STEEL SECURITY - furnitubes.com · STEEL SECURITY BOLLARDS ... furnitubes steel bollards are 100% recyclable. Standard Options Details of reflective tape, eye-bolts, chain and other

© 2010 Copyright Reproduction Prohibited

TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com

3�B

OLL

AR

DS

STEEL SECURITY BOLLARDSmany of furnitubes fixed steel bollards are also available as ‘anti ram raid’ bollards. these thick-walled versions are set 600mm below ground to provide the ultimate in protection against would-be raiders. the modern-looking Stirling, Kenton and Harrow ranges are embellished with a smoothly domed top to prevent rainwater accumulation and a variety of ring and groove configurations. often, these are used in conjunction with the Burr Bloc (see page 62) to provide a ‘security corral’ at the rear of stores.

because of their size and weight, it is best to paint the final top-coat to security bollards after installation to prevent damage during transit or handling. they can be further enhanced by highlighting specific features in a contrasting colour. for applications that require higher visibility, furnitubes are able to supply or fit reflective tape in either red, white or yellow. see page 78 for further details.

Security Products are available on video CD-ROM Please contact our sales office for your copy

STEEL SECURITYbollards

▲ HARROW Single Neck Removable

▲ KENTON Single Neck Securityhighlighted with reflective tapesupplied to tesco, epping

▲ HARROW Double Ring Security

▲ STIRLING Security ▲ HOLBORN MAJOR MK.2 Security



40B

OLL

AR

DS

fRont eLeVAtion & GRounD LeVeL section 1:25

▲ HARROW Single Ring Baseplatedshown here in north Lane, Aldershot, Hampshire

harrow range – single ring

HAR 211 steel bollard900mm height

options:steel Removablebase Plated 1000mm height for DDA regulations


options:steel Removablebase Plated1000mm height for DDA regulations



HAR 213 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height

options:1000mm height for DDA regulation



see notes 1 & 4see notes 1 & 4see notes 1 & 4see notes 1, 2 & 4

350

900

or 1

000

350

900

or 1

000

600

900

or 1

000

350

900

or 1

000

Ø 140

Ø 170

Ø 170

Ø 195

see notes 3 & 4

Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.

We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

12 kg 23 kg 28 kg 66 kg 35 kg

350

900

or 1

000

HARRoW RAnGe

Finish OptionsAvailable in a primed or galvanised finish. We recommend that top coats are applied on site after installation.

Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. for details see page 59.

Base Plated BollardsWhere in-ground fixing is difficult an optional base plate with 4 fixing holes can be supplied.

FinishGalvanised finish only.

Security Bollardssee Appendices at the back of this catalogue for details of spacing, foundation & installation

Note 3

TECHNICAL

Materialfurnitubes steel bollards are 100% recyclable.

Standard OptionsDetails of reflective tape, eye-bolts, chain and other standard fittings can be found on page 78.

F1 Socketf1 sockets are available as an alternative to our standard socket and are designed to accept Ø115 bollards. see page 60.

Note 2

Disability Consciousbollards installed over 1000mm aid the visually impaired and can assist with the requirements of bs8300.

Note 4

Note 1

Add suffix DDA for bollards over 1000mm, ie: HAR 211 DDA

Ø 115

TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited

41

Ste

el B

olla

rds

harrow range – double ring







HAR 223 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height




see notes 1, 2 & 4

350

900

or 1

000

600

900

or 1

000

350

900

or 1

000

Ø 140

Ø 170

Ø 170

Ø 195



see notes 1 & 4 see notes 1 & 4 see notes 1 & 4

36 kg67 kg28 kg23 kg13 kg

350

900

or 1

000

▼ HARROW Double Ringshown here in Great Dunmow, essex

HARRoW RAnGe

1:25 fRont eLeVAtion & GRounD LeVeL section






Note 3

TECHNICAL




Note 2


Note 4

Note 1

see notes 3 & 4

Add suffix DDA for bollards over 1000mm, ie: HAR 224 DDA

Ø 115

900

or 1

000

350



42B

OLL

AR

DS

Kenton RAnGe



kenton range – single neck

KEN 111 steel bollard900mm height

options:steel Removablebase Plated1000mm height for DDA regulation





KEN 113 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height




350

900

or 1

000

350

900

or 1

000

350

900

or 1

000

600

900

or 1

000

350

900

or 1

000

Ø 115

Ø 140

Ø 170

Ø 170

Ø 195

see notes 1 & 4see notes 1 & 4see notes 1 & 4see notes 1, 2 & 4

19 kg 20 kg 29 kg 60 kg 35 kg

▼ KENTON Single Neckgalvanised finishas supplied to colbayns High school, clacton, essex







Note 3

TECHNICAL




Note 2


Note 4

Note 1

see notes 3 & 4

Add suffix DDA for bollards over 1000mm, ie: KEN 111 DDA


43

Ste

el B

olla

rds



kenton range – double neck







KEN 123 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height




350

900

or 1

000

350

900

or 1

000

350

900

or 1

000

600

900

350

Ø 115

Ø 140

Ø 170

Ø 170

Ø 195

see notes 1, 2 & 4 see notes 1 & 4 see notes 1 & 4 see notes 1 & 4

36 kg60 kg29 kg21 kg19 kg

Kenton RAnGe

▲ KENTON Double Neck Securityshown here at metro Retail Park, Gateshead







Note 3

TECHNICAL




Note 2


Note 4

Note 1

900

or 1

000

900

or 1

000

see notes 3 & 4

Add suffix DDA for bollards over 1000mm, ie: KEN 124 DDA



44B

OLL

AR

DS

600

800

stirling security

STL 102 SCGalvanised steel bollardAnti-Ram Raid Version

options:nylon Plastic coated inblack or Grey. other colours available upon request.

see note 2

20 kg

Ø 102

edgware mk2

EDG 901 steel bollard900mm height

options:base Platedsteel Removable1000mm height for DDA regulation

500

900

or 1

000

Ø 140

see notes 1 & 3

24 kg

sudbury range – single ring

SUD 411 steel bollard900mm height


SUD 412 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height


sudbury – double ring



350

900

or 1

000

350

900

or 1

000

600

900

or 1

000

350

900

or 1

000

120

sq 150

sq

150

sq

200

sq





see notes 1 & 3see notes 1 & 3see notes 1 & 3see notes 1 & 3




SUD 422 SCsteel bollard, Heavy DutyAnti-Ram Raid Version900mm height


45 kg30 kg 50 kg

sudbury – double ring





see notes 1 & 3see notes 1 & 3


Removable Bollards Removable bollards are supplied with a socket & hinged cover plate. the bollard has a fixed spigot that passes through the hinged cover plate and allows an fb14 padlock (not supplied) to secure the bollard in the socket. see page 59.


Note 1



Note 2

TECHNICAL




Note 3

900

or 1

000

350

120

sq

350

900

or 1

000

600

900

or 1

000

350

900

or 1

000

150

sq

150

sq

200

sq

suDbuRY RAnGeeDGWARe secuRitY stiRLinG secuRitY

24 kg 44 kg 25 kg29 kg 49 kg

see notes 2 & 3

see notes 2 & 3

Add suffix DDA for bollards over 1000mm, ie:SUD 422 DDA


45

Iron

& S

teel

Bol

lard

s

'centurian'785 a/g600 b/g170 dia g.l. sectionhigh security type bollardwith internal reinforcement of steel bar & 'A-20 Premier Mix'

holborn security

HOL 510 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish

holborn major security

HOL 520 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish

Ø 170

600

1000

salisbury security

SAL 530 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish

salisbury major security

SAL 540 SCAnti-Ram Raid VersionGalvanised steel body and Root with cast iron caps and Rings,Primed finish

Ø 170Ø 115

telescopic bollards

furnitubes offer a range of steel telescopic bollards. these lockable bollards can be lowered into the ground when not in use.Anti Ram Raid versions are also available

see Access control section on pages 57 - 67.



Note 2



Note 1

Note 4


Disability Consciousbollards installed 1000mm above ground aid the visually impaired and can assist with the requirements of bs8300.

Note 5

see notes 4 & 5

600

1000

600

1000

600

1000

Ø 115

51 kg24 kg45 kg30kg


Removable Bollards two types of socket are available to enable bollards to be converted to make them removable.

Steel Socketsee details on page 59.

F1 Socketsee details on page 60.

Note 3

holborn mk.2

HOL 510 steel main body and Root with cast iron caps and Rings

options:Removablebase Platedstainless steel - see page 55

holborn major mk.2

HOL 520 steel main body and Root with cast iron caps and Rings

options:Removablebase Platedstainless steel - see page 55

Ø 170

285

1000

salisbury mk.2

SAL 530 steel main body and Root with cast iron caps and Rings

options:Removablestainless steel - see page 55

salisbury major mk.2

SAL 540 steel main body and Root with cast iron caps and Rings

options:Removablestainless steel - see page 55

Ø 170Ø 115

see notes 1, 3 & 5 see notes 1, 3 & 5see notes 1, 2, 3 & 5 see notes 1, 2, 3 & 5

320

1000

305

1000

340

1000

Ø 115

46 kg19 kg40 kg23 kg

see notes 4 & 5 see notes 4 & 5 see notes 4 & 5

TECHNICAL

Materialfurnitubes steel and composite bollards are 100% recyclable.


HoLboRn RAnGe sALisbuRY RAnGe



66

TELESCOPICsecurity posts

for those that need security bollards that can be lowered into the ground when not in use, furnitubes range of telescopic bollards combine strength with aesthetic appeal to provide this dual function. telescopic bollards meet the requirements of a wide variety of security needs, from preventing access to driveways to stopping ram raid attacks.

the bollards are designed for ease of use, taking just seconds to raise each one and lock into place using its integral high security lock. When not in use the post is completely concealed, sliding discretely into the ground where it is covered by a steel flap.

▲ TPR 800Round Telescopic Bollardin raised and lowered positions

the majority of the range is available in a galvanised or polyester powder coated finish.

A stainless steel version is now also available, to compliment furnitubes existing range of stainless steel bollards and other street furniture.

▲ TPS 700Square Telescopic Bollardin raised position

▲ TPR 600Round Telescopic Bollardblack Powder coated finishshown at Westwood cross, Kent

▲ TPR 300Round Stainless Steel Telescopic Bollardin raised position and top detail

▼ T

PR 6

00 G

alva

nise

d St

eel T

eles

copi

c Bo

llard

in r

aise

d po

sitio

n


67

Tele

scop

ic S

ecur

ity B

olla

rds

for a more traditional look a Victorian style ornamental top is available for some of the bollards. the top locks into place when the bollard is in the raised position and is removed when it is lowered.

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

driveway telescopic

TPR 576steel, Galvanised and Polyester Powder coated black or Yellow

options:other bs or RAL colours available

round telescopic

TPR 700steel, Galvanised finish

options:Polyester Powder coatedornamental locking top

TPR 800Anti Ram Raid versionsteel, Galvanised finish

options:Polyester Powder coatedornamental locking top

square telescopic

TPS 700steel, Galvanised finish

options:Polyester Powder coated

TPS 800Anti Ram Raid versionsteel, Galvanised finish

options:Anti-cut 100mm squarePolyester Powder coated

ornamental locking top

CT 001Victorian-style cast Alum cap Polyester Powder coated black with Rings Highlighted in Gold

for use with the Polyester Powder coated versions of the TPR 700 & TPR 800 onLY

furnitubes now offer a tough new Polyurethane elastomer (Pu) Anti-Ram Raid telescopic bollard. the durable Pu is cast around a reinforced steel core that offers low maintenance coupled with excellent resistance to the weather and many other types of abrasion.

TECHNICAL

Keyseach post is supplied with one key.Please specify whether all posts are required keyed alike or to have individually numbered locks. Additional keys can be supplied as optional extras.

Installationfor the best protection of a building, bollards should be installed no less than 1.3m from the fascia to be protected.A distance from centre to centre of bollards of 1.25m is recommended, and should not exceed 1.4m. Lifting weightsthe lifting weights for the telescopic bollards are as follows:TPR 576 - 8 kgTPS 700 - 12 kgTPS 800 - 14 kgTPR 700 - 12 kgTPR 800 - 14 kgTPR 390 - 14 kgTPR 600 - 17 kgTPR 300 - 22 kgTPB 725 - 22 kg

Foundationto ensure sufficient drainage. a combination of concrete and loose chippings will be required. see page 346 for more information.

stainless steel telescopic

TPR 390Anti Ram Raid bollardstainless steel, satin finish

large round telescopic

TPR 600steel, Galvanised finish

options:Polyester Powder coated finish

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

580

810

670

960

670

960

850

1140

670

960

ø 76

ø 89 90

ø 114

1140

850

ø 114

ø 89

bury - pu telescopic

TPB 725telescopic Anti Ram Raid bollardPolyurethane elastomer formedaround a steel inner coretwo-Pack Polyurethane Gloss finishsteel telescopic socketGalvanised finish

▲ TPB 725Bury PU Telescopic Bollard

1:20 isometRic VieWs


We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.

teLescoPic secuRitY Posts

options:fixed bollard

TPR 300stainless steel, satin finish

Documents

STEEL SECURITY - furnitubes.com · STEEL SECURITY BOLLARDS ... furnitubes steel bollards are 100% recyclable. Standard Options Details of reflective tape, eye-bolts, chain and other