AutoCAD SHX Text
SUPERVISED TRANSFER SWITCH MOUNTING DETAIL (LOOKING AT FRONT OF DOOR)
AutoCAD SHX Text
LOGIC (LOOKING AT BACK OF DOOR)
AutoCAD SHX Text
FIELD CONNECTION (ENGINE START & AUXILIARY CONTACTS) 200-4000A OPEN TRANSITION (AND 230A/600V) 150-4000A PROGRAMMED TRANSITION
AutoCAD SHX Text
8.7 [.34]
AutoCAD SHX Text
LOGIC (SIDE VIEW) (SHOWN MOUNTED TO 12 GA. DOOR)
AutoCAD SHX Text
LOGIC MOUNTING (LOOKING AT BACK OF DOOR) 1/4-20 X 1 INCH LONG STUDS REQUIRED
AutoCAD SHX Text
16.0 [.63]
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182A.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
OPEN UNIT
AutoCAD SHX Text
MPAC CONTROLLER
AutoCAD SHX Text
STANDARD, PROGRAMMED TRANSITION
AutoCAD SHX Text
30-4000 AMPS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-11-07
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES
AutoCAD SHX Text
(A-1) 1-18 WAS 1-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
VIEWS OF MPAC UNIT UPDATED; (A-2) MODEL K1 REMOVED,
AutoCAD SHX Text
STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
ENGINE START TERMINAL BLOCK
AutoCAD SHX Text
WIRE HARNESS
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
4X 7.9EMBOSSED MTG. HOLES
AutoCAD SHX Text
4 POLE W/SWITCHED NEUTRAL SHOWN
AutoCAD SHX Text
SWITCHED NEUTRAL (4 POLE ONLY)
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 12.7 [.50]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1829 [72].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
1/4-20 X 1" (4).
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
5.4 [12]
AutoCAD SHX Text
6.8 [15]
AutoCAD SHX Text
8.2 [18]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
787 [31.0]
AutoCAD SHX Text
445 [17.5]
AutoCAD SHX Text
295 [11.7]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SWITCH RATING
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
#6 AWG TO 250 MCM
AutoCAD SHX Text
#8 AWG TO 3/0 AWG
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182K.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KSS
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
40-225 AMP ATS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
(A-1) 10-18 WAS 11-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KSS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
4 POLE W/SWITCHED NEUTRAL SHOWN
AutoCAD SHX Text
7.9 (4)EMBOSSED MOUNTING HOLES
AutoCAD SHX Text
WIRE HARNESS (SUPPLIED WITH CONTACTOR)
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
ENGINE START TERMINAL BLOCK
AutoCAD SHX Text
SWITCHED NEUTRAL (4 POLE ONLY)
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 13 [.50]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1829 [72].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
1/4-20 X 1" (4).
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
6.8 [15]
AutoCAD SHX Text
8.2 [18]
AutoCAD SHX Text
9.5 [21]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
1219 [48.0]
AutoCAD SHX Text
560 [22.0]
AutoCAD SHX Text
330 [13.0]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
#6 AWG TO 350 MCM
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINTS
AutoCAD SHX Text
ADV7182L.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL, KSS
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
260 AMP ATS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 11-18 WAS 12-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KSS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
ENGINE START TERMINAL BLOCK TYP
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
WIRE HARNESS TYP
AutoCAD SHX Text
4X 11.10 [.44]MTG. HOLES TYP
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
SWITCHED NEUTRAL
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 13 [.50]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1829 [72].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
3/8-16 X 1" (4)
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
21.3 [47]
AutoCAD SHX Text
24.0 [53]
AutoCAD SHX Text
26.8 [59]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
1219 [48.0]
AutoCAD SHX Text
560 [22.0]
AutoCAD SHX Text
330 [13.0]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
ONE #4 AWG TO 600 MCM
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
OR TWO #6 AWG TO 250 MCM
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182M.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KSS
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
400 AMP ATS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 12-18 WAS 13-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KSS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
RATINGS DECAL (TYP)
AutoCAD SHX Text
ENGINE START TERMINAL BLOCK TYP
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
4X 11.10 [.44]MTG. HOLES TYP
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
WIRE HARNESS TYP
AutoCAD SHX Text
SWITCHED NEUTRAL
AutoCAD SHX Text
AUXILIARY CONTACTS TYP
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.0]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1829 [72].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
3/8-16 X 1" (4).
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
27.2 [60]
AutoCAD SHX Text
29.5 [65]
AutoCAD SHX Text
31.8 [70]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
1600 [63.0]
AutoCAD SHX Text
610 [24.0]
AutoCAD SHX Text
445 [17.5]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
TWO #2 AWG TO 600 MCM
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182N.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KSS
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
600 AMP ATS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 13-18 WAS 14-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KSS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
SERVICE HANDLE (SHOWN ATTACHED)
AutoCAD SHX Text
AUXILIARY CONTACTS
AutoCAD SHX Text
ENGINE START CONTACTS
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
1/2-13 X 1" (4)
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
HARNESS LENGTH IS 1219 [48].
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.0]
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
%%uGM52042 SHOWN
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182T.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
MODEL KSS
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
800 AMP ATS
AutoCAD SHX Text
864 [34.0]
AutoCAD SHX Text
1832 [72.1]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
514 [20.2]
AutoCAD SHX Text
TEMPERATURE
AutoCAD SHX Text
SIZE OF UL LISTED SOLDERLESS SCREW TYPE TERMINALS FOR EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
750-1/0 AWG
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
65 Kg [143 Lbs]
AutoCAD SHX Text
75 Kg [165 Lbs]
AutoCAD SHX Text
560 [22.0]
AutoCAD SHX Text
480 [18.9]
AutoCAD SHX Text
DIMENSION
AutoCAD SHX Text
560 [22.0]
AutoCAD SHX Text
480 [18.9]
AutoCAD SHX Text
590 [23.2]
AutoCAD SHX Text
510 [20.0]
AutoCAD SHX Text
510 [20.0]
AutoCAD SHX Text
590 [23.2]
AutoCAD SHX Text
DIMENSION
AutoCAD SHX Text
PART NO.
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
SHEET 18 ADDED; [83876]
AutoCAD SHX Text
(A-1) 17-18 WAS 18-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KSS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
(SHOWN ATTACHED)
AutoCAD SHX Text
SERVICE HANDLE
AutoCAD SHX Text
%%uGM52038 SHOWN
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
AUXILIARY CONTACTS
AutoCAD SHX Text
ENGINE START CONTACTS
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
1/2-13 X 1" (4)
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
HARNESS LENGTH IS 1219 [48].
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.0]
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182U.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
MODEL KSS
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
1000 AMP ATS
AutoCAD SHX Text
PART NO.
AutoCAD SHX Text
DIMENSION
AutoCAD SHX Text
670 [26.4]
AutoCAD SHX Text
570 [22.4]
AutoCAD SHX Text
570 [22.4]
AutoCAD SHX Text
670 [26.4]
AutoCAD SHX Text
540 [21.3]
AutoCAD SHX Text
640 [25.2]
AutoCAD SHX Text
DIMENSION
AutoCAD SHX Text
540 [21.3]
AutoCAD SHX Text
640 [25.2]
AutoCAD SHX Text
80 Kg [176 Lbs]
AutoCAD SHX Text
70 Kg [154 Lbs]
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
600-2 AWG
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
SIZE OF UL LISTED SOLDERLESS SCREW TYPE TERMINALS FOR EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
TEMPERATURE
AutoCAD SHX Text
514 [20.2]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
1832 [72.1]
AutoCAD SHX Text
864 [34.0]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
SHEET 19 ADDED; [83876]
AutoCAD SHX Text
(A-1) 18-18 WAS 19-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KSS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
ENGINE START TERMINALS
AutoCAD SHX Text
AUXILIARY CONTACTS
AutoCAD SHX Text
ENGINE START TERMINALS
AutoCAD SHX Text
AUXILIARY CONTACTS
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
5.80 [.23] (2)
AutoCAD SHX Text
5.80 [.23] (2)
AutoCAD SHX Text
100A 3 POLE SHOWN
AutoCAD SHX Text
200A 3 POLE SHOWN
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 12.7 [.50]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1219 [48].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
#10 X 1" (3).
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
6.4 [14]
AutoCAD SHX Text
7.7 [17]
AutoCAD SHX Text
9.1 [20]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
1219 [48.0]
AutoCAD SHX Text
560 [22.0]
AutoCAD SHX Text
330 [13.0]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
#14 - 1/0
AutoCAD SHX Text
#6 TO 250 MCM
AutoCAD SHX Text
10.4 [23]
AutoCAD SHX Text
9.1 [20]
AutoCAD SHX Text
7.7 [17]
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182P.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL K1
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
PROGRAMMED TRANSITION
AutoCAD SHX Text
100 & 200 AMP ATS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 14-18 WAS 15-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
DATA ON THIS SHEET VOID
AutoCAD SHX Text
DATA ON THIS SHEET VOID
AutoCAD SHX Text
INFORMATION ON THIS SHEET NO LONGER VALID [CT156425]
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
ENGINE START TERMINALS
AutoCAD SHX Text
AUXILIARY TERMINALS
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 12.7 [.50]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1219 [48].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
5/16-18 X 1" (3)
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
1219 [48.0]
AutoCAD SHX Text
560 [22.0]
AutoCAD SHX Text
330 [13.0]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
ONE #4 - 600 MCM OR
AutoCAD SHX Text
TWO 1/0 TO 250 MCM
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182R.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL K1
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
PROGRAMMED TRANSITION
AutoCAD SHX Text
400 AMP ATS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 15-18 WAS 16-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
DATA ON THIS SHEET VOID
AutoCAD SHX Text
DATA ON THIS SHEET VOID
AutoCAD SHX Text
INFORMATION ON THIS SHEET NO LONGER VALID [CT156425]
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
ENGINE START CONTACTS
AutoCAD SHX Text
AUXILIARY CONTACTS
AutoCAD SHX Text
MANUAL OPERATION HANDLE
AutoCAD SHX Text
14.0 [.55] (4)
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.0]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS 1219 [48].
AutoCAD SHX Text
6. SUGGESTED BOLT SIZE AND LENGTH FOR MOUNTING ATS IS
AutoCAD SHX Text
1/2-13 X 1" (4)
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS]
AutoCAD SHX Text
28.6 [63]
AutoCAD SHX Text
31.3 [69]
AutoCAD SHX Text
34.0 [75]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
1600 [63.0]
AutoCAD SHX Text
610 [24.0]
AutoCAD SHX Text
445 [17.5]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
RANGE OF AL-CU
AutoCAD SHX Text
WIRE SIZES
AutoCAD SHX Text
TWO #2 TO 600 MCM
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182S.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL K1
AutoCAD SHX Text
SERIES RATED
AutoCAD SHX Text
PROGRAMMED TRANSITION
AutoCAD SHX Text
600 AMP ATS
AutoCAD SHX Text
SHEET 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 16-18 WAS 17-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
DATA ON THIS SHEET VOID
AutoCAD SHX Text
DATA ON THIS SHEET VOID
AutoCAD SHX Text
INFORMATION ON THIS SHEET NO LONGER VALID [CT156425]
AutoCAD SHX Text
PROGRAMMABLE I/O
AutoCAD SHX Text
LOGIC DISCONNECT
AutoCAD SHX Text
LOAD SHED
AutoCAD SHX Text
8.7 [.34]
AutoCAD SHX Text
8.7 [.34]
AutoCAD SHX Text
8.7 [.34]
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182B.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
ACCESSORIES
AutoCAD SHX Text
OPEN UNIT
AutoCAD SHX Text
MPAC CONTROLLER
AutoCAD SHX Text
STANDARD, PROGRAMMED TRANSITION
AutoCAD SHX Text
30-4000 AMPS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES
AutoCAD SHX Text
(A-1) 2-18 WAS 2-19; (B-5) VIEW OF BATTERY CHARGER REMOVED; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) ACCESSORIES WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
40-150A NEUTRAL
AutoCAD SHX Text
100-400A NEUTRAL
AutoCAD SHX Text
600A NEUTRAL
AutoCAD SHX Text
600-1200A NEUTRAL
AutoCAD SHX Text
1200-4000A NEUTRAL
AutoCAD SHX Text
AL/CU WIRE RANGE
AutoCAD SHX Text
#6-3/0 (3 PLACES)
AutoCAD SHX Text
ONE #4-600MCM OR TWO 1/0-250 MCM
AutoCAD SHX Text
AL/CU WIRE RANGE
AutoCAD SHX Text
(3 PLACES)
AutoCAD SHX Text
#2-600MCM (6 PLACES)
AutoCAD SHX Text
AL/CU WIRE RANGE
AutoCAD SHX Text
AL/CU WIRE RANGE
AutoCAD SHX Text
#2-600MCM (12 PLACES)
AutoCAD SHX Text
1200A: 1/0-750MCM (16 PLACES)
AutoCAD SHX Text
AL/CU WIRE RANGE
AutoCAD SHX Text
1600-2000A: 1/0-750MCM (24 PLACES)
AutoCAD SHX Text
2600-4000A: 1/0-750MCM (36 PLACES)
AutoCAD SHX Text
8.70 [.34] (4)
AutoCAD SHX Text
7.10 X 14.3 [.28 X .56] OBROUND (8)
AutoCAD SHX Text
8.70 [.34] (4)
AutoCAD SHX Text
8.70 [.34] (4)
AutoCAD SHX Text
8.70 [.34] (4)
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
NEUTRAL INCLUDED WITH UNIT IS BASED ON CONTACTOR. SEE UNIT SPECIFICATION.
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182C.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
NEUTRALS
AutoCAD SHX Text
OPEN UNIT
AutoCAD SHX Text
MPAC CONTROLLER
AutoCAD SHX Text
STANDARD, PROGRAMMED TRANSITION
AutoCAD SHX Text
30-4000 AMPS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES
AutoCAD SHX Text
(A-1) 3-18 WAS 3-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) NEUTRALS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
NEUTRAL LOCATED ON RIGHT SIDE
AutoCAD SHX Text
30-200 AMP
AutoCAD SHX Text
ENGINE START CONNECTIONS 14 & 15
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
NORMAL & EMERGENCY CONTACTS ARE REVERSED WITH OPTIONAL OVERLAPPING NEUTRAL.
AutoCAD SHX Text
230 AMP (208-480V)
AutoCAD SHX Text
NEUTRAL (SEE SPEC)
AutoCAD SHX Text
7.9 [.31] (4) (SUGGESTED BOLT SIZE: 1/4-20 X 1" (4)
AutoCAD SHX Text
ONE #14 TO 4/0 AWG
AutoCAD SHX Text
1. WHEN INSTALLING, CONNECT NORMAL, EMERGENCY, AND LOAD
AutoCAD SHX Text
CONDUCTORS TO SIMILARLY MARKED TERMINALS.
AutoCAD SHX Text
2. ALL INTERNAL CONNECTIONS ARE MADE AT THE FACTORY.
AutoCAD SHX Text
3. MAINTAIN ELECTRICAL CLEARANCE OF 12.7 [.50]
AutoCAD SHX Text
MINIMUM BETWEEN LIVE METAL PARTS AND GROUND METAL
AutoCAD SHX Text
WHEN MOUNTING 30 THRU 150 AMP. SIZES.
AutoCAD SHX Text
4. WHEN OPEN TYPE ATS'S ARE INTENDED FOR ENCLOSURE TYPE
AutoCAD SHX Text
MOUNTING BY OTHERS, MOUNT THE TRANSFER SWITCH UNIT
AutoCAD SHX Text
ON THE INSIDE BACK SURFACE AND THE CONTROL PANEL (S)
AutoCAD SHX Text
5. THE CONTROL PANEL IS CONNECTED TO THE TRANSFER SWITCH
AutoCAD SHX Text
PANEL BY A WIRE HARNESS WITH A QUICK DISCONNECT PLUG.
AutoCAD SHX Text
HARNESS LENGTH IS - 36.00 (914.4 MM) FOR 30 - 230 AMP
AutoCAD SHX Text
ON THE INSIDE DOOR SURFACE.
AutoCAD SHX Text
(WEIGHT INCLUDES CONTACTOR ONLY)
AutoCAD SHX Text
APPROXIMATE SHIPPING WEIGHT, KG [LBS.]
AutoCAD SHX Text
SIZES OF UL LISTED SOLDERLESS
AutoCAD SHX Text
SCREW TYPE TERMINALS FOR
AutoCAD SHX Text
EXTERNAL POWER CONNECTIONS
AutoCAD SHX Text
SWITCH RATING
AutoCAD SHX Text
RANGE OF AL-CU WIRE SIZE
AutoCAD SHX Text
3 W/NEUTRAL
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
787.0 [31.00]
AutoCAD SHX Text
444.5 [17.50]
AutoCAD SHX Text
295.4 [11.63]
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
SWITCH RATING (AMPS)
AutoCAD SHX Text
230 (208-480V)
AutoCAD SHX Text
330.2 [13.00]
AutoCAD SHX Text
457.2 [18.00]
AutoCAD SHX Text
1219.2 [48.00]
AutoCAD SHX Text
(A-2) MODEL KCS WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
230 (208-480V)
AutoCAD SHX Text
230 (208-480V)
AutoCAD SHX Text
ONE #14 TO 4/0 AWG
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182D.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KCS
AutoCAD SHX Text
STANDARD TRANSITION
AutoCAD SHX Text
30-230 AMPS ATS
AutoCAD SHX Text
REMOVED 260-400 AMP 230A -600V CONTACTOR VIEW AND CHART
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
INFORMATION UPDATED; (A-4) 230 (208-480V) WAS 230-400;
AutoCAD SHX Text
(A-2) 30-230 WAS 30-400; SHEETS 18 & 19 ADDED; (A-1)
AutoCAD SHX Text
NOTE 5.: 45.00 (1143.0 MM) FOR 260-400 AMP REMOVED; [83876]
AutoCAD SHX Text
(A-1) 4-18 WAS 4-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
NORMAL LUGS
AutoCAD SHX Text
EMERGENCY LUGS
AutoCAD SHX Text
LOAD LUGS
AutoCAD SHX Text
NORMAL LUGS
AutoCAD SHX Text
EMERGENCY LUGS
AutoCAD SHX Text
LOAD LUGS
AutoCAD SHX Text
600 AMP 3 POLE WITH SOLID NEUTRAL
AutoCAD SHX Text
600 AMP 4 POLE WITH SWITCHED NEUTRAL
AutoCAD SHX Text
150-400 AMP 3 POLE WITH SOLID NEUTRAL
AutoCAD SHX Text
150-400 AMP 4 POLE WITH SWITCHED NEUTRAL
AutoCAD SHX Text
MOUNTING SLOTS (RIGHT SIDE)
AutoCAD SHX Text
SWITCH MOUNTING DETAIL 600A
AutoCAD SHX Text
MOUNTING SLOTS (LEFT SIDE)
AutoCAD SHX Text
DETAIL A
AutoCAD SHX Text
DETAIL B
AutoCAD SHX Text
DETAIL B
AutoCAD SHX Text
MIN. MOUNTING STUD HEIGHT 1.75"
AutoCAD SHX Text
DETAIL A
AutoCAD SHX Text
MOUNTING SLOTS (LEFT SIDE)
AutoCAD SHX Text
SWITCH MOUNTING DETAIL 150-400A
AutoCAD SHX Text
MOUNTING HOLES (RIGHT SIDE)
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182E.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KCS/KCP
AutoCAD SHX Text
230 A (600V), 260-600A STANDARD TRANSITION
AutoCAD SHX Text
150-600A PROGRAMMED TRANSITION
AutoCAD SHX Text
TWO #2 - 600 MCM
AutoCAD SHX Text
ONE #4 - 600MCM OR TWO 1/0 - 250 MCM
AutoCAD SHX Text
AL/CU CABLE CONNECTIONS PER PHASE & NEUTRAL
AutoCAD SHX Text
(A-2) MODEL KCS/KCP WAS J FRAME, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
SWITCH RATING
AutoCAD SHX Text
PROGRAMMED TRANSITION 150-400A 2 & 3P ATS REMOVED,
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
REPLACED WITH 230A (600V), 260-600 A OPEN TRANSITION
AutoCAD SHX Text
150-600A PROGRAMMED TRANSITION; [83876]
AutoCAD SHX Text
MIN. REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
(A-1) 5-18 WAS 5-19; [88678]
AutoCAD SHX Text
(A-8) 1422 [56.0] WAS 610 [24.0] & 610 [24.0] WAS
AutoCAD SHX Text
1422 [56.0]; [91374]
AutoCAD SHX Text
EMERGENCY LUG PLATES
AutoCAD SHX Text
LOAD LUG PLATES
AutoCAD SHX Text
"LL2" 2P "LC" 3P
AutoCAD SHX Text
NEUTRAL "LL0" 2P "LN" 3P
AutoCAD SHX Text
NEUTRAL "EL0" 2P "EN" 3P
AutoCAD SHX Text
"EL2" 2P "EC" 3P
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
NEUTRAL "NL0" 2P "NN" 3P
AutoCAD SHX Text
"NL2" 2P "NC" 3P
AutoCAD SHX Text
"LL1" 2P "LA" 3P
AutoCAD SHX Text
"EL1" 2P "EA" 3P
AutoCAD SHX Text
"NL1" 2P "NA" 3P
AutoCAD SHX Text
FRONT VIEW
AutoCAD SHX Text
NORMAL LUG PLATES
AutoCAD SHX Text
DISCONNECT PLUG(S). THE HARNESS EXITS THE TRANSFER SWITCH ON THE RIGHT SIDE.
AutoCAD SHX Text
7. THE CONTROL PANEL(S) IS CONNECTED TO THE TRANSFER SWITCH BY A HARNESS WITH A QUICK
AutoCAD SHX Text
TRANSFER SWITCH AND THE REAR OF THE DOOR WHEN THE DOOR IS CLOSED.
AutoCAD SHX Text
6. WHEN MOUNTING THE TRANSFER SWITCH IN AN ENCLOSURE, MOUNT THE TRANSFER SWITCH UNIT ON THE INSIDE
AutoCAD SHX Text
BACK SURFACE OF THE ENCLOSURE. THE CONTROL(S) PANEL AND OPERATOR CONTROLS SHOULD BE MOUNTED
AutoCAD SHX Text
ON THE INSIDE, REAR OF THE DOOR. A MINIMUM DEPTH OF 152.4mm [6.00 IN.] IS REQUIRED BETWEEN THE
AutoCAD SHX Text
4. ALL INTERNAL CONNECTIONS ARE MADE AT FACTORY.
AutoCAD SHX Text
5. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.00 IN.] BETWEEN LIVE METAL PARTS AND GROUNDED METAL.
AutoCAD SHX Text
2. A FULL RATED NEUTRAL CONNECTION FOR EACH SOURCE AND THE LOAD IS OPTIONAL.
AutoCAD SHX Text
3. WHEN INSTALLING CONDUCTORS, CONNECT TO SIMILARLY MARKED PHASES OF NORMAL, EMERGENCY, & LOAD.
AutoCAD SHX Text
DETERMINE TERMINATION POSITIONS.)
AutoCAD SHX Text
NORMAL. (REFER TO THE WIRING DIAGRAM FURNISHED WITH EACH TRANSFER SWITCH TO
AutoCAD SHX Text
1. THE STANDARD SWITCH CONFIGURATION IS FOR TOP EMERGENCY & LOAD AND BOTTOM
AutoCAD SHX Text
90 [196]
AutoCAD SHX Text
78 [170]
AutoCAD SHX Text
68 [150]
AutoCAD SHX Text
APPROX. SHIPPING WT.: KG [LBS]
AutoCAD SHX Text
BUS TERMINATION DETAIL (TYP.)
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
1200 AMPS
AutoCAD SHX Text
BUS BAR PER PHASE
AutoCAD SHX Text
BOLTING SURFACE
AutoCAD SHX Text
6.4 X 63.5 [0.25 X 25.0]
AutoCAD SHX Text
12.7 X 63.5 [0.50 X 2.50]
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
FRONT VIEW
AutoCAD SHX Text
800-1000 AMPS
AutoCAD SHX Text
800-1200 AMPS
AutoCAD SHX Text
800,1000
AutoCAD SHX Text
1200 AMP NEEDS VENTILATION TOP AND BOTTOM.
AutoCAD SHX Text
MINIMUM REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
NOTE: *=WIDTH MAY BE 762 [30.0] IF NO CABLES ARE
AutoCAD SHX Text
ARE TO BE ALONG THE SIDE OF TRANSFER SWITCH,
AutoCAD SHX Text
800-1200
AutoCAD SHX Text
CABLE ACCOMMODATIONS (PER PHASE & NEUTRAL)
AutoCAD SHX Text
SCREW TYPE (STANDARD) - (4) 1/0 - 750 MCM AL/CU
AutoCAD SHX Text
1829 [72.0]
AutoCAD SHX Text
2210 [87.0]
AutoCAD SHX Text
864 [34.0]
AutoCAD SHX Text
965 [38.0]
AutoCAD SHX Text
508 [20.0]
AutoCAD SHX Text
584 [23.0]
AutoCAD SHX Text
80 [175]
AutoCAD SHX Text
94 [205]
AutoCAD SHX Text
108 [235]
AutoCAD SHX Text
TRANSITION
AutoCAD SHX Text
STANDARD
AutoCAD SHX Text
PROGRAMMED
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182F.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KCS/KCP
AutoCAD SHX Text
800-1200A STANDARD & PROGRAMMED TRANSITION
AutoCAD SHX Text
(A-3) 800-1000A WAS 600-1000A, 150-400A 4P PROGRAMMED
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
TRANSITION REMOVED; ALL CHARTS: 800 AMPS WAS 600 AMPS; [83876]
AutoCAD SHX Text
(A-1) 6-18 WAS 6-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-2) MODEL KCS/KCP WAS MODEL K1, 1200 STANDARD WAS
AutoCAD SHX Text
1000 OPEN; (A-3) STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
BUS TERMINATION DETAIL
AutoCAD SHX Text
L2 2 POLES
AutoCAD SHX Text
3 POLES W/SWITCHING POLE OR OVERLAPPING POLE OR NEUTRAL PLATE
AutoCAD SHX Text
L1 2 POLES
AutoCAD SHX Text
NEUTRAL (N)
AutoCAD SHX Text
2X 10.4 [.41] (2) PER PLATE
AutoCAD SHX Text
4X 14.2 [.56] X 19.1 [.75] SLOTS REF. (4) HOLES PER PLATE
AutoCAD SHX Text
6X 12.7 [.50] MTG. HOLES SUGGESTED MTG BOLTS: 3/8-16 X 1" (4)
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
SCREW TYPE (STANDARD) - (6) 1/0 - 750 MCM AL/CU
AutoCAD SHX Text
NOTE: CONSULT FACTORY FOR OTHER CABLING & TERMINATION REQUIREMENTS.
AutoCAD SHX Text
CABLE ACCOMMODATIONS (PER PHASE & NEUTRAL)
AutoCAD SHX Text
1600 & 2000
AutoCAD SHX Text
6.4 X 101.6 [0.25 X 4.0]
AutoCAD SHX Text
BOLTING SURFACE
AutoCAD SHX Text
BUS BAR PER PHASE
AutoCAD SHX Text
1. THE STANDARD SWITCH CONFIGURATION IS FOR TOP EMERGENCY & LOAD AND BOTTOM
AutoCAD SHX Text
NORMAL. (REFER TO THE WIRING DIAGRAM FURNISHED WITH EACH TRANSFER SWITCH TO
AutoCAD SHX Text
DETERMINE TERMINATION POSITIONS.)
AutoCAD SHX Text
3. WHEN INSTALLING CONDUCTORS, CONNECT TO SIMILARLY MARKED PHASES OF NORMAL,
AutoCAD SHX Text
2. A FULL RATED NEUTRAL CONNECTION FOR EACH SOURCE AND THE LOAD IS OPTIONAL.
AutoCAD SHX Text
5. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.00] BETWEEN LIVE METAL PARTS
AutoCAD SHX Text
4. ALL INTERNAL CONNECTIONS ARE MADE AT FACTORY.
AutoCAD SHX Text
INSIDE, REAR OF THE DOOR. A MINIMUM DEPTH OF 152.4mm [6.00] IS REQUIRED
AutoCAD SHX Text
SWITCH UNIT ON THE INSIDE BACK SURFACE OF THE ENCLOSURE.
AutoCAD SHX Text
6. WHEN MOUNTING THE TRANSFER SWITCH IN AN ENCLOSURE, MOUNT THE TRANSFER
AutoCAD SHX Text
7. THE CONTROL PANEL(S) IS CONNECTED TO THE TRANSFER SWITCH BY A HARNESS
AutoCAD SHX Text
WITH A QUICK DISCONNECT PLUG(S). THE HARNESS EXITS THE TRANSFER SWITCH
AutoCAD SHX Text
PROGRAMMED
AutoCAD SHX Text
STANDARD
AutoCAD SHX Text
TRANSITION
AutoCAD SHX Text
274 [605]
AutoCAD SHX Text
252 [555]
AutoCAD SHX Text
APPROX. SHIPPING WT.: KG [LBS]
AutoCAD SHX Text
190 [420]
AutoCAD SHX Text
213 [470]
AutoCAD SHX Text
EMERGENCY, & LOAD.
AutoCAD SHX Text
AND GROUNDED METAL.
AutoCAD SHX Text
BETWEEN THE TRANSFER SWITCH AND THE REAR DOOR WHEN THE DOOR IS CLOSED.
AutoCAD SHX Text
THE CONTROL(S) PANEL AND OPERATOR CONTROLS SHOULD BE MOUNTED ON THE
AutoCAD SHX Text
ON THE RIGHT SIDE.
AutoCAD SHX Text
1600 & 2000
AutoCAD SHX Text
MIN. REQUIRED ENCLOSURE SIZE mm [IN.].
AutoCAD SHX Text
1219 [48]
AutoCAD SHX Text
965 [38]
AutoCAD SHX Text
2286 [90]
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182G.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KCS/KCP
AutoCAD SHX Text
STANDARD, PROGRAMMED TRANSITION
AutoCAD SHX Text
1600-2000 AMPS
AutoCAD SHX Text
STANDARD CONNECTION
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 7-18 WAS 7-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(A-8) STANDARD WAS OPEN; (A-2) MODEL KCS/KCP WAS MODEL
AutoCAD SHX Text
K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
OVERLAPPING NEUTRAL
AutoCAD SHX Text
NEUTRAL (N)
AutoCAD SHX Text
SOLID OR
AutoCAD SHX Text
12.7 [.50](6 MOUNTING HOLES)
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
14.2 [.56] X 19.1 [.75] SLOT REF. (4 HOLE PER PLATE)
AutoCAD SHX Text
10.4 [.41](4 HOLE PER PLATE)
AutoCAD SHX Text
FRONT VIEW
AutoCAD SHX Text
OR 3 POLES W / SOLID OR OVERLAPPING NEUTRAL
AutoCAD SHX Text
STANDARD TRANSITION WITHOUT THIS COVER.
AutoCAD SHX Text
PROGRAMMED TRANSITION WITH THIS COVER.
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
ON THE RIGHT SIDE.
AutoCAD SHX Text
DOOR, 152.4 [6.0] MIN. DEPTH TO TRANSFER SWITCH FOR CONTROLS IS REQUIRED.
AutoCAD SHX Text
AND GROUNDED METAL.
AutoCAD SHX Text
EMERGENCY, & LOAD.
AutoCAD SHX Text
WITH A QUICK DISCONNECT PLUG(S). THE HARNESS EXITS THE TRANSFER SWITCH
AutoCAD SHX Text
8. THE CONTROL PANEL(S) IS CONNECTED TO THE TRANSFER SWITCH BY A HARNESS
AutoCAD SHX Text
7. WHEN MOUNTING THE TRANSFER SWITCH IN THE ENCLOSURE, THE CONTROL PANEL(S)
AutoCAD SHX Text
AND OPERATOR CONTROLS SHOULD BE MOUNTED ON THE INSIDE, REAR SURFACE OF THE
AutoCAD SHX Text
5. ALL INTERNAL CONNECTIONS ARE MADE AT FACTORY.
AutoCAD SHX Text
6. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.00] BETWEEN LIVE METAL PARTS
AutoCAD SHX Text
2. A FULL RATED NEUTRAL CONNECTION FOR EACH SOURCE AND THE LOAD IS OPTIONAL.
AutoCAD SHX Text
3. WHEN INSTALLING CONDUCTORS, CONNECT TO SIMILARLY MARKED PHASES OF NORMAL,
AutoCAD SHX Text
DETERMINE TERMINATION POSITIONS.)
AutoCAD SHX Text
NORMAL. (REFER TO THE WIRING DIAGRAM FURNISHED WITH EACH TRANSFER SWITCH TO
AutoCAD SHX Text
1. THE STANDARD SWITCH CONFIGURATION IS FOR TOP EMERGENCY & LOAD AND BOTTOM
AutoCAD SHX Text
2210 [87]
AutoCAD SHX Text
965 [38]
AutoCAD SHX Text
635 [25]
AutoCAD SHX Text
MIN. REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
1600 & 2000
AutoCAD SHX Text
1600 & 2000
AutoCAD SHX Text
CABLE ACCOMMODATIONS (PER PHASE & NEUTRAL)
AutoCAD SHX Text
SCREW TYPE (STANDARD) - (6) 1/0 - 750 MCM AL/CU
AutoCAD SHX Text
4. SWITCH NEUTRAL POLE IS SHOWN FOR REFERENCE.
AutoCAD SHX Text
213 [470]
AutoCAD SHX Text
190 [420]
AutoCAD SHX Text
APPROX. SHIPPING WT.: KG [LBS]
AutoCAD SHX Text
252 [555]
AutoCAD SHX Text
274 [605]
AutoCAD SHX Text
TRANSITION
AutoCAD SHX Text
STANDARD
AutoCAD SHX Text
PROGRAMMED
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
6.4 X 101.6
AutoCAD SHX Text
BOLTING SURFACE
AutoCAD SHX Text
BUS BAR PER PHASE
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182H.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KCS/KCP
AutoCAD SHX Text
STANDARD, PROGRAMMED TRANSITION
AutoCAD SHX Text
FRONT CONNECTED
AutoCAD SHX Text
1600-2000 AMPS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 8-18 WAS 8-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(C-7) STANDARD WAS OPEN; (A-8) STANDARD WAS OPEN; (A-2)
AutoCAD SHX Text
MODEL KCS/KCP WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
AutoCAD SHX Text
STANDARD TRANSITION WITHOUT THIS COVER
AutoCAD SHX Text
PROGRAMMED TRANSITION WITH THIS COVER.
AutoCAD SHX Text
BUS TERMINATION DETAIL A (TYP.)
AutoCAD SHX Text
OR 3 POLES W / (SEE NOTE: "2")
AutoCAD SHX Text
FRONT VIEW
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
14.2 X 19.1 [.56 X .75] SLOT REF. (4 HOLE PER. PLATE)
AutoCAD SHX Text
10.4 [.41](2 HOLE PER. PLATE)
AutoCAD SHX Text
NEUTRAL (N)
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
(SEE NOTE: "2")
AutoCAD SHX Text
12.7 [.50]6 PLACES FOR MOUNTING
AutoCAD SHX Text
1. THE STANDARD SWITCH CONFIGURATION IS FOR TOP EMERGENCY & LOAD AND BOTTOM
AutoCAD SHX Text
NORMAL. (REFER TO THE WIRING DIAGRAM FURNISHED WITH EACH TRANSFER SWITCH TO
AutoCAD SHX Text
DETERMINE TERMINATION POSITIONS.)
AutoCAD SHX Text
3. WHEN INSTALLING CONDUCTORS, CONNECT TO SIMILARLY MARKED PHASES OF NORMAL,
AutoCAD SHX Text
2. A FULL RATED NEUTRAL CONNECTION FOR EACH SOURCE AND THE LOAD IS OPTIONAL.
AutoCAD SHX Text
5. MAINTAIN ELECTRICAL CLEARANCE OF 25.4 [1.00] BETWEEN LIVE METAL PARTS
AutoCAD SHX Text
4. ALL INTERNAL CONNECTIONS ARE MADE AT FACTORY.
AutoCAD SHX Text
INSIDE, REAR OF THE DOOR. A MINIMUM DEPTH OF 152.4 [6.00] IS REQUIRED
AutoCAD SHX Text
SWITCH UNIT ON THE INSIDE BACK SURFACE OF THE ENCLOSURE.
AutoCAD SHX Text
6. WHEN MOUNTING THE TRANSFER SWITCH IN AN ENCLOSURE, MOUNT THE TRANSFER
AutoCAD SHX Text
7. THE CONTROL PANEL(S) IS CONNECTED TO THE TRANSFER SWITCH BY A HARNESS
AutoCAD SHX Text
WITH A QUICK DISCONNECT PLUG(S). THE HARNESS EXITS THE TRANSFER SWITCH
AutoCAD SHX Text
PROGRAMMED
AutoCAD SHX Text
STANDARD
AutoCAD SHX Text
TRANSITION
AutoCAD SHX Text
329 [725]
AutoCAD SHX Text
300 [660]
AutoCAD SHX Text
APPROX. SHIPPING WT.: KG [LBS]
AutoCAD SHX Text
213 [470]
AutoCAD SHX Text
243 [535]
AutoCAD SHX Text
EMERGENCY, & LOAD.
AutoCAD SHX Text
AND GROUNDED METAL.
AutoCAD SHX Text
BETWEEN THE TRANSFER SWITCH AND THE REAR DOOR WHEN THE DOOR IS CLOSED.
AutoCAD SHX Text
THE CONTROL(S) PANEL AND OPERATOR CONTROLS SHOULD BE MOUNTED ON THE
AutoCAD SHX Text
ON THE RIGHT SIDE.
AutoCAD SHX Text
2600 & 3000
AutoCAD SHX Text
MIN. REQUIRED ENCLOSURE SIZE
AutoCAD SHX Text
1524 [60]
AutoCAD SHX Text
965 [38]
AutoCAD SHX Text
2286 [90]
AutoCAD SHX Text
NEW DRAWING [78667]
AutoCAD SHX Text
DIMENSIONS IN [ ] ARE INCHES.
AutoCAD SHX Text
NOTE: CONSULT FACTORY FOR OTHER CABLING & TERMINATION REQUIREMENTS.
AutoCAD SHX Text
SCREW TYPE (STANDARD) - (12) 1/0 - 750 MCM AL/CU
AutoCAD SHX Text
CABLE ACCOMODATIONS (PER PHASE & NEUTRAL)
AutoCAD SHX Text
2600 & 3000
AutoCAD SHX Text
BOLTING SURFACE
AutoCAD SHX Text
BUS BAR PER PHASE
AutoCAD SHX Text
9.4 X 127.0 [.38 X 5.0]
AutoCAD SHX Text
SEE DETAIL A
AutoCAD SHX Text
SURFACE FINISH
AutoCAD SHX Text
PROJECTION
AutoCAD SHX Text
THIRD ANGLE
AutoCAD SHX Text
METRIC CAD FILE
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
PLOTTED DATE
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED -
AutoCAD SHX Text
1) DIMENSIONS ARE IN MILLIMETERS
AutoCAD SHX Text
2) TOLERANCES ARE:
AutoCAD SHX Text
ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
AutoCAD SHX Text
MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK.
AutoCAD SHX Text
THIS DRAWING, IN DESIGN AND DETAIL, IS KOHLER CO. PROPERTY AND
AutoCAD SHX Text
POWER SYSTEMS, KOHLER, WI 53044 U.S.A.
AutoCAD SHX Text
DIMENSION PRINT
AutoCAD SHX Text
ADV7182J.DWG
AutoCAD SHX Text
ADV-7182
AutoCAD SHX Text
MODEL KCS/KCP
AutoCAD SHX Text
STANDARD, PROGRAMMED TRANSITION
AutoCAD SHX Text
2600-3000 AMPS
AutoCAD SHX Text
SHEETS 18 & 19 ADDED; [83876]
AutoCAD SHX Text
10-12-07
AutoCAD SHX Text
(A-1) 9-18 WAS 9-19; [88678]
AutoCAD SHX Text
SEE SHEET 5 [91374]
AutoCAD SHX Text
(C-7) STANDARD WAS OPEN; (A-8) STANDARD WAS OPEN; (A-2)
AutoCAD SHX Text
MODEL KCS/KCP WAS MODEL K1, STANDARD WAS OPEN; [CT156425]
