Super Gypsum Plaster One Coat ( 25kg Bag ) Super Gypsum Plaster One Coat A ready mix gypsum based internal plaster, for

direct application on brick / block walls & RCC surfaces. is supplied in 25kg. laminated HDPE bags and have a shelf life of 3 months. Our range of Super Gypsum Plaster One Coat is premixed, ready to use plaster made from calcium sulphate hemi hydrate to which additives are added to improve its performance.

Super Gypsum Plaster One Coat is a ready mix plaster to which only water is to be

added for its preparation. The surface where the products is to be applied is slightly wetted and mixture of gypsum plaster and water is applied directly on the brick wall, once the level and plumb is taken.

Super Gypsum Plaster One Coat is extremely easy to use. In fact the ease of application of the product can be gauged by the fact that, the leveling and application of Super Gypsum Plaster One Coat can be done by normal plaster of Paris workers.

The quality of the product is reflected In the finish that is evident after the product

application is over. This is specially formulated to suit Indian climatic / site working conditions. The in built unique properties are:- 1.Low Density Higher Coverage : Its density is low to provide better coverage maintaining its all in built properties. The coverage of Super Gypsum Plaster One Coat is app. 16-18 sqft. Per bag in normal 12 mm thickness. 2. Gradual Setting With No Shrinkage Cracks : Once plaster attains strength, it does not suffer from inherent shrinkage cracks. The setting time of Super Gypsum Plaster One Coat is app. 20-25 minutes, after mixing with water. The setting progresses evenly & gradually until the surface is hard enough to receive a final stroke of trowel, at app 20-25 minutes. 3. No Water Curing Required : Plaster does nor require any water curing after the application, thus saves time, water consumption & manpower. This helps to complete project faster. 4. Strong Bonding & Good Strength : It sets hard in a matter of hours, to ensure continuity of work. Also it attains maximum strength on drying. After it is completely dry, it also attains strong bonding with most solid backgrounds. 5. Easy Workability : It has been formulated for easy to mix, to be spread & applied by normal POP workers by normal hand application prevailing practice, in trade.

6. Thickness : The thickness of plaster is recommended to be 12 mm on uneven background but should not exceed 10 mm on level & even background. If thickness is more than 12 mm, it should be applied in two subsequent applications. 7. In Built Properties : Plaster is non-combustible having very low thermal conductivity (k-value). Thus lends good thermal insulation to walls surface.