Pneumatic clamping device SVP The pneumatic clamping device SVP is screw-mounted in front of the workbench. The pneumatic clamping cylinder is powered by compressed air or nitrogen. The clamping pressure can be checked via manometer and continuously adjusted by pressure reducer. For safety reasons, the clamping device is closed using two-hand operation. 1 2 3 4 5 6 7 Pneumatic clamping device SVP. Pneumatic clamping device SVPS. CONTINUOUSLY ADJUSTABLE CONTACT PRESSURE TWO HAND TRIPPING DEVICE ROBUST MECHANICAL HEIGHT ADJUSTMENT T E C H N I C A L D A T A Subject to technical modifications / 03-2020 SVP (EN ISO 12100-1, EN ISO 12100-2, EN 60204) Inlet pressure: max. 10 bar. Operating pressure clamping cylinder: max. 6 bar. Dimensions: Height [mm]: 570, Width [mm]: 680, Depth [mm]: 380. Weight [kg]: 18. Surface: hot-dip galva- nized, powder coated. SVPS (EN ISO 12100-1, EN ISO 12100-2) Inlet pressure: max. 10 bar. Operating pressure clamping cylinder: max. 6 bar. Dimensions: Height [mm]: 620, Width [mm]: 680, Depth [mm]: 380. Nitrogen filling pressure: 15 bar. Safety valve: 18 bar. Nitrogen supply hose: 1.2 m. Weight [kg]: 19. Surface: zinc plated, powder coated. Art. No. 186521 STRENGTHS AT A GLANCE Art.-No. 186511 Pneumatic clamping device SVP. Art. No. 186511 Art.-No. 186801 1 1 Art.-No. 187861 1 5 Art.-No. 186806 1 2 Art.-Nr. 187141 1 9 Art.-No. 186862 1 6 Art.-No. 186857 1 3 Art.-No. 186807 1 7 Art.-No. 186858 1 4 Pressure reducer nitrogen, 0 - 20 bar Filling connection, screw-on Valve charger Hand filling nozzle M12 x 1,5 Hand filling nozzle M14 x 1,5 Hand filling nozzle M16 x 1,5 Universal filling clamp Accessories for SVP and SVPS (surcharge) To adjust to the different fire extinguisher dimensions, the fixed stop has a mechanical coarse adjustment, and the support table for 2 - 12 kg fire extinguishers is height adjustable. Page 108 | Accessories and tools Other hand filling nozzles available for different screw thread types upon request. (Specify make of fire extinguisher) Pneumatic clamping device SVPS with nitrogen filling unit The pneumatic clamping device SVPS works just like the SVP described opposite. But it is additionally equipped with a nitrogen filling unit. The pressure hose is connected to the pressure reducer (accessory) of a Pneumatic clamping device SVPS with nitrogen filling unit. nitrogen cylinder. The nitrogen pressure is present up to the ball valve. The test pressure gauge indicates the pressure whilst being a monitor for the filling process at the same time. Opening the ball valve fills the clamped stored pressure extinguisher via a coiled hose with quick action coupling and a filling connection (accessory). A certified safety valve safeguards the filling process. Clamping devices SVP and SVPS

SVP · 2020. 11. 3. · 31 Art.-No. 186857 71 Art.-No. 186807 41 Art.-No. 186858 1 Pressure reducer nitrogen, 0 - 20 bar Filling connection, screw-on Valve charger Hand filling nozzle

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: SVP · 2020. 11. 3. · 31 Art.-No. 186857 71 Art.-No. 186807 41 Art.-No. 186858 1 Pressure reducer nitrogen, 0 - 20 bar Filling connection, screw-on Valve charger Hand filling nozzle

Pneumatic clamping device SVP

The pneumatic clamping device SVP is screw-mounted in front of the workbench. The pneumatic clamping cylinder is powered by compressed air or nitrogen. The clamping pressure can be checked via manometer and continuously adjusted by pressure reducer. For safety reasons, the clamping device is closed using two-hand operation.

1 2 3 4 5 6 7

Pneumatic clamping device SVP. Pneumatic clamping device SVPS.

CONTINUOUSLY ADJUSTABLE CONTACT PRESSURE TWO HAND TRIPPING DEVICE ROBUST MECHANICAL HEIGHT ADJUSTMENT

Subject to technical modifications / 03-2020

SVP(EN ISO 12100-1, EN ISO 12100-2, EN 60204)

Inlet pressure: max. 10 bar. Operating pressu-re clamping cylinder: max. 6 bar. Dimensions: Height [mm]: 570, Width [mm]: 680, Depth [mm]: 380. Weight [kg]: 18. Surface: hot-dip galva-nized, powder coated.

SVPS(EN ISO 12100-1, EN ISO 12100-2)

Inlet pressure: max. 10 bar. Operating pressu-re clamping cylinder: max. 6 bar. Dimensions: Height [mm]: 620, Width [mm]: 680, Depth [mm]: 380. Nitrogen filling pressure: 15 bar. Safety valve: 18 bar. Nitrogen supply hose: 1.2 m.Weight [kg]: 19. Surface: zinc plated, powder coated.

Art. No. 186521

STRENGTHS AT A GLANCE

Art.-No. 186511 Pneumatic clamping device SVP.

Art. No. 186511

Art.-No. 18680111

Art.-Nr. 186069113

Art.-No. 18786115

Art.-No. 18680612

Art.-Nr. 18714119

Art.-No. 18686216

Art.-No. 18685713

Art.-No. 18680717

Art.-No. 18685814

Pressure reducer nitrogen, 0 - 20 barFilling connection, screw-onValve chargerHand filling nozzle M12 x 1,5Hand filling nozzle M14 x 1,5Hand filling nozzle M16 x 1,5Universal filling clamp

Accessories for SVP and SVPS (surcharge) To adjust to the different fire extinguisher dimensions, the fixed stop has a mechanical coarse adjustment, and the support table for 2 - 12 kg fire extinguishers is height adjustable.

Page 108 | Accessories and tools

Other hand filling nozzles available for different screw thread types upon request.(Specify make of fire extinguisher)

Pneumatic clamping device SVPS with nitrogen filling unit

The pneumatic clamping device SVPS works just like the SVP described opposite. But it is additionally equipped with a nitrogen filling unit. The pressure hose is connected to the pressure reducer (accessory) of a

Pneumatic clamping device SVPS with nitrogen filling unit.

nitrogen cylinder. The nitrogen pressure is present up to the ball valve. The test pressure gauge indicates the pressure whilst being a monitor for the filling pro-cess at the same time. Opening the ball valve fills the clamped stored pressure extinguisher via a coiled hose with quick action coupling and a filling connection (accessory). A certified safety valve safeguards the filling process.

Clamping devicesSVP and SVPS