Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Propellers Sterngear Couplings Bearings Shafts Seals
Suppliers & Manufacturers of OVER
2,000
PROPELLERS
IN STOCK
MARINEPROPULSION
MarinePropulsionSystems
2014
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2014
Anodes 12
Brass Key Material 12
Brass Tube 12
Couplings R & D 15
Cuttless Bearings 4
Engine Mounts R & D 15
Fasteners & Fixings Misc. 13
Gori Propellers - see propellers 10 & 11
GRP Tube 12
Inboard Bearing Flexible glands 5
Inboard Bearing Rigid glands 5
Inboard Flange for PSS/Tides Seal etc. 5
Other Products 22
Outboard Bearing Water Scoop 5
P Brackets - Radice 5
Plant list 24
Prop Protector, Rope and Weed Cutter 18
Propeller Shafts 1
Propeller Sizing & Order Form 23
Propellers Fixed Blade Bronze - Radice 6 & 7
Propellers Folding 2 & 3 Blade - Gori 10 & 11
Propellers Folding 2 Blade - Radice 9
Propellers Saildrive 2 & 3 Blade Aluminium - Radice 8
Propellers Stern Drives 3 Blade Aluminium - Radice 8
P.S.S. Shaft Seals 17
R and D Marine Products 15
Radice Propellers - see propellers
Rudders - Radice 14
Shaft Couplings 15
Shaft Logs - Radice 14
Shaft Nuts 13
Shaft Seal PSS 17
Shaft Seal - RMTA Radice 16
Shaft Seals - Tides Marine "Series One" 16
Steering Wheels 20 & 21
Stern Gland Lubricators 13
Stern Gland Packing 13
Stern Tube Complete Assemblies 2 & 3
Stern Tube Components 5
Teleflex Morse Controls 19
Tides Marine Shaft Seals 16
Yanmar Sail Drive Propeller Fastenings 13
Engineering Facilities 24
How to Contact Us
How to Find Us
Payment Details
Plant list 24
Terms and Conditions - Key points Inside Back Cover
Back Cover
Inside Back Cover
6 & 7 & 8 & 9
Inside Back Cover
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 1
Propeller Shafts
IMPERIAL SHAFTS: Based on 3ft/ 914 mm overall length 'L', includes Key, BSF, Nut & Split Pin:
SHAFT Dimensions in inches
dia 'd'
h i k
3/4" 1 3/4" 1" .188
7/8" 1 7/8" 1" .188
1" 2 1/8" 1 1/4" .250
1 1/8" 2 3/8" 1 1/4" .250
1 1/4" 3" 1 1/4" .313
1 1/2" 3 1/8" 1 3/8" .375
1 3/4" 4 1/4" 1 7/8" .438
2" 4 7/8" 2 3/4" .500
2 1/4" 5 1/4" 2 3/8" .625
2 1/2" 5 3/4" 2 3/4" .625
2 3/4" 6 3/4" 2 3/4" .750
3" 7 3/4" 2 3/4" .750
METRIC SHAFTS: Based on 1000 mm overall length'L'. Includes Key, Metric Nut and Split Pin
SHAFT Dimensions in mm
dia 'd'
h i k
20mm 45 25 6
22mm 47 25 6
25mm 55 25 6
30mm 75 30 8
35mm 85 35 10
40mm 95 35 12
45mm 105 40 14
50mm 115 45 14
Fitting a 1/2 coupling is extra.
The above prices are for shafts up to 3 mtrs/10 ft: Longer lengths subject to individual quotation, as are,
different tapers and special requirements. Sizes and specifications may vary, surcharges may apply,
check when ordering.
DUPLEX STAINLESS is also available giving 30% increase in tensile strength over 316,
Available in 1", 1 1/4", 1 1/2", 1 3/4" & 2" diameter, adadd 15% to above prices
Metric sizes may be available check when ordering.
Enables smaller sterngear to be fitted,
in some cases, with cost
saving overall.
Boxes can be supplied for transit/export on request.
Mild steel intermediate shafts are available to customer specifications.
Note All above prices are based on current costs, these may be amended in the case of escalating
material prices, please check before ordering.
POA = Price on application.
Cost of keying parallel shaft and supply parallel key 3/4"/20mm to 1 1/2"/35mm. Shaft dia - extra £35.00
1 3/4"/40mm to 2"/50mm. Shaft dia - extra £50.00
£100.00
£110.00
£120.00
£130.00
£36.00
£37.00
£55.00
£57.00
£12.00
£16.00
£16.00
£25.00
£70.00
£70.00
£70.00
£85.00
£260.00
£340.00
£370.00
£130.00
£145.00
£145.00
£200.00
£245.00
£85.00
£105.00
£120.00
£130.00
£70.00
£70.00
£70.00
£75.00
£265.00
£320.00
£13.00
£15.00
£18.00
£19.00
£23.00
£37.00
£44.00
£POA
£POA
EXTRA FOR
EXTRA PER
6 Inches/152mm
£135.00
£145.00
£145.00
£175.00
£190.00
TAPER
TAPER
1 IN 10
SINGLE
TAPER
1 IN 12
SINGLE
£380.00
£472.00
£POA
£150.00
£POA
£POA
£POA
£75.00
£POA
£POA
£POA
Our propeller shafts are manufactured from bright ground 316 grade stainless steel and can be supplied in
any metric or imperial size up to 3" or 50mm diameter. These shafts can be machined with either 1:10,
1:12 or 1:16 tapers. They are supplied with key, nut and split pin ready for installation. We can also
supply shafts in 304 grade stainless steel, and Duplex. 'The prices are for 316 grade shafts: 1:14 and 1:20
tapers are available with £20 net surcharge. Specify diameter 'd' overall length 'L' and taper requirements
when ordering.
EXTRA PER
15O mm
UP TO 10 ft O/A
EXTRA FOR
DOUBLE
TAPER
DOUBLE
£58.00
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 20142
TYPE 1Water scoop outboard bearing, brass tube, fixed flange inboard, nut type traditional gland. (Stud type over 1 3/8” 135mm)
TYPE 3Water scoop outboardbearing, brass tube, inboard mounting flange, flexible inboard bearing, nut type traditional gland. PSS seal or Tides Marine seal (Stud type over 1 3/8” 135mm)
TYPE 4Plain Epoxy Glass tube & flexible nut type traditional gland or PSS seal or Tides Marine seal.(Stud type over 1 3/8” 135mm) ‘P’ Strut and cutless bearing (see separate listing for further detail) can be used with ‘A’ bracket etc.
TYPE 5 Epoxy Glass tube with cutless bearing outboard, flexible in-board bearing and nut type tradi-tional gland or PSS seal or Tides Marine seal.(Stud type over 1 3/8” 35mm)
HOW TO ORDER YOUR STERN TUBE ASSEMBLY
1. Select the stern tube assembly from types 1, 3, 4 & 5.2. Specify shaft diameter ‘d’.3. Specify length ‘B’.4. Specify length ‘A’ if different to standard, see table on page 3.5. Specify PSS seal, Tides Marine seal or traditional type gland as drawn below.
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 3
'B'
'd' A C D E
'B'
'B'
A C2 D E
B
'B'
C1 D F
B
'B'
C1 D
'B'
'B'
TYPE 1
TYPE 3
TYPE 4
'B'
'B'
TYPE 5
STERN TUBE ASSEMBLIES
'B'
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 20144
Shaft Shell Length Brass Non Metalic Shaft Shell Length Brass Non Metalic
Diameter Diameter Price Price Diameter Diameter Price Price
3/4" 1 1/4" 3" £31.00 £19.00 20mm 35mm 80mm £37.00 £26.00
7/8" 1 1/4" 3 1/2" £41.00 £25.00 22mm 35mm 88mm £37.00 £25.00
7/8" 1 3/8" 3 1/2" £37.00 £25.00 25mm 40mm 100mm £31.00 £26.00
7/8" 1 1/2" 3 1/2" £46.00 £25.00 30mm 40mm 120mm £42.00 £28.00
1" 1 1/4" 4" £32.00 £20.00 30mm 45mm 120mm £37.00 £33.00
1" 1 3/8" 4" £37.00 £25.00 35mm 50mm 140mm £43.00 £36.00
1" 1 1/2" 4" £31.00 £26.00 40mm 55mm 160mm £54.00 £40.00
1" 1 7/8" 4" - £35.00 45mm 65mm 180mm £73.00 £60.00
1 1/8" 1 1/2" 4 1/2" £47.00 £27.00 50mm 70mm 200mm £85.00 £63.00
1 1/8" 1 5/8" 4 1/2" £39.00 £29.00 55mm 75mm 220mm £100.00 £68.00
1 1/8" 1 3/4" 4 1/2" £44.00 £28.00 60mm 80mm 240mm £119.00 £81.00
1 1/8" 1 7/8" 4 1/2" - £45.00 65mm 85mm 260mm £137.00 £55.00
1 1/4" 1 3/4" 5" £37.00 £35.00 70mm 90mm 280mm £134.00 £83.00
1 1/4" 2" 5" £44.00 £36.00 75mm 95mm 300mm £170.00 £93.00
1 3/8" 1 7/8" 5 1/2" £49.00 £30.00
1 1/2" 2" 6" £48.00 £38.00
1 1/2" 2 3/8" 6" £77.00 £38.00
1 5/8" 2 1/8" 6 1/2" £79.00 £47.00
1 3/4" 2 3/8" 7" £71.00 £56.00
1 3/4" 2 5/8" 7" £72.00 £63.00
2" 2 5/8" 8" £77.00 £61.00
2" 2 3/4" 8" £104.00 £68.00
2" 3" 8" £111.00 £71.00
2 1/4" 3" 9" £100.00 £71.00
2 1/4" 3 1/8" 8" £120.00 £72.00
2 1/2" 3" 10" £114.00 £75.00
2 1/2" 3 1/4" 10" £124.00 £81.00
2 3/4" 3 1/2" 11" £140.00 £72.00
3" 3 3/4" 12" £176.00 £89.00
3" 4" 12" £197.00 £135.00
Shaft Shell Length Brass Non Metalic Shaft Housing Length Price
Diameter Diameter Price Price Diameter Diameter
20mm 1 1/4" 76mm £39.00 £20.00 22mm 29mm 75mm £20.00
22mm 1 1/4" 88mm £39.00 £25.00 22mm 36mm 75mm £21.00
22mm 1 3/8" 88mm £42.00 £35.00 25mm 34mm 55mm £21.00
25mm 1 1/4" 100mm £41.00 £25.00 25mm 36mm 100mm £22.00
25mm 1 3/8" 100mm £37.00 £26.00 25mm 40mm 100mm £23.00
25mm 1 1/2" 100mm £34.00 £28.00 25mm 40mm 120mm £24.00
30mm 1 3/4" 120mm £37.00 £30.00 30mm 40mm 100mm £25.00
35mm 1 7/8" 140mm £40.00 £39.00 30mm 40mm 120mm £26.00
40mm 2 1/8" 165mm £54.00 £43.00
45mm 2 3/8" 178mm £71.00 £48.00 Shaft Shell Length Price
50mm 2 5/8" 203mm £76.00 £60.00 Diameter Diameter
25mm 34mm 60mm £33.00
1" 34mm 60mm £33.00
Other sizes are available both in imperial and metric.
Detail and price on request.
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 5
INBOARD FLANGE FOR PSS/TIDES SEAL ETC. To order, advise "d" and any special requirements
shaft range "d" inside dia. "C" as std. std. tube dia. "D" "E" std. bolt Std. Price
of your hose thread 12 t.p.i centres
7/8" to 1 1/8" 1 1/4" to 1 3/4" 3 3/8" 1 1/2" 4" £150.00
22mm to 28mm
1 1/4" to 1 1/8" 1 3/4" to 2 1/4" 3 1/2" 1 3/4" 4 1/2" £195.00
30mm to 35mm
1 1/2" to 1 3/4" 2 1/2 to 3 1/8" 2 5/8" 2" or 2 1/4" 4 holes 4 1/2" PCD £170.00
40mm to 45mm flat back round flange
RIGID INBOARD GLANDTo Order: for shaft "C" as std. std. tube dia. "D" "E" std. bolt Std. Price
Select shaft dia. dia. "d" thread 12 t.p.i centres
and any
non-standard 7/8" to 1" 3 1/4" 1 1/2" 4" £240.00
requirements 22mm to 25mm
1 1/8" to 1 3/8" 3 1/2" 1 3/4" 4" to 4 1/2" £280.00
28mm to 35mm
1 1/2" & 40mm 3 1/2" 2" 4 holes 4 1/2" PCD £365.00
round flange
1 3/4" & 45mm 3 1/2" 2 1/2" 4 holes 4 1/2" PCD £410.00
round flange
FLEXIBLE INBOARD GLAND with nut type gland (stud type over 1 3/8" / 35mm)
To Order for shaft approx "C" standard "D" Price
specify "d" dia. "d"
shaft dia. and
confirm "D" 3/4" / 20 5" / 127 1 1/4" / 32 - 2" / 51 £200.00
7/8" / 22 5" / 127 1 1/2" / 38 - 2" / 51 £200.00
1" / 25 5" / 127 1 1/2" / 38 - 2" / 51 £200.00
1 1/8" / 28 5" / 127 1 1/2" / 38 - 2" / 51 £215.00
1 1/4" / 30 1 3/8" /35 6" / 125 1 3/4" / 43 - 2 1/4" / 58 £260.00
1 1/2" / 40 7" / 178 2" / 51 - 2 1/2" / 64 £405.00
1 5/8" or 1 3/4" / 45 7" / 178 2" / 51 - 2 1/2" / 64 £470.00
WATER SCOOP OUTBOARD BEARING (Cutless fitted)
To Order for shaft standard std. tube dia. "D" "E" std. bolt Std. Price
specify "d" dia. "d" length "A" thread 12 t.p.i centres
shaft dia. and
see NOTE* 7/8" / 22 4 1/2" / 144 1 1/2" / 38 4" / 102 £250.00
1" / 25 5" / 125 1 1/2" / 38 4" / 102 £250.00
1 1/8" / 28 5 1/4" / 135 1 3/4" / 45 4" / 102 £260.00
1 1/4" / 30 - 1 3/8" 35 6" / 150 1 3/4" / 45 4 1/2" / 114 £270.00
1 1/2" / 40 7" / 178 22 / 51 5" / 127 £385.00
1 5/8" or 1 3/4" / 45 7 1/2" 188 2 1/4" / 57 5" / 127 £405.00
GLASS-IN "P" BRACKETS
for shaft length "J" Price
dia. "d"
3/4" / 20 10" / 250 £210.00
7/8" / 22 16" / 400 £225.00
1" / 25 16" / 400 £230.00
1 1/8" / 28 16" / 400 £235.00
1 1/4" / 30 16" / 400 £315.00
1 3/8" / 35 18" / 450 £420.00
1 1/2" / 40 18" / 450 £500.00
1 3/4" / 45 22" / 550 £750.00
2" / 50 22" / 550 £875.00
Note: All prices are based on current costs, these may be ammended in the case of escalating material prices, please check before ordering.
Stuart copy casting option - used as inboard flange £150.00 / used as outboard bearing housing with cutless £230.00
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 20146
RADICE BLADE PROFILES
complete RangeELICHE RADICE S.p.A.
To calculate Blade Width where “D” is Diameter and “H” is Blade Width
H = D x factor shown against each blade type & propeller model
H = 0.376 of Prop. Dia.
Propellers
E13 - 3 blade
B7 - 4 blade
H = 0.311 of Prop. Dia.
Propellers
E12 - 3 blade
B6 - 4 blade
A3 - 5 blade
H = 0.352 of Prop. Dia.
Propellers
K3/50 - 3 blade
K4/67 - 4 blade
H = 0.306 of Prop. Dia.
Propellers
K3/42 - 3 blade
K4/56 - 4 blade
H = 0.423 of Prop. Dia.
Propellers
S8 - 4 blade
H = 0.430 of Prop. Dia.
Propellers
S9 - 5 blade
H = 0.611 of Prop. Dia.
Propellers
D10 - 3 blade
H = 0.436 of Prop. Dia.
Propellers
C7 - 3 blade
C8 - 4 blade
C9 - 5 blade
H = 0.376 of Prop. Dia.
Propellers
K11 - 2 blade
H = 0.250 of Prop. Dia.
Propellers
M12 - 2 blade
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 7
ELICHE RADICE S.p.A.
2 & 3 Blade Bronze Propellers
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
Diameter 2 BLADE SAILING 2 BLADE TURBINE 3 BLADE, FINE 3 BLADE STANDARD 3 BLADE EQUIPOISE
TYPE M12:0.23 TYPE K11:0.34 TYPE E12:0.43 TYPE E13:0.52 TYPE C7:0.55
10" 254mm - - - °£215.00 -
11" 279mm - - - °£215.00 -
12" 305mm °£215.00 °£215.00 °£215.00 °£225.00 -
13" 330mm £230.00 £230.00 £255.00 £275.00 -
14" 356mm £240.00 £240.00 £270.00 £285.00 -
15" 381mm £245.00 £245.00 £280.00 £290.00 -
16" 406mm £290.00 £290.00 £300.00 £325.00 £375.00
17" 432mm - £300.00 £325.00 £350.00 £395.00
18" 457mm - £330.00 £340.00 £375.00 £485.00
19" 483mm - - - £420.00 -
20" 508mm - - - £460.00 £575.00
21" 533mm - - - £565.00 -
22" 559mm - - - £710.00 £755.00
Propeller
Blade
Style
Prices include standard taper boring & keyslot 1 in 10, 1 in 12 & 1 in 16 only 1 in 14 & 1 in 20 £20 net surcharge.
Availalable in left & right hand & full range of popular pitches (pilot bore less £50 up to 17" and £60 above 17").
Sillette stock range M12 - 12" to 16" Dia: K11 - 12" to 18" Dia: E12 - 12" to 18" Dia in righthand
E13 - 10" to 22" Dia, C7 - 16" to 22" Dia:°Propellers may not be of Radice origin or specification.(° See Above)
Propeller material ot/man, specially formulated for Eliche Radice
It has good strength charactaristic and a good resistance to corrosion.
Copper 53/56% Manganese 1.8/2.4% Nickel 1.5/2.0%
Mechanical restistance R > 535 N/mm², yield strength > 220N/mm², elongation > 25%
In most cases it is not necessary to specify mibral (Nickel Aluminium Bronze) which would add 30% to above prices.
When ordering please specify following dimensions for bore & keyslot and confirm if they relate to propeller hub or shaft
for folding propellers also specify thread ie.¾" BSF - M16 x 1.5 pitch etc
Propellers correctly supplied to your order are not returnable.
The Radice Company, established in 1919 has always been one of the most advanced in designing and
manufacturing any type of propeller, from small outboard propellers to ship's propellers up to 4 mtr in diameter.
Due to their policy of continuous development, specification may change without prior notice, please check
when ordering. Prices subject to change without notice.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 20148
Stern Drive Propellers
Sail Drive Propellers
For, ENFIELD 130, SONIC, PERKINS, TRANSADRIVE,
& VOLVO 80.88. Sterndrives
13" Dia x 8" PITCH, L OR R £145.00 14" Dia x 9" PITCH, L OR R £145.00
13" Dia x 9" PITCH, L OR R £145.00 14" Dia x 10" PITCH, L OR R £145.00
13" Dia x 10" PITCH, L OR R £145.00 14" Dia x 11" PITCH, L OR R £145.00
13" Dia x 11" PITCH, L OR R £145.00 14" Dia x 12" PITCH, L OR R £145.00
13" Dia x 12" PITCH, L OR R £145.00 14" Dia x 13" PITCH, L OR R £145.00
13" Dia x 13" PITCH, L OR R £145.00 14" Dia x 14" PITCH, L OR R £145.00
13" Dia x 14" PITCH, L OR R £145.00
All 3 blade Aluminium for .80"/20.5mm Dia 12 Spline involute prop shaft.
RETAINING CONE, TAB WASHER AND SPACER FOR ABOVE set £45
For, VOLVO AQUAMATIC 100 - 110 - Pin drive
14" DIAMETER, PITCHES 10", 11", 12", 13" & 14" L or R £185.00
For, ENFIELD 200, SONIC 250, TRANSADRIVE 220,
& VOLVO AQUAMATIC 200.250.270.280.
14" DIAMETER, PITCHES 9" TO 17" left or right hand rotation £190.00
15" DIAMETER, PITCHES 9" TO 17" left or right hand rotation £200.00
16" DIAMETER, PITCHES 12", 14", 16" & 18" left or right hand rotation £210.00
All 3 blade Aluminium for 1.100"/28mm Dia 17 Spline involute prop shaft, standard hub length
Retaining cone and Tab washer for above - Sillette type £45.00
Adaptor to convert 12 Spline Shafts to 17 Spline £75.00
For, BUKH, YANMAR, NANNI, VOLVO & SONIC.
Sail Drives, 2 Blade. 17 Spline. 28mm Shaft
14" DIAMETER, PITCHES 7", 8", 9" & 10" left hand rotation £190.00
15" DIAMETER, PITCHES 10", 11" & 13" left hand rotation £200.00
16" DIAMETER, PITCHES 11" & 13" left hand rotation £210.00
17" DIAMETER, PITCHES 12" & 14" left hand rotation £220.00
18" DIAMETER, PITCH 10" & 12" left hand rotation £270.00
Sail Drives, 3 Blade. 17 Spline. 28mm Shaft
12" DIAMETER, PITCH 8" (BUKH DVIOLSME- 6 spline) right hand rotation £240.00
14" DIAMETER, PITCHES 9", 10", 11" & 12" left hand rotation £235.00
15" DIAMETER, PITCHES 11", 12" & 13" left hand rotation £245.00
16" DIAMETER, PITCHES 11" & 12" left hand rotation £250.00
17" DIAMETER, PITCHES 11", 12", 13", 14", 15" & 16" left hand rotation £275.00
18" DIAMETER, PITCHES 15" & 16" left hand rotation £340.00
LOMBARDINI / SELVA Sail Drive, 3 Blade
14" DIAMETER, PITCHES 8", 9", 10", 11" & 12" £270.00
Cone Kit inc, tab washer and spacer for Yanmar, Sillette type, specify M16 or M20 £65.00
Spacer for Yanmar Saildrives, use with Sillette Cone & Tab Washer as spare part £27.00
Cone Kit with centre bolt Volvo type 850396 £81.00
Radice propellers are pitch checked and balanced during manufacture, samples are also subjected to
destructive testing to ensure material consistency and correct functioning of the cushioned hub.
Propellers correctly supplied to order are not returnable.
ELICHE RADICE S.p.A
Reference to inch sizes in this price list is for Part No. identification purposes.
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
right hand rotation
net only
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 9
2 Blade Folding Propellers
TAPER FITTING SHAFT PROPELLERS2 BLADE
Available for left or right hand rotation FOLDING
Bored & keywayed to standard 1:10, 1:12 or 1:16 tapers. (1:14 and 1:20 £20 net extra)
For use with propeller shaft diameters, 19 to 25 mm - 3/4" to 1"
12" Diameter x pitches 8" or 10" £510.00
13" Diameter x pitches 7", 8", 9" 10" or 11" £455.00
For use with propeller shaft diameters 22 to 25 mm 7/8 to 1"
14" Diameter x pitches 8", 9", 10" or 11" £520.00
15" Diameter x pitches 9", 10", 11", 12" or 13" £535.00
For use with propeller shaft diameters 25 to 35 mm - 1" to 1 3/8"
16" Diameter x pitches 10", 11", 12" or 13" £580.00
17" Diameter x pitches 10", 11", 12", 13" or 14" £640.00
For use with propeller shaft diameters. 30 to 40mm - 1 1/8" to 1 1/2"
18" Diameter x pitches 12", 13" or 14" £720.00
Pilot bored less £60 on above prices
Non standards tapers subject to individual quotation
Pitch availability quoted is for 2 blade.
SPLINE FITTING SAILDRIVE PROPELLERS
For Volvo 110's, Volvo 120's, Yanmar, Bukh, Nanni & Sonic Saildrives
13" Diameter x pitch 7", 8" or 9" Left hand £480.00
14" Diameter x pitch 7", 8", 9" or 10" Left hand £530.00
15" Diameter x pitch 9", 10", 11", 12" or 13" Left hand £545.00
16" Diameter x pitch 10", 11" or 13" Left hand £575.00
17" Diameter x pitch 10" or 13" Left hand £635.00
18" Diameter x pitch 11" or 12" Left hand £700.00
19" Diameter x pitch 12" Left hand £775.00
SPLINE FITTING SAILDRIVE PROPELLERS, for Lombardini-Selva
14" Diameter x pitch 8", 9" or 10" Right hand £545.00
15" Diameter x pitch 9", 10", 11" or 12" Right hand £555.00
16" Diameter x pitch 10", 11", 12" or 13" Right hand £575.00
For pitch and diameter recommendations forward full detail engine, reduction ratio and hull.
All reference to inch sizes on this list is for part identification purposes.
SPARE PARTS
Pivot pin retaining screw M8 x 30 or 35 (Grani Inox 01/4453/2D) £7.00
Nut side locking screw M8 x 16 (Grani Inox 5927) £2.00
Pivot pin L64 D14mm (Perni Inox 01/4497/4) £10.00
Nut, special nyloc SD M16 (Ogiva Fol 01606/078) £8.00
Nut, shaft propellers std type tapped as required £50.00
Nut, new SD type M16 £50.00
Spare blades 60% of propeller costs
Taper Shaft hub including boring. M1 & M2 (M3 add £35) £310.00
Yanmar, Volvo, Bukh SailDrive hub £325.00Propeller extractor for tapered shaft 2BL Small £28.00 Large £37.00
Propellers & spare parts correctly supplied to your order are not returnable.
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
ELICHE RADICE S.p.A.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201410
QUALITY
FOLDING
PROPELLERS
Standard Shaft Propellers, 2 Blade foldingAvailable for left or right hand rotation, except where shown.
Bored and keywayed to standard 1:10, 1:12 or 1:16 - Non standard tapers subject to individual quotation.
11 1/2" Diameter x 8" Pitch (9 1/2" Pitch in RH only) £620.00
12 1/2" Diameter x 8" Pitch RH Only £630.00
13" Diameter x 9" Pitch £640.00
14" Diameter x 9 1/2" Pitch £650.00
15" Diameter x 10" Pitch £665.00
15" Diameter x 12" Pitch £665.00
16 1/2" Diameter x 11" Pitch £720.00
16 1/2" Diameter x 13" Pitch £720.00
18" Diameter x 13" Pitch also 15" Pitch. RH only £775.00
PILOT BORED - LESS £60 ON ABOVE PRICES.
NON STANDARD TAPERS SUBJECT TO INDIVIDUAL QUOTATION.
CUSTOMISED DIAMETER & PITCH QUOTED ON REQUEST.
Standard Shaft Propellers, 3 Blade foldingSHAFT INSTALLATION
NEW - INTEGRATED HUB ANODE SUPPLIED AT NO EXTRA COST, SUBJECT TO REQUEST WHEN ORDERING
Bored and keywayed 1:10 - 1:12 - 1:16 - Non standard tapers subject to individual quotation.
14" Diameter x 9", 10", 11" or 12" Pitch RH/LH £1,850.00
15" Diameter x 9", 10", 11" or 12" Pitch RH/LH £1,850.00
16 1/2" Diameter x 10", 11", 12" or 13" Pitch RH/LH £1,950.00
18" Diameter x 11", 12", 13" or 14" Pitch RH/LH £2,400.00
20" Diameter x 12", 13", 14", 15" or 16" Pitch RH/LH £2,500.00
22" Diameter x 13", 14", 15", 16" or 17" Pitch RH/LH £3,100.00
24" Diameter x 15", 16", 17", 18" or 19" Pitch RH/LH £3,350.00
26" Diameter x 16", 17", 18", 19", 20" or 21" Pitch RH/LH £3,750.00
28" Diameter x 17", 18", 19", 20", 21" or 22" Pitch RH/LH £6,550.00
30" Diameter x 18", 19", 20", 21", 22", 23" or 24" Pitch RH/LH £6,850.00
Standard Shaft Propellers, 4 Blade folding NEWSHAFT INSTALLATION
NEW - INTEGRATED HUB ANODE SUPPLIED AT NO EXTRA COST, SUBJECT TO REQUEST WHEN ORDERING
Bored and keywayed 1:10 - 1:12 - 1:16 - 1:20 - Non standard tapers subject to individual quotation.
22" Diameter x 13", 14", 15", 16" or 17" Pitch RH/LH P.O.A.
24" Diameter x 15", 16", 17", 18" or 19" Pitch RH/LH P.O.A.
26" Diameter x 16", 17", 18", 19", 20" or 21" Pitch RH/LH P.O.A.
28" Diameter x 17", 18", 19", 20", 21" or 22" Pitch RH/LH P.O.A.
30" Diameter x 18", 19", 20", 21", 22", 23" or 24" Pitch RH/LH P.O.A.
32" Diameter x 19", 20", 21", 22", 23", 24" or 25" Pitch RH/LH P.O.A.
34" Diameter x 20", 21", 22", 23", 24", 25" or 26" Pitch RH/LH P.O.A.
36" Diameter x 21", 22", 23", 24", 25", 26" or 27" Pitch RH/LH P.O.A.
38" Diameter x 23", 24", 25", 26", 27", 28", 29" or 30" Pitch RH/LH P.O.A.
Racing Series Propellers, 2 Blade foldingFOR HYDRODRIVE, SHAFT FITTING AND SAILDRIVE LH OR RH
375 Diameter for 30-40 ft - 3/4 tonner - 260 Pitch £1,270.00
380 Diameter for 30-40 ft - 3/4 tonner - 265 Pitch (LH only) £1,270.00
425 Diameter for 35-45 ft - 1 tonner - 300 Pitch £1,310.00
475 Diameter for 40-50 ft - 2 tonner - 330 Pitch £1,435.00
530 Diameter for 50 footer and Whitbread 60 - 370 Pitch £1,580.00
750 Diameter for Maxi Raters (also 680mm for Hydrodrive) RH P.O.A.
Actual propeller size depends on boat and engine installation, custom made propellers available.
For pitch and diameter recommendations, enter calculation details on Gori website.
www.gori-propeller.dk or complete, the Sillette order/enquiry form
P.O.A. - Price on application
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 11
QUALITY
FOLDING
PROPELLERS
Sail Drive Propellers, 2 Blade folding with cushioned hub
11 1/2" Diameter x 8" Pitch RH for Volvo 50S £700.00
11 1/2" Diameter x 8" Pitch RH for BUKH DV8SME £695.00
11 1/2" Diameter x 9 1/2" Pitch RH for BUKH DV10LSME £695.00
12" Diameter x 8" Pitch RH for BUKH DV10LSME £700.00
For VOLVO 110S, VOLVO 120S, YANMAR, BUKH, SONIC & LOMBARDINI - 17 spline. With anode fitted.
For VOLVO 100S add £50 to the following prices. Propeller fits with 10-15mm gap.
13" Diameter x 9" Pitch - LH £815.00
14" Diameter x 9 1/2" Pitch - LH £830.00
15" Diameter x 10" Pitch - LH ALSO 11" & 12" Pitch £840.00
16 1/2" Diameter x 11" Pitch - LH ALSO 13" Pitch available £850.00
18" Diameter x 11" Pitch - LH £875.00
18" Diameter x 12" Pitch - LH £875.00
18" Diameter x 14" Pitch - LH £875.00
Sail Drive Propellers, 3 Blade folding with cushion hubStandard 17 spline fitting with replaceable cushioned hub and anode protection.
For VOLVO, YANMAR, BUKH, SONIC & LOMBARDINI - 17 spline.
15" Diameter x 9", 10", 11" or 12" Pitch LH standard (RH optional) £1,920.00
16 1/2" Diameter x 10", 11", 12" or 13" Pitch LH standard (RH optional) £1,995.00
18" Diameter x 11", 12", 13" or 14" Pitch LH standard (RH optional) £2,440.00
20" Diameter x 12", 13", 14", 15" or 16" Pitch LH standard (RH optional) £2,570.00
Repairs and Spare Part Prices for 2 Blade Folding Propellers
Replacement blades for existing propeller - subject to availability 60% of propeller price
Replacement hub with standard bore - subject to availability 60% of propeller price
Replacement hub for saildrive propellers 60% of propeller price
Revulcanisation of existing saildrive hub (includes carriage to Denmark) £315.00
Pivot pin retaining screws M8 pointed £2.00
Pivot pins (specify size when ordering) (1 pair) £56.00
Split pin for Saildrive prop £2.00
Collar nut for Saildrive prop, new method - M16 or M20 x 2 mm pitch £56.00
Nut, Shaft Propellers Std. Type Tapped as required each £51.00
Nut, Shaft 3 Blade Propeller 18" - 20" £78.00
Propeller extractor from tapered shaft 2 bl Small, £28 Large, £37.00
Spare Part Prices for 3 Blade Folding Propellers - Shaft and saildrive types
Triangular Anode and Stops 15" - 16 1/2" - 3 BLADE £52.00
Triangular Anode and Stops 18" - 20" - 3 BLADE £52.00
Triangular Anode and Stops 22" - 26" - 3 BLADE £52.00
Triangular Anode and Stops 28" - 30" - 3 BLADE £80.00
Triangular Anode 15" - 16 1/2" - 3 BLADE £22.00
Triangular Anode 18" - 20" - 3 BLADE £22.00
Triangular Anode 22" - 26" - 3 BLADE £22.00
Triangular Anode 28" - 30" - 3 BLADE £30.00
Hub Anode 12 1/2" - 18" - 2 BLADE SAILDRIVE PROPELLER £47.00
Hub Anode 15" - 16 1/2" - 3 BLADE Specify saildrive or shaft propeller £47.00
Hub Anode 18" - 20" - 3 BLADE Specify saildrive or shaft propeller £47.00
Hub Anode 22" - 26" - 3 BLADE £60.00
Hub Anode 28" - 30" - 3 BLADE £74.00
All Anodes available in sets of 3, of same type, at stockholder discount price, (pay for 2 & receive 3)
Peek Bushes 15" - 20" - 3 Blade Saildrive Propeller each £42.00
Set Thrust Washers 15" - 26" 3 Blade set £26.00
Cushioned spline centre 15" - 20" - 3 BLADE SAILDRIVE PROPELLER, specify diameter £73.00
Hub extractor tool 15"/16 1/2" £47 18"/20" £57 22"/26" £74 28"/30" £85.00
C. spanner 15"/16 1/2" £27 18"/20" £35 22"/26" £55 28"/30" £74.00
Allen key set metric - ball end long series £18.00
NOTE All reference to inch sizes in the price list and various GORI MARINE brochures, is for part identification purposes,
although in most instances propeller sizes are identified by inch measurement, throughout the world.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201412
EPOXY GLASS TUBE Unmachined GRP tube in lengths of 4 ft / 1219 or less BRASS TUBE CZ121 or CZ126 depending on availability
Bore dia. Wall thick Price Outside dia. Wall Thickness
NB. 2 ft lengths 1 1/4" / 32 1/4" / 6.4 £115.00 1 1/2" / 38 1/8" / 32.25 10 SWG £35.00
charged at 1 3/8" / 35 3/16" / 4.8 £100.00 1 3/4" / 45 1/8" / 32.25 10 SWG £40.00
65% of 4 ft 1 1/2" / 38 1/4" / 6.4 £145.00 2" / 51 1/8" / 32.25 10 SWG £50.00
price up to 1 3/4" / 45 1/4" / 6.4 £160.00 2 1/2" / 64 1/8" / 32.25 10 SWG £75.00
1 3/4" bore 2" / 51 1/4" / 6.4 £185.00
2 1/4" / 57 1/4" / 6.4 £200.00
2 1/2" / 64 1/4" / 6.4 £225.00 or with standard thread each end add £45.00
BRASS KEY MATERIAL for propeller shafts, cut lengths
Square Square
3/16" £11.00 5mm £13.00
1/4" £13.00 6mm £14.00
5/16" £15.00 8mm £15.00
3/8" £20.00 10mm £20.00
7/16" £23.00 12mm £26.00
1/2" £24.00
STERN GLAND HOSE specifically for use with sterngear, oil & grease resistant, wall thickness between 8 and 10mm
Inside dia. Inside dia.
Available 1 1/4" / 32 £14.00 2" / 51 £24.00
in 1 3/8" / 35 £15.00 2 1/8" / 54 £25.00
these 1 1/2" / 38 £16.00 2 1/4" / 57 £30.00
sizes 1 5/8" / 41 £20.00 2 3/8" / 60 £32.00
1 3/4" / 45 £22.00 2 1/2" / 64 £33.00
1 7/8" / 48 £23.00 2 3/4" / 70 £38.00
ZINC COLLAR ANODE for limited shaft space STERNDRIVE ANODES - ZINC
Price Price
shaft dia 20mm £10.00
shaft dia 22mm £10.00
shaft dia 25mm £10.00
shaft dia 30mm £12.00
Volvo 250/270/275 £14.00
shaft dia 3/4" £10.00 Volvo 280 £20.00
shaft dia 7/8" £10.00 Enfield 130 Ring Anode £15.00
shaft dia 1" £10.00 Enfield 130 Block Anode £7.50
shaft dia 1 1/8" £12.00 Sonic Sterndrive Ring Anode £13.00
shaft dia 1 1/4" £13.00 Sonic Sterndrive Block Anode £7.00
ZINC SUPER SHAFT ANODES for use adjacent 'P' Brackets MAGNESIUM AND ZINC
shaft dia 3/4" (19mm) £25.00
shaft dia 7/8" (22mm) £25.00
shaft dia 25mm £28.00
shaft dia 1" £28.00
shaft dia 1 1/8" (28mm) £30.00
shaft dia 30mm £32.00
shaft dia 1 1/4" (31.7mm) £28.00
shaft dia 1 3/8" (35mm) £32.00
shaft dia 1 1/2" (38mm) £35.00
shaft dia 40mm £42.00
shaft dia 1 3/4" (44.4mm) £72.00 Cavitation Plate Anode Zinc £16.00
shaft dia 2" (50mm) £73.00 Cavitation Plate Anode Magnesium £16.00
ZINC SHAFT BARREL ANODE for general use SAILDRIVE ANODES - ZINC
shaft dia 3/4" (19mm) £12.00
shaft dia 7/8" (22mm) £10.00
shaft dia 25mm £10.00
shaft dia 1" £10.00
shaft dia 1 1/8" (28mm) £10.00
shaft dia 30mm £10.00
shaft dia 1 1/4" (31.7mm) £10.00
shaft dia 1 3/8" (35mm) £13.00
shaft dia 1 1/2" (38mm) £14.00
shaft dia 40mm £24.00
shaft dia 1 3/4" (44.4mm) £24.00 Volvo 110 Saildrive £22.00
shaft dia 45mm £24.00 Volvo 120 Saildrive £18.00
shaft dia 2" (50mm) £26.00 Yanmar SD20//30/40/50 - Kit £40.00
Price per 300mm
Price per 100mm Price per 100mm
Price per 300mm
Price per 300mm
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 13
Screw down type, all brass lubricator for stern tubes, rudder Price
bearings etc. Suitable for either vertical or horizontal mounting
Capacity 5 fl.oz
Dimensions: Base width 3 1/8" (80mm). Projection 2 3/4" (70mm)
Base height 1" (25mm). Outlet at base front 1/8" BSP threaded
Overall height extended 11" (288mm). Closed 7" (178mm) Lubricator only £49.00
LUBRICATOR KIT (Parts only)
Consisting of 2 x 1/8 BSP connectors, 1 x 1/4 BSP connector
and 3m nylon hose in polythene bag. Kit only £13.00
GREASE CUPS - Stauffors' type grease cups in hot stamped brass.
Type Male B.S.P. O.A. Dia Max Height (approx)
1 1/8" 29mm 40mm £9.00
4 1/4" 40mm 42mm £9.00
GREASE - Water resistant for sterngear etc. 500gm tub £5.00
STERN GLAND PACKING, manufactured from finest quality flax yarn blend.
Square
Available 1/8" / 3 £11.00
in 3/16" / 5 £13.00
these 1/4" / 6.5 £14.00
sizes 5/16" / 8 £16.00
3/8" / 9.5 £18.00
1/2" / 12.5 £21.00
SHAFT NUTS
Shaft nut with anode and tabwasher M16 x 1.5. Shaft size 25mm & 22mm £27.00
Shaft nut with anode and tabwasher M20 x 1.5. Shaft size 30mm £31.00
Shaft nut with anode and tabwasher M24 x 2. Shaft size 35mm £34.00
Shaft nut with anode and tabwasher M24 x 2. Shaft size 40mm £37.00
Shaft nut with anode and tabwasher M30 x 2. Shaft size 45mm £43.00
Shaft nut with anode and tabwasher M36 x 2 Shaft size 50mm £79.00
Spare anode for M16 or M20 nut £11.00
Spare anode for M24 nut. (Specify shaft size) £13.00
Spare anode for M30 nut £15. For M for M36 nut £22.00
Spare tabwasher for M16, M20 & M24 nut £4.00
Spare tabwasher for M30 & M36 nut £6.00
Slotted brass nuts 1/2", 5/8", 3/4" BSF, M16 x 1.5, M20 x 1.5, 7/8" BSF £10.00
Slotted brass nuts M24, 3/4", 1" BSF/WHIT/UNIFIED £18.00
Slotted brass nuts M30, 1 1/8", BSF/WHIT/UNIFIED £34.00
M36, 1 1/4" BSF/WHIT/UNIFIED £44.00
M42, 45, 1 1/2", 1 3/4" BSF/WHIT/UNIFIED £50.00
SPLIT PINS ø1/8" £1.00 ø3/16" £2.50 ø1/4" £3.00
GRUB SCREWS ST STL Socket set screw type
M6 x 6, 12, 16 or 20 long £1.00
M8 x 12, 16, or 25 long £2.00
5/16" unc x 3/8 or 3/4" long £1.00
or HT M8 x 12 or 1/4" unc x 3/8 " long £1.50
HI - GRIP HOSE CLIP (Stainless)
ø40 - £2.30 ø50 - £2.60 ø60 - £2.90 ø70 - £3.20 ø80 £3.50
STUD 1/2" WHIT x 3" LONG BRA ASS - £14.00 1/2" whit brass nut £1.75
COACH SCREWS, Stainless Steel ø8 x 70 £2.00
ø10 x 80 £2.50
YANMAR SAIL DRIVE, propeller fastenings.
Please specify saildrive type ie SD20, SD31, SD31, SD40 or SD50 when ordering
Nose cone, tab washer & 8mm spacer, prefered method for fixed blade props (14mm for SD40 & 50) £65.00
Nose cone kit with centre bolt, optional method for fixed blade props nett £81.00
Yanmar style saildrive nut and locking bolt £50.00
Spare tab washer 17 spline (for prefered nose cone system) £4.00
Spare 8mm spacer (for prefered nose cone system) £27.00
Spare 10mm spacer (Yanmar standard SD20, SD30 or SD31)) £27.00
Spare 16mm spacer (Yanmar standard SD40) or 14 mm for cone system £27.00
REMOTE SCREW DOWN LUBRICATOR
Price per metre
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201414
®
A ANGLE B C D E F G H Price
25 - 30 1” - 1 1/4” 9° - 17° 460 90 20 48 77 45 5 £270.00
35 - 40 1 3/8” - 1 1/2” 11° - 17° 500 110 27 60 86 75 5 £385.00
45 - 50 2” 11° - 15° 555 130 35 66 103 75 5 £435.00
55 - 60 10° - 15° 730 190 57 85 230 70 8 £1965.00
SHAFT LOGSWith flexi inboard gland
ELICHE RADICE S.p.A.RUDDERS
Light Duty
Series Price
12 6 V £450.00
12 6 P £450.00
16 7 P £655.00
16 7 V £655.00
16 7 S 0 £710.00
16 7 S 12 £710.00
14 10 P £720.00
14 10 V £720.00
14 10 V 10 £720.00
14 10 S 0 £775.00
14 10 S 12 £775.00
16 11 P £785.00
16 11 V £785.00
16 11 S 0 £830.00
16 11 S 12 £830.00
25 11 P&V £1090.00
16 13 P £985.00
16 13 V £985.00
16 13 S 0 £1035.00
16 13 S 12 £1035.00
45 16 P £2500.00
45 16 V £2500.00
45 19 P £2560.00
45 19 V £2560.00
4520 P £2560.00
4520 V £2560.00
5018 P £4015.00
Type 16/17-S.0° Weight 15 Kg
Type 16/17-P Weight 12 Kg
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 15
R and D Flexible Shaft Couplings
Flexible For Gearbox Diameter No. Coupling Price
Coupling Bolts Capacity £
HP/100rpm
910-001 Borg Warner, PRM, Hurth,Technodrive 4" 4 5 £58.00
910-002 Yanmar 4" 4 3 £58.00
910-003 Borg Warner, PRM, MPM, Twin Disc 5 3/4" 6 20 £158.00
910-004 Borg Warner, PRM, Hurth 4" 4 8 £74.00
910-005 Paragon 4" 4 7 £74.00
910-006 Twin Disc, MPM 5 3/4" 6 20 £186.00
910-007 Volvo 4" 4 3 £58.00
910-009 Borg Warner, PRM, Hurth, Volvo 5" 4 13 £110.00
910-012 Yanmar 5" 4 10 £110.00
910-013 Bukh 90mm 4 3 £58.00
910-014 Borg Warner, PRM, Hurth, Technodrive 4" 4 3 £58.00
910-015 Self change 350HD 8 3/4" 6 43 £367.00
910-016 Self change 700HD 10 1/4" 6 65 £553.00
910-017 Twin Disc 7 1/4" 6 40 £379.00
910-018 PRM 7 1/4" 6 40 £379.00
910-019 Volvo 4" 4 3 £58.00
910-020 Volvo 4" 4 5 £58.00
910-021 Enfield, Sonic 4" 2 2.5 £64.00
910-022 Twin Disc 9" 8 65 £553.00
910-024 Twin Disc 10 1/2" 8 85 £694.00
910-025 Borg Warner, PRM, MPM, Twin Disc 5 3/4" 6 28 £212.00
910-026 Twin Disc, MPM 5 3/4" 6 28 £245.00
910-029 Borg Warner, Hurth, Volvo 5" 4 20 £183.00
910-030 120 hp 11 1/2" 8 120 £1,075.00
900-003 Lister 4 3/4" 6 10 £144.00
Shaft Half CouplingSOLID TYPE - Specify 'd' diameter
4" for B.W. Hurth, PRM Bored & Keyed £98.00
5" for B.W. Hurth, PRM (Taper) Bored & Keyed £153.00
6" for PRM (Taper) Bored & Keyed £218.00
CLAMP ON
SPLIT TYPE - Specify 'd' diameter
4" for B.W. Hurth, PRM, Yanmar Bored, 25mm, 3/4" or 1" £70.00
5" for B.W. Hurth, PRM, Yanmar Bored, 1 1/4" £99.00
4" for B.W. Hurth, PRM, Yanmar Bored other than above £86.00
5" for B.W. Hurth, PRM, Yanmar Bored other than above £120.00
6" for P.R.M. Bored £160.00
4" Volvo type Bored £86.00
4" Yanmar type Bored £86.00
Keyslot above split type extra £24.00 nett
Non standard bores extra £28.00 nett
Earthing Connections, consist of a
silver impregnated rubber strip, which when fitted through
the axis of the coupling between the two failsafe straps
gives electrical continuity.
Part No Size (mm) to suit coupling
103-037 11 x 57 910-001, 002, 007
013, 014, 019 & 020 £16.00
103-039 17 x 57 910-003, 006, 009 £18.00
103-041 23 x 57 910-029 £19.00
Engine Mountings, medium, 800-036
300 lbs/140 kg capacity .04"/1mm deflection £25.00
small 800-040
90 lbs/41 kg capacity .14"/3.5mm deflection £28.00
small 800-041
200 lbs/91 kg capacity .14"/3.5mm deflection £28.00
(All 5/8" stud and 4" bolt down ctrs, 2" to 4" height adjustment)
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201416
SERIESONE™ SHAFT SEAL, consists of a convoluted connecting hose, 4 stainless hoseclips and a one
piece composite body with lip seal fitted. All for less than the price of an "old fashioned" packing seal
"SURESEAL"™ Available for larger shaft diameters
Imperial
Shaft Dia Hose sizes Price3/4" 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4" £142.007/8" 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4" £142.001" 1 5/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" £142.001 1/8" 1 5/8", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" £156.001 1/4" 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3" £156.00MetricShaft Dia Hose sizes Price22mm 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4" £142.0025mm 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4", 2 1/2" £142.0030mm 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3" £156.00
To order
We need to know the shaft diameter and the outside diameter of the stern tube.Please discuss the installation with us, when ordering.OPTIONAL EXTRA3/8" Raw water hose, clips and Tee Fitting (specify 3/8", 1/2", 5/8" or 3/4" Tee fitting) £23.00
RMTA SHAFT SEAL ELICHE RADICE S.p.A
AN ALTERNATIVE TO THE VOLVO SEAL
Grease lubricated and Water fed.Metric
Length Price111mm £59.00
116mm £65.00123mm £82.00129mm £108.00
111mm £59.00116mm £65.00
RADICE Special Silicon Grease - Service item £6.00
1 1/4 inch 45.48mm
Imperial1 inch 42mm
54,60mm
Hose Sizes39,42mm
45,48mm48,54mm
All prices listed are subject to UK VAT. Carriage and packing extra.
"SERIESONE"™ SHAFT SEALThe simple, no maintenance, easy to fit shaft seal.
Shaft Dia.25mm
30mm35mm40mm
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 17
PSS SHAFT SEALSThe PSS Shaft Seal uses the highest quality materials andmanufacturing procedures to give a drip free performance with zerowear to the propeller shaft and the capability of operating safely up to500° F.
They require no lubrication other than the water they are working in.
A fitting is provided on the carbon flange to accept a feed from theengine’s water exhaust to assist cooling.
Features:
vibration
never need replacing under normal
operating conditions
Technical Specifications:High Density Carbon Graphite Flange
stainless steel rotor during the initial first few minutes of operation ensuring aperfect fit thus eliminating any drips or spray.
on rubber and plastic based seals.Stainless Steel Rotor
shaft with double set screws.
Reinforced BellowsThe heavy reinforced nitrile bellows are resistant to petroleum basedproducts and retain their preset dimensions.
The PrincipleThe seal is created by contact of thecarbon face against the rotating stainlesssteel rotor. A hydrodynamic bead of waterbetween the carbon seal and rotorprovides lubrication. The carbon seal androtor provides lubrication. The carbonseal and bellows assembly is fitted to thestern tube by twin stainless hose clamps.Contact with the rotor is assisted by waterpressure which helps to cool theassembly. Seal contact is unaffected byengine laterally or fore and aft.
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 19
Teleflex Morse Controlsfrom the UK’s Major Stockistbased in London and Poole
For further details referto our dedicatedTeleflex Morse Catalogue
Hydraulic SteeringSystems also available
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201420
STEERING WHEELS
DISCOUNT ON RETAIL PRICES WHILE STOCKS LAST
SAVORETTIARMANDO
TRADITIONAL WOODEN WHEEL CHARACTER WHEEL STAINLESS & WOOD
TRADITIONAL WHEEL WITH BRASS FACING RING
TRADITIONAL WHEEL WITH STAINLESS HOOP DISHED WHEEL STAINLESS & WOOD
TRADITIONAL WHEEL WITH WOODEN RIM
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 21
STEERING WHEELS
STAINLESS STEEL SLIGHTLY DISHED WHEEL
TYPE 4 Sizes cm 37/15" £63.00 TYPE 5B Size cm 42/16" £74.00
cm 40/16" £70.00
cm 45/18" £85.00
STAINLESS STEEL DISHED WHEEL (ECONOMY) STAINLESS /POLYURATHANE DISHED WHEELS
TYPE 4B Sizes cm 32/13" £56.00 TYPE 10 (ECONOMY) Sizes cm 34/13" £63.00
cm 35/14" £58.00 TYPE 9 SMALL cm 35/14" £53.00
cm 40/16" £63.00 as illustrated cm 40/16" £63.00
grey or black
STAINLESS STEEL WHEEL, WOOD RIM STAINLESS/POLYURATHANE FLAT WHEEL
TYPE 4C Size cm 35/14" £115.00 TYPE 9 LARGE Sizes cm 45/18" £126.00
grey or 55/22" £145.00
black 70/28" £230.00
STAINLESS STEEL FLAT DESTROYER WHEEL FOLD FLAT HANDLE £42.00
TYPE 5 Sizes cm 50/20" £150.00 FIXED REVOLVING HANDLE £32.00
cm 60/24" £195.00 CLAMP ON HANDLE £63.00
cm 70/28" £225.00
cm 80/32" £310.00
GENERAL
All wheels have taper bore to suit Morse & Ultra flex helms.
Both wooden traditional wheels overleaf have brass hubs.
Number of spokes varies according to size. Sketches for
guidance only. Size and converted sizes are approximate
only.
DISCOUNT ON RETAIL PRICES WHILE STOCKS LAST
SAVORETTI ARMANDOSTAINLESS STEEL DISHED WHEEL
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201422
OTHER PRODUCTS AND SERVICES
HYDRODRIVE:Strut drives - for competition racing yachts.SONIC PROPULSION SYSTEMS:Sterndrives, Saildrives, Catamaran drivesand Bow Thrusters.
AGENTS FOR ELICHE RADICE S.p.A.Sterngear manufactured with service in mind.
MARINE DIESEL ENGINESFrom 9HP to 400HP plus.Diesel Outboards, Saildrives and Onboardgenerating sets.
MARINE DIESEL ENGINESFrom 9HP to 200HP.Saildrives and Onboard generating sets.
WATER PUMPSImpellers and spare parts.
ENFIELD Z DRIVESpare parts and service.
STERNDRIVESpare parts and service.
ENGINE ROOM FITTING OUT EQUIPMENTFuel, water, electrical and exhaust systems.
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014 23
ORDER / ENQUIRY form for new or replacement propeller
Please remember that any incorrect information you supply is likely to result in an incorrect propeller beingspecified, for which we cannot be responsible. Remember to advise us if you have a saildrive.
Any size we advise is an opinion only and subject to trials and developments at the purchasers cost.
Please advise any restrictions to good water flow around the propeller. i.e. behind a wide keel, in anaperture, shaft to one side of keel, etc. and any factors limiting diameter, by specifying dimension fromcentre line of the propeller shaft at the point where the propeller fits, to the under side of the hull, or closestpoint of the aperture.
For folding propellers, please advise distance available astern from large end of taper. When rudder is fittedclose to propeller, or in an aperture.
Name: ........................................................................... Telephone: ....................................................
Address: ........................................................................ Fax: ...............................................................
...................................................................................... E-mail: ...........................................................
Type of propeller required: ........................................... Date: .............................................................
Sailboat Displacement Half planing Planing
Waterline length ........................................................ Beam .......................... Draft .....................
Displacement ............................................................ Displacement w/full tanks ...................................
Previously recorded top speed ..............................… Number of engines .............................................
Engine Data:
Manufacturer ............................................................. Type ........................... Year .....................
Horsepower .............................................................. Max. RPM ...........................................................
Reduction in gearbox ...............................................
Present propeller
Diameter ......................... Pitch ................................ Number of blades ...............................................
Max. RPM with present propeller .............................. Max. Speed ........................................................
Direction of rotation seen from rear. Clockwise Counter clockwise
Shaft details
All measurements should be filled in
ØA .................................. ØD ...................................... S ................................ W ........................
Type of thread ..............................................................
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 201424
Plant List & Facilities
TURNING
WINTEC TC -15 CNC LATHE
COLCHESTER TRIUMPH 2000, CNC - 7½” wing over bed.(15” dia.), 48” between centres, 2” through headstock. FANUC controls.
COLCHESTER MASTIF - 10½” swing over bed (21” dia.), 48” between centres, 3½” dia. throughheadstock, taper turning & Ainjest screw cutting attachment.
COLCHESTER STUDENT - 6½” swing over bed (13” dia.), 24” between centres, 1½” throughheadstock, hydraulic copy attachment, and collet set.
With the above turning capacity 3” dia. shafts up to 16’ long can be machined.
MILLING
ADCOCK & SHIPLEY HORIZONTAL MILL - 24” under the spindle 10” x 36” table.(Cutters & Dividing Head for spline shaft manufacture).
HAYES TURRET MILL - 20” under the spindle 12” x 36” table.
BRIDGEPORT TURRET MILL - 20” under the spindle, 12” x 36” table.
Both machines are complimented by rotary tables dividing heads etc & digital readout onTurret Mill.
SLOTTING & BROACHING
SLOTTER - 6” stroke with 12” dia. table. 24” maximum dia. in gap.
MARCO PUSH BROACH - Imperial up to 3/8” wide and metric up to 10mm wide forboth straight and taper boxes.
BROACHING MACHINE LA POINT 48” HYDRAULIC PULL BROACH(various imperial spline and keyway broaches held).
DRILLING
2, MEDDINGS PILLAR DRILLS - up to ½” (13mm) holes.HERBERT 4 SPINDLE PRODUCTION PILLAR DRILL.
ASSEMBLY
We manufacture under contract marine drive system components and assemblies in houseincluding testing prior to despatch. We also produce ‘LAKE’ sterngear for the marine market.
Capacity available for sub-contract machining and assembly.
All prices listed are subject to UK VAT. Carriage and packing extra.Jan. 2014
Sillette Sonic Ltd.
Unit 2 Beverley Trading Estate190 - 192 Garth Road
Morden, SurreySM4 4LU - UK
tel: +44 (0)20 8337 7543 fax: +44 (0)20 8330 9014e-mail: [email protected]: www.sillette.co.uk
METHODS OF PAYMENTPersonal or company cheque payable to this company and drawn on a UK bank,(subject to prior clearance for non-account customers).Bank transfer international or otherwise.Bank draft international or otherwise payable to this company and drawn on a UK bank.
Please make all cheques payable to Sillette Sonic Ltd.(Cheques must be in Sterling Pounds and be payable by a bank in the UK)
BANK DETAILS:Lloyds Bank plc Sort Code 30-98-36 Account No. 4212186849 High StreetSutton, SurreySM1 1DX
TT / WIRE / SWIFT / & ORDINARY payments from overseas should be in Sterling Pounds and all bank chargespre-paid (yours & ours).Alternatively send Sterling Pound bank drafts payable by a UK bank.For international payments, use the following codes as well.
SWIFT / BIC Code Number LOYD GB 21235In favour of IBAN GB 84 LOYD 30983642121868
VISA, MASTERCARD, MAESTRO & SWITCH payments are accepted, in person, or by e-mail, mail, telephoneor fax.For all mail order transaction using a credit/debit card quote the following:
TERMS & CONDITIONS - key pointsAll prices listed in this catalogue are subject to carriage and UK VAT. Foreign buyers within the EU must notifytheir VAT/TVA number if they are registered, so that we can zero rate their invoice, for goods over £300 in netvalue.Prices are subject to fluctuation and should be checked before ordering.All sizes and specifications are subject to alteration without notice, please check current specification whenordering.No goods supplied on approval or on a sale or return basis unless previously agreed, in writing.All goods correctly supplied are not returnable.All propeller size advice is an opinion only based on customer information, and may require modification or finetuning at customer expense after trials.All transmission products are sold/specified from customers advised application and power use.Any variation to this must be agreed and confirmed in writing in advance of use.All deposits paid are non-refundable.All invoices rendered are confirmation of your order detail, please check on receipt and advise right away ifnot agreed.All goods are sold on the General Terms and Conditions of the seller. Full detail available on request.