Upload
others
View
19
Download
0
Embed Size (px)
Citation preview
Stretch Blow Molding Machine
Description
Semi-automatic stretch blowing machine is designed according to CE standards. With microcomputer controlling system, it controls various technical parameters more accurately and more steadily. Only one worker can operate it. It is suitable to blow carbonated beverage bottles, mineral water bottles, cosmetic bottles, and hot-filling bottles.
Technical Parameters
Item NO. JND-CP-880
Clamping Force 20T
Material PET
Power (Kw) 12Kw
Clamping Stroke 230mm
Max. Stretching Stroke 380mm
Number of Cavities 2 Cavity
Theoretical Output 0.1-2.5L:880BPH; 3.6L:380BPH
Max. Mold Thickness 300mm
Space Between Tie Bars 380x500mm
Voltage Standard AC 380V/50Hz
Number of Heating Zones 2 Sections
Total Power (Fully Loaded) 6kw
Max. Bottle Volume 0.1-2.5L (2cav); 3-6L (1cav)
Neck Diameter Range 15-60mm
Max. Container Diameter 35-220mm
Max. Container Height 450mm
Low Air Compressor 8-10 Bar
High Air Compressor 30 Bar
Air Dryer 2.0/30
Blow Molding Machine 1,480x600x2,130mm
Net Weight 0.82 Ton
Model JND-E1000 JND-E2000 JND-E3000 JND-E4000 JND-E6000
Clamping Force 150KN 180KN 250KN 370KN 5650KN
Clamping Stroke 80-120mm 80-120mm 80-120mm 80-120mm 80-120mm
Max. Stretching Stroke 370mm 370mm 370mm 370mm 370mm
Bottom Moving Stroke 70mm 70mm 70mm 70mm 70mm
Number of Cavities 1 Cavity 2 Cavity 3 Cavity 4 Cavity 6 Cavity
Theoretical Output 1,300BPH 2,500BPH 3,200BPH 4,000BPH 5,500BPH
Theoretical Output 250mm 250mm 250mm 250mm 250mm
Max. Mold Thickness
300mm 300mm 300mm 300mm 300mm
Low Air Compressor
8-10 Bar 8-10 Bar 8-10 Bar 8-10 Bar 8-10 Bar
Total Power 20KW 28KW 28KW 28KW 60KW
Voltage Standard 380v/3PH/50Hz or special order
Max. Container Volume
2.5L 2.5L 2.5L 2.5L 2.5L
High Air Compressor
30-40 Bar 30-40 Bar 30-40 Bar 30-40 Bar 30-40 Bar
Low Air Compressor
10 Bar 10 Bar 10 Bar 10 Bar 10 Bar
Blow Molding Machine
180x150x180cm 210x150x180cm 220x150x180cm 250x150x180cm 360x200x180cm
Preform Autoloader
100x80x200cm 110x90x220cm 110x120x220cm 110x120x220cm 110x120x220cm
Net Weight 1.8 Ton 2.0 Ton 2.5 Ton 3.5 Ton 4.0 Ton
Automatic Stretch Blow Molding Machine JND-E series
Description
Automatic bottle blowing machine is mainly used for PET and PP plastic bottles. This machine is very economic combined with many years of experience on the blowing machine. The optimized design and patented preform heating system reduces the area and energy consumption, meanwhile, this series blow molding machine equipped with advanced international pressure compensating device to ensure that the final quality of the plastic bottle. E series automatic blow molding machines with low investment, high efficiency, have good compatibility for different specifications of bottles.
Technical Parameters
Model JND-E1000 JND-E2000 JND-E3000 JND-E4000 JND-E6000
Clamping Force 150KN 180KN 250KN 370KN 5650KN
Clamping Stroke 80-120mm 80-120mm 80-120mm 80-120mm 80-120mm
Max. Stretching Stroke 370mm 370mm 370mm 370mm 370mm
Bottom Moving Stroke 70mm 70mm 70mm 70mm 70mm
Number of Cavities 1 Cavity 2 Cavity 3 Cavity 4 Cavity 6 Cavity
Theoretical Output 1,300BPH 2,500BPH 3,200BPH 4,000BPH 5,500BPH
Theoretical Output 250mm 250mm 250mm 250mm 250mm
Max. Mold Thickness 300mm 300mm 300mm 300mm 300mm
Low Air Compressor 8-10 Bar 8-10 Bar 8-10 Bar 8-10 Bar 8-10 Bar
Total Power 20KW 28KW 28KW 28KW 60KW
Voltage Standard 380v/3PH/50Hz or special order
Max. Container Volume 2.5L 2.5L 2.5L 2.5L 2.5L
High Air Compressor 30-40 Bar 30-40 Bar 30-40 Bar 30-40 Bar 30-40 Bar
Low Air Compressor 10 Bar 10 Bar 10 Bar 10 Bar 10 Bar
Blow Molding Machine 180x150x180cm
210x150x180cm
220x150x180cm
250x150x180cm
360x200x180cm
Preform Autoloader 100x80x200cm 110x90x220cm 110x120x220c
m110x120x220c
m110x120x220c
m
Net Weight 1.8 Ton 2.0 Ton 2.5 Ton 3.5 Ton 4.0 Ton
Automatic Bottle Blow Molding Machine JND-CPSS
Description
JND-CP-SS Series This blower is our lowest cost system with the benefits of automatic operation, from sorting, feeding the preforms, stretch blowing of bottles, and delivery of the finished product. This automatic linear PET blow molding machine is designed with two principles in mind. One, to lower the running cost for the bottle producer, and provide easy operation.The JND-CP-SS Series PET blow molding machine lowers your production costs so you can achieve maximum profit in your competitive bottling market. Reducing your energy expenses by up to 30% at a maximum output of 1,500BPH for the signalcavity machine.
Features
1. Full automatic running with theoretical output capacity up to 4,500 bottles per hour for 0.1L volume using four cavity blow mold.
2. Patented loading system carries the preform automatically with less moving parts.
3. Suitable to produce 01-2.5L standard neck PET container.
4. Advanced PLC control system with a user friendly control panel.
5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
6. Multiple reliable sensor systems monitor the machine's automatic function.
7. Equipped with special designed air storage unit.
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. Cooling system that provides a perfect cooling result.
10.Compact design that saves space.
11.Simple installation and startup operation.
12.Minimal transfer space for the air distribution system.
Technical Parameters
Model JND-CP-SS1500 JND-CP-SS2600 JND-CP-SS3500 JND-CP-SS4500
Clamping Force 14T 25T 31T 34T
Clamping Stroke 150mm 150mm 150mm 150mm
Max. Stretching Stroke 370mm 370mm 370mm 370mm
Bottom Moving Stroke 70mm 70mm 70mm 70mm
Number of Cavities 1 Cavity 2 Cavity 3 Cavity 4 Cavity
Theoretical Output 1,600BPH 2,500BPH 3,500BPH 4,500BPH
Theoretical Output 250mm 250mm 250mm 250mm
Max. Mold Thickness 300mm 300mm 300mm 300mm
Low Air Compressor 8-10 Bar 8-10 Bar 8-10 Bar 8-10 Bar
Total Power 20KW 28KW 28KW 60KW
Voltage Standard 380v/3PH/50Hz or special order
Max. Container Volume 2.5L 2.5L 2.5L 2.5L
High Air Compressor 30 Bar 30 Bar 30 Bar 30 Bar
Air Dryer 2.0/30 3.0/30 3.0/30 6.0/30
Blow Molding Machine 180x160x200cm 200x180x220cm 215x230x220cm 215x250x230cm
Preform Autoloader 140x105x200cm 150x120x250cm 150x120x250cm 150x120x250cm
Net Weight 2.6 Ton 3.8 Ton 4.5 Ton 6 Ton
5 Gallon Stretch Blow Molding Machine
Features
1. Special design for PET Gallon Bottles up to 6 Gallon.
2. Produce wide mouth bottle up to 25 liters with neck size up to 200mm.
3. Uses infrared reheat units to achieve uniform heating throughout the wall of preform.
4. Adopts special designed preform heating system to ensure the optimal heating effect for 740g thick-preform.
5. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
6. Water cooling system ensures the quality of preform neck.
7. Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle.
8. Use advanced PLC control system with counting function and time-control precision to 0.01 seconds and a user-friendly panel.
9. Equipped with specially designed air storage units.
10.Simple installation and startup adjustments.
Technical Parameters
Model Item Unit JND-CP-90
Container
Product material / PET/PC/PE
Container volume L 5-6 (2-cavity) 10-25 (1-cavity)
Theoretic output Pcs/hr 5gallon: 90 5L: 400
Preform inner diameter mm 15-200
Molding
Max mold plate dimension (LxW) mm 420x500
Max mold thickness mm 400
Clamping force KN 100
Mold opening stroke mm 330
Air Compressor
High pressure compressor m3/Mpa KW ≥0.60/3.0
Air pressure for blowing Mpa 2.0-3.0
Low pressure compressor m3/Mpa KW ≥0.8/1.25 7.5
Main Machine ElectricityPower M 15
Voltage/frequency V/Hz 380-240-110/50-60 (3phase)
Machine Size and Weight
Main machine M 1.55x0.82x2.00
Main machine weight T 1
Heater (LxWxH) M 2.42x0.65x1.60
Heater weight T 0.38
High pressure compressor(LxWxH)
M 1.90x0.75x1.50
Air filter Kg 10x2pcs
Safety Auto emergency alarm Safety inter-locking device
SB-10 Series Single Cavity Automatic Blower
Description
We designed the drawing for the preform mould and bottle mould in coordination with clients needs. Also included is embossed design on the mould. We install the equipment according to US standards, and norms.
1. Auxiliary equipments included:
2. Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmospheric to the required pressure
3. Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger
4. Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
5. Air tank is to receive and supply air for the machine as storage.
Technical Parameters
Main Part
Pneumatic Part Valve SMC
Cylinder SMC
Electric Part PLC LG
Relay OMIRON
Note All of the electrical components adopts CE, UL, CCC approvedinternational advanced high-tech product.
Main Parameter
Model CM-A1
Productivity Depend on bottle design6000=-1,000CS/H
Product type Body Diameter≤100mm
Volume≤2L
Neck Diameter≤30mm
Mould Mould thickness 240mm
Mould size 250x240x360mm
Main machine power Electrical source power 380v/220v 50/60Hz
Power 25kw
Really use power 7kw
Air System HP air compressor (with a tank) 1.6m3/min 3.0MPa
Air tank 0.6m3 3.0MPa
Air Dryer (inside 2 air filters) 2.0m3/min 3.0MPa
Cooling 3 HP Water Chiller
(Water chiller is used to cool the machine and blow mould)
Machine size and weight Main machine dimension (LxWxH) 1,500x1,200x1,800mm
Pre-form Unscramble (LxWxH) 2,000x950x2,480mm
Main machine weight 1,500kg
Pre-form Unscramble 250kg
Resin Available / PET
Air Cooling Dryer
Air compressor Unit 1.6M3/min 30KG
Volume M3 1.6
Pressure Kg 30
Speed r/min 850
Power KW 18.5
Tank M3 0.3
Overall Dimension mm 1,810x754x1,482
Weight Kg 695
Air Storage Tank
Air storage tank Unit 1.6M3/min 30KG
Volume M3 1.6
Pressure Kg 30
Speed R/min 850
Power KW 18.5
Tank M3 0.3
Overall Dimension mm 1,810x754x1,482
Weight kg 695
Water Chiller
Model 3HP
4.4/38°C Cooling capacity (Kcal/h) 7,580
Compressor All-closed vorticity
Compressor power (KW) 2.5
Refrigerant R22
Chilled water pump power (KW) 0.75
10°C Max. Flow rate of chilled water (L/min) 55
Flow water inlet and outlet pipe 1”
Condensing water rate L/min≥36
Chilled water inlet and outlet pipe1”
Exterior dimension Length (mm) 850
Width (mm) 560
Height (mm) 870
Water tank capacity L 38
Weight Kg 180
Settings1. PLC display: LG(Korea) or Mitsubishi(Japan)2. Pneumatic and valve parts: SMC(Japan)3. Operating system: LG (KOREA)4. Relay:OMRON (Germany)5. Infrared thermometer: RAYTEK (USA)6. Neumatics Festo (USA)
Machine Features1. Reasonable design, full automatically control, save power and labor.2. Feeding system carries the preforms by robot arms automatically.3. Infrared oven heater adopts the quartz lamp to heat the PET tube.4. Fully automatic process with low investment, high efficiency, quick and safe for operation, easy for maintenance. 5. We have perfect service after sales.6. Adopting high quality components.
Configurations
Items Brand Origin
Air-break switch Mitsubishi Japan
Air-break switch contactor Siemens USA
Minitype breaker Siemens USA
relay OMRON Germany
Thermal overload reply Zhengtai China
Option switch Schneider France
Green directive button Schneider USA
Emergency stop switch Schneider USA
Normally open contact Schneider USA
Normally closed contact Schneider USA
Photoelectric switch OMRON Germany
Travel switch OMRON Germany
Proximity switch OMRON Germany
Photoelectric switch OMRON Germany
transducer FULIN China
Touch screen LG Korea
PLC LG Korea