Stock Sample 30BBL Brewing System CQ Price: … Capacity / Size Qty Price Each ... • Elliptical head on top ... • Side manway

1020 Pine Island Road, Suite 205, Cape Coral. FL 33909 Phone: (239) 458-4776, Fax: (239) 458-5943, Cell: (314) 280-1447

E-mail: [email protected] , World Wide Web: www.nealhknapp.com 1

Area/Machine Capacity / Size

Qty Price Each

Extended Price

Comments

Brewing Mash tun – dedicated, steam jacketed and insulated

35bbl 1 $16,929 $16,929 Top mounted motor

Transfer Pump – Centrifugal 5000L/H 1 $1,206 $1,206 Lauter tun – dedicated, Insulated

35bbl 1 $28,820 $28,820 Raise/Lower mixer And bottom grain out

Transfer Pump – Centrifugal 5000L/H 1 $1,206 $1,206 Brew Kettle /Whirlpool combination Steam Jacketed & Insulated

30bbl 1 $14,832 $14,832

Transfer Pump – Centrifugal 5000L/H 1 $1,206 $1,206 Wort Cooler 2 stage 28m2 1 $6,380 $6,328 Wort Aerator 1 $655 $655 Work Platform 1 $9,105 $9,105 Price to be

adjusted after layout is complete

Fermentation Fermenters, single shell - 60° Cone Bottom Jacketed & Insulated

60bbl 4 $17,554 $70,216

Fermenters, single shell - 60° Cone Bottom Jacketed & Insulated

30bbl 4 $11,568 $46,272

Transfer Pump – Centrifugal 5000L/H 1 $1,206 $1,206 Bright Tank – Jacked & Insulated

60bbl 1 $17,319 $17,319

Bright Tank – Jacket & Insulated

30bbl 1 $11,830 $11,830

Transfer Pump – Centrifugal 5000L/H 1 $1,206 $1,206 Finishing Hard piped with 304 SS pipe and fittings – please state type of connections, for example

$14,410 $14,410 Final price to be adjusted after layout is complete.

Pricing Detail:

Stock Sample 30BBL Brewing System CQ

Price: $290,969



Tri-Clamp, NPT, etc. Utilities 60 HP Steam Boiler, USA low pressure, Natural gas or LPG fired

60 HP 2070 lbs./Hr.

1 $25,450 $25,450 Includes delivery

Hot Liquor Tank 60BBL 1 $16,572 $16,572 Transfer Pump – Centrifugal 5000L/H 1 $1,206 $1,206 Glycol Tank – Insulated, no jacket

30BBL 1 $10,251 Option

Transfer Pump – Centrifugal 5000L/H 1 $1,206 Option Ice water Tank 90BBL $19,952 Option Ice water Refrigeration System

15HP $10,546 Option

Transfer Pump – Centrifugal 5000L/H 1 $1,206 Option Manufacturer’s Factory set up inspection and water run by Brew-Bev personnel

$4,995 $4,995

AutoCAD services available at a rate of $55 per hour.

TOTAL $290,969 Terms & Conditions: • Freight is ex works manufacturer’s plant in China (D31C40) • Estimated completion: 90 days after date of approval of final drawings. • Delivery: Approximately 25-30 days after completion of equipment. • Terms of Payments: 50% with order; 50% to be paid before shipping • The customer is responsible for unloading, placing the equipment in the plant and

running all utilities to the equipment. • Offer Validity: The offer is good for 60 days



35BBL Mash Tun

Specifications:

• Material: SS 304 construction • Oversized Mash Tun, Top motor • Effective volume:35bbl (1035 Gal) • Mechanical agitation: • Cycloidal reducer, motor • Power: 1.5KW • Thickness of insulating layer: 50mm • Inner Body Thickness: 3mm. • Jacketed • With sparge ring • CIP rotary washing ball • The manhole is 500mm with sight glass • Includes a hydrator • Temperature gauge • Thermowell tube • Dimensions: 1860 x 1860 x 3050 mm



Transfer Pump (8)

Specifications:

• Pump Material: Acid-resistant steel 304 • Pump Finish: Outside: Semi bright • Pump Finish: Inside: Bright ra0.4 • Seals: EPDM rubber • Inlet pressure: Max 0.5Mpa • Temp range: 10 º C to + 140° C • Capacity: 5000Liters/ Hour



35BBL Lauter Tun – Bottom Mixer Raise/Lower and Bottom Grain Out

Specifications:

• Material: SS 304 construction • Bottom motor, Adjustable rake agitator – raise/lower • Bottom Grain Out valve • Effective volume: 35bbl (1085 Gallons) • Mechanical agitation: • Cycloidal reducer, motor • Power: 2.2KW • Thickness of insulating layer: 50mm • Inner Body Thickness: 3mm. • No jacket. But comes with insulation • Wire-electrode cutting False Bottom • With sparge ring • CIP rotary washing ball • The manhole is 500mm with sight glass • Temperature gauge • Thermowell tube • Dimensions: 1860 x 1860 x 3050 mm



30BBL Brew Kettle / Whirlpool

Specifications:

• Material: SUS304 Stainless Steel • Working Volume: 30 barrels (930 gallons, 3520 Liters) • Physical Dimensions: 1800mm L x 1800mm W x 3000mm H • Elliptical head on top • Dish Bottom • Top Manhole • CIP spray ball • One liquid level gauge • One normal 0-150 thermometer • Adjustment leg supports • Inner tank shell thickness 3 mm • Jacket thickness 4 mm • Insulation thickness 75 mm • Outer surface thickness 1.5 mm



28m² Wort Cooler

Specifications:

• Capacity: 3000 liters/hour • Construction Material: 304 Stainless Steel • Heat Transfer Area: 28m² • Cooling or Heating Process: A group of corrugated metal sheets with holes. Heat

transmission takes place between the two fluids passing through these holes on opposite sides of the sheet.

• Gasket Material: Neoprene • Fittings: Tri Clover Clamp or bolted flange



60 Barrel Fermenter:

Specifications:

• Working volume 60 Barrels (1860 gallons, 7041 Liters) • Total Volume: 67.5 Barrels (2093 gallons, 7923 Liters) • 304 stainless steel construction • 60 degree cone bottom (can be customized to customer requirements) • Jacketed • Insulation Thickness: 50 mm • Inner tank thickness 3 mm • Jacket thickness 1.5 mm • Cladding thickness 1.5 mm • Side manway • Sight Glass • Top yeast draw off pipe outlet • Spray ball for CIP • Level gauge • Internal Pressure Rating: 30 PSI Maximum • Number of Jackets: 2 (can be modified to customer’s specs) • Cooling Area (with two jackets): 9 m²



30 Barrel Fermenter:

Specifications:

• Working volume 30 Barrels (930gallons, 3520 Liters) • Total Volume: 33.3 Barrels (1032gallons, 3907 Liters) • 304 stainless steel construction • 60 degree cone bottom (can be customized to customer requirements) • Jacketed • Insulation Thickness: 50 mm • Inner tank thickness 3 mm • Jacket thickness 1.5 mm • Cladding thickness 1.5 mm • Side manway • Sight Glass • Top yeast draw off pipe outlet • Spray ball for CIP • Level gauge • Internal Pressure Rating: 30 PSI Maximum • Number of Jackets: 2 (can be modified to customer’s specs) • Cooling Area (with two jackets): 9 m²



60 BBL Bright Beer Tanks, Jacketed and Insulated

Specifications:

• Outside Diameter: 2200mm • Overall Height: 3779mm • Exterior of tank 2B Plate, interior of tank Mechanical polish, inner body polishing ratio

≦0.6µm • Effective volume is 60bbl, with 10% head space; • Thickness of the inner size: 3 mm; outside: 2mmm; • Carbonation Stone; • Side manhole; • Dual zone dimple cooling jacket with glycol inlet and outlet; • Polyurethane insulation thickness 80mm; with dimple cooling jacket • CIP arm and rotary spray ball • Breathe valve; Pressure gauge & Thermometer & Sample valve. • Four legs with brace and adjustable bolt; • Ribbon polished on welds, fully welded; • With necessary fittings and valves



30 BBL Bright Beer Tanks, Jacketed and Insulated

Specifications:

• Outside Diameter: 1600mm • Overall Height: 3000mm • Exterior of tank 2B Plate, interior of tank Mechanical polish, inner body polishing ratio

≦0.6µm • Effective volume is 30bbl, with 10% head space; • Thickness of the inner size: 3 mm; outside: 2mmm; • Carbonation Stone; • Side manhole; • Dual zone dimple cooling jacket with glycol inlet and outlet; • Polyurethane insulation thickness 80mm; with dimple cooling jacket • CIP arm and rotary spray ball • Breathe valve; Pressure gauge & Thermometer & Sample valve. • Four legs with brace and adjustable bolt; • Ribbon polished on welds, fully welded; • With necessary fittings and valves



Hard Piping

Specifications:

• All 304 stainless steel • Welded elbows and ferrules • Tri-clamp ends • Includes all product pipes and glycol pipes • 1-1/2 inch diameter • Sanitary brewery welds • Manual hand valves unless otherwise specified



60 HP Gas Fired Low Pressure Package Boiler

Specifications: • MODEL NO. : MPH60 • Horsepower : 60 • Gas Input (BTU/hour): 2,520,000 • Oil Input (Gals./hour): 18 • Gross Output (BTU/hour): 2,066,400 • Gross Output Steam (Lbs/hour): 2,070 • Heating Surface - Sq. Ft. – Pipe: 255.0 • Heating Surface - Sq. Ft. – Tube: 221.0 • Furnace Volume - Cu. Ft. : 9.3 • Water Capacity Steam - Gal.: 238 • Steam Volume - Cu. Ft.: 11.2 • Water Capacity Flooded - Gal.: 321 • Qty. & Length of 2” - 13 ga. Tubes: (72)61-1/4” • Hand Hole Quantity & Size: (3) 3x3x3/4 • Standard Burner Electrical: 230/1



60BBL Hot Liquor Tank

Specifications:

• Steam Jacketed and insulated • Inner tank thickness: 5 mm • Jacket thickness: 4 mm • Cladding thickness: 1.5 mm • Volume 60 barrels (1860 gallons) • Quick open top manhole • Thermometer • Spray ball for CIP cleaning • Includes all necessary valves



30BBL Cold Liquor Tank

Specifications:

• Construction: all 304 stainless steel • Glycol Jacketed and Insulated • Tank Size: 30 barrels (930 gallons) • Tank Type: Insulated • Top or bulkhead Manway • Cone top and bottom



15HP Glycol Refrigeration System

Specifications:

• Compressor: Copeland • Compressor Size: 15 HP • Condenser: Copeland • Expansion Valve: DANFOSS Denmark • Manometer: CHANGCHENG China • Electromagnetic Valve: CASTEL Italy • Filter DANFUSS: Denmark • Back Flow Filter: EMERSOM USA • Sight Glass: YESHU Taiwan • Includes all necessary valves pipes and fittings • Control panel



90BBL Cold Liquor Tank

Specifications:

• Construction: all 304 stainless steel • Glycol Jacketed and Insulated • Tank Size: 90 barrels (2790 gallons) • Vertical tank Dimensions: 9.5 feet diameter x 10 feet tall, will not fit in standard shipping

container so will use a flat rack for shipping • Alternative horizontal tank 20.14 feet long by 7.4 feet high overall will fit in standard

shipping container • Tank Type: Insulated • Top or bulkhead Manway • Cone top and bottom



15HP Glycol Refrigeration System

Specifications:

• Compressor: Copeland • Compressor Size: 15 HP • Condenser: Copeland • Expansion Valve: DANFOSS Denmark • Manometer: CHANGCHENG China • Electromagnetic Valve: CASTEL Italy • Filter DANFUSS: Denmark • Back Flow Filter: EMERSOM USA • Sight Glass: YESHU Taiwan • Includes all necessary valves pipes and fittings • Control panel



PLEASE NOTE: The information and pricing data submitted by BREW-BEV in response to the PROSPECTIVE CUSTOMER’S RFP is non-binding and for evaluation purposes only and is subject to adjustment or modification by BREW-BEV after its review, consideration, and negotiation of the terms and conditions of a definitive final contract. In addition, the images and details of the equipment contained in the PROSPECTIVE CUSTOMER’S RFP is for evaluation purposes only and subject to adjustment or modification prior to a definitive final contract.

All data and information contained herein and provided by BREW-BEV in response to a PROSPECTIVE CUSTOMER’S RFP is considered confidential and proprietary. The data and information contained herein may not be reproduced, published or distributed to, or for, any third parties without the express prior written consent of BREW-BEV.

Cust o mer ’ s Res po nsi bilit y

The following items are not included in the purchase price. These items will be required to render the system operational, and is the responsibility of the Customer to provide:

• Material handling equipment to unload and set equipment in place. • City water line to brew house and convenience outlets. • Water filtration equipment. (unless specifically included in the quotation price) • Electrical wiring to pumps, solenoids, brew house control panel, fermentation control panel, glycol

refrigeration unit, convenience outlets, portable pump, grist auger. • Services of refrigeration engineer to start-up and service your refrigeration unit. • Glycol for refrigeration system. • Glycol system piping and controls (with exception of solenoids) from refrigeration unit to fermenters and

second-stage heat exchanger (if supplied). • Provision in the system will be made for injection of dissolved oxygen. Oxygen and control are to be

supplied by others. • Lab equipment. • Initial raw material inventories. • Installation of natural gas line to Brew Kettle/Whirlpool. • HVAC ducting for steam vent on Brew Kettle. • Installation of boiler and all related steam and condensate piping valves, etc. • Any engineering analysis to meeting zoning requirements will be the customer’s expense and responsibility.

Terms and Conditions:

1. Brew-Bev manufacturers guarantee all fabricated products shall be free of defects. BREW-BEV DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, INCLUDING WARRANTIES FOR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE GOODS ARE SOLD “AS IS”. The third party manufacturer of the custom equipment is providing the warranty/guarantee to the Customer and is as follows: Parts and materials: Any malfunction of parts or materials that is the fault of the manufacturer that occurs during the first one (1) year period of equipment operation will be repaired or replaced free of charge by the manufacturer. Welding and metal: Any fractures of the welds or metal that is the fault of the manufacturer that occurs during the first three (3) year period of equipment operation will be repaired or replaced free of charge by the manufacturer. 2. Brew-Bev assumes no liabilities created by negligence or subsequent modifications by Customer or other.



3. Brew-Bev reserves the privilege of withdrawing this proposal at any time prior to acceptance. Brew-Bev will not be obliged to honor pricing proposed to a prospective Customer more than 60 days beyond delivery of the proposal. The prices quoted in this proposal are a confidential offer made by Brew-Bev solely to the above named customer. 4. Customer and Brew-Bev do hereby acknowledge and agree the Customer’s order is one for custom manufactured equipment. After the customer signs off and authorizes the final drawings and specifications to be submitted to the third party manufacturer, it is the Customer’s risk that the equipment does not perform to Customer’s expectations and Brew-Bev is absolved of any financial responsibility for any corrective measures and/or replacement of the equipment.

During the construction of equipment, Brew-Bev may find it desirable or necessary to make modifications that were not foreseen during initial design of the equipment. Such modifications may be for improvement of product safety, function or durability and the Customer will be informed of any significant changes to the design. Where readily available, CSA and/or UL approved markings will be used for the electrical motors and gear. However, some of t he electrical motors and electrical gear sold to the Customer may have a CE Mark, which identifies the motors and gear to be in compliance with European laws and directives with respect to safety, health, environmental and consumer protection. In this event, the Customer acknowledges that it has knowingly and voluntarily accepted the electrical motors and gear with CE Mark. 5. Brew-Bev will provide all CAD design and drawings, site plans, layouts, etc. to the Customer and the Customer will be billed at a rate of fifty-five ($55.00) per hour for work performed by Brew-Bev’s CAD Specialist. 6. Delivery of Customer’s equipment is Exworks and the responsibility of arrangement for freight and payment for all shipping costs is borne solely by the Customer. Delivery of the Customer’s equipment to the freight carrier shall constitute delivery to Customer and all risk of loss or damage after delivery and any insurance claims made respective to damage, shall be borne solely by Customer. If the Customer elects to have Brew-Bev arrange for freight and delivery of the equipment to the Customer, Brew-Bev will notify the Customer of the freight costs and Brew-Bev retains all rights regarding insurance claims, including negotiations and settlement that may arise due to risk of loss or damage of the equipment after delivery. Absent an agreement in writing to the contrary, Brew-Bev reserves the right to make deliveries in installments. Delay in delivery of any installment of equipment shall not relieve Customer of (i) its obligation to pay for any installments received prior to such delay and (ii) its obligation to accept and to pay for remaining deliveries. Delivery dates are approximate and not guaranteed. Delivery periods indicated by Brew-Bev shall not begin until all technical matters have been clarified, and final drawings have been signed and approved by the Customer. 7. Brew-Bev shall not be liable for any failure to deliver or perform or for delays in delivery or performance occasioned by causes beyond Brew-Bev’s control, including without limitation, strikes, labor slow-downs, civil unrest, interruptions or shortages in the supply of materials and/or energy, equipment breakdowns, delays in carriers and/or suppliers, governmental actions and/or regulations, fires, floods, tsunamis, earthquakes, tornadoes, and other acts of God. 8. Upon Customer’s submission of this signed proposal, Brew-Bev shall issue an invoice to the Customer subject to the terms and conditions set forth herein and payment terms will be as quoted in Brew-Bev’s proposal. All work performed by Brew-Bev must be paid in full upon completion, and delivery will not be made prior to final payment. 9. Acceptance: Brew-Bev is hereby authorized to complete the work specified in the above proposal, for which I agree to pay the amount specified in said proposal, and according to the terms thereof, I understand and agree to the terms and conditions stated above.

Accepted: Date:

Documents

Stock Sample 30BBL Brewing System CQ Price: … Capacity / Size Qty Price Each ... • Elliptical head on top ... • Side manway