Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
STRAINERS
STRUCTURE
The structure is simple. It has a body, element (wire mesh and perforated plate)which filters out incoming particles, and a cover or cap.The mesh size of the Wire Mesh depends on the size of the particles to be filtered.Strainers are, in general, of 10, 20, 30, 40, 60, 100 or 200 mesh, and the openingsize of the hole in perforated plate utilized would usually be 3mm, 4mm, 6mm,8mm or 10mm.
As dimension (body size) of the strainers in casting and forging are not flexible,and size is already fixed, selecting 200 or finer mesh will require extra caution as the ratio of element’s open area will decrease, resulting in higher pressure drop and lower level of flow.
Effective open area shall be guaranteed in the element. It may require 5~7 times larger surface area of element, depending on the mesh count and the mesh wire diameter, so that it can secure 3~3.5 times larger open area than the inlet nozzle cross sectional area.
A blow-down valve can be installed on the cap of the strainer in order to clean particles off of the element easily.Take caution when setting the strainer up in front of a cooling-tower pump. Huge amount of particles collected may result in low level of flow and formation of cavitations.
FUNCTION
Strainers are installed on gas or liquid pipelines to protect equipments from foreign particles such as rust, scale,weld slag and sand.
It is usually installed upstream of equipments such as pumps, flow meters, various control valves, steam traps, spray nozzles and turbines.It can also be installed on heat exchangers, if necessary.
FUNCTION / STRUCTURE
MATERIALS
Carbon Steel ASTM : A105, A216, A53, A234, A106, A516 KS : SCPH2, SPPS, SPHT, SB42, S25C
Stainless Steel : A182, A351, A312, A403, A240Alloy Steel and Special Steel :
Monel, Hastelloy, Aluminium, Bronze, Copper Alloy, Chrome Steel, etc.
INTERNAL ELEMENTS
Element is a very important part of the strainers.Material compatibility, flow rate, filtration efficiency and strength shall fully be consideredwhen designing the elements, and should be constructed in a structure which is able to preventbypass of any non-filtered fluid through the gap between element and the body.
We provide highly reliable strainers with accumulated experiences and know-howsin this field of filtration and separation, which can not be compared with others.
END CONNECTION
- Flange Type- Socket Weld Type- Screw Type ( PT & NPT )- Butt Weld Type
APPLICABLE CODES
- ASME - JIS/KS - DIN - API/MSS
APPLICATIONS
TYPE MATERIAL CONNECTION 150# 300# 600# 900# 1500# 2500#
Bucket
Weld CS / SS Flange / Butt Weld
Cast CS Flange
Cast SS Flange
Y-Type
Weld CSFlange
Butt Weld
Weld SSFlange
Butt Weld
Forged CSThread
Flange
Forged SSThread
Flange
Cast CS Flange
Cast SS Flange
T-Type
Weld CSFlange
Butt Weld
Weld SSFlange
Butt Weld
C-Type Weld SS Flange
TYPE
Strainers are classified into Conical Type, T Type, Y Type and Bucket Type.Bucket Types are available in Simplex and Duplex Type.
STRAINER TYPES
This Conical Type Strainer, which consists of element only, is installed between 2 flanges, and does not have housing body.Even after the cleaning the whole process line of newly installed equipments and pipings, there are potential of lots of particles such as weld slag and sand. Sometimes gloves, clothes used during the installation or other foreign matters are present inside the piping network where the fluids run. This “Temporary Strainer” is for use for 6~12 months to filter such matters.
Model No. STR-C001 C1 Type : ½”~ 24” (Rating : 150# ~ 2500#)
Model No. STR-C002 C2 Type : ½”~ 24” (Rating : 150# ~ 2500#)
CONICAL TYPE
① Spacer Ring② Screen③ Perforated Plate④ Handle⑤ Plate
① Spacer Ring② Screen③ Perforated Plate④ Handle⑤ Plate
SIZE L H SIZE L H
½” 66 80 6” 368 185
¾” 92 85 8” 486 215
1” 122 90 10” 608 245
1½” 116 110 12” 725 295
2” 155 115 14” 842 315
2½” 193 135 16” 972 345
3” 232 145 18” 1100 370
4” 306 160 20” 1217 400
5” 306 175 24” 1476 455
SIZE L H SIZE L H
½” 55 80 6” 240 185
¾” 60 85 8” 315 215
1” 80 90 10” 395 245
1½” 90 110 12” 470 295
2” 100 115 14” 545 315
2½” 125 135 16” 630 345
3” 150 145 18” 710 370
4” 200 160 20” 785 400
5” 220 175 24” 955 455
Please contact us for bigger sizes. (Experiences upto maximum 72”)
Please contact us for bigger sizes. (Experiences upto maximum 72”)
Model No. STR-Y001Y-Forging : ½” ~ 2” (Rating : 600#, 1500#)
Y TYPE
Model No. STR-Y001Y-Forging Flanged : ½” ~ 2” (Rating : 600#, 1500#)
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Hex Bolt⑦ Cover
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Hex Bolt⑦ Cover⑧ Flange
SIZE L H
½” 98 97
¾” 98 97
1” 120 114
1¼” 140 137
1½” 140 137
2” 170 152
SIZE L H
½” 172 97
¾” 181 97
1” 200 114
1¼” 217 137
1½” 228 137
2” 278 152
Model No. STR-Y003Y-Welding : 2” ~ (Rating : 150# ~ 2500#)
Y TYPE
Model No. STR-Y002Y-Casting : ½” ~ 12” (Rating : 150# ~ 2500#)
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Seat Plate
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Cover
SIZE L H SIZE L H
½” 160 100 3” 290 220
¾” 160 115 4” 335 320
1” 180 120 6” 520 380
1½” 240 160 8” 580 500
2” 260 170 10” 710 570
2½” 275 185 12” 820 610
SIZE L H SIZE L H
2” 310 245 10” 870 707
2½” 350 265 12” 1030 769
3” 370 365 16” 1220 888
4” 480 375 18” 1310 996
6” 580 486 20” 1490 1060
8” 770 586 24” 1740 1364
Please contact us for bigger sizes in fabrication type.
Model No. STR-T001T1 : 2” ~ 24”
Model No. STR-T001T1 Flanged : 2” ~ 24”
T1 TYPE
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Nozzle Neck
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Nozzle Neck
SIZE L H SIZE L H
2” 285 64 10” 1000 216
2½” 315 73 12” 1160 254
3” 340 86 16” 1240 279
4” 435 105 18” 1630 343
6” 670 143 20” 1780 381
8” 810 178 24” 2100 432
SIZE L H SIZE L H
2” 305 127 10” 990 318
2½” 335 141 12” 1160 368
3” 365 156 16” 1440 432
4” 440 181 18” 1630 483
6” 670 232 20” 1780 523
8” 810 279 24” 2100 584
Please contact us for bigger sizes in fabrication type.(Experiences upto maximum 64”)
Please contact us for bigger sizes in fabrication type.(Experiences upto maximum 64”)
Model No. STR-T002T2 : 2” ~ 24”
Model No. STR-T002T2 Flanged : 2” ~ 24”
T2 TYPE
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Nozzle Neck
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Nozzle Neck
SIZE L H SIZE L H
2” 285 64 10” 1000 216
2½” 315 73 12” 1160 254
3” 340 86 16” 1240 279
4” 435 105 18” 1630 343
6” 670 143 20” 1780 381
8” 810 178 24” 2100 432
SIZE L H SIZE L H
2” 305 127 10” 990 318
2½” 335 141 12” 1160 368
3” 365 156 16” 1440 432
4” 440 181 18” 1630 483
6” 670 232 20” 1780 523
8” 810 279 24” 2100 584
Please contact us for bigger sizes in fabrication type.(Experiences upto maximum 64”)
Please contact us for bigger sizes in fabrication type.(Experiences upto maximum 64”)
Model No. STR-T003T3 : 2” ~ 24”
Model No. STR-T003T3 Flanged : 2” ~ 24”
T3 TYPE
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Nozzle Neck
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Body⑥ Stud Bolt/Nut⑦ Flange⑧ Cover (Blind)⑨ N.P Bracket⑩ Nozzle Neck
SIZE L H SIZE L H
2” 127 220 10” 432 925
2½” 152 275 12” 508 1070
3” 172 325 16” 610 1335
4” 209 420 18” 686 1470
6” 285 580 20” 762 1610
8” 356 715 24” 863 1885
SIZE L H SIZE L H
2” 254 220 10” 636 925
2½” 292 275 12” 737 1070
3” 312 325 16” 864 1335
4” 362 420 18” 966 1470
6” 436 580 20” 1051 1610
8” 560 715 24” 1168 1885
Please contact us for bigger sizes in fabrication type.(Experiences upto maximum 64”)
Please contact us for bigger sizes in fabrication type.(Experiences upto maximum 64”)
BUCKET TYPE
Model No. STR-B001B-Casting : ½” ~ 10” (Rating : 150# ~ 900#)
① Gasket② Screen③ Perforated Plate④ Drain (Plug)⑤ Vent (Plug)⑥ Body⑦ Stud Bolt/Nut⑧ Cover
SIZE L H1 H SIZE L H1 H
½” 160 104 140 3” 355 248 344
¾” 160 111 150 4” 425 286 397
1” 178 132 178 6” 500 410 560
1½” 230 155 211 8” 590 480 685
2” 260 161 222 10” 710 650 870
Model No. STR-B003B-Welding : ½” ~ (Rating : 150# ~ 2500#)
BUCKET TYPE
Model No. STR-B002B-Welding : ½” ~ (Rating : 150# ~ 2500#)
① Gasket ⑪ Seat Plate② Screen ⑫ N.P Bracket③ Perforated Plate ⑬ Lifting Lug④ Drain (Plug) ⑭ Bottom Plate⑤ Vent (Plug)⑥ Body⑦ Stud Bolt/Nut⑧ Flange⑨ Cover (Blind Flange)⑩ Nozzle Flange
① Gasket ⑪ Seat Plate② Screen ⑫ N.P Bracket③ Perforated Plate ⑬ Lifting Lug④ Drain (Plug) ⑭ Bottom Head⑤ Vent (Plug) ⑮ Support Leg⑥ Body⑦ Stud Bolt/Nut⑧ Flange⑨ Cover (Blind Flange)⑩ Nozzle Flange
BUCKET TYPE
Model No. STR-D001D-Casting : 1” ~ 24” (Rating : 150# ~ 900#)
① Gasket ⑪ Cock Handle② O-Ring ⑫ Lifting Handle③ Screen ⑬ Hex Bolt④ Perforated Plate ⑭ Flange⑤ Drain (Plug) ⑮ Cover⑥ Vent (Plug)⑦ Body⑧ Valve Body⑨ Yoke⑩ Cock
SIZE L H1 H SIZE L H1 H
1” 250 150 360 10” 750 840 1630
1½” 270 215 480 12” 760 845 1630
2” 300 220 500 14” 900 900 1700
3” 343 225 546 16” 1000 1000 1750
4” 406 336 765 18” 1050 1050 1800
6” 570 550 1140 20” 1100 1150 1850
8” 580 550 1140 24” 1200 1250 1900
Please contact us for bigger sizes in fabrication type.