3
About the Siemens-CoE: CoE has established relevant laboratories having Siemens products and Siemens Industry software applications. The equipments which have been provided by Siemens are of state-of-the-art level. The laboratories which have been established at Government Engineering, Bhavnagar under CoE, are - Product Design and Validation Lab, Advanced Manufacturing Lab, Automation Lab, Electrical Lab, Mechatronics Lab, Process Control & Instrumentation Lab, CNC Programming Lab, Rapid Prototyping Lab and CIM Simulation Lab. Objective of the Course: This course has been designed to enrich participants with knowledge of Automation and system overview, TIA software, hands on practices on PLC-SCADA and analog signal processing as well as application based programming. For Whom: Faculties from engineering and polytechnic institutes, professionals, research scholars, PG scholars and B.E. final and Pre final year students of EC, Mechanical, Electrical, Instrumentation, Production engineering having zeal to learn Mechatronics engineering are invited to participate and enrich their knowledge. Registration Fee: No registration fees will be charged from participants. Important Date: Last date for registration : 06/06/2016 Confirmation for participation: 17/06/2016 Address for Correspondence Prof. K. M. Vagadia Asst. Professor., EC .Dept., Government Engineering College, Bhavnagar M:07567112287, [email protected] Prof. B. K. Jambucha Asst. Professor., EC Dept., Government Engineering College, Bhavnagar M:09662003824, [email protected] TEQIP – II SPONSERED TWO WEEK SHORT TERM TRAINING PROGRAMME On Recent Trends in Automationat Siemens – Centre of Excellence, GEC Bhavnagar 6 th - 17 th June, 2016 Coordinators Convener Patron Prof. K. M. Vagadia Prof. B. K. Jambucha Prof. A. K. Sarvaiya Dr. J. M. Patel

STTP Brochure Automation

Embed Size (px)

Citation preview

Page 1: STTP Brochure Automation

About the Siemens-CoE:CoE has established relevant laboratories having Siemens products and Siemens Industry software applications. The equipments which have been provided by Siemens are of state-of-the-art level. The laboratories which have been established at Government Engineering, Bhavnagar under CoE, are - Product Design and Validation Lab, Advanced Manufacturing Lab, Automation Lab, Electrical Lab, Mechatronics Lab, Process Control & Instrumentation Lab, CNC Programming Lab, Rapid Prototyping Lab and CIM Simulation Lab.

Objective of the Course:This course has been designed to enrich participants with knowledge of Automation and system overview, TIA software, hands on practices on PLC-SCADA and analog signal processing as well as application based programming.

For Whom: Faculties from engineering and polytechnic institutes, professionals, research scholars, PG scholars and B.E. final and Pre final year students of EC, Mechanical, Electrical, Instrumentation, Production engineering having zeal to learn Mechatronics engineering are invited to participate and enrich their knowledge.

Registration Fee: No registration fees will be charged from participants.

Important Date:

Last date for registration : 06/06/2016Confirmation for participation: 17/06/2016

Address for CorrespondenceProf. K. M. VagadiaAsst. Professor., EC .Dept.,Government Engineering College, BhavnagarM:07567112287, [email protected]

Prof. B. K. JambuchaAsst. Professor., EC Dept.,Government Engineering College, BhavnagarM:09662003824, [email protected]

TEQIP – II SPONSERED

TWO WEEK SHORT TERM TRAINING PROGRAMME

On“Recent Trends in Automation”

at Siemens – Centre of Excellence, GEC Bhavnagar6th - 17th June, 2016

Coordinators Convener Patron

Prof. K. M. VagadiaProf. B. K. Jambucha

Prof. A. K. Sarvaiya Dr. J. M. Patel

Organised by:Electronics and Communication Department,

Government Engineering College, Near BPTI, Vidyanagar,

Bhavnagar – 364001Website: www.gecbhav.ac.in

Phone No.- 0278 2525354

About The Institute

Page 2: STTP Brochure Automation

Government Engineering College (GEC), Bhavnagar is a State Governed institution recognized by All India Council of Technical Education (AICTE), New Delhi and affiliated to Gujarat Technological University (GTU), Ahmedabad. The institute offers undergraduate programs in engineering disciplines of Mechanical, E.C. Production, Computer, I.T. and Civil. The institute is located just 1.5 KM away from the State transport Depot and 2.5 KM away from Bhavnagar Railway Station. The institute is having huge newly constructed buildings with all modern amenities. The library is having more than 14000 books collection for all subjects. The institute campus is Wi-Fi enabled and powered by 100 mpbs NKN high speed internet connectivity. The campus blends beautifully with the green landscaping, aesthetic elegance of sculpture and vibrant pursuit of knowledge by enthusiastic and well qualified young and experienced faculties.

The institute is selected by MHRD, New Delhi for Technical Education Quality Improvement Program (TEQIP-II) funded by World bank. Various activities related to laboratory infrastructure and faculty development, are being carried out for the holistic development of the institute.

About E. C. Engineering Department

Electronics and Communication engineering department was established in the year of 2008 with aims to provide industry oriented need based quality technical education. Highly qualified and experienced faculties are the real strength of this department. Besides this, department has domain specific equipped laboratories, workshop and a modern computer centre with latest computer systems powered with internet connectivity with 100 MBPS lease line.

Registration form forShort term training programme on

“Recent Trends in Automation”at Siemens – Centre of Excellence, GEC Bhavnagar

6th - 17th June, 2016

1. Name of the Participant :

2. Designation :

3. Name of the Department :

4. Name of the Institute :

5. Academic

Qualification :

6. Specialization :

7. Total Teaching Experience :

8. Age (Years) :

9. Residential address :

Mobile :

E-mail :

10. Office address :

Phone :

E-mail :

11. Subjects taught :

Date

Signature of Applicant

SPONSORSHIP CERTIFICATEThe applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her.

Date : Signature with Seal

(Principal / Director)

Page 3: STTP Brochure Automation