Upload
clara-bertha-wood
View
214
Download
0
Tags:
Embed Size (px)
Citation preview
Struck by an Object
Toolbox Talk 2016
What is Safety Stand Down?• Safety Stand Down is a program designed to bring
together frontline workers and senior executives to discuss the prevention of injuries and illnesses.
• 2016 focuses on three leading causes of injury in the upstream oil and gas industry, with the goal of:
Keeping “u” out of injuries
What are the Three Leading Causes of Injury?
Slips, Trips and Falls
Highway Accidents
Struck by an Object
Caught in Overexertion
Burns
Did You Guess Highway Accidents?• Most people do!
• Although injuries can be severe, they are not one of the leading three causes of injury.
The Three Leading Causes of Injury are: 1st 2nd 3rd
Struck by an Object• Today’s presentation
focuses on the #1 cause of injury - being Struck by an Object.
What are Workers Being Struck by?
Pipes
Pulleys and sheaves
Hoses
Screw drivers
Ropes
Most Common Ways to be Struck by an Object#1 - Handling pipe, resulting in arm, leg and head injuries.
#2 - Struck by pulleys and sheaves, resulting in head and leg injuries.
#3 - Struck by hoses, resulting in ankle and head injuries.
Struck by an Object - the Numbers• Struck by object is the leading cause of injuries in
Western Canada.
▫British Columbia: 1st
▫Alberta: 1st
▫Saskatchewan: 1st
Struck by an Object - the Cost• Over the last five years in the three Western provinces
struck by object accounted for:
▫~5,000 claims
▫~$22,500,000.00 of claims cost
▫~36,000 lost days Highway accidents ~1,300 claims, ~$15,000,000.00 claims cost and ~25,000 lost days
Preventing Being Struck by Pipe• Don’t rush and be aware of your surroundings
• Follow established procedures
• Don’t be in the line of fire
Preventing Being Struck by Pipe• Establish “No Go” Zones
• Secure pressurized pipes
• Ensure effective communication
Preventing Being Struck by Sheaves
• Conduct load calculations to ensure the sheave is right for the job
• Secure the sheave during transport to the elevated attachment point
• Do not stand below equipment being installed or dismantled
Preventing Being Struck by Sheaves
• Inspect sheaves for damage or wear on a regular basis
• If something doesn’t feel right stop and investigate
• See Enform’s Safety Alert, Snatch Block Sheave Fall
Preventing Being Struck by Hoses
• Ensure good communication and work handoff
• Know the position of all the valves
• Ensure connections are secure
Preventing Being Struck by Hoses
• Inspect the lines on a regular basis for leaks
• Never disconnect a line if you are unsure if it is pressurized
• Stay away from hoses when flow is initiated to avoid the kick
Injury From Being Struck by an Object - Prevention Discussion• What are we doing well to prevent these injuries?
• What could we do better?
• What additional support do you need (e.g. training, resources, equipment, etc.)?