Suspended Concrete Floor Slab Formwork System

Suspended concrete slab formwork - moladi In-situ floor Suspended slab formwork

system

moladi designer of a unique patented plastic formwork system has recently design a new

Suspended slab formwork system for casting reinforced Suspended concrete slabs -

Floor slabs to enable the construction of multi-level structures to be built faster better

stronger for less. This requires formwork technology to be able to carry the dead loads

and impact when casting slabs in-situ

The photo below depicts the completed suspended concrete roof slab

The 20 square meter slab was constructed with 2 cubic meters of 25 mpa concrete and

100 kg of steel

The cost for the slab is drastically reduced because of the formwork configuration that

allows for multiple permutations as can be seen below – Less than the cost associated

with rib and block precast system

The moladi Slab System allows for beams to be increased or decreased in numbers,

thickness, depth and width allowing for 100 % optimization - and most importantly only

one prop per room 9depending on size) for early stripping/removing of formwork

moladi slab formwork system

For more information visit our website - www.moladi.net

Tags: - Slab, beams, bearing, building, buildings, concrete, decking, double, floor,

formwork, load, loads, moladi, multistorey, multilevel, propping props, slab, span, story

system, system, plastic formwork, concrete slab, suspended concrete slabs, concrete

formwork, concrete slab formwork, suspended concrete slab formwork, moladi, plastic

shutter system, concrete, Alternative Building Technologies, concrete roof slab system,

precast concrete slabs, concrete roof slab, Rib and Block, slabs, Lattice Beam, Girder,

rebar, polystyrene