Steel-supported Glazed Facades and Roofs - Steelconstruction.info

8/12/2019 Steel-supported Glazed Facades and Roofs - Steelconstruction.info

1/12

Steel-supported glazed facades and roofs - Steelconstruction.info

http://www.steelconstruction.info/Steel-supported_glazed_facades_and_roofs[7/10/2014 9:20:16 AM]

SteelConstruction.infoThe free encyclopedia for UK steel construction information

Log in / create account

SHARE

0Like

Tweet

0

KEY RESOURCES

HOT TOPICS

QUICK LINKS

What's New

The Blue Book

The Green Books

Eurocode Guides

Design software

Section sizes

CE marking

Construction news

Video case studies

Steelwork costs

Embodied carbon

Thermal mass

Why use steel?

Tata Steel Construction

Steelwork Contractors

Product suppliers

BCSA Shop

[top]

Steel-supported glazed facades and roofs

Steel is the most suitable material to use to support facadesin circumstances where glazing has to be supported over distances of more than about four

metres. The strength and stiffnessof steel is such that supporting elements are of smaller section and therefore less obtrusive than would be the case with

other commonly-used materials such as aluminium.

Tubularand tension elements are used in atrium roofs and vertical facadesto form elegant and minimally intrusive support for glazing. Large deflections can

be managed by careful detailing of fixings to glazing, such that local bending of the glass is avoided.

Contents [hide]1 Atrium Roofs and Sky lights

1.1 Glazing systems with pressure plates1.2 Steel rafters supporting aluminium profiles

1.3 Silicone-pointed glazing

2 Vertical Facades with steel mullions

2.1 Point-fixed glazing

3 Cable supported facades

4 References

5 Resources

6 See also

7 External links

Atrium Roofs and Sky lights

Atria are common features of office buildingswhere the layout involves large floor plates. In shopping

centres,the external walls tend to have few windows and stores generally face onto an internal street

which is extensively glazed at roof level. The roof glazing allows natural light to penetrate deep inside

the building for the benefit of the users and to reduce the energy-consumptionof artificial lighting.

The structural systems used to support these roofs are designed to maximize the amount of light entering

the building, using members of the minimum width possible. Tubular membersare often used and

painted in a light colour so as to absorb as little light as possible.

Cabot Circus, Bristol

Search
http://www.steelconstruction.info/index.php?title=Special:UserLogin&returnto=Steel-supported_glazed_facades_and_roofshttp://plus.google.com/115686011339443249042/abouthttps://twitter.com/intent/tweet?original_referer=http%3A%2F%2Fwww.steelconstruction.info%2FSteel-supported_glazed_facades_and_roofs&text=Steel-supported%20glazed%20facades%20and%20roofs%20-%20Steelconstruction.info&tw_p=tweetbutton&url=http%3A%2F%2Fgoo.gl%2Fuu46Mzhttp://www.steelconstruction.info/The_Steel_Construction_Information_Systemhttp://www.steelconstruction.info/The_Blue_Bookhttp://www.steelconstruction.info/The_Green_Bookshttp://www.steelconstruction.info/Eurocode_Design_Guideshttp://www.steelconstruction.info/Design_software_and_toolshttp://www.steelconstruction.info/Steel_section_sizeshttp://www.steelconstruction.info/CE_markinghttp://www.steelconstruction.info/Steel_construction_newshttp://www.steelconstruction.info/Video_case_studieshttp://www.steelconstruction.info/Cost_of_structural_steelworkhttp://www.steelconstruction.info/Life_cycle_assessment_and_embodied_carbonhttp://www.steelconstruction.info/Thermal_masshttp://www.steelconstruction.info/The_case_for_steelhttp://www.tatasteelconstruction.com/https://www.steelconstruction.org/directories.htmlhttp://www.steelconstruction.org/directories/products-and-services.htmlhttp://www.steelconstruction.org/resources/publications-and-online-shop.htmlhttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/The_case_for_steel#Strong.2C_ductile_and_durablehttp://www.steelconstruction.info/The_case_for_steel#Strong.2C_ductile_and_durablehttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Facades_and_interfaceshttp://toggletoc%28%29/http://www.steelconstruction.info/Multi-storey_office_buildingshttp://www.steelconstruction.info/Multi-storey_office_buildingshttp://www.steelconstruction.info/Concept_design#Floor_gridshttp://www.steelconstruction.info/Retail_buildings#Shopping_centreshttp://www.steelconstruction.info/Retail_buildings#Shopping_centreshttp://www.steelconstruction.info/Retail_buildings#Shopping_centreshttp://www.steelconstruction.info/Operational_carbonhttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Cabot_Circus,_Bristolhttp://www.steelconstruction.info/Cabot_Circus,_Bristolhttp://www.steelconstruction.info/File:R2_image.pnghttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Operational_carbonhttp://www.steelconstruction.info/Retail_buildings#Shopping_centreshttp://www.steelconstruction.info/Retail_buildings#Shopping_centreshttp://www.steelconstruction.info/Concept_design#Floor_gridshttp://www.steelconstruction.info/Multi-storey_office_buildingshttp://toggletoc%28%29/http://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/The_case_for_steel#Strong.2C_ductile_and_durablehttp://www.steelconstruction.info/Facades_and_interfaceshttp://shop.steel-sci.com/http://www.steelconstruction.org/resources/publications-and-online-shop.htmlhttp://www.steelconstruction.org/resources/publications-and-online-shop.htmlhttp://www.steelconstruction.org/directories/products-and-services.htmlhttp://www.steelconstruction.org/directories/products-and-services.htmlhttps://www.steelconstruction.org/directories.htmlhttps://www.steelconstruction.org/directories.htmlhttp://www.tatasteelconstruction.com/http://www.tatasteelconstruction.com/http://www.steelconstruction.info/The_case_for_steelhttp://www.steelconstruction.info/The_case_for_steelhttp://www.steelconstruction.info/Thermal_masshttp://www.steelconstruction.info/Thermal_masshttp://www.steelconstruction.info/Life_cycle_assessment_and_embodied_carbonhttp://www.steelconstruction.info/Life_cycle_assessment_and_embodied_carbonhttp://www.steelconstruction.info/Cost_of_structural_steelworkhttp://www.steelconstruction.info/Cost_of_structural_steelworkhttp://www.steelconstruction.info/Video_case_studieshttp://www.steelconstruction.info/Video_case_studieshttp://www.steelconstruction.info/Steel_construction_newshttp://www.steelconstruction.info/Steel_construction_newshttp://www.steelconstruction.info/CE_markinghttp://www.steelconstruction.info/CE_markinghttp://www.steelconstruction.info/Steel_section_sizeshttp://www.steelconstruction.info/Steel_section_sizeshttp://www.steelconstruction.info/Design_software_and_toolshttp://www.steelconstruction.info/Design_software_and_toolshttp://www.steelconstruction.info/Eurocode_Design_Guideshttp://www.steelconstruction.info/Eurocode_Design_Guideshttp://www.steelconstruction.info/The_Green_Bookshttp://www.steelconstruction.info/The_Green_Bookshttp://www.steelconstruction.info/The_Blue_Bookhttp://www.steelconstruction.info/The_Blue_Bookhttp://www.steelconstruction.info/The_Steel_Construction_Information_Systemhttp://www.steelconstruction.info/The_Steel_Construction_Information_Systemhttp://www.linkedin.com/groups?gid=4568498&trk=group-namehttps://twitter.com/intent/tweet?original_referer=http%3A%2F%2Fwww.steelconstruction.info%2FSteel-supported_glazed_facades_and_roofs&text=Steel-supported%20glazed%20facades%20and%20roofs%20-%20Steelconstruction.info&tw_p=tweetbutton&url=http%3A%2F%2Fgoo.gl%2Fuu46Mzhttps://twitter.com/intent/tweet?original_referer=http%3A%2F%2Fwww.steelconstruction.info%2FSteel-supported_glazed_facades_and_roofs&text=Steel-supported%20glazed%20facades%20and%20roofs%20-%20Steelconstruction.info&tw_p=tweetbutton&url=http%3A%2F%2Fgoo.gl%2Fuu46Mzhttps://twitter.com/intent/tweet?original_referer=http%3A%2F%2Fwww.steelconstruction.info%2FSteel-supported_glazed_facades_and_roofs&text=Steel-supported%20glazed%20facades%20and%20roofs%20-%20Steelconstruction.info&tw_p=tweetbutton&url=http%3A%2F%2Fgoo.gl%2Fuu46Mzhttp://www.linkedin.com/groups?gid=4568498&trk=group-namehttp://www.linkedin.com/groups?gid=4568498&trk=hb_side_ghttps://twitter.com/steelcoinfohttp://www.facebook.com/steelconstruction.infohttp://plus.google.com/115686011339443249042/abouthttp://www.youtube.com/user/TheSteelConstructionhttp://www.steelconstruction.info/index.php?title=Special:UserLogin&returnto=Steel-supported_glazed_facades_and_roofshttp://www.steelconstruction.info/index.php?title=Special:PdfGenerate&page=Steel-supported_glazed_facades_and_roofshttp://www.steelconstruction.info/http://www.steel-sci.com/http://www.tatasteelconstruction.com/http://www.steelconstruction.org/


2/12



TOOLBOX

SCI Shop

NSC Magazine

Index of main articles

Report Error

Did not Find

[top]Glazing systems with pressure plates

Sky lights consisting of areas of sloped glazing in a single plane and atrium roofs may adopt a system of

sloping rafters with orthogonal purlins which are designed to retain the glazing by applying a clamping force.

Glass panes can be monolithic or insulated glazing units and in simple sky lights are generally clamped on

all four edges using a pressure plate which is screwed into the rafter or purlin. Setting blocks are providedon the lower edge of the pane to resist the component of the weight acting in the plane of the glass.

Water management is fundamental to the proper functioning of the sky light glazing system. The slope of the

roof has to be sufficient to prevent the deflection of glazing and supporting members from causing ponding

and to provide sufficient flow velocity to wash dirt away. Rainwater will inevitably be prevented from draining

freely away by purlin pressure plates but gaps should be provided at the junctions between rafter and purlin

pressure plates to allow most of the water to run off. Cover caps which clip onto the pressure plate provide

an aesthetic external finish to the glazing bars.

Rafters and purlins are designed with drainage channels which interconnect as a secondary drainage path such that any water which passes the gaskets at

the edge of a pane of glass is collected and conducted down the roof to discharge at the bottom of a rafter. A secondary potential source of water is

condensation on the inside surface of the glass which the supporting elements are also designed to collect. Condensate drainage channels on the purlins

discharge into similar channels on rafters and are drained to the exterior at the bottom of the roof. The elements for this type of roof are usually extruded inaluminium because the profiles required to accommodate pockets for gaskets and to form condensate drainage paths are easily extruded.

Tubular atrium

steelwork

Curved tubular

steelwork

Purlin with pressure plate
http://shop.steel-sci.com/http://www.newsteelconstruction.com/http://www.steelconstruction.info/Index_of_main_articleshttp://www.steelconstruction.info/Special:Report/errorhttp://www.steelconstruction.info/Special:Report/didnotfindhttp://www.steelconstruction.info/File:A2-Fig1a.pnghttp://www.steelconstruction.info/File:A2-Fig2a.pnghttp://www.steelconstruction.info/File:A2-Fig1.pnghttp://www.steelconstruction.info/Special:Report/didnotfindhttp://www.steelconstruction.info/Special:Report/didnotfindhttp://www.steelconstruction.info/Special:Report/errorhttp://www.steelconstruction.info/Special:Report/errorhttp://www.steelconstruction.info/Index_of_main_articleshttp://www.steelconstruction.info/Index_of_main_articleshttp://www.newsteelconstruction.com/http://www.newsteelconstruction.com/http://shop.steel-sci.com/http://shop.steel-sci.com/


3/12



[top]

[top]

Steel rafters supporting aluminium profiles

To achieve long span glazed roofs, structural steel rafters can be provided to support aluminium profiles

shaped to provide the water management and glazing support functions. Purlins span between these raftersto provide the interconnecting drainage and condensate channels. The framing geometry is then dictated by

the size of glazing unit which may in turn be determined by the maximum weight which can be handled in

the event of replacement of a glass unit following breakage.

The connections between the structural steel rafters and the aluminium profiles must be provided with

adequate adjustment so that the glazing can be installed to faade engineering toleranceswhich are often

about +/- 2 mm.

Silicone-pointed glazing

A partially flush surface can be provided to the exterior glazing by omitting the pressure plate and

cover caps to the purlins and substituting them with silicone pointing. This provides an uninterrupted

surface between rafters, eliminating the entrapment of water behind the purlin pressure plate and the

result is therefore a cleaner surface because rainwater runs off more quickly and takes dirt with it.

This type of glazing can be used for a shallower roof slope than purlins with pressure plates behind

which water would be trapped leading to dirt build-up. The glazing spans one-way against uplift forces

(rafter to rafter) but is supported on four sides against inward pressure.

Glazing can be retained using discrete fixings at

intervals on the edges of the panes. These patch

Rafter-purlin junction

Steel rafter

Silicone pointing to purlins
http://www.steelconstruction.info/Construction#Toleranceshttp://www.steelconstruction.info/File:A2-Fig3.pnghttp://www.steelconstruction.info/File:A2-Fig2.pnghttp://www.steelconstruction.info/File:A2-Fig1b.pnghttp://www.steelconstruction.info/Construction#Tolerances


4/12



[top]

fittings are bolted through the joints between the

glazing units into the supporting steelwork. They are

isolated from the glass by a nylon-based plastic washer and bush and the joints are silicone pointed to

provide a seal. A flush surface can be achieved interrupted only by the patch fittings which retain the glazing

against uplift forces.

In the roof illustrated, triangular glazed units form a facetted surface following the supporting steelwork. In

this arrangement of roof glazing the roof is face-sealed and has no secondary path for water in the event of

failure of a silicone joint and no means of dealing with condensation as can be seen from an internal view of

the roof below.

Joints between the steel grid shell elements are welded, making use of parting plates to assist with fabrication tolerances, as can be seen in the photograph.

The grid shell is supported in this case by trees made from circular hollow sections. Pins are used to make simple and aesthetically pleasing connections

between the grid shell and the supporting trees.

Vertical Facades with steel mullions

Steel elementsprovide great flexibility of choice where glazing mullions are required to support a large

area of faade.For example, in a double height space, mullions can be spaced several metres apart(e.g. four metres or more), supporting horizontal transoms to provide transparency when viewed

obliquely.

Silicone pointed glazing with patch fittings

Joints between steel grid shell rafters Roof support tree Pinned connection detail
http://www.steelconstruction.info/Weldinghttp://www.steelconstruction.info/Accuracy_of_steel_fabrication#Fabrication_toleranceshttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Simple_connectionshttp://www.steelconstruction.info/Steel_construction_productshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/File:A2-Fig4.pnghttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Steel_construction_productshttp://www.steelconstruction.info/Simple_connectionshttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Accuracy_of_steel_fabrication#Fabrication_toleranceshttp://www.steelconstruction.info/Weldinghttp://www.steelconstruction.info/File:A2-Fig7.pnghttp://www.steelconstruction.info/File:A2-Fig6.pnghttp://www.steelconstruction.info/File:A2-Fig5.png


5/12


6/12



Fabricated steelmullions of varying depth along the element are easy to manufacture so mullions do not need to be limited to prismatic sections, unlike

extruded aluminium elements where the extrusion process necessarily results in this form.

The Western Morning News building has tapered curved steel columns which support the roof structure and form the mullions for the outward sloping glazing.

The glass is supported laterally by arms fixed to the columns and vertically by cables suspended from the tops of the columns. Stainless steelspiders provide

the connection between the glass and the supporting elements.

Western Morning News building, Plymouth

Increased bendingstiffness in mullions can be achieved by using small diameter cable-stays. Mullions can

also be formed only from cables as illustrated (right and below).

Cables are tensioned to maintain the stiffness of the element under reversal of loading. If this was not done,

a load which put the cable into compression would result in a slack cable and a more flexible element for

this load case.

Truss mullions with horizontal arms

(Image courtesy of Arup) (Image courtesy of Arup)
http://www.steelconstruction.info/Steel_construction_products#Fabricated_productshttp://www.steelconstruction.info/Steel_construction_products#Stainless_steel_productshttp://www.steelconstruction.info/Member_design#Bendinghttp://www.steelconstruction.info/File:A2-Fig11.pnghttp://www.steelconstruction.info/Member_design#Bendinghttp://www.steelconstruction.info/File:A2-Fig12b.pnghttp://www.steelconstruction.info/File:A2-Fig12a.pnghttp://www.steelconstruction.info/Steel_construction_products#Stainless_steel_productshttp://www.steelconstruction.info/Steel_construction_products#Fabricated_products


7/12



[top]Point-fixed glazing

Point-fixed glazing was first used on Les Serres, Parc de La Villette. The glass panes used on this project are about 2m square and are suspended from a

secondary steel frame.

The panes are joined together at the corners to form the glass enclosure. The wall is supported laterally by

cable trussesalong the horizontal edges of the glass panes via articulated, bolted fixings at each corner. Atjoints in the middle of the wall, four panes come together and the supports have four articulated bolts.

A stiff rod connects back to the cable truss. Silicone pointing seals the joint between the glass panes.

In the example below, glazing is supported from RHSmullions with point-fixings.

A stainless steelthreaded rod provides out of plane adjustment and bending stresses in the glass are

avoided by adopting a ball and socket joint as shown. Positional tolerance is taken up by using oversize

holes in the glazing unit.

Cable stayed mullions

Cable mullions at Changi Airport(Image courtesy of Arup)
http://www.steelconstruction.info/Braced_frameshttp://www.steelconstruction.info/Braced_frameshttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/File:A2-Fig12c.pnghttp://www.steelconstruction.info/File:A2-Fig12.pnghttp://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/Steel_construction_products#Structural_hollow_sectionshttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/Braced_frames


8/12



Glass fins can be introduced instead of steel or aluminium mullions to increase the transparency of a glazed enclosure as shown below. The glass fins provide

lateral support to the glazing in the same way as mullions do. Stainless steelpoint supports connect the faadeglazing to the glass fins.

Point-fixed glazing, Le Serres

(Image courtesy of RFR)

La Villette glazing support bracket

(Image courtesy of Arup)

Point-fixed glazing to RHS mullion
http://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/File:A2-Fig15.pnghttp://www.steelconstruction.info/File:A2-Fig15.pnghttp://www.steelconstruction.info/File:A2-Fig14a.pnghttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/File:A2-Fig15.pnghttp://www.steelconstruction.info/File:A2-Fig14.png


9/12



[top]

This approach can be extended to the whole faadeas illustrated. Stainless steelspiders are bolted to the fins using patch-fittings. A baked-on ceramic frit is

applied to the glazing at floor levels. This provides a feature and hides the construction depth at floor level. It also provides shading to the interior.

Cable supported facades

Cable-supported facadesare used where large expanses of glass are required to enclose large volumes with

Glass fin with bolted fittings Cantilevering fin Glass fin-supported glazing with ceramic frit


Nokia Building, Beijing

http://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/File:A2-Fig19.pnghttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Steel_construction_products#Fasteners_and_fixingshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/File:A2-Fig20.pnghttp://www.steelconstruction.info/File:A2-Fig-18.pnghttp://www.steelconstruction.info/File:A2-Fig-17.png


10/12



limited intrusion from supporting structure. An early example of a cable net supported faade is the

Kempinski Hotel, Munich. A 25m x 40m glass wall supported by a grid of cables at 1.5m centres in each

direction supports the wall. The horizontal cables are tensioned against the adjacent buildings and the

vertical ones between the roof structure and the ground. Fixings clamped to the cables at each crossing

support the glass panes. The centre of the glass wall deflects up to 900 mm under maximum wind loading.

Further details of this building are provided in the Institution of Structural Engineers Guide Structural use of

glass in buildings[1].

A more recent example is the Beijing Poly Plaza building where a glass wall 90m high by 60m wide

designed by Skidmore Owings and Merrill is supported by an orthogonal cable net with stainless steel cables

spaced at 1333 mm horizontally and 1375 mm vertically. Panes of glass of a slightly smaller size (toaccommodate the joints) are clamped in place by stainless steel fittings attached to the cables at their

intersection.

Beijing Poly Plaza

The cable net wall is divided into three sub-sections which are not coplanar as can be seen in the illustration, by large diameter pre-stressed stainless steel

cables to which the orthogonal cable net is clamped. These large cables define the boundaries of the sub-sections and reduce the maximum deflection of the

wall to 900mm. Further details of this cable net wall are presented in SCI publication P396.

The large deflections of the cable nets of the Beijing Poly Plaza and the Kempinski Hotel are achievable because the deformations of the glass panes and theseals at the joints between them are small. The loads causing the deformations are wind loads, applied over large areas of the faade. This means that

abrupt angular changes in the cable net such as would result from point loading do not arise. The edges and particularly the corners of a cable net wall,

Beijing Poly Plaza

(Image courtesy of Tim Griffiths, Skidmore,

Owings & Merrill LLP)

Cable net

(Image courtesy of Skidmore, Owings & Merrill

LLP)

Large diameter cables

(Image courtesy of Skidmore, Owings & Merrill

LLP)
http://www.steelconstruction.info/Design_codes_and_standards#Wind_actionshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/File:A2-Fig21.pnghttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Design_codes_and_standards#Wind_actionshttp://www.steelconstruction.info/File:A2-Fig23.pnghttp://www.steelconstruction.info/File:A2-Fig22.png


11/12



[top]

[top]

[top]

where it abuts the rigid supporting structure, require careful detailing to make sure the deformations can occur without inducing unacceptable stresses in the

glass.

A further example of a cable-supported glass wall is the enclosure at Tower Place, London. A series of horizontal cables tensioned between the building

structures at each end, provides lateral support to the glazed screen. The span of the horizontal cables is reduced by pre-stressed glass tubes, connected to

the columns. The weight of the glass is carried to beams at the roof of the enclosure by vertical tension elements in the joints between the glass panes.

Patch fittings are used to fix the glass to the tension elements.

The cables that form the cable net carry significant tensions and must be connected to structures that are sufficiently stiff and strong to resist these forces.

The cable-net wall of the Beijing Poly Plaza is bounded by stiff reinforced concrete coreson the two vertical sides and by a three-storey high steel trussat

the top. These substantial boundary elements are necessary to resist the tensions in the cables.

The glass wall at the Kempinski Hotel is reported as having a prestress in the horizontal cables of 85 kN each. Eleven cables span the full width of the wall so

these apply a total lateral load of 935 kN (95 tonnes) to the supporting buildings.

It is clearly essential to choose this type of glazed wall early in a project so the appropriate strength and stiffness can be put into the boundary structures.

References

1. ^Structural use of glass in buildings (1999). Institution of Structural Engineers

Resources

SCI P193 Steel supported glazing systems

SCI P396 New Beijing Poly Plaza Cable-Net Wall

See also

Facades and interfaces

Facade supports and structural movements

Steel construction products

Tower Place Patch fittings
http://www.steelconstruction.info/Concept_design#Concrete_or_steel_coreshttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/File:SCI_P193.pdfhttp://www.steelconstruction.info/File:SCI_P396.pdfhttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/Facade_supports_and_structural_movementshttp://www.steelconstruction.info/Steel_construction_productshttp://www.steelconstruction.info/Steel_construction_productshttp://www.steelconstruction.info/Facade_supports_and_structural_movementshttp://www.steelconstruction.info/Facades_and_interfaceshttp://www.steelconstruction.info/File:SCI_P396.pdfhttp://www.steelconstruction.info/File:SCI_P193.pdfhttp://www.steelconstruction.info/Trusseshttp://www.steelconstruction.info/Concept_design#Concrete_or_steel_coreshttp://www.steelconstruction.info/File:A2-Fig25.pnghttp://www.steelconstruction.info/File:A2-Fig24.png


12/12

Documents

Steel-supported Glazed Facades and Roofs - Steelconstruction.info