statement of purpose_1

Embed Size (px)

Citation preview

  • 8/7/2019 statement of purpose_1

    1/3

    STATEMENT OF PURPOSE

    Albert Einsteins intriguing words, Problems cannot be solved at the same level of

    awareness that created them. formed the corner stone of my aspirations to pursue

    graduate studies, because a high level of education enhances a persons rationalityand consequently his level of awareness. .

    At the culmination of high school I developed a profound affinity towards

    Mathematics & Physics Because of their logical & analytical nature and wide spread

    practical implications to which my graduation certificates hold testimony. I got to

    know the concepts of a semiconductor during the final year at school and very the

    idea of being able to alter the conductivity of a semiconductor just by varying the

    amount of doping and its futuristic applications attracted me, what followed was the

    natural course of events I decided to take Electronics & Telecommunications at the

    undergraduate level

    Ever since Electronics has always been a passion for me. As I delved into the realm

    of electronics, my initial fascination turned into one of unquenchable obsession. My

    under graduate program had lots to offer in areas such as Control Systems, Digital

    Signal Processing, Satellite Communication, VLSI Design & Circuits, Analog

    Communication, Micro Processor & Application. Each field in my discipline attracted

    me in its own way; but the fields that appealed to me most were courses in

    Control Systems which was introduced in the second year of undergraduate study

    and then Mechatronics in the subsequent year. Major part of both the courses were

    imparted by Prof. M.J. Khurjekar ,a higly experienced member of the faculty and a

    pioneer in this field with long term industrial experience , his curiosity and interest in

    the field really motivated me to take up Control Systems at the graduate level .I got

    to learn a lot in the classes and lab sessions conducted by him. The first session in

    the labs was devoted to developing simple programs for a Simatic PLC. A

    combination of AND, OR blocks generating a complete control circuit for a motor

    fascinated me. During the subsequent classes I became familiar with concepts

    Ladder diagrams,Actautors,CNC which only affirmed my decision to take up Control

    Systems at the graduate level .

    The field of control system has a widespread presence in heavy industries from a

    design of a simple coffee vending machine to a state of the art PC controlled

    robotic arm and i believe there are still other avenues like using automated bots to

    streamline the production in the workshops, work in hazardous environments, areas

    like an automobile manufacturing unit which require a high degree of precision and

    high production values could explored, which is exactly why i would like to pursue

    my graduate level study in control systems at ______. I want to hone my skills as a

    professional of the industry while at the same time contribute my bit in the research

    in this field

  • 8/7/2019 statement of purpose_1

    2/3

    To make myself thorough with the very basics of the field i am presently undertaking

    a certificate course in PLC Programming. The course entails the fundamentals of

    Allen Bradley & Siemens PLC, SCADA, Human Machine Interface & Distributed

    Control Systems

    Besides core electronics i also got to learn the concepts of Optical & Microwave

    communications in a course on the same and then even got to implement some of

    them during my summer internship at LAMBDA MICROWAVE SYSTEMS located

    at New Delhi, which primarily deals with the designing and installation of antennas

    for microwave application ,in all it was an exhaustive experience,being a first in the

    corporate world. During the time of my internship the company had decided to

    venture into the areas of developing wireless transreceivers so I was assigned a

    project in the R&D unit of the company where in I worked on the designing of a

    wireless FM transmitter receiver system,it was a challenging task as it required

    detailed knowledge of the concepts of selectivity, sensitivity, fidelity & gain of the

    receiver besides also learnt about the fabrication techniques of the PCBs for the

    communication circuits, the various design aspects.

    My final year project work was entitled A DSP based Deaf Alarm System for peoplewith hearing imparity although it was not related to Control Systems it required anextensive knowledge of the concepts of Signal Processing. The aim was to fabricate anintegrated alarm system which would alert the people with this imparity to varioussound related events like a fire alarm ,door bell when they are all by themselves at

    home.

    The system basically consists of a DSP processor, a microphone unit which takes inputfrom various audible sound sources like door bell etc and passes it on to the processor(TMS320c5416) which was programmed to distinguish between the signals on thebasis of their FFTs and PSD ,once deciphered the detected signal was transmitted to amobile body worn receiver via a transmitter module .

    The processor was interfaced with the mic to accept the real time signals . We usedCode Composer Studio to dump the code in the processor but to guard the alarmsystem against false triggering in the presence of AWGN was a real challenge ,so wecarefully found out the peak frequencies of each input and then logically coupled themwith guard bands. In due course of completion of the project the difficulties faced by meand group members taught us valuable lessons perseverance and out of the boxthinking . The project has a lot of scope for the future with a litle more effort thesealarms could come in as handy and cheaper alternatives to the hearing aids.

    I have always been actively involved in co curricular and extra curricular activities.Ihave represented my college cricket team at various intra & inter universitytournaments. I have been an active member of the organizing committee for the annual

    college technical meet and social gathering.

  • 8/7/2019 statement of purpose_1

    3/3

    I browsed extensively through your web pages and discovered that your researchareas seemed to match in the most coherent way with my areas of specialization, viz,

    Control Systems & allied courses in automation. I feel that under your able guidanceand tutelage, I would realize my long cherished dreams and ambitions.

    I have performed considerably well academically till now.I graduated both high school& undergraduate degree with good grades but I still believe there is room forimprovement and I would like to assure you that if given an opportunity to be a part ofthe prestigious _____________ I am prepared to work with utmost diligence anddedication in order to excel in all my areas of work and be a responsible entity of theuniversity.

    I look forward to being a part of your university.

    Prateek Bajaj