Upload
luciano-serra
View
46
Download
6
Embed Size (px)
DESCRIPTION
suzuki marine
Citation preview
SPECIFICATIONS K5
Item UnitData
DT9.9 DT15
PRE-FIX 00993 01501
DT9.9/DT15
DIMENSIONS & WEIGHT
PERFORMANCE
POWERHEAD
Overall length (front to back) mm (in) 815 (32.1)Overall width (side to side) mm (in) 455 (17.9)Overall height S mm (in) 1050 (41.3)
L mm (in) 1180 (46.5)UL mm (in) 1305 (51.4)
Weight S kg (lbs) 37.0 (81.6)L kg (lbs) 38.0 (83.8)
UL kg (lbs) 39.0 (86.0)Transom height [Trim position: 3]
Smm
(inch type)427 (15)
Lmm
(inch type)554 (20)
ULmm
(inch type)681 (25)
Maximum output kW (PS) 7.3 (9.9) 11.0 (15)Recommended operating range r/min 4500 – 5500 4800 – 5600Idle speed r/min 950 ± 50 (in-gear: approx. 750)
Engine type 2-strokeNumber of cylinders 2Bore mm (in) 59.0 (2.32)Stroke mm (in) 52.0 (2.05)Total displacement cm3 (cu in) 284 (17.3)Compression ratio : 1 6.8Standard spark plug NGK BR7HS-10 (For E01)
NGK B7HS-10 (For E13, E40)Intake system Reed valveExhaust system Through prop exhaustCooling system Water cooledStarting system ManualChoke system ManualIgnition system SUZUKI PEIThrottle control Twist grip
1/2
Item UnitData
DT9.9 DT15
FUEL & OIL
BRACKET
LOWER UNIT
Fuel Suzuki highly recommends that you use alcohol-free unleaded gasoline with a minimum pump octane rating of 87 ((R + M)/2 method) or 91 (Research method). However, blends of unleaded gasoline and alcohol with equivalent octane content may be used.
Mixing ratio Premixture of gasoline and oil at 100:1 (For South Africa and commercial markets, use a pre-mixture of gasoline and oil at 50:1)
Fuel tank capacity L (US/Imp. gal)
25 (6.6/5.5)
Engine oil SUZUKI CCI OIL, SUZUKI Outboard Motor Oil or NMMA (National Marine Manufactures Association) certified TC-W3TM oil.
Gear oil SUZUKI Outboard Motor Gear Oil (SAE #90 hypoid gear oil)
Gearcase oil amounts ml (US/Imp. oz)
170 (5.7/6.0)
Trim angle Degrees 4.0 – 20.0Number of trim positions 5Maximum tilt angle Degrees 73
Reversing system GearTransmission Forward-Neutral-ReverseReduction system Bevel gearGear ratio 12 : 23 (1.917)Drive line impact protection Spline drive rubber hubPropeller Blade × Diam. (in) × Pitch (in)
3 × 9-1/4 × 7 (M701)3 × 9-1/4 × 8 (M801)3 × 9-1/4 × 9 (M901)
3 × 9-1/4 × 10 (M1001)3 × 9-1/4 × 11 (M1101)
Thick type3 × 9-1/4 × 8 (M811)3 × 9-1/4 × 9 (M911)
3 × 9-1/4 × 10 (M1011)
2/2