Surface Mount Highpass Filters — 6-18 GHz u u Features: • Low Loss - Small Size • Temperature Stable • Uniform Mechanical Outline • VSWR: 1.6:1 • Insertion Loss: 2.5 dB • Mechanical Size: 0.44” x 0.24” x 0.15” • DC Blocking • Rejects Unwanted Signals • Provides Isolation Between Two or More RF Paths • RoHs Compliant www.klmicrowave.com Phone: 410-749-2424 • FAX: 443-260-2268 Email: [email protected] www.klfilterwizard.com 2250 Northwood Drive Salisbury, MD 21801 u Description: This 7-section family of AH series highpass filters provides Chebyshev response realized via Thin Film on Alumina substrate, typically 0.025” thick, using a sputtering process that guarantees enhanced Q and high repeatability. Filters can be soldered to PWB with recommended permittivity range of 3 to 4 or adhered to metal carrier with silver epoxy. Wire bonding end launches completes the mounting and attachment process. Designed in a shielded open- frame style, placement in a channelized groove is strongly advised to minimize RF leakage and coupling paths between input and output ports. u u Specifications: Part Number 3 dB Cut-Off Frequency Fc (GHz) Rejection 45 dB (GHz) 7AH1-6000/T18000 6 DC to 3 7AH1-6500/T18000 6.5 DC to 3.25 7AH1-7000/T18000 7 DC to 3.5 7AH1-7500/T18000 7.5 DC to 3.75 7AH1-8000/T18000 8 DC to 4 7AH1-8500/T18000 8.5 DC to 4.25 7AH1-9000/T18000 9 DC to 4.5 7AH1-9500/T18000 9.5 DC to 4.75 7AH1-10000/T18000 10 DC to 5 7AH1-10500/T18000 10.5 DC to 5.25 7AH1-11000/T18000 11 DC to 5.5 7AH1-11500/T18000 11.5 DC to 5.75 7AH1-12000/T18000 12 DC to 6 7AH1-12500/T18000 12.5 DC to 6.25 7AH1-13000/T18000 13 DC to 6.5 7AH1-13500/T18000 13.5 DC to 6.75 7AH1-14000/T18000 14 DC to 7 u u Performance Data:

Surface Mount Highpass Filters — 6-18 GHz - K&L …Surface Mount Highpass Filters — 6-18 GHz u Features: Size Stable Outline 1.6:1 dB 0.15” Blocking Signals s Compliant w w w

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Surface Mount Highpass Filters — 6-18 GHz

uu Features:

• Low Loss - Small Size

• Temperature Stable

• Uniform Mechanical Outline

• VSWR: 1.6:1

• Insertion Loss: 2.5 dB

• Mechanical Size: 0.44” x 0.24” x 0.15”

• DC Blocking

• Rejects Unwanted Signals

• Provides Isolation Between Two or More RF Paths

• RoHs Compliant

w w w . k l m i c r o w a v e . c o mPhone: 410-749-2424 • FAX: 443-260-2268

Email: [email protected]

w w w . k l f i l t e r w i z a r d . c o m2250 Northwood DriveSalisbury, MD 21801

u Description:

This 7-section family of AH series highpass filters provides Chebyshev response realized via Thin Film on Alumina substrate, typically 0.025” thick, using a sputtering process that guarantees enhanced Q and high repeatability. Filters can be soldered to PWB with recommended permittivity range of 3 to 4 or adhered to metal carrier with silver epoxy. Wire bonding end launches completes the mounting and attachment process. Designed in a shielded open-frame style, placement in a channelized groove is strongly advised to minimize RF leakage and coupling paths between input and output ports.

uu Specifications:

PartNumber

3 dB Cut-OffFrequencyFc (GHz)

Rejection45 dB(GHz)

7AH1-6000/T18000 6 DC to 3

7AH1-6500/T18000 6.5 DC to 3.25

7AH1-7000/T18000 7 DC to 3.5

7AH1-7500/T18000 7.5 DC to 3.75

7AH1-8000/T18000 8 DC to 4

7AH1-8500/T18000 8.5 DC to 4.25

7AH1-9000/T18000 9 DC to 4.5

7AH1-9500/T18000 9.5 DC to 4.75