Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
© 2004 Chapman/Leonard Studio Equipment, Inc. Revision 8 - 7/2008
Stinger™ II Jib Arm USER GUIDE
Operational Instructions & Specifications
Stinger™ II Jib Arm
It is Chapman/Leonard’s goal to provide the best camera support equipment with exceptional Customer Service. Therefore, we are compiling this User Guide to aid in
the reordering of Replacement Parts for your Leased Equipment. For any questions regarding this User Guide, please contact
Customer Service at 888-883-6559 or 818-764-6726.
Chapman/Leonard Certified Locations:UK and Europe
Chapman Leonard Studio Equipment, Ltd.
Unit 5 Kingley Park Station Road
Kings Langley, HertsEngland WD4 8GW
01923 265 953
Texas1901 E. 51st Street, Suite 38
Austin, Texas 78723
512-473-0084or 888-758-4826
Fax: 512-473-0042
Louisiana660 Distributors Row Suite C & D
Elmwood Business ParkNew Orleans, LA 70123
888-758-4826
Florida9460 Delegates Drive
Orlando, Florida 32837
888-337-8243 or 407-851-3456
Fax: 407-855-1653
Canada8301 Eastlake Drive
Burnaby, British Columbia V5A 4W2 Canada
866-848-2602or 604-299-0913
Fax: 604-299-0926
MAIN OFFICE12950 Raymer Street,
North Hollywood, CA 91605
888-883-6559 or 818-764-6726
Fax: 818-764-6730 or 818-764-4347
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
1Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
2
CONTENTS
3 Features of the Stinger Jib Arm
4 Transporting
5 Mounting Bases
6 Pedolly Mount
7 Overslung to Underslung Mode
10 Adding/Removing Glide Head
11 Adding/Removing Arm Extensions
14 Configurations
17 Mounting Options
Features of the Stinger II Jib Arm
Tilt Drag Control
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
3Revision 8 - 7/2008
Glide Head
Rigid without the need for a Cabling System
Compatible with Variety of Heads
In this Example: Mounted on a Chapman Hybrid II Plus Camera Dollysee page 17 for other Mounting Options
Pan Drag Control
Mitchell Mount
Removable Slider Weightfor Fine Tune Balancing
Leveling Rod
Item #12550
5, 10 & 25 lbs, Contoured Weights Require Less Space
During Movement
• Comes Assembled (In Full Configuration Upon Request) and Ready for Use Allowing Quick Setup or in its own special Cart for easy transport and storage in the smallest configuration of the arm.• Every Rental comes with all the parts for any configuration.• See Page 14 for all configurations of the Stinger II Jib Arm.• Compact and Lightweight Arm.• Stinger Arm Glide System Allows up to 2 ft. of Horizontal Travel.• Black Anodized Arm for Easy Maintenance.• Works on Super PeeWee IV, Hustler and Hybrid Camera Dollies, along with a Variety of Bases.• Precision Design for Rigidity without the Need for Cabling System.• A Variety of Counter Balance Weights Available from 5 lbs. to 25 lbs.• Precision Design Weights are Contoured and Shaped on a Radius to Follow the Arc of the Arm.• Stinger Arm Glide System has Drag Control.• Cushioned Stops with Dampening Points at Top and Bottom Travel of the Arm.• Fluid Dampening System Resulting in Zero Backlash.• 360 Degree Continuous Pan Travel.• The Stinger Jib Arm has a Maximum Reach of 12 feet (from the Fulcrum).• Works with a Variety of Heads (Including Remote Camera Systems).• Designed to Work within Tight Areas.
Transporting the Stinger II Jib Arm
A Mobile Weight Case with 425 lbs. of Weights comes with every Stinger Jib Arm.
Each Arm comes with four 5 lbs. Weights, two 10 lbs. Weights, and seventeen 25 lbs. Weights.
For One Man Mounting and Assembly,a Mobile Storage Case comes with every Stinger Jib Arm. When in its case, there is space below the stored Stinger Jib Arm that enables rolling a dolly underneath.
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
4
Front
Mobile Storage Base for the Stinger II Jib Arm (with Mitchell Mount.)
Mounting Bases for the Stinger II Jib Arm
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
5Revision 8 - 7/2008
Standard High Post Mount setup.
Hybrid dolly with Center Post kit.
Stinger II Arm in the Cam-Mate configuration.
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.Revision 8 - 7/2008
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.6
Pedolly Mount for the Stinger II Jib Arm
The Pedolly with its column removed and a Center Post Insert attached.
Before mounting the Stinger Jib Arm on the Center Post Insert, all legs MUST be in the 45 degree configuration. This will provide maximum stability for the base.
Use the special Castle Ring Wrench to tighten the Castle Ring.
Overslung to Underslung Mode
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc. Revision 8 - 7/2008
7Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
To switch the Glider from Overslung mode to Underslung mode, begin by removing the Rubber Cover (viewed from below).
Pull down on the Rubber Cover to remove it from the Gliding Head.
Next remove the Locking Ring.
Overslung to Underslung Mode
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.Revision 8 - 7/2008
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.8
Separate the Mitchell Mount Head from the Glider Mechanism.
The Glider Mechanism shown with the Mitchell Mount Head removed.
Position the Mitchell Mount Head below the Glider Mechanism.
Overslung to Underslung Mode
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
Raise the Mitchell Mount Head until its threads become visible above the Glider Mechanism.
Attach the Locking Ring to the Mitchell Mount Head.
Replace the Rubber Cover on the Glider Mechanism. The Glider is now ready to use.
Revision 8 - 7/2008
9Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Adding/Removing the Glide Head
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.Revision 8 - 7/2008
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.10
Whenever extensions are added/removed from the Stinger Jib Arm, the 2 ft. Glider should be removed first. Begin by removing the Indexing Quick Release Pin.
Remove the retaining screw from the 2 ft. Glider while supporting the Glider to prevent it from falling to the ground.
The 2 ft. Glider can now be pulled from the arm.
Adding/Removing Arm Extensions
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc. Revision 8 - 7/2008
11Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
At this point, extensions of the Arm may be safely added or removed.
The Weight Tray Knob (pictured below) for the Weight Tray Rod may be stored on the Arm (pictured at left) when weights are being added or removed.
Before attempting to add or remove an arm extension, remove all weights from the Tray.
Warning! Before adding or removing any section of the Stinger Jib Arm, the front Glider Section MUST first be removed to avoid damaging the arm.
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
12
Adding/Removing Arm Extensions
The Splice Retainer Bar with Cam Lock ensures a tight fit between sections of the arm. This is essential to maintaining the rigidity and stability of the Stinger Jib Arm while in operation.
When attaching an arm section, loosen the Socket Head Cap Screws enough to lift the Splice Retainer Bar over the Screw Cam Lock.
Push down on the Splice Retainer Bar until it is flush against the arm section. The Screw Cam Lock may have to be turned slightly to allow the Splice Retainer Bar to fit properly against the arm.
Tighten the Socket Head Cap Screws, then loosen both Socket Head Cap Screws one full turn. This is enough to allow the fit between the arm sections to be adjusted.
Adding/Removing Arm Extensions
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
13Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
Next, tighten the Screw Cam Lock to draw the arm sections together. Less than half a turn of the Screw Cam Lock is necessary.
As shown here, the visible gap between the arm sections has been eliminated.
The final step is to tighten both Socket Head Cap Screws. Excessive torque is not required.
Disassembling the Stinger Jib Arm sections is simply the reverse of the above procedure.
Warning! Before adding or removing any section of the Stinger Jib Arm, the front Glider Section MUST first be removed to avoid damaging the arm.
R
R
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
14
Stinger II Configurations
MH
= M
axim
um H
eigh
t (Fr
om in
verte
d ca
mer
a M
itche
ll m
ount
to
ba
se. T
otal
hei
ght w
ould
be
in a
dditi
on to
max
imum
hei
ght o
f dol
ly a
rm.)
MR
= M
axim
um R
each
. (As
mea
sure
d fro
m c
ente
r pos
t to
cam
era
Mitc
hell
mou
nt.)
MP
= M
axim
um P
aylo
ad.
BW
= B
ucke
t Wei
ght f
or b
alan
ced
arm
. (N
o Pa
yloa
d.)
BAW
= B
alan
ced
Arm
Wei
ght.
(No
Payl
oad.
)
MO
W =
Max
imum
Ope
ratin
g W
eigh
t of u
nit.
BR
= B
alan
ce R
atio
. (D
eter
min
e th
e w
eigh
t req
uire
d in
buc
ket t
o
bala
nce
a Pa
yloa
d af
ter a
rm h
as b
een
bala
nced
.)U
W =
Uni
t Wei
ght.
MH
= 7
4” (6
’ 2”)
MR
= 8
8” (7
’ 4”)
MP
= 16
6 lb
s.BW
= 1
05 lb
s.BA
W =
308
lbs.
Stin
ger I
I Con
figur
atio
n #1
Stin
ger I
I Con
figur
atio
n #2
Stin
ger I
I Con
figur
atio
n #3
MO
W =
799
lbs.
BR =
2:1
UW
= 2
03 lb
s.
MH
= 8
0” (6
’ 8”)
MR
= 1
00” (
8’ 4
”)M
P =
166
lbs.
BW =
85
lbs.
BAW
= 3
00
lbs.
MO
W =
812
lbs.
BR =
2:1
UW
= 2
15.5
lbs.
MH
= 8
0” (6
’ 8”)
MR
= 1
00” (
8’ 4
”)M
P =
209
lbs.
BW =
65
lbs.
BAW
= 2
84 lb
s.
MO
W =
858
lbs.
BR =
1.7
:1U
W =
219
lbs.
For Configurations not shown in this brochure, or questions regarding a special setup, Please contact a Chapman/Leonard Service Representative.
No
Adde
d Se
ctio
ns
1 Fo
ot S
ectio
n - F
ront
6 In
ch S
ectio
n - R
ear
1 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n - R
ear
126”
Ove
rall
144”
Ove
rall
150”
Ove
rall
R
RR
RR
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
15Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
Stinger II Configurations
MH
= M
axim
um H
eigh
t (Fr
om in
verte
d ca
mer
a M
itche
ll m
ount
to
ba
se. T
otal
hei
ght w
ould
be
in a
dditi
on to
max
imum
hei
ght o
f dol
ly a
rm.)
MR
= M
axim
um R
each
. (As
mea
sure
d fro
m c
ente
r pos
t to
cam
era
Mitc
hell
mou
nt.)
MP
= M
axim
um P
aylo
ad.
BW
= B
ucke
t Wei
ght f
or b
alan
ced
arm
. (N
o Pa
yloa
d.)
BAW
= B
alan
ced
Arm
Wei
ght.
(No
Payl
oad.
)
MO
W =
Max
imum
Ope
ratin
g W
eigh
t of u
nit.
BR
= B
alan
ce R
atio
. (D
eter
min
e th
e w
eigh
t req
uire
d in
buc
ket t
o
bala
nce
a Pa
yloa
d af
ter a
rm h
as b
een
bala
nced
.)U
W =
Uni
t Wei
ght.
Stin
ger I
I Con
figur
atio
n #4
Stin
ger I
I Con
figur
atio
n #5
Stin
ger I
I Con
figur
atio
n #6
MH
= 9
2” (7
’ 8”)
MR
= 1
12” (
9’ 4
”)M
P =
166
lbs.
BW =
90
lbs.
BAW
= 3
13 lb
s.
MO
W =
819
lbs.
BR =
2:1
UW
= 2
22.5
lbs.
MH
= 9
2” (7
’ 8”)
MR
= 1
12” (
9’ 4
”)M
P =
204
lbs.
BW =
65
lbs.
BAW
= 2
92 lb
s.
MO
W =
861
lbs.
BR =
1.7
5:1
UW
= 2
27 lb
s.
MH
= 9
8” (8
’ 2”)
MR
= 1
24” (
10’ 4
”)M
P =
164
lbs.
BW =
90
lbs.
BAW
= 3
25 lb
s.
MO
W =
829
lbs.
BR =
2:1
UW
= 2
35 lb
s.
2 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n - R
ear
2 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n - R
ear
6 In
ch S
ectio
n - R
ear
2 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n - R
ear
6 In
ch S
ectio
n - R
ear
162”
Ove
rall
168”
Ove
rall
180”
Ove
rall
RR
RR
RR
Stinger II Configurations
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
16
MH
= M
axim
um H
eigh
t (Fr
om in
verte
d ca
mer
a M
itche
ll m
ount
to
ba
se. T
otal
hei
ght w
ould
be
in a
dditi
on to
max
imum
hei
ght o
f dol
ly a
rm.)
MR
= M
axim
um R
each
. (As
mea
sure
d fro
m c
ente
r pos
t to
cam
era
Mitc
hell
mou
nt.)
MP
= M
axim
um P
aylo
ad.
BW
= B
ucke
t Wei
ght f
or b
alan
ced
arm
. (N
o Pa
yloa
d.)
BAW
= B
alan
ced
Arm
Wei
ght.
(No
Payl
oad.
)
MO
W =
Max
imum
Ope
ratin
g W
eigh
t of u
nit.
BR
= B
alan
ce R
atio
. (D
eter
min
e th
e w
eigh
t req
uire
d in
buc
ket t
o
bala
nce
a Pa
yloa
d af
ter a
rm h
as b
een
bala
nced
.)U
W =
Uni
t Wei
ght.
Stin
ger I
I Con
figur
atio
n #7
Stin
ger I
I Con
figur
atio
n #8
Stin
ger I
I Con
figur
atio
n #9
MH
= 9
8” (8
’ 2”)
MR
= 1
24” (
10’ 4
”)M
P =
194
lbs.
BW =
75
lbs.
BAW
= 3
14 lb
s.
MO
W =
863
lbs.
BR =
1.8
:1U
W =
238
.5 lb
s.
MH
= 1
04” (
8’ 8
”)M
R =
136
” (11
’ 4”)
MP
= 15
9 lb
s.BW
= 1
00 lb
s.BA
W =
347
lbs.
MO
W =
836
lbs.
BR =
2:1
UW
= 2
46.5
lbs.
MH
= 1
10” (
9’ 2
”)M
R =
148
” (12
’ 4”)
MP
= 13
1 lb
s.BW
= 1
25 lb
s.BA
W =
375
lbs.
MO
W =
811
lbs.
.BR
= 2
.24:
1U
W =
250
lbs.
2 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n - F
ront
1 Fo
ot S
ectio
n (x
2) -
Rea
r
2 Fo
ot S
ectio
n (x
2) -
Fron
t1
Foot
Sec
tion
(x2)
- R
ear
2 Fo
ot S
ectio
n (x
2) -
Fron
t1
Foot
Sec
tion
- Fro
nt1
Foot
Sec
tion
(x2)
- R
ear
186”
Ove
rall
198”
Ove
rall
210”
Ove
rall
The Stinger can be mounted on these Chapman/Leonard products:
+49"(1.25 m)
Hy Hy ®
(With 7.5" Riser)
MAXIMUM PAYLOAD =2,900 lb. (1,316 kg)
325 lb. (148 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 260 lb. (118 kg)
Hustler IV
54"(1.5 m)
MAXIMUM PAYLOAD =750 lb. (340 kg)
505 lb. ( 229 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 465 lb. ( 211 kg)
Hustler
MAXIMUM PAYLOAD =500 lb. (227 kg)
454 lb. (206 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 420 lb. (191 kg)
54"(1.5 m)
Hybrid
461/2"(1.6 m)
(With High Post Kit)
MAXIMUM PAYLOAD =1,900 lb. (862 kg)
501 lb. (227 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 395 lb. (179 kg)
40"(1.4 m)
PeeWee®
(With High Post Kit)
AMAXIMUM P YLOAD =1,100 lb. (499 kg)
386 lb. (175 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 280 lb. (127 kg)
Super PeeWee® IV
591/2"(1.5 m)
AMAXIMUM P YLOAD =350 lb. (159 kg)
391 lb. (178 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 295 lb. (134 kg)
Pedolly ®
41"
(With Center Post Insert)
MAXIMUM PAYLOAD =1,100 lb. (499 kg)
305 lb. (139 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 224 lb. (102 kg)
(1.4 m)
LenCin ®
41"
(With Center Post Insert)
MAXIMUM PAYLOAD =1,100 lb. (499 kg)
245 lb. (111 kg)Operating Weight of Unit =
Minimum Carrying Weightof Unit = 164 lb. ( 75 kg)
(1.4 m)
• Wipe down the rollers each day.
© 2004 No part of this manual may be reproduced or electronically transmitted withoutthe written permission of Chapman/Leonard Studio Equipment, Inc.
17Use a Qualified Operator. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559.
Revision 8 - 7/2008
Virtually Maintenance Free Arm
For Configurations not shown in this bro-chure, or questions regarding a special setup, Please contact a Chapman/Leonard Service Representative.
The reach of the Stinger Jib Arm offers an incredible range of movement.