SURPLUS CNC & MANUAL MACHINERY NO LONGER … · · 2017-07-31MAZAK M-5B 24" X 82" M-5N CNC FLAT BED LATHE ... CONTROLLED AUTOMATION 2AT-175 175 TON CNC PLATE PUNCH 2002 (CTRL) 2007

Turn

ing Your Assets into Dollars

Online AuctionSURPLUS

EQUIPMENTEVERYTHING

MUST SELL!

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]

European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH

Tel / Fax [email protected]

SURPLUS CNC & MANUAL MACHINERY NO LONGER NEEDED IN THE CONTINUING OPERATIONS OF

MAJOR MANUFACTURERSCNC & MANUAL MACHINERY

BIDDING CLOSES TUESDAY, AUGUST 8TH @ 1:00 P.M. EDTInspection: CALL (888) 800-4442 FOR APPOINTMENT

GIDDINGS & LEWIS G60-FX 6" CNC FLOOR TYPE HORIZONTAL BORING MILL

MAZAK M-5B 24" X 82" M-5N CNC FLAT BED LATHE

POREBA 53" X 236" MANUAL ENGINE LATHE

CONTROLLED AUTOMATION 2AT-175 175 TON CNC PLATE PUNCH

2002(CTRL)

2007

MACHINERY INSPECTION DATE & TIME – CALL (888) 800-4442 FOR APPOINTMENT

2

GIDDINGS & LEWIS G60-FX 6" CNC FLOOR TYPE HORIZONTAL BORING MILL

GIDDINGS & LEWIS 70A-DP4-T 4" MANUAL TABLE TYPE HORIZONTAL BORING MILL

2002(CTRL)

ONLINE AUCTION SALE DATE & TIME – BIDDING CLOSES TUESDAY, AUGUST 8TH @ 1:00 P.M. EDT

3

DEVLIEG STACK-UP ANGLE PLATE

WOTAN 67" X 60" MOTORIZED INFEEDING ROTARY TABLE GIDDINGS & LEWIS G60 FCXS RIGHT ANGLE HEAD MOUNT

SELLERS TRAVELING OUTBOARD TAILSTOCK SUPPORT

CNC & MANUAL HORIZONTAL BORING MILLS

GIDDINGS & LEWIS Model G60-FX 6” CNC Floor Type Horizontal Boring Mill with (2) 48” x 72” Tables, 288” X-Axis, 108” Y-Axis, 48” Z-Axis Travel, #50 Taper Spindle Speeds 25-1120 RPM, 40 HP, Power Draw Bar, Hardened Runways, G&L 8000M CNC Control (New 2002), mfg.1980, sn:455-17-80 (#1621) Located: Lester, PA

GIDDINGS & LEWIS Model 70A-DP4-T 4” Manual Table Type Horizontal Boring Mill with 36” x 74” Table, 72” X-Axis, 60” Y-Axis, 55” Z-Axis Travel, #50 Taper Spindle Speeds 10-1300 RPM, Soft Vertical Ways, Missing:Machine Crank Handle & Floor Mounted Table Outriggers, sn:150-917 (#1790) Located: York, PA

HORIZONTAL BORING MILL ACCESSORIES, TAILSTOCKS,

ANGLE PLATESWOTAN 67” x 60” Motorized Infeeding Rotary Table with 67” x 60” Table, 39.37” Table Infeed, 31.5” Table Height, Pendant Control, Power Clamping, 4 Position Shot Pin, Manual Lighted Scale (#1725) Located: Lester, PA

GIDDINGS & LEWIS Model G60 FCXS Right Angle Head Mount, was used on a 6" G&L Floor Type Horizontal Boring Mill Model G60-FCXS, Has a Latch Plate Type Mounting Pins, Cam Lock Pins are Removable, Adapter Only, No Head, mfg.1988 (#1864) Located: Lester, PA

SELLERS Traveling Outboard Tailstock Support with 96” Vertical Travel of Bearing Support, 8” Hole Diameter, 6” Width Way Surface Bed, 35” Overall Width of Way Surface, Power Vertical & Horizontal Travel, Removed from 8” Ingersoll Floor Type Boring Mill, Motor & Gear Missing on Horizontal Travel, Small Crack in Saddle (#1637) Located: Lester, PA

GRAY Outbound Tailstock Support with 84” Vertical Travel of Bearing Support, 36” Travel on Runway, 7” Hole Diameter in Bushing, 7” Width Way Surface, 30” Overall Width of Way Surface, Power Vertical & Horizontal Travel, Manual Scales, mfg.1968 (#1641) Located: Lester, PA

50 Taper Boring Bars, 151” Long x 6” Boring Bar (#1645) Located: Lester, PA

DEVLIEG Stack-Up Angle Plate 20-1/2” x 40” x 21” Stacked Dimensions, 20-1/2” x 21” x 20” Bottom Angle, 20-1/2” x 19” Top Angle (#2087) Located: Charlotte, NC

GRAY OUTBOARD TAILSTOCK SUPPORT

50 TAPER BORING BARS


4

VERTICAL BORING MILLKING Hi-Column Vertical Boring Mill with 52” 4-Jaw Table, 66’ Max. Swing, 72” Height Under Rail, 2.7-100 RPM Variable Table Speeds, 75 HP, Right Hand Swivel, Turret, Side Head, Retrofit to DC Drive by KING, 2013 Up-fit, sn:20112 (#1727) Located: Houston, TX

MANUAL ENGINE LATHES

POREBA 53” x 236” Manual Engine Lathe Model TR135 B1 x 6M with 53.14” Swing Over Bedways, 40.15” Swing Over Cross Slide, 236.22” Distance Between Centers, 18 Spindle Speeds 5-500 RPM, Hardened Bedways, Inch / Metric Threading, Taper Attachment, 6-Way Power Rapid Traverse, 31.5” 4-Jaw Chuck, 39” 3-Jaw Chuck, Tailstock, Steady Rests, mfg.1980 (#1877) Located: Lester, PA

TOS 24” x 130” Manual Engine Lathe Model SUS-63 with 24” Swing over Bedways, 14” Swing Over Cross Slide, 130” Distance Between Centers, 3” Spindle Bore, Inch / Metric Threading, 18” 4-Jaw Chuck, Steady & Follow Rests, 4-Way Toolpost, sn: 04 53975, mfg. 1995 (#1967) Located: Santa Barbara, CA

KING HI-COLUMN VERTICAL BORING MILL

POREBA TR135 B1 X 6M 53" X 236" MANUAL ENGINE LATHE

TOS SUS-63 24" X 130" MANUAL ENGINE LATHE

UPFIT2013


5

MONARCH 40/25 48" X 156" CNC FLAT BED LATHE

MAZAK M-5B 24" X 82" M-5N CNC FLAT BED LATHE

HAAS SL-20T CNC TURNING CENTER

CNC FLAT BED LATHESMONARCH 48” x 156” CNC Flat Bed Lathe Model 40/25 with 48” Swing Over Bed, 33.5” Swing Over Cross Slide, 156” Between Centers, 4.12” Hole Through Spindle, 50 HP, 6 Position Indexable Turret, 2-7000 RPM, 24" Chuck with 10.5" Hole, 36" Chuck with 6" Hole, (2) Steady Rests 28" and 20", Tooling, Extra Turret Base, FAGOR 8055 CNC Pendant Controls (2006), sn:50287 (#1806) Located: Indian Trail, NC

MAZAK Model M-5B 24” x 82” M-5N CNC Flat Bed Lathe with 22.05” X-Axis, 80.91” Z-Axis, 24.02” Max. Swing, 22.83” Max. Machining Diameter, 81.89” Max. Machining Length, 4.09” Spindle Bore, 20.75" Kitagawa 3-Jaw Chuck with 5.5"Hole, 8-Position Front Vertical Turret, 6-Position Rear Horizontal Turret, Steady Rest, Programmable Tailstock, Live Center, Jorgensen Chip Conveyor, Electric Foot Switch, Tooling, MAZATROL 640T CNC Control, Low Hours, sn:195906, mfg.2007 (#1915) Located: Lester, PA

CNC TURNING CENTERS(2) MIGHTY VIPER Model VT-25BL CNC Turning Centers with 20.4” Swing x 48” Between Centers, 41” Maximum Turning Length, Capacity to 10” Chucks, Spindle Speeds to 4000 RPM, 12 Station Turrets, Tool Presetter & Chip Conveyors, FANUC Series Oi-TD CNC Controls, sn:9331106011, mfg.8/2011 ● sn:6331107011, mfg.9/2011 ● sn:9330909011, mfg.8/2011 ● sn:6331107012, mfg.9/2011 (#1920, 1921) Located: Indian Trail, NC

HAAS Model SL-20T CNC Turning Center with 9.3” X-Axis, 21” Z-Axis Travel, 3.5” Spindle Bore, 2” Bar Capacity, 15” Max. Cutting Diameter, 21” Max. Cutting Length, Spindle Speeds to 4000 RPM, 20 HP, A2-6 Spindle Nose, 20.75” Swing Over Cross Slide, Tailstock, 12 Position Turret, Sludge Tank, Chip Auger, HAAS CNC Control, sn:62954, mfg.2000 (#2125) Located: Indian Trail, NC

HAAS SL-20 CNC Turning Center with 9.3” X-Axis, 21” Z-Axis Travel, 3.5” Spindle Bore, 2” Bar Capacity, 15” Max. Cutting Diameter, 21” Max. Cutting Length, Spindle Speeds to 4000 RPM, 20 HP, A2-6 Spindle Nose, 20.75” Swing Over Cross Slide, 12 Position Turret, Sludge Tank, Chip Auger, HAAS CNC Control, sn:62954, mfg.1999 (#2126) Located: Indian Trail, NC

CONTINUTED ON PAGE 6

HAAS SL-20 CNC TURNING CVENTER

2007

2000

2006(CTRL)


6

(2) MIGHTY VIPER VT-25BL CNC TURNING CENTERS

2011

PRESS BRAKESAMADA Model 5020 55 Ton CNC Up-Acting Hydraulic Press Brake with 79” Overall Bending Length, 66.5” Distance Between Housings, 15.75” Throat Depth, 3.9” Stroke Length, 5 HP, Operator 2-Axis CNC Control, Electric Foot Switch Controls, (8) Upper Tool Clamps, sn:ITS25020B50712, mfg.1995 (#1803) Located: Lester, PA

PACIFIC Model 200-14 200 Ton Hydraulic Press Brake with 14’ Overall Bed Length, 12’ 6” Distance Between Housings, Cylinders & Electrics Updated 2016, Palm Buttons, Remote Foot Pedal Actuator, sn:2486 (#2124) Located: Seattle, WA

AMADA 5020 55 TON CNC UP-ACTING HYDRAULIC PRESS BRAKE

PACIFIC 200-14 200 TON HYDRAULIC PRESS BRAKE

2 AVAIL.

Want to Join Our Mailing List? Want to be Included in Email Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure? Email Us at [email protected] or Fax a Request to (704) 821-4325!


7

BURNING MACHINEKOIKE ARONSON Model MYNUC400D 8’ 8” x 43’ Plasma Cutting Machine with 104” Max. Cutting Width, 516” Max. Cutting Length, 672” Total Rail Length, 360° Bevel Head Rotation, 3-D Link Plasma Contour Bevel Station (Added 2006), Kaliburn Proline 2260 275 AMP Plasma Cutting System, Digital Height Control, Synchronized Dual Side Rack & Pinion Drive System, Down Draft Table with Dust Collector, 460 Volts/3/60, FANUC 15M CNC Control, sn:M2796, mfg.1996 (#1588) Located: Lester, PA

PLATE PUNCH & PLASMA PUNCH

CONTROLLED AUTOMATION Model 2AT-175 175 Ton CNC Plate Punch with 30” Throat Depth, 30” x 60” Plate Size, 2-5/16” Hole Size, 2” Punch Stroke, Hydraulic Punch Stripping, Programmable Repositioning, Programmable Layout Option, Assortment of Punch and Dies, IBM Compatible CNC Control, sn:97-71, mfg.1996 (#1801) Located: Lester, PA

PEDDINGHAUS Model FPB1500-3E 177 Ton CNC Plate Punch with Plasma Cutting Torch with 60” Max. Plate Width, 1-1/4” Plate Thickness, 850 IPM Feed Rate, 2.25” Punch Stroke Length, Triple Gag Punch Head, Hypertherm HT2000 200 Amp Plasma Cutting Unit, Slug Vacuum Removal System, 20' Power In Feed Conveyor (60" Wide), 10' Idler Roll Exit Conveyor (60" Wide), Torit Downflow 8-Cartridge Dust Collector, FAGOR 8025 CNC Control, mfg.1999 (#1918) Located: Lester, PA

SHEARCINCINNATI Model 4316 16’ x 3/8” Mechanical Plate Shear with 16’ x 3/8” Capacity, 48” Backgauge Range, 17 Holddowns, 48” Front Operated Power Backgauge, Left Hand Squaring Arm, Palm Buttons, (3) Extra Blade Sets, sn:24668, mfg.1966 (#1847) Located: TN

TANK TURNING ROLLSARONSON Model WRD150 150 Ton Tank Turning Rolls Driver & Idler with 28” Roll Diameter, 16” Roll Face, 2-64 IPM Speed Range, 5 HP, Infinitely Variable Turning Speeds, Pendant Controls, Idler Roll (#1819) Located: Lester, PA

CONTROLLED AUTOMATION 2AT-175 175 TON CNC PLATE PUNCHKOIKE ARONSON MYNUC400D 8' 8" X 43' PLASMA CUTTING MACHINE

PEDDINGHAUS FPB1500-3E 177 TON CNC PLATE PUNCH

CINCINNATI 4316 16' X 3/8" MECHANICAL PLATE SHEAR ARONSON WRD150 150 TON TANK TURNING ROLLS DRIVER & IDLER

Download A Lot Book at www.asset-sales.com


8

BENDING & FORMING MACHINECRITERION Hydraulic Tube Fabrication Work Cell Used for Manufacturing Farm Tractor Roll Cages, Consists of Hydraulic Bending Station with Tooling for 2” x 3” and 2” x 4” x 3/16” Square Tube and 5” Bend Radius, Drilling Station with (2) Drill Heads, Piercing Station with 4-Post Press, (5) Punch Stations, 12” x 28” Work Area, PLC Control System, Machine Was Purchased and Installed 2004 for $280,000 (#1556) Located: Lester, PA

TUBE BENDERPINES #2 PLC Hydraulic Tube Bender with Approx. 40’ Over Mandrel, Mandrel Extractor, Pressure Die Assist, PINES Dialabend #6 PLC Control, sn:11235-03002, mfg.2003 (#1956) Located: Monclova, OH

PAINT BOOTHSOUTHWEST Refinishing Paint Booth with 12’H x 37’W Door, 31’ x 15’ x 16’ Outside Dimensions, 40’ x 30’ Inside Dimensions, Down Draft System, (2) 30 HP Exhaust Fans, 40 HP, Roof Mounted Make-Up Air Unit – Gas (#2135) Located: West Virginia

SCREW MACHINES(2) ESCOMATIC Model D2 3/16” Coil Fed Swiss Screw Machines with 0.187” Max. Stock Diameter, 1.25-63.0 Production Range Output, 2 Rotating Cutting Tools, 6000-8000 RPM Toolhead Speeds, sn:1174 (#1711 & 1712) Located: New Hampshire

CRITERION HYDRAULIC TUBE FABRICATION WORK CELL PINES #2 PLC HYDRAULIC TUBE BENDER

SOUTHWEST REFINISHING PAINT BOOTH

(2) ESCOMATIC D2 3/16" COIL FED SWISS SCREW MACHINES

2003

2004


9

SOUTHBEND MX75/2500 8' ARM X 20" COLUMN RADIAL ARM DRILL

CINCINNATI 12" X 36" UNIVERSAL CYLINDRICAL GRINDER

CARLTON 5' ARM X 15" COLUMN RADIAL ARM DRILL

(3) GIDDINGS & LEWIS / WINSLOW EXACTAMATIC DRILL POINT GRINDERS

RADIAL ARM DRILLSSOUTHBEND Model MX75/2500 8’ Arm x 20” Column Radial Arm Drill with 50-2100 RPM, T-Slotted Base, sn:740003 (#2133) Located: Indian Trail, NC

CARLTON 5’ Arm x 15” Column Radial Arm Drill with 15-1500 RPM, 10 HP, Dual Controls, sn:3A 3055 (#2134) Located: Indiana

KENT 818-AHD 8" X 18" 3-AXIS HYDRAULIC SURFACE GRINDER

SURFACE & CYLINDRICAL GRINDERSKENT Model 818-AHD 8” x 18” 3-Axis Hydraulic Surface Grinder with 10” x 20” Actual Working Capacity, 19” Spindle to Table, 10” Cross Movement, Incremental Downfeed, Hydraulic Table & Electronic Crossfeed, 8" x 18" Walker Permanent Magnetic Chuck, Magnetic Separator with Paper Filtration Coolant System, mfg.1998 (#2091) Located: Indian Trail, NC

CINCINNATI 12” x 36” Universal Cylindrical Grinder with 12” x 36” Capacity, 12” Max. Swing Over Bed, 36” Distance Between Centers, Variable Speed Workhead with Tail Stock, Universal Grinding Head, Swing Down Internal Grind Motor (No Spindle), Coolant System, Assorted Centers, sn:2U3DIL-95 (#1867) Located: Indian Trail, NC

(3) GIDDINGS & LEWIS / WINSLOW Exactamatic Drill Point Grinders (#701, 703, 705) Located: Cincinnati, OH

Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great Finder’s Fees!

1998

Registration and Bidding

at www.asset-sales.com


10

BELT & MICRO TAPE SANDERSAEM Model D96317 36” Belt Grinder & Deburring Machine with 20” x 38” Front Table Dimensions, 3/16” -6” Height Under Belt, Rubber Belt, Pneumatic Tension, Pneumatic Tracking, sn:WB6859, mfg.1994 (#1802) Located: Holland, OH

(2) MASCO Single Spindle Vertical Micro-Finishers with 1.625” Abrasive Tape Width, 450’ Abrasive Table Length, 9.5” Abrasive Tape Max Diameter, 5 HP, Headstock – Tailstock, (2) Micro-Finishing Heads with Tape Feed Mechanisms, Oscillation-Auto Cycle, Hydraulic Unit, Coolant System with Separate Coolant Filtration, Automatic Lubrication System, sn:2-97-9626 (#1717) ● sn:98-3-1008 (#1718) Located: Cincinnati, OH

WELDING EQUIPMENTPECK SPUD & BOSS Model P3W3H Horn Welder For Circle Welding Tank, Shells and Drums 10”-30” Diameters, Spuds, Nipples, Coupling, and Bosses Capacity ½” – 6” Diameters, ¼” – 2-1/2” High, 30” x 36” Adjustable Table and 750 Amp Miller CP-5VS Welder. (#1757) Located: Indian Trail, NC

GENESIS Model CRZ-ST 10014 CNC Weld Cell with Fanuc 100iBe Robot with 54.05” Robot Reach, 37” Stroke, 39.73” Load Height, 59.06” Tool Length, 39.73” Tool Swing Diameter, CRZ-ST Single Trunnion Positioner, Lincoln Power Wave 455M/STT Power Supply, Wire Drive and Drive Roll Kit, Tregaskiss 500-Amp 22 Degree Air Cooled Torch, Genesis Torch with Wrist Alignment Station, AP Torch Reamer with Mister, FANUC Arc Mate 6-Axis 100iBe Robot, Fanuc System RJ3iC Control, mfg.2009 (#2052) Located: Lester, PA

PRESS FEED EQUIPMENTAMERICAN STEEL LINE Model 1000 20,000lb x 42” Motorized Reel, 72” Coil OD, 17”-21” ID Range, Hydraulic Expansion, V/S Drive, Forward / Reverse / Jog, sn:6508, mfg.1981 (#1224) Located: TN

ROWE Model ST-30 30” x 0.65” Straightener with .010” - .065” Capacity, 30” Wide, 7 Straightening Rolls, Entry and Exit Pinch Rolls, Variable Speed, sn:11073 (#0925) Located: Toledo, OH

PA INDUSTRIES Motorized Double End Uncoiler 16” Wide Mandrels, 22” Inner Coil Capacity, 48” Outer Coil Capacity, Motorized, Head Rotates 360° Coil Back Plates (#1004) Located Monclova, OH

AEM D96317 36" BELT GRINDER & DEBURRING MACHINE

GENESIS CRZ-ST 10014 CNC WELD CELL

AMERICAN STEEL LINE 20,000LB X 42" MOTORIZED REEL

(2) MASCO SINGLE SPINDLE VERTICAL MICRO-FINISHERS

PECK SPUD & BOSS P3W3H HORN WELDER

PA INDUSTRIES MOTORIZED DOUBLE END UNCOILER

Asset Sales, Inc. Does Not Pack, Ship, Crate,

Transport or Rig Items. Buyers May Pick Up Their

Items at the Auction Location or Can Arrange

for a Third Party Logistics Firm to Manage the

Removal Process for Them.

2009


Want to Join Our Mailing List? Want to be Included in Email Blast announcing

Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines

and Tooling Featured in an Upcoming Auction? Want to Request a Brochure?

Email Us at [email protected] or Fax a Request to (704) 821-4325!

11

NATIONAL BROACH RED RING GEAR SHAVER

COMBILIFT 8,000LB PROPANE MULTI-DIRECTIONAL FORKLIFT

GEAR SHAVERNATIONAL BROACH Red Ring Gear Shaver (#1495) Located: Statesville

COMBILIFT & FORKLIFTSCOMBILIFT 8,000lb Capacity Propane Multi-Directional Forklift, Model CL20080 LA47/48 with 46” Forks, 86” 2-Stage Mast, sn:17514, mfg.11/2007 (7,280 hrs) Located: Southbend, IN

COMBILIFT 9,000lb Capacity Diesel Multi-Directional Forklift, Model CL2009ODA 53 with 53” Forks, 108” 2-Stage Mast, sn:4456, mfg.4/2005 (10,709 hrs) Located: Southbend, IN

BRIDGE CRANE5 Ton x Aprrox. 100' Span Bridge Crane with Pendant Controls, Located: Denver, CO

BASIC ELECTRIC(7) GREENLEE Job Boxes

(12) 10’ – 15’ Fiberglass Contractor Ladders

(125+/-) On / Off Switch Boxes (Located under Shed Roof)

(6) ADRIAN Stainless Steel Diamond Plate Full Size Truck Tool Boxes

CLARK 2,000lb Capacity Propane Forklift, 4 Tires, 2 Stage Mast, sn:C20P-292-625-1164

JCB Model 506B Rough Terrain Loadall Forklift, 6,000lb Base Capacity, 3-Stage Telescopic Boom, 4-Way Steering, Diesel Engine, 4,950 +/- Hours on Hour Meter, Engine sn:794130B, VIN:S1B506B0VE0579505

6,000 Square Feet Warehouse Full of Electrical Contractor Supplies Including New Switchgear, Lights, Fuses, 10 +/- Reels of Electrical Cable, Hand Tools, HILTI Hand Tools, Scaffolding, (2) Sheds with Hand Tool Contents, RIDGID Tools, Benders, Core Drill, Heater, Etc….

(4) Mobile Job Trailers

5 TON X _____' SPAN _____________ BRIDGE CRANE

COMBILIFT 9,000LB DIESEL MULTI-DIRECTIONAL FORKLIFT

2007 2005

Registration and Bidding at www.asset-sales.com


12

Turn

ing Your Assets into Dollars

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – North Carolina 6625 & 6003

KING HI-COLUMN VERTICAL BORING MILL

ONLINE AUCTIONMAJOR MANUFACTURERS

CNC & MANUAL MACHINERY

BIDDING CLOSES TUESDAY, AUGUST 8TH @ 1:00 P.M. EDT

TUESDAY, JULY 25th - Eastview Mfg. Inc.CNC Precision Swiss Screw Machines & Centerless GrindersONLINE ONLY * Elgin, IL

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by Asset Sales, Inc. and Bidspotter at the time of the auction, any person participating in the webcast auction will be bound by the following terms and conditions. Neither Asset Sales, Inc. nor Bidspotter warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest webcast bidder conforming to the bid process in accordance to the AUCTION COMPANY’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removed in the time allocated by Asset Sales, Inc.. No item, no matter how small or how far the purchaser has to travel, may be removed until after the online auction is completely closed.

All payments shall be by wire transfer. All bidding and invoicing will be in US Dollars ($).

All bidders are responsible for all applicable taxes, in addition a 18% Buyer’s Premium is implemented for all online sales.

Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.

ALL ONLINE SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.

REGISTRATION & BIDDING ONLINE:

When participating as a buyer via Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agree-ment to the Terms and Conditions.

ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED.

UPCOMING AUCTIONSTHURSDAY, JULY 20th - Graphics & Mailing ServiceLate Model Digital Inkjet Printers, Feeders & FoldingONLINE ONLY * Montgomery, AL

THURSDAY, JULY 27th - Vero Machine IndustriesCNC Aerospace ManufacturerOnsite / OnlineVero Beach, FL

Documents

SURPLUS CNC & MANUAL MACHINERY NO LONGER … · · 2017-07-31MAZAK M-5B 24" X 82" M-5N CNC FLAT BED LATHE ... CONTROLLED AUTOMATION 2AT-175 175 TON CNC PLATE PUNCH 2002 (CTRL) 2007