Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
mountaineering
Nature has long been the mother of invention in the Stubai Valley. For centuries the water flowing from the glaciers in the Stubai Alps has powered the hammers in our foundries. Today, those same amazing natural forces still provide our power as well as our inspiration.
Our team of expert climbers, guides and engineers are in constant communication, to share new ideas from mountain tours and to discuss improvements to our existing ranges.
Before we put any product on the market, our first task is to overcome all the emerging technical challenges. Any new equipment is then subjected to a thorough programme of rigorous testing. Only then is our equipment good enough for you.
Your satisfaction and opinion are both extremely important to us. You are a vital part of our chain, and we welcome any ideas and feedback that you might have about our products.
With best wishes for continued safe, enjoyable and rewarding adventures in the extraordinary world of mountains!
Yours
STUBAI BERGSPORT
4 Quickdraws
5-7 Karabiners
8 Via ferrata and helmets
9 Harnesses
10 Climbing accessories
11 Pitons
12-15 Crampons and accessories
16-17 Ice axes
18 Ice tools
19 Ice screws and accessories
20-21 Tour products
22-23 Steel karabiners and Skysports
www.stubai-bergsport.com
Content
4
Rock Clip Set
Ice Clip Set
Ice-Rock Clip Set
Supreme Set
Su
pre
me
Quick
draw
s
This set combines the advantages of the ICE CLIP and the ROCK CLIP. Available with standard or Dyneema slings in 110, 160 and 210 mm.For strength look at ICE CLIP and ROCK CLIP.Weight 96 g (for 110 mm Dyneema) Art. 97991. Standard Art. 97981. Dyneema
Quickdraws are an important part of the safety-chain in any kind of climb. Our range caters for all your demands, with its selection of different shapes of karabiners, gates and slings – whether for rock climbing, ice climbing or mountaineering. For the best possible protection, all our karabiners have anodized coatings.
The Top of The Range quickdraw from our state-of-the-art foundry. The karabiners are ergonomically designed for easy handling and hassle-free clipping, and guarantee smooth rope running. The Supreme also excels with its low weight and very high breaking strength – even with the gate open. Supplied with Dyneema slings in 110, 160 and 210 mm.
25 kN 10 kN 11 kN Weight 85 g (for 110 mm Dyneema) Art. 97950.
The Ice Clip quickdraw combines extreme light weight with high strength. The wire gate prevents potential icing in freezing wet conditions. Available with standard or Dyneema slings in 110, 160 and 210 mm.
30 kN 8 kN 10 kN Weight 92 g (for 110 mm Dyneema) Art. 97902. Standard Art. 97903. Dyneema
Reliable and rigorously-tested quickdraw with great handling – especially when unclipping. The Rock Clip is available with standard or Dyneema slings in 110, 160 and 210 mm.
25 kN 8 kN 10 kN Weight 100 g (for 110 mm Dyneema) Art. 97930. Standard Art. 97961. Dyneema
5
Supreme Rock ClipIce Clip
Kara
biner
s
30 kN 8 kN 10 kN
Weight 42 g
26 mm Art. 975010 with straight gate
28 mm Art. 975510 with bent gate
25 kN 8 kN 10 kN
Weight 46 g
20 mm Art. 974011 with straight gate
22 mm Art. 974511 with bent gate
25 kN 10 kN 11 kN
Weight 38 g
27 mm Art. 976000 with straight gate
29 mm Art. 976500 with bent gate
6
HMS Pro EasylockH
MS
HMS Pro Twistlock
HMS Pro Push & Twist
HMS 3D
The HMS-Karabiner with screw gate remains the most popular safety device. The brass screw over the precisely engineered thread guarantees reliability and easy handling. The eye-catching red anodized finish makes it especially useful as a central karabiner, and makes it last longer. With its easylock system clipping in and out is easier than ever!
24 kN 11 kN 8 kN 22 mmWeight 95 gArt. 977781Ka
rabin
ers
The Twistlock system is an auto-locking gate which opens with a simple 90 degree twist.
24 kN 11 kN 8 kN 23 mmWeight 109 gArt. 977731
The new Push & Twist system provides an extra level of safety. The karabiner can only be opened with a 90 degree twist if the barrel has been pushed up.
24 kN 11 kN 8 kN 21 mmWeight 113 gArt. 977799
The HMS 3D’s special shape prevents a running rope from touching the rock-face, regardless of the position of the karabiner.
22 kN 8 kN 6 kN 23 mmWeight 95 gArt. 977761
7
Alpha
Ferrata Connect
Ypsilon 3600
Ferrata
Ypsilon
Alpha Pro Push & Twist
Alpha Pro Twistlock
Alpha Pro
STUBAI offers a specially designed range of karabiners with various shapes and locking systems. Our use of finest grade materials and the most modern technology guarantees the highest possible quality of our products.
Modern, easy to use karabiner for use on via ferrata. The palm clip system of the Ferrata Connect can be easily engaged even by children. An extra large gate clearance is achieved by setting the gate down in the corner of the karabiner.
32 kN 14 kN 26 mmWeight 110 gArt. 977552
The Ypsilon 3600 with screwgate is the strongest aluminium karabiner in the STUBAI range. It is designed for use wherever you need extra strength.
36 kN 10 kN 14 kN 16 mmWeight 94 gArt. 973011
The Push & Twist system is for extra security. The karabiner can only be opened with a twist if the barrel has been pushed up.
30 kN 10 kN 12 kN 22 mmWeight 113 gArt. 977599
Similar to the Alpha Pro with screwgate, but opens with a simple 90 degree twist.
30 kN 10 kN 12 kN 24 mmWeight 109 gArt. 977531
The Alpha Pro with screwgate is a versatile karabiner with high strength and wide gate clearance.
30 kN 10 kN 12 kN 23 mmWeight 95 gArt. 977511
8
Ferrata
Ferrata Connect Basic
Flow Plus
Ferrata Connect Flex
Flow Plus
Fuse Light
Same spec as the FERRATA CONNECT FLEX, but with one velcro strap to secure the braking rope and without the elastic band.Weight 495 gArt. 988460
Via fe
rrata
Helm
ets
A light but robust moulded helmet which combines comfort with functionality. Size can be changed in seconds with the adjuster wheel, even with one hand. It has great ventilation, and padding both inside of the helmet and on the adjustable chin-strap. The ergonomic neck-line completes the Fuse Light’s features, and its shape means that there is no hindrance to vision – even when looking up. Also equipped with a handy headlamp holder.Size 54-62 cm (XS-XL)Weight 345 gArt. 900005 whiteArt. 900006 red
An extra-light helmet thanks to the use of Polycarbonate and In-Mould technology. Its ergonomic side and neck cut means you could almost forget you are wearing it. The Flow Plus has an adjustable chin-strap, and a simple adjuster wheel for a perfect fit. With good ventilation and a headlamp holder, it is equally useful in the heat of the day or the dark of the night.Size 54-62 cm (XS-XL) Weight 245 g Art. 900015
Y-form via ferrata set with Ferrata Connect karabiners. The brake rope is held by a double velcro strap to stop it from getting in the way when climbing and walking. The sling’s fastening strap attaches directly to your harness with a simple anchor knot. Elastic bands ‘swallow’ unused rope and prevent annoying tangling. The built-in brake softens any falls and reduces stress on both the body and the equipment.Weight 510 gArt. 988450
Absorbing a fall on a via ferrata puts your equipment under sudden and violent stress, and that’s why good quality gear is so important. At STUBAI, all our products are manufactured to combine maximum safety with ease of use and comfort. This philosophy naturally applies as standard throughout our range of helmets, harnesses and via ferrata sets.
9
Vario
DoubleRainbow
Combi
Utility
The Vario is a hybrid waist and chest harness. The waist harness can be detached to be used on its own if required. Low volume and weight make this an ideal harness for mountaineering, glacier touring or via ferrata tours. On the gear loop there is enough room for extra kit, and all straps are adjustable.Weight 515 gArt. 998020
Full harnesses (chest-waist combinations) prevent the wearer from tipping backwards in the event of a fall, and are aimed at rucksack wearers. Since the majority of falls occur whilst sport climbing, our sports harnesses are padded in the hip and thigh area. Alpine climbers require more equipment, so we have provided their harnesses with more gear loops.
A special children’s climbing harness. Equipped with 2 loops for gear and one more for the chalkbag. Fits waists of 50-65 cm.Weight 330 gArt. 998050
Harn
esse
sA sport climbing harness with 4 gear loops and an extra loop for attaching a chalkbag. With 4 buckles, the Double can be quickly adjusted to fit different sizes. This harness is very comfortable and extremely light.Weight 450 g (XS-M)Art. 998030 XS-MArt. 998035 L-XXL
The Combi is a very comfortable and easily adjustable harness combination, developed specially for via ferrata use. As you do not need much equipment on a via ferrata, this harness only requires two loops.Weight 675 gArt. 998025
A general purpose adjustable chest harness. The Utility is compatible with sport climbing waist harnesses. CAUTION: Never wear a chest harness on its own!Weight 205 gArt. 998018
10
Vertical
Vertical
Belay Plus
Stubai BC
Standard
Attach
Easy Pull
Rocky
Climb
ing ac
cess
ories
Just right! A solid chalkbag with a large, easy-close opening. The Vertical has a brush holder as well as a zipped pocket for car keys, money and other small valuables. On the removable belt there is a whistle, and the high quality fleece inside keeps your chalk dry.Height 17 cmWeight 110 gArt. 950005
A safety set consisting of our HMS Pro karabiner with screwgate and the Stubai BC. This combination assures dynamic belay and can also be used for abseiling.Weight 150 gArt. S9000SET61
Classic belay with excellent braking ability, especially when used with a double or twin rope. Great for abseiling as it keeps the two rope strands apart.Weight 55 gArt. 988130
This large figure of eight is great for smooth descents and dynamic belay. The Standard is made from anodized forged aluminium.Strength 30 kNWeight 109 gArt. 988125
Our multi-purpose mini-karabiner. Ideal for fixing your hammer or as a key ring. CAUTION: Do not use for climbing! Strength 1,5 kNWeight 8 gArt. 977911
The Easy Pull is a handy little twistable roller for reducing friction when using pulleys or for hauling. Perfect for ropes up to 11 mm diameter.CAUTION: Not for use for lifting people, and only for use as a secondary roller!Strength 12 kNWeight 40 gArt. 988501
A well-balanced hammer for knocking-in pitons or bolt hangers with the aid of a drill. It has a rubber handle and a hanging hole.Length 30 cmWeight 590 gArt. 916401
11
Rock Pitons have many uses, but are especially useful for unforseeable situations such as retreats or accidents. STUBAI has been hand-forging these tools for many years. In accordance with EN 569, we have differentiated between safety pitons (S) and pitons for progressing (F).
Piton
s
1
9
10
11
12
13
2
3
4
5
6
7
8
1 Profile piton High load resistant, slightly wedge-shaped
piton for use as a leader, CrMoV-steel. Useful length 70 (F), 100 (S) and 115 (S) mm Weight 55, 105 and 110 g, Art. 93001.
2 Bong This is similar to the profile piton, but the two
holes at the front can also be used to reduce the moment of force.
Useful length max. 120 (S) mm Weight 165 g, Art. 931015
3 Diagonal Piton Head turned to 45 degrees, CrMoV-steel. Useful length 70 (F), 100 (S) and 130 (S) mm Weight 70, 95 and 125 g, Art. 93701.
4 French Form Piton Head turned to 90 degrees. High load resistance, CrMoV-steel. Useful length 35 (F), 55 (F) and 75 (F) mm Weight 55, 90 and 110 g, Art. 9380..
5 Flat Blade Piton For narrow cracks – also in frozen rock. Useful length 20 (F) mm Weight 35 g, Art. 939255
6 Cliffhanger 3-point For cracks and edges, but tape your sling to the rock to prevent
it being levered out as you progress upwards. Length 75 mm Weight 35 g, Art. 940008
7 Cliffhanger round To be used similar to the cliffhanger 3-point. Length 100 mm Weight 35 g, Art. 940210
8 Soft Metal Piton To fit small cracks exactly, with head turned 90 degrees. Useful length 50 (F), 70 (F) and 90 (F) mm Weight 80, 90 and 110 g, Art. 9440..
9 Ring Piton Diagonal Head at 45 degrees, with loose ring for use in abseiling.
Useful length 95 (F) and 125 (F) mm Weight 135 and 165 g, Art. 95701.
10 V-Ring Piton The V-shape makes this piton widen as it is forced into a crack.
The ring is ideal for abseiling. Useful length 140 (F) mm Weight 130 g, Art. 958016
11 Bolt Hanger Standard Made of stainless steel, EN 959 tested. Weight 38 g Art. 930510 Diam. 10 mm Art. 930511 Diam. 12 mm
12 Bolt Hanger Protect Similar to Bolt Hanger Standard, but avoids damage to the
karabiners due to the rounded flange of the hole. Weight 40 g Art. 930610 Diam. 10 mm Art. 930611 Diam. 12 mm
13 Anchor UPAT Expansion anchor and nut made of stainless steel. Weight 50 g (10 mm) and 75 g (12 mm) Art. 930311 Diam. 10 mm Art. 930301 Diam. 12 mm
12Light
Twin Peaks
Light
Whether a 4-point standard or a 13-point crampon for extreme situations, our models have been expressly crafted to suit all your needs. Our wide range is carefully manufactured and only from the best material, naturally. Our new ergonomic heel lever is our latest response to the demands of the modern crampon-compatible boots.
ProfessionalWeight 630 gArt. 922109 with steel front bale and heel lever
CombiWeight 630 gArt. 922107 with front cradle and heel lever
UniversalWeight 580 gArt. 922105 with cradle binding
ClassicWeight 540 gArt. 922103 with strap binding
Short-point steel crampon. The flexible bar and missing front points mean greater flexibility. Also ideal for activity off the snow, like mountain running or walking on frozen-solid ground. Foresters, hunters and workmen all love our Twin Peaks too.
ClassicWeight 670 gArt. 922610 with strap binding
UniversalWeight 710 gArt. 922620 with cradle binding
Cram
pons
An extra-light, strong, tempered aluminium crampon with flexible bar and four available binding systems. Through modern technology, we have been able to combine minimal weight with maximum strength. Ideal for ski touring, winter climbing and for easier mountaineering tours. With its light weight and economy of space, the Light is at home in any rucksack.
13Trekking
Trekking Antislip
Classic 10-point, tempered steel crampon, with flexible bar, available with four different binding systems, for trekking or easy mountaineering. Very compact!
A small and extremely light crampon, for gaining grip in hard or slippery conditions. Ideal for spring tours when crossing tricky old snow patches.
4-pointWeight 280 gArt. 926510
6-pointWeight 410 gArt. 926520
CombiWeight 880 gArt. 921907 with front cradle and heel lever
UniversalWeight 820 gArt. 921905 with cradle binding
ClassicWeight 790 gArt. 921903 with strap binding
ProfessionalWeight 880 gArt. 921909 with steel front bale and heel lever
14
Tirol
Tirol
12-point tempered spring steel mountaineering crampon with flexible bar, available with three different bindings. Crooked side points for safe traversing and horizontal front points to reduce the danger of slipping – especially useful on corned snow (firn).
ProfessionalWeight 1010 gArt. 921105 with steel front bale and heel lever
Combi Weight 1010 gArt. 921103 with front cradle and heel lever
UniversalWeight 950 gArt. 921101 with cradle binding
Cram
pons
Acce
ssor
ies
Our models with flexible bar as standard, fit sizes 38-44. For smaller or larger sizes (30-38, 44 -51) we can provide a bar on request – at no extra cost!CAUTION: The size of boot soles is not standardized, so we strongly recommend you fit your crampons before you buy.
Anti Balling PlatePrevents a potentially dangerous build-up of snow and ice underneath the crampon between the points. Hard-wearing and cold-resistant. Art. 927010 for Twin PeaksArt. 927013 for Light and TrekkingArt. 927015 for Tirol
Flex BarsBy changing the bar, your crampons can be adjusted to fit extra-small or extra-large boots (look Infobox).Art. 92177. for Light and X-Change LightArt. 92178. for TirolArt. 92179. for Trekking, Twin Peaks and X-Change Flex
Point GuardsRubber stoppers for crampon points to prevent damage to your rucksack and its contents.Art. 927001
15
X-C
ha
ng
e
X-Change
Spider
Tirol
Introducing the new STUBAI X-Change – our complete all-rounder! Whether you want one or two frontpoints, a flexible or rigid bar, a lightweight or solid crampon for competition or for fun – the X-Change system can do it all! With just a few turns, the heel- and frontpoints can be changed. For all-terrain mountaineers, this complex system replaces the need for several pairs of specialized crampons, thereby saving both weight and space in your bag.
Specialist crampon for ice climbers. The stiff bar and long frontpoints make this great value model an excellent choice for climbing with rigorous precision. Extra point at the heel for safer descents.Sizes 35-48Weight 990 gArt. 921311
X-Change ProWith a rigid and crooked bar to fit your boot exactly. The front section can be tilted, and the included spur can be fixed onto the heel.Sizes 36-48Weight 1250 gArt. 921401
X-Change FlexSame front as the X-Change Pro, but with the bar and heel of the model TIROL. The advantages of this model are greater comfort, more space in your bag and quick size adjustment – which makes it more versatile. The model is favoured by hire shops and ice-tower climbers alike. Weight 1110 gArt. 921403
X-Change LightWith the lighter back section taken from our aluminium model LIGHT. Top performance combined with extreme light weight.Weight 930 gArt. 921405
X-Change CompetitionWhen every gram counts. No bar and no binding. Front and heel pieces for attachment directly to a rigid-soled boot. TOP TIP: Ice skating boots are cheap, warm and also very light!Weight 470 gArt. 921407
16
Sierra Blue Star Ibex
Ice ax
es
An aristocrat amongst ice axes. A classic mountain guide’s axe with a massive forged and polished steel head. The Sierra meets the highest test standards.Length 50, 55, 60, 65, 70, 77 and 85 cmWeight 710-860 gArt. 9070.. with gripper, with wrist loop
An excellent mountaineering all-rounder. Brilliant balance between the shaft and the forged steel head.Length 55, 60, 65, 70, 77 and 85 cmWeight 640-790 g (Art. 9041..) Weight 590-740 g (Art. 9040..)Art. 9041.. with gripper, with wrist loopArt. 9040.. without gripper, without wrist loop
A lightweight glacier axe, with technically designed steel head.Length 50, 55, 60, 65, 70, 77 and 85 cmWeight 590-750 gArt. 9012.. with gripper, with wrist loop
17
Pro
Sta
r
Tour Lite Telescope Tour Lite Tour Ultralite
Pro Star
A trekking axe with aluminium head. Delivered with snow basket. It´s telescopic shaft can be adjusted according to individual requirements from 60 to 95 cm.Weight 540 gArt. 900799 with gripper, with wrist loop
A touring axe with aluminium head, which despite its light weight, far exceeds European Standards for strength. With its strong shaft it can also be used as a ‘dead man anchor’.Length 55, 60, 65, 70, 77 and 85 cmWeight 420-570 gArt. 9007.. with gripper, with wrist loop
A top quality aluminium construction makes this the lightest in our range! An ideal partner for difficult passages over hard corn snow (firn) on ski tours. Length 55, 65 and 75 cmWeight 340-440 g (Art. 9001..) Weight 320-420 g (Art. 9002..)Art. 9001.. without gripper, with wrist loopArt. 9002.. without gripper, without wrist loop
A modern-style axe for the professional. The gently crooked shaft is for precise application on steep slopes, but still allows use as an anchor point in snow. Both shaft and toothed pick are made to the highest possible standards.Length 55, 60, 65 and 70 cmWeight 640-690 g (Art. 9022..)Weight 580-650 g (Art. 9023..)Art. 9022.. with gripper, with wrist loopArt. 9023.. without gripper, with wrist loop
We have the right ice axe for every type of tour. STUBAI has developed a perfectly balanced range for the many facets of mountaineering. All models are of course CE-approved and manufactured to the usual top STUBAI standards.
18
Scorpion
Hornet
Scorpion
Hornet Protect
Hornet
Scorpion Basic
Our answer to the challenge of frozen waterfalls. The Scorpion excels with its fantastic balance and specially adapted shaft. The robust pick reduces ice splintering and is easy to place. The head is interchangeable with pick, hammer and flat adze. Also equipped with a finger guard and an ergonomical and easily detachable wrist loop.Weight 760 g (without wrist loop)Length 48 cmArt. 914610 with hammer headArt. 914611 with flat adze
The extreme choice for steep ice faces and mountaineering. Uncompromising craftsmanship makes this an invaluable friend on the darkest north faces and on the world’s highest mountains.Weight 710 g (with wrist loop)Length 48 cm Art. 914670 with hammer headArt. 914675 with flat adze
The Hornet Protect is a great value ice tool for those new to the sport. With a gently curving shaft, a finger guard and a detachable wrist loop, this tool just loves steep ice – whether it’s an ice tower or a frozen waterfall.Weight 705 g (with wrist loop)Length 46 cmArt. 914740 with flat adzeArt. 914750 with hammer head
Great value tool for use in extreme mountain and ice environments. The Hornet‘s attributes: simple, reliable and light weight – a great tool for beginners to develop their skills.Weight 630 g (with wrist loop)Length 46 cm Art. 914710 with flat adzeArt. 914720 with hammer head
Ice to
ols
19
Sig
ma
Sigma II
Sigma II Plus
Sigma X-Press
STUBAI ice screws are famous for their excellent bite, their speed of placement, and their special finish, which makes it easier to remove the core.
All Purpose Bag A tough little bag with straps to fix to your rucksack. Ideal for carrying your crampons, ice screws, pitons, etc.Art. 919008
Ice Axe Head CoverArt. 919006
Point Guard Art. 919010 Ac
cess
ories
Ice sc
rews
An ice screw with very strong steel shaft and hardened 4-toothed drill bit. Hardened steel handle. Length 120, 170 and 220 mmWeight 135, 155 and 175 gArt. 96391.
As the Sigma II, but with a built-in crank for even quicker application.Length 120, 170 and 220 mmWeight 165, 185 and 205 gArt. 96392.
A short ice screw with steel handle for tackling thinner ice sheets. CAUTION: Does not conform to EN, is not CE–tested!Length 80 mmWeight 75 g Art. 963931
Although sharp points and teeth are essential at the ice-face, they can also represent an obvious and unnecessary hazard elsewhere. Our accessories can help make your sharp points safer.
20
Tecblade
Rescue Tour Mini Compact
Tecblade
STUBAI tour products are an indispensable part of your gear on any tour. Our shovels are made exclusively from highest quality aluminium and deliver in even the most difficult circumstances. We also offer a full range of avalanche probes and even the ingenious Tecbag rucksack for putting them in.
A professional avalanche shovel with large blade and holes specially for rescue techniques. D-shaped pro-grip for ease of use.Weight 845 gSize of blade 25 x 28 cmWorking length 100 cmArt. 996415
Classic avalanche shovel. Its comfortable working length and large blade have made it many friends amongst those who dig a lot. Great for checking the snow profile, digging a bivouac or building a kicker – and naturally also in an emergency. Weight 740 gSize of blade 25 x 28 cmWorking length 90 cmArt. 996403
Despite its smaller dimensions the Mini still shifts a lot of snow thanks to its high-sided blade. T-gripped and telescopic, it is designed to take up a minimum of space in your rucksack.Weight 650 gSize of blade 24 x 24 cmWorking length 76 cmArt. 996401
Very compact avalanche shovel, which can be speedily adjusted to three different positions: either folded, as a hack, or as a shovel. Its reliability and small size make it especially popular on expeditions. Weight 610 gSize of blade 20 x 23 cmWorking length 60 cmArt. 996201
Tour
prod
ucts
A hardened aluminium shovel with T-handle and 2-stage telescopic shaft. The shaft seat is integrated in the blade to help reduce space. The oval profile of the shaft increases both its strength and its performance. The flat blade and footplate on the shovel head make digging less exhausting. Holes specially cut for rescue techniques.Weight 730 gSize of blade 22,50 x 26 cmWorking length 92 cmArt. 996303
Voted ‘Best shovel in the Test’ by the reviewers of Germany’s leading mountain magazine ‘Alpin’!
21
Free Heels
Carbon Rapid
Alu Rapid
Niro Rescue
Tecbag
Simple universal binding system for use with any type of boot. Ideal for use on cross-country skis.Weight 720 g/pairArt. 927500
Extremely light avalanche probe with depth markings. Uses a simple pull-cord system for assembly which saves valuable time when you need it most. The mainly carbon structure in combination with aluminium means high stability and amazingly light weight. Ideal when every gram counts. Bag included.Weight 165 gLength 265 cmArt. 911415
The Classic - a good value probe with depth markings, made from aluminium alloy. Same ease of use as the CARBON RAPID. Bag included.Weight 215 gLength 265 cmArt. 911425
An avalanche probe for professional rescue teams made from durable stainless steel. With quick-release assembly system the probe can quickly be lengthened to 250 cm. For use in deeper snow three 50 cm extensions are included.The rescue team can extend this probe upon choice. Weight 990 gLength 400 cm (250 cm + 3 extensions included)Art. 911455
We believe we have thought of everything in the design of this all-round mountain rucksack. To list just the most important features:- Long zippers for easy handling- Attachments for snowboard, snow shoes,
skis and ice axes- Drink-bag compatible- Built-in rain cover- Waterproof YKK zips- Removable net pocket (for helmet,
damp clothing, etc.)- Inner compartment for avalanche
shovel and probe- Anti-sweat system for the back area,
with air channel and mesh pads. Weight 1400 gVolume 25 LiterHeight 50 cm, width 30 cm, depth 20 cmArt. 950000
22
Super 5000
Stee
l kar
abine
rs
1
2
No. Model Material Strength closed gate
Strength minor axis
Strength open gate
Gate opening
Weight Dimension According to Art.
1 SUPER 5000 with screw gate forged steel, galvanized 50 kN 10 kN 35 kN 16 mm 245 g 116 x 60 mm EN 362, EN 12275, UIAA 121 978001
2 ASYM. OVAL with screw gate steel, galvanized 30 kN 10 kN 9 kN 21 mm 240 g 120 x 63 mm EN 362, EN 12275, UIAA 121 982002
3 OVAL with screw gate steel, galvanized 25 kN 10 kN 8 kN 21 mm 240 g 122 x 63 mm EN 362, EN 12275, UIAA 121 982003
4 OVAL 40 kN with screw gate steel, galvanized 40 kN 20 kN 15 kN 28 mm 305 g 130 x 75 mm EN 362, EN 12275, UIAA 121 982501
5 ASYM. D-FORM with screw gate, silver steel, galvanized 34 kN 10 kN 10 kN 27 mm 228 g 110 x 74 mm EN 362, EN 12275, UIAA 121 985001
5 ASYM. D-FORM with screw gate, black steel, galvanized 34 kN 10 kN 10 kN 27 mm 228 g 110 x 74 mm EN 362, EN 12275, UIAA 121 985041
6 HMS with screw gate steel, galvanized 25 kN 10 kN 8 kN 24 mm 223 g 109 x 70 mm EN 362, EN 12275, UIAA 121 987701
7 HMS symmetrical, with screw gate steel, galvanized 20 kN 27 mm 232 g 115 x 75 mm EN 362 987721
8 FIREMANS KARABINER with safety pin forged steel, galvanized 20 kN 28 mm 368 g 140 x 85 mm EN 362 488501
9 FIREMANS KARABINER with belt ring forged steel, galvanized 15 kN 51 mm 925 g 210 x 108 mm ÖN F4031 488601
4 5 6 73
STUBAI is one of the world’s leading steel karabiner manufacturers. We are proud that every day people all over the world put their trust in the quality of our products. Our precision manufacturing process and strict quality controls are all geared to your safety.
23
Minifly Pro
Click Fix
Skys
ports
Tempered aluminium karabiner with screw gate.CAUTION: Do not use for climbing!Strength 8 kNWeight 10 gArt. 970321
8 9
Tempered aluminium buckle with black anodized finish. For belts up to 45 mm width.Weight 98 g (adjustable) and 70 g (non-adjustable)
Art. 971603 with steel adjustment plate
Art. 971503 non-adjustable
No. Model Material Strength closed gate
Strength minor axis
Strength open gate
Gate opening
Weight Dimension According to Art.
1 SUPER 5000 with screw gate forged steel, galvanized 50 kN 10 kN 35 kN 16 mm 245 g 116 x 60 mm EN 362, EN 12275, UIAA 121 978001
2 ASYM. OVAL with screw gate steel, galvanized 30 kN 10 kN 9 kN 21 mm 240 g 120 x 63 mm EN 362, EN 12275, UIAA 121 982002
3 OVAL with screw gate steel, galvanized 25 kN 10 kN 8 kN 21 mm 240 g 122 x 63 mm EN 362, EN 12275, UIAA 121 982003
4 OVAL 40 kN with screw gate steel, galvanized 40 kN 20 kN 15 kN 28 mm 305 g 130 x 75 mm EN 362, EN 12275, UIAA 121 982501
5 ASYM. D-FORM with screw gate, silver steel, galvanized 34 kN 10 kN 10 kN 27 mm 228 g 110 x 74 mm EN 362, EN 12275, UIAA 121 985001
5 ASYM. D-FORM with screw gate, black steel, galvanized 34 kN 10 kN 10 kN 27 mm 228 g 110 x 74 mm EN 362, EN 12275, UIAA 121 985041
6 HMS with screw gate steel, galvanized 25 kN 10 kN 8 kN 24 mm 223 g 109 x 70 mm EN 362, EN 12275, UIAA 121 987701
7 HMS symmetrical, with screw gate steel, galvanized 20 kN 27 mm 232 g 115 x 75 mm EN 362 987721
8 FIREMANS KARABINER with safety pin forged steel, galvanized 20 kN 28 mm 368 g 140 x 85 mm EN 362 488501
9 FIREMANS KARABINER with belt ring forged steel, galvanized 15 kN 51 mm 925 g 210 x 108 mm ÖN F4031 488601
Stubai Werkzeugindustrie reg.Gen.m.b.H. 6166 Fulpmes | Austria | Dr. Kofler Straße 1 T +43 (0)5225 6960-0 | F +43 (0)5225 6960-12 [email protected]
Concept & Consultants: Helmut Knoflach, Matthias Knaus, Edward Ward, Hansjörg Fink, Manfred Flür, Raimund Huter, Heinz Zak, Werner Niederkircher
Graphic & Design: Werner Niederkircher www.nuovoline.at
Coverphoto: Stefan Mayr Photo: Heinz Zak, Matthias Knaus, Alex Nuding, Werner Niederkircher
Technical specifications may change without notice. Printing errors exceptet.
© 2007 Stubai Werkzeugindustrie
www.stubai-bergsport.comwww.stubai-bergsport.com