Upload
ottodela
View
214
Download
1
Tags:
Embed Size (px)
DESCRIPTION
Plant transportation and support in plants powerpoint presentation.
Citation preview
SUPPORT AND TRANSPORT IN PLANTS
ANATOMY OF DICOT PLANTS
The Root
• Two types of root systems - tap root system - adventitious root system
TAP ROOT SYSTEM ADVENTITIOUS ROOT SYSTEM
- Arises from the radicle of the embryo
- Arises from any part of the plant except from the radicle of the embryo
- Main root can be distinguished
- Main root cannot be distinguished
Functions of the roots
• They anchor the plant firmly to the ground.• They absorb water and mineral salts.
External Structure of Root Tip• Root cap is made up of parenchyma cells. It protects the inner layers of the root.
•The growing point is made up of meristematic cells. Some of the new cells produced replace the parenchyma cells of the root cap which were damaged.
•Region of elongation – the cells comes from the growing point which begin to elongate.
•The root hair region has root hairs, which absorb water and mineral salts.Internally the cells in this region begin to differentiate into epidermis, parenchyma, sclerenchyma, xylem and phloem
• Mature region has side roots and fully differentiated tissues.
Functions of the various root tissues
• . The root hairs of the epidermis absorb water and mineral salts.
• The parenchyma of the cortex stores starch and the intercellular spaces allow water and mineral salts to pass through
• The passage cells of the endodermis direct water into the xylem of the stele.
• The pericycle gives rise to side roots• The xylem transports water and mineral salts from the
roots to the stem and leaves. It also provides strength to the plant.
• The phloem transports manufactured food from the leaves to the roots.
• The vascular cambium gives rise to additional xylem and phloem as the root grows in thickness
The StemFunctions of the stem:• They hold the leaves in a favourable position to
receive light for photosynthesis.• They hold the flowers in a favourable position for
pollination.• Most stems contain chlorophyll and they
therefore manufacture food by the process of photosynthesis.
• They store food and water• They transport water and mineral salts from
roots to leaves• They transport food from the leaves to the roots
Functions of the various stem tissues
• The cuticle reduces water loss through transpiration• The cuticle is transparent allowing light to pass through for
photosynthesis.• The epidermis may have guard cells to allow gaseous exchange
while at the same time reducing water loss through transpiration.• The hypodermis of sclerenchyma or collenchyma strengthens the
stem and helps keep it upright.• The parenchyma of the cortex stores food.• The intercellular air spaces between the parenchyma cells allow for
transport of water and gases.• The endodermal cells stores starch.• The sclerenchyma fibres gives strength to the plant and help to
keep it upright.• Xylem transports water and mineral salts from the roots to the
leaves• Phloem transports manufactured food from the leaf to the roots
Secondary growth of the stem
• Increase in thickness of the stem is called secondary growth or secondary thickness.
Secondary thickness takes place in 3 steps:- Formation of secondary xylem and secondary
phloem- Formation of cork- Formation of lenticels
Formation of secondary xylem and secondary phloem
• Parenchyma cells between the vascular bundles begin to divide. This with vascular cambium forms a complete ring of cambium
• Entire cambium divides to form secondary xylem on the inside and secondary phloem on the outside.
• Every year a new ring of secondary xylem is formed. These are called the annual rings. (can tell the age of the tree by counting annual rings)
• The xylem cells making up the older annual rings becomes clogged and are no longer able to transport water and mineral salts. They become heartwood.
Formation of Cork• Certain parenchyma cells in the cortex begin to divide and form cork
cambium• The cork cambium divides to form cork cells on its outside.• The cork cells have suberin laid down on their cell walls.
Annual Rings
Formation of Lenticles• In woody stems the stomata are blocked by the presence of
cork cells• The epidermis of woody stems breaks up to form tiny pores
called lenticles which allow gaseous exchange.
XYLEM• Xylem tissue is made up of four types of cells
- xylem vessels- xylem tracheids- xylem sclerenchyma- xylem parenchyma
• Xylem vessels and xylem tracheids are highly specialised cells.
• Xylem vessels are dead cells. They are long, cylindrical cells.
• Their cross walls are perforated or completely absent and form continuous tubes from roots to leaves.
• Xylem vessels have thick walls made up of lignin.• Lignin is laid down in various patterns- Annular thickening ( lignin laid in circles)- Spiral thickening ( lignin laid in spiral)- Scalariform thickening (laid in ladder form)- Pitted thickening (laid in pits)• Xylem tracheids are similar to xylem vessels except that
the ends are tapered and cross walls are always present
Xylem Vessels
Annular thickening ScalariformThickening
SpiralThickening
Pitted Thickening
Xylem Tracheids
Adaptation of xylem to transport
• Cross walls are perforated or completely absent – this forms xylem roots forms continuous tubes with the xylem stems and leaves.
• Xylem vessles have no living contents – allows the water to flow freely inside.
• The walls of the xylem vessels and tracheids are not completely thickened – the unthickened portions and bordered pits allow water to move across the root and stemAdaptation of xylem to provide strength
• the vessels and tracheids are thick-walled – they have a secondary wall of lignin• the vessels and tracheids are round in cross-section – round structures give additional strength
Phloem• Phloem tissue is made up of four types of cells:- Sieve tubes- Companion cells- Phloem parenchyma- Phloem sclerenchyma• Sieve tubes and companion cells are highly specialised cells• Sieve tubes are living cells with long cylindrical cells.• Their cross walls are perforated to form sieve plates• They are thin walled cells• They contain strands of cytoplasm which run through the
sieve plates from one cell to the next• Companion cells lie next to the sieve tubes – they are thin
walled, with cross walls and has a well-defined nucleus
Phloem tissue
The function of phloem tissue
• The sieve tubes transport manufactured food from the leaves to the all parts of the plant.
• The companion cells probably control the activities of the sieve tubes
Collenchyma and Sclerenchyma
Absorption and Transport of water and mineral salts by plants
• Water enters the root hairs of the epidermis of roots by osmosis
POINTS TO REMEMBER• THE SOIL WATER IS THE DILUTE SOLUTION• THE CELL SAP HAS CONCENTRATION SOLUTION
BECAUSE OF HIGH CONCENTRATION OF SALTS.• THE CELL MEMBRANE AND TONOPLAST IS SEMI-
PERMEABLE MEMBRANEOSMOSIS: MOVEMENT OF WATER MOLECULES FROM
HIGH WATER POTENTIAL TO LOW WATER POTENTIAL THROUGH SEMI PERMEABLE MEMBRANE.
Forces responsible for the upward movement of water
• Transpirational pull• Root pressure• Capillarity
Forces responsible for the upward movement of water
Transpirational Pull: • Water evaporates from leaves• Creates diffusion pressure gradient between outside air and
xylem• Tension exists in the water column extending from the roots
to the leaves• Adhesive and cohesive forces keep the column continuous• Thus water is continually being pulled upward as water
evaporates from the leavesUpward pull = transpirational pull
Forces responsible for the upward movement of water
Root pressure• Cell sap of root hair always has low water
potential when compared to soil water• Water enters root hair by osmosis• Continuous osmosis causes pressure forcing
water a short distance up the stemCapillarity• Spontaneous movement of water up narrow tubes
because of adhesion and cohesion is called capillarity
• Lumen of xylem vessels and tracheids are very narrow therefore capillarity takes place
• Upward distance is very short
Structural modifications of leaves to reduce water loss
(Internal factors limiting transpiration)• Sunken stomata: In some plants stomata may be
sunken or small.• Thickened cuticle: A thick cuticle on the surface of
leaves reduces the rate of transpiration.• Hair on leaves: the sheen r shine of the hairs of
some leaves reflect sunlight and reduces transpiration. Hairs also trap water vapour, restricting water loss.
• Shape, size and arrangement of leaves: The shape and size of leaves determine the total surface area exposed to the environment, and hence influence the rate of transpiration. The leaves of some plants are arranged in such manner that they shade each other or overlap each other. In this water loss is restricted
Environmental factors affecting the rate of transpiration
• Humidity: High humidity decreases transpiration rate
• Wind: Increases evaporation and thus transpiration increases. Wind removes the water vapour around
leaf thus increasing water vapour pressure gradient.
• Temperature: Increases evaporation and thus transpiration
• Light: generally causes an increase in the rate of transpiration
Wilting: Loss of turgidity of the cells results in leaves andSometimes the stems, becoming limp, causing them to droop.Then the plant is called wilting.
Guttation: Loss of liquid water through tiny pores, called hydathodes on margin of leaf.
Wilting Plant Guttation
Economic uses of plants related to their anatomy:
• Paper•Clothing•Timber for furniture-making and building construction•Basket-making•Thatching, matting and broom-making