SUPPLEMENTAL INSTRUCTION For ISUZU Automatic 2008 MY600 AISIN Transmission This diagram shows the correct porting that is to be used when con- necting the Muncie PTO to the Aisin 6-speed automatic transmission used in 2008 and later model year Isuzu vehicles. The TG Series PTO uses only the top lubrication port to lubricate the PTO. The CS6 Series PTO uses the top lubrication port as well as the main pressure port, located on the left side of the transmission in front of the PTO opening. The solenoid activation valve sup- plied with the PTO connects to the main pressure port. IN07-07 (Rev. 12-15) Printed in the U.S.A. © Muncie Power Products, Inc. 2015 Muncie Power Products, Inc. Member of the Interpump Hydraulics Group General Offices and Distribution Center • P.O. Box 548 • Muncie, IN 47308-0548 (765) 284-7721 • FAX (765) 284-6991 • Email [email protected] Website http://www.munciepower.com Drive Products, Exclusive Agents for Canada, ISO Certified by an Accredited Registrar ® Lubrication Port (4-22 PSI) Main Pressure Port (116-260 PSI) AISIN MY600 ISUZU (465) 2008 Model Year & Later LUBRICATION PORT TG or CS PTO 1/2 - 20UNF-2B Use 43T39222 Fitting MAIN PRESSURE PORT CS PTO Only 1/2 - 20UNF-2B Use 43T39222 Fitting TOP VIEW LEFT SIDE VIEW

SUPPLEMENTAL INSTRUCTION - Muncie Power … INSTRUCTION ... This diagram shows the correct porting that is to be used when con-necting the Muncie PTO to the Aisin 6-speed automatic

Download PDF Report

Upload
trinhthien
View
217
Download
0

Embed Size (px)

Citation preview

Page 1: SUPPLEMENTAL INSTRUCTION - Muncie Power … INSTRUCTION ... This diagram shows the correct porting that is to be used when con-necting the Muncie PTO to the Aisin 6-speed automatic

SUPPLEMENTALINSTRUCTIONFor ISUZU Automatic 2008 MY600 AISIN Transmission

This diagram shows the correct porting that is to be used when con-necting the Muncie PTO to the Aisin 6-speed automatic transmission used in 2008 and later model year Isuzu vehicles. The TG Series PTO uses only the top lubrication port to lubricate the PTO.

The CS6 Series PTO uses the top lubrication port as well as the main pressure port, located on the left side of the transmission in front of the PTO opening.

The solenoid activation valve sup-plied with the PTO connects to the main pressure port.

IN07-07 (Rev. 12-15) Printed in the U.S.A.© Muncie Power Products, Inc. 2015

Muncie Power Products, Inc. Member of the Interpump Hydraulics GroupGeneral Offices and Distribution Center • P.O. Box 548 • Muncie, IN 47308-0548

(765) 284-7721 • FAX (765) 284-6991 • Email [email protected] Website http://www.munciepower.com

Drive Products, Exclusive Agents for Canada, ISO Certified by an Accredited Registrar

Lubrication Port(4-22 PSI)

Main Pressure Port(116-260 PSI)

AISIN MY600 ISUZU (465) 2008 Model Year & Later

LUBRICATION PORT

TG or CS PTO1/2 - 20UNF-2BUse 43T39222 Fitting

MAIN PRESSURE PORT

CS PTO Only1/2 - 20UNF-2BUse 43T39222 Fitting