STEEL

libertyhousegroup.com

AMS 5629 (13-8MoPH)13%Cr 8%Ni precipitation hardening stainless steel Double Vacuum Melted (VIM + VAR).For applications where corrosion resistance and high strength are required.

Heat treatment

• Solution treat at 927°C cool below 15°C

• Age at appropriate temp for relevant “H” condition

• (H_ condition aged at _°F)

Related specifications

1.4534

Supply condition and availability

• Supplied as solution treated bright machining quality bar

• Also available on request aged to specific “H” conditions

• Stock sizes range in 12.7mm - 250mm diameter

• Other sections available on request

AM

S 5629 (13-8MoPH

) | 13%

Cr 8%N

i Precipitation Hardening Stainless Steel

LIBERTY SPECIALITY STEELS7 Fox Valley Way, Stocksbridge, Sheffield, S36 2JA, United Kingdom

T: + 44 (0) 114 288 2361 E: contactus@specialityuk.com

While care has been taken to ensure that the information contained in this publication is accurate, Liberty House Group does not accept responsibility or liability for information which is found to be misleading. ©Copyright 2018 Liberty House Group.

Chemical analysis

C Si Mn P S Cr Mo Ni Al N

Min - - - - - 12.25 2.00 7.50 0.90 -Max 0.05 0.10 0.10 0.010 0.008 13.25 2.50 8.50 1.35 0.010

Features and benefits

• Medium to high strength developed by appropriate ageing treatment

• Corrosion resistant

• Excellent transverse properties

Typical applications

Fasteners

Technical support

We have a comprehensive technical support team available to advise on grade selection and product range to achieve the maximum benefit. Customer Technical support provide specialist advice and help with day-to-day problem solving.

Works based metallurgists and the full resources of our Steel Research and Development Laboratories are available to assist with longer-term developments.

For further information, enquiries or any technical guidance on our range of Aerospace products please contact our experts using the details below.

Mechanical properties of typical specifications Mechanical properties are AMS 5659 (15-5PH) limits

H950 H1000 H1025 H1050 H1100 H1150

0.2% proof stress MPa

Long. 1517 1413 1276 1207 1034 931

Trans. 1517 1413 1276 1207 1034 931

Tensile strength MPa

Long. 1413 1310 1207 1138 931 621

Trans. 1413 1310 1207 1138 931 621

Elongation %Long. 10 10 11 12 14 14

Trans. 10 10 11 12 14 14

Reduction of area%

Long. 45 50 50 50 50 50

Trans. 35 40 45 45 50 50