Stren Flex Wire Rope Catalog

8/13/2019 Stren Flex Wire Rope Catalog

http://slidepdf.com/reader/full/stren-flex-wire-rope-catalog 1/28

WIRE ROPE AND CHAIN

ph: 877.STREN-FLEX (877.787.3635)

www.stren-flex.com

STREN FLEX®

STRENGTH FLEXIBILITY N LIFTING




http://slidepdf.com/reader/full/stren-flex-wire-rope-catalog 3/28stren-flex.com

Stren-Flex®

6295 McDonough Drive

Norcross, GA 30093

toll free: 877.STREN-FLEX

(877.787.3635)

fax: 800.628.3648

fax: 770.441.0326

Warning 2

Wire Rope Basics 4

Wire Rope — 6 x 19 Class 5

Wire Rope — 6 x 37 Class 6

Wire Rope — Aircraft Cable, Rotation Resistant 7

Wire Rope Sling Basics 8

Single Leg Wire Rope Slings 9

Multiple Leg Wire Rope Bridle Slings & Thimbles 10

Rigging Hooks 11

Hoist Cable & Winch Lines 12

Wire Rope Clips 13

Shackles 14

Turnbuckles 15

Snatch Blocks 16

Carbon Chain G43, G70 17

Carbon Chain Attachments: G43, G70 18

Load Binders 19

Alloy Chain: G80, G100 20

Alloy Chain Slings 21

Alloy Chain Attachments: G80 22

Wire Mesh Slings 25

OSHA & ASME Reference 26

Inspection Reference 27

CAUTIONAll capacities, dimensions, and other information in this catalog are subject to change withou

notice. Use for preliminary reference only.

SATISFACTION GUARANTEEIf you are not satisfied with any normally stocked Stren-Flex® product, you may return

for a full refund or credit at any time within 10 days following shipment. All items must be

returned prepaid, and a return goods authorization number must be issued from the factor

and included with the return. Returned items must be complete, undamaged, and in ne

condition. Special order items are not covered by the satisfaction guarantee and are subjecto a restocking fee.



General Wire Rope ConstructionWire rope is a machine composed of a number of precise, moving parts, designed and manufactured to bear a very definit

relation to one another. In fact, some wire ropes contain more moving parts than many complicated mechanisms. For exampl

a 6-strand rope with 49-wire strands laid around an independent wire rope core contains a total of 343 individual wires. A

of these wires must work together and move with respect to one another if the rope is to have the flexibility necessary fo

successful operation.

The Modified X-chartThe two factors governing most decisions in selecting wire rope

are abrasion resistance and resistance to bending fatigue. A

graphic presentation of the balance between these properties

has traditionally been given by means of the X-chart. However,

new designs of wire rope, such as 6-Pac and Triple-Pac, do not

follow the X-chart model as they are designed to provide both

abrasion resistance and resistance to bending fatigue.

To read the Modified X-chart, the position of each rope

construction must be considered in relation to both the X and Y

axes, or Abrasion Resistance and Resistance to Bending Fatigue,

respectively. For example, the construction 6 x 41 (6 x 49) is inthe lower right quadrant, ranking high on the bending fatigue

scale. However, its position in abrasion resistance is very low.

Therefore, it can be said that a 6 x 41 (6 x 49) construction offers excellent resistance to bending fatigue, but poor resistanc

to abrasion. At the other end of the spectrum is a 6 x 7 construction, located in the upper right quadrant of the chart. A 6 x

offers excellent abrasion resistance, but very poor resistance to bending fatigue.

Wire Rope ConstructionWire rope is composed of wires, strands, a core and lubrication. The

basic unit of wire rope is wire, which is carefully processed and drawn

from selected grades of steel to predetermined physical properties

and sizes. A predetermined number of finished wires is then helically

laid together in a uniform geometric pattern to form a strand. This

process must be performed with precision and exactness to form

a strand of correct size and characteristics. The required number

of suitably fabricated strands are laid symmetrically with a definite

length of lay around a core, forming the finished wire rope.

Wire Rope Construction Terminology Wire rope is identified by its construction, or the number of strands per rope, and number of wires in each strand. For exampl

the construction 6 x 25 denotes a 6-strand rope, with each strand having 25 wires. Constructions having similar weights an

breaking strengths are grouped into wire rope classifications, such as the 6 x 19 and 6 x 37 Classes.

Strand

Core

Wire

Wire Rope

WIRE ROPE BASICS



6 x 19 Warrington

with Fiber Core

6 x 19 Seale with IWRC 6 x 25 Fil ler Wire

with IWRC

6 x 26 Warrington

Seale with IWRC

6 x 19 Class Wire Rope

Strands: 6

Wires per Strand: 19 to 26

Core: IWRC or fiber core

Standard Grade: Extra Improved (EIP)

Lay: Regular or Lang

Finish: Bright or Galvanized

The 6 x 19 Classification of wire rope is widely used. 6 x 19 Class wire rope is suited to the

specific needs of diverse kinds of machinery and equipment due to its wear resistance and

flexibility. 6 x 19 Seale construction, with its large outer wires, provides greater resistance to

abrasion and crushing. However, its resistance to fatigue is somewhat less than that offered

by a 6 x 25 construction. The 6 x 25 possesses the best combination of flexibility and wear

resistance in the 6 x 19 Class due to the filler wires providing support and imparting stability

to the strand. The 6 x 26 Warrington Seale construction has a high resistance to crushing.

This construction is a good choice where the user needs the wear resistance of a 6 x 19

Class Rope and the flexibility midway between a 6 x 19 Class and 6 x 37 Class rope.

WIRE ROPE — 6 X 19 CLASS

RopeDiameter

inches mm Fiber Core

Fiber CoreIWRC

IWRC

NominalBreaking Strength


NominalBreaking Strength Part #Part #Part #

Approx. Weight(lb/ft)

Nominal Strength* — Tons (bright or drawn galvanized**)

EEIP IWRCEIP

04619EEIPIWRC

05619EEIPIWRC

06619EEIPIWRC

07619EEIPIWRC

08619EEIPIWRC

09619EEIPIWRC

10619EEIPIWRC

12619EEIPIWRC

14619EEIPIWRC

16619EEIPIWRC

18619EEIPIWRC

20619EEIPIWRC

22619EEIPIWRC

24619EEIPIWRC

26619EEIPIWRC

28619EEIPIWRC

30619EEIPIWRC

32619EEIPIWRC

04619EIPIWRC

05619EIPIWRC

06619EIPIWRC

07619EIPIWRC

08619EIPIWRC

09619EIPIWRC

10619EIPIWRC

12619EIPIWRC

14619EIPIWRC

16619EIPIWRC

18619EIPIWRC

20619EIPIWRC

22619EIPIWRC

24619EIPIWRC

26619EIPIWRC

28619EIPIWRC

30619EIPIWRC

32619EIPIWRC

04619EIPFC

05619EIPFC

06619EIPFC

07619EIPFC

08619EIPFC

09619EIPFC

10619EIPFC

12619EIPFC

14619EIPFC

16619EIPFC

18619EIPFC

20619EIPFC

22619EIPFC

24619EIPFC

26619EIPFC

28619EIPFC

30619EIPFC

32619EIPFC

6.5

8.0

9.5

11.0

13.0

14.5

16.0

19.0

22.0

26.0

29.0

32.0

35.0

38.0

42.0

45.0

48.0

52.0

0.105

0.164

0.236

0.32

0.42

0.53

0.60

0.95

1.29

1.68

2.13

2.63

3.18

3.78

4.44

5.15

5.91

6.72

0.116

0.18

0.26

0.35

0.46

0.59

0.72

1.04

1.42

1.85

2.34

2.89

3.50

4.16

4.88

5.67

6.50

7.39

3.74

5.80

8.31

11.20

14.60

18.50

22.70

32.30

43.80

56.90

71.50

87.90

106.00

125.00

146.00

169.00

192.00

217.00

3.02

4.69

6.71

9.09

11.80

14.90

18.30

26.20

35.40

46.00

57.90

71.00

85.40

101.00

118.00

136.00

155.00

176.00

3.40

5.27

7.55

10.20

13.30

16.80

20.60

29.40

39.80

51.70

65.00

79.90

96.00

114.00

132.00

153.00

174.00

198.00

SPECIFICATIONS — 6 x 19 CLASS WIRE ROPE

* Acceptance strength is not less than 2½% below the nominal strengths listed.

** Galvanizing: for Class A galvanized wire rope (EIP grade only), deduct 10% from the nominal strength shown.

6 x 19 Class6 x 19 Seale

6 x 19 Warrington

6 x 21 Filler Wire Type U

6 x 21 Seale

6 x 25 Filler Wire Type W

6 x 25 Seale

6 x 26 Warrington Seale

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-5/8

1-3/4

1-7/8

2




with IWRC


with IWRC

6 x 49 Filler Wire Sea

with IWRC

stren-flex.com

04637EIPIWRC

05637EIPIWRC

06637EIPIWRC

07637EIPIWRC

08637EIPIWRC

09637EIPIWRC

10637EIPIWRC

12637EIPIWRC

14637EIPIWRC

16637EIPIWRC

18637EIPIWRC

20637EIPIWRC

22637EIPIWRC

24637EIPIWRC

26637EIPIWRC

28637EIPIWRC

30637EIPIWRC

32637EIPIWRC

WIRE ROPE — 6 X 37 CLASS

6 x 37 Class Wire Rope

Strands: 6


Core: IWRC or Fiber Core


Lay: Regular or Lang

Finish: Bright or Galvanized

The 6 x 37 Class of wire rope is characterized by the relatively

large number of wires used in each strand. Ropes of this class

are among the most flexible available due to the greater number

of wires per strand, however their resistance to abrasion is less

than ropes in the 6 x 19 Class.

inches mm Fiber CorIWRCPart #Part #

04637EEIPIWRC

05637EEIPIWRC

06637EEIPIWRC

07637EEIPIWRC

08637EEIPIWRC

09637EEIPIWRC

10637EEIPIWRC

12637EEIPIWRC

14637EEIPIWRC

16637EEIPIWRC

18637EEIPIWRC

20637EEIPIWRC

22637EEIPIWRC

24637EEIPIWRC

26637EEIPIWRC

28637EEIPIWRC

30637EEIPIWRC

32637EEIPIWRC

04637EIPFC

05637EIPFC

06637EIPFC

07637EIPFC

08637EIPFC

09637EIPFC

10637EIPFC

12637EIPFC

14637EIPFC

16637EIPFC

18637EIPFC

20637EIPFC

22637EIPFC

24637EIPFC

26637EIPFC

28637EIPFC

30637EIPFC

32637EIPFC

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-5/8

1-3/4

1-7/8

2

6.5

8.0

9.5

11.0

13.0

14.5

16.0

19.0

22.0

26.0

29.0

32.0

35.0

38.0

42.0

45.0

48.0

52.0

0.105

0.164

0.236

0.32

0.42

0.53

0.60

0.95

1.29

1.68

2.13

2.63

3.18

3.78

4.44

5.15

5.91

6.72

0.116

0.18

0.26

0.35

0.46

0.59

0.72

1.04

1.42

1.85

2.34

2.89

3.50

4.16

4.88

5.67

6.50

7.39

3.74

5.80

8.31

11.20

14.60

18.50

22.70

32.30

43.80

56.90

71.50

87.90

106.00

125.00

146.00

169.00

192.00

217.00

3.02

4.69

6.71

9.09

11.80

14.90

18.30

26.20

35.40

46.00

57.90

71.00

85.40

101.00

118.00

136.00

155.00

176.00

3.40

5.27

7.55

10.20

13.30

16.80

20.60

29.40

39.80

51.70

65.00

79.90

96.00

114.00

132.00

153.00

174.00

198.00

SPECIFICATIONS — 6 x 37 CLASS WIRE ROPE

* Acceptance strength is not less than 2½% below the nominal strengths listed.

** Galvanizing: for Class A galvanized wire rope (EIP grade only), deduct 10% from the nominal strength shown.

6 x 37 Class6 x 31 Warrington Seale




6 x 43 Filler Wire Seale

6 x 49 Filler Wire Seale

RopeDiameter

Fiber CoreIWRC



Approx. Weight(lb/ft)

Nominal Strength* — Tons (bright or drawn galvanized**)

EEIP IWRCEIP

Part #




7 x 7 7 x 19

WIRE ROPE — AIRCRAFT CABLE, ROTATION RESISTANT

Strands: 19

Wires per Strand: 7

Core: WSC

19 x 7 is recommended for hoisting unguided loads with a single-part

line. The rotation-resistant properties of this rope are secured by two

layers of strands. The inner strands are left lay, while the 12 outer

strands are right lay, which enables one layer to counteract the other

layer’s rotation. The rotation-resistant characteristics of the 19 x 7

wire ropes are superior to those of the 8 x 19 Class wire ropes.

Strands: 8


Core: IWRC

8 x 19 Classification rotation-resistant ropes are recommended for

hoisting unguided loads with a single-part or multi-part line. Outer

strands are right lay and inner strands are left lay. 8 x 19 ropes are slightly

stronger and significantly more rugged than the 19 x 7 construction.

However, the rotation-resistant properties of the 8 x 19 rotation-

resistant ropes are much less than those of the 19 x 7 construction.

8 x 19 Seale and 8 x 25 Filler Wire constructions available.

RopeDiameter

Wire RopeClass

RopeDiameter

inches

inches

mm

mm

Part #

Part #

Approx.Weight

Cable Dia. Approx. Weight

per 1,000 foot

Approx.Weight

4.8

6.5

8.0

9.5

11.0

13.0

14.5

16.0

19.0

22.0

26.0

29.0

32.0

35.0

38.0

7.5

16

28

43

62

17

29

45

65

110

173

243

IMWR0177*AC

IMWR01577*AC

IMWR0277*AC

IMWR02577*AC

IMWR0377*AC

IMWR015719*AC

IMWR02719*AC

IMWR025719*AC

IMWR03719*AC

IMWR04719*AC

IMWR05719*AC

IMWR06719*AC

13.0

14.5

16.0

19.0

22.0

26.0

29.0

32.0

35.0

38.0

0.064

0.113

0.177

0.250

0.350

0.450

0.580

0.710

1.020

1.390

1.820

2.300

2.840

3.430

4.080

480

920

1700

2600

3700

1000

2000

2800

4200

7000

9800

14400

480

920

1700

2600

3700

-

1760

2400

3700

6400

9000

12000

0.47

0.60

0.73

1.06

1.44

1.88

2.39

2.94

3.56

4.24

1.57

2.77

4.30

6.15

8.33

10.80

13.60

16.80

24.00

32.50

42.20

53.10

65.10

78.40

92.80

11.7

14.7

18.1

25.9

35.0

45.5

57.3

70.5

84.9

100.0

SPECIFICATIONS — AIRCRAFT CABLE

SPECIFICATIONS — 19 x 7 CLASS WIRE ROP

SPECIFICATIONS — 8 x 19 CLASS WIRE ROP

* Acceptance strength is not less than 2½% below the nomin

strengths listed.

* Insert (G) for Galvanized or (SS) for Stainless Steel.

03197EIPWSC

04197EIPWSC

05197EIPWSC

06197EIPWSC

07197EIPWSC

08197EIPWSC

09197EIPWSC

10197EIPWSC

12197EIPWSC

14197EIPWSC

16197EIPWSC

18197EIPWSC

20197EIPWSC

22197EIPWSC

24197EIPWSC

08819EIPIWRC

09819EIPIWRC

10819EIPIWRC

12819EIPIWRC

14819EIPIWRC

16819EIPIWRC

18819EIPIWRC

20819EIPIWRC

22819EIPIWRC

24819EIPIWRC

NominalStrength*EIP

Nominal BreakingStrength (lbs) Part #

NominalStrength*

EIP

tons

tons

3/16

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1/16

3/32

1/8

5/32

3/16

3/32

1/8

5/32

3/16

1/4

5/16

3/8

7

x 7

7 x 1 9

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

lb/ft

GAC SS

lb/ft

Galvanized Aircraft Cable (GAC) andStainless Steel Aircraft Cable (SSAC).

19 x 7 Class Rotation-Resistant Wire Rope

8 x 19 Class Rotation-Resistant Wire Rope


Lay: Right Regular

Finish: Bright


Lay: Regular

Finish: Bright

Strands: 7

Wires per Strand: 7 or 19

lbin.



Length = pull to pull

FLEMISH EYE WITH MECHANICAL SPLICE

BASIC SLING HITCHES

Vertical Choker Basket

Stren-Flex® wire rope slings are manufactured to comply with our own

strict quality control and testing standards. All Stren-Flex® products are

manufactured exclusively in the United States with the highest quality

imported and domestic materials and components.

Stren-Flex® manufactures all products with a simple mission — to provide the

highest quality, most durable, and safest material handling device available.

Further, every Stren-Flex® lifting product undergoes a thorough inspection

and rigorous quality control testing. All Stren-Flex® products exceed current

OSHA and ANSI standards — making Stren-Flex® lifting products the leader

when it comes to “strength and flexibility” in the rigging industry.

How to order wire rope slings:

1. Determine the weight of the load.

2. Determine the type of hitch to be used. One of the basic hitches (top

right) is suitable for most lifts.

3. Determine the type of sling to be used. (Will the sling have eyes, hooksor thimbles?)

4. Length of the sling measured from pull to pull.

5. Wire rope construction if not standard 6 x 19 or 6 x 37.

6. Double check diameter, length and sling type with the WLL

(Working Load Limit).

WIRE ROPE SLING BASICS

Wire rope slings are strong, ef ficient and reliable accessories in the material handling industry. Wire rope functions as a

excellent sling material in applications where a combination of strength and abrasion are necessary. Wire rope slings ar

available in an array of lengths and configurations to fit almost any application. Stren-Flex® features wire rope slings mad

with high quality domestic wire rope that are tagged with all appropriate ASME information and capacities. Import wire rop

slings are also available.

Wire Rope Sling Types

Eye & Eye

EE

Thimble &

Thimble TT

Eye & Hook

EH

Thimble &

Hook TH

Slip Thru & Slip

Thru Thimbles

STST

Sliding Choker

Eye & Eye

E/E/SCH

Sliding Chok

Eye & Thimb

E/T/SCH

Crescent &

Crescent Thimbles

CTCT

Eye &

Thimble ET



WireRopeClass

Rope Dia.(in.) Domestic Part # Import Part #

Min. Sling Length w/ Standard Eyes

WRS04^^**

WRS05^^**

WRS06^^**

WRS07^^**

WRS08^^**

WRS09^^**

WRS10^^**

WRS12^^**

WRS14^^**

WRS16^^**

WRS18^^**

WRS20^^**

WRS22^^**

WRS24^^**

IMWRS04^^**

IMWRS05^^**

IMWRS06^^**

IMWRS07^^**

IMWRS08^^**

IMWRS09^^**

IMWRS10^^**

IMWRS12^^**

IMWRS14^^**

IMWRS16^^**

IMWRS18^^**

IMWRS20^^**

IMWRS22^^**

IMWRS24^^**

1’ 6”

1’ 9”

2’ 0”

2’ 3”

2’ 6”

2’ 9”

3’ 0”

3’ 6”

4’ 0”

4’ 6”

5’ 0”

5’ 6”

6' 0"

7’ 0”

SPECIFICATIONS — SINGLE LEG WIRE ROPE SLINGS

* Call Stren-Flex® for reduced choker capacity when using sliding choker hooks.

^^ Insert Length when ordering.

** Insert Type when ordering.

* Call Stren-Flex® for reduced choker capacity when using sliding choker hooks.

** See page 22 for oblong specifications & dimensions.

Single Leg Rated Capacity (Tons)

Vertical Choker Basket

0.65

1

1.4

1.9

2.5

3.2

3.9

5.6

7.6

9.8

12

15

18

21

0.48

0.74

1.1

1.4

1.9*

2.4

2.9*

4.1*

5.6

7.2

9.1

11

13

16*

1.3

2

2.8

3.8

5

6.4

7.8

11

15

19.6

24

30

36

42

WireRope

Class

Rope Dia.

(in.)

OblongSize**

(in.)

.437

.437

.437

.437

.512

.63

.63

.75

.875

1.024

1.024

1.25

1.25

1.5

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

DIMENSIONS — SINGLE LEG WIRE ROPE SLINGS

6 x 1 9

6 x 3 7

Standard EyeSize W x L

(in.)

Thimble EyeSize W x L

(in.)

Eye HookCapacity W x L

(tons)

Slip-thru ThimbleEye Size W x L

(in.)

Crescent ThimbleEye Size W x L

(in.)

Sliding Choker

Hook (in.)

2 x 4

2-1/2 x 5

3 x 6

3-1/2 x 7

4 x 8

4-1/2 x 9

5 x 10

6 x 12

7x 14

8 x 16

9 x 18

10 x 20

11 x 22

12 x 24

7/8 x 1-5/8

1-1/16 x 1-7/8

1-1/8 x 2-1/8

1-1/4 x 2-1/4

1-1/2 x 2-3/4

1-1/2 x 2-3/4

1-3/4 x 3-1/4

2 x 3-3/4

2-1/4 x 4-1/4

2-1/2 x 4-1/2

2-7/8 x 5-1/8

2-7/8 x 5-1/8

3-1/2 x 6-1/4

3-1/2 x 6-1/4

1

1

1-1/2

2

3

4-1/2

4-1/2

7

11

11

15

15

22

22

2-1/8 x 4-1/8

2-1/8 x 4-1/8

2-1/8 x 4-1/8

2-3/8 x 4-3/8

2-3/8 x 4-3/8

2-3/8 x 4-3/8

3-3/8 x 6-5/8

3-3/8 x 6-5/8

3-3/4 x 7-1/8

3-3/4 x 7-1/8

4-3/8 x 8-3/8

4-3/8 x 8-3/8

5 x 9-1/2

5 x 9-1/2

2 x 4

2 x 4

2 x 4

2 x 5

2-1/4 x 6

2-1/4 x 7

2-3/4 x 7

3-1/4 x 8-1/2

4-1/2 x 10

4-1/2 x 11-1/2

4-7/8 x 13

5-1/2 x 14-1/2

6 x 16

6 x 17-1/2

3/8

3/8

3/8

1/2

1/2*

5/8

5/8*

3/4*

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2*

SINGLE LEG WIRE ROPE SLINGS

6 x 1 9

6 x 3 7

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2


http://slidepdf.com/reader/full/stren-flex-wire-rope-catalog 10/28stren-flex.com 1

2-Leg Bridle 3-Leg Bridle 4-Leg Bridle

MULTIPLE LEG WIRE ROPE BRIDLE SLINGS & THIMBLES

MULTIPLE LEG WIRE ROPE BRIDLE SLINGS

* Working Load Limit, based on standard carbon fittings unless otherwise noted.

** See page 22 for oblong specifications & dimensions.

RopeClass

RopeDia.(in.)

Min. LegLength (ft)

EIP, IWRC

Two Legs Three Legs Four Legs

60˚ 60˚ 60˚45˚ 45˚ 45˚30˚ 30˚ 30˚

Hook WLL*

(tons) Oblong

Size**

(in.)

Oblong

Size**

(in.)

Oblong

Size**

(in.)

WLL (tons) WLL (tons) WLL (tons)

1.5

2

2

2.5

2.5

3

3

3.5

4

4.5

5.0

5.0

5.5

6

1.1

1.7

2.5

3.5

4.4

5.5

6.8

9.7

13

17

21

26

31

37

1.7

2.6

3.7

5

6.6

8.3

10

15

20

26

31

38

46

55

2.2

3.5

5

6.7

8.8

11

14

19

26

34

42

51

62

73

.91

1.4

2

2.7

3.6

4.5

5.5

7.9

11

14

17

21

25

30

1.4

2.1

3

4.1

5.4

6.8

8.3

12

16

21

26

31

38

45

1.8

2.8

4.1

5.5

7.1

9

11

16

21

28

34

42

50

60

.65

1

1.4

1.9

2.5

3.2

3.9

5.6

7.6

9.8

12

15

18

21

3/4

1

1-1/2

2

3

3

5

5

7-1/2

10

10

15

15

22

.437

.437

.512

.512

.63

.75

.75

1.024

1.024

1.250

1.500

1.500

1.750

2.000

.437

.512

.630

.750

.750

.875

1.024

1.260

1.500

1.500

1.750

2.000

2.000

2.250

.512

.630

.750

.750

1.024

1.024

1.260

1.500

1.500

1.750

2.000

2.250

2.500

2.500

.97

1.5

2.2

2.9

3.8

4.8

5.9

8.4

11

15

18

22

27

32

1.3

2

2.9

3.9

5.1

6.4

7.8

11

15

20

24

30

36

42

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

6 x 1

9

6 x 3 7

L e n g

t h

A

D

C

E

B

D

RopeDiameter Part #

StandardPack

25

25

25

25

10

10

10

IMTH04

IMTH05

IMTH06

IMTH08

IMTH10

IMTH12

IMTH14

2.19

2.5

2.88

3.63

4.25

5

5.5

1.5

1.81

2.13

2.56

3

3.5

4

1.63

1.88

2.13

2.75

3.25

3.75

4.25

0.88

1.06

1.13

1.5

1.75

2

2.25

0.41

0.5

0.66

0.84

1

1.25

1.38

0.075

0.14

0.25

0.51

0.75

1.47

1.85

1/4

5/16

3/8

1/2

5/8

3/4

7/8

A(in.)

B(in.)

C(in.)

D(in.)

E(in.)

Weight (lb)

HEAVY DUTY WIRE ROPE THIMBLES (HOT GALVANIZED)



C

L R

B

A

K

G

H K

D

T

O

J

C

LR

B

A

I

G

H

S

D

T

O

stren-flex.com 1

Alloy Carbon

WLL(lb)

HookPart #

LatchPart #

WLL(lb)

HookPart #

LatchPart #

A(in.)

B(in.)

C(in.)

D(in.)

G(in.)

H(in.)

I(in.)

L(in.)

R(in.)

S(in.)

T (in.)

O(in.)

Weigh(lb

Dimensions

Rigging Hook • Built-in distortion detectors

• Design factor 5:1

• Load rating marked on each hook body

• Hook and latch assemblies furnished separately

• Carbon hooks have a clear protective coating to

resist rust and for cleaner handling (use suf fix "C"when ordering carbon clear finish, use suf fix "G"

when ordering hot dip galvanized).

Alloy Carbon

WLL(lb)

HookPart #

LatchPart #

WLL(lb)

HookPart #

LatchPart #

A(in.)

B(in.)

C(in.)

D(in.)

G(in.)

H(in.)

J(in.)

K (in.)

L(in.)

O(in.)

R(in.)

T (in.)

Weigh(lb

2,205

3,308

4,410

6,615

11,025

15,435

24,255

33,075

48,510

1,654

2,205

3,308

4,410

6,615

11,025

16,538

20,500

33,075

1.50

1.75

2.13

2.50

3.06

3.88

4.69

5.34

6.63

0.75

0.88

1.13

1.25

1.56

2.00

2.44

2.84

3.50

0.38

0.44

0.50

0.63

0.75

0.94

1.13

1.25

1.56

3.06

3.33

3.67

4.20

5.11

6.24

7.89

8.37

10.19

0.87

0.94

1.06

1.27

1.44

1.82

2.25

2.59

3.00

1.05

1.11

1.21

1.43

1.63

2.01

2.63

2.94

3.50

0.93

0.97

1.06

1.19

1.50

1.78

2.38

2.50

3.30

0.63

0.71

0.88

0.94

1.31

1.68

1.88

2.19

2.69

4.37

5.04

5.63

6.55

7.97

10.07

12.41

14.05

17.37

0.93

0.97

1.06

1.16

1.41

1.69

2.19

2.30

3.12

3.13

3.66

4.09

4.67

5.78

7.31

9.03

10.21

12.81

0.87

0.97

1.03

1.16

1.53

1.94

2.52

2.54

2.73

0.66

1.12

1.46

2.42

4.10

8.16

15.60

21.58

39.89

M6402A

M6403A

M6404A

M6405A

M6407A

M6409A

M6411A

M6415A

M6422A

M6402C

M6403C

M6404C

M6405C

M6407C

M6409C

M6411C

M6415C

M6422C

4X1302

4X1303

4X1304

4X1305

4X1307

4X1309

4X1311

4X1315

4X1322

4X1302

4X1303

4X1304

4X1305

4X1307

4X1309

4X1311

4X1315

4X1322

Dimensions

Swivel Rigging Hook • Built-in distortion detectors

• Design factor 5:1

• Hook and latch assemblies furnished separately

• Painted orange

• Carbon swivel hooks are technically advanced

Micro-alloy which requires no secondary heat treat

• Alloy swivel hooks are heat-treated quenched

and tempered

2,205

3,308

4,410

6,615

11,025

15,435

24,255

33,060

48,488

1,654

2,205

3,308

4,410

6,615

11,025

15,435

22,040

33,060

2.00

2.50

3.00

3.00

3.50

4.75

5.50

6.00

7.75

1.11

1.38

1.65

1.65

1.77

2.39

2.55

2.47

3.82

1.25

1.50

1.75

1.75

2.00

2.75

3.25

3.50

4.75

3.06

3.33

3.67

4.20

5.11

6.24

7.69

8.37

10.19

0.87

0.94

1.06

1.27

1.44

1.82

2.25

2.59

3.00

1.05

1.11

1.21

1.43

1.63

2.01

2.63

2.94

3.50

0.63

0.71

0.88

0.94

1.31

1.68

1.88

2.19

2.69

5.83

6.83

7.76

8.40

9.76

12.42

14.89

15.79

21.18

4.63

5.44

6.25

6.49

7.53

9.67

12.06

11.95

16.68

0.38

0.50

0.63

0.63

0.75

1.00

1.13

1.25

1.50

0.87

0.97

1.03

1.16

1.53

1.94

2.46

2.62

2.74

0.93

0.97

1.06

1.16

1.41

1.69

2.22

2.23

3.05

1.05

1.56

2.50

3.20

5.36

10.56

19.00

26.75

51.80

M3402A

M3403A

M3404A

M3405A

M3407A

M3409A

M3411A

M3415A

M3422A

M3402C

M3403C

M3404C

M3405C

M3407C

M3409C

M3411C

M3415C

M3422C

4X1302

4X1303

4X1304

4X1305

4X1307

4X1309

4X1311

4X1315

4X1322

4X1302

4X1303

4X1304

4X1305

4X1307

4X1309

4X1311

4X1315

4X1322

RIGGING HOOKS



B

A

stren-flex.com 1

AFTER SWAGE DIMENSIONS

WINCH LINE SPECIFICATIONS

HOIST CABLE & WINCH LINES

Rope Dia.(in.) Part # A B

ASC-1060-6

ASC-1426-1.00

ASC-1060-8A

ASC-1060-8

ASC-1184-.75

ASC-1278-1.06

ASC-1060-10A

ASC-1060-10

ASC-FB-10-2

ASC-1255

ASC-1064-1.10

ASC-1092-1.22

ASC-1104-.94

ASC-1094

ASC-1060-12A

ASC-1060-12

ASC-1256-1.75

ASC-1060-14

ASC-4150

ASC-1959

ASC-1060-16A

ASC-1060-16

ASC-1356

ASC-4016

ASC-1060-18

3/16

1/4

5/16

3/8

7/16

9/16

1/2

1/2

3/4

1/2

5/8

3/4

1

5/8

3/4

11/16

7/8

7/8

1

1

3/4

3/4

7/8

7/8

1

1-1/8

7/8

1

1-1/8

1

1-1/8

1-1/4

7/8

1-1/8

1-1/8

1-1/8

1

1-1/4

1-3/8

1-1/2

1

7/8

1-5/16

1-1/2

1-3/16

1-9/16

1-3/4

1-3/4

1-3/4

2

2

2-1/2

2-1/4

2-3/8

2-1/2

2-1/4

2-1/2

Hoist Cable AssembliesStren-Flex® manufactures replacement cables for

wire rope hoists. Hoist cable assemblies can be

made to custom specifications given construction,

length, and fittings needed. Ferrule sizes other

than those shown are available.

Winch LinesWinch lines are typically made with 6 x 19

construction wire rope with an independent wire

rope core for improved strength and abrasion

resistance. For more flexibility, wire rope with a

fiber core can be used.

• High quality flemish eye splice with

mechanical swage

• Heavy duty thimble eye

• Carbon or alloy hooks with latch

CableDiameter

(in.)

HookCapacity (ton)Part #

Nominal Breaking Strength (lbs)

Fiber Core IWRC

13,420

18,180

23,600

29,800

36,600

3

4.5

4.5

4.5

7

3/8

7/16

1/2

9/16

5/8

IMWL06X**^^3TSH

IMWL07X**^^4.5TSH

IMWL08X**^^4.5TSH

IMWL09X**^^4.5TSH

IMWL10X**^^7TSH

15,100

20,400

26,600

33,600

41,200

* See page 11 for Hook Specifications and Dimensions

** Insert Cable Length

^^ Insert (FC) for Fiber Core or (SC) for IWRC



B

C

E

F

GH

D A

stren-flex.com 1

WIRE ROPE CLIPS

Dimensions

Size(in.)

Size(in.)

Part #

Min.ClipsReq'd.

Part #

C(in.)

Approx.Weight

(lb)

D(in.)

E(in.)

F (in.)

A(in.)

Amt. WireRope to turnback (in.)

B(in.)

Torque(ft/lb)

G(in.)

H(in.)

Min. No.Clips

A B C D E F G

Rope Turnbuckle

Torque(ft/lb)

Weight (lb)

1/8*

3/16*

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1/16*

1/8*

3/16

1/4

5/163/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1-1/8

7/16

9/16

1/2

3/4

3/4

1

1

1-1/4

1-1/4

1-7/16

1-5/8

1-13/16

2

2-1/8

2-5/16

2-3/8

.03

.04

.063

.13

.15

.21

.37

.37

.59

.59

.84

1.25

1.66

2.43

15/32

19/32

3/4

7/8

1

1-3/16

1-3/16

1-5/16

1-5/16

1-1/2

1-3/4

1-7/8

2

2-5/16

2-3/8

2-19/32

.15

.18

.25

.31

.31

.38

.44

.44

.5

.5

.56

.63

.63

.75

13/32

1/2

31/32

23/32

29/32

1-1/16

1-1/8

1-1/4

1-11/32

1-7/16

1-19/32

1-25/32

1-25/32

2-3/16

2-1/4

2-1/2

.65

.81

.94

1.19

1.311.63

2

2

2.31

2.31

2.56

3.06

3.44

4

3/8

1/2

9/16

11/16

3/4

7/8

7/8

15/16

15/16

1-1/16

1-1/4

1-1/4

1-1/4

1-7/16

1-7/16

1-7/16

.45

.5

.56

.75

.841

1.19

1.19

1.38

1.38

1.56

1.81

2

2.75

13/16

15/16

1-3/16

1-5/16

1-5/8

1-25/32

1-29/32

1-31/32

2

2-11/32

2-7/16

2-5/8

2-13/16

3-1/8

3-1/8

3-1/8

.38

.5

.56

.75

.75

.88

1.06

1.06

1.25

1.25

1.31

1.63

1.88

2

15/16

1-5/32

1-7/16

1-11/16

1-15/16

2-5/16

2-5/16

2-1/2

2-1/2

2-13/16

3-5/32

3-5/32

3-19/32

4-1/8

4-1/4

4-7/16

.38

.5

.56

.69

.75

.84

1

1

1.25

1.25

1.44

1.75

2.06

2.19

2

2

2

2

2

2

3

3

3

4

4

5

6

7

7

8

.45

.56

.63

.75

.75

.88

1.06

1.06

1.28

1.28

1.56

1.81

2

2.06

4-1/2

7-1/2

15

30

45

65

65

95

95

130

225

225

225

360

360

360

.69

.94

1.06

1.31

1.441.63

1.88

1.88

2.09

2.09

2.38

2.88

3

3.38

3-1/4

3-3/4

4-3/4

5-1/4

6-1/2

7

11-1/2

12

12

18

20

26

34

37

44

48

5

9

18

30

42

70

75

100

100

150

240

250

310

460

520

590

M244

M245

M246

M247

M248

M249

M250

M296

M251

M252

M253

M254

M255

M256

M257

M258

3

3

3

3

33

4

4

4

4

5

5

6

7

IMMC01

IMMC02

IMMC03

IMMC04

IMMC05IMMC06

IMMC07

IMMC08

IMMC09

IMMC10

IMMC12

IMMC14

IMMC16

IMMC18

23/32

31/32

1-1/32

1-3/8

1-1/2

1-7/8

1-7/8

2-3/8

2-3/8

2-3/4

3-1/8

3-1/2

3-7/8

4-1/4

4-5/8

4-15/16

2

3

4.5

15

1530

40

45

50

75

75

130

130

200

12 - 24

1/4 - 20

5/16 - 18

3/8 - 16

7/16 - 14

1/2 - 13

1/2 - 13

9/16 - 12

9/16 - 12

5/8 - 11

3/4 - 10

3/4 - 10

3/4 - 10

7/8 - 9

7/8 - 9

7/8 - 9

4

4-3/4

5-1/2

7

7-3/49-1/2

10-1/4

15-1/4

16

16

22-1/4

23-1/2

31

39

Malleable Wire Rope ClipsUsed for light duty, non-critical applications only. Typical uses include guard lines and fencing. Do not use malleable wire

rope clips for critical or lifting applications. Load may be suddenly released resulting in injury or death.

Dimensions (in.)*

1/16" and 1/8" are not covered by Federal Specification FF-C-450 D. CAUTION: Never use any wire rope clip to directly

connect two straight lengths of wire rope.

* Dimensions may vary.

Proper use of wire rope clip

1 2 3

DROP FORGED WIRE ROPE CLIPS

G

D

F

C

A

E



E

D B

R W

L

P

stren-flex.com 1

Round Pin

Chain Shackles

Safety (Bolt & Nut)

Web Shackles

SHACKLES

Working Load Limit (tons)

Size(in.)

Size(in.)

CMCarbon

CM Alloy

CM Carbon

ImportCarbon

CM Alloy Import Carbon

P*(in.)

E*(in.)

W*(in.)

R*(in.)

L*(in.)

B min.*(in.)

Weight*(lb)

3/16

1/4

5/16

3/8

7/16

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-5/8

1-3/4

2

3/16

1/4

5/16

3/8

7/16

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

1-5/8

1-3/4

2

0.250

0.312

0.375

0.438

0.5

0.625

0.75

0.875

1

1.125

1.25

1.375

1.5

1.625

1.75

2

2.25

0.307

0.401

0.463

0.531

0.593

0.718

0.843

0.968

1.109

1.234

1.375

1.531

1.656

1.781

1.906

2.156

2.406

0.375

0.469

0.531

0.656

0.75

0.813

1.063

1.25

1.438

1.688

1.812

2.031

2.25

2.375

2.625

2.875

3.25

0.625

0.875

1

1.125

1.25

1.375

1.875

2.125

2.375

2.625

2.875

3.25

3.5

3.75

4.125

4.5

5.25

0.875

1.125

1.25

1.437

1.689

1.875

2.375

2.813

3.312

3.75

4.25

4.688

5.25

5.75

6.25

7

7.75

0.562

0.75

0.812

0.937

1.062

1.187

1.5

1.75

2

2.312

2.625

2.875

3.25

3.375

4

4.5

5.25

0.06

0.12

0.2

0.3

0.5

0.75

1.3

2.3

3.5

5

7

9.5

12.5

17.2

23.5

27.7

39

1/2

3/4

1

1-1/2

2

3

4-1/2

6-1/2

8-1/2

10

12

14

17

20

24

30

35

n/a

n/a

n/a

2

2.6

3.3

5

7

9.5

12.5

15

18

21

30

35

40

50

1/3

1/2

3/4

1

1-1/2

2

3-1/4

4-3/4

6-1/2

8-1/2

9-1/2

12

13-1/2

17

24

25

35

n/a

n/a

n/a

M648A*

M649A*

M650A*

M651A*

M652A*

M653A*

M654A*

M655A*

M656A*

M666A*

M657A*

M685A*

M677A*

M658A*

M645*

M646*

M647*

M648*

M649*

M650*

M651*

M652*

M653*

M654*

M655*

M656*

M666*

M657*

M685*

M677*

M658*

IMSPASCG03

IMSPASCG04

IMSPASCG05

IMSPASCG06

IMSPASCG07

IMSPASCG08

IMSPASCG10

IMSPASCG12

IMSPASCG14

IMSPASCG16

IMSPASCG18

IMSPASCG20

IMSPASCG22

IMSPASCG24

IMSPASCG26

IMSPASCG28

IMSPASCG32

SHACKLES

SHACKLE PART NUMBERS

• All CM shackles meet or exceed Federal Specification RRC-271D

• Working Load Limit shown as permanent marking on body

• Available in painted, galvanized and self-colored finishes

(CM only). Import models available in galvanized finish only.

• Alloy pin

• Heat treated and tempered

OTHER TYPES AVAILABLE:

* Dimensions & weights are for CM shackles. Import models may vary.

* Insert (P) for Painted finish; (G) for Galvanized finish; blank for self-colored.



TURNBUCKLES

1/4

5/16

3/8

1/2

5/8

3/4

1/4

5/16

3/8

1/2

5/8

3/4

1/4

5/16

3/8

1/2

5/8

3/4

.25

.31

.38

.50

.63

.75

.34

.44

.53

.72

.88

1.00

.63

.88

.88

1.06

1.31

1.50

.41

.44

.53

.69

.84

1.00

.22

.28

.34

.44

.50

.63

.28

.28

.31

.41

.50

.56

.45

.50

.56

.66

.84

.97

.78

.94

1.13

1.44

1.75

2.13

.41

.47

.50

.63

.75

.94

1.66

1.91

2.28

2.84

3.53

4.31

1.78

2.19

2.56

3.22

3.88

4.69

.28

.28

.31

.41

.50

.56

.50

.50

.59

.75

1.03

1.28

1.63

2.00

2.19

2.75

3.50

4.13

.63

.69

.81

1.00

1.31

1.63

A A AB B BC C CD D DE E E F G H

Dimensions (in.) Dimensions (in.) Dimensions (in.)

BODIES/STUB END TURNBUCKLES

Size (in)(Diameter x Take-Up)

Size (in)Diameter (A)

x Take-Up (B)

Approx. Weight (lb)Working Load Limit (lb)

Dimensions (in.)

Hook & Hook Hook & Eye

C

Jaw & Jaw Jaw & Eye

Approx.Weight

each Bodyonly (lb)

Approx.Weight

each Stubend (lb)

Average OverallLength with Endsin Closed Position

E F*

Eye & Eye Jaw & Eye Jaw & Eye

D

1/4 x 4

5/16 x 4-1/2

3/8 x 6

1/2 x 6

1/2 x 9

1/2 x 12

5/8 x 6

5/8 x 9

5/8 x 12

3/4 x 6

3/4 x 9

3/4 x 12

IMTB0404**

IMTB0504**

IMTB0606**

IMTB0806**

IMTB0809**

IMTB0812**

IMTB1006**

IMTB1009**

IMTB1012**

IMTB1206**

IMTB1209**

IMTB1209**

3/8 x 6

1/2 x 6

1/2 x 9

1/2 x 12

5/8 x 6

5/8 x 9

5/8 x 12

3/4 x 6

3/4 x 9

3/4 x 12

8.25

9.56

11.88

13.31

16.31

19.31

15.50

18.50

21.50

17

20

23

Eyesand/orHooks

Part #

WorkingLoad Limit

(lb)

.3

.5

.75

1.5

1.75

2.18

2.63

3

3.25

3.75

4.5

5.75

1,200

2,200

2,200

2,200

3,500

3,500

3,500

5,200

5,200

5,200

.3

.53

.82

1.62

1.82

2.19

2.69

3.01

3.5

4.25

5

5.75

.3

.6

.8

1.0

1.0

1.2

1.4

1.2

1.6

2.1

.4

.58

.93

1.68

1.85

2.2

2.82

3.25

3.75

4.68

5.38

6.12

.7

1.4

1.7

1.8

2.0

2.5

3.1

3.3

4.0

4.8

400

700

1,000

1,500

1,500

1,500

2,250

2,250

2,250

3,000

3,000

3,000

7.13

7.50

10.50

13.50

7.88

10.88

13.88

8.25

11.25

14.25

4.44

4.25

4.25

4.25

4.06

4.06

4.06

4.38

4.38

4.38

.56

.75

.75

.75

.94

.94

.94

1.13

1.13

1.13

16

16

19

22

16

19

22

17

20

23

500

800

1,200

2,200

2,200

2,200

3,500

3,500

3,500

5,200

5,200

5,200

** Specify type: (EE) Eye & Eye; (HH) Hook & Hook; (HE) Hook & Eye; (JJ) Jaw & Jaw; (JE) Jaw & Eye.

Hooks not supplied on sizes larger than 1-1/2" diameter. Jaw ends up to 5/8". Fitted with bolt and nut. Jaw ends 3/4" & up: fitted with pin and cotter.

* Closed position.

EYE & EYE (EE)

HOOK & HOOK (HH)

HOOK & EYE (HE)

JAW & JAW (JJ)

JAW & EYE (JE)

JAWEYEHOOK

B

E E

GD

A

A

A

A

A

E

E

D D

B B

D

C CF

A

A

F

C B

E

E

D

H

D

C

B

STUB END

BODY ONLY



SNATCH BLOCKS

Sheave Snatch Block SpecificationsWorking

Load Limit (tons)

Block w/ Swivel Hook Wire Rope

Size(in.)

Part # SheaveO.D. (in.)

Weight (lb)

5/16 - 3/8

3/8 - 1/2

3/8 - 1/2

3/8 - 1/2

3/8 - 1/2

3/8 - 1/2

3/8 - 1/2

5/8 - 3/4

5/8 - 3/4

5/8 - 3/4

5/8 - 3/4

5/8 - 3/4

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

1 - 1 1/8

1 - 1 1/81 - 1 1/8

1 - 1 1/8

1 - 1 1/8

1 - 1 1/8

1 1/8 - 1 1/4

1 1/8 - 1 1/4

3/8 - 1/2

3/8 - 1/2

5/8 - 3/4

5/8 - 3/4

5/8 - 3/4

5/8 - 3/4

5/8 - 3/4

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

3/4 - 7/8

1 - 1 1/8

1 - 1 1/8

1 - 1 1/8

1 - 1 1/8

SB02S03BH

SB04S04BH

SB04S06BH

SB04S08BH

SB04S10BH

SB04S12BH

SB04S14BH

SB08S06BH

SB08S08BH

SB08S10BH

SB08S12BH

SB08S14BH

SB12S06BH

SB12S08BH

SB12S10BH

SB12S12BH

SB12S14BH

SB12S16BH

SB22S08BH

SB22S10BHSB22S12BH

SB22S14BH

SB22S16BH

SB22S18BH

SB30S20BH

SB30S24BH

DB08D04BH

DB08D06BH

DB12D06BH

DB12D08BH

DB12D10BH

DB12D12BH

DB12D14BH

DB15D06BH

DB15D08BH

DB15D10BH

DB15D12BH

DB15D14BH

DB22D08BH

DB22D10BH

DB22D12BH

DB22D14BH

6

15

18

22

34

39

41

29

32

40

46

58

42

53

66

75

92

119

102

125131

149

178

214

341

461

26

34

50

54

61

81

104

61

82

94

123

150

132

171

173

201

3

4

6

8

10

12

14

6

8

10

12

14

6

8

10

12

14

16

8

1012

14

16

18

20

24

4

6

6

8

10

12

14

6

8

10

12

14

8

10

12

14

2

4

4

4

4

4

4

8

8

8

8

8

12

12

12

12

12

12

22

2222

22

22

22

30

30

8

8

12

12

12

12

12

15

15

15

15

15

22

22

22

22

SB02S03BS

SB04S04BS

SB04S06BS

SB04S08BS

SB04S10BS

SB04S12BS

SB04S14BS

SB08S06BS

SB08S08BS

SB08S10BS

SB08S12BS

SB08S14BS

SB12S06BS

SB12S08BS

SB12S10BS

SB12S12BS

SB12S14BS

SB12S16BS

SB22S08BS

SB22S10BSSB22S12BS

SB22S14BS

SB22S16BS

SB22S18BS

SB30S20BS

SB30S24BS

DB08D04BS

DB08D06BS

DB12D06BS

DB12D08BS

DB12D10BS

DB12D12BS

DB12D14BS

DB15D06BS

DB15D08BS

DB15D10BS

DB15D12BS

DB15D14BS

DB22D08BS

DB22D10BS

DB22D12BS

DB22D14BS

6

15

18

22

34

39

41

29

32

40

46

58

42

53

66

75

92

119

102

125131

149

178

214

341

461

26

34

50

54

61

81

104

61

82

94

123

150

132

171

173

201

3

4

6

8

10

12

14

6

8

10

12

14

6

8

10

12

14

16

8

1012

14

16

18

20

24

4

6

6

8

10

12

14

6

8

10

12

14

8

10

12

14

Block w/ Swivel Shackle

SheaveO.D. (in.)

Weight (lb)

Part #

Snatch blocks are one of the most widely used general purpose blocks available. Over 235 models of Johnson single an

double sheave snatch blocks are available. Johnson snatch blocks have a convenient side opening feature making it easy t

thread the block without removing any fittings from the end of the wire rope. Stren-Flex® also offers a full line of mobile cran

blocks, overhaul balls, swivels, hooks, and sheaves.

S i n g l e S h e a v e

T w o S h e a v e

Single Sheave

w/ Hook

Single Sheave

w/ Shackle

Two Sheave

w/ Hook

Two Sheave

w/ Shackle



CARBON CHAIN G43, G70

Grade 43 High Test Chain*

A higher strength carbon steel chain,Grade 43 high test chain provides an

increased strength to weight ratio in

comparison to Grade 30 chain. Grade

43 chain is often used in applications

involving logging, construction, load

binding and load securement.

Chain Size(in.)

Chain Size(in.)

Standard per foot (available in chain pails and drums)

Standard per foot (available in chain pails and drums)

Standard Drum(ft)

Standard Drum(ft)

Max. Weight per 100 ft. (lb)

Max. Weight per 100 ft. (lb)

1/4

5/16

3/8

7/16

1/2

5/8

3/4

7/8

1

1/4

5/163/8

7/16

1/2

2,600

3,900

5,400

7,200

9,200

13,000

20,200

24,500

34,100

3,150

4,7006,600

8,750

11,300

DomesticPart #

DomesticPart #

Working LoadLimit (lb)

Working LoadLimit (lb)

678141FT

678142FT

678143FT

678144FT

678145FT

678146FT

678147FT

678148FT

678149FT

678531FT

678532FT678533FT

678534FT

678535FT

800

550

400

300

200

150

100

80

60

800

550400

300

200

60

98

133

204

227

357

606

776

904

71

100156

204

259

Size(in. x ft.)

Grade 43 Grade 70

Part #(Welded w/ eye

grab hooks)

Part #(Welded w/ eye

grab hooks)

Part #(Mechanical w/

clevis hook)

Part #(Mechanical w/

clevis hook)

5/16 x 20

3/8 x 20

1/2 x 20

3,900

5,400

9,200

4,700

6,600

11,300

BC052043W

BC062043W

BC082043W

BC052070W

BC062070W

BC082070W

BC052043C

BC062043C

BC082043C

BC052070C

BC062070C

BC082070C

WorkingLoad Limit

(lb)

WorkingLoad Limit

(lb)

Grade 70 Transport orBinding Chain*Load ratings for Grade 70 chain averages

20% higher than Grade 43 chain, so a

smaller size chain can be used for many

jobs. Advantages include less weight,

easier handling and more convenient

storage. Higher strength makes Grade

70 ideal for truckers, loggers and

highway crews for applications involving

towing, hauling, lashing and trawling.

GRADE 43 GRADE 70

Grade 43 & Grade 70 Binder Chain AssembliesStren-Flex® Grade 43 & 70 binder assemblies are used by truckers, contractors,

farmers and anyone dragging, binding or securing an object or objects. Binder

chain assemblies can be made by welded or mechanical connections, in any

length desired. Standard sizes are shown below.

* Grade 43 and 70 chain is not to be used for overhead lifting.



CARBON CHAIN ATTACHMENTS: G43, G70

Grade 43 Clevis Grab Hook (Zinc)

Grade 43 Clevis Slip Hook (Zinc)

Size(in.)

Size(in.)

Size(in.)

Working Load Limit(lb)



DomesticPart #

DomesticPart #

DomesticPart #

W

W

W

D

D

D

H

H

H

L

L

L

R

R

R

P

P

P

Weight(lb)

Weight(lb)

Weight(lb)

1/4

5/16

3/8

7/16

1/2

1/4

5/16

3/8

7/16

1/2

5/16

3/8

0.36

0.42

0.50

0.58

0.66

0.36

0.42

0.50

0.58

0.61

0.42

0.50

2.05

2.41

2.94

3.25

3.70

2.33

2.72

0.86

1.02

1.12

2.48

2.95

0.36

0.44

0.52

0.60

0.67

0.72

0.77

0.86

1.02

1.12

0.45

0.51

3.00

3.56

4.20

4.94

5.20

2.27

4.13

4.81

5.56

6.31

3.53

4.10

2,600

3,900

5,400

7,200

9,200

2,600

3,900

5,400

7,200

9,200

4,700

6,600

61193

61293

61393

61493

61593

66173

66273

66373

66473

66573

62273

62373

Dimensions (in.)

Dimensions (in.)

Dimensions (in.)

1.57

1.98

2.23

2.94

2.93

2.32

2.56

3.04

3.50

4.15

1.99

2.35

0.31

0.38

0.44

0.50

0.55

0.31

0.38

0.44

0.50

0.55

0.38

0.44

0.37

0.63

1.10

1.60

2.42

0.35

0.63

1.02

1.56

2.27

0.75

1.10

Grade 70 Clevis Grab Hook

Size(in.)


DomesticPart # W D H L R P

Weight (lb)

5/16

3/8

5/16

3/8

0.38

0.45

0.38

0.45

3.25

3.87

3.25

3.87

0.94

1.00

1.06

1.24

4.62

5.42

4.62

5.42

4,700

6,600

4,700

6,600

6905AWL

6906AWL

M6905A

M6906A

Dimensions (in.)

2.91

3.39

2.91

3.39

0.39

0.49

0.39

0.49

0.96

1.66

0.75

1.25

Grade 70 Clevis Slip Hook

Without Latch

With Latch

• Heat treated pins

• Hooks are heat treated and tempered

• Designs' ultimate strength equals 3 timesworking load limit, matching NACM specifications

• Hook embossed with trace code providin

traceability through manufacturing and

testing process to heat of steel• Not to be used for overhead lifting

• Heat treated pins

• Hooks are heat treated and tempered

• Designs' ultimate strength equals 3 times

working load limit, matching NACM specifications


traceability through manufacturing and

testing process to heat of steel

• Not to be used for overhead lifting

• Meets ASTM & NACM standards

• Designed specifically for transport grade 70 chain

• 4:1 design factor

• Yellow chromate finish

• Not recommended for overhead lifting

• Meets ASTM & NACM standards

• Designed specifically for transport grade 70 chain

• 4:1 design factor


traceability throughout the manufacturin

and testing process to heat of steel

P

P

W

W

H

H

D

D

L

L

R

R

P

P

R

W

W

H

H

D

D

L

L

R



LOAD BINDERS

Lever Type Load Binder • All components are forged, no cast parts

• Forged binders are lighter and stronger than cast binders

• Under equal force a forged handle will yield and bend while

a cast handle may break

Part #Working

Load Limit (lb)

Handle Take Up

(in.)Handle Length

(in.)Weight

(lb)G70G43

Size (in.)

1/4

3/8

1/2

3/8

1/4

3/8

1/2

3/8

1/2

-

5/16

3/8

3/8

3/16

5/16

3/8

5/16

3/8

48304

48305

48406

48769

DB-1

DB-2

DB-3

IMLB05-06

IMLB06-08

2,600

5,400

9,200

7,100

2,600

5,400

9,200

5,400

9,200

3.75

4.50

4.75

4.50

3.75

4.50

4.50

3.70

4.30

11.25

16.12

16.62

16.62

11.75

16.00

18.00

15.50

17.25

3.0

8.1

10.6

8.1

4

8.8

13

8.4

12.2

Part #Working

Load Limit(lb)

End Fittings Take Up(in.)

Handle Length(in.)

Weight (lb)G70G43

Size (in.)

3/8

1/2

5/8

3/8

1/2

5/8

3/8

1/2

5/16

3/8

1/2

5/16

3/8

1/2

5/16

3/8

48365

48366

48367

DR-1

DR-2

DR-3

IMRB05-06

IMRB06-08

Hook/Hook

Hook/Hook

Hook/Hook

Hook/Hook

Hook/Hook

Hook/Hook

Hook/Hook

Hook/Hook

5,400

9,200

13,000

6,600

9,200

13,000

5,400

9,200

8.00

8.00

8.00

8.00

8.00

8.00

8.00

8.00

14.00

14.00

14.00

15.50

15.50

15.50

15.00

15.00

12

13

16

12

14

15

10.5

11.7

Ratchet Type Load Binder • Each ratchet component is forged from pure alloy steel

• Handle is designed loose using self-locking one-way bolt allowing

easy removal of unwanted debris such as mud, snow or ice

• Proof tested to 50% of the minimum breaking strength

• Gears are permanently welded to the barrel

Removable Handle Load Binder • Removing handle provides greater load security by

making it less likely for the load or the load binder to be stolen

• Reduces overall weight and cost as only one handle is needed

Part # TypeWorking

Load Limit (lb)

Handle Take Up

(in.)

Handle Length(in.)

Weight (lb)G70G43

Size (in.)

3/8

1/2

-

3/8

1/2

-

5/16

3/8

-

5/16

3/8

-

48565

46566

46565H

DR-1-B

DR-X15-B

DR-RH

Body

Body

Handle

Body

Body

Handle

5,400

9,200

-

6,600

15,000*

-

8.00

8.00

-

8.00

8.00

-

-

-

14

-

-

17.25

7.4

11.7

4.3

8

10

3

CM

CM

CM

Durabilt

Durabilt

Durabilt

Import**

Import**

* Ultimate load is 3.5 times WLL in lieu of 4.

** Import models specifications and dimensions may vary.



A

B

C

A

B

C

stren-flex.com 2

ALLOY CHAIN: G80, G100

Grade 80: CM Herc-Alloy 800 Chain• Meets or exceeds many national and

international standards

• Certification included in every drum

• 100% Proof Tested

• Suitable for overhead lifting

Grade 100: CM Herc-Alloy 1000 Chain• Meets or exceeds many national and

international standards

• 25% higher working load limit when compared

to Grade 80

• Environmentally friendly gray coating for

distinct appearance, ease of identification

• Certification included with every drum

• 100% Proof Tested

• Suitable for overhead lifting

Chain Size(in.)

Chain Size(in.)

Nominal Chain Dimensions (in.)

Nominal Chain Dimensions (in.)

Inside LengthB

Inside LengthB

Material Dia. A

Material Dia. A

Inside WidthC

Inside WidthC

Chain Weight (lb/ft)

Chain Weight (lb/ft)

Approx.No. of Links

(per ft)

Approx.No. of Links

(per ft)

Standard Drum(ft)

Standard Drum(ft)

Drum Weight(lb)

Drum Weight(lb)

7/32

9/32

5/16

3/8

1/2

5/8

3/4

7/8

1

1-1/4

7/32

9/32

3/8

1/2

5/8

3/4

2,100

3,500

4,500

7,100

12,000

18,100

28,300

34,200

47,700

72,300

2,700

4,300

8,800

15,000

22,600

35,300

Part #

Part #

WorkingLoad Limit

(lb)

WorkingLoad Limit

(lb)

607020

607028

607031

607037

607050

607062

607075

607087

607101

607128

607321

607328

607339

607351

607363

607378

0.218

0.281

0.315

0.394

0.512

0.630

0.787

0.875

1.000

1.260

0.218

0.281

0.394

0.512

0.630

0.787

0.676

0.883

1.019

1.247

1.440

1.777

2.234

2.250

3.070

3.250

0.676

0.883

1.247

1.559

1.916

2.397

0.312

0.395

0.455

0.574

0.734

0.855

1.070

1.137

1.490

1.656

0.312

0.395

0.574

0.734

0.855

1.070

0.44

0.73

0.91

1.44

2.55

3.82

5.95

7.76

9.39

15.71

0.44

0.73

1.44

2.46

3.70

5.80

17.8

13.6

11.8

9.6

8.3

6.8

5.4

5.3

3.9

3.7

17.8

13.6

9.6

7.7

6.3

5.0

800

500

n/a

500

300

200

100

100

100

90

800

500

500

300

200

100

354

365

n/a

719

765

765

596

776

939

1,414

354

365

720

738

740

577



90˚60˚ 45˚ 30˚ 60˚ 45˚ 3

stren-flex.com 2

ALLOY CHAIN SLINGS

How to order chain slings:1. Grade 80 or 100 Chain

2. Type of sling

3. Chain size (in.)

4. Reach (Length from bearing

point to bearing point)

PART NUMBERING SYSTEM:

Chain Size(in.)

7/32

9/32

5/16

3/8

1/2

5/8

3/4

7/8

1

1-1/4

7/32

9/32

3/8

1/2

5/8

3/4

90˚ 45˚45˚ 3030˚

Working Load Limit for Angles Available (lb)

60˚60˚

2,100

3,500

4,500

7,100

12,000

18,100

28,300

34,200

47,700

72,300

2,700

4,300

8,800

15,000

22,600

35,300

3,600

6,100

7,800

12,300

20,800

31,300

49,000

59,200

82,600

125,200

4,700

7,400

15,200

26,000

39,100

61,100

3,000

4,900

6,400

10,000

17,000

25,600

40,000

48,400

67,400

102,200

3,800

6,100

12,400

21,200

32,000

49,900

2,100

3,500

4,500

7,100

12,000

18,100

28,300

34,200

47,700

72,300

2,700

4,300

8,800

15,000

22,600

35,300

5,500

9,100

11,700

18,400

31,200

47,000

73,500

88,900

123,900

187,800

7,000

11,200

22,900

39,000

58,700

91,700

4,400

7,400

9,500

15,100

25,500

38,400

60,000

72,500

101,200

153,400

5,700

9,100

18,700

31,800

47,900

74,900

3,200

5,200

6,800

10,600

18,000

27,100

42,400

51,300

71,500

108,400

4,000

6,400

13,200

22,500

33,900

53,000

SINGLE (1 LEG) DOUBLE (2 LEGS) TRIPLE (3 LEGS) & QUAD (4 LEGS)*

G r a d e 8 0

G r a d e 1 0 0

* Quad leg slings do not typically sustain the load evenly on each of its four legs. Therefore, the maximum working load limits are set the same as triple

leg slings.

Type SOS

Sling Hook

Type SOG

Grab Hook

Type SOF

Foundry Hook

Type SOL

Lodelok Hook

Adjustable

Style A

Adjustabl

Style B

D O G A - 10 04Number of Legs

S = Single

D = Double

T = Triple

Q = QuadC = Choker

Master Link

O = Oblong

Types of Hooks

S = Sling Hook

G = Grab Hook

F = Foundry Hook

L = Lodelok Hook

Style

Blank = Standard

A = Style A Adjustable

B = Style B Adjustable

Reach

3' & up

Size

35 = 7/32"

45 = 9/32"

5 = 5/16"

6 = 3/8"8 = 1/2"

10 = 5/8"

12 = 3/4"

14 = 7/8"

16 = 1"20 = 1-1/4"

R e a c h

R e a c h

R e a c

h

R e a c

h



A B

C

Flat

H

L

R R

P

D

G G

L

H

M

M

D

P

O

I

I

B

N

G

K

D

E

P

M O

L

H

S

stren-flex.com 2

ALLOY CHAIN ATTACHMENTS: G80

Clevlok Sling Hook • Available with and without a latch

• Quench and tempered alloy steel

• CM's clevlok head design

• 100% proof tested

• Fatigue rated

• Replacement pin and latch kit available

Eye Sling Hook • Available with and without a latch



• Fatigue rated

• Replacement latch kit available

Size(in.)

Size(in.)

Working Load Limit (lb)

WorkingLoad Limit

(lb)

Latch Kit Part #

Latch Kit Part #

Weight w/o latch

(lb)

Weigh w/o latc

(lb

HookPart #

HookPart #

D

B

G

D

H

E

I

G

P

L

R

M N O P S

L

H

M

I

O

K

9/323/8

1/2

5/8

3/4

7/32

9/32

3/8

1/2

5/8

3/4

7/8

1

1-1/4

595523595525

595528

595529

595530

595461

595523

595525

595528

595529

595530

595532

595533

595535

3.504.34

5.50

6.28

7.83

-

1.63

2.06

2.63

3.06

3.50

3.88

4.31

5.31

5.166.67

8.00

9.69

11.69

3.31

3.50

4.33

5.50

6.34

7.83

8.59

9.59

11.56

0.330.45

0.59

0.75

0.88

1.44

1.50

1.88

2.25

2.63

3.00

3.38

4.00

4.66

0.730.95

1.17

1.44

1.69

4.30

5.25

6.64

8.16

9.66

11.38

12.72

14.23

17.00

1.211.45

1.75

2.19

2.56

0.75

0.75

0.94

1.13

1.31

1.50

1.69

1.88

2.31

3.444.53

5.27

6.08

7.34

3.06

3.75

4.78

5.69

6.50

7.81

8.75

9.88

11.50

1.25

1.19

1.44

1.78

2.03

2.50

2.78

3.13

3.88

1.00

1.20

1.45

1.94

2.38

2.83

3.22

3.55

4.25

0.86

1.05

1.28

1.66

2.19

2.51

2.84

3.09

3.89

1.11

1.06

1.31

1.63

1.75

2.19

2.38

2.88

3.41

1.202.30

4.33

8.10

12.70

0.6

1.1

1.9

4.3

7.3

12.5

18.1

22.6

47.0

0.360.51

0.63

0.75

0.91

0.38

0.44

0.56

0.75

0.88

1.00

1.09

1.22

1.50

1.191.47

1.78

2.03

2.50

0.78

0.73

0.95

1.17

1.44

1.69

1.94

2.14

2.62

0.811.09

1.28

1.44

1.75

1.25

1.59

2.19

2.56

2.63

3.44

3.88

4.25

4.64

3,5007,100

12,000

18,100

28,300

2,100

3,500

7,100

12,000

18,100

28,300

34,200

47,700

72,300

658338658339

658340

658341

658342

458544

458722

458725

458728

458729

458730

458732

458733

458735

Dimensions (in.)

Dimensions (in.)

Master Link with Flats• Designed to accept HA 800 Chain, Wire Rope and Synthetic Webbing

• Use with mechanical and welded chain assemblies

• Sizes up to 1-1/4" available with flats to accomodate Omega link

Nominal Dim. (in.)

Size(in.)

Working

Load Limit(lb) Part # Material Dia. A Inside LengthB Inside WidthC Weight (lb) Single(in.) Double(in.)

7/16

1/2

5/8

3/4

7/8

1

1-1/4

1-1/2

1-3/4

2

2-1/4

2-1/2

0.437

0.512

0.625

0.750

0.875

1.000

1.250

1.500

1.750

2.000

2.250

2.500

0.50

0.80

1.34

2.36

3.60

5.20

9.60

16.20

25.10

38.40

54.60

74.90

7/32 & 9/32

-

3/8

1/2

-

5/8

3/4 & 7/8

1

-

1-1/4

-

-

-

7/32

9/32

3/8

-

1/2

5/8

3/4

7/8

1

-

1-1/4

4,200

5,750

9,000

14,200

17,300

26,500

37,400

53,000

72,150

94,200

119,200

147,150

4.130

4.838

5.292

6.611

7.350

7.526

9.261

11.025

12.863

14.700

16.538

18.375

ML040

ML050

ML063

ML075

ML087

ML100

ML125

ML150

ML175

ML200

ML225

ML250

2.294

2.688

2.977

3.719

4.135

4.301

5.292

6.300

7.350

8.400

9.450

10.500

Type & Size of Chain Sling


• Extra wide body for Wire Rope application



B

H

GK

E

P

D

M

L

I

H B

L

N R (Spher.)

KE

D (Ref)

O

G (Ref)M

I

T

G

P

K

D

E

L

M

H

B

stren-flex.com 2


Clevlok Cradle Grab Hook • CM's unique cradle grab design


• Fatigue rated

• Replacement pin available

Eye Cradle Grab Hook • CM's unique cradle grab design



• Fatigue rated

Eye Foundry Hook • Throat opening up to 6"


• Fatigue rated to Grade 80 specifications

Size(in.)

Size(in.)

Size(in.)

Part #

Part #

Part #

WorkingLoad Limit

(lb)

WorkingLoad Limit

(lb)

WorkingLoad Limit

(lb)

Weight(lb)

Weight(lb)

Weight(lb)

B

B

B

D

D

D

E

E

E

G

G

G

M

L

L

P T

M

M N O

P

R

H

H

H

K

I

I

L

K

K

9/32

3/8

1/2

5/8

3/4

7/32

9/32

3/8

1/2

5/8

3/4

7/8

1

1-1/4

9/32

3/8

1/2

5/8

3/4

7/8

1

1-1/4

1.31

1.81

2.16

2.69

3.09

1.19

1.38

1.78

2.28

2.75

3.19

3.75

4.31

5.38

1.56

2.00

2.50

3.00

3.50

4.00

4.50

5.13

1.78

2.56

3.25

4.08

4.91

1.75

1.91

2.78

3.63

4.41

5.23

5.69

7.00

8.25

4.75

5.75

6.75

7.81

9.13

10.14

11.13

12.84

.359

.469

.594

.750

.875

0.36

0.36

0.47

0.59

0.75

0.88

1.00

1.19

1.50

2.50

3.00

3.50

4.00

4.50

5.00

5.50

6.00

3.00

4.08

5.27

6.53

7.88

2.69

3.70

4.81

6.19

7.62

8.99

9.63

12.44

15.56

6.45

7.88

9.38

10.97

12.81

14.23

15.84

18.03

1.63

2.11

2.88

3.56

4.25

0.63

0.63

0.78

1.03

1.25

1.44

1.75

1.88

2.25

0.63

0.75

1.00

1.13

1.50

1.75

2.13

2.38

0.72

1.06

1.28

1.59

1.88

1.19

1.75

2.13

2.50

3.13

1.63

2.57

3.28

4.22

5.06

6.25

6.50

8.09

10.50

4.75

5.75

6.88

8.06

9.25

10.38

11.56

12.88

2.50

3.00

3.50

4.00

4.50

5.00

5.50

6.00

1.23

1.50

1.75

2.03

2.56

2.78

3.03

3.81

0.7

0.76

1.04

1.51

1.80

1.88

2.12

3.12

3.50

0.25

0.31

0.38

0.44

0.50

0.56

0.62

0.75

0.44

1.18

2.70

4.60

10.24

0.35

0.55

1.06

2.00

5.40

9.00

10.40

20.90

40.00

2.4

4.5

7.1

11.6

20.0

26.0

36.8

58.4

0.33

0.45

0.59

0.75

0.88

0.38

0.38

0.50

0.63

0.75

0.88

1.00

1.22

1.56

0.47

0.63

0.75

0.88

1.00

1.13

1.25

1.38

0.98

1.41

1.88

2.38

2.84

1.19

1.06

1.38

1.81

2.13

2.88

3.00

3.88

2.50

1.00

1.27

1.50

1.81

2.20

2.25

2.59

3.17

0.36

0.51

0.63

0.75

0.91

0.96

1.04

1.49

1.98

2.39

3.50

3.75

4.31

5.50

1.56

1.88

2.22

2.63

3.00

3.38

3.75

4.25

659222

659225

659228

659229

659430

559318

559325

559337

559350

559362

559575

559387

559100

559124

474498

474499

474500

474501

474502

474503

474504

474505

3,500

7,100

12,000

18,100

28,300

2,100

3,500

7,100

12,000

18,100

28,300

34,200

47,700

72,300

3,500

7,100

12,000

18,100

28,300

34,200

47,700

72,300

Dimensions (in.)

Dimensions (in.)

Dimensions (in.)



H J

K

M

GR

L

P

D

A

G H

JE

D

F

B

C

stren-flex.com 2


Clevlok Style Lodelok Hook • High cycling, long life spring

• Factory replaceable pins

• "I" beam construction for greater strength


• Fatigue rated to grade 100 specifications

Eye Style Lodelok Hook • Large eye design for use with chain, wire rope

and synthetic material

• Factory replaceable pins


• Fatigue rated to grade 100 specifications

• For welded 7/32" Chain Sling use 9/32"

Eye Lodelok Hook

Size(in.)

Size(in.)

WorkingLoad Limit

(lb)

WorkingLoad Limit

(lb)

ProductCode

ProductCode

ReplaceLatch Kit

Part #

ReplaceLatch Kit

Part #

D

A

G

B

H

C

J

D

K

E

L

F min

M

G

P

H

R

J

Weight (lb)

Weight (lb)

9/32

3/8

1/2

5/8

9/32

3/8

1/2

5/8

3.89

5.03

6.68

8.04

2.00

2.50

3.44

3.94

6.37

8.20

10.07

11.62

1.31

1.78

2.38

2.62

0.35

0.47

0.59

0.71

5.43

7.41

9.38

10.71

1.00

1.16

1.50

1.74

1.00

1.25

1.75

2.00

4,300

8,800

15,000

22,600

4,300

8,800

15,000

22,600

616005

616010

616015

616020

626005

626010

626015

626020

656005

656010

656015

656020

656005

656010

656015

656020

Dimensions (in.)

Dimensions (in.)

1.19

1.25

1.63

1.88

3.89

5.03

6.68

8.04

0.36

0.51

0.63

0.75

1.563

2.250

2.813

3.125

1.56

2.25

2.81

3.19

1.47

2.00

2.59

2.92

1.00

1.25

1.75

2.00

0.63

0.75

1.00

1.25

4.68

6.11

7.25

8.36

1.19

1.25

1.63

1.88

2.62

4.93

9.32

14.70

2.64

4.86

10.46

16.52

Other Attachments Available:

Swivel Style Lode-

lok Hook

Sorting Hook Sorting Hook

w/ Handle

"S" HookPlate Hook Specialty Hooks



B

FF

G G

E

E

DHA

SlingWidth

Fabric Length

Usable Length for Choker Hitch

Overall Sling Length

Usable Length for Basket Hitch

stren-flex.com 2

WIRE MESH SLINGS

Wire Mesh Sling Inspection CriteriaMetal mesh slings shall be immediately removed from service if any of the following conditions are present:

• Twist or stretch of either handle.

• A 15% reduction of the original cross sectional area of metal at any point around the handle eye.

• Lack of flexibility caused by damage to the mesh fabric.

• 25% reduction in mesh wire diameter due to abrasion and 15% reduction in mesh wire diameter due to corrosion.

• Broken welds or joints on the body or edge of the sling.

• Any broken wires.

Note: All Stren-Flex® wire mesh slings —whether new or repaired— are tested and certified before delivery to the customer.

A Width(Nom.)

Sling Width(in.)

Hook Size(ton)

Approx.Weight of

3' Sling B C

Vertical

D E

Choker

F HG-35

10 GaugeG-43

12 GaugeG-59

14 GaugG

Vertical Baske

DD

2

3

4

6

8

10

12

14

16

18

20

2

3

4

6

8

10

12

14

16

18

20

1/2

3/4

3/4

1

1-1/4

1

1

1-1/4

1-1/4

2

2

1,600

3,000

4,400

6,600

8,800

11,000

13,200

15,400

17,600

19,800

22,000

2-3/4

3-1/2

3-1/2

4

5-1/2

5

5

5

5

5

5

1-3/4

2-1/2

2-1/2

2-3/4

4

3-1/2

3-1/2

3-1/2

3-1/2

4

4

3,200

6,000

8,800

13,200

17,600

22,000

26,400

30,800

35,200

39,600

44,000

4

5-1/4

6-1/4

8-1/2

11-1/4

12-3/4

14-3/4

17

19

21-1/4

23-1/4

3-3/4

5

5

6

8-1/2

7-1/2

7-1/2

7-3/4

7-3/4

11

11-1/4

5

10

10

15

25

25

30

30

30

30

30

5

8

10

15

20

26

33

37

44

51

58

1.25

1.88

2.50

3.88

5.13

3.38

7.63

8.88

10.13

11.38

12.75

1.13

1.75

2.25

3.38

4.50

5.63

6.75

7.88

9

10.13

11.25

.75

1.13

1.50

2.25

3.0

3.75

4.50

5.25

6

6.75

7.50

4

5-1/4

5-1/2

6-1/2

8-3/4

7-3/4

8

8-1/4

8-1/4

8-1/2

8-1/2

2

3

4

6

8

10-1/4

12-1/4

14-1/4

16-1/4

18

20

6

7-1/2

7-3/4

9

12

10-3/4

11-1/4

12

12-1/2

13-1/4

14

1,600

3,000

4,400

6,600

8,800

11,000

13,200

15,400

17,600

19,800

22,000

Length (in.)

Capacity

Fabric lbs/ft of Length

NOTE: Accommodates most hooks to listed size. Standard tolerance + or - 1/2”.

Type 1 pictured above.

Type 2 is fabricated with a male fitting each end and is used exclusively in a basket hitch.

Wire Mesh Slings combine the flexibility, choking capabilities and stability

of a synthetic sling with the abrasion and heat resistant characteristics of a

chain sling. Wire Mesh Slings are available in three gauges of wire thickness

and widths ranging from 20” through 2”. Whether new or repaired, every sling

is stamped with serial number and working capacity and is proof tested and

certified. Stren-Flex® fabricates and repairs all sizes of chain mesh slings.

Ordering Specifications for Wire Mesh Slings:

• Gage of wire mesh

• Type of sling — end fittings

• Width of sling — width of wire mesh

• Length of sling

HEAVY DUTY MESH (10 GAGE)The most popular size of mesh. Toug

against abrasion and sharp edges. Grad

35 - 1/2” Thick





INSPECTION REFERENCE

Wire Rope Sling Removal CriteriaWire rope, and wire rope slings should be removed from service upon

observation of any of the following conditions:

1) Ten randomly distributed broken wires in one rope lay, or five broken

wires in one strand of one rope lay.

2) Kinking, crushing, birdcaging, core damage or any other damage

resulting in distortion of the wire rope structure.

3) Evidence of heat damage.

4) Cracked, deformed, or worn end attachments.

5) Hooks that have been opened more than 15% of the normal throat

opening measured at the narrowest point or twisted more than 10°

from the plane of an unbent hook.

6) Missing or illegible sling identification.

7) Corrosion of rope or end attachments.

8) Eye/Eye slings: Min. of 10 times the rope diameter between sleeves.

9) Grommet slings: Min. of 96 times the rope diameter.

10) Extensive wear (greater than 1/3 of outside wires).

Alloy Chain Slings Removal Criteria 1) Missing or illegible sling identification.

2) Bent, twisted, cracked, stretched or otherwise deformed components.

3) Components with severe wear, nicks or gouges.

4) Severe corrosion or pitting.

5) Improperly functioning mechanical components.

6) Stretched or bent links.

7) Broken or non-functional latches (if present.)

8) Hook spread or twist.

9) Makeshift links or fasteners.

10) Broken chain repaired with low carbon links.

11) Heat damage, weld spatter (See table)

Temperature(°F)

Reduction in WLLDuring Exposure

PermanentReduction in WLLafter Exposure

-40 - 400

400 - 500

500 - 600

600 - 700

700 - 800

800 - 900

900 - 1000

>1000

None

5%

10%

20%

25%

35%

40%

None

None

None

None

10%

25%

30%

Remove from service

10. Low carbon li

in sling body

1. Missing

identification

2. Bent links 4. Severe corrosion 6. Stretched links 8. Hook spread

or twist

3. Severe wear

1. Broken

wires

2. Crushing,

core damage

3. Heat

damage

8. Insuf ficient

space between

sleeves

6. Missingidentificatio

9. Length lessthan 96 times

diameter

10. Extensiveouter wire

wear

4. Deformed

end fittings

5. Stretched and

twisted hooks

7. Corrosion,

rust

EFFECT OF HEAT ON CHAIN



STREN-FLEX®

Documents

Stren Flex Wire Rope Catalog