Embed Size (px)
Citation preview
204 Specifications subject to change without notice.
SUCTION CUPS B
B5SUCTION CUP WITH SHORT BELLOWS
Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface.Suitable for level adjustment.Suction cups of conductive silicone are suitable for objects with sensitivity to static electricity.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
MATERIAL RESISTANCE
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g0.30 0.80 1.0 — — — 0.05 1.5 1.5 0.11
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 50 -40–110Silicone, SIL Red 50 -40–200Conductive silicone, CSIL Black 50 -55–230
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentConductive silicone, CSIL Good Poor Excellent Fair Poor Poor Good Excellent
Complete suction cups Art. No.Suction cup B5 Chloroprene, M5 male 3250082Suction cup B5 Silicone, M5 male 3250082SSuction cup B5 Conductive silicone, M5 male 3250082SC
Rubber parts Art. No.Suction cup B5 Chloroprene 3150286Suction cup B5 Silicone 3150286SSuction cup B5 Conductive silicone 3150286SC
Fittings Art. No.Fitting M5 male 3107031
5.6O
12.7
6.2O
SW7
M5No.10(3/16)UNF
4
5.66.2
9.2
Specifications subject to change without notice. 205
SUCTION CUPS B
Suc
tion
cup
sB
B8SUCTION CUP WITH SHORT BELLOWS
Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface.Suitable for level adjustment.Suction cups of conductive silicone are suitable for objects with sensitivity to static electricity.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
MATERIAL RESISTANCE
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g0.80 1.6 2.5 — — — 0.15 1.9 3.5 0.3
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 50 -40–110Silicone, SIL Red 50 -40–200Conductive silicone, CSIL Black 50 -55–230
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentConductive silicone, CSIL Good Poor Excellent Fair Poor Poor Good Excellent
Complete suction cups Art. No.Suction cup B8 Chloroprene, M5 male 3250083Suction cup B8 Silicone, M5 male 3250083SSuction cup B8 Conductive silicone, M5 male 3250083SC
Rubber parts Art. No.Suction cup B8 Chloroprene 3150287Suction cup B8 Silicone 3150287SSuction cup B8 Conductive silicone 3150287SC
Fittings Art. No.Fitting M5 male 3107031
8.8
15.4
4
M5No.10(3/16)UNF
9.6
8.89.6
11.9
206 Specifications subject to change without notice.
SUCTION CUPS B
B10-2SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment.Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
MATERIAL RESISTANCE
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max. vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g1.5 3.4 4.9 — — — 0.48 4.0 4.5 1.0
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 60 -40–110Silicone, SIL Red 50 -40–200
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Complete suction cups Art. No.Suction cup B10-2 Chloroprene, M5 male 3150023Suction cup B10-2 Silicone, M5 male 3150023S
Rubber parts Art. No.Suction cup B10-2 Chloroprene 3150101Suction cup B10-2 Silicone 3150101S
Fittings Art. No.Fitting M5 male 3107030
11
M5No.10(3/16)UNF
21.4
3.5
12
Specifications subject to change without notice. 207
SUCTION CUPS B
Suc
tion
cup
sB
B15-2SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment.Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
MATERIAL RESISTANCE
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g2.9 5.9 8.9 — — — 1.1 5.0 6.5 1.5
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 60 -40–110Silicone, SIL Red 50 -40–200
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Complete suction cups Art. No.Suction cup B15-2 Chloroprene, M5 male 3250037Suction cup B15-2 Silicone, M5 male 3250037S
Rubber parts Art. No.Suction cup B15-2 Chloroprene 3150230Suction cup B15-2 Silicone 3150230S
Fittings Art. No.Fitting M5 male 3107030
17.515.7
24.8
3.5
M5No.10(3/16)UNF
17.5
19.8
15.7
208 Specifications subject to change without notice.
SUCTION CUPS B
B20SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
MATERIAL RESISTANCE
ORDERING INFORMATION
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g5.9 9.8 14 — — — 2.7 10 10 3.2
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 60 -40–110Silicone, SIL Red 50 -40–200
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Complete suction cups Art. No.A Suction cup B20 Chloroprene, M5 female 0101160A Suction cup B20 Chloroprene, M5 female, with dual flow control valve 0101166B Suction cup B20 Chloroprene, G1/8" male, with mesh filter 0101161B Suction cup B20 Chloroprene, G1/8" male, with mesh filter and dual flow control valve 0101167C Suction cup B20 Chloroprene, G1/8" male/M5 female, with mesh filter 0101165C Suction cup B20 Chloroprene, G1/8" male/M5 female, with dual flow control valve 0101169D Suction cup B20 Chloroprene, 5xM5 female 0101164D Suction cup B20 Chloroprene, 5xM5 female, with dual flow control valve 0101170A Suction cup B20 Silicone, M5 female 0101171A Suction cup B20 Silicone, M5 female, with dual flow control valve 0101177B Suction cup B20 Silicone, G1/8" male, with mesh filter 0101172B Suction cup B20 Silicone, G1/8" male, with mesh filter and dual flow control valve 0101178C Suction cup B20 Silicone, G1/8" male/M5 female, with mesh filter 0101176C Suction cup B20 Silicone, G1/8" male/M5 female, with dual flow control valve 0101180D Suction cup B20 Silicone, 5xM5 female 0101175D Suction cup B20 Silicone, 5xM5 female, with dual flow control valve 0101181E Suction cup B20 Chloroprene, G1/8" male/M5 female, PA 0110949E Suction cup B20 Silicone, G1/8" male/M5 female, PA 0110336
Specifications subject to change without notice. 209
SUCTION CUPS B
Suc
tion
cup
sB
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
A B C D
E
Rubber parts Art. No.Suction cup B20 Chloroprene 0101101Suction cup B20 Silicone 0101102
Fittings Art. No.Fitting M5 female 3250003Fitting M5 female, with dual flow control valve 3251001Fitting G1/8" male, with mesh filter 3250085Fitting G1/8" male, with mesh filter and dual flow control valve 3251002Fitting G1/8" male/M5 female, with mesh filter 0101152Fitting G1/8" male/M5 female, with dual flow control valve 3251004Fitting 5xM5 female 0100260Fitting 5xM5 female, with dual flow control valve 3251005Fitting G1/8" male/M5 female, PA 3150196
22
2424
7
G1/8"
22
28
5x M5
24
210 Specifications subject to change without notice.
SUCTION CUPS B
B30-2SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
*For a shorter period of time up to 160°C.
MATERIAL RESISTANCE
ORDERING INFORMATION
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g12.0 22.0 27 — — — 10 15 15 7.0
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 60 -40–110Silicone, SIL Red 50 -40–200HNBR Grey-blue 75 -30–140*
Material Wearresistance
Oil Weather& Ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentHNBR Excellent Excellent Excellent Good Excellent Fair Good Excellent
Complete suction cups Art. No.A Suction cup B30-2 Chloroprene, 1/8"NPSF female, with mesh filter 0101423A Suction cup B30-2 Chloroprene, 1/8"NPSF female, with dual flow control valve 0101424B Suction cup B30-2 Chloroprene, G1/4" male, with mesh filter 0101418B Suction cup B30-2 Chloroprene, G1/4" male, with mesh filter dual flow control valve 0101425C Suction cup B30-2 Chloroprene, G3/8" male, with mesh filter 0101420C Suction cup B30-2 Chloroprene, G3/8" male, with mesh filter and dual flow control valve 0101427D Suction cup B30-2 Chloroprene, 5x1/8"NPSF female 0101422D Suction cup B30-2 Chloroprene, 5x1/8"NPSF female, with dual flow control valve 0101429A Suction cup B30-2 Silicone, 1/8"NPSF female, with mesh filter 0101436A Suction cup B30-2 Silicone, 1/8"NPSF female, with dual flow control valve 0101437B Suction cup B30-2 Silicone, G1/4" male, with mesh filter 0101431B Suction cup B30-2 Silicone, G1/4" male, with mesh filter and dual flow control valve 0101438C Suction cup B30-2 Silicone, G3/8" male, with mesh filter 0101433C Suction cup B30-2 Silicone, G3/8" male, with mesh filter and dual flow control valve 0101440D Suction cup B30-2 Silicone, 5x1/8"NPSF female 0101435D Suction cup B30-2 Silicone, 5x1/8"NPSF female, with dual flow control valve 0101442A Suction cup B30-2 HNBR, 1/8"NPSF female, with mesh filter 0108078B Suction cup B30-2 HNBR, G1/4" male, with mesh filter 0108167C Suction cup B30-2 HNBR, G3/8" male, with mesh filter 0108168
Specifications subject to change without notice. 211
SUCTION CUPS B
Suc
tion
cup
sB
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
E Suction cup B30-2 Chloroprene, 1/8"NPSF female, PA 0109845E Suction cup B30-2 Silicone, 1/8"NPSF female, PA 0110343
A B C D
E
Rubber parts Art. No.Suction cup B30-2 Chloroprene 0101103Suction cup B30-2 Silicone 0101104Suction cup B30-2 HNBR 0108077
Fittings Art. NoFitting 1/8"NPSF female, with mesh filter 0101153Fitting 1/8"NPSF female, with dual flow control valve 3251006Fitting G1/4" male, with mesh filter 3250091Fitting G1/4" male, with mesh filter and dual flow control valve 3251007Fitting G3/8" male, with mesh filter 3250086Fitting G3/8" male, with mesh and dual flow control valve 3251009Fitting 5x1/8"NPSF female 0100261Fitting 5x1/8"NPSF female, with dual flow control valve 3251011Fitting 1/8"NPSF female, PA 3150197
Complete suction cups Art. No.
3436
9
G1/4"
32
212 Specifications subject to change without notice.
SUCTION CUPS B
B40SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
*For a shorter period of time up to 160°C.
MATERIAL RESISTANCE
ORDERING INFORMATION
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g22.0 39 49 — — — 15 20 12 10.0
Material Colour Hardness°Shore A
Temperature range°C
Chloroprene, CR Black 60 -40–110Silicone, SIL Red 50 -40–200HNBR Grey-blue 75 -30–140*
Material Wearresistance
Oil Weather& Ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Chloroprene, CR Excellent Fair Good Good Fair Poor Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentHNBR Excellent Excellent Excellent Good Excellent Fair Good Excellent
Complete suction cups Art. No.A Suction cup B40 Chloroprene, 1/8"NPSF female, with mesh filter 0101462A Suction cup B40 Chloroprene, 1/8"NPSF female, with dual flow control valve 0101463B Suction cup B40 Chloroprene, G1/4" male, with mesh filter 0101457B Suction cup B40 Chloroprene, G1/4" male, with mesh filter and dual flow control valve 0101464C Suction cup B40 Chloroprene, G3/8" male, with mesh filter 0101459C Suction cup B40 Chloroprene, G3/8" male, with mesh filter and dual flow control valve 0101466D Suction cup B40 Chloroprene, 5x1/8"NPSF female 0101461D Suction cup B40 Chloroprene, 5x1/8"NPSF female, with dual flow control valve 0101468A Suction cup B40 Silicone, 1/8"NPSF female, with mesh filter 0101475A Suction cup B40 Silicone, 1/8"NPSF female, with dual flow control valve 0101476B Suction cup B40 Silicone, G1/4" male, with mesh filter 0101470B Suction cup B40 Silicone, G1/4" male, with mesh filter and dual flow control valve 0101477C Suction cup B40 Silicone, G3/8" male, with mesh filter 0101472C Suction cup B40 Silicone, G3/8" male, with mesh filter and dual flow control valve 0101479D Suction cup B40 Silicone, 5x1/8"NPSF female 0101474D Suction cup B40 Silicone, 5x1/8"NPSF female, with dual flow control valve 0101481A Suction cup B40 HNBR, 1/8"NPSF female, with mesh filter 0108082B Suction cup B40 HNBR, G1/4" male, with mesh filter 0108169C Suction cup B40 HNBR, G3/8" male, with mesh filter 0108170E Suction cup B40 Chloroprene, 1/8"NPSF female, PA 0109843E Suction cup B40 Silicone, 1/8"NPSF female PA 0110337
Specifications subject to change without notice. 213
SUCTION CUPS B
Suc
tion
cup
sB
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
A B C D
E
Rubber parts Art. No.Suction cup B40 Chloroprene 0101105Suction cup B40 Silicone 0101106Suction cup B40 HNBR 0108081
Fittings Art. NoFitting 1/8"NPSF female, with mesh filter 0101153Fitting 1/8"NPSF female, with dual flow control valve 3251006Fitting G1/4" male, with mesh filter 3250091Fitting G1/4" male, with mesh filter and dual flow control valve 3251007Fitting G3/8" male, with mesh filter 3250086Fitting G3/8" male, with mesh and dual flow control valve 3251009Fitting 5x1/8"NPSF female 0100261Fitting 5x1/8"NPSF female, with dual flow control valve 3251011Fitting 1/8"NPSF female, PA 3150197
214 Specifications subject to change without notice.
SUCTION CUPS B
B50SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
* For a shorter period of time up to +160°C
MATERIAL RESISTANCE
ORDERING INFORMATION
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g33 65 82 — — — 32 30 19 20.0
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90Silicone, SIL Red 50 -40–200HNBR Grey-blue 75 -30–140*
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentHNBR Excellent Excellent Excellent Good Excellent Fair Good Excellent
Complete suction cups Art. No.A Suction cup B50 Nitrile-PVC, 1/8"NPSF female, with mesh filter 0101649A Suction cup B50 Nitrile-PVC, 1/8"NPSF female, with dual flow control valve 0101650B Suction cup B50 Nitrile-PVC, G1/4" male, with mesh filter 0101644B Suction cup B50 Nitrile-PVC, G1/4" male, with mesh filter and dual flow control valve 0101651C Suction cup B50 Nitrile-PVC, G3/8" male, with mesh filter 0101646C Suction cup B50 Nitrile-PVC, G3/8" male, with mesh filter and dual flow control valve 0101653D Suction cup B50 Nitrile-PVC, 5x1/8"NPSF female 0101648D Suction cup B50 Nitrile-PVC, 5x1/8"NPSF female, with dual flow control valve 0101655A Suction cup B50 Silicone, 1/8"NPSF female, with mesh filter 0101636A Suction cup B50 Silicone, 1/8"NPSF female, with dual flow control valve 0101637B Suction cup B50 Silicone, G1/4" male, with mesh filter 0101631B Suction cup B50 Silicone, G1/4" male, with mesh filter and dual flow control valve 0101638C Suction cup B50 Silicone, G3/8" male, with mesh filter 0101633C Suction cup B50 Silicone, G3/8" male, with mesh filter and dual flow control valve 0101640D Suction cup B50 Silicone, 5x1/8"NPSF female 0101635D Suction cup B50 Silicone, 5x1/8"NPSF female, with dual flow control valve 0101642A Suction cup B50 HNBR, 1/8"NPSF female, with mesh filter 0108171B Suction cup B50 HNBR, G1/4" male, with mesh filter 0108172C Suction cup B50 HNBR, G3/8" male, with mesh filter 0108173E Suction cup B50 Nitrile-PVC, 1/8"NPSF female, PA 0111063
Specifications subject to change without notice. 215
SUCTION CUPS B
Suc
tion
cup
sB
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
A B C D
E
Rubber parts Art. No.Suction cup B50 Silicone 0101108Suction cup B50 Nitrile-PVC 0101107Suction cup B50 HNBR 0108165
Fittings Art. NoFitting 1/8"NPSF female, with mesh filter 0101154Fitting 1/8"NPSF female, with dual flow control valve 3251012Fitting G1/4" male, with mesh filter 3250092Fitting G1/4" male, with mesh filter and dual flow control valve 3251013Fitting G3/8" male, with mesh filter 3250087Fitting G3/8" male, with mesh filter and dual flow control valve 3251015Fitting 5x1/8"NPSF female 0100262Fitting 5x1/8"NPSF female, with dual flow control valve 3251017Fitting 1/8"NPSF female, PA 3150198
58
3
216 Specifications subject to change without notice.
SUCTION CUPS B
B50-2SUCTION CUP WITH SHORT BELLOWS AND FILTER
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
* Filter disc max. 80°C
MATERIAL RESISTANCE
ORDERING INFORMATION
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g33 65 82 — — — 32 30 19 20.0
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90*Silicone, SIL Red 50 -40–200*
Material Wearresistance
Oil Weather& Ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Complete suction cups Art. NoA Suction cup B50-2 Nitrile-PVC with filter, 1/8"NPSF female, with mesh filter 0101675A Suction cup B50-2 Nitrile-PVC with filter, 1/8"NPSF female, with dual flow control valve 0101676B Suction cup B50-2 Nitrile-PVC with filter, G1/4" male, with mesh filter 0101670B Suction cup B50-2 Nitrile-PVC with filter, G1/4" male, with dual flow control valve and mesh filter 0101677C Suction cup B50-2 Nitrile-PVC with filter, G3/8" male, with mesh filter 0101672C Suction cup B50-2 Nitrile-PVC with filter, G3/8" male, with dual flow control valve and mesh filter 0101679D Suction cup B50-2 Nitrile-PVC with filter, 5x1/8"NPSF female 0101674D Suction cup B50-2 Nitrile-PVC with filter, 5x1/8"NPSF female, with dual flow control valve 0101681A Suction cup B50-2 Silicone with filter, 1/8"NPSF female, with mesh filter 0101662A Suction cup B50-2 Silicone with filter, 1/8"NPSF female, with dual flow control valve 0101663B Suction cup B50-2 Silicone with filter, G1/4" male, with mesh filter 0101657B Suction cup B50-2 Silicone with filter, G1/4" male, with dual flow control valve and mesh filter 0101664C Suction cup B50-2 Silicone with filter, G3/8" male, with mesh filter 0101659C Suction cup B50-2 Silicone with filter, G3/8" male, with dual flow control valve and mesh filter 0101666D Suction cup B50-2 Silicone with filter, 5x1/8"NPSF female 0101661D Suction cup B50-2 Silicone with filter, 5x1/8"NPSF female, with dual flow control valve 0101668E Suction cup B50-2 Nitrile-PVC with filter, 1/8"NPSF female, PA 0110957E Suction cup B50-2 Silicone with filter, 1/8"NPSF female, PA 0110347
Specifications subject to change without notice. 217
SUCTION CUPS B
Suc
tion
cup
sB
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
A B C D
E
Rubber parts Art. No.Suction cup B50-2 Nitrile-PVC with filter 0101109Suction cup B50-2 Silicone with filter 0101110
Fittings Art. NoFitting 1/8"NPSF female, with mesh filter 0101154Fitting 1/8"NPSF female, with dual flow control valve 3251012Fitting G1/4" male, with mesh filter 3250092Fitting G1/4" male, with mesh filter and dual flow control valve 3251013Fitting G3/8" male, with mesh filter 3250087Fitting G3/8" male, with mesh filter and dual flow control valve 3251015Fitting 5x1/8"NPSF female 0100262Fitting 5x1/8"NPSF female, with dual flow control valve 3251017Fitting 1/8"NPSF female, PA 3150198
Spare Part Material Temperature range°C
Art. No.
Filter for B50-2 Polyethylene, PE -40–80 3150243
35.
52
218 Specifications subject to change without notice.
SUCTION CUPS B
B75SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
* For a shorter period of time up to +160°C
MATERIAL RESISTANCE
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min.curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g74 167 226 — — — 110 40 24 35
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90Silicone, SIL Red 50 -40–200HNBR Grey-blue 75 -30–140*
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentHNBR Excellent Excellent Excellent Good Excellent Fair Good Excellent
Specifications subject to change without notice. 219
SUCTION CUPS B
Suc
tion
cup
sB
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Complete suction cups Art. No.Suction cup B75 Nitrile-PVC, 1/8"NPSF female, with mesh filter 0101854Suction cup B75 Nitrile-PVC, G3/8" female, with mesh filter 0101855Suction cup B75 Nitrile-PVC, 3/8"NPSF female, with mesh filter 0101856Suction cup B75 Nitrile-PVC, G1/2" female, with mesh filter 0101857Suction cup B75 Silicone, 1/8"NPSF female, with mesh filter 0101850Suction cup B75 Silicone, G3/8" female, with mesh filter 0101851Suction cup B75 Silicone, 3/8"NPSF female, with mesh filter 0101852Suction cup B75 Silicone, G1/2" female, with mesh filter 0101853Suction cup B75 HNBR, 1/8"NPSF female, with mesh filter 0108174Suction cup B75 HNBR, G3/8" female, with mesh filter 0108175Suction cup B75 HNBR, 3/8"NPSF female, with mesh filter 0108176Suction cup B75 HNBR, G1/2" female, with mesh filter 0108177
Rubber parts Art. No.Suction cup B75 Nitrile-PVC 3150107PSuction cup B75 Silicone 3150107SSuction cup B75 HNBR 3150107T
Fittings Art. No.Fitting 1/8"NPSF female, with mesh filter 0100548Fitting G3/8" female, with mesh filter 0100551Fitting 3/8"NPSF female, with mesh filter 0100553Fitting G1/2" female, with mesh filter 0100555
220 Specifications subject to change without notice.
SUCTION CUPS B
B75-2SUCTION CUP WITH SHORT BELLOWS AND FILTER
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
* Filter disc max. 80°C
MATERIAL RESISTANCE
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min.curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g74 167 226 — — — 110 40 24 35
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90*Silicone, SIL Red 50 -40–200*
Material Wearresistance
Oil Weather& Ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Specifications subject to change without notice. 221
SUCTION CUPS B
Suc
tion
cup
sB
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Complete suction cups Art. No.Suction cup B75-2 Nitrile-PVC with filter, 1/8"NPSF female, with mesh filter 0101862Suction cup B75-2 Nitrile-PVC with filter, G3/8" female, with mesh filter 0101863Suction cup B75-2 Nitrile-PVC with filter, 3/8"NPSF female, with mesh filter 0101864Suction cup B75-2 Nitrile-PVC with filter, G1/2" female, with mesh filter 0101865Suction cup B75-2 Silicone with filter, 1/8"NPSF female, with mesh filter 0101858Suction cup B75-2 Silicone with filter, G3/8" female, with mesh filter 0101859Suction cup B75-2 Silicone with filter, 3/8"NPSF female, with mesh filter 0101860Suction cup B75-2 Silicone, G1/2" female, with mesh filter 0101861
Rubber parts Art. No.Suction cup B75-2 Nitrile-PVC with filter 0101942Suction cup B75-2 Silicone with filter 0101943
Fittings Art. No.Fitting 1/8"NPSF female, with mesh filter 0100548Fitting G3/8" female, with mesh filter 0100551Fitting 3/8"NPSF female, with mesh filter 0100553Fitting G1/2" female, with mesh filter 0100555
Spare Part Material Temperature range°C
Art. No.
Filter for B75-2 Polyethylene, PE -40–80 3150244
37
222 Specifications subject to change without notice.
SUCTION CUPS B
B110SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
* For a shorter period of time up to +160°C
MATERIAL RESISTANCE
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g137 343 461 — — — 310 60 35 120
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90Silicone, SIL Red 50 -40–200HNBR Grey-blue 75 -30–140*
Material Wearresistance
Oil Weather& ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good ExcellentHNBR Excellent Excellent Excellent Good Excellent Fair Good Excellent
Specifications subject to change without notice. 223
SUCTION CUPS B
Suc
tion
cup
sB
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Complete suction cups Art. No.Suction cup B110 Nitrile-PVC, G3/8" female, with mesh filter 0101890Suction cup B110 Nitrile-PVC, 3/8"NPSF female, with mesh filter 0101891Suction cup B110 Nitrile-PVC, G1/2" female, with mesh filter 0101892Suction cup B110 Silicone, G3/8" female, with mesh filter 0101884Suction cup B110 Silicone, 3/8"NPSF female, with mesh filter 0101885Suction cup B110 Silicone, G1/2" female, with mesh filter 0101886Suction cup B110 HNBR, G3/8" female, with mesh filter 0108178Suction cup B110 HNBR, G1/2" female, with mesh filter 0108180Suction cup B110 HNBR, 3/8"NPSF female, with mesh filter 0108179
Rubber parts Art. No.Suction cup B110 Nitrile-PVC 3150108PSuction cup B110 Silicone 3150108SSuction cup B110 HNBR 3150108T
Fittings Art. No.Fitting G3/8" female, with mesh filter 0100557Fitting G1/2" female, with mesh filter 0100561Fitting 3/8"NPSF female, with mesh filter 0100559
124
54.3
115
224 Specifications subject to change without notice.
SUCTION CUPS B
B110-2SUCTION CUP WITH SHORT BELLOWS AND FILTER
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.Lifting movement to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
* Filter disc max. 80°C
MATERIAL RESISTANCE
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g137 343 461 — — — 310 60 35 120
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90*Silicone, SIL Red 50 -40–200*
Material Wearresistance
Oil Weather& Ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Specifications subject to change without notice. 225
SUCTION CUPS B
Suc
tion
cup
sB
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Complete suction cups Art. No.Suction cup B110-2 Nitrile-PVC with filter, G3/8" female, with mesh filter 0101902Suction cup B110-2 Nitrile-PVC with filter, 3/8"NPSF female, with mesh filter 0101903Suction cup B110-2 Nitrile-PVC with filter, G1/2" female, with mesh filter 0101904Suction cup B110-2 Silicone with filter, G3/8" female, with mesh filter 0101896Suction cup B110-2 Silicone with filter, 3/8"NPSF female, with mesh filter 0101897Suction cup B110-2 Silicone with filter, G1/2" female, with mesh filter 0101898
Rubber parts Art. No.Suction cup B110-2 Nitrile-PVC with filter 0101944Suction cup B110-2 Silicone with filter 0101945
Fittings Art. No.Fitting G3/8" female, with mesh filter 0100557Fitting G1/2" female, with mesh filter 0100561Fitting 3/8"NPSF female, with mesh filter 0100559
Spare Part Material Temperature range°C
Art. No.
Filter for B110-2 Polyethylene, PE -40–80 3150249
/8 G1/ "/ "
70.
12O
5
226 Specifications subject to change without notice.
SUCTION CUPS B
B150SUCTION CUP WITH SHORT BELLOWS
Suitable for level adjustment. Several short bellows in one lifting device can handle objects with height differences and varying shapes, for example embossed or corrugated plates.The lifting movement can be used to separate small and thin objects.Only lightweight objects should be handled when the lifting force is parallel to the surface of the object, in order to achieve good precision and safe lifting movement.
LIFTING FORCES & TECHNICAL DATA
MATERIAL SPECIFICATIONS
MATERIAL RESISTANCE
Lifting force vertical to thesurface, N, at vacuum level
Lifting force parallel to thesurface, N, at vacuum level
Volume Min. curveradius
Max.vertical
movement
Weightrubberpart
20 -kPa 60 -kPa 90 -kPa 20 -kPa 60 -kPa 90 -kPa cm3 mm mm g294 686 883 — — — 650 75 45 265
Material Colour Hardness°Shore A
Temperature range°C
Nitrile-PVC, NPV Black 50 0–90Silicone, SIL Red 50 -40–200
Material Wearresistance
Oil Weather& Ozone
Hydrolysis Petrol Concentratedacids
Alcohol Oxidation
Nitrile-PVC, NPV Excellent Excellent Good Good Excellent Fair Good GoodSilicone, SIL Good Poor Excellent Fair Poor Poor Good Excellent
Specifications subject to change without notice. 227
SUCTION CUPS B
Suc
tion
cup
sB
ORDERING INFORMATION
For further information and dimensioned drawings, see SUCTION CUPS FITTINGS chapter.
Complete suction cups Art. No.Suction cup B150 Nitrile-PVC, G1/2" female, with mesh filter 0101931Suction cup B150 Nitrile-PVC, G3/4" female, with mesh filter 0101932Suction cup B150 Silicone, G1/2" female, with mesh filter 0101928Suction cup B150 Silicone, G3/4" female, with mesh filter 0101929
Rubber parts Art. No.Suction cup B150 Nitrile-PVC 3150109PSuction cup B150 Silicone 3150109S
Fittings Art. No.Fitting G1/2" female, with mesh filter 0100564Fitting G3/4" female, with mesh filter 0100567
![Manipulation with Suction Cups using External ContactsManipulation with Suction Cups using External Contacts 3 for soft ngertips [6,7,8]. Speci cally, Xydas et al. veri ed that the](https://img.pdfslide.us/doc/110x75/5ff780768c17903a2b06f843/manipulation-with-suction-cups-using-external-contacts-manipulation-with-suction.jpg)
