Targetec Engineering Sdn. Bhd.

Brand PARKER

C Series Check Valve

Description

Parker’s C Series Check Valves are designed as a compact, inline checkvalve. These check valves provide uni-directional flow control of fluids andgases. To help prevent improper installation, all check valves have a flowarrow label with the valve’s crack pressure rating permanently attached.The availability of a wide range of seat materials provide the systemdesigner a variety of uses over a standard, general purpose check valve.

Markets:• Oil and Gas• Pulp and paper• Pharmaceutical• Power

Features/ Benefits:• Resilient, custom molded, blow-out resistant seat design• Back stopped poppet minimizes spring stress• 100% factory tested for both crack and reseat• Cracking pressures include: 1/3, 1, 5, 10, 25, 50, 75, and 100 psi.• Port connections include male and female NPT, CPI™, A-LOK®,UltraSeal, VacuSeal, BSP, SAE and Seal-Lok®• Heat code traceability

Applications:• Test Panels• Back Flow Preventers

Brand PARKER

SWB Series Ball Valves

Description

Parker’s SWB Series, Swing - Out Ball Valves are a three piece design.These instrumentation ball valves are durable valves that can handlevarious low pressure (2,500 PSI) pressure tubing and piping loads. Theball valve’s center body section can swing out provide quick and easyvalve seat, seals and the ball replacement. All of this repair capability iswithout having to remove the valve from the instrumentation tubing orpiping system.

Markets:• Pulp and Paper• Chemical• Petrochemical• Power• General Industry

Features/Benefits:• Low internal volume

1 of 12

• Free floating ball design allows for seat wear compensation• Self-compensating stem seal• Spring-loaded seats• Blow out resistant stem • Fully enclosed body bolting• Four bolt construction • ISO-type actuator mounting design • Pneumatic and electric actuation options • 100% factory tested

Applications:

• Process Lines• Lubrication Systems• Wash Down Systems• Steam Lines

Brand PARKER

MB Series Ball Valve

Description

Parker's MB Series ball valves, with their barstock, compact design, offerpositive shut off or directional control of fluids in process, power andinstrumentation applications. The unique one piece seat/packing designinsures excellent sealing characteristics while accommodating a superiortemperature range (-65⁰F to 300⁰F), up to 3000 PSIG and long cycle life.

These valves are available in two-way and three-way configurations,brass and stainless steel construction, with a wide variety of portconnections. Also, all ports are suitable as inlets to full operating pressureof the valve.

Markets:

• Oil and Gas• Research• Chemical• Microelectronics

Features/Benefits:

• One piece seat/packing design• Broad temperature range • Coated metal inserts • One piece stem/ball • Wide variety of US Customary and SI ports • Panel mountable to 1/4"" thickness• Bi-directional flow • Handle indicates direction of flow • Full operating pressure at any port• Positive handle stops• Color coded handles • 100% factory tested • Vent option • Manual, electric or pneumatic actuation • Leak-tight center-off position on three-way valves

Applications:

• Sample Extraction/Dispensing Systems in Labs• Control Panels• R&D Labs• Specialty Gas• Chemical delivery• Pilot Plants

2 of 12

Brand PARKER

PR Series Rotary Plug Valve

Description

Parker’s PR Series Plug Valves provide positive leak tight shut-off, highflow capacity, and quick quarter-turn operation in a compact attractivepackage. The patented blow-out resistant seat design offers reliablesealing technology at all operating pressures not seen in general purposeplug valves. In addition to on-off actuation, the plug design allows forwardflow throttling.

A broad selection of valve seats and seal materials may be chosen formedia compatibility and performance over a broad range of temperatures.The pressure balanced atmospheric seals are backed by PTFE rings toenhance their performance and increase cycle life.

Markets:• Oil and Gas• Research• Chemical• University LabsFeatures/Benefits:• Patented blow-out resistant seat design• Pressures up to 3,000 psig (207 bar) CWP • Quarter-turn operation• Reliable simple design• Straight-through flow• Stainless steel and brass construction• Nitrile, ethylene propylene, fluorocarbon, and highly fluorinatedfluorocarbon rubber seats and seals • PTFE back-up rings on atmospheric seals • Low operating torque • Minimum pressure drop• Throttling capability• Positive handle stops• Color coded fracture resistant nylon handles with directional flowindication • Easy to service• 100% factory tested • Options include lock-out devices, downstream venting, and bothstainless steel and T-bar handles

Applications:• Control Panels• R&D Labs• Specialty Gas Systems• Chemical delivery• Fill stations

3 of 12

Brand PARKER

Three Way B Series Ball Valve

Description

Parker manually, pneumatically, and electrically actuated three-way BSeries Ball Valves may be used as diverting or selecting valves for fluidsutilized in process and instrumentation applications.

The standard three-way diverter valve is designed to accept mediathrough the bottom port and direct it out of two outlet ports. Whenequipped with spring-loaded seats, the three-way valve may be used as aselector valve, alternately accepting media from either of two inlet sources(side ports) and directing it through a single outlet (bottom port).

Features:

Available in 316 stainless steel and brass construction. Monel Alloy 400 and Hastelloy C-276 construction available for DiverterValves upon request. Micro-finished ball provides a positive seal. Wide variety of US Customary and SI ports.180 degree actuation. Panel mountable. Adjustable PTFE stem seal can be maintained in-line. Handle indicates flow direction. Low operating torques. Positive handle stops. Color coded handles. Optional pneumatic and electric actuation. Optional live-loaded PTFE stem seals. Optional non-adjustable O-ring stem seals. Optional stainless steel and extended handles.

Brand PARKER

Ball Valves

4 of 12

Brand PARKER

B12 Series Ball Valve

Description

Parker's B12 Series Ball Valves are available to operate manually orpneumatically for large ¾” and 1” tubing systems.. They provide quick on-off control of fluids utilized in process and instrumentation applications.

The “free floating ball” design provides excellent seat wear compensationduring cycling and creates an effective seal on the downstream side. Thislarge ball valve works up to 4,000 PSI and temperatures up to 350F/177C.

Markets:

• Chemical Plants • Refineries • Power Plants • Petrochemical Plants

Features/Benefits:

• Blow-out resistant stem• Spring-loaded ball seats• Bi-directional flow • Stainless steel construction• Micro-finished ball provides a positive seal• Handle indicates flow direction• Color coded handles• Low operating torques• Optional pneumatic actuation • 100% factory tested

Applications:

• Flow Diversion• Flow Selection• Quick Fill Systems in Large Tubing Systems• Instrument Panels

Brand PARKER

PV Series Rising Stem Plug Valves

Description

Parker Rising Stem Plug Valves and Gauge/Root valves are ruggedvalves manufactured from stainless steel barstock. They are screwedbonnet designs featuring bonnet lock plates.

The valves are suitable for service up to 6,000 psig (41.3 MPa) CWP and400 °F (204 °C). These valves offer a straight-through flow design in twoorifice sizes. The PV Series of valves utilize a non-rotating lower stem inconjunction with a tapered seat for positive shut-off and long seat life,even in particulated media.

The materials of construction and choice of seat and stem seal materialsprovides a variety of application possibilities, including ASME B31.1Power Piping.

With gauge ports, the valve offers a means to install differential pressuretransmitters, pressure switches, and gauges. They are particularly usefulin block-and-bleed applications.

A variety of US Customary and SI port connections, including CPI™ andA-LOK® compression, and female and male NPT are available.

5 of 12

Brand PARKER

SN6 Series Needle Valve

Description

Parker’s SN6 Series Needle Valves provide shut-off and coarse regulationof liquids and gases up to 6,000 PSI (414 BAR). These compact, ruggedvalves are manufactured from 316 stainless steel bar stock and areintegral bonnet designs with packing above the stem threads. The SN6valve offers the installer the ability to place this valve in environmentsfrom 350?F with PTFE or up to critical environments up to 700?F withGrafoil® packing while still in the same small, compact design. Othersimilar valves do not offer that application flexibility.

Markets:• Petrochemical• Chemical• General Industry• Power

Features/Benefits:

• Integral bonnet design• 316 stainless steel construction• Choice of two stem types:R-Stem – All metal, blunt stem tipK-Stem – PCTFE stem tip• Choice of PTFE or Grafoil® packing• Inline and angle patterns• 100% factory tested

Applications:• Sample Cylinders• Control Panels

Brand PARKER

NP6 Series Needle Valve

Description

Parker’s NP6 Needle Valves are severe service, needle valves. They aredesigned with the packing below the stem threads and a two-piece stemfor critical systems up to 6,000 PSI (414 BAR). The packing below thethreads protects the flow stream from thread lubricant contamination orwashout and also protects the stem threads from potential damagingeffects of the media. The two-piece stem produces a non-rotating lowerstem for superior, repeatable sealing and reduced packing wear.

Markets:• Chemical• Petrochemical• Oil and Gas• Power

Features/Benefits:• Packing below power threads protects thread lubricants from media andisolates the media from the lubricant for severe service applications• O-ring dust seal in bonnet protects stem threads from external

6 of 12

contamination• Choice of two non-rotating stem types: R-Stem – All metal, blunt stemtip, K-Stem – PCTFE stem tip• Non rotating lower stem extends packing and valve life• 316 stainless steel construction• Inline and angle patterns• Wide variety of US Customary and SI ports• Panel mountable• 100% factory tested• Optional color coded handles

Applications:• Solvent Systems• Critical Shut – Off Systems

Brand PARKER

VQ Series Toggle Valves

Description

Parker’s VQ Series Toggle Valves are the right combination ofperformance and value for manual or pneumatic on-off control inmoderate pressure and temperature applications. The manual versionemploys a toggle handle for quick action at pressures up to 300 psig (21bar). Compact double acting, normally closed, and normally openpneumatically actuated versions of this valve are ideal for automaticcontrol at pressures up to 600 psig (41 bar).

Markets:• Research• Oil and Gas• Chemical• Petrochemical

Features/Benefits:• Quick acting• Inline and angle patterns• Available with CPI™, A-LOK®, male and female NPT end connections• Panel mountable• Color-coded handles• 316 stainless steel and brass body construction• Stem seal materials: Fluorocarbon Rubber Nitrile Rubber Ethylene Propylene Rubber• Highly Fluorinated Fluorocarbon Rubber• Optional handle positioners and anti-lock handles• 100% factory tested• Available in normally open, normally closed, and double acting models• Mounting bracket standard for actuated models

Applications:• Test Panels• Purge Systems• Rapid Fill Systems

Brand PARKER

U Series Needle Valve

Description

Parker's U Series Union Bonnet valves are engineered for use at

7 of 12

pressures up to 6,000 (414 bar) and temperatures as high as 1,200°F(649°C). The heavy duty design has a non-rotating lower stem that helpsto extend packing life by removing stem rotation through the packing area.Stem packing below the threads isolates the thread lubricant from theflow, ensuring adequate lubrication regardless of the media.

Markets: • Power• Nuclear Plants• Oil and Gas• Chemical / Petro-ChemicalFeatures/Benefits:• Union bonnet design ensures high integrity seal under severe serviceapplications• Packing below the power threads protects thread lubricants from mediaand isolates the lubricants from the media• Dust seal in the packing nut protects stem threads from externalcontamination• Stem swivel above the packing eliminates entrapment area andincreases packing life• Choice of Grafoil® or PTFE packing• Choice of Regulating or Blunt stem types. Blunt stem type helps combatwire draw which may occur when two phase flow is present (i.e. steamservice)• 316 stainless steel construction• Wide variety of US Customary and SI ports• Panel mountable• 100% factory tested

Applications:• Steam Blow Down Service• Process Control Lines• High Temperature Sampling Lines

Brand PARKER

V8 Series Needle Valve

Description

Parker's V Series Needle Valves are designed for positive, leak tight shut-off and regulation of fluids in process, power, and instrumentationapplications. These inline and angle pattern valves come with a widevariety of port sizes and styles, temperature capabilities ranging from -65°F to 450°F (-54°C to 232°C) and pressures to 5000 psig (345 bar) ).V Series Needle Valves provide the utmost in flexibility when designinginstrumentation tubing or piping systems.

Markets:

• Pulp and Paper• Chemical• Oil and Gas• Power• Laboratories

Features/Benefits:

• Choice of three stem types: R-Stem – All metal, blunt stem tip N-Stem – All metal, tapered needle stem tip K-Stem – PCTFE stem tip• Differential hardness between the strain hardened stem and cold formedbody threads provides improved cycle life• Choice of PTFE packing or elastomeric O-ring stem seals• 316 Stainless Steel, Steel, Brass’ and Monel® ,Alloy 400 construction• Inline and angle patterns• Wide variety of US Customary and SI ports

8 of 12

• Panel mountable• 100% factory tested• Optional color coded handles

Applications:

• Process System Control and Shut Off• Sampling Bottles• Instrument Air• Control Panels

Brand PARKER

V6 Series Needle Valve

Description

Parker's V Series Needle Valves are designed for positive, leak tight shut-off and regulation of fluids in process, power, and instrumentationapplications. These inline and angle pattern valves come with a widevariety of port sizes and styles, temperature capabilities ranging from -65°F to 450°F (-54°C to 232°C) and pressures to 5000 psig (345 bar) ).V Series Needle Valves provide the utmost in flexibility when designinginstrumentation tubing or piping systems.

Markets:

• Pulp and Paper• Chemical• Oil and Gas• Power• Laboratories

Features/Benefits:

• Choice of three stem types: R-Stem – All metal, blunt stem tip N-Stem – All metal, tapered needle stem tip K-Stem – PCTFE stem tip• Differential hardness between the strain hardened stem and cold formedbody threads provides improved cycle life• Choice of PTFE packing or elastomeric O-ring stem seals• 316 Stainless Steel, Steel, Brass’ and Monel® ,Alloy 400 construction• Inline and angle patterns• Wide variety of US Customary and SI ports• Panel mountable• 100% factory tested• Optional color coded handles

Applications:

• Process System Control and Shut Off• Sampling Bottles• Instrument Air• Control Panels

9 of 12

Brand PARKER

V4 Series Needle Valve

Description

Parker's V Series Needle Valves are designed for positive, leak tight shut-off and regulation of fluids in process, power, and instrumentationapplications. These inline and angle pattern valves come with a widevariety of port sizes and styles, temperature capabilities ranging from -65°F to 450°F (-54°C to 232°C) and pressures to 5000 psig (345 bar) ).V Series Needle Valves provide the utmost in flexibility when designinginstrumentation tubing or piping systems.

Markets:

• Pulp and Paper• Chemical• Oil and Gas• Power• Laboratories

Features/Benefits:

• Choice of three stem types: R-Stem – All metal, blunt stem tip N-Stem – All metal, tapered needle stem tip K-Stem – PCTFE stem tip• Differential hardness between the strain hardened stem and cold formedbody threads provides improved cycle life• Choice of PTFE packing or elastomeric O-ring stem seals• 316 Stainless Steel, Steel, Brass’ and Monel® ,Alloy 400 construction• Inline and angle patterns• Wide variety of US Customary and SI ports• Panel mountable• 100% factory tested• Optional color coded handles

Applications:

• Process System Control and Shut Off• Sampling Bottles• Instrument Air• Control Panels

Brand PARKER

V2 Series Needle Valve

Description

Parker's V Series Needle Valves are designed for positive, leak tight shut-off and regulation of fluids in process, power, and instrumentationapplications. These inline and angle pattern valves come with a widevariety of port sizes and styles, temperature capabilities ranging from -65°F to 450°F (-54°C to 232°C) and pressures to 5000 psig (345 bar) ).V Series Needle Valves provide the utmost in flexibility when designinginstrumentation tubing or piping systems.

Markets:

• Pulp and Paper• Chemical• Oil and Gas• Power• Laboratories

10 of 12

Features/Benefits:

• Choice of three stem types: R-Stem – All metal, blunt stem tip N-Stem – All metal, tapered needle stem tip K-Stem – PCTFE stem tip• Differential hardness between the strain hardened stem and cold formedbody threads provides improved cycle life• Choice of PTFE packing or elastomeric O-ring stem seals• 316 Stainless Steel, Steel, Brass’ and Monel® ,Alloy 400 construction• Inline and angle patterns• Wide variety of US Customary and SI ports• Panel mountable• 100% factory tested• Optional color coded handles

Applications:

• Process System Control and Shut Off• Sampling Bottles• Instrument Air• Control Panels

Brand PARKER

V12 Series Needle Valve

Description

Parker's V Series Needle Valves are designed for positive, leak tight shut-off and regulation of fluids in process, power, and instrumentationapplications. These inline and angle pattern valves come with a widevariety of port sizes and styles, temperature capabilities ranging from -65°F to 450°F (-54°C to 232°C) and pressures to 5000 psig (345 bar) ).V Series Needle Valves provide the utmost in flexibility when designinginstrumentation tubing or piping systems.

Markets:

• Pulp and Paper• Chemical• Oil and Gas• Power• Laboratories

Features/Benefits:

• Choice of three stem types: R-Stem – All metal, blunt stem tip N-Stem – All metal, tapered needle stem tip K-Stem – PCTFE stem tip• Differential hardness between the strain hardened stem and cold formedbody threads provides improved cycle life• Choice of PTFE packing or elastomeric O-ring stem seals• 316 Stainless Steel, Steel, Brass’ and Monel® ,Alloy 400 construction• Inline and angle patterns• Wide variety of US Customary and SI ports• Panel mountable• 100% factory tested• Optional color coded handles

Applications:

• Process System Control and Shut Off• Sampling Bottles• Instrument Air• Control Panels

11 of 12

Tel 04-646 6766Fax 04-646 8366E-Mail hing@targetec.com.myWebsite www.targetecengineering.com

Targetec Engineering Sdn. Bhd.

No. 17, Persiaran Mahsuri 5, Taman Melati Jaya, Sungai Nibong Kecil, 11900,Bayan Lepas, Pulau Pinang, Malaysia

12 of 12