SUPPLIES FOR THE STEEL RULE DIE INDUSTRY · 3 STEEL RULE Cutting Rule Profiles available in ground or shaved edge in several bevel angles. Creasing Rule Profiles designed to make

S U P P L I E S F O R T H E

S T E E L R U L E D I E I N D U S T R Y

ONTARIO, CA • DALLAS, TX • ELMHURST, IL

www.wagnerdiesupply.com

Since 1947, Wagner has focused on providing customers with thebest in quality, value and service. That’s what our philosophy is all about – we provide our customers with more than justgreat supplies and equipment, we back up our products with the best in service and technical support in the industry.

This catalog is only a sampling of the wide variety of productswe carry. Please contact us or visit our website for completeproduct information.

A B O U T W A G N E R D I E S U P P LY A N D

O U R P H I L O S O P H Y

PROUD TO BE ASSOCIATED WITH:

WAGNER DIE SUPPLY ACCEPTS:

Download a printable PDF format credit card approval form from our website at:http://www.wagnerdiesupply.com/creditcardappr.htmlOr call us at (800) 423-4478 and request that onebe sent to you by fax or mail.

CREDIT ACCOUNTS:Terms: Net 30 days.Minimum order: $50.00Returned checks will be charged $30.00To establish a credit account with Wagner DieSupply, download a credit application from ourwebsite at:http://www.wagnerdiesupply.com/creditapp.htmlOr call us at (800) 423-4478 and request that onebe sent to you by fax or mail.

OVERAGE POLICY:On custom-made products Wagner Die Supplyreserves the right to ship up to a 10% overage.Your Wagner Die Supply customer servicerepresentative can answer any questions youmight have regarding our overage policy.

© 2019 Wagner Die Supply

Section Pages Product Group

1-2 WAGNER PUNCHES

3-6 STEEL RULE

7-10 DIEROOM SUPPLIES

11-12 EJECTION MATERIALS

13

DIEROOM EQUIPMENT

14-15

CREASING MATRIX

17 HENDERSON STORAGE SYSTEMS

16

DIECUTTING & MAKEREADY

C O N T E N T S

www.wagnerdiesupply.com800-423-4478 toll-free

or via email: [email protected]

1www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L

W A G N E R P U N C H E S

A leader in punch manufacturing since 1947, Wagner Punches have always been manufactured in the U.S.A. under stringent qualitystandards. Wagner punches feature our industry-exclusiveEnduro CBN™ heat treating process. Wagner makes a wide varietyof in-stock punches and has the capability to produce just about any typeof custom punch imaginable, using our expertise and state-of-the-artCNC machining. Wagner punches are also identity-etched for easy identification and accurate reordering. For a complete listing of Wagnerpunches please contact us, or refer to the Wagner Punch Catalog, available on-line at www.wagnerdiesupply.com.

Seamless Tube Punches

Oval Tube Square Tube withand without Spring

Inside DiameterRelieved (cut-awayview shown)

007 Straight Cut -featuring minimumsupport bevel

Outside DiameterRelieved

Notched Tube Straight O.D. Rotary Serrated -Available in I.B. or C.B.

Inside-Bevel, Inside-Serrated Rotary

Standard Tube withEjectors

Standard Tube withSpring

Special Base

Cup Punches Cross Cuts Pin Points Washer Sets

W A G N E R P U N C H E S

2www.wagnerdiesupply.com

Seamless Hangers Feed Thru Feed Thru Ovals Serrated Feed Thru

Heavy WallFeed Thru

Clicker style FeedThru

Self-Cleaning - Standard, Knurled andKleen Cut™

Self-CleaningSerrated

Self-Cleaning withNo-Turn Pin

Self-CleaningSquares

Self-Cleaning Ovals Rule Connectors

Micrometer Adapter -for measuring rule andpunch heights up to 1”.

Custom-milled punches - designed and manufactured to customer specifications (materials and applications).

Custom-milled Punches

Contact us or visit www.wagnerdiesupply.com for the latest information!

O N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L

3

S T E E L R U L E

Cutting Rule Profiles available in ground or shaved edge in several bevel angles.

Creasing Rule Profiles designed to make an impression in the die cut product for folding.

Perforating Rule available from 2 teeth per inch to 100 teeth per inch (TPI).

Wave Rule available in edge wave or full body wave, depending on wave required.

Tear Edge also known as zipper rule.

Rotary & Serrated Rule used in cylinder and flat bed cutting.

Center Bevel

Single Bevel

Long Center Bevel

Long Single Bevel

Known as: Typical uses:

Center Bevel, Standard Bevel, DoubleBevel, Center Face or A Bevel.

This is by far the most popular bevel forconventional paperboard cutting.Approximately 85% of all paperboard cut-ting is done with a Center Bevel rule.

Side Bevel, Single Bevel, Side Face,B Bevel or Flush Bevel

Single Bevel rule produces a square finish. It’s also used to produce tighter bends,compared to Center Bevel rule.

Long Center Bevel, Double Double Bevel,Center Face Double Bevel,Facet Bevel orAA Bevel

This rule is especially effective when cutting hard and/or thick materials.It helps reduce cutting pressure by deflectingpressure with the first bevel supported by thesecond bevel.

Standard length of Bevel: 2 pt. - 1/8” long3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long

Standard length of Bevel: 2 pt. - 1/8” long3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long

Long Side Bevel, Long Single Bevel,Side Face Double Bevel, Side Facet Bevelor BB Bevel.

Also used for cutting thicker and/orharder materials. The long Single Bevel designreduces the crush to the finish die cut productwhen the bevel faces away from the piece.

2 PT and 3 PTStandard Double

Round

2 PT body with a 3or 4 PT top

3 PT body with a4 , 6 or 8 PT top

4 PT body with a6 or 8 PT top

4, 6 and 8 PTSingle Round

2 PT body with a1 or 1.5 PT top

2 teeth per inch

6 teeth per inch

12 teeth per inch

3/32” tooth x 1/32” space



Corrugated edge wave Medium fine edge wave Medium angle full body wave

Patterns are not actual size, contact Wagner Die Supply for a full listing of exact sizes and styles.

Pattern is not actual size, contact Wagner Die Supply for a full listing of sizes and styles.

Rotary rule available in 8, 10, 12 and 13 serrated teeth per inch in curved and straight styles.

Serrated rule is designed for cutting foams, films and other materials that are difficult to cut.Available in a wide variety of teeth per inch configurations.

Contact Wagner Die Supply for a complete listing of National Steel Rule products.

Above is a limited sample of typical tooth and space configurations, many other configurations are available from our extensive inventory.

Thickness: 1 PT 1-1/2 PT 2 PT 3 PT 4 PT 6 PT 8 PT.014” (0.36 mm) .021” (0.53 mm) .028” (0.71 mm) .042” (1.07 mm) .056” (1.42 mm) .084” (2.13 mm) .112” (2.84 mm)

Other creasing rule profiles are available, like Tru-Fold, Positive Score and MicroTrak.

www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L

4

S T E E L R U L ECutting Rule -Manufacturers and their productswith specifications and applications.

Manufacturer Product Hardness Special Characteristics Product ApplicationTopH-75UniversalUniversal 40Universal 60Universal 75Extra Supreme TinitLabel-XPlast-XX-Press

TopDurFlex®

TopDurFlex S®

Special 60WTINBrilliant

Helmold 65 UltraflexHelmold 70 Helmold 80Helmold 85 Helmold Lazer BladeHelmold Lazer Blade HHelmold Lazer Blade DHelmold Lazer Blade HD

HP 34HP 40HP 44HP 51MM 40MM 44MM 52Supra Z

A = 45 HRC A = 51 HRCB = 35 HRC, C = 57 HRCB = 40 HRC, C = 57 HRCB = 45 HRC, C = 57 HRCB = 51 HRC, C = 58 HRCB = 40 HRC, C = 59 HRCUniversal, Universal 60UniversalB = 45 HRC, C = 58 HRCB = 35 HRC, C = 53 HRCB = 35 HRC, C = 57 HRC

B = 35 HRC, C = 53 HRC

A = 45 HRCA = 50 HRC A = 54 HRCA = 58 HRCB = 34 HRC, C = 57 HRC B = 45 HRC, C = 57 HRCB = 34 HRC, C = 57 HRCB = 34 HRC, C = 57 HRC

B = 34 HRC, C = 60 HRCB = 39 HRC, C = 67 HRCB = 46 HRC, C = 61 HRCB = 51 HRC, C = 61 HRCA = 40 HRCA = 44 HRCA = 52 HRCB = 40 HRC, C = 60 HRC

-------- Special coating, low-dust- Tin coated, Long life- Designed for labels- Designed for plastics- Self-levelling

- Shaved edge rule- Ground rule, edge hardened- Micro-ground rule- Tin coated- Hardened tip, slim bevel

- All purpose utility rule- Hard rule, longer runs- 80S and 80M for long life - Straight work- Edge hardened- - Extra deep edge hardened- Extra deep edge hardened

- Plasma beam hardened- Plasma beam hardened- Plasma beam hardened----- Fine ground edge bevel

- Cardboard, corrugated, labels.- Gaskets, rubber, cork, felt.- Cardboard, corrugated, labels.- Cardboard, corrugated, labels.- Plastics, thin gaskets, foils.- Metal foils, gaskets, plastics.- Gaskets, plastics, composites.- Labels, dust control. - Long die life.- Label cutting, foils, films.- Plastics, PET, PE, PP, PVC, foils.- Solid board, corrugated.

- Cardboard, labels, corrugated.-- Coated materials, foils.- Fast food, pharmaceutical.- Coated boards, foils, plastics.

---- - Packaging, kiss-cut, folding carton.

- Abrasive materials - Abrasive materials

- Recycled and virgin paperboard. - Recycled and virgin paperboard.- --- Paperboard, corrugated.-- Plastic, blister, laminated boards, labels.

A B

C

Through Hardened Edge Hardened, Softer Body

Refer to “Hardness” column for individual (HRC) Rockwell readings.

Premium Nataloy Nataloy EH

2PT., .937 EH SE AB 328’3PT., .937 EH SE AB 328’

B = 38 HRC, C = 54 HRCA = 41-44 HRC

B = 35 HRC, C = 57 HRC

- Induction hardened edge- Shaved or ground edge- Edge hardened

- Shaved edge- Edge hardened

- Solid fiber and corrugated.- Corrugated- Corrugated, folding carton.

- Folding carton, corrugated

More Steel Rule next page...

Coil Ends on the

LeftCoil Ends on the

Right

Bevel is always on top! Manufacturer Coil Direction: ClockwiseCoil Direction: Anti-Clockwise(or Counter-Clockwise)

Clockwise

R - Clockwise

R - Clockwise

DP (21” O.D.) , KX (18-3/8” O.D.)

Customer Specified.Customer Specified.

AC (21” O.D.), AB (18-3/8” O.D.)

Anti-Clockwise

Anti-Clockwise

RU - Anti-Clockwise

Anti-Clockwise Clockwise

Coil Direction Information for Auto Benders & Rule Processors:

Wagner refers to Anti-Clockwise as “AB” or “RW” for reverse wound.

RU

Note: Rules are also available in Dispenser Coilsthat are wound in a clockwise direction. WARNING: Dispenser Coils should never be used to load automated benders.


5

S T E E L R U L E

Creasing Rule

Cut-Crease, Wave, Tear Edge, Zipper & Stripping Rules

Bohlerstrip HTBohlerstrip HR

- Hardened and tempered- Hard rolled

- Recommended on rules 3 pt. and less.- Recommended on rules 4 pt. and greater.

A = 39 HRC

Top & Universal Cut-CreaseTop & Universal Glue FlapTop & Universal Wave Edge& Deckle Edge Rules

Top 36 Zipper Edge RulesTop 36 Stripping RulesTop 36 Sure-Strip

- 2, 3, 4 pt.- 2 pt.- 2, 3 pt.

- 2, 3 pt.- 3 pt.- 3 pt.

- Bevels: CF, CFDDB- Bevels: CF- Bevels: CF, CFDB

- Bevel: CF- Flat top- Bevel: CF

- HS - cutting part height,HR - creasing part height. - Used to prep cardboard for adhesive.- For production of safety cutting edges on corrugated.

- Tear open solution for shelf-ready packaging.- Used for ejecting waste material after diecutting.- Used for ejecting waste material after diecutting.

Creasing RuleLaser CreaseFacet Creasing Rule

Creasing RuleReverse Laser Crease

Standard Creasing RuleTapered Creasing Rule

Rotary Laser CreaseTru Fold Laser CreaseMicroTrak CreaseI-Crease

---

- Single Round (SR) or Double Round (DR).- Wider scoring edge using a 2 pt. die slot.

- HW hardness achieved through cold-rolling.-

P-Crease RuleDouble Creasing RuleHalf Crease Rule

1.5 pt. A = 45 HRC, 2 - 3 pt. A = 40 HRC, 4 - 6 pt. A = 35 HRC

Standard Creasing Rule HW -Heavy Top Creasing Rule -

Wave Score -Duo-Score -MicroTrak Laser Crease -

- MicroTrak can be added to creasing rules. --

Crease/Cutting Rulewith Flat Crease

Crease/Cutting Rulewith Round Crease

Speedi ProductsGlue Flap Rule

Combination Cut andCrease Rule

Wave RuleSteel Spacing LeadsTear Edge (Zipper) Rule

Speed Stripping RuleWaved Stripping RuleWaved Esopick RuleWaved Stripping Rulewith Perf

Zipper RuleTissue Perforating RuleStripping RuleEsopick Stripping RuleStripping Rule with Perf

- 1.5, 2, 3, 4 pt.

- 1.5, 2, 3, 4 pt.- 1, 1.5, 2, 3, 4, 6 pt.- 8” lengths, 2 pt. body

MM44 Combination Cut/Crease Rule

HW Spacing Rule HW, MM34, MM40 Stripping Rule

Combination Cut/Crease Radius Gullet Combination Cut Crease Rule

Platinum Combo ScoreBundle Breaker Rule

PERFormaX Rule8-Tooth EZ Strip Rule10-Tooth Prenick RuleTear Edge (Zipper) Rule

MM40, HP40 Wave Edge Rule

MM44 Glue Flap RuleMM34 Zipper Rule

More Steel Rule next page...

Manufacturer Product Hardness / Details Special Characteristics Product Application

Manufacturer Product Details Characteristics Product Application

Manufacturer Product Product Product



S T E E L R U L E

6

Perforating Rule

Rotary Rule Cutting Rule

National Rotary Rule - General Coil Information:

Top Universal

Perforating RuleAsymmetrical Perf RulesSpecial-Micro Perf Rules

12 Tooth10 Tooth8 ToothEuro-Cut10 Tooth Euro-Cut12 Toto Euro-CutKleen Kut10 Tooth Kleen Kut13 Tooth Kleen KutScalloped16 Tooth20 ToothSuperCutExtreme 9Super SixArrowhead10 Tooth ArrowheadRP810 Tooth NZ Style Klean Kut13 Tooth Shallow Profile14 Tooth Shallow Profile

Perforating Rule

MM44HP40

Rotary Perforating RulePrism PerfMicro-PerfInvisible Perf

- 2, 3, 4 pt.- 2, 3, 4 pt.

- 2, 3, 4 pt.- 2, 3, 4 pt.

- Shaved edge.- Shaved bevel - Shaved bevel, “V” ground teeth- Shaved edge, edge hardened- Shaved edge, edge hardened- Shaved edge, edge hardened- Hard alloy steel, unique bevel- Hard alloy steel, shallow gullet- Edge hardened, shallow gullet- Center bevel, edge hardened- Available symmetrically ground- Edge hardened or standard- Multi-purpose, avail. in 10 tooth- Teeth slant at a downward angle- Ground from one side- Long shaved bevel, edge hardened- Symmetrical ground, hardened edge- Symmetrical ground, shallow gullet- Side bevel, shallow gullet- Radius tooth, hardened edge- Center bevel, ground on one side

- 1.5, 2, 3, 4 pt.

- Bevels: CF, CFDDB- Bevels: CF, CFDDB

- Bevels: CB- Bevels: CB, LCB, SB, ISB- Bevels: LCB

- A wide range of tooth configurations for the corru-gated, folding carton and business form industries.

- All common tooth/gap configurations available.

- Serrated perf recommended for tooth sizes above 1/4”- Alternative to serrated perf.- Used in business forms, fine perf rule.- Ultra-fine

- Minimizes dust, cuts a wide variety of materials.- Reduces edge crush, can be edge hardened.- Cuts with minimal pressure.- Cuts with reduced penetration, saves die rubber.- Minimal penetration, increases blank & anvil life.- Excellent for E Flutes and other light grade board.- Excellent for lead edge knife, or long horizontal cuts.- Low cutting pressure, good on plastic corrugated.- Excellent on plastics and micro flute corrugated.- Excellent for cutting rubber, fiber and plastics.- Excellent for displays or for a superior edge.- Good for cutting light board and micro flutes.- Creates a safety edge, provides excellent anvil life.- Cuts heavy board. For long, across the cylinder cuts.- Improves stripping and cuts with less pressure.- Reduces edge crush, perfect for power flute.- Longer anvil life,for medium to lighter board weights.- Longer production runs, excellent bendability.- Perfect for difficult scrap areas, improves anvil life.- Ideal for flat applications.- Cuts with minimal pressure, good for fabrics, rubber.

A = 45 HRC B = 35 HRC, C = 57 HRC

A = 50 - 70 HRC

A = 40 HRCB = 39 HRC, C = 67 HRC

Manufacturer Product Hardness Heights Product Application

Product Special Characteristics Product Application

12 Tooth

8 Tooth

20 Tooth

Kleen Kut

Extreme 9

Coil Ends on the

LeftCoil Ends on the

Right

Bevel is always on the outside.

Counter-Clockwise Clockwise

Reverse WoundCurved Rule

Standard WoundCurved Rule Coil Direction: ClockwiseCoil Direction: Anti-Clockwise

(or Counter-Clockwise)

DP (21” O.D.) , KX (18-3/8” O.D.)AC (21” O.D.), AB (18-3/8” O.D.)

Wagner refers to Anti-Clockwise as “AB” or “RW” for reverse wound.


7

D I E R O O M S U P P L I E S

Dieboard - Flat & Rotary - Flat - available in Birch & Maple;Rotary available in Maple, Mixed Core & Dura Core.Many sizes & styles available, contact us for more information.

Jig Saw Blades -For Richards, Laborsaber,Sandvik, Sabermatic andCutawl.

Router Bits - for diemakers using routers.Use Wagner ColletCare forcleaning, lubricating andprotecting spindles.

Kevlar® Gloves - Safety gloves - ideal forhandling and ruling dies.Part # Z KVD18AR

Diemaker’s Apron -Saves wear and tear onclothing, handy pocket onfront for scribes and pens.Part # Z 5256T8

Quicknick Grinders -In 110V or pneumaticversions.110 V - Part # 3115142Pneumatic - Part # 3270201

Dumore Grinder -Model #10-351 22,000 RPMmax, uses #39 mandrel.Part # Z 10-351

Dremel® 100 Series -35,000 RPM single speedgrider (Part# Z 270).Uses these grinding discs:#409 . . Z #409 G.D. #420 . . Z #420 G.D. #426 . . Z #426 G.D.

G-Lam Adhesive -Specially-formulated forlaminating two 5/16” routeddieboards. Green tint for accurate application!1 gal. Part # U G-LAM 1GL5 gal. Part # U G-LAM 5GL

Grinding Wheels - Rubber-bonded or reinforced wheels invarious thicknesses.

Nicking Chisel - Inexpensive way to nickor increase nick width,complete with three tips.020, .030 and .040.Part # 3280001

Pocket Scribes -#81 - 3/8” dia., #83 - 1/4”dia., #88 - Carbide pointwith pocket clip.

Retractable Pins -Used in blister packagingfor registration, made ofaluminum.

Registration Pins -Close tolerance retractablepins, 1/8”, 5/32”, 3/16” &1/4” sizes available, used onprogressive dies.



8


Extractor 2000 -The safe way to pull rule,designed and manufacturedby Wagner Die Supply in theUSA (see page 16).Part # WWPULLER

Bar-Plate Rule Puller -Lifts rule as close as 1/4”apart. Part # 3390001

Pneumatic Rule Puller -The 50-0 and 50-0-HD unitspull rule using pneumaticallyoperated pins to provide lifting power. Part # 4 50-0

Channellock Pullers -7” - Part # Z PULLER 78” - Part # Z PULLER 810” - Part # Z PULLER 10

Elastomer Mallets -#4 2” dia. hd. Part # TEL4#4L 2” dia. hd. Part # TEL4L#5 2-3/4 dia. hd. Part #TEL5#6 2-3/4 dia. hd. Part #TEL6 #6L 2-3/4” dia. hd. Part #TEL6L

Urethane Mallets -#4 - 2” dia. hd. Part # T4W#2x5 - 1-7/8 dia hd. Part # T4WL#5 - 3” dia. hd. Part # T5W

Urethane Mallets -From left to right:#5 Part # T 5 PM#2x5 Part # T 25 PM#4 Part # T 4 PM #4 Part # T 4 PM W

Rawhide Mallets -#3 1-3/4” dia. hd. Part # T3RM#4 2” dia. hd. Part # T4RM#5 2-3/4” dia. hd. Part # T5RM#6 2-3/4” dia. hd. Part # T6RM#5 Long Hndl. Part # T RM275

Multi-Cutter - Cuts rubber and non-metallic matrix, with spareblades and anvil.Part # Z 480501Replacement Blades (3) &Anvil kit Part # Z314814

Red Urethane Mallets -Three styles available.#4L 2” dia. hd. Part # TRU4L#6 2-3/4” dia. hd. Part # TRU6#6* w/long handle Part # TRU6LH

Rule Setter & Tamper-Designed by Bar-Plate forworking on rule on the die. Setter - Part # 3420001Tamper - Part # 3420101

Rule Tweaker -Available in either 2, 3 or 4pt. versions from Bar-Plate.2 pt. - Part # 34202213 pt. - Part # 34202314 pt. - Part # 3117514

Super Sharpener -For spot sharpening of ruleon dies, includes safetyshield*. Part # Z SUPERSHRP

Hand Rule Cutter -Cuts 2 & 3 pt. rules.Part # Z #1290-G

* Designed for sharpening dies which cut into a cutting pad.

Corrugated Fasteners3/8” and 1/2” sizes, settingtool available.3/8” Part # Z CF-3/81/2” Part # Z CF-1/2Setting Tool - Part # Z CFHT

Air Fastener Gun -Used for installing corrugated fasteners.PART # Z SC2



9

Die Bolts -1/4” x 1-1/8”, 5/16” x1-1/8”, 5/16” x 1-3/8” sizesand Hamada style.

2” #89 Pinch Dogs - Holds 2 pieces of dieboardtogether temporarily.Part # Z 89PINCHDG

Speed Mount WasherExclusively designed forrotary dies, 3/8” x 5/8”.Part # Z SM ELONG

T-Nuts - Available in both standardand metric sizes.

Coil Keepers - Specially designed hook &loop fasteners that keepsteel rule coils secure. PART # Z CL/K

Rotary Hoops - Rotary hoops, double-taper design, 4 sizes.

Rotary Hoops - Precision rotary hoops forMartin® Posi-lock® System,4 sizes.

Die Matte Film -Matte/frosted on one side,.003 - .005 in a variety of rollwidths & lengths.

Carbon Paper -available in various sizes.

Rule Guards -Help maintain alignment onrotary dies.Steel - Part # Z RULEGDHDNylon - Part # Z RULEGUARD

4-Way Hardware -Adjustable slot for 2” to3” hole spacing, 1/4” and5/16” widths available.

Type Perf - 3/4”, 1/2” or 3/8” tall type available, with manystyles of tracks for each size. Characters include the upper casealphabet, numbers 0-9, slash and recycled logo.

LeGard -Lead edge knife brace for rotary dies, reduces lead knifefailure. 100 Le Gards per bag.Standard for rule up to 1-1/8” tall

Part # Q LEGARDJumbo for rule over 1-1/8 tallPart # Q LEGARD-J

Low for 3/8” thick dieboardPart # Q LEGARD-L

BridgeSavers™ -BridgeSaver™ added to therule near the join line enhances rule grip & die life.100 BridgeSavers™ per bag.Part # Q BRIDGE

Shoulder Flex 2 -Surface mounted, helps corrugated from cracking..350 Blue 50’ Part # Z SF35050.375 Orange 50’ Part # Z SF37550

Large = 3/4”*

Medium = 1/2”*

Small = 3/8”*

* Height of Perfed Characters.

Parts for EVOL Dies -Wagner can supply parts andcomponents for EVOL dies.

We’re your Source and Resource, always working to improve our product line, and you can help! If you don’t see something you need, contact us, let us know about it and we’ll do our best to locate it for you.


10


Stripping Pins - 50 mm long, flat, singlepoint and multi-point.

Stripping Claws - Right and left versions, invarious widths, 50 mm inlength.

Spring Pins -In various widths andlengths, used as strippingpins.

Inca Nails - 50 mm long stripping pins.500 per box. Part # 0 STP-2

Female Clamping JawsMade from Nylon, includes installation screws.Part # 0 BOBST CCJ

Easi-Blank Joggers -Designed for universal use.

Blanking Easi-Foam -Ideal for the male blankingtool.

Distance Spacers -Used in stripping andblanking tooling, varioussizes and styles.

Trim Breakers - Universal, right or leftin a variety of sizes and styles.

Easi-Blank System -Assembled frame kit withjoggers.

Easi-Blank Frame Kit -Designed for Bobst and Iberica blanker presses.

Stackers -3/16” and 5/16” with screws.

Centerline - Storage Bolts and Nuts (blue, orange, yellow, black) 43 mm. - 50 mm., Unthreaded T-Nut, Black & Red Centerline Pieces.

Upper & Lower Stripping Pins - Andsupporting assemblies including all brackets, pinsnuts and bolts. Availableas an assembly, or by indi-vidual parts.



11

E J E C T I O N M AT E R I A L S

Monroe Ejection Materials 12000, 22000 &10000 Series

Green G’rilla™ Red Rhino™ MR75 BK85

From left to right: Ejecto-Flex, MR Point, MR Wave and Side Wave.Available in wide range of styles including Green G’rilla, Red Rhino,MR75 and other Monroe materials.

Monroe Micro-Cell ejection materialsare consistent and durable. Thenewest, 10000 Series is designed for nocrush performance on recycled board.All are available in black, gray, red, tan,orange and blue, w/wo PSA.

MR 1100

Monroe’s MR1100 microcell rubberoutperforms conventional open cellrubber in compression, ejectionspeed and durability. Available insheets, strips and blocks, w/wo PSA.

Green G’rilla and Red Rhino shown in “Groovy” slot rubber.


More Ejection Materials next page!

Monroe Profiles

MR75 is a microcellular polymer without the drawbacks of old standard 75 rubber.

Firm microcell material with a durometer rating of 83-90 &40-50.


KO-19KO-30

KO-4 KO-10

KO-3

KO-1

KO-2G

KO-11 KO-18

KO-2

B

Kodiak Open CellKodiak Ejection Materials

Kodiak ProfilesKodiak Closed Cell & MicrocellFrom left to right: Blue Frontier, KO-15 (closed cell),Red Grizz, Green Grizz and KO-20T. Available insheets, strips and shapes in a wide variety of heights.

Available in a wide range of heights, in sheets, strips andshapes.

From left to right: Kodiak Trap Cut, BearClaw and Side Wave profiles. Profiles

available in open and closed cell styles.

12

E J E C T I O N M AT E R I A L S

Stripping Foam -Gray 6#, White 2#.

Blue Slot Rubba - Available in several thicknesses.

Multi-Cutter -Perfect for cutting strips,includes spare blades.Part # Z 480501, 3 Blades &Anvil kit Part # Z314814

Grip N’ Strip - Holds tight andstrips clean, water-based, in 1 qt., &1 gal. sizes.

SuperSet - Wagner’s exclusive line of specially-formulated adhesives. SuperSet adhe-sives were developed for use specifically in the die industry, right here in the USA! Avail-able in 1 lb. bottles in LV (Light Viscosity, MV (Medium Viscosity) and HV (High Viscosity).Also available in GEL version, in 0.7 oz. tubes and 10.6 oz. cartridges! QT2 Activator and SuperSet deBonder are also available.

SuperSet QT2 - Activator - OPTIONALfor use with all SuperSet viscosities.Speeds-up setting time, and limits penetration into the wood for easier re-rubbering! Swab applicator included forprecise and efficient application.

D-Profile Rubber - Helps hold sheets togetherin high speed diecutting,reduces nicks needed in die.

Kushion Crease -For rotary dies, reduces fractured scores.

C-Profile Rubber -60 Durometer, white non-marking. Other profiles & materials available.

Dura Strip & VulcanSheets -Premium slot rubber.

ReelStrip™ - Vulcan slotrubber in coils, 1/4”, 5/16” &3/8” heights, in variouswidths and roll lengths.


Wagner Die Supply open cell die ejection materials.

EXCLUSIVE - Wagner Die Supply Adhesives! The best selection of adhesives in the industry!!

Wagner offers a family of open cell materials in strips, blocks and sheets in various thicknesses with and with-out PSA. Di-Wave and Di-Point profiles are also available. Contact us for availability.

Black 65 Red 70 Red 75

13

C R E A S I N G M AT R I X

Plastrix™ - Film-based Synthetic matrix.

Pink® -Fibrous Matrix

Countamax -Phenolic-basedMatrix

Corrugate -Matrix for designed for Corrugated.

Multi-cutter - Cuts non-metallic matrix,includes spare blades.Part # Z 480501

CCM Bench MiterPress. Part # SCCM BENCH

Bobst Metrix - Metal Based Matrix.

Bobst Corrugate - Specially-designed for creasing corrugated.

Bobst Fibrix - and Fibrix Pro PressboardMatrix.

CCM Matrix Miter Plier -Cuts miter on all matrix.Part # S 703700

Dolphin Cutter -Performs easy angle cutson matrix or rubber.Part # 3115433

Bobst Syntrix - All Plastic Matrix.

Bobst Super Cut -Model 3 bench miter press.Part # S313027

Marathon™ - Vulcanized Fiberboard Matrix.

Creasing Matrix

Channel® -Original Metal-based Matrix


14

D I E C U T T I N G & M A K E R E A D Y

Phenolic material is available in flexible orrigid styles, .017 to .049 thick, in 39” x 39”or 42” x 42” sheets, some sizes availablewith P.S.A.

Counterplate Locating Rings and Spacers allow accurate location of thePhenolic Counter onto the Thin Plate.Pins available in aluminum & plastic inwhite, black or transparent purple.

Cutting Jackets -For Miehle, Miller,Heidelberg and manyother presses .

Cutting & Back UpPlates - 47 - 52 RC Hard-ened for Bobst, Brausse,Kluge, Heidelberg, Thompsonand many others.

Wagner PlateWipes -Micro-Fiber towels forcleaning cutting plates,jackets, and thin plates.Available in 12-packs.

Chase Plates - Chase plates & ProtectionPlates from Bar-Plate fora variety of Bobst presses.

Cutting Plate Cleaner - Quick, residue-free cleaning.8 oz. Spray Part # Z 111-8 OZ16 oz. Spray Part # Z 222-16OZ1 gal. Part # Z 116-1GAL5 gal. Part # Z 116-5GAL

Double Face Tape -1”, 2”, 6” and 12” Wide Rolls.1” . . Part # Z MR1.0 DF2” . . Part # Z MR2.0 DF6” . . Part # Z MR6.0 DF12” . Part # Z MR12.0 DF

Profitape® -Blue: .001”, Red: .002”and Yellow: .003” in 1/4”(6mm) width. Dispenser isalso available.

Fit Tape -.0015 x 5/16” steel shimtape in 33’ rolls, self-adhesive. Part # SFIT SHIM

Shim Tapes -.002 and .005 in 33’ or 100’rolls, made from stainlesssteel, self-adhesive.

Makeready Tapes& Dispenser -1/4” or 1/2” wipe tape in.0015, .003 or .006 thicknesses.

Tympan Paper -Avail-able in sheets or rolls,used for makereadysheets.

Makeready Patch-upPaper - Available in rollsin a variety of widths andlengths. Moisture and tearresistant.

Thin Plates & Phenolic MaterialCounterplate Locating Pins & Pin Spacers

Thin Plates are available in soft, mediumand hard. Excellent for use with routed Phenolic counters or with matrix to help reduce makeready time on recurring runs.Thin Plate technology can be adapted to suit most autoplaten presses.


15

Air Stripping HammerQuickly strips and separateswaste from diecut parts, accessories also available.Part # 3311000

Air Tool Balancer -Supports tools weighing5 to 20 lbs. Part # 3311073

Stripping Hammer -For stripping waste andtrim by hand.Part # T #2 HAMMER

Powerlock Quoin -Compact, great for secur-ing rule sections that areregularly replaced.Part # Z PWRLOCK

Wagner Grabber -The safe way to remove scrap and debris from thestripping end of the press!2 sizes, 36” and 51” lengths.36” Part # Z GRABBER51” Part # Z GRABBER51

G&R Stop Guides -For use on clam shell typepresses when cuttingcorrugated material.

Adjusto Guides -Available in 2” x 2” or2” x 1” versions.2” x 2”Part # 34800712” x 1” Part # 3480070

Quoins & Keys - Quoins are available in3”, 6”, 9” and 12” lengths.

Torque Key -Prevents damage to quoinsfrom over-tightening.Part # 3330104. Replace-ment shank Part # 3330105

Mini Quoin & Hex Key -2” long, 5/8” tall, features a 6mm hex locking mechanism.Mini Quoin Part # Z315023T-Handle Key Part # Z315024

Steel Stop Pins -Precision ground to help protect steel rule dies fromdamage.

Wagner can supply OEM parts and supplies for Bobst autoplaten presses:

• Thin Plates• Stripping & Blanking As well as components

for Martin Rotary presses like DRO hoops.

D I E C U T T I N G & M A K E R E A D Y

Toggle Hooks - Used to hold embossing and foilstamping dies onto honey-comb chase plate.

Wagner also carries:• Skiveready knives• Score cutters• Sample-making tools• Counterboard



Press Suckers -Available for diecutting andprinting presses of allmakes.

16

D I E R O O M E Q U I P M E N T

For over 20 years, Wagner’s Extractor 2000has led the way in safe rule pulling. Extractors pull rule straight up, with up to600 lbs. of reliable pulling power! Keepsknuckles safely away from sharp rule edges!

ONLY Wagner Extractor 2000 features:

• Quality USA-Designed & Manufactured components

• Improved jaw locating system

• A full set of pins for easy configuration

• A set of Urethane pads for use on complex die layouts

• Replaceable jaws - in standard and narrow versions - Genuine WagnerReplacement Jaws fit all ExtractorModels!

StandardJaws

NarrowJaws

Wagner Extractor 2000: The True Blue Original is Still the Best!

Helmold E-Z Bendall -Also available in Standard,Heavy Duty models.Part # X114917

Helmold Cutter -Models are available forcutting rule up to 1-1/2”, 2-1/8” or 2-7/8” in height.

Rotary Miter Knives -for 1-1/2” model Helmold Cutter.Part # Z ROT KNI B

Replacement Blades &Knives - Helmold cutters,notchers & miters. Wagner canprovide sharpening or retipping.

Helmold StandardNotcher - Many notchsizes available.

Helmold Miter - Single miter or right andleft hand miter.

Helmold Heavy Duty -2 & 4-hole Notchers, alsoavailable in E-Z model, re-placement blades available.

Helmold Cutawl Saw -for Flat and Rotarydieboards. Blades also available, see page 7.

Curver/Flattener Tool -for rotary rule.Part # 4 3466

Wagner Extractor 2000 - with Pins and Urethane Pads.

Wagner Knifing Table -Feature rugged constructionwith a 48” x 48” specially-ground top. Part # W48X48WT

Wagner work bench -With MDF counters readyfor equipment & peg boardbacker for tool organization.

Wagner KnifingTables and Work Benches are in limited supply, please contact us for availability!


Part # WWPULLER

17

H E N D E R S O N S T O R A G E S Y S T E M S

Storage Systems -For 5/8” and 3/4” dieboards,stripping and blanking tooling.

Easi-Hanger Blanking System Hanger Brackets.

Rotary Die Storage System and Rotary Transfer Cart

Mounted and UnmountedPrinting Plate Storage -Hooks are also available separately.

Litho Plate Storage -Hooks are also available separately.

Flat Die Storage Pins -1/8” pin for 5/8” wood, 3/16” pin for3/4” wood.

Rotary Die Storage - For DRO Rotary Dies.

Rotary Die Storage - For EVOLRotary Dies.

Printing Plate Transfer Cart Ink Storage Units

Flat Die Transfer Cart

Custom Storage Systems can also be designed and manufactured upon request.


2041 Elm Court, Ontario, CA 91761

Toll-Free (800) 423-4478Local: (909) 947-3044 • Fax: (909) 923-7809

2532 Converse Street, Dallas, TX 75207


960 Industrial Drive, Unit 8, Elmhurst, IL 60126


W E S T C O A S T

S O U T H W E S T

M I D W E S T

www.wagnerdiesupply.com

America’s Die Supply Leader.Celebrating over seven decades of service.

For the latest information and updates, please visit our website at:

For Information and Sales via email for all locations:[email protected]

Documents

SUPPLIES FOR THE STEEL RULE DIE INDUSTRY · 3 STEEL RULE Cutting Rule Profiles available in ground or shaved edge in several bevel angles. Creasing Rule Profiles designed to make