RFID Reader

PLC

Meter

ESR902W

ESR901W232

Moxa AWK 1100-US (pg 29)

or

(815)433-5100happy to help for 25 years!

WIRELESS 802.11B AND G

27www.bb-elec.com

WIRELESS

26

As the wireless technologies and equipment continue to evolve, B&B Electronics remains committed to be the technology leader andoffer best-in-class equipment for industrial applications. End-to-End solutions with B&B Electronics wired and wireless componentshave proven themselves in the tough world of the factory floor where reliability and cost effective network communication are vital.

Stepping up to wireless?Let B&B Electronics help make the transition to industrial wireless communications

Dis

tanc

esh

ort

lon

g

Which B&B Electronics wireless solution is right for your needs?

Wireless PAN / LAN / MAN Technologies

Thinking back, it has not always been possible, practical, or cost effective torun network cables to every device, sensor or roving unit on the factory floor.Today’s wireless technologies can eliminate physical and cost barriers, offeringa new world of remote communication solutions. Reliable, on-demand communication with control and monitoring down to the individual embedded machine-level sensor is becoming possible with wireless.

As wireless network equipment emerges, interest in the use of wireless withinindustrial environments has surged. But navigating and understanding thetechnical aspects of the various technologies and standards is essential in theselection of suitable wireless equipment for your application.

Selecting the right technology and equipment will ultimately lead to a successfully installed, well-designed, reliable and efficient communication system. The following diagram and chart offers insight into the different wireless standards and applications best suited for each of the new WirelessPersonal Area Networks (WPAN), Local Area (WLAN) and Metropolitan Area (WMAN) Networks applications. These include wireless standards andacronyms such as: 802.15.4 and ZigBee, 802.1a and Bluetooth, WUSB,Proprietary Radio Modems, 802.11 and Wi-Fi and finally 802.16 and WiMAX.

Features• 2.4 GHz IEEE 802.11g DSSS radio • 802.11g provides 100% 802.11b compatibility• Rugged, IP30 enclosure, DIN or panel mount options• Protocols: TCP, IP, ARP, DHCP, HTTP, UDP, ICMP• LEDs provide at-a-glance operational status: power, signal strength, LAN-link, data• Security: WEP (64/128 bit)• Supports TCP server, TCP client, virtual COM • Status indicators: power, link activity, signal strength• Antenna, omni-directional included —

reverse SMA connector

Specifications• Wireless transmission rates (Mbps): 54, 11, 5.5, 2, 1• 12 to 30 VDC, 24 VAC terminal block input• RF power 15 dBm • RJ-45 Ethernet configuration port• Serial data rates: 110 bps to 230.4 kbps• Operating temperature: 0° to 60° C• Dimensions: 6.9 x 5.7 x 2.3 in (17.4 x 14.5 x 5.8 cm)• See page 34 for other antennas, cable and surge arrestor

optional accessories

low highCapacity – Throughput – Power Requirements

Low data rateembedded

Ethernet / computer Compressed video Multi-channel digital video

Proprietary radiopgs 32-33

802.11a & 802.11g Wi-Fipgs 27-29

802.11 pgs 27-29

802.1a Bluetooth

802.15.4&

ZigBeepgs 30-

31

802.16 WMAN / WiMAXWireless Cellular pg 35

Standards & 802.15.4 Wireless Proprietary 802.1a 802.11x 802.16Characteristics & ZigBee USB Radio Modems Bluetooth Wi-Fi WMAN WiMAX

Operation frequency 868 MHz, 2 – 11 GHz 900 MHz, 2.4 GHz b/g – 2.4 GHz 2-11 GHz902-928 MHz, 2.4 GHz 2.4 GHz a – 5.0 GHz

Data rate 20 Kbps, 40 Kbps, 480 Mbps 9.6 Kbps, 19.2 Kbps, 1 Mbps a/b/g - 11 Mbps, 100-500 Mbps250 Kbps 115 Kbps a/g - 54 Mbps

Distance 10-50m 10m 100m – 30km 10m – 100m b/g – 100m 50kma – 50m

Networking Ad hoc, static, Point-to-point Peer-to-peer Ad hoc, Point-to-multipoint Point-to-pointPeer-to-peer Point-to-point Pico net

Point-to-multipoint

Complexity Low Low Medium Medium High Medium

Power consumption Very low Low Medium Medium High High

WUSB

Model No. Description 802.11 Price

ESR901W232 Single-port RS-232 DB9 g/b $349.95ESR901W485 Single-port RS-422/485 g/b 349.95

terminal block

ESR902W Dual-port DB9: one RS-232 only; g/b 449.95one RS-232/422/485

ESR904W 4-Port DB9: two RS-232 only, g/b 649.95two RS-232/422/485

PMAD10 Panel mount adapter (pair) — 4.959FTB6 DB9 to 6-position terminal (pair) — 39.95DR-75-24 DIN rail power supply, 24VDC, 6A — 97.00

ESR904W

Benefits• High performance up to 54 Mbps 802.11g connectivity• Wirelessly connect legacy serial devices to your LAN;

Eliminates cable installation cost• Ease of installation and setup via integrated web server• Remote device monitoring and diagnostics• Ideal for applications requiring virtual COM ports, serial

tunneling, TCP socket, or UDP socket• Scalable and field upgradeable to protect investment

The Vlinx™ family of wireless Ethernet Serial Servers transparently connects, configures, and communicates with serial devices over industry leading 802.11g54Mbps, and 802.11b 11Mbps compatible WiFi wireless connections. For applications where running cable is not an option, the Vlinx™ ESR solution combineswireless data networking with proven asynchronous connectivity. Available in 1, 2,and 4 port versions with support for RS-232, RS-422, and RS-485 interfaces.

The ESR servers have a range of up to 400 meters outdoors and 50 metersindoors. Range can be extended with directional antennas.

WiFi-G

54 MBPS

Performance

WiFi-G

54 MBPS

Performance

Wirelessly connect your legacy serial devices with 802.11

Wired Terminal ESR Family

p10

ESR901W232

CUSTOMIZE ITSEE PAGE 62 FOR DETAILS

NOT EXACTLY WHAT YOU NEED?

>

RFID Reader

PLC

Meter

ESR902W

ESR901W232

Moxa AWK 1100-US (pg 29)

or

(815)433-5100happy to help for 25 years!

WIRELESS 802.11B AND G

27www.bb-elec.com

WIRELESS

26

As the wireless technologies and equipment continue to evolve, B&B Electronics remains committed to be the technology leader andoffer best-in-class equipment for industrial applications. End-to-End solutions with B&B Electronics wired and wireless componentshave proven themselves in the tough world of the factory floor where reliability and cost effective network communication are vital.

Stepping up to wireless?Let B&B Electronics help make the transition to industrial wireless communications

Dis

tanc

esh

ort

lon

g

Which B&B Electronics wireless solution is right for your needs?

Wireless PAN / LAN / MAN Technologies

Thinking back, it has not always been possible, practical, or cost effective torun network cables to every device, sensor or roving unit on the factory floor.Today’s wireless technologies can eliminate physical and cost barriers, offeringa new world of remote communication solutions. Reliable, on-demand communication with control and monitoring down to the individual embedded machine-level sensor is becoming possible with wireless.

As wireless network equipment emerges, interest in the use of wireless withinindustrial environments has surged. But navigating and understanding thetechnical aspects of the various technologies and standards is essential in theselection of suitable wireless equipment for your application.

Selecting the right technology and equipment will ultimately lead to a successfully installed, well-designed, reliable and efficient communication system. The following diagram and chart offers insight into the different wireless standards and applications best suited for each of the new WirelessPersonal Area Networks (WPAN), Local Area (WLAN) and Metropolitan Area (WMAN) Networks applications. These include wireless standards andacronyms such as: 802.15.4 and ZigBee, 802.1a and Bluetooth, WUSB,Proprietary Radio Modems, 802.11 and Wi-Fi and finally 802.16 and WiMAX.

Features• 2.4 GHz IEEE 802.11g DSSS radio • 802.11g provides 100% 802.11b compatibility• Rugged, IP30 enclosure, DIN or panel mount options• Protocols: TCP, IP, ARP, DHCP, HTTP, UDP, ICMP• LEDs provide at-a-glance operational status: power, signal strength, LAN-link, data• Security: WEP (64/128 bit)• Supports TCP server, TCP client, virtual COM • Status indicators: power, link activity, signal strength• Antenna, omni-directional included —

reverse SMA connector

Specifications• Wireless transmission rates (Mbps): 54, 11, 5.5, 2, 1• 12 to 30 VDC, 24 VAC terminal block input• RF power 15 dBm • RJ-45 Ethernet configuration port• Serial data rates: 110 bps to 230.4 kbps• Operating temperature: 0° to 60° C• Dimensions: 6.9 x 5.7 x 2.3 in (17.4 x 14.5 x 5.8 cm)• See page 34 for other antennas, cable and surge arrestor

optional accessories

low highCapacity – Throughput – Power Requirements

Low data rateembedded

Ethernet / computer Compressed video Multi-channel digital video

Proprietary radiopgs 32-33

802.11a & 802.11g Wi-Fipgs 27-29

802.11 pgs 27-29

802.1a Bluetooth

802.15.4&

ZigBeepgs 30-

31

802.16 WMAN / WiMAXWireless Cellular pg 35

Standards & 802.15.4 Wireless Proprietary 802.1a 802.11x 802.16Characteristics & ZigBee USB Radio Modems Bluetooth Wi-Fi WMAN WiMAX

Operation frequency 868 MHz, 2 – 11 GHz 900 MHz, 2.4 GHz b/g – 2.4 GHz 2-11 GHz902-928 MHz, 2.4 GHz 2.4 GHz a – 5.0 GHz

Data rate 20 Kbps, 40 Kbps, 480 Mbps 9.6 Kbps, 19.2 Kbps, 1 Mbps a/b/g - 11 Mbps, 100-500 Mbps250 Kbps 115 Kbps a/g - 54 Mbps

Distance 10-50m 10m 100m – 30km 10m – 100m b/g – 100m 50kma – 50m

Networking Ad hoc, static, Point-to-point Peer-to-peer Ad hoc, Point-to-multipoint Point-to-pointPeer-to-peer Point-to-point Pico net

Point-to-multipoint

Complexity Low Low Medium Medium High Medium

Power consumption Very low Low Medium Medium High High

WUSB

Model No. Description 802.11 Price

ESR901W232 Single-port RS-232 DB9 g/b $349.95ESR901W485 Single-port RS-422/485 g/b 349.95

terminal block

ESR902W Dual-port DB9: one RS-232 only; g/b 449.95one RS-232/422/485

ESR904W 4-Port DB9: two RS-232 only, g/b 649.95two RS-232/422/485

PMAD10 Panel mount adapter (pair) — 4.959FTB6 DB9 to 6-position terminal (pair) — 39.95DR-75-24 DIN rail power supply, 24VDC, 6A — 97.00

ESR904W

Benefits• High performance up to 54 Mbps 802.11g connectivity• Wirelessly connect legacy serial devices to your LAN;

Eliminates cable installation cost• Ease of installation and setup via integrated web server• Remote device monitoring and diagnostics• Ideal for applications requiring virtual COM ports, serial

tunneling, TCP socket, or UDP socket• Scalable and field upgradeable to protect investment

The Vlinx™ family of wireless Ethernet Serial Servers transparently connects, configures, and communicates with serial devices over industry leading 802.11g54Mbps, and 802.11b 11Mbps compatible WiFi wireless connections. For applications where running cable is not an option, the Vlinx™ ESR solution combineswireless data networking with proven asynchronous connectivity. Available in 1, 2,and 4 port versions with support for RS-232, RS-422, and RS-485 interfaces.

The ESR servers have a range of up to 400 meters outdoors and 50 metersindoors. Range can be extended with directional antennas.

WiFi-G

54 MBPS

Performance

WiFi-G

54 MBPS

Performance

Wirelessly connect your legacy serial devices with 802.11

Wired Terminal ESR Family

p10

ESR901W232

CUSTOMIZE ITSEE PAGE 62 FOR DETAILS

NOT EXACTLY WHAT YOU NEED?

>

www.bb-elec.com (815)433-5100happy to help for 25 years!

WIRELESS 802.11B & 802.11G

28 29

ACCESS POINT

Features/Benefits — all models• Wirelessly connect your serial devices with 802.11b technology• Signal strength LED indicator• No need to change COM software (includes COM re-director that is transparent to your application)• DIN mountable with accessory item DRAD35• Transmission rate: 11Mbps max. with auto fallback (11, 5.5, 2, 1 Mbps)• Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, Telnet, DNS, SNMP, HTTP, SMTP• Operation modes: TCP server, TCP client, UDP, Real COM, Pair connection• Utilities: Windows 98, ME, 2000, XP, 2003• Power: 12 to 48 VDC (power supply included)• Serial Interface: RS-232/422/485 (RJ45 connection)• Communicates with host computer up to 100 meters away• Includes power supply

OverviewThe NPort Wireless Serial Device Servers offer wireless networking capabilities to printers, weighing scales, medical equipment, manufacturing machinery, bar code readers, card readers, point-of-sale equipment and other data collection devices. Each serial port isconfigured with RS-232/422/485 making it suitable for use with most serial devices.

802.11b wireless connectivity to serial devicesIn hard-to-wire situations, the NPort Wireless Serial Device Server isthe ideal solution to reduce the number of connection cables. Whenusing Infrastructure Mode or Ad-Hoc Mode, they can communicatewith any host computer via an access point or another NPort WirelessSerial Device Server.

Works with existing software, saving you time and moneyThe NPort Wireless Serial Device Server supports field proven RealCOM/TTY drivers for Windows and Linux systems, ensuring that existing PC software will still work when used with the new Wireless LAN infrastructure. TCP server, TCP client and UDP modes are also supported so that IP-based software (e.g. Telnet) can directly access each device by knowing the IP and TCP port number.

Easy-to-use remote management and configuration toolsThese NPort Wireless Serial Device Servers provide a Windows utilitythat automatically searches and locates the Wireless Serial DeviceServer over the Ethernet network. An easy-to-use Wizard in the webconsole guides you through the entire installation within minutes.

Applications• Industrial automation• Building automation• Factory automation• Point of sale• Kiosk

Wirelessly enable your serial devices using 802.11b/g-to-serial technology

Model No. Description Price

NPORT W2150 1-Port 802.11b to RS-232/422/485 serial server $348.95NPORT W2250 2-Port 802.11b to RS-232/422/485 serial server 398.95NPORT W2004-US 4-Port 802.11b/g to RS-232/422/485 serial server 798.95Optional AccessoriesDRAD35 DIN rail adapter clips (set of two) 4.95CBL-RJ45M9-150 RJ45 to DB9 male 150cm cable 11.95CBL-RJ45F9-150 RJ45 to DB9 female 150cm cable 11.95CBL-RJ45M25-150 RJ45 to DB25 male 150cm cable 11.95CBL-RJ45F25-150 RJ45 to DB25 female 150cm cable 11.95

NPORT W2250

NPORT W2004®

Wirelessly Transmit Sensitive,and Business Critical, Datawith Network SecurityThe introduction of wireless technology into fullynetworked electronic devices creates a new dimension of issues. The significant benefits of wire-less technology often come with potential risk, andchoosing the right product can provide you with

peace-of-mind. The Digi Connect Wi-Sp is theindustry’s first wireless device server to pro-

vide wireless security with WPA2 com-pliant authentication and 802.11i

standards.

®

Additional Features/Benefits —model NPORT W2004 only• Wirelessly connect your serial

devices with 802.11b and 802.11g technology

• Additional protocols: HTTPS, SSH, SNTP

• Serial interface: RS-232/422/485(RJ45 connection) at up to 460.8 Kbps

Features/Benefits

• Compact enclosure design with integrated mounting tabs

• Fully switch-selectable RS-232/422/485 high-speed serial interface

• Flexible 9-30VDC power input

• Wireless 802.11b network interface with data rates up to 11 Mbps

• Industry’s first secure wireless device server solution supporting enterprise-class WPA2/802.11i security

• Easy-to-use Digi plug-and-play firmware offers complete serial-to-network connectivity and unique product customization flexibility

• Strong SSL/TLS encryption with NIST-certified AES encryption for security sensitive environments

• Patented RealPort technology for COM/TTY port redirection and control

Model No. Description Price

DC-WSP-01-S Digi Connect Wi-SP w/power supply $336.95and dipole antenna

Tired of the inconvenience of finding a place to plug into your Ethernet system? Are you ready for the convenience thatcomes from sending your Ethernet packets over the air instead of through a wire? Now you can access your networkresources without having to plug-in or dock into your LAN. B&B Electronics has carefully selected the AWK-1100industrial wireless Access Point to enable wireless users to access network resources wirelessly. AWK-1100 canauthenticate and authorize wireless users by IEEE 802.1X and RADIUS, and communicate with a back-end RADIUS(Remote Authentication User Dial-In Service) server to see if a wireless user is allowed to access the wireless network.

AWK-1100 is rated to operate at temperatures ranging from 0 to 60° C, and is rugged enough for any harsh industrialenvironment. Installation is easy, with either DIN rail mounting or distribution boxes. The DIN rail mounting capability,wide-operating temperature range, and IP30 case with LED indicators make AWK-1100 a convenient plug-and-play,yet reliable solution for your industrial wireless applications. Panel Mount Kit is available.

Model No. Description Price

AWK-1100-US Wireless AP/Bridge/AP Client, 0 to 60º C, US band $598.95EDS-WK Panel mount kit 11.95DR-30-24 DIN rail mount power supply, 24 VDC, 1.5 A power output 47.00

Industrial Ethernet wireless AP/bridge/AP clientAccess all your resources wirelessly

IEEE 802.1X/RADIUSWhen configured for AP/Bridge mode, AWK-1100 can authenticate wirelessusers and distribute encryption keys dynamically by IEEE 802.1X Port-BasedNetwork Access Control and RADIUS (Remote Authentication Dial-In UserService). The following authentication methods are supported: EAP-MD5/EAP-TLS/EAP-TTLS/PEAP.

Watchdog TimerIf the firmware gets stuck in an invalid state, the hardware watchdog timer willdetect the situation and then restart the AWK-1100 automatically, assuring theAWK-1100 will provide continuous service.

WPA (Wi-Fi Protected Access)AWK-1100 supports the WPA standard proposed by the Wi-Fi Alliancewww.wi-fi.org. Both WPA-PSK (Pre-Shared Key) mode and full WPA mode aresupported. WPA is composed of TKIP (Temporal Key Integrity Protocol) andIEEE 802.1X and serves as a successor to WEP for better WLAN security.

Redundant Power InputsAWK-1100 provides two power inputs that can be connected simultaneouslyto live DC power sources. If one of the power inputs fails, the other sourceacts as a backup to provide power automatically.

Wireless Ethernet Serial Servers

p27

Features/Benefits• IEEE 802.11b/g compliant• Redundant 12-45 VDC power inputs or Power-over-Ethernet• Powerful security with WEP, WPA, 802.1x/RADIUS & MAC address filtering• DIN rail mounting (optional panel mount kit)• Case design meets IP30 protection standard• Supports HTTP, DHCP, TCP/IP, RADIUS, DNS, Net Bios, Apple Talk & IPX/SPX• Includes 2 dB antenna (RPSMA connector)

®

Fast EthernetTurbo Ring

Field engineers

Moving process

EDS508pg 21

EDS508pg 21

AWK-1100AWK-1100

EDS508pg 21

//PoE//

www.bb-elec.com (815)433-5100happy to help for 25 years!

WIRELESS 802.11B & 802.11G

28 29

ACCESS POINT

Features/Benefits — all models• Wirelessly connect your serial devices with 802.11b technology• Signal strength LED indicator• No need to change COM software (includes COM re-director that is transparent to your application)• DIN mountable with accessory item DRAD35• Transmission rate: 11Mbps max. with auto fallback (11, 5.5, 2, 1 Mbps)• Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, Telnet, DNS, SNMP, HTTP, SMTP• Operation modes: TCP server, TCP client, UDP, Real COM, Pair connection• Utilities: Windows 98, ME, 2000, XP, 2003• Power: 12 to 48 VDC (power supply included)• Serial Interface: RS-232/422/485 (RJ45 connection)• Communicates with host computer up to 100 meters away• Includes power supply

OverviewThe NPort Wireless Serial Device Servers offer wireless networking capabilities to printers, weighing scales, medical equipment, manufacturing machinery, bar code readers, card readers, point-of-sale equipment and other data collection devices. Each serial port isconfigured with RS-232/422/485 making it suitable for use with most serial devices.

802.11b wireless connectivity to serial devicesIn hard-to-wire situations, the NPort Wireless Serial Device Server isthe ideal solution to reduce the number of connection cables. Whenusing Infrastructure Mode or Ad-Hoc Mode, they can communicatewith any host computer via an access point or another NPort WirelessSerial Device Server.

Works with existing software, saving you time and moneyThe NPort Wireless Serial Device Server supports field proven RealCOM/TTY drivers for Windows and Linux systems, ensuring that existing PC software will still work when used with the new Wireless LAN infrastructure. TCP server, TCP client and UDP modes are also supported so that IP-based software (e.g. Telnet) can directly access each device by knowing the IP and TCP port number.

Easy-to-use remote management and configuration toolsThese NPort Wireless Serial Device Servers provide a Windows utilitythat automatically searches and locates the Wireless Serial DeviceServer over the Ethernet network. An easy-to-use Wizard in the webconsole guides you through the entire installation within minutes.

Applications• Industrial automation• Building automation• Factory automation• Point of sale• Kiosk

Wirelessly enable your serial devices using 802.11b/g-to-serial technology

Model No. Description Price

NPORT W2150 1-Port 802.11b to RS-232/422/485 serial server $348.95NPORT W2250 2-Port 802.11b to RS-232/422/485 serial server 398.95NPORT W2004-US 4-Port 802.11b/g to RS-232/422/485 serial server 798.95Optional AccessoriesDRAD35 DIN rail adapter clips (set of two) 4.95CBL-RJ45M9-150 RJ45 to DB9 male 150cm cable 11.95CBL-RJ45F9-150 RJ45 to DB9 female 150cm cable 11.95CBL-RJ45M25-150 RJ45 to DB25 male 150cm cable 11.95CBL-RJ45F25-150 RJ45 to DB25 female 150cm cable 11.95

NPORT W2250

NPORT W2004®

Wirelessly Transmit Sensitive,and Business Critical, Datawith Network SecurityThe introduction of wireless technology into fullynetworked electronic devices creates a new dimension of issues. The significant benefits of wire-less technology often come with potential risk, andchoosing the right product can provide you with

peace-of-mind. The Digi Connect Wi-Sp is theindustry’s first wireless device server to pro-

vide wireless security with WPA2 com-pliant authentication and 802.11i

standards.

®

Additional Features/Benefits —model NPORT W2004 only• Wirelessly connect your serial

devices with 802.11b and 802.11g technology

• Additional protocols: HTTPS, SSH, SNTP

• Serial interface: RS-232/422/485(RJ45 connection) at up to 460.8 Kbps

Features/Benefits

• Compact enclosure design with integrated mounting tabs

• Fully switch-selectable RS-232/422/485 high-speed serial interface

• Flexible 9-30VDC power input

• Wireless 802.11b network interface with data rates up to 11 Mbps

• Industry’s first secure wireless device server solution supporting enterprise-class WPA2/802.11i security

• Easy-to-use Digi plug-and-play firmware offers complete serial-to-network connectivity and unique product customization flexibility

• Strong SSL/TLS encryption with NIST-certified AES encryption for security sensitive environments

• Patented RealPort technology for COM/TTY port redirection and control

Model No. Description Price

DC-WSP-01-S Digi Connect Wi-SP w/power supply $336.95and dipole antenna

Tired of the inconvenience of finding a place to plug into your Ethernet system? Are you ready for the convenience thatcomes from sending your Ethernet packets over the air instead of through a wire? Now you can access your networkresources without having to plug-in or dock into your LAN. B&B Electronics has carefully selected the AWK-1100industrial wireless Access Point to enable wireless users to access network resources wirelessly. AWK-1100 canauthenticate and authorize wireless users by IEEE 802.1X and RADIUS, and communicate with a back-end RADIUS(Remote Authentication User Dial-In Service) server to see if a wireless user is allowed to access the wireless network.

AWK-1100 is rated to operate at temperatures ranging from 0 to 60° C, and is rugged enough for any harsh industrialenvironment. Installation is easy, with either DIN rail mounting or distribution boxes. The DIN rail mounting capability,wide-operating temperature range, and IP30 case with LED indicators make AWK-1100 a convenient plug-and-play,yet reliable solution for your industrial wireless applications. Panel Mount Kit is available.

Model No. Description Price

AWK-1100-US Wireless AP/Bridge/AP Client, 0 to 60º C, US band $598.95EDS-WK Panel mount kit 11.95DR-30-24 DIN rail mount power supply, 24 VDC, 1.5 A power output 47.00

Industrial Ethernet wireless AP/bridge/AP clientAccess all your resources wirelessly

IEEE 802.1X/RADIUSWhen configured for AP/Bridge mode, AWK-1100 can authenticate wirelessusers and distribute encryption keys dynamically by IEEE 802.1X Port-BasedNetwork Access Control and RADIUS (Remote Authentication Dial-In UserService). The following authentication methods are supported: EAP-MD5/EAP-TLS/EAP-TTLS/PEAP.

Watchdog TimerIf the firmware gets stuck in an invalid state, the hardware watchdog timer willdetect the situation and then restart the AWK-1100 automatically, assuring theAWK-1100 will provide continuous service.

WPA (Wi-Fi Protected Access)AWK-1100 supports the WPA standard proposed by the Wi-Fi Alliancewww.wi-fi.org. Both WPA-PSK (Pre-Shared Key) mode and full WPA mode aresupported. WPA is composed of TKIP (Temporal Key Integrity Protocol) andIEEE 802.1X and serves as a successor to WEP for better WLAN security.

Redundant Power InputsAWK-1100 provides two power inputs that can be connected simultaneouslyto live DC power sources. If one of the power inputs fails, the other sourceacts as a backup to provide power automatically.

Wireless Ethernet Serial Servers

p27

Features/Benefits• IEEE 802.11b/g compliant• Redundant 12-45 VDC power inputs or Power-over-Ethernet• Powerful security with WEP, WPA, 802.1x/RADIUS & MAC address filtering• DIN rail mounting (optional panel mount kit)• Case design meets IP30 protection standard• Supports HTTP, DHCP, TCP/IP, RADIUS, DNS, Net Bios, Apple Talk & IPX/SPX• Includes 2 dB antenna (RPSMA connector)

®

Fast EthernetTurbo Ring

Field engineers

Moving process

EDS508pg 21

EDS508pg 21

AWK-1100AWK-1100

EDS508pg 21

//PoE//

www.bb-elec.com

WIRELESS MESH NETWORK

30

The #1 Factor industrial customers measure when they choose a wireless sensor network is RELIABILITY

4-20 mAcurrentloop node

Ethernetbridge node

RTD node

The atmosphere in a steel plant is absolutely brutal to sensors. Extreme tem-peratures and harsh chemical, metallurgical, and mechanical processes makeany monitoring a challenge. Yet process monitoring is critical to a steel plant’sprofitably. Tough competition in the world steel market holds prices down. Any unexpected maintenance shutdowns reflect directly on the bottom line.

At a point in steel making, electrical current often arcs to the sides of the furnace. This super-heats the furnace wall, sometimes overloading its temperature control mechanism. If the cooling system is allowed to fail, themolten steel could burn through the walls of the furnace in a matter of minutes, allowing molten metal to pour out onto the shop floor, endangeringworkers’ lives and millions in equipment. Then, needless to say, the plantwould be down for a significant period of time.

For one major steel manufacturer, it was critical to find an accurate and costeffective way to monitor and record temperature fluctuations within the waterjackets of their giant furnaces. After much research, they chose Sensicastwireless mesh network temperature sensors.

With 24/7 production, there was almost no downtime to install or replace thesensors. They had to be placed or replaced quickly during a brief cool periodin the melting cycle. Even during these “cool” periods the temperature at thesensor site measures over 125° F! The need for a quick installation, the highheat, and difficult positioning made installing wired sensors impossible. Plus,molten steel splashing around would vaporize any wires it touched!

Simple, traditional wireless monitoring techniques were out, too. Strong magnetic and electrical fields, plus the large masses of steel would interrupttheir transmissions, causing communication outages. In an application where a minute’s delay can mean disaster, this was not acceptable.

Sensicast RTD nodes were placed between the inner and outer walls of thefurnace. They were able to withstand the heat from melting steel, wide tem-perature swings, powerful magnetic fields, water spray, and vibration.

The brutal environment required a flameproof wrap, plastic water barrier andsturdy metal box to protect the sensor. These presented additional challengesfor the wireless signals. But the Sensicast signal was able to punch throughthe protective shielding and relay its sensor data clearly and reliably.

SensiNet smart mesh networking routes data around any temporary troublespots that might occur. Frequency hopping lets the H900 nodes search outthe best channel for clear communication. This insures a constant and accu-rate flow of information to the plant’s maintenance and management teams.

Impressed by the reliable operation of the initial Sensicast monitors, the steelplant has since installed a Sensicast OPC system to deliver data directly tothe PLCs. The company depends on this critical information to handle pre-ventive maintenance more efficiently, eliminating the unscheduled downtimethat can turn a profitable steel plant into a loser.

There are few places more inhospitable to a sensor than an active steel mill.

125° F is the “coolperiod” for Sensicastsensors in a steel mill

The Sensicast system is designed specifically to provide the most reliable wireless communication while minimizing impact on batterylife, making it the ideal solution for wireless applications in harshindustrial environments, such as steel mills.

In a wireless mesh network, reliability is defined as receiving andtransmitting every package. Key requirements include: Robustness of wireless communications; wide Range achieved with a limitednumbers of hops to a destination; Retransmissions enabled by special protocols; and Redundancy supplied by the mesh network.The Sensicast system selected by B&B Electronics is indeed the most reliable wireless communication system, making it the idealsolution for challenging applications such as large or multi-buildingfacilities, even harsh industrial environments like steel mills (see application story below).

While sensor networks have been used for some time in commercialand industrial installations, this proven solution delivers benefits farbeyond those possible with wired approaches. Built on the industry-leading wireless mesh networking technology, this system integratessensors, software and networking devices through a patented meshnetwork technology, into turnkey solutions.

Mesh/router node

(815)433-5100happy to help for 25 years!

WIRELESS MESH NETWORK

31

Wireless Mesh Network New freedom from power wiring and data cabling

• Sensor Nodes – Small, stand-alone, long battery life, wireless nodes connecting a broad range of popular sensor types to the Sensicast wireless mesh network

• Mesh Node – Wireless mesh network repeater that extends the range and coverage area of SensiNet™

• Gateway Software – connects the SensiNet™ network to software applications and the internet

• OnCall – Applications Software

Sensor Nodes – A variety of wireless power and current makes B&B Electronics the “one-stop shop” for your specific monitoring needs: 3-phase- motor power monitoring, steam, compressed air, pressure, energy and flow monitoring and more.

Software Features - Software plus partnerships with leading applicationproviders offers the most robust and feature-rich reporting and alerting solutions, including:• Real-time data • Graphical trending • E-mail / paging alerts • Sensor calibration

Multi-application wireless infrastructure uses centralized monitoring ofvarious sensor node types, all on the same wireless backbone.

Typical Applications• Chemical and Gas Manufacturing: Monitoring for pump failure to reduce or eliminate down-time

• Primary Metals: Monitoring aluminum metal coils cooling temperatures; Monitoring steel melting arc -furnace cooling jacket temperature

• Pharmaceutical Manufacturing: Refrigerator and incubator monitoring for FDA compliance in manufacturing and test labs

• Power Generation: Utilize embedded stator winding slot- RTDs in cooling pumps to defer maintenance activities

• Petroleum Refining: Thermal breakdown monitoring in pumps to determine insulation quality

• Food and Beverage: Monitoring cooling process for baked goods; Temperature control for meat- packing plant

• Chemical and Gas Manufacturing: Monitor current and power consumption of distinct pieces ofmachinery and equipment to generate detailed monthly usage reporting.

Wireless Advantages • Installation is fast, simple, scaleable• 100% connection reliability• No site surveying required • Anywhere/anytime access to sensor network data • Lower total cost of ownership • Flexible multi--application wireless infrastructure • Long range and long battery life • RF interference resistant • Self-forming, multi-hopping• Self-configuring, self-healing

Call 815-433-5100 today forpricing and product availability!!

What components make up this wireless solution?

XT09-PKI-RA

XT09-4II-RA

Pump station

OEM modules

www.bb-elec.com

WIRELESS PROPRIETARY RF

32

Applications• SCADA• Instrumentation• Waste water plants• Oil and gas fields• Homeland security

• Remote monitoring• Building automation systems• Automated teller machines• Point-of-sale terminals• Keyless/remote access systems

MaxStream proprietary RF 900 MHz & 2.4 GHz wireless radio modems for long and short range communications

Common features & benefitsOperation modes: Peer-to-peer, point to multi-point, point-to-point, multi-drop

transparent network, MODBUSConfiguration: AT command line, Windows software

Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)Frequency: ISM Band, 902 to 928 MHz or 2.400 to 2.4385 GHz

Modulation: FSK (Frequency Shift Keying)Antenna: Reverse polarity SMA 2.1 dB 1⁄2 wave dipole (included with

packaged radios unless otherwise specified)Mounting: Panel mountable (OEM solutions use a pin header and standoffs)

Power supply: Included (OEM modules do not include a power supply)

Family specifics:9XTend — Proprietary RF 900 MHzLong range, high bandwidth and secure wireless communications. 256-bit AESencryption — AES algorithm meets Federal Information Processing Standard-197(FIPS-197). Range: Indoors up to 3000 feet with included dipole. Outdoors up to 14miles with included dipole. Outdoors up to 40 miles with optional high gain antenna.• Up to 1 W output power

(1 mW to 1 W — software selectable)• Wide temp -40° to 85° C

24XStream — Proprietary RF 2.4 GHzLong range, low bandwidth wireless communications for worldwide use. Range: Indoors up to 600 feet with included dipole. Outdoors up to 3 miles withincluded dipole. Outdoors up to 10 miles with optional high gain antenna.• 50 mW output power• 0° to 70° C or -40° to 85° C • 9600 or 19200 bps throughput• RS-232/422/485 or USB or Ethernet interfaces (1200 to 57600 bps)

9XStream — Proprietary RF 900 MHzLong range, low bandwidth wireless communications. Range: Indoors up to1500 feet with included dipole. Outdoors up to 7 miles with included dipole.Outdoors up to 20 miles with optional high gain antenna.• 100 mW output power• 0° to 70° C or -40° to 85° C • 9600 or 19200 bps throughput

9XCite — Proprietary RF 900 MHzShort range, low bandwidth wireless communications. Range: Indoors up to300 feet with included dipole. Outdoors up to 1000 feet with included dipole.• 4 mW output power• 0° to 70° C or -40° to 85° C

XPress — Proprietary RF 900 MHz — EthernetLong range, high bandwidth Ethernet bridge (does not have all the commonfeatures and benefits of the other Maxstream products). Range: Indoors up to 2000feet with high gain antenna. Outdoors up to 2 miles with included dipoleantenna. Outdoors up to 15 miles with high gain antenna. NEMA packaged out-door product allows panel mounting, indoor model is designed for the desktop.• 125 mW output power• -40° to 70° C• Ethernet bridge (used in

preconfigured pairs only)• Autocross Ethernet port• 12 unique channels allows up to

12 pairs of radios in one location

Some data communications applications defy cabling. Whether you’re facing long distances, impossible cable routing,or frequent relocation of devices, the simplicity, functionality, andreliability of these wireless solutions is the answer. These radiomodems are easy to install and transparent to use.

Need to reach up to 40 miles? The new 9XTend series of 900 MHz stand-alone RF modems provides outstanding range in low cost wireless radio modems. They are RS-232/422/485compatible. Models are available in an anodized aluminum case,a weatherproof NEMA case, or as a board component for inclusion in your product. This affordable RF modem outperforms others for hundreds of dollars less.

These modems feature market-leading receiver sensitivity downto -110 dBm (market average is -93 dBm). The FCC restricts theoutput power of all radio modems, so it is receiver sensitivity thatgoverns how well a radio modem system works. This range andreliability, offered at a lower price, set these modems apart fromtheir competition.

• Point-to-point communications• 128 bit encryption• Throughput: 935 Kbps• RF data rate: 1.5 Mbps• Direct Sequence Spread Spectrum (DSSS)• Sold in pairs (one price for two units)

• 115 Kbps throughput• RS-232/422/485 (1200 to 230400 bps)• NEMA enclosure option

• RS-232/422/485 or USB or Ethernet interfaces (1200 to 57600 bps)

• 9600 or 38400 bps throughput• RS-232/422/485 (1200 to 57600 bps)

//MODBUS//

Pump station

Pump stationControl building

Wireless modemWireless modem

Wireless modem

Telephone modeminterface & Zigbeewww.bb-elec.com/Maxstream

XT09-PKI-RA

XT09-4II-RA

Pump station

OEM modules

www.bb-elec.com

WIRELESS PROPRIETARY RF

32 (815)433-5100happy to help for 25 years!

WIRELESS PROPRIETARY RF

33

Applications• SCADA• Instrumentation• Waste water plants• Oil and gas fields• Homeland security

• Remote monitoring• Building automation systems• Automated teller machines• Point-of-sale terminals• Keyless/remote access systems

Packaged radios (panel mount and NEMA 4 enclosures)9XStream and 24XStream USB and Ethernet options are designed to work with an RS-232/422/285radio on the other end. Not to be used as a USB or Ethernet bridge. For an Ethernet Bridge Solution seethe XPress family below.

MaxStream proprietary RF 900 MHz & 2.4 GHz wireless radio modems for long and short range communications

Common features & benefitsOperation modes: Peer-to-peer, point to multi-point, point-to-point, multi-drop

transparent network, MODBUSConfiguration: AT command line, Windows software

Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)Frequency: ISM Band, 902 to 928 MHz or 2.400 to 2.4385 GHz

Modulation: FSK (Frequency Shift Keying)Antenna: Reverse polarity SMA 2.1 dB 1⁄2 wave dipole (included with

packaged radios unless otherwise specified)Mounting: Panel mountable (OEM solutions use a pin header and standoffs)

Power supply: Included (OEM modules do not include a power supply)

Family specifics:9XTend — Proprietary RF 900 MHzLong range, high bandwidth and secure wireless communications. 256-bit AESencryption — AES algorithm meets Federal Information Processing Standard-197(FIPS-197). Range: Indoors up to 3000 feet with included dipole. Outdoors up to 14miles with included dipole. Outdoors up to 40 miles with optional high gain antenna.• Up to 1 W output power

(1 mW to 1 W — software selectable)• Wide temp -40° to 85° C

24XStream — Proprietary RF 2.4 GHzLong range, low bandwidth wireless communications for worldwide use. Range: Indoors up to 600 feet with included dipole. Outdoors up to 3 miles withincluded dipole. Outdoors up to 10 miles with optional high gain antenna.• 50 mW output power• 0° to 70° C or -40° to 85° C • 9600 or 19200 bps throughput• RS-232/422/485 or USB or Ethernet interfaces (1200 to 57600 bps)

Transmit Model No. Model No.Family Throughput Power Special Feature 0° to 70° C Price -40° to 85° C Price

9XTend 115 Kbps 1 mW to 1 W 256-bit encryption XT09-PKI-RA $299.959XTend 115 Kbps 1 mW to 1 W NEMA enclosure XT09-4EI-RA 498.959XTend 115 Kbps 1 mW to 1 W NEMA enclosure XT09-4II-RA 498.959XStream 9600 bps 100 mW X09-009PKC-RA $249.95 X09-009PKI-RA 264.959XStream 19.2 Kbps 100 mW X09-019PKC-RA 249.95 X09-019PKI-RA 264.959XStream 9600 bps 100 mW USB interface X09-009PKC-UA 249.959XStream 9600 bps 100 mW Ethernet interface X09-009PKC-EA 349.959XCite 9600 bps 4 mW XC09-009PKC-RA 99.95 XC09-009PKI-RA 114.959XCite 38.4 Kbps 4 mW XC09-038PKC-RA 99.95 XC09-038PKI-RA 114.9524XStream 9600 bps 50 mW X24-009PKC-RA 199.95 X24-009PKI-RA 213.9424XStream 19.2 Kbps 50 mW X24-019PKC-RA 199.95 X24-019PKI-RA 213.9424XStream 9600 bps 50 mW USB interface X24-009PKC-UA 198.9524XStream 9600 bps 50 mW Ethernet interface X24-009PKC-EA 249.95

Transmit Model No. Model No.Family Throughput Power Antenna 0° to 70° C Price -40° to 85° C Price

9XTend 115 Kbps 1 mW to 1 Watt RPSMA XT09-SI $178.959XTend 115 Kbps 1 mW to 1 Watt MMCX XT09-MI 178.959XStream 9600 bps 100 mW RPSMA X09-009NSC $149.95 X09-009NSI 164.959XStream 19.2 Kbps 100 mW RPSMA X09-019NSC 149.95 X09-019NSI 164.959XStream 9600 bps 100 mW MMCX X09-009NMC 139.95 X09-009NMI 154.959XStream 19.2 Kbps 100 mW MMCX X09-019NMC 139.95 X09-019NMI 154.959XStream 9600 bps 100 mW 3 in wire X09-009WNC 137.95 X09-009WNI 152.959XStream 19.2 Kbps 100 mW 3 in wire X09-019WNC 137.95 X09-019WNI 152.959XCite 9600 bps 4 mW RPSMA XC09-009NSC 42.95 XC09-009NSI 49.959XCite 38.4 Kbps 4 mW RPSMA XC09-038NSC 42.95 XC09-038NSI 49.959XCite 9600 bps 4 mW 3 in wire XC09-009WNC 40.95 XC09-009WNI 47.959XCite 38.4 Kbps 4 mW 3 in wire XC09-038WNC 40.95 XC09-038WNI 47.9524XStream 9600 bps 50 mW RPSMA X24-009NSC 98.95 X24-009NSI 113.9524XStream 19.2 Kbps 50 mW RPSMA X24-019NSC 98.95 X24-019NSI 113.9524XStream 9600 bps 50 mW MMCX X24-009NMC 96.95 X24-009NMI 111.9524XStream 19.2 Kbps 50 mW MMCX X24-019NMC 96.95 X24-019NMI 111.9524XStream 9600 bps 50 mW 3 in wire X24-009WNC 94.95 X24-009WNI 109.9524XStream 19.2 Kbps 50 mW 3 in wire X24-019WNC 94.95 X24-019WNI 109.95

Development kits (used for OEM module integration testing)Family Throughput Transmit Power Temp Range Model No. Price

9XTend 115.2 Kbps 1 mW to 1 W -40° to 85° C XT09-DK $498.959XStream 9600 bps 100 mW 0° to 70° C X09-009-DK 408.959XStream 19.2 Kbps 100 mW 0° to 70° C X09-019-DK 408.959XCite 9600 bps 4 mW 0° to 70° C XC09-009-DK 198.959XCite 38.4 Kbps 4 mW 0° to 70° C XC09-038-DK 198.9524XStream 9600 bps 50 mW 0° to 70° C X24-009-DK 408.9524XStream 19.2 Kbps 50 mW 0° to 70° C X24-019-DK 408.95

Transmit Model No. Model No.Family Throughput Power Special Feature Indoor Price Outdoor Price

XPress 935 Kbps 125 mW Ethernet Bridge XEB09-C (pair of two) $698.95 XEB09-I (pair of two) $998.95

OEM modules (board level products)

9XStream — Proprietary RF 900 MHzLong range, low bandwidth wireless communications. Range: Indoors up to1500 feet with included dipole. Outdoors up to 7 miles with included dipole.Outdoors up to 20 miles with optional high gain antenna.• 100 mW output power• 0° to 70° C or -40° to 85° C • 9600 or 19200 bps throughput

9XCite — Proprietary RF 900 MHzShort range, low bandwidth wireless communications. Range: Indoors up to300 feet with included dipole. Outdoors up to 1000 feet with included dipole.• 4 mW output power• 0° to 70° C or -40° to 85° C

XPress — Proprietary RF 900 MHz — EthernetLong range, high bandwidth Ethernet bridge (does not have all the com-mon features and benefits of the other Maxstream products). Range: Indoors upto 2000 feet with high gain antenna. Outdoors up to 2 miles with included dipoleantenna. Outdoors up to 15 miles with high gain antenna. NEMA packaged out-door product allows panel mounting, indoor model is designed for the desktop.• 125 mW output power• -40° to 70° C• Ethernet bridge (used in

preconfigured pairs only)• Autocross Ethernet port• 12 unique channels allows up to

12 pairs of radios in one location

Development Kits

Some data communications applications defy cabling. Whether you’re facing long distances, impossible cable routing,or frequent relocation of devices, the simplicity, functionality, andreliability of these wireless solutions is the answer. These radiomodems are easy to install and transparent to use.

Need to reach up to 40 miles? The new 9XTend series of 900 MHz stand-alone RF modems provides outstanding range in low cost wireless radio modems. They are RS-232/422/485compatible. Models are available in an anodized aluminum case,a weatherproof NEMA case, or as a board component for inclusion in your product. This affordable RF modem outperforms others for hundreds of dollars less.

These modems feature market-leading receiver sensitivity downto -110 dBm (market average is -93 dBm). The FCC restricts theoutput power of all radio modems, so it is receiver sensitivity thatgoverns how well a radio modem system works. This range andreliability, offered at a lower price, set these modems apart fromtheir competition.

• Point-to-point communications• 128 bit encryption• Throughput: 935 Kbps• RF data rate: 1.5 Mbps• Direct Sequence Spread Spectrum (DSSS)• Sold in pairs (one price for two units)

• 115 Kbps throughput• RS-232/422/485 (1200 to 230400 bps)• NEMA enclosure option

• RS-232/422/485 or USB or Ethernet interfaces (1200 to 57600 bps)

• 9600 or 38400 bps throughput• RS-232/422/485 (1200 to 57600 bps)

//MODBUS//

Inquire for lead times.

Pump station

Pump stationControl building

Wireless modemWireless modem

Wireless modem

Telephone modeminterface & Zigbeewww.bb-elec.com/Maxstream

www.bb-elec.com

WIRELESS ACCESSORIES

34 (815)433-5100happy to help for 25 years! 35

WIRELESS CELLULAR

Antenna options

For long range point-to-point applications, use Yagi antennas. Multi-point applications may require a mixture of Yagi and Omni-directional antennas.

Lightning arrestorsWhen installed properly in the feedline, a lightning arrestor can prevent damage dueto lightning strikes. These units are designed with a rugged housing and high qualityplated brass “N” connectors. Bulkhead mounting and connector pass-through.

• Impedence: 50 Ohms (nom.)• Connector 1: N female• Connector 2: N female (bulkhead)

MountingModel No. Frequency Gain Style Connector Dimensions Bracket Price

FG24008 2.4 GHz 8 dB Omni (fiber glass) N female 24 in (60.9 cm) long FM2 $194.95YE240015 2.4 GHz 12.5 dB Yagi N female 18 in (45.7 cm) long Included 244.95FG9023 900 MHz 3 dB Omni (fiber glass) N female 25 in (63.4 cm) long FM2 139.95 FG9026 900 MHz 6 dB Omni (fiber glass) N female 65 in (165.1 cm) long FM2 179.95 YS8963 900 MHz 6 dB Yagi N female 16.8 in (42.7 cm) long Included 69.95 YS8966 900MHz 9dB Yagi N female 27.8 in (70.6 cm) long Included 89.95YS89612 900MHz 11dB Yagi N female 49 in (124.5 cm) long Included 154.95FM2 Brackets for Omni-directional antennas, package of two (used for one antenna) 29.95

Max. Breakdown InsertionModel No. Power Voltage Loss VSWR Protection Price

LABH350NN 1000 W 350 VAC 27 to 500 MHz < 0.1 dB 0 to 150 MHz < 1.1 to 1 5000 A $78.950 to 1 GHz 1000 MHz < 0.25 dB 150 to 1000 MHz < 1.2 to 1

LABH2400NN 70 W 90 to 130 0 to 1 GHz < 0.03 dB 0 to 1 GHz < 1.1 to 1 1 shock = 20 kA 78.950 to 4 GHz VAC 1 to 4 GHz < 0.29 dB 1 to 4 GHz < 1.2 to 1 10 shocks = 10 kA

YS8963

FG24008

FG9023Shown with

optional FM2brackets

FG9026Shown with

optional FM2 brackets

LABH350NN LABH2400NN

Antenna options for longer rangeand special applications

YE240015

Cables to connect optional antennasModel No. Connector 1 Connector 2 Length Material Price

195M-SLSW-24 SMA Reverse polarity plug RPSMA Jack bulkhead 2 ft LMR195 $29.95400M-NMSL-24 SMA Reverse polarity plug N Male 2 ft LMR400 29.95400M-NISL-24 SMA Reverse polarity plug N Bulkhead (female) 2 ft LMR400 32.95400M-NMSL-120 SMA Reverse polarity plug N Male 10 ft LMR400 49.95400M-NMSL-600 SMA Reverse polarity plug N Male 50 ft LMR400 99.95400M-NMTL-24 TNC Reverse polarity plug N Male 2 ft LMR400 29.95400M-NITL-24 TNC Reverse polarity plug N Bulkhead (female) 2 ft LMR400 32.95400M-NMTL-120 TNC Reverse polarity plug N Male 10 ft LMR400 49.95400M-NMTL-600 TNC Reverse polarity plug N Male 50 ft LMR400 99.95400M-NMNM-120 N Male N Male 10 ft LMR400 39.95400M-NMNM-480 N Male N Male 40 ft LMR400 79.95400M-NFNM-120 N Female N Male 10 ft LMR400 39.95400M-NFNM-480 N Female N Male 40 ft LMR400 79.95

Cellular Gateway/Router/VPN for Ethernet and Serial Data

Benefits• Ethernet and serial over cellular network• RS-232/422/485 support • LEDs for Ethernet: power on, celluar link/activity, signal

strength• Easy-to-use web interface and set-up wizard• Security: SSL, SSH v.2, FIPS 197, HTTPS • Router/Firewall features: NAT, port forwarding, VPN

pass-through, access control lists (IP filtering) • Extended temperature range (-30º to 60º C CDMA)

(-30º to 70º C GSM)• Includes power supply, 0º to 60º C

(excluded Connect WAN IA)• Optional -35º to 70º C power supply • Includes dipole antenna• “SureLink” always-on maintains wireless connections • RealPort - COM redirection software

GSM models• Quad band 1900/850 and 1800/900 MHz • EDGE class 10, GPRS class 12 • Throughput up to 240 Kbps, 100-130 Kbps typical • Certified networks: Cingular, Rogers Wireless, Midwest Wireless

CDMA models• 800 MHz cellular, 1900 MHz PCS • 1 x RTT • Throughput up to 153 Kbps, 60-80 Kbps typical • Certified networks: Sprint, Verizon, Centennial Wireless, Alltel Wireless

Connect WAN VPN (all Benefits plus)• Integrated IPSec VPN (AES, DES, 3DES)• IKE/ISAKMP

Connect WAN IA (all Benefits plus)• DIN rail mounting bracket included• Class 1 Division 2• Modbus support• 9 to 30 VDC power input via terminal blocks

Three Easy Steps to Successful Cellular Data Communications

1. Understand your application

2. Select the hardware thatbest suits your needs

3. Activate the hardware with a cellular data plan

Model No. Family Network Price

DC-WAN-G510 Connect WAN IA Sprint $797.95DC-VPN-S1XA Connect WAN VPN Sprint 797.95DC-WAN-S1XA Connect WAN Sprint 734.95DC-WAN-D311 Connect WAN VPN Verizon 797.95DC-WAN-C111 Connect WAN Verizon 734.95DC-WAN-D316 Connect WAN VPN Alltel 797.95DC-WAN-C116 Connect WAN Alltel 734.95

CDMA models

Model No. Description Price

76000682 DIN mount bracket $27.9576000717 Extended temp power supply (-35 to 70 °C) 80.95DR-30-24 DIN power supply 24 VDC at 1.5 A output 47.00

SCADA or MeteringApplication

Central Office

Internet/Frame Relay

CellularWirelessNetwork

Ethern

et

Serial

PLC

Digi Connect® WAN IA

RESET

9-30V DC

375mA MAX

STATUSPWR

ETHERNETACT

LINK

Connect WAN IA

SIGNAL

STRENGTH

LINKACT

SERIAL

OverviewThe Digi Connect WAN family of commercial-grade wireless WAN cellularrouters, gateways and VPN appliances provide secure high-speed wirelessconnectivity to remote sites and devices. These cellular products selected by B&B Electronics can be used for reliable primary wireless network connectivity to equipment at remote locations, as well as for a backup toexisting land-line communications. Ideal where wired networks (e.g., leased line/frame relay, ISDN, DSL) are not feasible.

Optional Digi Connectware Manager software management suite provideseasy setup, configuration, and maintenance of large installations. Users canupgrade firmware, or change settings on thousands of devices with only afew clicks. It makes troubleshooting simple by identifying rogue devices, ornetwork issues. A five-user license per site is included with the ConnectWAN products. Contact B&B Electronics for larger license requirements.

Accessories

NEW!

Model No. Family Price

DC-WAN-F501 Connect WAN IA $697.95DC-VPN-GE10A Connect WAN VPN 697.95DC-WAN-GE10A Connect WAN 634.95

GSM models

DC-WAN-GE10A

3

(815)433-5100happy to help for 25 years! 35

WIRELESS CELLULARCellular Gateway/Router/VPN for Ethernet and Serial Data

Benefits• Ethernet and serial over cellular network• RS-232/422/485 support • LEDs for Ethernet, power on, cellular link/activity, signal strength• Easy-to-use web interface and set-up wizard• Security: SSL, SSH v.2, FIPS 197, HTTPS • Router/Firewall features: NAT, port forwarding, VPN

pass-through, access control lists (IP filtering) • Extended temperature range (-30º to 60º C CDMA)

(-30º to 70º C GSM)• Includes power supply, 0º to 60º C

(excluded Connect WAN IA)• Optional -35º to 70º C power supply • Includes dipole antenna• “SureLink” always-on maintains wireless connections • RealPort - COM redirection software

Connect WAN VPN — all above benefits plus:• Integrated IPSec VPN (AES, DES, 3DES)• IKE/ISAKMP

Connect WAN IA — all WAN VPN benefits plus:• DIN rail mounting bracket included• Class 1 Division 2• Modbus support• 9 to 30 VDC power input via terminal blocks

GSM models• Quad band 1900/850 and 1800/900 MHz • EDGE class 10, GPRS class 12 • Throughput up to 240 Kbps, 100-130 Kbps typical • Certified networks: Cingular, Rogers Wireless, Midwest Wireless

CDMA models• 800 MHz cellular, 1900 MHz PCS • 1 x RTT • Throughput up to 153 Kbps, 60-80 Kbps typical • Certified networks: Sprint, Verizon, Centennial Wireless, Alltel Wireless

Three Easy Steps to Successful Cellular Data Communications

1. Understand your application

2. Select the hardware thatbest suits your needs

3. Activate the hardware with a cellular data plan

Model No. Family Network Price

DC-WAN-G510 Connect WAN IA Sprint $797.95DC-VPN-S1XA Connect WAN VPN Sprint 797.95DC-WAN-S1XA Connect WAN Sprint 734.95DC-WAN-D311 Connect WAN VPN Verizon 797.95DC-WAN-C111 Connect WAN Verizon 734.95DC-WAN-D316 Connect WAN VPN Alltel 797.95DC-WAN-C116 Connect WAN Alltel 734.95

CDMA models

Model No. Description Price

76000682 DIN mount bracket $27.9576000717 Extended temp power supply (-35 to 70 °C) 80.95DR-30-24 DIN power supply 24 VDC at 1.5 A output 47.00

SCADA or MeteringApplication

Central Office

Internet/Frame Relay

CellularWirelessNetwork

Ethern

et

Serial

PLC

Digi Connect® WAN IA

RESET

9-30V DC

375mA MAX

STATUSPWR

ETHERNETACT

LINK

Connect WAN IA

SIGNAL

STRENGTH

LINKACT

SERIAL

OverviewThe Connect WAN family of commercial-grade wireless WAN cellular routers, gateways and VPN appliances provide secure high-speed wirelessconnectivity to remote sites and devices. These cellular products selected by B&B Electronics can be used for reliable primary wireless network connectivity to equipment at remote locations, as well as for a backup toexisting land-line communications. Ideal where wired networks (e.g., leasedline/frame relay, ISDN, DSL) are not feasible.

Optional Connectware Manager software management suite provides easysetup, configuration, and maintenance of large installations. Users canupgrade firmware, or change settings on thousands of devices with only afew clicks. It makes troubleshooting simple by identifying rogue devices, ornetwork issues. A five-user license per site is included with the ConnectWAN products. Contact B&B Electronics for larger license requirements.

Accessories

NEW!

Model No. Family Price

DC-WAN-F501 Connect WAN IA $697.95DC-VPN-GE10A Connect WAN VPN 697.95DC-WAN-GE10A Connect WAN 634.95

GSM models

DC-WAN-GE10A

3