Strut Channel - Steel - Frost Electric and...E STRUT & ACCESSORIES Strut Channel - Steel "A" Deep Channel 12-Gauge, 1-5/8" x 1-5/8" Thomas & Betts PartNumber Length Finish Description

E

STRUT & ACCESSORIESStrut Channel - Steel

"A" Deep Channel12-Gauge, 1-5/8" x 1-5/8"

Thomas & BettsPartNumber Length Finish DescriptionA1200-HS-10-GR 10’ Green Half slotA1200-HS-10-PGAL 10’ Galvanized Half slotA1200-HS-20-GR 20’ Green Half slotA1200-HS-20-PG 20’ Galvanized Half slot

12-Gauge Back-to-Back

UnistrutPartNumber Length Dimensions Finish DescriptionP1001-GRN-10 10’ 3 1/4" x 1 5/8" Painted Green SolidP1001-10PG 10’ 3 1/4" x 1 5/8" Pre-Galvanized, Zinc finish Solid

"B" Shallow Channel14-Gauge, 1-5/8" x 13/16"

Thomas & BettsPartNumber Length Finish DescriptionB1400-HS-10-GR 10’ Green Half slotB1400-HS10-PG 10’ Galvanized Half slot

FrostFrost

Website: www.frostelectric.com Email: [email protected]

E

STRUT & ACCESSORIESStrut Channel - PVC Coated Steel

"A" Deep Channel12-Gauge, 1-5/8" x 1-5/8"

OcalPartNumber Length Finish DescriptionA12-P-G 10’ Gray PVC Coated Standard Punched

Strut Channel - Aluminum"A" Deep Channel

12-Gauge, 1-5/8" x 1-5/8"

Thomas & BettsPartNumber Length Finish DescriptionA1200-10-AL 10’ Aluminum Solid

"B" Shallow Channel12-Gauge, 1-5/8" x 13/16"

Thomas & BettsPartNumber Length Finish DescriptionB1200-10-AL 10’ Aluminum Solid

FrostFrost


E

STRUT & ACCESSORIESStrut Channel Fittings

Strut NutsCaddy Slick

CaddyPartNumber Torque Thread Size DescriptionSLICK250 5 Ft-Lb. (Recommended) 1/4-20 Quick support for threaded rod, pipe hangers/clamps, electrical boxSLICK375 15 Ft-Lb. (Recommended) 3/8-16 Quick support for threaded rod, pipe hangers/clamps, electrical box

Spring Nuts

UnistrutPartNumber Thread Size Description Buy PkgP1006-1420EG 1/4-20 Long spring-nut for deep strut 100P1008EG 3/8-16 Long spring-nut for deep strut 100P7006-1420 1/4-20 Short spring-nut for mini strut, shallow 100

Thomas & BettsPartNumber Size Description Buy PkgA-100-1/4 1/4" Spring nut used on "A" deep channel 100A-100-3/8 3/8" Spring nut used on "A" deep channel 100A-100-1/2 1/2" Spring nut used on "A" deep channel 100B100-1/4 1/4" Spring nut used on "B" shallow channel 100B100-3/8 3/8" Spring nut used on "B" shallow channel 100

FrostFrost


E


Nylon Cone NutTwirl Nut

Thomas & BettsPartNumber Size Description Buy PkgCM100-1/4 1/4" Cone nut, steel gold galv base, nylon cone, for shallow or deep channel 100CM100-3/8 3/8" Cone nut, steel gold galv base, nylon cone, for shallow or deep channel 100CM100-1/2 1/2" Cone nut, steel gold galv base, nylon cone, for shallow/deep channel 100

Square Washer

Thomas & BettsPartNumber Size Description Buy PkgAB241-1/4 1/4" Square washer w/ gold galvanized finish 100AB241-3/8 3/8" Square washer w/ gold galvanized finish 100AB241-1/2 1/2" Square washer w/ gold galvanized finish 100

End Cap - SteelDeep Channel

Thomas & BettsPartNumber Description Use Buy PkgA804 End cap, steel gold galvanized finish A Series 1-5/8" deep

channel 25

FrostFrost


E


End Cap - PlasticDeep Channel

UnistrutPartNumber Description Use Buy PkgP2860-10 White, plastic channel safety end cap P1000, P1100, P2000

channels and P9000telestrut

50

Channel JoinerDeep Channel

Thomas & BettsPartNumber Holes Description Buy PkgA-208 4-Hole U shape steel channel joiner, "A" series strut only (1-5/8" deep) 10

Channel Connecting PlatesFlat Plate

Thomas & BettsPartNumber Holes Description Buy PkgAB206-EG 2-Hole Flat splice plate, steel w/ silver galvanized finish 50AB207-EG 3-Hole Flat splice plate, steel w/ silver galvanized finish 50X207 4-Hole Flat splice plate, steel w/ gold galvanized finish 25AB220-EG 4-Hole Tee plate, steel w/ silver galvanized finish 25

FrostFrost


E


Channel Connecting PlatesAngle Plate

Thomas & BettsPartNumber Holes Description Buy PkgAB202-EG 2-Hole Channel plate, 90 degree angle 50AB203-EG 3-Hole Channel corner plate, 90 degree angle 25AB205-EG 4-Hole Channel angle plate, 90 degree 25AB219-EG 3-Hole Flat angle plate, 90 degree 25AB225 2-Hole Acute 45 degree, closed angle, channel plate 25AB227 2-Hole Obtuse 45 degree, open angle, channel plate 50

Post Base

Thomas & BettsPartNumber Holes Description Buy PkgAP232 10-Hole Post base, (4-hole base, 6-hole post) 10

FrostFrost


E


Cobra Pipe/Cable ClampOne-Piece

Thomas & BettsPartNumber Size Cable O.D. Buy PkgCPC050 1/2" .650" - .890" 100CPC075 3/4" .860" - 1.110" 100CPC100 1" 1.110" - 1.400" 100CPC125 1 1/4" 1.400" - 1.725" 100CPC150 1 1/2" 1.690" - 1.980" 50CPC200 2" 1.980" - 2.576" 50CPC250 2 1/2" 2.576" - 3.060" 25CPC300 3" 3.060" - 3.626" 25CPC350 3 1/2" 3.626" - 4.126" 25CPC400 4" 4.126" - 4.626" 25

PVC Coated Pipe Straps

OcalPartNumber Size Color Buy PkgSS3/4-G 3/4" Gray 1SS1-G 1" Gray 1SS114-G 1 1/4" Gray 1SS2-G 2" Gray 1

FrostFrost


E

CONDUIT CLAMPS FOR STRUT, BEAMS, & RODPipe Supports

Electro-GalvanizedThin Wall Conduit (EMT) Clamps

T&BPartNumber Size O.D. Steel Strap Thickness Design Load Lbs Buy Pkg700-1/2-EG 1/2" 0.706 14 ga 750 100700-3/4-EG 3/4" 0.922 14 ga 750 100700-1-EG 1" 1.163 14 ga 750 100700-1-1/4-EG 1 1/4" 1.51 14 ga 750 50700-1-1/2-EG 1 1/2" 1.74 12 ga 800 50700-2-EG 2" 2.197 12 ga 800 50

Rigid HW Conduit & IMC Pipe Clamps

T&BPartNumber Size O.D. Steel Strap Thickness Design Load Lbs Buy Pkg702-1/2-EG 1/2" .840 14 ga 750 100702-3/4-EG 3/4" 1.05 14 ga 750 100702-1-EG 1" 1.315 14 ga 750 100702-1-1/4-EG 1 1/4" 1.660 14 ga 800 50702-1-1/2-HW 1 1/2" 1.900 12 ga 800 50702-2-EG 2" 2.375 12 ga 800 50702-2-1/2-EG 2-1/2" 2.875 12 ga 1000 50702-3-EG 3" 3.500 12 ga 1650 50702-3-1/2-EG 3-1/2" 4.000 11 ga 1650 25702-4-EG 4" 4.500 11 ga 1650 25702-5-EG 5" 5.563 11 ga 1650 25

FrostFrost


E

CONDUIT CLAMPS FOR STRUT, BEAMS, & RODPipe Supports

Electro-GalvanizedHW/EMT Conduit Universal Pipe Clamps

T&BPartNumber Size O.D. Steel Strap Thickness Design Load Lbs Buy Pkg703-3/4-EG 3/4" 0.932 - 1.050 14 ga. 550 100703-1-EG 1" 1.163 - 1.315 14 ga. 550 100703-1-1/4-EG 1 1/4" 1.508 - 1.660 14 ga. 800 50703-1-1/2-EG 1 1/2" 1.738 - 1.900 14 ga. 800 50703-2-EG 2" 2.195 - 2.375 14 ga. 800 50

Rooftop

CaddyPartNumber Size Load Rating Buy PkgPPRPS25H6 5-5/8" 25 lbs 1RPS50H4EG 4" 50 lbs 1

FrostFrost


E

CONDUIT CLAMPS FOR STRUT, BEAMS, & RODOne Piece Strut Clamps

Break-Apart

CaddyPartNumber Size Buy PkgSK125I 3/4" EMT/HW 100SK85I 1/2" EMT/HW 100SK165I 1" EMT/HW 100SK205I 1-1/4" EMT/HW 50SK245I 1-1/2" EMT/HW 50SK325I 2" EMT/HW 50SK405I 2-1/2" EMT/HW 50SK485I 3" EMT/HW 50SK565I 3-1/2" EMT/HW 25SK645I 4" EMT/HW 25

SCH ClipsOne-Piece Strut Clamps

CaddyPartNumber Size Cable O.D. Buy PkgSCH-8 1/2" EMT 100SCH-12 3/4" EMT - 1/2" HW 100SCH-6B 3/8" MC/AC .10" - .63" 100SCH-8B 1/2" .34" - .71" 100SCH-12B 3/4" EMT - 1/2" HW .57" - .92" 100SCH-16B 1" EMT - 3/4" HW .72" - 1.16" 100SCH-24B 1 1/2" EMT - 1 1/4" HW 1.25" - 1.74" 50

FrostFrost


E

CONDUIT CLAMPS FOR STRUT, BEAMS, & RODConduit Hanger With Bolt

Thomas & BettsPartNumber Raco Pipe Size Load Rating Buy Pkg6-H0-B 2052 3/8"-1/2" 500 1006-H0-TB 3/8"-1/2" (threaded impression-no nut required) 500 1006-H1-B 2053 3/4" 500 1006-H2-B 2054 1" 500 1006-H2-1/2B 2041 1-1/4" EMT 500 1006-H3-B 2055 1-1/2" EMT - 1-1/4" HW 500 1006-H4-B 2056 1-1/2" HW Pipe 500 1006-H5-B 2058 2" 500 506-H6-B 2057 2-1/2" 500 506-H7-B 2059 3" 500 256-H8-B 2060 3-1/2" 500 256-H9-B 2061 4" 500 10

Captive Bolt / Built-in Nut

CaddyPartNumber Size Mounting Hole Size Buy PkgCD0B 1/2" EMT - 1/2" HW 1/4" Bolt 100CD1B 3/4" EMT - 3/4" HW 1/4" Bolt 100CD2B 1" EMT - 1" HW 1/4" Bolt 100CD2.5B 1-1/4" HW 1/4" Bolt 100CD3B 1-1/4" EMT - 1-1/2" HW 1/4" Bolt 100CD4B 1-1/2 EMT 5/16" Bolt 50CD5B 2" EMT - 2" HW 5/16" Bolt 50

FrostFrost


E


Right Angle ClampIron

Crouse HindsPartNumber Size Load Rating Description Buy PkgRAC50HD 1/2" 30 Lbs Right angle type clamp, electrogalvanized 50RAC75HD 3/4" 50 Lbs Right angle type clamp, electrogalvanized 50RAC100HD 1" 60 Lbs Right angle type clamp, electrogalvanized 50RAC125HD 1 1/4" 75 Lbs Right angle type clamp, electrogalvanized 25RAC150HD 1 1/2" 80 Lbs Right angle type clamp, electrogalvanized 25RAC200HD 2" 100 Lbs Right angle type clamp, electrogalvanized 25RAC300HD 3" 165 Lbs Right angle type clamp, electrogalvanized 10RAC400HD 4" 330 Lbs Right angle type clamp, electrogalvanized 10

Edge Type ClampIron

Crouse HindsPartNumber Size Description Buy PkgETC50HD 1/2" Edge type clamp, electrogalvanized 50ETC75HD 3/4" Edge type clamp, electrogalvanized 50ETC100HD 1" Edge type clamp, electrogalvanized 50ETC125HD 1 1/4" Edge type clamp, electrogalvanized 25ETC150HD 1 1/2" Edge type clamp, electrogalvanized 25ETC200HD 2" Edge type clamp, electrogalvanized 25

FrostFrost


E


Parallel Type ClampIron

Crouse HindsPartNumber Size Load Rating Description Buy PkgPARC50HD 1/2" 30 Lbs Parallel type clamp, electrogalvanized 50PARC75HD 3/4" 50 Lbs Parallel type clamp, electrogalvanized 50PARC100HD 1" 60 Lbs Parallel type clamp, electrogalvanized 50PARC125HD 1 1/4" 75 Lbs Parallel type clamp, electrogalvanized 25PARC150HD 1 1/2" 80 Lbs Parallel type clamp, electrogalvanized 25PARC200HD 2" 100 Lbs Parallel type clamp, electrogalvanized 25

Pipe HangersSeries 700 - "J"

Steel - Gold Galvanized Finish

SuperstrutPartNumber Pipe Size Rod Size Stock Size Bolt Size Load Buy PkgC711-3/4 3/4" 3/8" 12-ga. x 3/4" 1/4" 400 lbs Max Rec 50C711-1 1" 3/8" 12 ga. x 3/4" 1/4" 400 lbs Max Rec 50C711-2 2" 3/8" 12-ga. x 3/4" 1/4" 400 lbs Max Rec 50C711-2-1/2 2-1/2" 1/2" 12-ga. x 1 1/4" 3/8" 500 lbs Max Rec 25C711-3 3" 1/2" 12-ga. x 1 1/4" 3/8" 500 lbs Max Rec 25

FrostFrost


E

CONDUIT CLAMPS FOR STRUT, BEAMS, & RODQuick Latch Pipe Hangers

Non-Metallic

ArlingtonPartNumber Size Buy PkgNM2000 For 1/2" EMT, 3/8" LT, 3/8" Copper Pipe 100NM2005 For 1/2" HW, IMC, PVC, LT, Flex, ENT, Copper Pipe 100NM2010 For 3/4" EMT, Copper Tubing 100NM2015 For 3/4" HW, IMC, PVC, LT, Flex, ENT, Copper Pipe 100NM2025 For 1" HW, IMC, PVC, LT, Flex, ENT, Copper Pipe 100NM2040 For 1-1/4" HW, IMC, PVC, 1-1/2 EMT, Copper Tubing/Pipe 100NM2045 For 1-1/2" HW, IMC, PVC, LT, Flex, Copper Pipe 50NM2050 For 2" HW, IMC, PVC, EMT, LT, Flex, Copper Tubing 50

Threaded Rod & CouplingsSolid Rod

Plated

Thomas & BettsPartNumber Size Length Description Buy PkgR628 1/4" 6’ Piece R series galvanized threaded rod 300R638 3/8" 6’ Piece R series galvanized threaded rod 150R648 1/2" 6’ Piece R series galvanized threaded rod 60R1028 1/4" 10’ Piece R series galvanized threaded rod 500R1038 3/8" 10’ Piece R series galvanized threaded rod 250

FrostFrost


E

CONDUIT CLAMPS FOR STRUT, BEAMS, & RODThreaded Rod & Couplings

Rod Coupling

UnistrutPartNumber Size Description Buy PkgHRCN025 1/4" - 20 Steel coupler nuts (rod couplings) 50HRCN037 3/8" - 16 Steel coupler nuts (rod couplings) 50HRCN050 1/2" - 13 Steel coupler nuts (rod couplings) 50

CONDUIT MOUNTING DEVICESOne-Hole Pipe Clamps / Clamp Backs

For Heavywall ConduitMalleable Iron

Crouse HindsPartNumber Size Description Buy Pkg510 1/2" Rigid/IMC grade clamp 50511 3/4" Rigid/IMC grade clamp 50512 1" Rigid/IMC grade clamp 50513 1-1/4" Rigid/IMC grade clamp 25514 1-1/2" Rigid/IMC grade clamp 20515 2" Rigid/IMC grade clamp 10CB1 1/2" Rigid/IMC grade clamp backs/spacers 25CB2 3/4" Rigid/IMC grade clamp backs/spacers 25CB3 1" Rigid/IMC grade clamp backs/spacers 25CB4 1-1/4" Rigid/IMC grade clamp backs/spacers 25CB5 1-1/2" Rigid/IMC grade clamp backs/spacers 25CB6 2" Rigid/IMC grade clamp backs/spacers 10

FrostFrost


E

CONDUIT MOUNTING DEVICESOne-Hole Pipe Clamps / Clamp Backs

PVC Coated - GrayMalleable Iron

OcalPartNumber Size Description Buy Pkg1HMS11/4-G 1-1/4" Gray PVC coated pipe straps 11HMS11/2-G 1-1/2" Gray PVC coated pipe straps 11HMS2-G 2" Gray PVC coated pipe straps 1CB11/4-G 1 1/4" Gray PVC coated clamp backs/spacers (used w/ one-hole straps) 1CB11/2-G 1 1/2" Gray PVC coated clamp backs/spacers (used w/ one-hole straps) 1CB2-G 2" Gray PVC coated clamp backs/spacers (used w/ one-hole straps) 1

One-Hole Pipe StrapsZinc Plated Steel

MinerallacPartNumber Size Description Buy PkgMIN-E30 1/2" For EMT, standard duty, zinc plated 100MIN-E40 1/2" For rigid HW / flexible conduit, MIN-Esnap-on clip 100MED30 1/2" For EMT, hanging tubing, pipe, BX cable, medium duty snap strap 100MIN-E45 3/4" For EMT, standard duty, zinc plated 100MIN-E50 3/4" For rigid HW / flexible conduit, MIN-Esnap-on clip 100MED45 3/4" For EMT, hanging tubing, pipe, BX cable, medium duty snap strap 100MIN-E55 1" For EMT, standard duty, zinc plated 100MED60 1" For rigid HW / IMC, medium duty Jiffy clip, snap-on 100MED55 1" For EMT, hanging tubing, pipe, BX cable, medium duty snap strap 100MED70 1-1/4" For rigid HW / IMC, medium duty Jiffy clip, snap-on 100MED65 1-1/4" For EMT, hanging tubing, pipe, BX cable, medium duty snap strap 100MED80 1-1/2" For rigid HW / IMC, medium duty Jiffy clip, snap-on 50MED75 1-1/2" For EMT, hanging tubing, pipe, BX cable, medium duty snap strap 50MED90 2" For rigid HW / IMC, medium duty Jiffy clip, snap-on 50MED85 2" For EMT, hanging tubing, pipe, BX cable, medium duty snap strap 50

FrostFrost


E

CONDUIT MOUNTING DEVICESJiffy Clips - Heavy Duty

EMT & HeavywallOne-Hole

MinerallacPartNumber Size Description Buy PkgH92 2-1/2" EMT/HW Snap strap, steel, for hanging heavy conduit, coil, and cable 25H94 3" EMT/HW Snap strap, steel, for hanging heavy conduit, coil, and cable 10H95 3-1/2" EMT/HW Snap strap, steel, for hanging heavy conduit, coil, and cable 10H96 4" EMT/HW Snap strap, steel, for hanging heavy conduit, coil, and cable 10

Jiffy ClipsZinc Plated Steel

One-Hole

MinerallacPartNumber Size Description Buy Pkg105 1/4" Fits 1/4" tube 100115 3/8" Fits 3/8" tube 100125 3/8" Fits BX 14-2, 14-3, & 12-2 100130 1/2" Fits 1/2" EMT 100

FrostFrost


E

CONDUIT MOUNTING DEVICESSnap-On Clips

One HoleRigid / IMC

Crouse HindsPartNumber Size Description Buy Pkg200 1/2" Rigid or IMC clamps snap-on, steel 100201 3/4" Rigid or IMC clamps snap-on, steel 100202 1 Rigid or IMC clamps snap-on, steel 100203 1-1/4" Rigid or IMC clamps snap-on, steel 50204 1-1/2" Rigid or IMC clamps snap-on, steel 25205 2 Rigid or IMC clamps snap-on, steel 25

For Flex Metal Conduit or Armored Cable

BridgeportPartNumber Size Cable Range Description Buy Pkg890-MC 14/2, 12/2 Armored cable - .475" -

.525" Snap on strap supports round steel or aluminum MC cable 100

EMT, GRC, IMC Nail StrapsRound

Zinc Plated

MinerallacPartNumber Size Description Buy Pkg90117 1" Round style EMT/HW/IMC nail strap 100

FrostFrost


E

CONDUIT MOUNTING DEVICESEMT Nail Straps

For EMT to WoodMalleable Iron

Crouse HindsPartNumber Size Description Buy PkgNS1 1/2" EMT - 3/8" Rigid Nailing straps, cast steel, for EMT, MC, flex metal, armored cable to wood 100

Nail-Up StrapsEMT / Heavywall

Malleable Iron

RacoPartNumber Size Description Buy Pkg2253 3/4" EMT - 1/2" HW/IMC Nail-up strap, stamped steel, for conduit to wood 100

FrostFrost


E

CONDUIT MOUNTING DEVICESTwo-Hole Conduit Straps

EMT / HeavywallSteel

MinerallacPartNumber Size Type Buy Pkg265 1-1/4" EMT Pre-Galvanized Steel 100240 1/2" HW Pre-Galvanized Steel 100250 3/4" HW Pre-Galvanized Steel 100260 1" HW Pre-Galvanized Steel 100270 1-1/4" HW Pre-Galvanized Steel 100280 1-1/2" HW Zinc-Plated Steel 100290 2" HW Zinc-Plated Steel 100292 2-1/2" EMT - 2-1/2" HW Zinc-Plated Steel 100294 3" EMT - 3" HW Zinc-Plated Steel 100

PVC Coated Steel

OcalPartNumber Size Color Description2HS3/4-G 3/4" Gray 2-hole stamped pipe strap, .040" (40 mil) PVC coating2HS1-G 1" Gray 2-hole stamped pipe strap, .040" (40 mil) PVC coating2HS114-G 1 1/4" Gray 2-hole stamped pipe strap, .040" (40 mil) PVC coating2HS2-G 2" Gray 2-hole stamped pipe strap, .040" (40 mil) PVC coating

FrostFrost


E

CONDUIT MOUNTING DEVICESTwo-Hole Conduit Straps

Non-Metallic

CarlonPartNumber Size Description Buy PkgE977DC 1/2" 2-hole PVC conduit clamps, corrosion resistant 100E977EC 3/4" 2-hole PVC conduit clamps, corrosion resistant 100E977FC 1" 2-hole PVC conduit clamps, corrosion resistant 100E977GC 1 1/4" 2-hole PVC conduit clamps, corrosion resistant 50E977HC 1 1/2" 2-hole PVC conduit clamps, corrosion resistant 50E977JC 2" 2-hole PVC conduit clamps, corrosion resistant 25

BEAM CLAMPSBeam Clamps

Malleable Iron

Thomas & BettsPartNumber Raco Hole Size Flange Range Buy Pkg500SC 2524 Threaded hole - 1/4-20 tapped Fits flanges up to 15/16" thick 50509 Threaded hole - #10-24

tapped Fits flanges up to 15/16" thick 100501 2536 Threaded hole - 5/16-18

tapped Fits flanges up to 7/8" thick 50502 2538 Threaded hole - 3/8-16 tapped Fits flanges up to 1" thick 25503SC 2510 Threaded hole - 1/2-13 tapped Fits flanges up to 1" thick 20

FrostFrost


E


Stamped Steel

CaddyPartNumber Hole Size Flange Range Description Buy PkgBC Threaded hole - 1/4-20

tapped Fits flanges up to 1/2" For use w/ 1/4" and 3/8" rod, 1/4-20 or 10-24 threaded bridlerings, elec boxes 100

BC-8-12M Threaded hole - 1/4-20tapped Fits flanges up to 1/2" For use w/ 1/2" and 3/4" EMT or BX to beam (clamp type),

includes conduit clip 100BC200 Threaded hole - 1/4-20

tapped Fits flanges 1/8" - 5/8" Supports 1/4" threaded rod, 1/4" threaded bridle rings/boxes 50

Steel

MinerallacPartNumber Hole Size Flange Range Description Buy Pkg600 Threaded hole - 1/4-20

tapped (bottom/back) Fits flanges up to 1/2" For use w/ threaded rod, set screw tapped at an angle lockson beam 50

Junior Top BeamMalleable Iron

Thomas & BettsPartNumber Flange Range Description Buy PkgM777-1/2B Fits flanges up to 5/8" Fits rod size 1/2", black steel finish 100M777-3/8B Fits flanges up to 5/8" Fits rod size 3/8", black steel finish 100

FrostFrost


E


Thru Beam ClampChannel Series A

Thomas & BettsPartNumber Size Flange Range Description Buy PkgA-597 1-3/4"H x 3-1/2"D Fits flanges up to 1" Channel to beam (thru-hole) mounting clamp, gold galvanized 25

U-Bolt Clamp - Channel to Beam Window Clamp

Thomas & BettsPartNumber Load Material Description Buy PkgU501 Design Load - 2150 lbs Gold Galvanized Fits A1200, A1400, B1200, B1400, B1402, C1200 20U501-SS Design Load - 2150 lbs Stainless Steel Fits A1200, A1400, B1200, B1400, B1402, C1200 20U502 Design Load - 3000 lbs Gold Galvanized For back-to-back strut, fits A1202 , A1402 , C1202 , H1200 20U502-SS Design Load - 3000 lbs Stainless Steel For back-to-back strut, fits A1202 , A1402 , C1202 , H1200 20

CADDY FASTENERS FOR CABLE/CONDUITFasteners - Cable/Conduit

Conduit Clips - Spring SteelFinger Closure

CaddyPartNumber Mounting Hole Description Buy Pkg6-M 9/32" Plain 3/8" EMT, 14-2 thru 12-3 MC/BX hanger 1008-12-M 9/32" Plain 1/2" - 3/4" EMT or BX hanger 100

FrostFrost


E


Flange Mount Conduit Clip Push-InHammer-On

CaddyPartNumber Flange Size Description Buy Pkg12-P-2-4 Fits flanges 1/8" - 1/4" 3/4" EMT 10016-P-2-4 Fits flanges 1/8" - 1/4" 1" EMT 10012-P-2-4-SM Fits flanges 1/8" - 1/4" 3/4" EMT, side mount 10016-P-2-4-SM Fits flanges 1/8" - 1/4" 1" EMT, side mount 100

Flange Mount Conduit Clip Snap CloseHammer-On

CaddyPartNumber Flange Size Description Buy Pkg6-M-2-4 Fits flanges 1/8" - 1/4" For 3/8" MC/AC, pivots thru 360 degrees 1006-M-5-8 Fits flanges 5/16" - 1/2" For 3/8" MC/AC, pivots thru 360 degrees 1008-12-M-2-4 Fits flanges 1/8" - 1/4" For 1/2" & 3/4" EMT, pivots thru 360 degrees 1008-12-M-5-8 Fits flanges 5/16" - 1/2" For 1/2" & 3/4" EMT, pivots thru 360 degrees 10016-M-2-4 Fits flanges 1/8" - 1/4" For 1" EMT or BX, pivots thru 360 degrees 10016-M-5-8 Fits flanges 5/16" - 1/2" For 1" conduit, clip pivots thru 360 degrees 1006-M-2-4-SM Fits flanges 1/8" - 1/4" For 3/8" EMT, MC or BX, side mount conduit clip, clip pivots thru 360

degrees 1006-M-5-8-SM Fits flanges 5/16" - 1/2" For 3/8" MC/AC, side mount conduit clip, clip pivots thru 360 degrees 1008-12-M-2-4-SM Fits flanges 1/8" - 1/4" For 1/2" & 3/4" EMT or BX side mount conduit clip, clip pivots thru 360

degrees 1008-12-M-5-8-SM Fits flanges 5/16" - 1/2" For 1/2" - 3/4" conduit, side mount conduit clip,clip pivots thru 360

degrees 10016-M-2-4-SM Fits flanges 1/8" - 1/4" For 1" conduit, side mount conduit clip, clip pivots thru 360 degrees 100

FrostFrost


E


Multi-Purpose Clip - Datacomm/ITSHammer-On

CaddyPartNumber Flange Size Description Buy Pkg2FMP-28 Fits flanges 1/8" to 1/2" Multi-purpose clip, for 1/4"-20 or #10-24 threaded/unthreaded bridle

rings, wire clips, conduit hooks 100

Conduit Hangers From Flange, Wire or Rod

CaddyPartNumber Description Buy PkgKX Conduit hanger for 14/2 - 12/3 MC/AC or BX to #8 wire (Bat wings) 100K-8 Conduit hanger for 1/2" EMT to 1/4" and smaller rods/ flanges 100K-12 Conduit hanger for 3/4" EMT to 1/4" and smaller rods/ flanges 100K-16 Conduit hanger for 1" conduit to rod or flange 100K-20 Conduit hanger for 1-1/4" conduit to rod or flange 100

Drop Wire Support

CaddyPartNumber Description Buy PkgPCS1 Flexible cable support - #8-#12 drop wire for MC/AC 14-2 thru 12-3 w/ grnd up to .600

O.D. 100

FrostFrost


E


Multi-Function Clip

CaddyPartNumber Flange Size Description Buy Pkg4Z34 Fits flanges 1/8" - 3/8" Multi-function clip attaches to #12 wire thru 1/4" plain rod, #10-24 &

1/4-20 thread 100

Snap-In Support MC/AC Cable Flexible Conduitw/ Stabilizer Legs

CaddyPartNumber Flange Size Description Buy PkgMAC2T 1 to 4 runs of MC/AC to metal stud 100MAC2 Up to 1/8" flange 1 to 2 runs of MC/AC to metal/wood stud & flange, snaps in half 100MAC2ATA 1 to 2 runs of MC/AC to acoustical tee, snap-in 100MAC2BC Fits flanges 1/8" thru 1/2" 1 to 2 runs of MC/AC to flange 100MAC224SM Fits flanges 1/8" thru 1/4" 1 to 2 runs of MC/AC to flange, side mount 100MAC224 Fits flanges 1/8" thru 1/2" 1 to 2 runs of MC/AC to flange - bottom mount rotates 360º 100MAC258 Fits flanges 5/16" thru 1/2" 1 to 2 runs of MC/AC to flange - bottom mount rotates 360º 100MAC2912 Fits flanges 1/2" thru 3/4" 1 to 2 runs of MC/AC to flange - bottom mount rotates 360º 100

Cable Snap ClipsCable/MC/AC

CaddyPartNumber Flange Size Description Buy PkgSC2D Fits flanges 1/16" thru

3/16" Supports cable to beam (cable range 0.468" - 0.562") 100SC2E Fits flanges 1/16" thru

3/16" Supports cable to beam (cable range 0.500" - 0.718") 100SC4D Fits flanges 3/16" thru

9/32" Supports cable to beam (cable range 0.468" - 0.562") 100SC4E Fits flanges 3/16" thru

9/32" Supports cable to beam (cable range 0.500" - 0.718") 100SC8D Fits flanges5/16" thru 1/2" Supports cable to beam (cable range 0.468" - 0.562") 100

FrostFrost


E


Combination Box/Conduit Hanger Drop Wire / Rod / Beam

CaddyPartNumber Description Buy Pkg4-WN Combination washer-wing nut, 1/4-20 thread (for use with M-2-4S) 100

CADDY FASTENERS FOR BEAM/PURLINFasteners - Beam/Purlin

Hammer-On Flange ClipsUniversal

CaddyPartNumber Flange Size Description Buy PkgM-2-4 Fits flanges 1/8" - 1/4" Beam clamp w/ 1/4-20 thread impression (bottom & side) 100M-2-4-S Fits flanges 1/8" - 1/4" Same as M-2-4 with 1/4-20 x 3/8" stud out bottom 100M-5-8 Fits flanges 5/16" - 1/2" Beam clamp w/ 1/4-20 thread impression (bottom & side) 1004H-2-4 Fits flanges 1/8" - 1/4" Beam clamp w/ hole provided in tab for 1/4" bolt 1004H58 Fits flanges 5/16" - 1/2" Beam clamp w/ hole provided in tab for 1/4" bolt 100

"Z" Purlin ClipsHammer-On

CaddyPartNumber Description123-8-12M 1/2" - 3/4" conduit clamp to Z Purlin

FrostFrost


E

CADDY FASTENERS FOR METAL STUDSFasteners - Metal Studs

Switch Box or Conduit to Metal Stud

CaddyPartNumber Description Buy Pkg6-MF Supports 3/8" conduit, MC or BX to metal stud 1008-12-MF Supports 1/2" to 3/4" conduit to metal stud 10016-MF Supports 1" conduit to metal stud 100

Screw On Box Support

CaddyPartNumber Description Buy Pkg350 Metal stud box support, inside or outside 100350-8-12-M Supports 1/2" or 3/4" conduit to metal stud, inside or outside 100350-16-M Supports 1" conduit to metal stud 100

MC/AC Cable to Metal Stud

CaddyPartNumber Description Buy Pkg449 MC or BX snap clamp (14-2 to 12-3) to metal stud 100

FrostFrost


E


Adjustable Far Side Box SupportRunway Support Kit

CaddyPartNumber Description Buy Pkg766A Provides Far Side electrical box support in various stud wall depths (adjustable) 100

Cable Gripper

CaddyPartNumber Description Buy PkgCG4 Cable Gripper supports up to 8 4-pair UTP securely with locking/unlocking system 100

"Colorado Jim" Cable Support

CaddyPartNumber Description Buy PkgCJ-6 Cable support to attach Romex, AC, BX, & MC cable to wood or metal stud 100

Screw On Conduit Support

CaddyPartNumber Description Buy PkgCS812 Screw-on 1/2" & 3/4" EMT conduit, MC/AC to metal or wood stud, for 1-1/2" deep box 100CS812D Attaches 1/2" & 3/4" EMT conduit, MC/AC to metal or wood stud, for 2-1/8" deep box 100

FrostFrost


E


"Florida Bob" Through Stud Cable/Conduit Support

CaddyPartNumber Description Buy PkgFB6M Provides support for horizontal runs of AC, MC & BX thru metal stud 100

Floor Mounted Box Supports for Concrete Forms

CaddyPartNumber Description Buy PkgFBS12 12"H floor mounted box supports, for elec. boxes from floor or concrete forms 50FBS18 18"H floor mounted box supports, for elec. boxes from floor or concrete forms 50

Romex NMC and MC/AC Cable Support for Stud

CaddyPartNumber Description Buy PkgFXC20 Romex 14-2 w/ground thru 12-3 w/ground, MC/AC cable 14-2 thru 12-3 for studs 100

Mounting Bracket for Any Electric Box

CaddyPartNumber Description Buy PkgH2-3 4" square & 4-11/16" outlet boxes to 2-1/2" & 3-1/2" metal studs 100H4 4" square & 4-11/16" outlet boxes to 4" metal stud 100H6 4" square & 4-11/16" outlet boxes to 6" metal stud 50

FrostFrost


E


Box Mounting Brackets

CaddyPartNumber Description Buy PkgRBS16 16" box mntg brackets for between studs, mounts up to three 4" or 4-11/16" boxes 25RBS24 24" box mntg brackets for between studs, mounts up to four 4" or 4-11/16" boxes 25

Screw Gun Box Bracket

CaddyPartNumber Description Buy PkgTSGB-16 Screw gun bracket for metal stud 11" to 18" spacing, 1-1/2" or 2-1/8" box 50TSGB-24 Screw gun bracket for metal stud 17" to 26" spacing, 1-1/2" or 2-1/8" box 50

Press-On Protection Plate for Wood and Metal Studs

CaddyPartNumber Description Buy Pkg304B2 16 GA. steel with zinc phosphate 100

FrostFrost


E

CADDY FASTENERS FOR ACCOUSTICAL TEE BARFasteners - Accoustical Tee Bars

"Twist On" Fixture Support

CaddyPartNumber Description Buy Pkg4G16 Twist clip, supports fixture from tee bar, 1/4-20 stud, 5/8" long 1004G161.5 Twist clip, supports fixture from tee bar, 1/4-20 stud, 1-1/2" long 100

Electrical Component Supports

CaddyPartNumber Description Buy PkgATA4I Top mount clip w/ 1/4-20 thread impression, snaps onto acoustical tee bar 100ATS4I Side mount clip w/ 1/4-20 thread impression, snaps onto acoustical tee bar 1006MATA For MC/AC cable 100

Snap On Fixture/Box Hanger

CaddyPartNumber Description Buy Pkg512A Height adjustable to 8" - 24" span, (1) BHC included 50BHC Box mounting clip - screw furnished, for ,mounting additional boxes on 512A 100

FrostFrost


E


T-Grid Box Hanger

CaddyPartNumber Description Buy Pkg512HD Heavy duty elec. box hanger w/box mounting clip - 24" span 25512HDXT Extension bracket 3-5/8" height, attached between T-Grif and 512HD 50

Independent Support Clips

CaddyPartNumber Description Buy PkgIDS Independent support clips, fit most acoustical T-grid, 5/8" stud length,15/16" grid size 100

Lay In and Troffer Light Support Clips

CaddyPartNumber Description Buy Pkg515A Clip for securely fastening lay-in troffers to round or rectangular head tee-bar 100

FrostFrost


E


Suspension Bar for Light Fixtures

CaddyPartNumber Bar Type Description Buy Pkg517A Standard 5/8" x 1/4"

hanger Suspension bar hanger for "High Hat" light fixture, adj. 11"-26" 10517B Narrow 1/2" x 1/8" hanger Suspension bar hanger for "High Hat" light fixture, adj. 11"-26" 10

Independent Electrical Drop Wire/Rod Securing Clip

CaddyPartNumber Description Buy PkgEC311 Independent elec. drop wire/rod securing clip #12 thru #8 wire tied to clip 100

Pipe Sleeve Positioner

CaddyPartNumber Description Buy Pkg740 All sleeve diameters, 5/16" and under wall thickness 100

FrostFrost


E


Seismic Fixture Clamps

CaddyPartNumber Description Buy PkgSFCLT Set of 4 for one standard tapered 2’ x 4’ light fixture 25

CABLE CAT J-HOOKS, BRIDLE / DRIVE RINGSCable Cat Supports

Base ComponentsJ-Hooks

CaddyPartNumber Description Buy PkgCAT12 Up to 16 cables of 4 twisted pair or fiber optic, 3/4" dia. Loop 50CAT12BC Screw-On 1/8" thru 1/2" Flange 40CAT21 Up to 50 cables of 4 twisted pair or fiber optic and innerduct - 1-5/16" dia. Loop 80CAT32 Up to 80 cables of 4 twisted pair or fiber optic and innerduct - 2" dia. Loop 60CAT64 Up to 300 4-Pair UTP or 2-Strand Fiber Optic Cable 4" Dia. Loop 25CATHBA Angled hanger bracket for extension of J-Hook - 1/4" mounting hole 40

FrostFrost


E


Spring Steel FastenersJ-Hooks - Base Components

B-LinePartNumber Size Flange Size Description Buy PkgBCH12 3/4" 16 4 Pair UTP or 10 CAT6 50BCH21 1 5/16" 50 4 Pair UTP or 32 CAT6 80BCH32 2" 80 4 Pair UTP or 50 CAT6 60BCH64 4" 300 4 Pair UTP or 185 CAT6 25BCH12-U-2-4 3/4" Fits flanges 1/8" - 1/4" Allows 360 Deg. Rotation 50BCH21-U-2-4 1 5/16" Fits flanges 1/8" - 1/4" Allows 360 Deg. Rotation 50BCH32-U-2-4 2" Fits flanges 1/8" - 1/4" Allows 360 Deg. Rotation 50BCH64-U-2-4 4" Fits flanges 1/8" - 1/4" Allows 360 Deg. Rotation 25BCH21-U-5-8 1 5/16" Fits flanges 5/16" -

1/2" Allows 360 Deg. Rotation 50BCH32-U-5-8 2" Fits flanges 5/16" -

1/2" Allows 360 Deg. Rotation 50BCH21-C442 1 5/16" Fits flanges 1/8" - 5/8" Allows 360 Deg. Rotation 50BCH32-C442 2" Fits flanges 1/8" - 5/8" Allows 360 Deg. Rotation 50BCH12-RB 3/4" Angle Bracket w/ .265" Dia. hole 50BCH21-RB 1 5/16" Angle Bracket w/ .265" Dia. hole 50BCH32-RB 2" Angle Bracket w/ .265" Dia. hole 50BCH64-RB 4" Angle Bracket w/ .265" Dia. hole 25

Pre-Riveted Factory Assemblies3/4" Dia. Loop

CaddyPartNumber Flange Size Description Buy PkgCAT12TS J-Hook assembled to Acoustical tee bar bracket 60CAT12AB J-Hook assembled to angle bracket w/ 1/4" mounting hole 40CAT1224 Fits flanges 1/8" - 1/4" J-Hook assembled to a hammer-on clip, bottom mount, rotates 360º 40CAT1224SM Fits flanges 1/8" - 1/4" J-Hook assembled to hammer-on clip, side mount, rotates 360º 40CAT1258 Fits flanges 5/16" - 1/2" J-Hook to hammer-on clip - bottom mount, rotates 360º 40

FrostFrost


E


Pre-Riveted Factory Assemblies1-5/16" Dia. Loop

CaddyPartNumber Flange Size Description Buy PkgCAT21AB J-Hook assembled to angle bracket w/ 1/4" mounting hole 40CAT2124 Fits flanges 1/8" - 1/4" J-Hook assembled to hammer-on, bottom mount, rotates 360º 40CAT2158 Fits flanges 5/16" - 1/2" J-Hook assembled to hammer-on, bottom mount, rotates 360º 40CAT21BC Fits flanges 1/8" - 1/2" J-Hook assembled to screw-on bracket 40

2" Dia. Loop

CaddyPartNumber Flange Size Description Buy PkgCAT32AB J-Hook assembled to angle bracket - 1/4" mounting holes 40CAT3224 Fits flanges 1/8" - 1/4" J-Hook assembled to hammer-on, bottom mount, rotates 360º 20CAT3258 Fits flanges 5/16" - 1/2" J-Hook assembled to hammer-on, bottom mount, rotates 360º 20CAT32BC Fits flanges 1/8" - 1/2" J-Hook assembled to screw-on bracket 40CAT32BC200B Fits flanges 1/8" - 5/8" J-Hook assembled to screw-on bracket, rotates 360º 20CAT32BCB Fits flanges 1/8" - 1/2" J-Hook assembled to screw-on bracket, rotates 360º 20

Pulley Kit2" Dia. Loop

CaddyPartNumber Size Description Buy PkgCAT32PLR Accepts approx. (20)

4-Pair cables CAT32 spring loaded J-hook, pin, wheel, retainer, link, beam clamp 10

FrostFrost


E


Adjustable Cable Support

CaddyPartNumber Description Buy PkgCAT425 Adjustable cable support for 1/4" Threaded rod or horizontal surface 10

Briddle Rings

CaddyPartNumber Description Buy Pkg2-BRT-8 1/2" opening, 10-24 threaded 1002-BRT-12 3/4" opening, 10-24 threaded 1002-BRT-20 1-1/4" opening, 10-24 threaded 1002BRT32 2" opening, 10-24 threaded 1004BRT-20 1-1/4" opening, 1/4" - 20 threaded 1004BRT-32 2" opening, 1/4" - 20 threaded 1004-BRT-64 4" opening, 1/4" - 20 threaded 504BRT20WS 1-1/4" opening, #14 wood screw threaded 1004BRT32WS 2" opening, #14 wood screw threaded 100

MinerallacPartNumber Description Buy Pkg634-RW 1" opening bridle ring, 3/16" dia. threaded 100648-RS 4" bridle ring w/ saddle 50

FrostFrost


E


Cable Support SpacerPre-Riveted Factory Assemblies

EricoPartNumber Description Buy PkgMCS50 MC/AC cable support spacer for up to 4 runs 50MCS100 Support bracket for #12-#14 AC up to 8 cables 50

GRIPPLE HANGERSGripple Cutting Tool

Small Cutter

GripplePartNumber Size Description Buy PkgGripple Cutter 9" (approx) Small Gripple cutter, wire rope cutter, for use w/ kit sizes No.1 - No. 4 1

Looped Hangers#2 Gripple

GripplePartNumber Size Rating Description Buy PkgHF2-LG-5FT No. 2 x 5’L 23-100lbs load Loop hanger, choke knot installation, use in place of threaded

rod, strap or chain 1/ea - 150/csHF2-LG-10FT No. 2 x 10’L 23-100lbs load Loop hanger, choke knot installation, use in place of threaded




rod, strap or chain 1/ea - 20/cs

FrostFrost


E

GRIPPLE HANGERSLooped Hangers

#2 Gripple w/ 1/4" Stud

GripplePartNumber Size Rating Description Buy PkgHF2-SQG-10FT No. 2 x 10’L 23-100lbs load 1/4-20 UNC Stud hanger 1/ea

Y-Toggle Fixture Hanger#2 Gripple

GripplePartNumber Size Rating Description Buy PkgYHF-2-TG-10FT-460MM No. 2 x 10’L 23-100lbs load Y-Fit toggle hanger, single hanger w/ double attachment

points, 18" leg length 2/ea

Looped HangersHang-Fast #3 Gripple

AssembledGripplePartNumber Size Rating Description Buy PkgHF3-10BB No. 3 x 10’L 101-200lbs load Hang-Fast No.3 gripple assembled 1/ea - 10/bg

FrostFrost


E

GRIPPLE HANGERSLooped Hangers

#3 Gripple

GripplePartNumber Size Rating Description Buy PkgHF3-LG-15FT No. 3 x 15’L 101-200lbs load Loop hanger, choke knot installation, use in place of threaded



rod, strap or chain 1/ea - 60/cs

Trapeze w/ Hook End#3 Gripple

GripplePartNumber Size Rating Buy PkgTZ3-HG-10FT No. 3 x 10’L 101-200lbs load 1/ea - 100/cs

Beam & Purlin ClipsGHF GripClip

Beam

GripplePartNumber Size Description Buy PkgGCB24 1/16" - 5/32" Beam & purlin clip, 2-4mm 100/bx

FrostFrost


E

GRIPPLE HANGERSGalvanized Wire Rope

Reel

GripplePartNumber Size Description Buy PkgROP-3MM-500FT-REEL 7x7 Construction Wire rope, galvanized, 3mm 500’ Reel

MISCELLANEOUS FASTENERS / HANGERSFasteners - Hangers

Mounting Plate BracketsMetallic

CaddyPartNumber Description Buy PkgMPLS One Gang low voltage drywall bracket 100MPLS2 Two Gang low voltage drywall bracket 100

Low Voltage Mounting Brackets

CaddyPartNumber Description Buy PkgMP1-S One gang plate mounting bracket to stud for new work LV Class 2 commercial outlets 25MP2-S Two gang plate mounting bracket to stud for new work LV Class 2 commercial outlets 25

Snap On Box SupportArlingtonPartNumber Description Buy PkgWDS Device leveler, plastic 100

FrostFrost


E


Snap On Box Support

CaddyPartNumber Description Buy PkgMSF Box support to outside of stud 100

Flexible Conduit And Cable Hanger

CaddyPartNumber Description Buy PkgWMX6 Flexible cable support bundles up to 6 runs for MC or AC (BX) 100

Steel Cable/MC HangerOne Piece

ArlingtonPartNumber Cable Type Description Buy PkgSMC4 14/2 - 10/4 Holds 4 Cables 25SMC4F 14/2 - 10/4 Holds 4 Cables, Mounts Flat 25SMC8 14/2 - 10/4 Holds 8 Cables, Mounts Flat 25

FrostFrost


E


Cable Stacker

3MPartNumber Cable Size Range Description Buy PkgSTAK-IT-SI-1 14-2 to 10-2 AWG Up to 0.30" wire range

roundCable stackers center multiple cables on a 2x4 framingmember, for flat NM/UF, round NM/UF, telephone/signalcables

25/Bag

Perforated Strapping

MinerallacPartNumber Coil/Reel Size Description Buy Pkg410C 10’ coil 3/4" x 0.035" Perforated stripping for

hanging large pipe/duct,pre-galvanized steel

Pre-Tied Wires1-1/4" Pin and Ballistic Clip

PrimePartNumber Size Gauge Buy Pkg12PHB11405 4’ Length 12 gauge wire 1/ea - 100/bu12PHB11406 6’ Length 12 gauge wire 1/ea - 100/bu12PHB11408 8’ Length 12 gauge wire 1/ea - 100/bu12PHB11410 10’ Length 12 gauge wire 1/ea - 100/bu12PHB11412 12’ Length 12 gauge wire 1/ea - 100/bu

Pre-Tied Wires - Twin Lead1-1/4" Pin and Ballistic Clip

PrimePartNumber Size Gauge Buy Pkg12PH11412T 12’ Length 12 gauge wire (Twin Lead) 1/ea - 100/bu

FrostFrost


E


Straight Ceiling Wire

PrimePartNumber Size Gauge Buy Pkg12HW6100 6’ Length 12 gauge wire 1/ea - 100/bu12HW8100 8’ Length 12 gauge wire 1/ea - 100/bu12HW10100 10’ Length 12 gauge wire 1/ea - 100/bu12HW12100 12’ Length 12 gauge wire 1/ea - 100/bu

Rod/ Wire Hangers - Angle BracketDrops From Concrete/Wood

CaddyPartNumber Load Description Buy PkgAB 160 lbs (Static Load) Angle bracket with 1/4" hole 100

Rod And Wire Hangers

CaddyPartNumber Description Buy Pkg6TB Suspends 1/4" or 3/8" threaded rod from laminated wood ceilings, joists, walls 100

FrostFrost


E


Deck Hangers/Punch

CaddyPartNumber Description Buy PkgTDH 3/8" Plain hole 50TDHT4 1/4" Plain Hole 50TDHT6 3/8" - 16 Nut 50TDHP Deck Hanger Punch 10

Speed-Link Cable Fasteners

CaddyPartNumber Length Size Buy PkgSLD2L1 3.3’ 2mm Cable 100SLD2L3 9.9’ 2mm Cable 100

Runway Support Kit

B-LinePartNumber Runway Height ATR Size Description Buy PkgSB-2116-A 1-1/2" 5/8" - 11 Runway support kit attaches to threaded rod (includes 2

hangers/hardware) 1

FrostFrost


E


Screw Gun Bracket

CaddyPartNumber Stud Ctr In Box Depth In Description Buy PkgSGB24A 24" 1-1/2" and 2-1/8" Screw gun bracket preset for studs 16" or 24" on center 50

Tie WireEPCOPartNumber Wire Gauge Description Buy PkgTY18G-50B 18 gauge 18" Length, bundle of 50 1

StaplesRomex & Service Entrance Staples

IdealPartNumber Size Cable Type Buy PkgBCS1-1 1/2" x 1" NMC, UF, TV Cable 100/BoxBCS1-5 1/2" x 1" NMC, UF, TV Cable 500/BoxBCS1-JR 9/16" x 1" NMC, UF, TV Cable 500/JarBCS2-1 9/16" x 1-1/4" NMC, UF, TV Cable 100/BoxBCS2-JR 9/16" x 1-1/4" NMC, UF, TV Cable 400/JarBMSE150-1 1-5/16" x 3/4" SEU 100/Box

FrostFrost


E


Staples - Plastic Insulated Metal ServiceRomex & Service Entrance Staples

Gardner BenderPartNumber Size Cable Type Description Buy PkgGSE-710 1-5/8" x 2-1/8" 4/0, SE, large BX,

Romex, GreenfieldService entrance cable straps, zinc plated nails w/ polyethylenestraps 1

Plastic StaplesRecessed Nail Heads

Gardner BenderPartNumber Size Cable Type Description Buy PkgPS-50 1/2" Romex/UF - 14/2, 12/2,

10/2Secures Romex, UF and other types of non-metallic cable,white 50

PS-550 1/2" Romex/UF - 14/2, 12/2,10/2

Secures Romex, UF and other types of non-metallic cable,white 500

PS-75 3/4" Romex/UF - 14/2, 12/2,10/2

Secures Romex, UF and other types of non-metalliccable,white 50

FrostFrost


E

ANCHORS / FASTENERSWall Dogs

Screw/Anchor CombinationPan Head

Powers FastenersPartNumber Size Color Description Design Load Lbs Buy Pkg2316 1 1/4" Chrome Light to medium duty one-piece screw anchor, all steel 85 (Wallboard), 700

(Concrete) 1002330 1 1/4" White Light to medium duty one-piece screw anchor, all steel 85 (Wallboard), 700

(Concrete) 1002289 1 1/4" Chrome Kit: Includes 50 Anchors & Phillips Screwdriver 85 (Wallboard), 700

(Concrete) 1 = 50 Pc2332 1 1/4" Chrome Kit: Includes 50 Anchors & Drill Bit 85 (Wallboard), 700

(Concrete) 1 = 50 Pc

Oval Head

Powers FastenersPartNumber Size Color Description Design Load Lbs Buy Pkg2314 1 1/4" Chrome Light to medium duty one-piece screw anchor, all steel 85 (Wallboard), 700

(Concrete) 1002328 1 1/4" White Light to medium duty one-piece screw anchor, all steel 85 (Wallboard), 700

(Concrete) 100

Zip-It FastenersScrew Anchors

Powers FastenersPartNumber Size Use Description Buy Pkg2345 1-11/16" Length 3/8" to 1" thick wall

board Nylon one-piece anchor, non-conductive, light/medium duty 1002346 1-11/16" Length 3/8" to 1" thick wall

board Zinc one-piece anchor, light/medium duty 1002349 1-11/16" Length 3/8" to 1" thick wall

boardZinc one-piece anchor w/ #8x1" screws included,light/medium duty 100

FrostFrost


E

ANCHORS / FASTENERSWall Anchors System Combination Kits

Multi-Size Anchors

GreenleePartNumber Size Description Buy Pkg84012 #10 x 1" #10, #12 anchors, 1/4" (C) bit--Combination Phillips/slotted, light duty 10084019 #10 x 1" #10, #12 anchors, 1/4" (B) bit--Combination Hex head/slotted, light duty 100

Spring Wing Toggle BoltsHollow Wall Anchors

Powers FastenersPartNumber Size Drill Dia. Description Buy Pkg4033 1/8" x 3" 3/8" drill dia. Mushroom head toggle bolt 504043 1/8" x 4" 3/8" drill dia. Mushroom head toggle bolt 504121 3/16" x 2" 1/2" drill dia. Round head toggle bolt 504133 3/16" x 3" 1/2" drill dia. Mushroom head toggle bolt 504143 3/16" x 4" 1/2" drill dia. Mushroom head toggle bolt 504233 1/4" x 3" 5/8" drill dia. Mushroom head toggle bolt 504243 1/4" x 4" 5/8" drill dia. Mushroom head toggle bolt 504261 1/4" x 6" 5/8" drill dia. Round head toggle bolt 504431 3/8" x 3" 7/8" drill dia. Round head toggle bolt 504441 3/8" x 4" 7/8" drill dia. Round head toggle bolt 50

Power Bolt Sleeve Type AnchorsHeavy Duty

Carbon Steel

Powers FastenersPartNumber Size Drill Dia. Description Buy Pkg6902 1/4" x 1-3/4" 1/4" drill dia. Hex head grade 5 bolt, for concrete, brick, stone, block 1006910 3/8" x 2-1/4" 3/8" drill dia. Hex head grade 5 bolt, for concrete, brick, stone, block 50

FrostFrost


E

ANCHORS / FASTENERSPower Stud Wedge Type Expansion Anchors

Carbon Steel Body & Expansion ClipConcrete Anchoring

Powers FastenersPartNumber Size Thread Length Description Buy Pkg7400SD1* 1/4" x 1-3/4" 3/4" Power stud (carbon steel body) + SD1 expansion clip 1007402SD1 1/4" x 2-1/4" 1-1/4" Power stud (carbon steel body) + SD1 expansion clip 1007410SD1* 3/8" x 2-1/4" 7/8" Power stud (carbon steel body) + SD1 expansion clip 507412SD1* 3/8" x 2-3/4" 1-3/8" Power stud (carbon steel body) + SD1 expansion clip 507413SD1 3/8" x 3" 1-58" Power stud (carbon steel body) + SD1 expansion clip 507415SD1 3/8" x 3-3/4" 2-3/8" Power stud (carbon steel body) + SD1 expansion clip 507420SD1* 1/2" x 2-3/4" 1" Power stud (carbon steel body) + SD1 expansion clip 507422SD1 1/2" x 3-3/4" 2" Power stud (carbon steel body) + SD1 expansion clip 507424SD1 1/2" x 5-1/2" 3-3/4" Power stud (carbon steel body) + SD1 expansion clip 507433SD1 5/8" x 5" 3" Power stud (carbon steel body) + SD1 expansion clip 257441SD1 3/4" x 4-3/4" 2-7/8" Power stud (carbon steel body) + SD1 expansion clip 257442SD1 3/4" x 5-1/4" 3-5/8" Power stud (carbon steel body) + SD1 expansion clip 257446SD1 3/4" x 7" 3-3/8" Power stud (carbon steel body) + SD1 expansion clip 20

Carbon Steel Body & Stainless Steel Expansion ClipConcrete Anchoring

Powers FastenersPartNumber Size Thread Length Description Buy Pkg7422SD2 1/2" x 3-3/4" 2-1/8" Power stud (carbon steel body)+SD2 stainless steel exp clip 507423SD2 1/2" x 4-1/2" 2-7/8" Power stud (carbon steel body)+SD2 stainless steel exp clip 50

Self Tapping AnchorsInternally Threaded

Snake + Screw Anchor

Powers FastenersPartNumber Size Description Buy Pkg6401SD 3/8" anchor size Carbon steel snake w/ screw anchor, 1-5/8" embedment, 23/32" internal

thread depth 506403SD 1/2" anchor size Carbon steel snake w/ screw anchor, 2-1/2" embedment, 15/16" internal

thread depth 50

FrostFrost


E

ANCHORS / FASTENERSMachine Screw Lead Anchors

Calk-Ins

Powers FastenersPartNumber Size Drill Dia. Min. Hole Depth Buy Pkg9210 #10-24 3/8" 5/8" 1009220 1/4"-20 1/2" 7/8" 1009230 3/8"-16 3/4" 1-1/4" 50

Lead Anchor Setting ToolsPowers FastenersPartNumber Size Description Buy Pkg9211 #10/24 Setting tool for lead anchors 19221 1/4" Setting tool for lead anchors 19231 3/8" Setting tool for lead anchors 1

Lok/Bolt Sleeve AnchorsExpansion Anchor

Carbon Steel

Powers FastenersPartNumber Size Description Buy Pkg5015 3/8" x 1 7/8" Hex Head 505020 3/8" x 3" Hex Head 505025 1/2" x 2 1/4" Hex Head 255125 1/4" x 5/8" Acorn Nut 1005150 1/4" x 1 3/8" Acorn Nut 1005205 1/4" x 1-1/8" Round Head 1005210 1/4" x 2" Round Head 1005235 3/8" x 2-1/2" Round Head 505810 1/4" x 1-1/2" Rod Hanger 505815 3/8" x 1-7/8" Rod Hanger 505825 1/2" x 2-1/4" Rod Hanger 255700 5/16" x 1-1/2" Tie-Wire 100

FrostFrost


E

ANCHORS / FASTENERSToggle Bolt Anchors

Steel Zinc PlatedToggler

CullyPartNumber Size Drill Dia. Description Buy Pkg58816 14-20 (1/4") screw

size 1/2" Hollow wall anchor, w/o bolt, high strength 100

Nail-Ins

Powers FastenersPartNumber Size Description Buy Pkg2431 3/16" x 1" Round head, nylon w/zinc plated steel nail 1002802 3/16" x 7/8" Mushroom head, Zamac 7 alloy 100

Drive Pin AnchorsAlloy Steel

Hammer-Screw - Zamac Alloy

Powers FastenersPartNumber Drill Dia Size Description Buy Pkg2840 1/4" 1/4" x 1" anchor Mushroom head w/ No.2 Phillips screw 1002842 1/4" 1/4" x 1 1/4" anchor Mushroom head w/ No.2 Phillips screw 1002844 1/4" 1/4" x 1 1/2" anchor Mushroom head w/ No.2 Phillips screw 100

FrostFrost


E

ANCHORS / FASTENERSDrive Pin Anchors

Alloy SteelNail-in - Zamac Alloy

Powers FastenersPartNumber Drill Dia Size Description Buy Pkg2814 1/4" 1/4" x 1 1/4" anchor Mushroom head Zamac nail-in w/ carbon steel nail 100

PlasticNylon Nail-in

Powers FastenersPartNumber Drill Dia Size Description Buy Pkg2528 1/4" 1/4" x 1" anchor Mushroom head, nylon nail-in, plastic body w/ nail 100

Steel Drop-InsInternal Plugs / Setting Tools

Powers FastenersPartNumber Drill Dia Size Description Buy Pkg6304 1/4" 1" (Overall length) Internal plug, 7/16" thread depth 1006305 1/4" 39/64" (Pin length) Setting tool for 6304 16306 3/8" 1-9/16" (Overall length) Internal plug, 5/8" thread depth 506307 3/8" 61/64" (Pin length) Setting tool for 6306 16308 1/2" 2" (Overall length) Internal plug, 13/16" thread depth 506309 1/2" 1-3/16" (Pin Length) Setting tool for 6308 1

FrostFrost


E

ANCHORS / FASTENERSSpike Anchors

Powers FastenersPartNumber Drill Dia Size Description Buy Pkg5524 1/4" 1/4"x1-1/2" Mushroom head, tamperproof 1003755 13/16" 1/4"x1-1/4" Pipe spike, rod hanging, alternative to direct fastening 1003759 1/4" 1/4"x1-1/4" Tie-wire spike w/ 9/32" hole, alternative to direct fastening 100

SCREWS, NUTS & WASHERSMachine Screws - Flat Head / Round Head

FHMS - Flat Head Slotted

CullyPartNumber Size Description Buy Pkg50112J 6-32 X 3/4" Flat Head slot drive machine screw, zinc 100/Jar50116J 6/32 x 1" Flat Head slot drive machine screw, zinc 100/Jar50120J 6-32 X 1-1/4" Flat Head slot drive machine screw, zinc 100/Jar50124J 6-32 X 1-1/2" Flat Head slot drive machine screw, zinc 100/Jar50132J 6-32 X 2" Flat Head slot drive machine screw, zinc 100/Jar50140J 6-32 X 2-1/2" Flat Head slot drive machine screw, zinc 100/Jar50316J 8-32 X 1" Flat Head slot drive machine screw, zinc 100/Jar50320J 8-32 X 1-1/4" Flat Head slot drive machine screw, zinc 100/Jar50324J 8-32 X 1-1/2" Flat Head slot drive machine screw, zinc 100/Jar50332J 8-32 X 2" Flat Head slot drive machine screw, zinc 100/Jar

FrostFrost


E


RHMS - Round Head "Combo" Slotted/Phillips

CullyPartNumber Size Description Buy Pkg52208J 6-32 X 1/2" Round Head Slot/Phil drive machine screw 100/Jar52212J 6-32 X 3/4" Round Head Slot/Phil drive machine screw 100/Jar52216J 6/32x1" Round Head Slot/Phil drive machine screw 100/Jar52220J 6-32 X 1-1/4" Round Head Slot/Phil drive machine screw 100/Jar52224J 6-32" X 1-1/2" Round Head Slot/Phil drive machine screw 100/Jar52232J 6-32" X 2" Round Head Slot/Phil drive machine screw 100/Jar52240J 6-32 X 2-1/2" Round Head Slot/Phil drive machine screw 100/Jar52248J 6-32 X 3" Round Head Slot/Phil drive machine screw 100/Jar52406J 8-32 X 3/8" Round Head Slot/Phil drive machine screw 100/Jar52408J 8-32 X 1/2" Round Head Slot/Phil drive machine screw 100/Jar52412J 8-32 X 3/4" Round Head Slot/Phil drive machine screw 100/Jar52416J 8-32 X 1" Round Head Slot/Phil drive machine screw 100/Jar52420J 8-32 X 1-1/4" Round Head Slot/Phil drive machine screw 100/Jar52424J 8-32 X 1-1/2" Round Head Slot/Phil drive machine screw 100/Jar52432J 8-32 X 2" Round Head Slot/Phil drive machine screw 100/Jar52440J 8-32 X 2-1/2" Round Head Slot/Phil drive machine screw 100/Jar52608J 10-24 X 1/2" Round Head Slot/Phil drive machine screw 100/Jar52612J 10-24 X 3/4" Round Head Slot/Phil drive machine screw 100/Jar52616J 10-24 X 1" Round Head Slot/Phil drive machine screw 100/Jar52620J 10-24 X 1-1/4" Round Head Slot/Phil drive machine screw 100/Jar52624J 10-24 X 1-1/2" Round Head Slot/Phil drive machine screw 100/Jar52632J 10-24 X 2" Round Head Slot/Phil drive machine screw 100/Jar52809J 10-32 X 1/2" Round Head Slot/Phil drive machine screw 100/Jar52813J 10-32 X 3/4" Round Head Slot/Phil drive machine screw 100/Jar52817J 10-32 X 1" Round Head Slot/Phil drive machine screw 100/Jar52821J 10-32 X 1-1/4" Round Head Slot/Phil drive machine screw 100/Jar52825J 10-32 X 1-1/2" Round Head Slot/Phil drive machine screw 100/Jar52833J 10-32 X 2" Round Head Slot/Phil drive machine screw 100/Jar53006J 1/4-20 X 3/8" Round Head Slot/Phil drive machine screw 100/Jar53008J 1/4-20 X 1/2" Round Head Slot/Phil drive machine screw 100/Jar53012J 1/4-20 X 3/4" Round Head Slot/Phil drive machine screw 100/Jar53016J 1/4-20 X 1" Round Head Slot/Phil drive machine screw 100/Jar53020J 1/4-20 X 1-1/4" Round Head Slot/Phil drive machine screw 100/Jar53024J 1/4-20 X 1-1/2" Round Head Slot/Phil drive machine screw 100/Jar53032J 1/4-20 X 2" Round Head Slot/Phil drive machine screw 100/Jar53040J 1/4-20 X 2-1/2" Round Head Slot/Phil drive machine screw 100/Jar53048J 1/4-20 X 3" Round Head Slot/Phil drive machine screw 100/Jar53064J 1/4-20 X 4" Round Head Slot/Phil drive machine screw 100/Jar

FrostFrost


E


Electricians Screw Kits - Flat Head / Round Head

Gardner BenderPartNumber Size Description Buy PkgSK-632 Assorted Sizes 6-32 Flat head electrician’s screw kit consists of sizes: 3/4", 1", 1-1/4",

1-1/2", 2", 3" (1) = 370-Piece Kit

BULK - Machine Screws - Flat/ Round /Pan HeadFlat Head Phillips Machine Screws

Phillips Head

PorteousPartNumber Size Description Buy Pkg00401-0606-021 6-32 x 3/8" Flat Head Phillips Machine Screw, zinc blue 1/34000 Bulk00401-0608-021 6-32 x 1/2" Flat Head Phillips Machine Screw, zinc blue 1/26000 Bulk00401-0612-021 6-32 X 3/4" Flat Head Phillips Machine Screw, zinc blue 1/10000 Bulk00401-0616-021 6-32 x 1" Flat Head Phillips Machine Screw, zinc blue 1/10000 Bulk00401-0806-021 8-32 X 3/8" Flat Head Phillips Machine Screw, zinc blue 1/23000 Bulk00401-0808-021 8-32 X 1/2" Flat Head Phillips Machine Screw, zinc blue 1/18000 Bulk00401-0812-021 8-32 X 3/4" Flat Head Phillips Machine Screw, zinc blue 1/12000 Bulk00401-0816-021 8-32 X 1" Flat Head Phillips Machine Screw, zinc blue 1/9000 Bulk00401-1006-021 10-24 x 3/8" Flat Head Phillips Machine Screw, zinc blue 1/16000 Bulk00401-1008-021 10-24 X 1/2" Flat Head Phillips Machine Screw, zinc blue 1/13000 Bulk00401-1012-021 10-24 X 3/4" Flat Head Phillips Machine Screw, zinc blue 1/9000 Bulk00401-1016-021 10-24 X 1" Flat Head Phillips Machine Screw, zinc blue 1/6500 Bulk00401-2408-021 1/4-20 X 1/2" Flat Head Phillips Machine Screw, zinc blue 1/7000 Bulk00401-2412-021 1/4-20 X 3/4" Flat Head Phillips Machine Screw, zinc blue 1/5000 Bulk00401-2416-021 1/4-20 X 1" Flat Head Phillips Machine Screw, zinc blue 1/4000 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSBULK - Machine Screws - Flat/ Round /Pan Head

Round Head Phillips Machine ScrewsPhillips Head

PorteousPartNumber Size Description Buy Pkg00411-0610-021 6-32 x 5/8" Round Head Phillips Machine Screw, zinc blue 1/5000 Bulk00411-1130-021 10-32 x 3" Round Head Phillips Machine Screw, zinc blue 1/800 Bulk00411-2416-021 1/4-20 x 1" Round Head Phillips Machine Screw, zinc blue 1/1750 Bulk00411-2418-021 1/4-20 x 1-1/4" Round Head Phillips Machine Screw, zinc blue 1/1500 Bulk

Round Head Combo Machine ScrewsCombo Head - Slotted/Phillips

PorteousPartNumber Size Description Buy Pkg00412-0608-021 6-32 x 1/2" Round Head Combo Machine Screw, zinc blue 1/6250 Bulk00412-0612-021 6-32 x 3/4" Round Head Combo Machine Screw, zinc blue 1/5500 Bulk00412-0616-021 6-32 x 1" Round Head Combo Machine Screw, zinc blue 1/5000 Bulk00412-0806-021 8-32 x 3/8" Round Head Combo Machine Screw, zinc blue 1/8000 Bulk00412-0808-021 8-32 x 1/2" Round Head Combo Machine Screw, zinc blue 1/8000 Bulk00412-0812-021 8-32 x 3/4" Round Head Combo Machine Screw, zinc blue 1/5500 Bulk00412-0816-021 8-32 x 1" Round Head Combo Machine Screw, zinc blue 1/4000 Bulk00412-1008-021 10-24 x 1/2" Round Head Combo Machine Screw, zinc blue 1/4000 Bulk00412-1012-021 10-24 x 3/4" Round Head Combo Machine Screw, zinc blue 1/2800 Bulk00412-1016-021 10-24 x 1" Round Head Combo Machine Screw, zinc blue 1/2800 Bulk00412-1116-021 10-32 x 1" Round Head Combo Machine Screw, zinc blue 1/2000 Bulk00412-1120-021 10-32 x 1-1/2" Round Head Combo Machine Screw, zinc blue 1/2000 Bulk00412-1124-021 10-32 x 2" Round Head Combo Machine Screw, zinc blue 1/1400 Bulk00412-2406-021 1/4-20 x 3/8" Round Head Combo Machine Screw, zinc blue 1/3500 Bulk00412-2408-021 1/4-20 x 1/2" Round Head Combo Machine Screw, zinc blue 1/3000 Bulk00412-2412-021 1/4-20 x 3/4" Round Head Combo Machine Screw, zinc blue 1/2250 Bulk00412-2416-021 1/4-20 x 1" Round Head Combo Machine Screw, zinc blue 1/1750 Bulk00412-2420-021 1/4-20 x 1-1/2" Round Head Combo Machine Screw, zinc blue 1/1250 Bulk00412-2424-021 1/4-20 x 2" Round Head Combo Machine Screw, zinc blue 1/850 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSBULK - Machine Screws - Flat/ Round /Pan Head

Pan Head Phillips Machine ScrewsPhillips Head

PorteousPartNumber Size Description Buy Pkg00431-0616-021 6-32 x 1" Pan Head Phillips Machine Screw, zinc blue 1/12000 Bulk00431-0620-021 6-32 x 1-1/2" Pan Head Phillips Machine Screw, zinc blue 1/9000 Bulk 00431-0624-021 6-32 x 2" Pan Head Phillips Machine Screw, zinc blue 1/4000 Bulk00431-0626-021 6-32 x 2-1/2" Pan Head Phillips Machine Screw, zinc blue 1/3500 Bulk00431-0816-021 8-32 x 1" Pan Head Phillips Machine Screw, zinc blue 1/7000 Bulk00431-0820-021 8-32 x 1-1/2" Pan Head Phillips Machine Screw, zinc blue 1/5000 Bulk00431-0824-021 8-32 x 2" Pan Head Phillips Machine Screw, zinc blue 1/4000 Bulk00431-1016-021 10-24 x 1" Pan Head Phillips Machine Screw, zinc blue 1/5500 Bulk00431-1020-021 10-24 x 1-1/2" Pan Head Phillips Machine Screw, zinc blue 1/3500 Bulk00431-1024-021 10-24 x 2" Pan Head Phillips Machine Screw, zinc blue 1/2000 Bulk00431-1026-021 10-24 x 2-1/2" Pan Head Phillips Machine Screw, zinc blue 1/1800 Bulk00431-1030-021 10-24 x 3" Pan Head Phillips Machine Screw, zinc blue 1/1500 Bulk00431-1116-021 10-32 x 1" Pan Head Phillips Machine Screw, zinc blue 1/5500 Bulk00431-1120-021 10-32 x 1-1/2" Pan Head Phillips Machine Screw, zinc blue 1/3500 Bulk00431-1124-021 10-32 x 2" Pan Head Phillips Machine Screw, zinc blue 1/2000 Bulk 00431-1126-021 10-32 x 2-1/2" Pan Head Phillips Machine Screw, zinc blue 1/1800 Bulk00431-1130-021 10-32 x 3" Pan Head Phillips Machine Screw, zinc blue 1/1200 Bulk00431-2416-021 1/4-20 x 1" Pan Head Phillips Machine Screw, zinc blue 1/3200 Bulk00431-2420-021 1/4-20 x 1-1/2" Pan Head Phillips Machine Screw, zinc blue 1/2100 Bulk00431-2424-021 1/4-20 x 2" Pan Head Phillips Machine Screw, zinc blue 1/1500 Bulk00431-2426-021 1/4-20 x 2-1/2" Pan Head Phillips Machine Screw, zinc blue 1/1200 Bulk00431-2430-021 1/4-20 x 3" Pan Head Phillips Machine Screw, zinc blue 1/1000 Bulk00431-2440-021 1/4-20 x 4" Pan Head Phillips Machine Screw, zinc blue 1/800 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSSheet Metal Screws

Pan Head "Combo" Slotted/Phillips Head

CullyPartNumber Size Description Buy Pkg18609J 6 X 1/2" Bit size #1 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18617J 6 X 1" Bit size #1 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18809J 8 X 1/2" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18813J 8 X 3/4" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18817J 8 X 1" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18821J 8 X 1-1/4" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18825J 8 X 1-1/2" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar18833J 8 X 2" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19009J 10 X 1/2" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19013J 10 X 3/4" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19017J 10 X 1" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19021J 10 X 1-1/4" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19025J 10 X 1-1/2" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19033J 10 X 2" Bit size #2 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19217J 12 X 1" Bit size #3 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19221J 12 X 1-1/4" Bit size #3 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19225J 12 X 1-1/2" Bit size #3 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19233J 12 X 2" Bit size #3 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar19249J 12 X 3" Bit size #3 - Pan head Phil/Slot combo drive sheet metal screw, zinc 100/Jar

BULK - Pan Head Phillips Tapping ScrewsSheet Metal Screws

PorteousPartNumber Size Description Buy Pkg00631-0820-021 #8 x 1-1/2" Bulk quantity Sheet metal tapping screws, Phillips Pan head, blue zinc 1/4500 Bulk00631-1016-021 #10 x 1" Bulk quantity Sheet metal tapping screws, Phillips Pan head, blue zinc 1/5500 Bulk00631-1020-021 #10 x 1-1/2" Bulk quantity Sheet metal tapping screws, Phillips Pan head, blue zinc 1/3500 Bulk00631-1216-021 #12 x 1" Bulk quantity Sheet metal tapping screws, Phillips Pan head, blue zinc 1/4300 Bulk00631-1220-021 #12 x 1-1/2" Bulk quantity Sheet metal tapping screws, Phillips Pan head, blue zinc 1/3000 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSStud Screw - Metal Piercing

Wafer Head Sharp Point

CullyPartNumber Size Description Buy Pkg14809J 8 X 1/2" Wafer Head, sharp point, Phillips, metal piercing stud screw 100/Jar

TEK ScrewsWafer Head Lath Phillips Tek Screws

Lath

CullyPartNumber Size Description Buy Pkg26809J 8 X 1/2" Wafer Head Lath Phillips Tek Screw, self-drilling, larger bearing surface 100/Jar26809-6 8 X 1/2" Wafer Head Lath Phillips Tek Screw, self-drilling, larger bearing surface 1000/Box26821J 8 X 1-1/4" Wafer Head Lath Phillips Tek Screw, self-drilling, larger bearing surface 100/Jar26821-6 8 X 1-1/4" Wafer Head Lath Phillips Tek Screw, self-drilling, larger bearing surface 500/Pk

CullyPartNumber Size Description Buy Pkg26813J 8 X 3/4" Wafer Head Lath Phillips Tek Screw, self-drilling, larger bearing surface 100/Jar

FrostFrost


E

SCREWS, NUTS & WASHERSTEK Screws

Hex Washer Head Tek Screws

CullyPartNumber Size Description Buy Pkg78808J 8-18 X 1/2" Hex Washer Head, #8- #10 tek screws features a #2 drill point 100/Jar79012J 10-16 X 3/4" Hex Washer Head, #8- #10 tek screws features a #2 drill point 100/Jar79016J 10-16 X 1" Hex Washer Head, #8-#10 tek screws features a #2 drill point 100/Jar79216J 12-14 X 1" Hex Washer Head, #12 tek screws features a #3 drill point 100/Jar

Pan Head Phillips Tek Screws

CullyPartNumber Size Description Buy Pkg82616J 6-20 x 1" Pan Head Phillips Tek Screws, #6 tek screws feature a #1 drill point 100/Jar82808J 8-18 X 1/2" Pan Head Phillips Tek Screws, #8 - #10 tek screws feature a #2 drill point 100/Jar82812J 8-18 X 3/4" Pan Head Phillips Tek Screws, #8 - #10 tek screws feature a #2 drill point 100/Jar83012J 10-16 X 3/4" Pan Head Phillips Tek Screws, #8 - #10 tek screws feature a #2 drill point 100/Jar83016J 10-16 X 1" Pan Head Phillips Tek Screws, #8 - #10 tek screws feature a #2 drill point 100/Jar

FrostFrost


E

SCREWS, NUTS & WASHERSTEK Screws

Quick Drive Collated ScrewsTek Point

Quick DrivePartNumber Size Description Buy PkgDWFSD114PS 1-1/4" #2 Phillips Bugle Head Yellow Zinc Fine Thread Screw Collated Strips, #6

fine shank diameter. (1) Box = (2500/Pcs)DWFSD158PS 1-5/8" #2 Phillips Bugle Head Yellow Zinc Fine Thread Screw Collated Strips, #6

fine shank diameter. (1) Box = (2500/Pcs)DWFSD178PS 1-7/8" #2 Phillips Bugle Head Yellow Zinc Fine Thread Screw Collated Strips, #6

fine shank diameter. (1) Box = (2000/Pcs)

Drywall ScrewsBlack Fine Thread

Phillips Head

CullyPartNumber Size Color Description Buy Pkg79616J #6 X 1" Black Finish Fine Thread drywall screws, bugle head, phillips 100/Jar79624J #6 x 1-1/4" Black Finish Fine Thread drywall screws, bugle head, phillips 100/Jar79626J #6 x 1-5/8" Black Finish Fine Thread drywall screws, bugle head, phillips 100/Jar79848J #8 x 3" Black Finish Fine Thread drywall screws, bugle head, phillips 100/Jar

FrostFrost


E

SCREWS, NUTS & WASHERSDrywall Screws

Coarse Thread - Sharp PointPhillips Head

Drywall ScrewsPartNumber Size Color Description Buy PkgCS158 #6 x 1-5/8" Black Finish Coarse Thread, sharp point, bugle head, phillips 5000/Box (Bulk)CS300 #8 x 3" Black Finish Coarse Thread, sharp point, bugle head, phillips 5000/Box (Bulk)

Drywall Laminator ScrewPhillips Head

Drywall ScrewsPartNumber Size Description Buy PkgLS10112 #10 x 1-1/2" Laminating drywall screw, temporary drywall/drywall or drywall/wood,

phillips bugle head 5000/Box (Bulk)

Concrete Masonry ScrewsTapcon - Hex Washe Head

RamsetPartNumber Size Description Buy PkgHW3-114 3/16" x 1-1/4" Concrete Screw, hex washer head, slotted 100/BoxHW4-114 1/4" x 1-1/4" Concrete Screw, hex washer head, slotted 100/Box

FrostFrost


E

SCREWS, NUTS & WASHERSHex Head Cap Screws

Hex Head Machine Bolt - Grade 2

CullyPartNumber Size Description Buy Pkg55008J 1/4"-20 x 1/2" Grade 2 Hex machine bolt, carbon steel, zinc plated, fully threaded 100/Jar55012J 1/4"-20" x 3/4" Grade 2 Hex machine bolt, carbon steel, zinc plated, fully threaded 100/Jar55016J 1/4"-20 x 1" Grade 2 Hex machine bolt, carbon steel, zinc plated, fully threaded 100/Jar55020J 1/4"-20 x 1-1/4" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55024J 1/4"-20 x 1-1/2" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55032J 1/4"-20 x 2" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55416J 3/8"-16 x 1" Grade 2 Hex machine bolt, carbon steel, zinc plated, fully threaded 100/Jar55420J 3/8"-16 x 1-1/4" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55424J 3/8"-16 x 1-1/2" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55432J 3/8"-16 x 2" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55816J 1/2"-13 x 1" Grade 2 Hex machine bolt, carbon steel, zinc plated, fully threaded 100/Jar55820J 1/2"-13 x 1-1/4" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar55832J 1/2"-13 x 2" Grade 2 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar

Hex Head Machine Bolt - Grade 5

CullyPartNumber Size Description Buy Pkg55821J 1/2"-13 X 1-1/4" Grade 5 Hex machine bolt, carbon steel, zinc plated, partial thread 100/Jar

FrostFrost


E


Stainless Steel Hex Head Machine Bolt

CullyPartNumber Size Description Buy Pkg74216 1/4"-20 x 1" 18-8 Stainless steel, hex head cap screw (machine bolt) 100/Box74224 1/4"-20 x 1-1/2" 18-8 Stainless steel, hex head cap screw (machine bolt) 100/Box74232 1/4"-20 x 2" 18-8 Stainless steel, hex head cap screw (machine bolt) 100/Box74416 3/8"-16 x 1" 18-8 Stainless steel, hex head cap screw (machine bolt) 100/Box74424 3/8"-16 X 1-1/2" 18-8 Stainless steel, hex head cap screw (machine bolt) 100/Box74432 3/8"-16 x 2" 18-8 Stainless steel, hex head cap screw (machine bolt) 100/Box74624 1/2"-13 x 1-1/2" 18-8 Stainless steel, hex head cap screw (machine bolt) 50/Box74632 1/2"-13 x 2" 18-8 Stainless steel, hex head cap screw (machine bolt) 50/Box

Powers FastenersPartNumber Size Description Buy Pkg801005 1/4"-20 X 1" Stainless Steel hex machine bolt 100/Box801006 1/4"-20 X 1-1/4" Stainless Steel hex machine bolt 100/Box801007 1/4"-20 X 1-1/2" Stainless Steel hex machine bolt 100/Box801009 1/4"-20 X 2" Stainless Steel hex machine bolt 100/Box801011 1/4"-20 X 2-1/2" Stainless Steel hex machine bolt 100/Box801032 5/16"-18 X 1" Stainless Steel hex machine bolt 100/Box801033 5/16"-18 X 1-1/4" Stainless Steel hex machine bolt 100/Box801034 5/16"-18 X 1-1/2" Stainless Steel hex machine bolt 100/Box801036 5/16"-18 X 2" Stainless Steel hex machine bolt 100/Box801057 3/8"-16 X 1" Stainless Steel hex machine bolt 100/Box801059 3/8"-16 X 1-1/2" Stainless Steel hex machine bolt 100/Box801061 3/8"-16 X 2" Stainless Steel hex machine bolt 100/Box801103 1/2"-13X 1" Stainless Steel hex machine bolt 50/Box801105 1/2"-13X 1-1/2" Stainless Steel hex machine bolt 50/Box801107 1/2"-13 X 2" Stainless Steel hex machine bolt 50/Box

FrostFrost


E


Stainless Steel Hex Head Machine Bolt

Hex Cap ScrewPartNumber Size Description Buy PkgHCS142012SS 1/4"-20 X 1/2" Stainless Steel hex head cap screw 100/BoxHCS142034SS 1/4"20 X 3/4" Stainless Steel hex head cap screw 100/BoxHCS14201SS 1/4"-20 X 1" Stainless Steel hex head cap screw 100/BoxHCS1420114SS 1/4"-20 X 1-1/4" Stainless Steel hex head cap screw 100/BoxHCS1420112SS 1/4"-20 X 1-1/2" Stainless Steel hex head cap screw 100/BoxHCS14202SS 1/4"-20 X 2" Stainless Steel hex head cap screw 100/BoxHCS381612SS 3/8"-16 X 1/2" Stainless Steel hex head cap screw 100/BoxHCS381634SS 3/8"-16 X 3/4" Stainless Steel hex head cap screw 100/BoxHCS38161SS 3/8"-16 X 1" Stainless Steel hex head cap screw 100/BoxHCS3816114SS 3/8"-16 X 1-1/4" Stainless Steel hex head cap screw 100/BoxHCS3816112SS 3/8"-16 X 1-1/2" Stainless Steel hex head cap screw 100/BoxHCS38162SS 3/8"-16 X 2" Stainless Steel hex head cap screw 100/BoxHCS121312SS 1/2"-13 X 1/2" Stainless Steel hex head cap screw 100/BoxHCS121334SS 1/2"-13 X 3/4" Stainless Steel hex head cap screw 100/BoxHCS12131SS 1/2"-13 X 1" Stainless Steel hex head cap screw 100/BoxHCS1213114SS 1/2"-13 X 1-1/4" Stainless Steel hex head cap screw 100/BoxHCS1213112SS 1/2"-13 X 1-1/2" Stainless Steel hex head cap screw 100/BoxHCS12132SS 1/2"-13 X 2" Stainless Steel hex head cap screw 100/Box

BULK - Cap Screws/Tap Bolts/Hex BoltsCap Screws - Grade 2

SAE J429PorteousPartNumber Size Description Buy Pkg00020-2508-021 5/16"-18 x 1/2" Grade 2 tap screw, National coarse zinc, bluish/white color plating w/

sheen 1 /3100 Bulk00020-2512-021 5/16"-18 x 3/4" Grade 2 tap screw, National coarse zinc, bluish/white color plating w/

sheen 1 /2600 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSBULK - Cap Screws/Tap Bolts/Hex Bolts

Tap Bolts - Grade AASTM A307

PorteousPartNumber Size Description Buy Pkg00022-2416-021 1/4"-20 x 1" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /3600 Bulk00022-2418-021 1/4"-20 x 1-1/4" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /2800 Bulk00022-2420-021 1/4"-20 x 1-1/2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /2400 Bulk00022-2424-021 1/4"-20 x 2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1600 Bulk00022-2516-021 5/16"-18 x 1" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /2200 Bulk00022-2518-021 5/16"-18 x 1-1/4" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1800 Bulk00022-2520-021 5/16"-18 x 1-1/2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1600 Bulk00022-2524-021 5/16"-18 x 2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1200 Bulk00022-2616-021 3/8"-16 x 1" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1500 Bulk00022-2618-021 3/8"-16 x 1-1/4" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1300 Bulk00022-2620-021 3/8"-16 x 1-1/2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /1000 Bulk00022-2624-021 3/8"-16 x 2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /800 Bulk00022-2816-021 1/2"-13 x 1" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /750 Bulk00022-2818-021 1/2"-13 x 1-1/4" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /650 Bulk00022-2820-021 1/2"-13 x 1-1/2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /600 Bulk00022-2824-021 1/2"-13 x 2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /450 Bulk00022-2825-021 1/2"-13 x 2-1/4" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /400 Bulk00022-2826-021 1/2"-13 x 2-1/2" Grade A tap screw, zinc blue, bluish color plating w/ sheen 1 /325 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSBULK - Cap Screws/Tap Bolts/Hex Bolts

Hex Bolts - Grade AASTM A307

PorteousPartNumber Size Description Buy Pkg00024-2408-021 1/4"-20 x 1/2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /5000 Bulk00024-2412-021 1/4"-20 x 3/4" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /3500 Bulk00024-2608-021 3/8"-16 x 1/2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /2100 Bulk00024-2612-021 3/8"-16 x 3/4" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /1800 Bulk00024-2812-021 1/2"-13 x 3/4" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /900 Bulk00024-3024-021 5/8"-11 x 2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /250 Bulk00024-3026-021 5/8"-11 x 2-1/2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /200 Bulk00024-3030-021 5/8"-11 x 3" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /175 Bulk00024-3032-021 5/8"-11 x 3-1/2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /150 Bulk00024-3224-021 3/4"-10 x 2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /180 Bulk00024-3225-021 3/4"-10 x 2-1/4" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /150 Bulk00024-3226-021 3/4"-10 x 2-1/2" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /140 Bulk00024-3230-021 3/4"-10 x 3" Grade A hex bolt, full body, rolled threads, hot dip galvanized 1 /120 Bulk

BULK - Carriage BoltsCarriage Bolts - Grade A

ASTM A307

PorteousPartNumber Size Description Buy Pkg00100-2616-021 3/8"-16 x 1" Carriage bolt, round head/square neck, rolled threads,hot dip galv., zinc

plating 1/4200 Bulk00100-2618-021 3/8"-16 x 1-1/4" Carriage bolt, round head/square neck, rolled threads,hot dip galv., zinc

plating 1/3000 Bulk00100-2650-021 3/8"-16 x 5" Carriage bolt, round head/square neck, rolled threads,hot dip galv., zinc

plating 1/250 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSHex Head Lag Screws

Lag Screws - Hex Head

CullyPartNumber Size Description Buy Pkg57024J 1/4" x 1-1/2" Hex lag bolts/screws, zinc plated 100/Jar57032J 1/4" x 2" Hex lag bolts/screws, zinc plated 100/Jar57040J 1/4" x 2-1/2" Hex lag bolts/screws, zinc plated 100/Jar57048J 1/4" x 3" Hex lag bolts/screws, zinc plated 100/Jar57432J 3/8" x 2" Hex lag bolts/screws, zinc plated 100/Jar57440J 3/8" x 2-1/2" Hex lag bolts/screws, zinc plated 100/Jar57448J 3/8" x 3" Hex lag bolts/screws, zinc plated 100/Jar

BULK - Hex Lag ScrewsLag Screws - Hex Head

Grade 1 - SAE J429

PorteousPartNumber Size Description Buy Pkg00110-2416-021 1/4" x 1" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/3500 Bulk00110-2418-021 1/4" x 1-1/4" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/2800 Bulk00110-2420-021 1/4" x 1-1/2" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/2400 Bulk00110-2424-021 1/4" x 2" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/1600 Bulk00110-2430-021 1/4" x 3" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/900 Bulk00110-2518-021 5/16" x 1-1/4" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/1200 Bulk00110-2520-021 5/16" x 1-1/2" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/1600 Bulk00110-2524-021 5/16" x 2" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/1200 Bulk00110-2616-021 3/8" x 1" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/1500 Bulk00110-2618-021 3/8" x 1-1/4" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/1300 Bulk00110-2624-021 3/8" x 2" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/800 Bulk00110-2630-021 3/8" x 3" Hex lag bolts/screws, zinc plated, hot dip galvanized, zinc plated 1/500 Bulk

FrostFrost


E

SCREWS, NUTS & WASHERSHexagon Steel Machine Screw Nuts

Hex NutsZinc

CullyPartNumber Size Description Buy Pkg40105J 6-32 Hex nuts, zinc 100/Jar40110J 8-32 Hex nuts, zinc 100/Jar40115J 10-24 Hex nuts, zinc 100/Jar40120J 10-32 Hex nuts, zinc 100/Jar40125J 1/4"-20 Hex nuts, zinc 100/Jar40135J 3/8"-16 Hex nuts, zinc 100/Jar40140J 1/2"-13 Hex nuts, zinc 100/Jar

Hex Nuts - Grade 5Zinc

CullyPartNumber Size Description Buy Pkg40230 5/16"-18 Grade "5" Hex Nuts, USA Zinc 100/Box

Hexagon Steel Machine Screw Nuts - Stainless SteelHex Nuts - Stainless Steel

Powers FastenersPartNumber Size Description Buy Pkg816005 1/2"-13 Stainless steel hex nut 50/Box

FrostFrost


E

SCREWS, NUTS & WASHERSBULK - Hex Nuts

Hex Nuts - Grade A FinishedASTM A563

PorteousPartNumber Size Description Buy Pkg00200-2500-021 5/16"-18 Finished hex nut, National coarse, zinc blue (bluish/white plating w/ sheen) 1/6000 Bulk00200-2600-021 3/8"-16 Finished hex nut, National coarse, zinc blue (bluish/white plating w/ sheen) 1/4000 Bulk00200-2800-021 1/2"-13 Finished hex nut, National coarse, zinc blue (bluish/white plating w/ sheen) 1/1800 Bulk00200-3000-021 5/8"-11 Finished hex nut, National coarse, zinc blue (bluish/white plating w/ sheen) 1/800 Bulk00200-3200-021 3/4"-10 Finished hex nut, National coarse, zinc blue (bluish/white plating w/ sheen) 1/500 Bulk

Hex Machine Screw Nut NCNational Coarse - Zinc

PorteousPartNumber Size Description Buy Pkg00220-0600-021 6-32 Hex machine screw nut, National coarse, zinc blue (bluish/white plating w/

sheen) 1/10,000 Bulk00220-0800-021 8-32 Hex machine screw nut, National coarse, zinc blue (bluish/white plating w/

sheen) 1/8000 Bulk00220-1000-021 10-24 Hex machine screw nut, National coarse, zinc blue (bluish/white plating w/

sheen) 1/8000 Bulk00220-2400-021 1/4"-20 Hex machine screw nut, National coarse, zinc blue (bluish/white plating w/

sheen) 1/4375 Bulk

FrostFrost


E


Hex Machine Screw Nut NFNational Fine - Zinc

PorteousPartNumber Size Description Buy Pkg00221-1000-021 10-32 Machine screw hex nuts, National fine zinc, blue plated 1/7500 Bulk

Reducer Coupling NutNational Coarse - Zinc

PorteousPartNumber Size Description Buy Pkg00236-2826-021 1/2"-13 x 3/8-16 Hex reducer coupling nut, converts larger size threaded rod to smaller

threaded rod, zinc blue 1/625 Bulk

Economy Coupling Nut - Grade ANational Course - Zinc

PorteousPartNumber Size Description Buy Pkg00237-2400-021 1/4"-20 x 3/8" x 7/8" Economical coupling hex nut, zinc blue 1/2500 Bulk00237-2600-021 3/8"-16 x 1/2" x 1-1/8" Economical coupling hex nut, zinc blue 1/1250 Bulk00237-2800-021 1/2"-13 x 5/8" x 1-1/4" Economy coupling hex nut, zinc blue 1/625 Bulk

FrostFrost


E


Regular Coupling Nut - Grade ANational Course - Zinc

PorteousPartNumber Size Description Buy Pkg00238-2600-021 3/8"-16 x 9/16" x 1-3/4" Regular coupling hex nut, zinc blue 1/500 Bulk00238-2800-021 1/2"-13 x 11/16" x

1-3/4" Regular coupling hex nut, zinc blue 1/400 Bulk

Eye Bolts With Hex NutsEyebolts/Nuts

CullyPartNumber Size Description Buy Pkg64140 1/4" x 2-1/2" Eyebolt with hex nut, zinc 30/Pk64164J 1/4" x 4" Eyebolt with hex nut, zinc 100/Jar64380J 3/8" x 5" Eyebolt with hex nut, zinc 100/Jar

FrostFrost


E

SCREWS, NUTS & WASHERSSteel Washers

Fender Washers - SteelZinc

Thomas & BettsPartNumber Size Diameter Description Buy Pkg55-201 1/8" Bolt 3/16" I.D. - 5/8"

O.D.Steel Zinc plated fender washer, smooth rounded edges, .062"thickness 100

55-202 1/8" Bolt 5/32" I.D. - 9/16"O.D

Steel Zinc plated fender washer, smooth rounded edges, .047"thickness 100

55-203 3/16" Bolt 13/64" I.D. - 15/32"O.D.


55-204 3/16" Bolt 7/32" I.D. - 1" O.D.


55-206 1/4" Bolt 9/32" I.D. - 5/8" O.D.


55-207 1/4" Bolt 5/16" I.D. - 7/8" O.D.


55-208P 1/4" Bolt 9/32" I.D. - 1" O.D.


55-211P 3/8" Bolt 13/32" I.D. - 1-1/4"O.D.


55-213 1/2" Bolt 17/32" I.D. - 2" O.D.


55-218P 1/4" Bolt 9/32" I.D. - 1-1/4"O.D.


Fender WashersZinc Plated Fender Washers

Fender WashersPartNumber Size Description Buy Pkg40725J 1/4" x 1-1/4" Zinc plated fender washers 100/JarFENW0380200OZ 3/8" x 2" Zinc plated fender washers 100/Box

FrostFrost


E

SCREWS, NUTS & WASHERSFender Washers

Stainless Steel Fender Washers

Fender WashersPartNumber Size Description Buy PkgWFD12112SS 1/2" X 1-1/2" Stainless steel fender washer 100/Box

Standard WashersFlat Cut Washers

CullyPartNumber Size Description Buy Pkg40310J #8 Zinc plated flat cut standard washer 100/Jar40315J #10 Zinc plated flat cut standard washer 100/Jar40325J 1/4" Zinc plated flat cut standard washer 100/Jar40330J 5/16" Zinc plated flat cut standard washer 100/Jar40335J 3/8" Zinc plated flat cut standard washer 100/Jar40340J 1/2" Zinc plated flat cut standard washer 100/Jar40345 5/8" Zinc plated flat cut standard washer 100/Box

Flat Cut Washers - Stainless

CullyPartNumber Size Description Buy Pkg70325 1/4" 18 - 8 Stainless steel flat cut standard washer 100/Box70335 3/8" 18 - 8 Stainless steel flat cut standard washer 100/Box70340 1/2" 18 - 8 Stainless steel flat cut standard washer 100/Box

FrostFrost


E

SCREWS, NUTS & WASHERSStandard Washers

Flat Washers - Stainless

CullyPartNumber Size Description Buy Pkg842002 1/4" Stainless steel flat washer 100/Box842003 5/16" Stainless steel flat washer 100/Box842004 3/8" Stainless steel flat washer 100/Box842006 1/2" Stainless steel flat washer 100/Box

Split Lock WashersZinc Plated Lock Washers

CullyPartNumber Size Description Buy Pkg40505J #6 Zinc plated split lock washer 100/Jar40510J #8 Zinc plated split lock washer 100/Jar40515J #10 Zinc plated split lock washer 100/Jar40525J 1/4" Zinc plated split lock washer 100/Jar40535J 3/8" Zinc plated split lock washer 100/Jar40540J 1/2" Zinc plated split lock washer 100/Jar

Stainless Steel Lock WashersPowers FastenersPartNumber Size Description Buy Pkg847006 1/4" Stainless steel split lock washer 100/Box847007 5/16" Stainless steel split lock washer 100/Box847008 3/8" Stainless steel split lock washer 100/Box847010 1/2" Stainless steel split lock washer 100/Box

FrostFrost


E

SCREWS, NUTS & WASHERSSplit Lock Washers

Stainless Steel Lock WasherStainless SteelPartNumber Size Description Buy PkgFESCSTAR 1/4 1/4" Stainless steel split lock washer 100/BoxFESCSTAR 3/8 3/8" Stainless steel split lock washer 100/BoxFESCSTAR 1/2 1/2" Stainless steel split lock washer 100/Box

FrostFrost


Documents

Strut Channel - Steel - Frost Electric and...E STRUT & ACCESSORIES Strut Channel - Steel "A" Deep Channel 12-Gauge, 1-5/8" x 1-5/8" Thomas & Betts PartNumber Length Finish Description