STEEL SMITH was established in the year of 1980 using extract gained by its promoter Lt. Sh. PRITHVI RAJ SHARMA during his dedicated services given to his family business of same nature for 15 years. Sh. PRITHVI RAJ JI did their diploma in mechanical Eng. in 1960 from ARMY College Roorkee. It is an organization with strong roots in an eventful past and with and clear vision of future. The industry is located on national highway NH-24 in the state of (U.P) at and distance of 20 kms from Delhi. And 5Km from NOIDA.The professional Management of company is committed to achieve excellence in all sphere of our activities namely in house R&D, Manufacturing, machining and quality assurance, STEEL SMITH is always keen to understand of the needs of the customers to serve them better.STEEL SMITH becomes the lead manufacturer of forged flanges in the year 1992. We already supply to Defense, Railways, Sugarmill, Petroleum’s, and Automobile Industries.So, What will the future brings? STEEL SMITH sums it up in two words, More Challenges and the company looks forward to welcome next century and to play.In global market with confidence born of hard-won experience, which used continuously to improve and maintain quality of our products.STEEL SMITH Believes in:-Supplying value added quality products to customers at competitive prices with prompt delivery.Having and trained and motivated team.Having an international identity.Achieving Total quality Management.

For STEEL SMITH  PUNEET SHARMA (CEO)

ProfileProfile

Manufacturing Process ChartManufacturing Process Chart

Technical Details for Manufacturing FacilitiesTechnical Details for Manufacturing Facilities

We are fully equipped with:

1. STEAM HAMMER 8 TON CAPACITY2. STEAM HAMMER 5 TON CAPACITY3. CLOSE DIE HAMMER (1.5 M.T.)4. MASSEY HAMMER (1 M.T.)5. TURNING PRESS (2 M.T.)6. RING HAMMER (8 M.T.)7. HEATING FURNANCE

(A) 13' X 7 ½' X 6 ½' (OIL FIRED)(B) 13 ½' X 8 ½' X 6 ½'(OIL FIRED)(C) 13 ½' X 7 ½' X 6 ½'(OIL FIRED)(D) 5' X 5' X 4' (OIL FIRED)

8. JIB CRANES (10 M.T)9. LANCASHIRE BOILER10. TUBEWELL 4" BORE11. OVERHEAD CRANES (5 M.T.)12. MOBILE CRANES (10 M.T.)

We are fully equipped with:

1. STEAM HAMMER 8 TON CAPACITY2. STEAM HAMMER 5 TON CAPACITY3. CLOSE DIE HAMMER (1.5 M.T.)4. MASSEY HAMMER (1 M.T.)5. TURNING PRESS (2 M.T.)6. RING HAMMER (8 M.T.)7. HEATING FURNANCE

(A) 13' X 7 ½' X 6 ½' (OIL FIRED)(B) 13 ½' X 8 ½' X 6 ½'(OIL FIRED)(C) 13 ½' X 7 ½' X 6 ½'(OIL FIRED)(D) 5' X 5' X 4' (OIL FIRED)

8. JIB CRANES (10 M.T)9. LANCASHIRE BOILER10. TUBEWELL 4" BORE11. OVERHEAD CRANES (5 M.T.)12. MOBILE CRANES (10 M.T.)

Technical Details for Manufacturing FacilitiesTechnical Details for Manufacturing Facilities

CUTTING FACILITIES

1. BANDSAW 650 MM2. BANDSAW 1200 MM 3. BANDSAW 14"4. BANDSAW 16"5. BANDSAW 12"6. BANDSAW 6"

CUTTING FACILITIES

1. BANDSAW 650 MM2. BANDSAW 1200 MM 3. BANDSAW 14"4. BANDSAW 16"5. BANDSAW 12"6. BANDSAW 6"

Technical Details for Manufacturing FacilitiesTechnical Details for Manufacturing Facilities

Heat TreatmentHeat Treatment

Technical Details for Manufacturing FacilitiesTechnical Details for Manufacturing Facilities

Machining DivisionMachining Division

IMPACT TEST TENSILE TESTING Impact strength of forgings is tested to Testing forgings for the mechanical prop.Ensure their ability to withstand shock to confirm their suitability to withstand Loads. Tests are carried out both at room loads carried by them ion service.Temperature & sub-zero temperature. Model: 4TN-10 FIE

Facilities available for proof stress andRecording of load displacement curve.

TESTING CAPABILITIESSTEEL SMITH has comprehensive mechanical testing facilities that include impact testing, tensile testing & non-destructive testing. The organization uses the most advanced equipment such as ultrasonic testing and highly sensitive mobile spectrometer, specialized dye penetrate and magnetic particle technique. HEAT TREATMENT:Our in-house Heat Treatment Capabilities enhances the total control over the manufacture of quality forgings. The facility is capable of most of the required operations for our in house production, and has performed various requirement for specific heat treat needs for our customer base and specific industry requirement. •Annealing•Quench - Tempering•Normalizing•Isothermal Annealing

IMPACT TEST TENSILE TESTING Impact strength of forgings is tested to Testing forgings for the mechanical prop.Ensure their ability to withstand shock to confirm their suitability to withstand Loads. Tests are carried out both at room loads carried by them ion service.Temperature & sub-zero temperature. Model: 4TN-10 FIE

Facilities available for proof stress andRecording of load displacement curve.

TESTING CAPABILITIESSTEEL SMITH has comprehensive mechanical testing facilities that include impact testing, tensile testing & non-destructive testing. The organization uses the most advanced equipment such as ultrasonic testing and highly sensitive mobile spectrometer, specialized dye penetrate and magnetic particle technique. HEAT TREATMENT:Our in-house Heat Treatment Capabilities enhances the total control over the manufacture of quality forgings. The facility is capable of most of the required operations for our in house production, and has performed various requirement for specific heat treat needs for our customer base and specific industry requirement. •Annealing•Quench - Tempering•Normalizing•Isothermal Annealing

Technical Details for In House Testing FacilityTechnical Details for In House Testing Facility

Technical Details for In House Testing FacilityTechnical Details for In House Testing Facility

Despatch FacilitiesDespatch Facilities

Product RangeProduct Range

Product RangeProduct Range

Product RangeProduct Range

Product RangeProduct Range

Product RangeProduct Range

Product RangeProduct Range

Third Party Approvals Third Party Approvals

Industries we are ServingIndustries we are Serving

Quality ApprovalsQuality Approvals