Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
[ R e v i s e d 2 / 2 0 1 5 ]
P R O D U C T R E F E R E N C E G U I D E
Strip Light
B R I L L I A N C E L E D S T R I P L I G H T 3 G
C U T S H E E T
F I G U R E A : A C C E S S O R I E S
F I G U R E B : P A R T S & P I E C E S
F I G U R E C : PROPER HANDLING
F I G U R E D : PROPER POSITIONING OF CONNECTOR PINS
S T E P 1 : PLACE CLEAR TUBE, THEN, CLEAR CAP ON STRIP LIGHT
S T E P 2 : CONNECT END CONNECTOR TO STRIP LIGHT
S T E P 3 : PLACE METAL ANTI-SLIP PLATE
S T E P 4 : COVER WITH HEAT SHRINK TUBE & SEAL
S T E P 5 : PLACE END-CONNECTOR AND SEAL END OF STRIP
1
2
5
6
6
7
7
8
8
9
B r i l l i a n c e L E D S t r i p L i g h t 3 r d G e n e r a t i o n
Brilliance LED 3rd Generation Strip Light Dimensions:
30 cm Example without end connections
(may be cut at each 3 LED sections - 10 cm)
13.5 mm(0.531”)
30 cm
6 mm(0.236”)
BACK
✂ ✂✂ ✂
CUT MARK
Strip Light3rd Generation
Description:The Brilliance LED Strip Light is rated for outdoor use and can be directly connected to an existing 8-16 vac
landscape lighting system. Great accent lighting for stairs, railings and overhangs. The LEDs on this Strip Light are
encased in non-yellowing material that installs easily.
Special Features:- Engineered for landscape lighting systems- Power usage is 1.8w per meter- 144 Lumens / meter (45 Lumens/foot)- Operating range is 8-16 vac- 2700K Kelvin Temperature- Dimmable with most magnetic transformers- Max length for power feed is 12m (39’ 4”)- CRI: 75- 35,000 hour lamp life- IP65- 3 LED’s every 10cm ( 3.93”)- 3 year warranty- Available in 25 meter lengths
PART NUMBER : BRI SL3 2700 XX 65
LENGTH (meters)
1
Strip Light3rd Generation
FIGURE A. ACCESSORIES
2
LIGHTSHIELD
ENDCAP
HEAT SHRINKTUBE
ALUMINUMEXTRUSION
SCREW
LIGHTSTRIP
15.75 mm(0.625”)
9.5 mm(0.375”)
CLIP + SCREW
7.7 mm(0.312”)
33.6 mm(1.35”)
“T” POWERFEED
DOUBLE -SIDEDCONNECTOR
27 cm (11”)
POWER FEED
1 meter (3.2’)
JUMPERCONNECTOR
0.26 meters (10”)
1 meter (3.2’)
Strip Light3rd Generation
FIGURE A. ACCESSORIES CONTINUED
3
Bril l iance LED Strip Light Accessory:
Jumper Connector Kit
Part No. : 0 35127 47606 3Pieces:
1 - Jumper Connector
2 - Clear Plastic Retainers
2 - Metal Anti-sl ip Plates
2 - Heat-shrink Tubes
35
12
74
76
06
03
Bril l iance LED Strip Light Accessory:
Double - Sided Connector Kit
Part No. : 0 35127 47542 4Pieces:
1 - Double -Sided Connector
2 - Clear Plastic Retainers
2 - Metal Anit-Slip Plates
1 - Heat Shrink Tube
35
12
74
75
42
04
Bril l iance LED Strip Light Accessory:
Power Feed Kit
Part No. : 0 35127 47544 8Pieces:
1 - Power Feed
1 - Clear Plastic Retainer
1 - Metal Anti-sl ip Plate
1 - Heat-shrink Tube3
51
27
47
54
40
8
Bril l iance LED Strip Light Accessory:
“T” Power Feed Connector Kit
Part No. : 0 35127 47608 7Pieces:
1 - “T” Power Feed Connector
2 - Clear Plastic Retainers
2 - Metal Anti-sl ip Plates
2 - Heat-shrink Tubes
35
12
74
76
08
07
Strip Light3rd Generation
FIGURE A. ACCESSORIES CONTINUED
4
Bril l iance LED Strip Light Accessory:
End Cap Kit
Part No. : 0 35127 47607 0Pieces:
1 - End Cap
1 - Light Shield
1 - Heat-shrink Tube
35
12
74
76
07
00
Bril l iance LED Strip Light Accessory:
Extrusion Kit
Part No. : 0 35127 47611 7Pieces:
25 - 1 m (3 .2 ’ ) Extrusion sections
35
12
74
76
11
07
Bril l iance LED Strip Light Accessory:
Clip & Screw Kit
Part No. : 0 35127 47543 1Pieces:
50 - Plastic Clips
100 - Screws
35
12
74
75
43
01
5
Strip Light3rd Generation
FIGURE B. PARTS & PIECES
LIGHTSTRIP
LIGHTSTRIP
LIGHTSHIELD
HEATSHRINK TUBE
CLEAR PLASTICRETAINER
METALANTI-SLIP
PLATE
END CAP
POWER FEED(NOTCH)
NOT INCLUDED :
HEAT SOURCE FOR HEAT SHRINK TUBE SEAL
6
FIGURE D. PROPER POSITIONING OF CONNECTOR PINS
DO NOT TWIST
CONNECTOR PINS
PCB
LED
LIGHT SURFACE
DO NOT INSERT CONNECTOR PINS
ON LEDS SIDE
FIGURE C. PROPER HANDLING
Strip Light3rd Generation
Strip Light3rd Generation
(NOTCH)
(NOTCH)
STEP 1 . PLACE HEAT SHRINK TUBE & CLEAR RETAINER ON STRIP LIGHT
7
DO NOT insert connector pins on LEDs side!
(SEE FIGURE D)
STEP 2. CONNECT POWER FEED TO STRIP LIGHT
STEP 4. COVER WITH HEAT SHRINK TUBE & SEAL WITH HEAT GUN
Strip Light3rd Generation
STEP 3. PLACE METAL ANTI-SLIP PLATE & SLIDE CLEAR RETAINER OVER
8
Strip Light3rd Generation
STEP 5. PLACE END-CONNECTOR AND SEAL END OF STRIP
9
GET SUPPORT!BRILLIANCELED.COM
800- 867-2108
7 2 0 2 E a s t C a v e C r e e k R o a d , S u i t e 3 A | P. O . B o x 2 2 8 1 | C a r e f r e e , A Z 8 5 3 7 7
T. 800.867.2108 | F. 480.575.0078 | B r i l l i anceLED.com | Orders@Br i l l i anceLED.com
© 2015 Brilliance LED, LLC. All Rights Reserved. Product images are for illustration purposes only.
The information contained herein is designed to be as comprehensive and factual as possible. All product
sizes are nominal. Actual products may vary from their respective descriptions. All products, product
speci�cations and data are subject to change without notice to improve reliability, function, design or
otherwise. The colors and the designs reproduced in this publication have been matched as closely as the
printing process allows. All text, images, graphics and other materials on this publication are subject to the
copyright and other intellectual property rights of Brilliance LED, LLC. These materials may not be
reproduced, distributed, modi�ed or reposted without the express written permission of Brilliance LED, LLC.