20
Step - by – Step Instructions Building the Mask Portion of Your Helmet Start with a piece of cardboard 8’’ (L) x 15” (W) Draw on your cardboard just like I have in this power point. There are two exceptions: The nose and the cheeks. You can design those however you like, but follow these guidelines.

Step - by – Step Instructions

  • Upload
    amil

  • View
    55

  • Download
    8

Embed Size (px)

DESCRIPTION

Building the Mask Portion of Your Helmet. Step - by – Step Instructions. Start with a piece of cardboard 8’’ (L) x 15” (W) Draw on your cardboard just like I have in this power point. There are two exceptions: The nose and the cheeks. You can design those however you like, - PowerPoint PPT Presentation

Citation preview

Page 1: Step - by – Step  Instructions

Step - by – Step Instructions

Building the MaskPortion of Your Helmet

Start with a piece of cardboard 8’’ (L) x 15” (W)Draw on your cardboard just like I have in this power point.

There are two exceptions: The nose and the cheeks. You can design those however you like,

but follow these guidelines.

Page 2: Step - by – Step  Instructions

15”

Top edge of your Cardboard

8”

Before you start! Set up you cardboard like I have here.

Page 3: Step - by – Step  Instructions

5” (this is not to scale)5” (this is not to scale)15” (total from left to right)

1”

5”

2”

Then measure 5” toward the center - from the left and the right side. Measure 1” down from the top of the cardboard. Now draw the 1” x 5” box like I have.

1”

Page 4: Step - by – Step  Instructions

1”

5”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

2”

5” (this is not to scale)5” (this is not to scale)15” (total from left to right)

Continue to draw on your cardboard like I do throughout the power point.

Page 5: Step - by – Step  Instructions

1”

5” 5” (this is not to scale)5” (this is not to scale)15” (total from left to right)

2”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

Page 6: Step - by – Step  Instructions

1”

5”

6”

5” (this is not to scale)5” (this is not to scale)15” (total from left to right)

2”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

Page 7: Step - by – Step  Instructions

5” (this is not to scale)5” (this is not to scale)

1”

5”

6”

1”15” (total from left to right)

2”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

The tip of your nose can be shaped however you like.

Page 8: Step - by – Step  Instructions

5” (this is not to scale)5” (this is not to scale)

1”

5”

6”

1”15” (total from left to right)

This area is not to scale. Your personal design will determine how this looks.

2”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

The tip of your nose can be shaped however you like.

Page 9: Step - by – Step  Instructions

5” (this is not to scale)5” (this is not to scale)

1”

5”

6”

1”

This area is not to scale. Your personal design will determine how this looks.

15” (total from left to right)

2”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

The tip of your nose can be shaped however you like.

Page 10: Step - by – Step  Instructions

5” (this is not to scale)5” (this is not to scale)

1”

5”

6”

1”

This area is not to scale. Your personal design will determine how this looks.

15” (total from left to right)

2”

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

The tip of your nose can be shaped however you like.

Page 11: Step - by – Step  Instructions

5” (this is not to scale)5” (this is not to scale)

1”

5”

6”

1”

This area is not to scale. Your personal design will determine how this looks.

15” (total from left to right)

Your cardboard should now look

something like this before you start

cutting.

3” this measurement may vary for each student. Start with 3“ you can always trim it later .

The tip of your nose can be shaped however you like.

Page 12: Step - by – Step  Instructions

Without measurements your

cardboard should now look

something like this BEFORE you start

cutting

This area is not to scale. Your personal design will determine how this looks.

The tip of your nose can be shaped however you like.

Page 13: Step - by – Step  Instructions

These are the lines you want to cut on

to produce the mask

This area is not to scale. Your personal design will determine how this looks.

The tip of your nose can be shaped however you like.

Page 14: Step - by – Step  Instructions

Diagram of the HelmetYou can see how each piece will fit together. There are

also pictures of two helmets.

Page 15: Step - by – Step  Instructions

Back Piece

Mask Piece

Support Piece

BradsConnecting

Pieces

TopPiece

Old Ball Cap w/ no bill

Head bandPiece

Page 16: Step - by – Step  Instructions
Page 17: Step - by – Step  Instructions
Page 18: Step - by – Step  Instructions
Page 19: Step - by – Step  Instructions
Page 20: Step - by – Step  Instructions