Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Measure Coating Thickness Early in Your Process
CoatMaster
140 µm coating thickness
5 – 50 cm measurement distance
Powder Coated Parts – before or after curing
Thermal Spray Coatings
Painted Parts – before or after drying
Applications
Process Control – Detect and correct process deviations in real-time
Material Savings – Save up to 30% in material costs
Quality Improvement – Reduce coating defects and improve part quality
Benefits
su proveedor de instrumentos para control de calidad
CoatMaster
su proveedor de instrumentos para control de calidad www.neurtek.com Rev.00 / Pág. 1
NEURTEK Tlf. 902 42 00 8 2
Inspect Without Touching – Our patented Advanced Thermal Optics (ATO) technology allows you to inspect the coating thickness of parts remotely, from a distance of 5 – 50 cm.
Inspect Parts in All Colors – Easily measure the thickness of all colors of coatings, with or without calibration, depending on your accuracy and process requirements.
Inspect Complex, Curved Shaped Parts – Find all coating defects, even in small, hard-to-reach areas of a part, on curved or inner surfaces and in corners.
Inspect In-Line in Real-Time – Instantly measure the coating thickness of parts as they move along your coating line, with real-time feedback for process control.
Inspect Parts Early in Your Process – You can even inspect parts that are coated with uncured powder coating or wet paint, for quality control at the earliest stages.
Inspect More Materials – Measure the thickness of coatings on the widest range of substrates: metal, wood, ceramics, plastic, CFRP, glass, etc.
Courtesy of AkzoNobel
Courtesy of Wagner
su proveedor de instrumentos para control de calidad
CoatMaster
su proveedor de instrumentos para control de calidad www.neurtek.com NEURTEK Tlf. 902 42 00 8 2
Rev.00 / Pág. 2