism, the rotary table has longer life span.
Anti-jamming system enables the protection of drill rod in case of accident.
Highly effective flushing and dust aspiring device help to maintain clean working environment.
When it is needed, Sunward can tailor make more sophisticated drilling rig (for example with auto-swing mechanism)
SWDEDTH Drilling Rig
SWDEDTH Drilling Rig
Optimized power matching is guaranteed by the separate power drives (one for hydraulic system and the other for compressor).
Drilling system, power system and air compressor are mounted on a compact structure, giving a remarkably nimble machine.
The SWD drilling rig is equipped with a floating chassis. Additionally, four service hydraulic cylinders allow keeping the machine perfectly stable when drilling on a slope or on a rocky surface.
Hydraulic dri l l ing boom operates smoothly, f lexibly, precisely and quickly.
The SWDE drilling rig features long reach and large coverage area.
Operating system and monitoring system are located on the same board, which offers the possibility of easy to use and to maintain.
When the drilling boom is unfolded, the main machine body is exposed to less harmful impact caused by drilling vibration and dust pollution. Consequently, not only does the machine have longer life span, but also the drilling precision is much improved.
The drilling system has a carousel tube handling system with deep hole capacity and free selection of drill tubes, enabling to increase working efficiency.
Highly effective flushing and dust aspiring device help to maintain clean working environment.
Equipped with air conditioning, the cab is operator friendly and comfortable.
Based on SWD DTH Drilling Rig for mining, SWDW Offshore DTH Drilling Rig is specially designed for underwater and offshore
works. Mounted on an engineering vessel or on a barge, Offshore DTH Drilling Rig is the very adapted machine for dredging,
blasting of submerged reef and offshore earthmoving works.
All hydraulic operations are centrally controlled with the Pilot proportional Joystick.
Hydraulic clamper guarantees the guidance of casing and precise positioning.
The machine moves back and forth on rail, and the drive system can be either hydraulic motor or electric motor coupled with a reducer.
Reliable braking is ensured by four hydraulic bakers and one additional spare manual brake.
Two stage operating platforms offer maintenance access, and can be folded while off-duty.
The main winch and the auxiliary one offer sufficient power, making the dr i l l ' s aux i l ia ry serv ice and maintenance work far more easier.
9P
Offshore DTH Drilling Rig
SWDWSWDWOffshore DTH Drilling Rig
SUNWARD is a leading supplier of down-the-hole drilling rig in China, thanks to its superior capacity of R&D and manufacturing. Since
its mass production and marketing, SUNWARD's market share keeps ever increasing. Our prestigious customers includes Huaxin
Cement, Jindong Cement, Wuhan Steel and Anshan Steel etc. Moreover, SUNWARD DTH down-the-hole drilling rig has been winning
confidence of overseas customers from Canada, Australia,, Nigeria, Russia, Kazakhstan, Mongolia,Vietnam and Burma.
SWDE Drilling Range120
SWDDTH
27453485
7760
849
35
65
14991
18
4
84
35
1942
262
R3414
R2808
R785
57
3
39
63
35
4
47
14
51
85
31
18
34
65
1468
18°
42°
Jobist: High speed railway in LibyaJobist: Mongolia Jobist: Myitkyina Jade mine in Myanmar
SWDDTH Drilling Rig
PARAMETER UNIT SWDB 120
Drilling range mm 90~ 138
Lead zinc ore mine in IranRock quarry in Vietnam Job site in Lake Baikei, Russia
Specification
Drill hammer 3.5"、4"Drill rod diameter mm 89Drill rod length 7.5m×3mDrilling depth m 22
Model 550RHAir pressure 0.65~ 1.7
AIR COMPRESSOR
Air volume of work 15.5Power 179/1800
m³/minkW/rpm
Model 4BT3.9Power 60/2200
ENGINE
Fuel tank 360L
kW/rpm
Length of drillrig 10500Thrust stock 8000
PROPELLING
Feed extension 1200mmmmmm
Thrust speed 0.5Thrust capacity 32kN
m/s
Pitch degree —
Overturn degree —
°
°
Boom length,total —
Lifing angle —
BOOM
Swing angle —
mm
TRAVELLINGTravel speed 2km/hMax. traction force 100Grade ability 25°
°
°
kN
Crawler pendulum feet frame —
Max. rising height from ground 440°
mm
ROTARY POWER HEADModel DLT18BRotary speed 70Rotary torque 3000
rpm
NmDIAMENSIONGross weight 15.5Working state(L×W×H) 6.5×4.2×10.8Transportation state(L×W×H) 10.8×3.2×3.4
mmmm
t
SWDE 120
90~ 1383.5"、4"、5"
834m×6
24
550RH0.65~ 1.7
15.5179/1800
4BT3.975/2200
470
6920438012000.832
140-20~ 90
280050~ -30
15(L) / 45(R)
3.210025
±10480
DLT18B70
3000
15.510.3×3.12×3.57.76×3.12×8.44
SWDF 138
90~ 1523.5"、4"、5"
833m×6
18
—
1.38~ 1.912~ 21.2—
4BT3.975/2200
140
592038008000.832
140-20~ 90
220050~ -30
15(L) / 45(R)
3.210025
±10480
DLT18B70
3000
8.2×2.5×3.26.3×2.5×6.2
—
SWDDTH
SWDDTH
PARAMETER UNIT
Specification
mm
mm
m
m³/min
kW/rpm
L
kW/rpm
mm
mm
mm
kN
m/s
°
°
mm
km/h
°
°
°
kN
°
mm
rpm
Nm
Drilling range
Drill hammer
Drill rod diameter
Drill rod length
Model
Air pressure
Air volume of work
Power
Power
Fuel tank
Length of drillrig
Thrust stock
Feed extension
Thrust speed
Thrust capacity
Pitch degree
Overturn degree
Boom length,total
Lifing angle
Swing angle
Travel speed
Max. traction force
Grade ability
Crawler pendulum feet frame
Max. rising height from ground
Model
Rotary speed
Rotary torque
Gross weight
Working state(L×W×H)
Transportation state(L×W×H)
mm
mm
t
mDrilling depth
Model
SWDA 165
138~ 180
5"、6"
110、133
8.5m×3
25
E750XH
1.38
21.2
185
Y200-4
60
—
11500
9000
1800
0.8
40
—
—
—
—
—
2
125
25
—
480
DLT40B
60
4000
23
7.2×4.3×12
12×3.2×3.14
SWDB 165
138~ 180
5"、6"
110、133
8.5m×3
25
825XH
1.38
23.4
216/2200
4BT3.9
75/2200
600
11500
9000
1800
0.8
40
—
—
—
—
—
2
125
25
—
480
DLT40B
60
4000
23
7.2×4.3×12
12×3.2×3.14
SWDA 165C
138~ 180
5"、6"
110、133
8.5m×3
25
E750
1.38
21.2
185
4BT3.9+Y200-4
75/2200+60
200
11500
9000
1800
0.8
40
—
—
—
—
—
2
125
25
—
480
DLT40B
60
4000
28
8.1×4.65×12
12×3.4×3.14
BESJ1000
2.07
28.3
315
SWDE 165
138~ 180
5"、6"
110
6m×6
36
DLQ825XH
1.38
23.4
216/2200
4BT3.9
75/2200
580
9230
6500
1300
0.5
40
2
125
25
480
DLT40B
50
4000
23
11×3.2×3.6
9.5×3.65×9.6
BDSJ1070
2.1
30.3
328/1800
140
-20~ 90
3200
50~ -30
15(L) / 45(R)
±10
AIR COMPRESSOR
ENGINE
PROPELLING
BOOM
TRAVELLING
ROTARY POWER HEAD
DIAMENSION
PARAMETER UNIT
mm
mm
m
m³/min
kW/rpm
L
kW/rpm
mm
mm
mm
kN
m/s
°
°
mm
°
°
°
kN
°
mm
rpm
Nm
Drilling range
Drill hammer
Drill rod diameter
Drill rod length
Model
Air pressure
Air volume of work
Power
Power
Fuel tank
Length of drillrig
Thrust stock
Feed extension
Thrust speed
Thrust capacity
Pitch degree
Overturn degree
Boom length,total
Lifing angle
Swing angle
Max. traction force
Grade ability
Crawler pendulum feet frame
Max. rising height from ground
Model
Rotary speed
Rotary torque
Gross weight
Working state(L×W×H)
Transportation state(L×W×H)
mm
mm
t
mDrilling depth
Model
AIR COMPRESSOR
ENGINE
PROPELLING
BOOM
km/hTravel speed
TRAVELLING
ROTARY POWER HEAD
DIAMENSION
SWDA 200
180~ 255
6"、8"
146
10m×3
30
BESJ1000
2.07
28.3
315
Y200-4
60
—
13200
10500
1800
0.8
75
—
—
—
—
—
2
175
25
—
480
DLT60
50
6000
30
8.3×4.15×13.9
13.9×3.35×3.45
SWDB 200
180~ 255
6"、8"
146
10m×3
30
BDSJ1070
2.07
30.3
328/1800
6BT5.9
97/2200
13200
10500
1800
0.8
75
—
—
—
—
—
2
175
25
—
480
DLT60
50
6000
30
8.3×4.15×13.9
13.9×3.35×3.45
700
SWDA 200C
180~ 255
6"、8"
146
10m×3
30
BESJ1000
2.07
28.3
315
4BT3.9+Y200-4
75/2200+60
13200
10500
1800
0.8
75
—
—
—
—
—
2
175
25
—
480
DLT60
50
6000
30
8.3×4.15×13.9
13.9×3.35×3.45
200
SWDE 200
178
6"、8"
146
4m×6、6m×3
18
XRVS1050
2.5
29.8
328/1800
6BT5.9
97/2200
9800
6500
1300
0.5
75
4 / 2.1
175
25
—
480
DLT60
55
6000
30
12 3.4 3.6× ×
9.2 4.1 9.8× ×
300
140
-20~ 90
2600
50~ -30
15(L) / 45(R)
SWDF 200
6"、8"
146
4m×6
24
—
1.38~ 2.5
21.2~ 30.3
—
4BT3.9
75/2200
6920
4380
1200
0.4
75
3.2
100
25
480
DLT60
35
6000
17
9.04 2.95 3.4× ×
7.79 2.95 7.8× ×
500
140
-20~ 90
2200
50~ -30
15(L) / 45(R)
180~ 255
±10
To meet the requirements of civil explosive market,
Sunward developed SWDR series rotary cutting
drill rig based on mature excavator platform.
The rig is equipped with efficient feed
system and with air compressor for
flushing. The rig drills at high cutting
speed, capable of replacing pneumatic
pick and other manual works, which
offers high productivity at low cost.
Dujiangyan job site, Chengdu: 3.2m hole drilled in 40 second
Low Energy Consumption and High Drilling Efficiency
Mounted on crawler chassis, operating platform can swing 360
High Mobility and Flexibility
Comfortable CabSpacious cab gives good moveability and comfort for the operator
SWDRHydraulic Drilling Rig
SWDR Series of Hydraulic Drilling Rig Specification
SWDRHydraulic Drilling Rig
PARAMETER UNIT SWDR 80Amm
Drill rod diameter
80Drilling range
mm 51
Drill rod length m 3.66
Drilling depth m 3.2
Upper rotation 360°
AIR COMPRESSOR
Model TA-120
Air pressure Mpa 0.7
Air volume of work 3m /min 1.5
kW/rpmPower 11
ENGINE
Model V3300-DI
kW/rpmPower 54.9/2600
LFuel tank 140
PROPELLING
Length of drillrig mm 4800
mmThrust stock 3500
Thrust speed m/s 0.5
Max. thrust capacity kN 10
Max. lifting force kN 30
° —Arm swing
TRAVELLING
km/hTravel speed (Max./Min.) 4.5 / 3.1
kN Max. traction force 55
Grade ability 25°
mmGround clearance 338
Crawler pendulum feet frame —
barGround pressure 0.435
°
ROTARY POWER HEAD
Model —
Rotary speed rpm 320
Rotary torque Nm 870
DIAMENSION
tGross weight 7.8
Working state(LxWxH) m 6.1×2.2×5.02
m 8.5 2.2 3.15× ×Transportation state(LxWxH)
SWDR 100
80 100~
51
4.3
4
360
SZ2.4-7
0.7
2.4
16
4TNV106T-SHL
74.3/2200
175
5830
4000
0.6
12.5
30
—
4.2 / 2.5
65
25
348
—
0.428
DLT12
300
1200
9
6.35 2.32 5.85× ×
9.15 2.32 2.75× ×
SWDR 125
80 100~
51、57
4.35
4
360
SZ4-7
0.7
4
22
AA-4BG1TCP
89/2100
260
5830
4000
0.6
12.5
30
—
5.4 / 3.3
115
25
410
—
0.45
DLT12
300
1200
15
7.95 2.5 6.0× ×
10.55 2.5 2.85× ×
SWDR 138
105 152~
83
4
24
360
550RH
1.7
15.5
179/1800
6BG1TRP
125/2100
300
8200
4500
0.8
40
50
—
5.6 / 3.45
160
25
480
—
0.5
DLT40R
200
4000
24
11 3.4 8.5× ×
14.8 3.4 3.5× ×
SWDR 150
115 152~
83
5
15
—
650SHP
1.9
18.4
194/1800
6BG1TRP
125/2100
300
8000
5500
0.8
40
50
+20~ 40
3.2 / 1.6
125
25
480
0.7
DLT40R
200
4000
22
8.5 3.2 8.5× ×
12.7 3.2 3.4× ×
±10