Steering Committee - Universitas Brawijayaicoemis.teknik.ub.ac.id/wp-content/uploads/2019/08/... · 2019-08-07 · 1st International Conference on Engineering and Management in Industrial

1 1st International Conference on Engineering and Management in Industrial System

Steering Committee

Rector of Universitas Brawijaya Dean of Engineering Faculty

Vice Dean for Academic Affairs Vice Dean for General and Finance Affairs

Vice Dean for Student Affairs Head of Industrial Engineering Department

Secretary of Industrial Engineering Department

Organizing Committee

General Chairman Sugiono, ST., MT., Ph.D.

Vice-Chairman

Ir. Nasir Widha Setyanto, ST., MT. Dr. Eng. Zefry Darmawan, ST., MT.

Secretary

Dwi Hadi Sulistyarini, ST., MT. Wifqi Azlia, ST., MT.

Treasury Amanda Nur Cahyawati, ST., MT.

Ratih Ardia Sari, ST., MT.

Program Raditya Ardianwiliandri, ST., M.MT.

Paralel Session Yeni Sumantri, S.Si., MT., Ph.D.

Debrina Puspita Andriani, ST., M.Eng. Arif Rahman, ST., MT.


Editorial Board Dr. Eng. Oke Oktavianty, S.Si., MT. Agustina Eunike, ST., MT.,M.BA. Rio Prasetyo Lukodono, ST., MT.

Sylvie Indah Kartika Sari, ST., M.Eng.

Public Relation Ceria Farela Mada Tantrika, ST., MT.

Prof. Dr. Qomariyatus Sholihah, ST., M.Kes. Suluh Elman Swara, ST., MT.

Sponsorship

Angga Akbar Fanani, ST., MT. Wisnu Wijayanto Putro, ST., M.Eng. Endra Yuafanedi Arifianto, ST., MT.

Ir. Bambang Indrayadi, MT. Marudut Sirait, ST., MT. Sri Widiyawati, ST., MT.

Publication & Documentation

Dewi Hardiningtyas, ST., MT., M.BA. Andi Muhammad Mawardi, ST.

Ihwan Hamdala, ST., MT.

Logistic Marjuki Prabowo, S.Kom.

Reza Budi Firmansyah, S.AP. Muhammad Hidayat, SE.

Astuteryanti Tri Lustyana, ST., MT. Henny Tirtasari, S.Sos.

Rosdyana Latifah, S.Sos.


WELCOME MESSAGE

Welcome to the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS). On behalf of the conference committee, I would like to welcome all the presenters and participants at the conference. This conference is organized by the

Department of Industrial Engineering, Universitas Brawijaya. The objective of 2019 1st ICOEMIS is to provide a platform for researchers, engineers, academicians as well as industry professionals from all over the world to present their ideas, research results, and development activities in industrial (both of manufacture & service) management. Following the challenges of the current industrial management, the ICOEMIS topic areas mainly focus on the Open Innovation Application on Service and Manufacturing Industry. In this opportunity, I would like to express my great gratitude to all keynote and invited speakers for their support to make this conference a great success. My high appreciation goes to the Rector of Universitas Brawijaya, Dean of Engineering Faculty Universitas Brawijaya, and Head of Industrial Engineering Department Universitas Brawijaya for their encouragement and funding. Many thanks go to PT. PLN, PT. Elnusa, PT Kompas Media Nusantara, and all technical sponsors for their


kind assistance and funding. Also, I am grateful for the great support of all technical program and organizing committees for their hard work. Finally, my acknowledgment goes to the participants. Thank you for your participation, have a great conference and enjoy your stay in Malang! Thank you!

Sugiono, ST., MT., Ph.D. 1st ICOEMIS 2019 Chairman


Prof. dr. Wim Vanhaverbeke

Wim Vanhaverbeke is a Professor of Strategy and Innovation Management at the Neoma Business School (France) and visiting professor at ESADE Business School and till recently also at the National University of Singapore. He published in

different international journals such as Organization Science, Research Policy, Journal of Product Innovation Management, California Management Review, Journal of Management, Journal of Management Studies, Small Business Economics, Journal of Business Venturing, Technovation, etc. He was co-editor with Henry Chesbrough and Joel West of “Open Innovation: Researching a New Paradigm” (OUP, 2006) and “New frontiers in open innovation” (OUP, 2014). He published a management book “Managing open innovation in SMEs” (CUP – 2017) and an academic volume “Researching open innovation in SMEs” (World Scientific Press – 2018). He is a dedicated open innovation and innovation ecosystem researcher collaborating with different partners around the globe. His current research is focusing on innovation ecosystems and digital strategies and on

KEYNOTE SPEAKERS


open innovation and sustainability. He established the European Innovation Forum with Henry Chesbrough in 2012 and is co-organizer of the World Open Innovation Conference 2016. He is a frequently asked speaker at leading international conferences and an adviser for several globally operating companies. He consults and organizes workshops for multinationals and technology companies. Assc. Prof. Dr. Mohd Rizal Bin Salleh

Dr. Mohd Rizal Bin Salleh is

Associate Professor in Faculty of

Manufacturing Engineering,

University Teknikal Malaysia

Melaka. Who had Doctoral

Degree in System Engineeering

Brunel University Uxbridge,

West London, United Kingdom.

His current research is focus on lean manufacturing,

industrial engineering, metrology, manufacturing process,

measurement uncertainty and agile manufacturing. He

became Malaysia Council of Engineering Deans since

2009-2018.


Dr. Andi Sudjana Putra

Dr. Andi Sudjana Putra is

presently a Lecturer in the

Faculty of Engineering, National

University of Singapore, having

been a research fellow since

2008. He graduated cum laude

in Mechanical Engineering from

Brawijaya University (Indonesia)

in 2001, specializing in energy conversion, with a thesis in

the optimum condition of combustion in laminar flow;

following which he worked for Newmont Mining Corp.

He obtained his Master of Technological Design in

Mechatronics from the National University of Singapore

(NUS) and Technische Universiteit Eindhoven (TU/e) in

2004 with merit, with a thesis on microdispensing system

using the mass inertia of the fluid. In 2009, he obtained his

PhD degree from NUS in Electrical & Computer

Engineering, specializing in control and automation, with

a dissertation on piezoelectric actuation system using

external-sensing and self-sensing approaches.

He has published papers in various international journals

and conferences in relation to his works on controlled

motion and its application in medical devices, lithography,

and manufacturing. He has also published a book and

contributed various chapters about motion control and

INVITED SPEAKERS


automation. He has been awarded a patent in tissue micro

array from WIPO.

Naris Charoenporn, M. Eng.

Naris Charoenporn is a

lecturer and Assistant

Professor at Department of

Industrial Engineering, Faculty

of Engineer, and Human

Factors in Engineering and

Ergonomics in Medical

Engineering Graduate

Program, Thammasat

University, Thailand. He now is the President of

Ergonomics Society of Thailand (EST). He graduated

Bachelor of Engineering (B.Eng., Agriculture Engineering)

from Faculty of Engineering, Kasetsart University.

He received a research assistant funding from the human

factors and ergonomics laboratory, Department of

Industrial Engineering, Faculty of Engineering,

Chulalongkorn University to work on industrial

workstation designs and completed the master degree

(M. Eng., Industrial Engineering) at Chulalongkorn

University. He continued his research work at the

laboratory for the joint research project between the

Department of Industrial Engineering, Chulalongkorn

University and CERGO international in Brussels, Belgium.

The joint research concerned with the exposure limits in

constraining climatic conditions for strenuous tasks. He


then moved to Thammsat University and has worked as a

lecturer in field of safety engineering, industrial work

improvement, human factors in engineering and

ergonomics for over 20 years. In 2001 he got a scholarship

from Ministry of University Affairs for joining research at

the Institute of Occupational Ergonomics (IOE), University

of Nottingham to perform research on changes in body

height and the creep behaviour of spine under different

loading. He has worked and performed several fields of

human factors and ergonomics such as manual material

handling (MMH), workstation design, hand tool design,

ergonomics risk assessment. He was Chair of Southeast

Asian Ergonomics Conference in 2008 and 2018.

He is a past president of Ergonomics Society of Thailand

between 2014-2018 and also a past president of SEANES

(Southeast Asian Network of Ergonomics Societies) He has

contributed his experiences and knowledge in human

factors and ergonomics to many companies, SCG, WD,

Essilor, Sony Device, HGST, PTT, PTT-OR, PTT-GC, Michelin,

Mitsubishi Electric Asia (Thailand), CP, Toshiba Carrier,

Shell, Toyota, Bridgestone, Inergy Automotive,

Shindengen, NEC, Pandora, Cargill, Glow, Shell, Marigot,

Monsanto, PepsiCo, and others via training, risk

assessment, ergonomics best practice awards and

consults. Presently, he collaborates with ergonomics

practitioners and ergonomics national network in

Thailand to write several Ergonomics Standards for Thai

Industrial Standard Institute (TISI), Ministry of Industry.


Ir. Oyong Novareza , ST., MT., Ph. D.

Oyong Novareza, Ph.D. is a

Head of Department in

Industrial Engineering

Universitas Brawijaya. Who

had Doctoral Degree in

Mechanical Engineering

University of Wollongong,

Australia.

He is conducted research in reliability and quality in

Manufacturing System. He had created various published

papers such as “Tribological performance of aqueous

copolymer lubricant in loaded contact with coated film”,

“Friction and anti-wear property of aqueous tri-block

copolymer solutions in metal forming”,”Tribological

performance of aqueous copolymer solutions in metallic

contact”, “Absorbed film structure and tribological

performance of aqueous copolymer lubricants with

phosphate esters additive on Ti coated surfaces”


THURSDAY, AUGUST 8

ATRIA HOTEL MALANG

Time Event Venue

07:00 - 08:00 Registrations

Lobby

Paramount

Ballroom

08.00 – 09.00 Opening Remark

Paramount I

Ballroom

09.00 – 09.50 Keynote Speaker 1

Prof. dr. Wim Vanhaverbeke

09.50 – 10.40 Keynote Speaker 2

Assc. Prof. Dr. Mohd Rizal Bin Salleh

10.40 – 12.00

Invited Speaker 1

Dr. Andi Sudjana Putra

Invited Speaker 2

Naris Charoenporn, M. Eng.

Invited Speaker 3

Oyong Novareza ST., MT., Ph. D.

12.00 – 13.00 Lunch and break Canting Resto

(1st floor)

13.00 – 15.00 Presentation Session I Ivory Meeting

Room

15.00 – 15.15 Coffee Break Lobby meeting

room

15.15 – 17.15 Presentation Session II Ivory Meeting

Room

19:00 - 21:00 Gala dinner

(Best Presented-Paper Award)

Paramount I

Ballroom

PROGRAM AT GLANCE


VENUE LAYOUT


Theme : MANUFACTURING, DESIGN & HUMAN FACTORS

ENGINEERING 1

Time : 13.00 - 15.00

Room : Ivory 3

Session Chair : ASSOC. PROF. DR NUR IZAN SYAHRIAH BINTI HUSSEIN

Operator : Azizah Time Keeper: Saniy

PIC Monitoring: Debrina Puspita Andriani, ST. M.Eng.

No Time Paper

ID Presenter Title

1 13.00 - 13.10 3 Kukuh Winarso and Moh Jufriyanto

STANDART OF GREEN INDUSTRY WITH GREEN INDUSTRY AT THE PT.X GO PUBLIC

2 13.10 - 13.20 4 Ken Erliana, Dani Yuniawan, Fuad Kautsar, Digitha Oktaviani, Samsudin Hariyanto, Djoko Andriono, Effendi Mohamad and Rizal Firdiansyah

Workstation Proposed Design Approach Utilizing Rapid Method Upper Limb Assessment (RULA)

3 13.20 - 13.30 30 Erno Widayanto, Agoes Soehardjono and Wisnumurti Wisnumurti

The Effect of Vibration Energy Changes on Compressive Strength of Concrete Paving Block (CPB) in Concreting Process with Vibroprosseing System

4 13.30 - 13.40 36 Hapsoro Agung Jatmiko

Wheelchair’s Design Development for Disabled People in Yogyakarta, using Quality Function Deployment Method

5 13.40 - 13.50 44 Muhamad Arfauz A Rahman, Muhamad Hakim Rahman, Effendi Mohamad, Azrul Azwan Abdul Rahman, Mohd Rizal Salleh and John P.T. Mo

Enhancing the Automatic Quality Inspection in Manufacturing Process through Parameter Optimization

6 13.50 - 14.00 45 Eko Indah Susanti, Sri Murni Dewi and Yulvi Zaika

Influence Of Pile Diameter And Distance With A Ratio Of Lx/L = 0.75 To Bearing Capacity Of Foundation In Physical Modeling Of Residual Soil With Pile Reinforcement

7 14.00 - 14.10 51 Siti Aisyah, Choesnul Jaqin and Humiras Hardi Purba

LEAN, AGILE, RESILIENT, AND GREEN (LARG) PRACTICE IDENTIFICATION ON AGRO INDUSTRY: A CASE STUDY ON SMEs

8 14.10 - 14.20 52 Ilma Mufidah, Fachri Raziq, Medianti Arifia Dewi and Muhammad Iqbal

Investigating Student Intention to Support the Green Laboratory Program Using the Pro-environmental Reasoned Action Model: A case study from Bandung, Indonesia

PARALLEL SESSION


No Time Paper ID

Presenter Title

9 14.20 - 14.30 59 Mochammad Rofieq, Ken Erliana, Ni Made Wiati and Samsudin Hariyanto

The Work Posture Evaluation at Assembly Work Station in MSEs of Silver Jewelry Handicraft with the REBA Method

10 14.30 - 14.40 67 Choesnul Jaqin, Darso Alimudin, Humiras Hardi Purba and Siti Aisyah

ENGINEERING IMPROVEMENT OF INJECTION PUMP PERFORMANCE BASED ON VALUE OF OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY IN OIL COMPANY

11 14.40 - 14.50 69 Jauharah Hasna Dzakiyyah Adani, Teddy Sjafrizal, Rino Andias Anugraha and Ilma Mufidah

An Effective Scheme of a Depth Sensor Set Up for a Real-Time Ergonomics Assessment by the Gesture Confidence Level

12 14.50 - 15.00 71 Mila Ariefiani, Lukman Handoko and Haidar Natsir Amrullah

Human Error Probabilities Analysis of Grinding Operation in Fabrication and Construction Company Using Fuzzy HEART Method

13 15.00 - 15.10 174 Debrina P Andriani, Adam Khano and Intan Mardiono

Optimization of pull-type production process with computer aided process planning


ENGINEERING 2 Time : 15.15 - 17.15

Room : Ivory 3

Session Chair : Ir. Dr. Muhamad Arfauz Bin A Rahman, C.Eng MIMechE

Operator : Azizah Time Keeper: Saniy PIC Monitoring: Debrina Puspita Andriani, ST. M.Eng.

No. Time Paper ID

Presenter Title

1 15.20 - 15.30 73 Cahyaning Wulan Dhadhari

ASSESSMENT OF WORKER POSTURE IN HERBICIDES PRODUCTION AND BREAK TIME DETERMINATION USING OCRA INDEX METHOD

2 15.30 - 15.40 80 Yogi Tri Prasetyo Occupational Injury, Illness, Fatality, and Work-Related Abuses of Indonesian Fishing Immigrant Workers in Taiwan 2010-2011

3 15.40 - 15.50 85 Mira Rahayu and

Rizky Anggriawan

DESIGN OF ROLLED

CONVEYOR USING RATIONAL PRODUCT DEVELOPMENT METHOD

4 15.50 - 16.00 97 Tania Silvani, Agus Alex Yanuar and Widia Juliani

Application of six sigma method with DMAI approach in railway

manufacturing company


No. Time Paper ID

Presenter Title

5 16.00 - 16.10 130 Aisyah Larasati,

Aal F.P Mahardika, Darin Ramadhanti, Apif Miftahul Hajji, Vertic Eridani Budi Darmawan and Yuh Wen Chen

Building a Predictive Model

to Estimate NOx Emission Pollutant of Backhoe Equipment

6 16.10 - 16.20 134 Oke Oktavianty, Shigeyuki Haruyama and Yoshie Ishii

Effect of Front and Back Suppressing Vibration of Actuation Waveform Design on Droplet Speed and Volume

7 16.20 - 16.30 150 Nurlaila

Handayani, Yusnawati Yusnawati and Yusri Nadya

Choosing Alternative

Managements of Solid Waste from Tofu Producing Small and Medium Enterprises in East Aceh District by Analytical Hierarchy Process (AHP)

8 16.30 - 16.40 151 Williardy Adhum Pratama, Agus Alex Yanuar and Meldi Rendra

PROPOSED REPAIR TO MINIMIZE MOTION WASTE IN PRODUCTION OF HEAD CASING PART AT PT. MULTI INSTRUMENTASI WITH LEAN MANUFACTURING

APPROACH

9 16.40 - 16.50 156 Audrey Unadi, Teddy Sjafrizal and Rino Anugraha

Optimizing Milling Process Parameters of Bovine Horns for Maximizing Surface Quality and Minimizing Power Consumption

10 16.50 - 17.00 157 Fildzah Fajrina, Teddy Sjafrizal and Rino Anugraha

Enhancing Thermal-Shock Reliability of a Sleeveless Power Inductor Assembly upon Reflow Soldering

11 17.00 - 17.10 158 Andini Pratiwi, Marina Yustiana

Lubis and Agus Alex Yanuar

PROPOSAL FOR IMPROVEMENT IN

PRODUCTION PROCESS OF FULL HARD 0,2 x 914 MM PRODUCTS IN PT. XYZ WITH SIX SIGMA METHOD

12 17.10 - 17.20 168 Nur Izan Syahriah Hussein,

Mohamad Nizam Ayof, Nurul Syazwani Akasak and Suraya Laily

Effect of Repetitive Welding using Orbital GMAW on

Mechanical Properties of AISI 304 Austenitic Stainless Steel Pipe

13 17.20 - 17.30 176 Debrina Puspita Andriani, Febry

Wijayanti and Ilma Visi Rahmani

Developing employee performance appraisal

decision model using analytic network process



ENGINEERING 3

Time : 13.00 - 15.00

Room : Ivory 5

Session Chair : Associate Professor Ts. Dr. Effendi Bin Mohamad Operator : Toby Time Keeper: Farhan PIC Monitoring : Arif Rahman, ST., MT.

No. Time Paper

ID

Presenter Title

1 13.00 - 13.10

37 Muhammad Faisal, Asri Gani and Abrar Muslim

Removal of Cadmium Ions Using Biochar from Residue of Pyrolyzed Palm Kernel Shells

2 13.10 -

13.20

64 Ihwan Hamdala,

Oyong Novareza and Anggraini Wisnu Wardani

Capacity Planning Strategy In

Order To Meet Demand In Assembly Process of Train Air Conditioner

3 13.20 - 13.30

78 Yustina Suhandini, Misdiyanto Misdiyanto and Ahmad Izzuddin

Defects Tracking Matrix for Plywood Industry Production based on House of Quality

4 13.30 - 13.40

95 Ayudyah Eka Apsari, Galuh Yuli Astrini, Anindya Agripina Hadyanawati and Hari Purnomo

FARMERS’ WORK POSTURE ANALYSIS AFFECTED MUSCULOSKELETAL DISORDERS

5 13.40 - 13.50

142 Atya Nur Aisha, Fida Nirmala Nugraha and Litasari Widyastuti Suwarsono

Mental Workload Evaluation of Machinery Operators in Manufacturing SMEs

6 13.50 -

14.00

152 Yoshie Ishii and

Shigeyuki Haruyama

A Study on Technology Trend

of Camera by Using F-term in Japanese Patent.

7 14.00 - 14.10

164 Mira Rahayu and Frans Ariantono S.

MEDICAL KIT DESIGN FOR NATURAL DISASTER USING A HUMAN CENTERED DESIGN APPROACH

8 14.10 - 14.20

165 Kojiro Fujiyama, Shigeyuki Haruyama and Shoichi Yano

A Study on Product Life Cycle of Companies Achieving Niche Top in Japan

9 14.20 - 14.30

181 Erno Widayanto, Agoes

Soehardjono, Wisnumurti Wisnumurti and Achfas Zacoeb

The Effect of Vibration Energy Changes on Compressive

Strength of Concrete Paving Block (CPB) in Concreting Process with Vibropressing System

10 14.30 - 14.40

192 Zefry Darmawan, Dwi Hadi Sulistyarini, Oyong

Novareza and Shigeyuki Haruyama

Reduction Bending Collapse on Link Of Flexible Bridge Structure

11 14.50 - 15.00

163 Yonatan Oni Pranata and Mira Rahayu

Optimization Factor of Tray Endless Chain Pressure (ECP) Dryer Machine in Tea

Drying Process Using Taguchi


No. Time Paper ID

Presenter Title

Method at PT Perkebunan

Nusantara VIII Purwakarta

12 15.00 - 15.10

99 Setijo Awibowo, Aditya Tirta Pratama, Nadia Ayuning Putri and Fariz Thomafi

Development Information Support System Application for Organization Performance Improvement: Case PT ABC and PT XYZ.

Theme : MIX Theme (Data Analytics, Information System, Supply Chain

Management, Operation Management)

Time : 15.15 - 17.15

Room : Ivory 5

Session Chair : Dr. Mohd Amri Bin Sulaiman

Operator : Toby Time Keeper: Farhan

PIC Monitoring : Arif Rahman, ST., MT. No. Time Paper

ID Presenter Title

1 15.20 - 15.30 35 Ivan Kurniawan, Setijo Awibowo

and Aditya Tirta Pratama

IoT Integrated Assembly Line - a conceptual model

development for car toys assembly line

2 15.30 - 15.40 188 Rahmi Yuniarti, Aditya Ludi Pratama and Wifqi Azlia

Minimizing The Bullwhip Effect Using Demand Forecasting Autoregressive Integrated Moving Average

Model

3 15.40 - 15.50 143 Litasari Widyastuti Suwarsono, Atya Nur Aisha and Fida Nirmala Nugraha

Comparison of Job Evaluation Methods: Implications for the Salaries Design in Publishing Company

4 15.50 - 16.00 175 Muhammad Irwan, Endang Chumaidiyah and Wawan Tripiawan

Marketing Strategy Analysis of Arca Industry as Furniture Business Using the QSPM Method

5 16.00 - 16.10 94 Nurina Sharfina,

Yuniaristanto and Roni Zakaria

BUSSINESS

DEVELOPMENT ON BUKASUARA STARTUP WITH STARTUP EVOLUTION CURVE METHODS

6 16.10 - 16.20 106 Herry Irawan, Risca Septi

Widyawati and Andry Alamsyah

Tourism destination preference identification

based on geotag feature on Instagram using data analytics and topic modeling

7 16.20 - 16.30 116 Issa Utami, Iwan Santosa, Rullie Annisa, Endah

Retnaningsih and Ika Anna

Effect comparison of Bandeng Payus Fish with Tapioca Flour and

Proportion of Water to Organoleptic, Physical and Chemical Characteristics of Fish Crackers

8 16.30 - 16.40 144 Aulia Ishak and Tomi Wijaya

Design of Supplier Selection Models Using Data


No. Time Paper ID

Presenter Title

Envelopment Analysis

(DEA) and Data Mining Techniques

9 16.40 - 16.50 145 Aulia Ishak and Syafiah Khairunnisa

SUPPLIER SELECTION USING ANALYTICAL HIERARCHY PROCESS (AHP) AND TECHNIQUE

FOR ORDER PREFERENCE BY SIMILARITY TO IDEAL SOLUTION (TOPSIS) : CASE STUDY

10 16.50 - 17.00 179 Muhamad Ekhsan, Nur Aeni,

Ryani Dhyan Parashakti and Mochammad Fahlevi

THE IMPACT OF MOTIVATION, WORK

SATISFACTION AND COMPENSATION ON EMPLOYEE'S PRODUCTIVITY IN COAL COMPANIES

11 17.00 - 17.10 182 Dwi Iryaning

Handayani

Application of Grey Teory

Method for Halal Food Risk Assessment Based on the Traceability System in Food Supply Chain

12 17.10 - 17.20 186 Yogi Tri Prasetyo, Retno

Widyaningrum and Chiuhsiang Joe Lin

Eye-Hand Movements in Projection based

Stereoscopic Display: A Structural Equation Modeling Approach

13 17.20 - 17.30 187 Yogi Tri Prasetyo Evaluating Army, Navy, Marine, and Air Force Military Camouflages Effectiveness: A Case Study

of Indonesian Military Camouflage

Theme : SUPPLY CHAIN & OPERATION MANAGEMENT 1

Time : 13.00 - 15.00

Room : Ivory 6

Session Chair : Dr. Mohd Amri Bin Sulaiman

Operator : Rosiana Time Keeper: Syafira PIC Monitoring : Yeni Sumantri, S.Si., MT., Ph.D.

No. Time Paper ID

Presenter Title

1 13.00 - 13.10

2 Primahasmi Dalulia, Ni Made Wiati, Aang Fajar Pasha, Vetty Kartikasari, Ika

Anggraeni Khusnul Khotimah, Erwin Dwi Pambudi, Ken Erliana and Pindo Tutuko

Redesigning Customer Satisfaction Measurement Instrument Using Multi Criteria Decision Making

Perspective

2 13.10 - 13.20

15 Sahr Fillie, Niniet Indah Arvitrida and

Nyoman I Pujawan

Collaborative Inventory Management for Seasonal

Products by Incorporating


No. Time Paper ID

Presenter Title

Newsvendor and Buyback

Contract

3 13.20 - 13.30

47 Fuad Dwi Hanggara DEVELOPMENT OF BUSINESS STRATEGY THROUGH BLUE OCEAN STRATEGY MODEL (BOS) (CASE STUDY: RESTO X)

4 13.30 - 13.40

50 Humiras Hardi Purba, Choesnul Jaqin and Siti Aisyah

INNOVATION TIPOLOGY IN AGRO INDUSTRY: A CASE STUDY IN SMEs

5 13.40 - 13.50

58 Wahyuda Wahyuda and Muslimin Muslimin

Development of Transportation Models for Scheduling Power Plants

and Electricity Distribution

6 13.50 - 14.00

65 Hastawati Chrisna Suroso and Chindy Elsanna Revadi

The Main Factors that Affect Pilot Attention and Decision Making during Landing Operation Leading to Runway Incursion

7 14.00 - 14.10

75 Aisyah Larasati, Muhammad Farhan, Puji Rahmawati, Nabila Azzahra, Apif Miftahul Hajji and Anik Nur Handayani

Designing Classification Model of Customer Visit in Library using Decision Tree Model

8 14.10 - 14.20

84 Meirina Pane Implementation Concept of Industry 4.0 to Manufacturing Industry in Indonesia in Order to Optimize Supply Chain Management

9 14.20 -

14.30

89 Marwan Marwan DESIGN OF ELECTRONIC

SUPPLY CHAIN MANAGEMENT INFORMATION SYSTEM IN PT. XYZ

10 14.30 - 14.40

91 Krismodianto and Santoso

Proposal of Route Determination Method

Using A Multi-Objective Genetic Algorithm

11 14.40 - 14.50

100 Yasmine Husna Arsyifa, Yuniaristanto and I Wayan Suletra

Analysis of Simulation in Supply Chain Management Based on System Dynamics and SCOR Model (a Case

Study : Newspaper Industry)

12 14.50 - 15.00

101 Issa Utami, Iwan Santosa, Atik Mardiana and Ari Basuki

Resilience Measurement of SMEs Batik Sampang in Dealing with Natural Disaster

13 15.00 - 15.10

189 Ahmad Farhan, Purnomo Budi Santoso and Yeni Sumantri

A Framework of a Web Based Machine Troubleshooting Information System In Relational Model Based on Group Technology


Theme : SUPPLY CHAIN & OPERATION MANAGEMENT 2

Time : 15.15 - 17.15

Room : Ivory 6

Session Chair : Nor Akramin Mohamad Operator : Rosiana Time Keeper: Syafira PIC Monitoring : Yeni Sumantri, S.Si., MT., Ph.D.

No. Time Paper ID

Presenter Title

1 15.20 - 15.30 103 Amalia Yuli Astuti, Utaminingsih Linarti and Mohamad Tri Angga Yulistiyanto

Identifying waste cooking oil chains to become an energy resource: study case in Yogyakarta

2 15.30 - 15.40 112 Niura Ikasari, Yuniaristanto and Wahyudi Sutopo

Supply Chain Performance Measurement using Hybrid SCOR Model and System Dynamics

3 15.40 - 15.50 118 Rainisa Maini Heryanto, Yenny

Stephanie and Santoso Santoso

Determination of Distribution Route using Linear

Programming Model (Case Study at Company X)

4 15.50 - 16.00 126 Anjani Maulaya Maulaya, Ari Yanuar Ridwan and Budi Santosa

Spare Part Inventory Policy Planning based on FRMIC (Fuzzy-Rule-based approach for Multi-Criteria Inventory Classification) using Base-

Stock Policy Method (S-1, S) for High Priority Spare Parts in PT XYZ

5 16.00 - 16.10 137 Aziz Syam and Bonivasius Prasetya

Cargo Bikes in Transit Oriented Development: Concept and Route

Clustering

6 16.10 - 16.20 140 Erwin Susanto Sadirsan, Henny Handayani and Endang Susilowati

Empower Rural Urban Sustainable Development Planning, case study Tanjung Pasir and the Kapuk Angke Nature Tourism Park

7 16.20 - 16.30 141 Erwin Susanto Sadirsan, Tifa Asrianti, Endang Susilowati and Ratna Ariati

Planning of Green & Smart Campus Design in Jakarta with Case Study of Early Energy Audit at UNSADA Faculty of Economics Building

8 15.30 - 15.40 139 Erwin Susanto Sadirsan, Rantri Dena Fauziah and Niken Parwati

Establish Decision Supporters in Developing Tenant Tajeer Entrepreneurship at Al Azhar University in Indonesia

9 16.40 - 16.50 146 Qomariyatus Sholihah, Amanda

Nur Cahyawati, Raditya Ardianwiliandri and Eko Ludvy Zedniawan

ANALYSIS OF THE EFFECT OF CULTURAL

FACTORS, LEADERSHIP STYLE, AND TEAM WORK ON SAFETY PERFORMANCE OF STUDENTS IN


No. Time Paper ID

Presenter Title

LABORATORY FACULTY

OF ENGINEERING

10 16.50 - 17.00 149 Yusnawati Yusnawati, Nurlaila Handayani and Yusri Nadya

Risk Causing Identification of Mushroom Supply Chain in Langsa City by SCOR Method

11 17.00 - 17.10 154 Salman Shadiqurrachman, Ari Yanuar Ridwan and Putu Giri Artha Kusuma

Online Travel Agency Channel Pricing Policy based on Dynamic Pricing Model to Maximize Profit Using Nonlinear Integer Programming Approach

12 17.10 - 17.20 171 Wibawa Prasetya, Ma'Ruf Akbar and Billy Tunas

On Identifying the Factors that Affect Turnover Intention

13 17.20 - 17.30 184 Yeni Sumantri Developing Strategy for Heritage Tourism Supply Chain Quality Management

14 17.30 - 17.40 185 Yeni Sumantri and Imma Widyawati Agustin

The Impact of Industrial, Trading and Services Land Use on Transportation Flow

Theme : MIX THEME

Time : 13.00 - 15.00

Room : Paramount 1A

Session Chair : Oyong Novareza, ST., MT., Ph.D. Operator : Suci Time Keeper: Ghafar PIC Monitoring : Rio Prasetyo Lukodono, ST., MT.

No Paper ID Presenter Title

1 5 Arif Rahman A Sliced Adjacent Interval Technique Of Quadratic Regression To Approximate Product Life Cycle Curve Fitting

2 8 Arif Rahman Gaussian Distribution On Validity Testing To Analyze The Acceptance Tolerance and Significance Level

3 12 Ceria Farela Mada Tantrika, Ratih Ardia Sari

Non-Permutation Flowshop Scheduling for Minimizing Makespan and Total Completion Time by Using Mixed Integer Programming

4 13 Ceria Farela Mada

Tantrika, Agustina Eunike, I Dewa Made Surya Pramana Putra

Hybrid Flowshop Scheduling in

Embroidery Production Process for Minimizing Total Tardiness

5 14 Suluh Swara, Oyong Novareza, Sherenia Gita

EFFECTIVITY EVALUATION OF PRODUCTION LINE 2 PRE-MOLD CONCRETE USING OVERALL EQUIPMENT

EFFECTIVENESS (OEE) AND



OVERALL RESOURCE EFFECTIVENESS (ORE)

6 27 Zefry Darmawan, Dwi Hadi Sulistyarini

Optimization design of flexible bridge as a solution to reduce traffic jam caused by road maintenance services

7 28 Oyong Novareza, Zefry Darmawan, Dwi

Hadi Sulistyarini

Design system of periodical regular maintenance of reliability,

availability, maintainability, and safety (RAMS) on drive system of diesel-electric railway train

8 29 Nor Asmaa Alyaa Nor Azlan, Effendi Mohamad, Mohd Rizal Salleh, Oyong

Novareza, Dani Yuniawan, Muhamad Arfauz A Rahman and Adi Saptari

MULTIPLICITY OF APPROACH AND METHOD IN AUGMENTATION OF SIMPLEX METHOD A REVIEW

9 31 Sugiono Sugiono Health and safety Analysis of Online Driver Based on Sleeping Quality: Case Study in Indonesia

10 32 Sugiono Sugiono Analysis the Correlation between Driving Mental Stress and Level of Concentration

11 33 Sugiono Sugiono, Oyong Novareza, Dwi Hadi Sulistyarini

Body & Interior Design for Medium Train Speed Based On Static and Dynamic Passengers Anthropometry

Theme : MIX THEME

Time : 13.00 - 15.00 Room : Paramount 1B Session Chair : Oyong Novareza, ST., MT., Ph.D. Operator : Suci Time Keeper: Ghafar PIC Monitoring : Rio Prasetyo Lukodono, ST., MT.


1 34 Sugiono Sugiono, Siti Nurlaela, Achmad Wicaksono, Andyka Kusuma, Rio Prasetyo Lukodono

Feasibility Study of Noise, Lighting And Pollution Levels at MRT Stations

2 170 Rio Prasetyo Lukodono, Sugiono Sugiono, Raditya Ardianwiliandri, Intan Denova

NIOSH-based Workers' Stress Measurements in Manufacturing Industry

3 173 Qomariyatus Sholihah, Nasir Widha Setyanto, Endra Yuafanedi Arifianto,

Sylvie I. Kartika Sari, Wisnu Wijayanto Putro, Eko Ludvy Zedniawan

WORK SAFETY AND HEALTH PROGRAM IN LABORATORY FACULTY

OF ENGINEERING BRAWIJAYA UNIVERSITY



4 177 Lalu Tri Wijaya Nata Kusuma, Yuka Putri Renosuri Manti, Syaifurrizal Majid and Adinda Nur Ramadhani Nainggolan

Indonesia Sea Toll Strategy Framework Directive: Innovative and Participatory Decision-Making Methods Towards the World Maritime Axis

5 190 Sugiono Sugiono, Rio Prasetyo Lukodono,

Anggita

IMPROVING INTERFACE DESIGN OF SUPPORTING

FACILITIES ON MRT (MASS RAPID TRANSIT) BASED NASA TLX MEASUREMENT

6 191 Purnomo Budi Santoso, Angga Akbar Fanani

An Integration of Knowledge Management and Case Based Reasoning for Maintenance

7 193 Agustina Eunike, Angga Akbar Fanani

Analysis of Fuel Consumption in Dairy Distribution under Traffic Congestion using Fuzzy Linear Programming

8 194 Dewi Hardiningtyas, Yeni Sumantri, Agustina Eunike

Factors Affecting Research Motivation among Lectures in State and Private Universities in Malang City, Indonesia

9 195 Ishardita Pambudi Tama, Dewi Hardiningtyas

Physical Activity Assessment using Accelerometer for University Students in Malang City,

Indonesia

10 196 Sri Widiyawati, Astuteryanti Tri Lustyana, Rio Prasetyo Lukodono, Izzaudin Afif Pradana

DESIGN FACILITY TO IMPROVE WORK POSTURE BASED ON RULA (RAPID UPPER LIMB ASSESSMENT) MEASUREMENT

11 198 Widha Kusumaningdyah Proposing Energy Product Service Systems (EPSS) to improve resource and energy efficiency in current system


Theme : MIX THEME Time : 13.00 - 15.00

Room : Paramount 1C Session Chair : Oyong Novareza, ST., MT., Ph.D. Operator : Suci Time Keeper: Ghafar PIC Monitoring : Rio Prasetyo Lukodono, ST., MT.


1 199 Marudut Sirait, Nopitasari Inventory System for Leather Material :

Comparison of Continuous Review Policy and Periodic Review Policy

2 200 Agustina Eunike, Sugiono Sugiono, Ishardita Pambudi Tama, Sri Widiyawati, Galih D.A. Pramono, Rahmi Yuniarti

AN ANALYSIS OF INDONESIAN MILKFISH UPSTREAM SUPPLY CHAIN: SYSTEM DYNAMICS APPROACH

3 201 Nasir Widha Setyanto, Rio Prasetyo Lukodono, Remba Yanuar Efranto, Raditya Ardianwiliandri

Enhancing of Protein Level in Producing Mushroom Floss Using Taguchi Method to Reach SNI 01-3707-1995 standard

4 202 Arif Rahman, Suluh Elman Swara, Ihwan Hamdala, Dasa Retia Murwani

MATERIAL REQUIREMENT PLANNING CONSIDERING DEFECT RISK IN RATTAN CRAFTS PRODUCTION

5 204 Ratih Ardia Sari, Andyan

Prabowo, Amalia Ridha Rahmah

A Modified Saving

Algorithm for ATM Maintenance Scheduling with Time Windows

6 205 Angga Akbar Fanani, Nasir Widha Setyanto

Minimizing Inventory Cost Using Periodic Review Method and Monte Carlo Simulation Considering

Uncertain Product Demand

7 206 Bambang Indrayadi, Marudut Sirait

Analysis of Overall Line Effectiveness (OLE) for Improving Effectiveness Production Line : The Case of PT Coca-Cola Indonesia

8 207 Wifqi Azlia, Rahmi Yuniarti, Ihwan Hamdala

Risk Identification in Leather Craft Industry Using Supply Chain Operation Reference (SCOR)

9 209 Amanda Nur Cahyawati Analysis of IFE, EFE, IE and QSPM in Food

Product Home Industry Malang



10 210 Ishardita Pambudi Tama, Agustina Eunike, Rahmi Yuniarti, Ihwan Hamdala, Wifqi Azlia and Juniar Rilo Pratama

Supply Chain Risk Management to Improve Small and Medium Enterprises Competitiveness: The Case of Cassava Chips Industry

11 211 Puspitasari Andra Sukma,

Agustina Eunike, and Amanda Amadea Sahara

Minimizing Corrective

Maintenance Cost through Spare Parts Classification and Inventory Control

12 169 Ruly Wiliandri, and Raditya Ardianwiliandri

Factors Influencing Socio-Demographic and Socio-economimcs Block of Factors Towards The Selection of Elderly care Institution In Rural and Urban Area (Case Study in East Java)

Documents

Steering Committee - Universitas Brawijayaicoemis.teknik.ub.ac.id/wp-content/uploads/2019/08/... · 2019-08-07 · 1st International Conference on Engineering and Management in Industrial