(State & Zip Code)...18323 Cty Hwy 21/Detroit Lakes: MN/56501 218-847-4587: Jeff Adkins Bobcat of Bemidji: 0000251301/001 3516 Irvine Ave N/Bemidji: MN/56601 218-751-4660: Dave Neilsen

SEQ. #416-1216 MINNESOTA PRICING PAGES(Typed Responses Required)

December 2016

Aftermarket Tractor/Skidsteer Attachments

Price quote for: Aftermarket Tractor/Skidsteer Attachments

Vendor Name:Contact Person:Street Address:

P.O. Box:City, State, Zip

Phone #:Toll Free #:

Fax #:Email Address:

1.0 Manufacturer's Name:

Attachment Description:

Warranty Term (months, years):

Percent Discount (%) to be applied to Price List:

Date & I.D. of the Price List:

2.0 Delivery Charges:(SEE SPECIAL TERMS AND CONDITIONS)

DELIVERY STARTING POINT (City)(State & Zip Code)

Price Per Loaded Mile

Minimum Delivery Charge

3.0 Price for additional Service Manual:

Price for additional Parts Manual:

4.0 Installation Services - Per Hour (Shop Labor Rate) $90 Installation services may be requested on an "as needed" basis.(See Special Terms and Conditons)

No Charge

No Charge

888-443-3639952-469-5269

32%

Schulte 2019 7ft-18ft_Rotary Cutters USA1.16.19.pdf

NO FLAT RATE ALLOWED

$0.85

Englefeld

6 Months

Saskatchewon, S0K 1N0

7' to 18' Rotary Cutters

Edney Distributing Co., Inc.Dave Mosier8485 215th St W1236

Schulte

[email protected]

Lakeville, MN 55044952-469-5267

mailto:[email protected]

RESPONDER'S NAME: Edney Distributing Co., Inc.

SWIFT EVENT NUMBER: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS, T-632 Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will providethe required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions beforeany State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., 0000123456-001.

COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAMEEdney Distributing Co., In 0000215024/003 8485 215th St W/Lakeville MN/55044 952-469-5267 Mike PetersAdkins Equipment, Inc. 0000208093/001 18323 Cty Hwy 21/Detroit Lakes MN/56501 218-847-4587 Jeff AdkinsBobcat of Bemidji 0000251301/001 3516 Irvine Ave N/Bemidji MN/56601 218-751-4660 Dave NeilsenBobcat of Duluth 0000236269/002 4610 W Arrowhead Rd/Duluth MN/55811 218-727-7377 Dan LindeButler Machinery 0000204147/001 3401 33rd St S/Fargo ND/58104 701-298-1749 Troy DeWiteJaycox Implement 0000194422/001 410 West Roehn/Luverne MN/56156 507-283-2319 Mark OmmenKesteloot Enterprises 0000295830/001 2517 Co. Rd 8/Marshall MN/56258 507-532-0100 Daren KestelootKibble Equipment 0000364257/001 1150 South Victory Dr/Mankato MN/56001 507-387-8201 Ken WagnerLano Equipment 0000213525/001 1015 Hwy 212 W/Norwood MN/55368 952-467-2181 Jack LanoLano Equipment 0000193199/003 6140 Hwy 10/Anoka MN/55303 763-307-2811 Scott FaheyMelrose Implement 0000802356/001 Hwy 13 South/Melrose MN/56352 320-256-4253 Dave WenkerMid-Central Equipment 0000232112/001 50106 US Hwy 210 W/Henning MN/56551 218-583-4124 Dick TranaMiller-Sellner Implement, In0000198622/001 22024 State Hwy 4/Sleepy Eye MN/56085 507-794-2131 Doug MillerMinnesota Equipment 0000197372/001 13725 Main St/Rogers MN/55374 763-428-4107 Dan ScharberNelson Equipment 0000210256/001 17270 US 59/Thief River Falls MN/56701 218-681-1997 Joel NelsonNiebur Tractor & Equipmen 0000268650/001 14380 240th St E /Hastings MN/55033 651-437-3531 Dan BeisselNorthland Farm Systems 0000208304/001 3695 Hoffman Dr N/Owatonna MN/55060 507-451-3131 John LoseeOlson Power and Equipmen0000197590/001 38560 14th Ave/North Branch MN/55056 651-674-4494 Dan OlsonRDO Equipment 0000199158/011 1254 S. Tower Rd/Fergus Falls MN/56537 701-526-6665 Jason HintermeisterRDO Equipment 0000199158/013 110 Michael St/Hawley MN/56549 701-526-6665 Jason HintermeisterRDO Equipment 0000199158/010 2900 Main Ave SE/Moorhead MN/56560 701-526-6665 Jason HintermeisterSEMA Equipment, Inc. 0000197244/001 11906 Hwy 14 E MN/55972 507-259-2240 Doug EricksonPlainview Equipment 0000197244/002 RR1 Box 221A MN/55964-9775 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/003 1013 S Section Ave MN/55975-0106 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/004 55083 County RD 4 MN/55964 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/005 2001 4th St NW MN/55912 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/006 11555 Hwy 60 Blvd MN/55983 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/007 610 W Main St MN/55951 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/008 32980 Northfield Blvd MN/55075 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/009 201 N Hwy 44/76 MN/55921 507-259-2240 Doug EricksonSmiths Mill Implement,Inc. 0000197059/001 63065 206th St/Janesville MN/56048 507-234-5191 Rick EichhorstTitan Machinery 0000251892/015 6340 Hwy 101/Shakopee MN/55379 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/004 315 Hwy 28 E/Graceville MN/56240 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/010 500 Ingersoll Ave/Crookston MN/56716 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/023 2491 St Hwy 200/Ada MN/56510 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/011 17108 US Hwy 59 NE/Thief River Falls MN/56701 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/012 207 South Borud St/Winger MN/56592 952-445-5400 Brenden HonebrinkTjosvold Equipment 0000202238/001 5352 285th Ave/Granite Falls MN/56241 320-564-2331 Jon TjosvoldTruman Welters Tractor an 0000193702/001 1600 Hwy 55 E/Buffalo MN/55313 763-682-2200 Seth StrehlerWabasha Implement 0000212699/001 840 N Wabasha/Plainview MN/55964 507-534-2004 Jack Decker

MASTER PRICE SHEET

USA MACHINE PRICES AND SPECIFICATIONS Effective January 1, 2019

Price USA WT(lbs)

C318‐100 Schulte FX‐318, Basic Unit 13,741.00 5,593S000‐085 Safety Light Kit (Required) 412.00 30

Choose a Drive Package:

a) C318‐735 Drive Package, CW Center, 540 RPM 5,281.00 in base

b) C318‐720 Drive Package, CW Center, 1000 RPM 5,252.00 in base

Note: If using Equal Angle Hitch Skip to Selection 3

C185‐180 Trailing Hitch, CV Style Required 740.00 204Choose a CV Shaft:

a) 340‐870WG CV Shaft, 540 RPM 1,223.00 74b) 340‐648WG CV Shaft,44E tractor Shaft 1‐3/8 Z21 ‐ 1000 RPM 1,002.00 60c) 340‐658WG CV Shaft,44E tractor Shaft 1‐3/4 Z20 ‐ 1000 RPM 1,328.00 60

Choose a Clevis:

C000‐506WG Open Clevis (Minimum Requirments) 330.00 11C000‐560WG Adjustable Clevis 492.00 15C000‐500WG Precision hitch 595.00 28C000‐513WG Solid Tongue 330.00 13C000‐510WG Pro Level Hitch 492.00

C185‐196 Equal Angle Hitch Kit w/ 540 RPM Shaft c/w Non CV Drive Shaft 2,277.00 250

CUTTER FEATURES‐ 540/1000 RPM 80⁰ CV Drive ‐ Replaceable Skid Shoes‐ 540 Equal angle non cv drive ‐ Height Control Cylinder & Hoses‐ 7 ga Single Domed Deck and Stump Jumpers ‐Wing Lift Cylinders & Hoses‐ Rubber 3 Puck Grommet Suspension ‐ 1.75" to 16.75" (44.5mm to 425mm) Cutting Height‐ 90 HP Recommended Tractor ‐ Over Center Folding Wings‐ Cutting Width 216" (5.5m) ‐ Transport Width (max with duals on wings) 96"(2.4m)

~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package ~ ~

~ ~ Selection 2 Trailing Hitch ~ ~

~ ~ Selection 3 ~ Equal Angle Hitch ~ ~

FX‐318 Pan Unit ROTARY CUTTER

MASTER PRICE SHEET


C318‐500 Chain Guards Single Front and Rear 917.00

C318‐550 Chain Guards Double Front and Rear 1,252.00

C318‐560 Front Half Belting 311.00

C318‐570 Rear Half Belting 351.00

C318‐580 Front Full Belting 376.00

C318‐590 Rear Full Belting 396.00

C318‐450 Pan Kit (required) 1,795.00

C318‐460 Updraft Blades, CW Center 347.00

C318‐470 Shredder Blades, CW Center (optional) 570.00

C318‐870 Wing Wheel Standard, 1 or 2 Tires Required 1,656.00

C180‐115 Dual Wheel Standard on the Center Required 1,235.00 237

C180‐484 Axle Kit for 4 Tires 587.00 66C180‐486 Axle Kit for 6 Tires 881.00 99C180‐488 Axle Kit for 8 Tires 1,172.00 132

Please state the quantity of tires that you would like to order as the numbers listed below are single tires and not tire kits.

210‐003WG Solid Laminated Tires, 6 x 9 x 20 214.00 70210‐175WG Forklift Tire 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim 294.00 40210‐175FWG Foam Filled Forklift Tire 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim 503.00

210‐540WG Tire 24x8‐14 20 Ply Severe Duty 371.00 70210‐540FWG Tire 24x8‐14 20 Ply Severe Duty Foam Filled 551.00

(Must be used with a chain option)



~ ~ Selection 7 ~ Choose a Both Wheel Standard Kits ~ ~

~ ~ Selection 4 ~ Choose a Chain Guards ~ ~

~ ~ Selection 5 ~ Choose a Pan Kit ~ ~

~ ~ Selection 6 ~ Choose a Blade Configuration ~ ~

~ ~ Selection 8 ~ Choose a Axle Kit ~ ~

~ ~ Selection 9 ~ Choose a Tire Option ~ ~

MASTER PRICE SHEET


C318‐NA North American & Australian Decal Kit 38.00

C185‐310 Independent Wing Lift 179.00

Assembly Charge Net 300.00

IMPORTANT:

1) Safety Chain Kit must be used at all times when moving equipment on any type of road.

2)

PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands atall times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowingpurposes. Single chain guards may be used for agricultural purposes only and are specifically not recommendedfor highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object ShieldMessage in the Rotary Cutter Spec section in sales price book.

~ ~ Selection 10 ~ Choose a Destination Code ~ ~


~ ~ Selection 11 ~ Choose Extra Options ~ ~

MASTER PRICE SHEET


Price USA WT(lbs)

C318‐001 Schulte FX‐318, Basic Unit (Required) 15,105.00 5,593S000‐085 Safety Light Kit (Required) 412.00 30




Note: If using Equal Angle Hitch Skip to Selection 3

C185‐180 Trailing Hitch, CV Style Required 740.00 204Choose a CV Shaft:

a) 340‐870WG CV Shaft, 540 RPM 1,223.00 74b) 340‐648WG CV Shaft,44E tractor Shaft 1‐3/8 Z21 ‐ 1000 RPM 1,002.00 60c) 340‐658WG CV Shaft,44E tractor Shaft 1‐3/4 Z20 ‐ 1000 RPM 1,328.00 60

Choose a Clevis:


C185‐196 Equal Angle Hitch Kit w/ 540 RPM Shaft c/w Non CV Drive Shaft 2,277.00 250

CUTTER FEATURES‐ 540/1000 RPM 80⁰ CV Drive ‐ Replaceable Skid Shoes‐ 540 Equal angle non cv drive ‐ Height Control Cylinder & Hoses‐ 7 ga Single Domed Deck and Stump Jumpers ‐Wing Lift Cylinders & Hoses‐ Rubber 3 Puck Grommet Suspension ‐ 1.75" to 16.75" (44.5mm to 425mm) Cutting Height‐ 90 HP Recommended Tractor ‐ Over Center Folding Wings‐ Cutting Width 216" (5.5m) ‐ Transport Width (max with duals on wings) 96"(2.4m)


~ ~ Selection 2 Trailing Hitch ~ ~

~ ~ Selection 3 ~ Equal Angle Hitch ~ ~

FX‐318 Fixed Knife ROTARY CUTTER

MASTER PRICE SHEET


C318‐510 Chain Guards Single Front and Rear 1,017.00

C318‐520 Chain Guards Double Front and Rear 1,298.00

C318‐560 Front Half Belting 311.00

C318‐570 Rear Half Belting 351.00

C318‐580 Front Full Belting 376.00

C318‐590 Rear Full Belting 396.00

C318‐225 Fixed Knife and Blade Kit, Updraft Bottom Blades 2,441.00

C318‐240 Fixed Knife and Blade Kit, Flat Bottom Blades (for Cotton) 2,482.00

C318‐870 Wing Wheel Standard, 1 or 2 Tires Required 1,656.00

C180‐115 Dual Wheel Standard on the Center Required 1,235.00 237








~ ~ Selection 6 ~ Choose a Both Wheel Standard Kits ~ ~

~ ~ Selection 4 ~ Choose a Chain Guards ~ ~




MASTER PRICE SHEET



C318‐920 Crop Dividers (Used in Cotton) 254.00

C185‐310 Independent Wing Lift 179.00


IMPORTANT:


2) OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands atall times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowingpurposes. Single chain guards may be used for agricultural purposes only and are specifically not recommendedfor highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object ShieldMessage in the Rotary Cutter Spec section in sales price book.

~ ~ Selection 9~ Choose a Destination Code ~ ~



Effective January 1, 2019

- 7GA deck - Residue distribution tailboard - Replaceable deck protection rings- Transport width of 99" - Variable position shrouding - Single domed, sweep clean deck- 4 gearbox drive layout - Fixed knife technology - Two piece replaceable skid shoes- Optional belting front or rear - Category 5 & 6 drivelines - Pentagon blade bolt design- Hyd Phasing lift system - Rubber suspension - standard - Optional dbl safety chains front or rear- 517 Hubs and axles - Speed levelling system - Full floating front hitch

Price USA Wt/lbs1) C316‐100 FX‐315 Rotary Cutter 16,927.00 3,630

2) S000‐095 Safety Light Kit (Required) 426.00

a) C306‐705 Drive Package, CW Center, 540 RPM 5,517.00

b) C306‐715 Drive Package, CW Center, 1000 RPM 5,484.00

Must Choose the Center Back Beam

1) C316‐115 Standard Back Beam 1,589.00 222

1) C316‐180 Trailing CV hitch Kit 928.00 139Choose a Clevis:

a) CS01‐106WG Open Clevis 138.00 11

b) C000‐360WG Adjustable Clevis (Not Required with FLX15 or FLX10) 299.00 15

c) C000‐300WG Precision hitch 442.00 29

d) C502‐113WG Solid Tongue (Not Required with FLX15 or FLX10) 124.00 13

e) C502‐815WG Clevis with 2 3/16" Opening 142.00 13

Choose a Tractor Shaft:

a) 340‐870WG CV Shaft, 540 RPM 1,223.00 75

b) 340‐648WG CV Shaft, 1000 RPM 1,002.00 62

2) C316‐185 Equal Angle Non‐CV hitch Kit w/ 540 RPM Shaft 2,425.00 260

3) C316‐196 Parallel Ring hitch 1,265.00 224

a) 230‐015WG Pintle Ring, Forged, PT‐48 (Installed on Parallel Hitch) 129.00

Choose Tractor Shaftb) 340‐648WG CV Shaft, 1000 RPM 1,002.00 60

4) C316‐195 German high hitch 1,745.00 270

a) 230‐015WG Pintle Ring, Forged, PT‐48 (Installed on German High Hitch) 129.00

Choose Tractor Shaft

b) 340‐648WG CV Shaft, 1000 RPM 1,002.00 62

MASTER PRICE SHEETS

USA MACHINE PRICES AND SPECIFICATIONS

STANDARD & OPTIONAL CUTTER FEATURES

~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package & Back Beam ~ ~

~ ~ Selection 2 ~ Choose a Hitch Type and Accessories ~ ~

FX‐315 ROTARY CUTTER


Price USA Wt/lbs

1) C316‐215 Regular Skids 239.00 15

1) C316‐500 Chain Guards Double Front 789.00 280

2) C316‐510 Chain Guards Double Rear 688.00 202

3) C316‐550 Full Front Belting 385.00 112

4) C316‐560 Full Rear Belting 274.00 88

5) C316‐320 Residue Distribution Tailboard 2,402.00 323

Recommended with C316‐460

IMPORTANT: Safety Tow Chain Kit must be used at all times when moving equipment on any type of road.

IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors,or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guardsfor all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically notrecommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the ThrownObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.


MASTER PRICE SHEETS

NOTE: Any combination of chains &

belting can be used

NOTE: When ordering Residue

Distribution Tailboard NO rear

guards are needed


~ ~ Selection 3 ~ Choose a Skid ~ ~

~ ~ Selection 4 ~ Choose a Safety Guard Kit ~ ~

Price USA Wt/lbs1) C316‐450 Pan Kit 1,376.00 123

Choose a blade configuration

a) C316‐451 Updraft Blades, CW Center 332.00 35b) C316‐453 Shredder Blades, CW Center 559.00 64

Optional

a) C316‐455 Bolt‐On Deck Ring Option for Pan Kit 720.00 113

2) C316‐460 Fixed Knife Bars, Blades (Updraft), Mounts, CW Rotation on Center 2,278.00 213

3) C316‐220 Variable Position Shrouding (recommended with C316‐460) 1,015.00 64

1) C316‐484 Axle Kit for 4 Tires 639.00 36

2) C316‐486 Axle Kit for 6 Tires 1,275.00 50

3) C316‐488 Axle Kit for 8 Tires 1,881.00 66

1) 210‐003WG Solid Laminated Tire, 6 x 9 x 20 214.00 28

2) 210‐540WG Tire 24x8‐14 20 Ply Severe Duty 371.00 32

3) 210‐540FWG Tire 24x8‐14 20 Ply Severe Duty Foam Filled 551.00

4) 210‐175WG Tire Assy, Forklift, 6.50x10‐12 Ply Rated on 2pce Bolt Rim 294.00 18

5) 210‐175FWG Foam Filled Forklift Tire 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim 503.00

MASTER PRICE SHEETS



FX315 ROTARY CUTTER

~ ~ Selection 5 ~ Choose Pan Kit or Fixed Knife Blade Configuration ~ ~

~ ~ Selection 6 ~ Choose An Axle Kit ~ ~

~ ~ Selection 7 ~ Choose A Tire Option ~ ~



Please select the destination of the cutter for proper Decals, Manuals and CE Shielding Upgrade.

Price USA Wt/lbs

1) C316‐NA North American English Destination Kit 457.00

2) C316‐FR France Destination Kit 548.00

3) C316‐DE German Destination Kit 537.00

1) C316‐200 Chock Blocks 276.00 50

2) C316‐205 Light Mount Plates, France 50.00 13


OPTIONAL PDI INCLUDES: greasing of all pivot points, gearbox oil checked, charge hydraulic cylinders and install pioneer ends. Tires will be installed where necessary. It is the dealers responsibility to remove shipping brackets & banding as well as to adjust mower height as specified in the operators manual. Please go to the Schulte website/dealer access for further information.

MASTER PRICE SHEETS



~ ~ Selection 9 ~ Extra Options ~ ~

FX315 ROTARY CUTTER


- 7GA deck - Single domed, sweep clean deck - S000-010 safety chain kit 1/4" grade 70- Two piece replaceable skid shoes - Rubber suspension - standard with 10,000 lbs capacity- Double safety chains front & rear - Four gearbox drive layout - 1/4" Round skid pans (Stump Jumpers)- Walking axles on center section 210hp down, 260hp splitter - Pentagon blade bolt design- Hydraulic phasing lift system - Full floating front hitch - Operator's manual in holder- Hydraulic wing lift system - Inboard rotation- 517 Hubs and axles - Deck protection rings

Price USA Wt/lbs

1) C308‐100 Basic 15' Unit , S000‐085 required in North America, but not needed with FLX‐1510 20,546.00 4,795



a) C308‐705 5,406.00

b) C308‐715 5,401.00

c) C308‐700 5,385.00

d) C308‐710 5,413.00

1) C308‐180 Trailing Hitch CV Style 740.00 138

Choose a Clevis:

a) C000‐506WG Open Clevis (Minimun Requirement) 330.00 12

b) C000‐560WG Adjustable Clevis 492.00 15

c) C000‐500WG Precision Clevis (not required with FLX‐1510) 595.00 29

d) C000‐513WG Solid tongue (not required with FLX‐1510) 330.00 13e) C000‐515WG Clevis 2 3/16 " opening 353.00 13f) C000‐510WG Pro Level Hitch 492.00


a) 340‐870WG CV Shaft, 540 rpm 1,223.00 77

b) 340‐648WG CV Shaft, 1000 rpm 1,002.00 60c) 340‐658WG CV Shaft 1000 RPM 1 3/4" shaft 1,328.00

2) C306‐196 2,504.00 260(Not Available with FLX‐1510)

NON CV EQUAL ANGLE HITCH C/W 540 SHAFT

MASTER PRICE SHEETS


CUTTER FEATURES

CW Rotation Center 540 RPM (Std. Rotation)

CW Rotation Center 1000 RPM (Std. Rotation)

OR CCW Rotation on Center 540 RPM (Non Std Rotation)

OR CCW Rotation on Center 1000 RPM (Non Std. Rotation)

XH1500 Series 4 Rotary Cutter

~ ~ Selection 1 ~ Choose a Basic Unit and Drive Package ~ ~



Price USA Wt/lbs

1) C308‐450 2 Blade Pan Kit ‐ cw Schulte Super Suction Updraft 4" Blades 1,940.00 400

2) C308‐451 2 Blade Pan Kit ‐ ccw Schulte Super Suction Updraft 4" Blades 1,940.00

3) C308‐452 2 Blade Pan Kit ‐ cw Basic Suction Updraft 4" Blades 1,940.00

4) C308‐453 2 Blade Pan Kit ‐ ccw Basic Suction Updraft 4" Blades 1,940.00

5) C308‐454 2 Blade Pan Kit ‐ Bush Blades Non Updraft 2,078.00

6) C308‐455 2 Blade Pan Kit ‐ cw Schulte Super Suction Updraft 5" Blades 2,021.00

7) C308‐456 2 Blade Pan Kit ‐ cw Schulte Super Suction Updraft 5" Blades 2,014.00

1) C308‐870 Single Axles for Wings (6 Tires required) 1,591.00 161

2) C308‐875 Walking Axles for Wings (8 Tires Required) 2,728.00 315

Please state the quantity of tires that you would like to order as the numbers listed below are just single tires and not a tire kit.

Price USA Wt/lbs PRICE PER TIRE

1) 210‐003WG Solid Laminated Tire, 6 x 9 x 20 214.00 702) 210‐540WG Tire 24x8-14 20 Ply Severe Duty 371.00 703) 210‐540FWG Tire 24x8-14 20 Ply Severe Duty Foamed Filled 551.00

4) 210‐175WG Forklift Tire 6.5x10 - 12 Ply Rated 294.00 185) 210‐175FWG Foam Filled Forklift Tire 6.5 x 10 - 12 ply on 2 pce 5 bolt rim 503.00

Please select the destination of the cutter for proper Decals, Manuals, and Shielding

1) C308‐NA North American/ Australia Destination Kits 457.00

MASTER PRICE SHEETS




~ ~ Selection 4 ~ Choose a Wing Axle Kit ~ ~


~ ~ Selection 6 ~ Choose a Destination Package ~ ~


Price USA Wt/lbs

1) C306‐300 Manual Winch Kit 766.00 115

2) C306‐805 Three Spool Valve Kit (For tractors with limited remote outlets) 1,441.00 77

3) C306‐815 Double Acting Cylinder Kit "TEE" Connection 271.00 4

4) C301‐830 Hydraulic Hose Ends Kit (Pioneer Ends) 71.00 3

5) C306‐835 Independent Double Acting Cylinder Kit 156.00 12

6) C306‐840 Extra Long Hoses for Spool Valve Kit 501.00 48

7) C306‐880 Right Wing Gauge Wheel Kit 645.00 100

8) C306‐885 Left Wing Gauge Wheel Kit 645.00 100

9) C306‐315 Tool Box Kit 679.00 33

10) C306‐305 Flex Arm Mount 172.00 0

11) C308‐890 Tire Bumper Kit 768.00

12) C306‐530 Front Belting Kit 405.00


OPTIONAL PDI INCLUDES: greasing of all pivot points, gearbox oil checked, charge hydraulic cylindersand install pioneer ends. Tires will be installed where necessary. It is the dealers responsibility to remove shipping

brackets & banding as well as to adjust mower height as specified in the operators manual. Please go to the

Schulte website/dealer access for further information.

HYDRAULIC REQUIREMENTS FOR XH1500A three circuit system provides independent lifting of each

wing and height adjustment control, with float on two circuits.

This system is preferred for optimum performance.

If a three circuit system is nthree spool valve kit is required ‐ part #C306‐805.


MASTER PRICE SHEETS





- Chemical application spray kit for XH1500 - 50 US Gallon (189 Litres) Capacity Tank- Adjustable Flow rate (can be matched to the product you are using) - Great for brush and weed control- Monitor for speed, pressure and application rates - Reduce drift while mowing-

Spraying is done unbder the deck

`

Price USA Wt/lbs

1) C308‐675 Eliminator Spray Kit 7,974.00

2) C308‐680 Extension Harness, needed if you are using with a flex arm 115.00

Factory Installation on XH1500 Net 675.00


MASTER PRICE SHEETS


ELIMINATOR FEATURES

Eliminator

~ ~ Selection 1 ~ Choose a Basic Unit ~ ~


- 7GA deck - Single domed, sweep clean deck - S000-010 safety chain kit 1/4" grade 70- Two piece replaceable skid shoes - Rubber suspension - standard with 10,000 lbs capacity- Double safety chains front & rear - Four gearbox drive layout - 1/4" Round skid pans (Stump Jumpers)- Walking axles on center section 210hp down, 260hp splitter - Pentagon blade bolt design- Hydraulic phasing lift system - Full floating front hitch - Operator's manual in holder- Hydraulic wing lift system - Inboard rotation- 517 Hubs and axles - Deck protection rings

Price USA Wt/lbs

1) C309‐100 Basic 10' Unit 19,537.00 4656



a) C309‐700 CW Rotation on Center, 540 RPM, (Std. Rotation) 3,946.00

b) C309‐710 CW Rotation on Center, 1000 RPM (Std. Rotation) 3,941.00

1) C308‐180 Trailing Hitch CV Style 740.00 138

Choose a Clevis:

a) C000‐506WG Open Clevis (Minimum Requirement) 330.00 12

b) C000‐560WG Adjustable Clevis 492.00 15

c) C000‐500WG Precision Hitch (Not Required with FLX1510) 595.00 29

d) C000‐513WG Solid Tongue (Not Required with FLX1510) 330.00 13e) C000‐515WG Clevis with 2 3/16" Opening 353.00 13f) C000‐510WG Pro Level Hitch 492.00


a) 340‐870WG CV Shaft, 540 RPM 1,223.00 77

b) 340‐648WG CV Shaft, 1000 RPM 1,002.00 60

2) C306‐196 Trailing Equal Angle Hitch c/w 540 Tractor Shaft 2,504.00 260(Not Available with FLX1510)


MASTER PRICE SHEET


CUTTER FEATURES


~ ~ Selection 1 ~ Choose a Basic Unit and Drive Package~ ~



Price USA Wt/lbs

1) C309‐450 2 Blade Pan kit ‐ CW Schulte Super Suction Updraft 4" Blades 1,323.00 264

2) C309‐455 2 Blade Pan kit ‐ CW Schulte Super Suction Updraft 5" Blades 1,373.00

1) C309‐870 Single Axle Kit for Right Wing 777.00 81

2) C309‐875 Wing Walking Axle Kit for Right Wing 1,332.00 158


PRICE PER TIRE

1) 210‐003WG Solid Laminated Tire, 6 x 9 x 20 214.00 70

2) 210‐540WG Tire 24x8‐14 20 Ply Severe Duty 371.00 70

3) 210‐540FWG Tire 24x8‐14 20 Ply Severe Duty Foam Filled 551.00

4) 210‐175WG Forklift Tire 6.5x10 ‐ 12 Ply Rated 294.00 18

5) 210‐175FWG Foam Filled Forklift Tire 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim 503.00

C309‐NA North American/ Australia Destination Kits 448.00

1) C306‐300 Manual Winch 766.00 125

2) C307‐805 Three Spool Valve Kit 1,176.00 0

3) C306‐880 Right Wing Guage Wheel Kit 645.00 32

4) C306‐315 Tool Box Kit 679.00 30

5) C306‐305 Flex Arm Kit 172.00 72

6) C307‐530 Front Belting 309.00 0

7) C302‐830 Pioneer Ends 60.00 30

MASTER PRICE SHEET




~ ~ Selection 4 ~ Choose a WIng Axle Kit ~ ~







OPTIONAL PDI INCLUDES: greasing of all pivot points, gearbox oil checked, charge hydraulic cylinders

and install pioneer ends. Tires will be installed where necessary. It is the dealers responsibility to remove shipping

brackets & banding as well as to adjust mower height as specified in the operators manual. Please go to the

Schulte website/dealer access for further information.


MASTER PRICE SHEETS



MASTER PRICE SHEET

MACHINE PRICES AND SPECIFICATIONS Effective January 1, 2019

Price USA WT(lbs)C185‐100 Schulte FX‐1800, Basic Unit 10,379.00 5,113S000‐085 Safety Light Kit (Required) 412.00


a) C306‐705 Drive Package, CW Center, 540 RPM 5,517.00 in baseb) C306‐715 Drive Package, CW Center, 1000 RPM 5,484.00 in base

C185‐180 Trailing Hitch, CV Style 740.00 13Choose a CV Shaft:

a) 340‐870WG CV Shaft, 540 RPM 1,223.00 74b) 340‐648WG CV Shaft, 1000 RPM 1,002.00 60c) 340‐658WG CV Shaft 1000 RPM 1 3/4" shaft 1,328.00 60

C185‐196 Equal Angle Hitch Kit w/ 540 RPM Shaft 2,277.00 250

C000‐506WG Open Clevis (Minimum Requirments) 330.00 11C000‐560WG Adjustable Clevis (not required with FLX10 or FLX15) 492.00 15C000‐500WG Precision hitch 595.00 28C000‐513WG Solid Tongue 330.00 13C000‐510WG Pro Level Hitch 492.00

C180‐115 Duals Wheel Standard on Center OR 1,235.00 237C180‐125 Walking Tandems on center (6 Tires minimum) 2,232.00 300C180‐870 Single Axle Kit for Left and Right Wings (required) 911.00 162NOTE: (accomodates 1 or 2 tires)

Subject to GST

CUTTER FEATURES‐ 540/1000 RPM Drive ‐ 80 Degree CV Drive‐ 7 ga. Spun Formed Stump Jumpers ‐ Height Control Cylinder & Hoses‐Replaceable Skid Shoes ‐Wing Lift Cylinders & Hoses‐ 7 ga Single Domed Deck ‐ S000‐010 Safety Chain (1/4" gr.70 ‐ 10000lbs cap.)‐ Deck Protection Rings ‐ Operator's and Parts Manual Holder

‐ Over Center Folding Wings ‐ Cutting Width 180" (4.57m)‐ Transport Width (max with duals on wings) 102"(2.59m

more specs on brochure


~ ~ Selection 2 ~ Choose a Hitch Option ~ ~

~ ~ Selection 3 ~ Choose a Clevis ~ ~

FX‐1800 Pan ROTARY CUTTER

~ ~ Selection 4 ~ Choose Center and The WIng Axle Kit ~ ~

MASTER PRICE SHEET


C180‐520 Chain Guards Single Front and Rear 669.00 206C180‐500 Chain Guards Double Front and Rear 904.00 308

C316‐450 Pan Kit (required) 1,376.00 270

C316‐451 CW Schulte Super Suction Updraft 4" Blades 332.00 77C316‐459 CW Schulte Super Suction Updraft 5" Blades 475.00 80C316‐453 Shredder Blades, CW Center 559.00 143







~ ~ Selection 5 ~ Choose a Safety Guard ~ ~






MASTER PRICE SHEET


C185‐304 Strut Mount for Flex Arm,(Factory Installed) 631.00 25C185‐305 Strut Mount for Flex Arm, (parts only) 181.00 25C185‐325 Tension Link Leveling Rod , Factory Installed 226.00 41C185‐330 Tension Link Leveling Rod , Weld on Parts only 229.00 41C185‐310 Hose Kit, independent wing‐lift 179.00 10

Assembly Charge on Pan Units Net 300.00

IMPORTANT:


2)





MASTER PRICE SHEET

MACHINE PRICES AND SPECIFICATIONS Effective January 1, 2019

Price USA WT(lbs)C185‐001 Schulte FX‐1800, Basic Unit 10,302.00 5,113S000‐085 Safety Light Kit (Required) 412.00





a) 340‐870WG CV Shaft, 540 RPM 1,223.00 74b) 340‐648WG CV Shaft, 1000 RPM 1,002.00 60c) 340‐658WG CV Shaft 1000 RPM 1 3/4" shaft 1,328.00 60

C185‐196 Equal Angle Hitch Kit w/ 540 RPM Shaft 2,277.00 250


C180‐115 Duals Wheel Standard on Center OR 1,235.00 237C180‐125 Walking Tandems on center (6 Tires minimum) 2,232.00 300C180‐870 Single Axle Kit for Left and Right Wings (required) 911.00 162NOTE: (accomodates 1 or 2 tires)

Subject to GST

CUTTER FEATURES‐ 540/1000 RPM Drive ‐ 80 Degree CV Drive‐ 7 ga. Spun Formed Stump Jumpers ‐ Height Control Cylinder & Hoses‐Replaceable Skid Shoes ‐Wing Lift Cylinders & Hoses‐ 7 ga Single Domed Deck ‐ S000‐010 Safety Chain (1/4" gr.70 ‐ 10000lbs cap.)‐ Deck Protection Rings ‐ Operator's and Parts Manual Holder

‐ Over Center Folding Wings ‐ Cutting Width 180" (4.57m)‐ Transport Width (max with duals on wings) 102"(2.59m






~ ~ Selection 4 ~ Choose Center and The WIng Axle Kit ~ ~

MASTER PRICE SHEET



C185‐220 Fixed Knife and Shroud Kit Required 3,166.00 270

C180‐520 Single Chain Guards Single Front and Rear Required 669.00 206C185‐460 Single Chain add on for Fixed Kife Required 158.00 308







~ ~ Selection 6 ~ Choose a Blade Kit ~ ~



~ ~ Selection 9~ Choose a Destination Code ~ ~

MASTER PRICE SHEET


C185‐325 Tension Link Leveling Rod , Factory Installed 226.00 41C185‐310 Hose Kit, independent wing‐lift 179.00 10


IMPORTANT:


2)





MASTER PRICE SHEET


Price USA WT(lbs)

C195‐100 10,021.00 4,863

S000‐085 Safety Light Kit (Required) 412.00

DRIVE PACKAGE (choose one)

C307‐700 4,057.00 in base

C307‐710 4,027.00 in base


a) 340‐870WG CV Shaft, 540 RPM 1,223.00 75

b) 340‐648WG CV Shaft, 1000 RPM 1,002.00 220

C185‐196 2,277.00 250

C000‐506WG Open Clevis (Minimum Requirments) 330.00 11

C000‐560WG Adjustable Clevis 492.00 15

C000‐500WG Precision hitch 595.00 28

C000‐513WG Solid Tongue 330.00 13

C000‐510WG Pro Level Hitch 492.00

C180‐115 1,235.00 82

C180‐125 2,232.00 237

C190‐870 455.00 300

Equal Angle Hitch Kit w/ 540 RPM Shaft

CUTTER FEATURES

FX1200, Basic Unit

CW Rotation on Center, 540 RPM

CW Rotation on Center, 1000 RPM

Duals On Center or

Walking Axles on Center

Wing Wheel Standard, 1or2 Tires Required






~ ~ Selection 4 ~ Choose a WIng Axle Kit ~ ~

‐ 540/1000 RPM Drive ‐ 80 Degree CV Drive‐ 7 ga. Spun Formed Stump Jumpers ‐ Height Control Cylinder & Hoses‐Replaceable Skid Shoes ‐Wing Lift Cylinders & Hoses‐ 7 ga Single Domed Deck ‐ S000‐010 Safety Chain (1/4" gr.70 ‐ 10000lbs cap.)‐ Deck Protection Rings ‐ Operator's and Parts Manual Holder

‐ Over Center Folding Wings ‐ Cutting Width 126" (3.20m)‐ Transport Width (max with duals on wings)97.5"(2.47m)


MASTER PRICE SHEET


Price USA WT(lbs)

C190‐520 Chain Guards Single Front & Rear 466.00 137

C190‐500 Chain Guards Double Front & Rear 614.00 205

C317‐450 Pan Kit (required) 943.00 190

C317‐451 Updraft Blades, CW Center 219.00 70

C317‐453 344.00 115

C190‐483 425.00 51

C190‐485 711.00 84

C180‐486 881.00 99


210‐003WG 214.00 70

210‐175WG 294.00 74

210‐175FWG Foam Filled Forklift Tire 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim 503.00

210‐540WG 371.00 70

210‐540FWG Tire 24x8‐14 20 Ply Severe Duty Foam Filled 551.00

C195‐NA 31.00

Solid Laminated Tires, 6 x 9 x 20

Tire Assy, Forklift, 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim

Tire 24x8‐14 20 Ply Severe Duty

North American & Australian Decal Kit

Shredder Blades, CW Center

Axle Kit for 3 Tires





~ ~ Selection 6 ~ Choose The Pan Kit ~ ~





MASTER PRICE SHEET


C185‐304 631.00 25

C185‐305 181.00 25

C185‐325 226.00 41

C185‐330 229.00 41


IMPORTANT:

2) OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte

recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be

used for agricultural purposes only and are specifically not recommended for highway, right‐of‐way, parks or greenbelt

mowing. Before ordering a mower, read the Thrown Object Shield Message in the Rotary Cutter Spec section in sales price

book.

Strut Mount for Flex Arm,(Factory Installed)

Strut Mount for Flex Arm, (parts only)

Tension Link Leveling Rod , Factory Installed

Tension Link Leveling Rod , Weld on Parts only


~ ~ Selection 11 ~ Choose a Extra Options ~ ~



- 540 RPM Drive line - 80 degree CV joint to tractor - Spring steel bushings- Round skid pans - 12.5L x 15 tires, center section - Rear counterbalance springs- Replaceable skid shoes - Aircraft tires on wings - S000-010 safety chain kit 1/4" grade 70- 10 GA Deck - Height control cylinder with hoses with 10,000 lbs capacity- Heavy duty slip clutches - Wing lift cylinder with hoses - Operator's manual in holder- Deck protection rings - Laminated rubber shielding - Rear Mounted Center Rotor

Price USA Wt/lbs

1) CS01‐000 Basic 12' Unit, 540 RPM 33,341.00 3,858

1) CS01‐106WG Open Clevis 138.00 11

1) S000‐045 Safety Light Kit 465.00 31

Assembly Charge 300.00

IMPORTANT: Safety Chain Kit must be used at all times when moving equipment on any type of road.

or tail lights, the cutter must be equipped with the S000‐045 Safety Light Kit

IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors,or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards

for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not

recommended for highway, right‐of‐way, parks or greenbelt mowing. Before ordering a mower, read the Thrown

ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.

MASTER PRICE SHEETS


CUTTER FEATURES


~ ~ Selection 2 ~ Choose a Hitch Type ~ ~

~ ~ Selection 3 ~ Extra Option ~ ~

V1280 Rotary CutterV1280 Rotary Cutter


- Rigid single domed 7 gauge deck construction - Pull type and 3 point hitch options- Overall width: 95.5" ( 2.43 m) - Base unit common to all configurations- Cutting Height: 3" - 12 7/8" (7.6 cm - 33 cm) - 540 RPM drive- Cutting Width: 84" (2.13 m) - Double Chain Front & Rear- Cutting Capacity: 3" (7.6 cm) - 7 Ga Deck- Minimum Tractor HP 50 HP ( 37.3 kW)- Cat. II & III 3 Point / Trailing Pull clevis, solid tongue & adjustable clevis

Price USA Wt/lbsC107‐100 FX-107 Base Unit 4,768.00

C107‐300 3PT Mount Option (if this choosen skip Trailing Hitch Option) 2,797.00

C107‐195 Trailing Hitch or 4,118.00

CS01‐106WG 138.00

C000‐360WG 299.00

C000‐300WG 442.00

C502‐113WG 124.00

C107‐250 752.00

210‐003WG 214.00

210‐540WG 371.00

210‐540FWG 551.00

210‐175WG 294.00

210‐175FWG Foam Filled Forklift Tire 6.5 x 10 ‐ 12 ply on 2 pce 5 bolt rim 503.00

Net 200.00Assembly

BLADE PAN OPTION (Must Pick)

MASTER PRICE SHEET


CUTTER FEATURES - ALL HITCH TYPES

- Pull type unit has the ability to accept open

Open Clevis (Minimum Requirement) or

Adjustable Clevis or

Precision Hitch or

Solid Tongue

(CHOOSE 2 TIRES PER UNIT)

Solid Laminated Tires, 6 x 9 x 20Tire 24x8‐14 20 Ply Severe DutyTire 24x8‐14 20 Ply Severe Duty Foam FilledForklift New, 6.5 x 10 ‐ 12 ply rated on 2 pcs 5 bolt rim

~ ~ Selection 2 ~ Choose a 3 Point Option Configuration ~ ~

~ ~ Selection 3 ~ Choose a Trailing Hitch Configuration ~ ~

FX‐107 Rotary Cutter

~ ~ Selection 1 ~ Choose a Base Unit ~ ~

~ ~ Selection 5 ~ Choose Tire Options ~ ~

~ ~ Selection 4 ~ Blade Pan Option ~ ~


December 2016




















Schulte

[email protected]

Lakeville, MN 55044952-469-5267

No Charge

No Charge

888-443-3639952-469-5269

32%

Schulte 2019 5026 Rotary Cutter 1.16.19.pdf


$2.00

Englefeld

6 Months


5026 (26') Rotary Cutter






- 10GA deck - Spring steel bushings at major - S000-010 safety chain kit 1/4" grade 70- Phasing cylinders (3) c/w hoses pivot points with 10,000 lbs capacity- Wing lift cylinders (2) c/w hoses - 1000 RPM - Two piece replaceable skid shoes- Suspension for center and wings - Deck protection rings - Operator's manual in holder

Price USA

Price USA Wt/lbs

1) C502‐100 Basic 26' Unit, 1000 RPM 43,884.00 6,1312) S000‐040 Safety Light Kit (Required) 505.00

1) C502‐810 Trailing hitch, CV Style 979.00 185Choose a Clevis:

a) C502‐113WG Solid Tongue 124.00 13b) C502‐107WG Open Clevis 111.00 12c) C000‐300WG Precision hitch 442.00 29d) C502‐816WG Solid Tongue with 2‐3/16" hole for 2" pin 134.00

e) C502‐815WG Clevis with 2 3/16" Opening 142.00 13f) C000‐360WG Adjustable Clevis 299.00


a) 340‐8082WG CV Shaft, 1 3/4" x 20 Spline 1,720.00 80b) 340‐8092WG CV Shaft, 1 3/8" x 21 Spline 1,711.00 80

2) C502‐820 Trailing Equal Angle Hitch Sub Assembly 1,810.00 270Must Choose a Hitch Block

a) C502‐821 273.00

b) C502‐822 278.00

c) C502‐828 276.00

Choose a Tractor Shaft: IMPORTANT : PTO Adaptor must not be used in any application.

a) 340‐5505WG Equal Angle Shaft, 1 3/8" x 21 Spline 943.00 73b) 340‐5506WG Equal Angle Shaft, 1 3/4" x 20 Spline 728.00 73

MASTER PRICE SHEET

CUTTER FEATURES

Category 3, fits up to a 1‐1/2” pin and a drawbar 2‐1/4” x 3‐1/2”

Category 4, fits up to a 2” pin and a drawbar 2‐1/2” x 5‐1/8”




5026 Rotary Cutter


Price USA Wt/lbs

C502‐250 Two Blade Pan Kit 3,926.00 597

C502‐251 Two Blade Pan Kit with Shredder Blades 4,293.00 747

C502‐270 Fixed Knife Shredder Kit with Updraft Blades 6,118.00 592

C502‐280 Fixed Knife Shredder Kit with Flat Blades 6,170.00 592(recommended for cotton)

Assembly charge on pan units Net 550.00

Assembly charge on fixed blade units Net 650.00

C502‐420 Single Safety Chains Front & Rear c/w Front Rubber Belting 1,920.00 359(recommended for cotton & corn)

C502‐430 Single Safety Chains Front Only c/w Front & Rear Rubber Belting 1,717.00 258(recommended for dry grass staw, wheat straw & barley straw)

C502‐500 Single Safety Chains Front & Rear 1,707.00 340

C502‐440 Single Safety Chains Front & Rear c/w frt & rear belting 2,642.00

C502‐550 Double Safety Chains Front & Rear 2,218.00 677

IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors,or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards forall mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically notrecommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.

MASTER PRICE SHEET



~ ~ Selection 4 ~ Choose a Safety Guard & Accessories ~ ~

5026 Rotary Cutter


Price USA Wt/lbsC502‐622 Standard Axle Kit (Choose 6 tires cannot use stubble proof tires) 2,976.00

C502‐624 Standard Axle Kit (choose 8 tires cannot use stubble proof tires) 3,903.00

C502‐626 Walking Axle Kit (choose 8 tires cannot use stubble proof tires) 3,968.00

C502‐628 618 Walking Axle Kit (Choose 8 tires Stubble proof only) 5,197.00

210‐182NRWG Used Aircraft Tire (Choose quantity of tires needed 6 or 8) 321.00

210‐182NRF Aircraft Foam Filled Tire non‐recap (Choose quanity of tires needed 6 or 8) 641.00

210‐530WG Tire Assembly 11L Stubble Proof (Choose 8 Tires) 374.00

210‐505WG Light Truck Tire (Choose quantity of tires needed 6 or 8) 269.00

C502‐780 6,874.00

C502‐790 6,700.00

C502‐NA North America and Australia Destination Kit 65.00

C502‐___ Foreign Destination Kit (Amount may vary depending on country) 475.00(Estimate)

MASTER PRICE SHEET

Cyclone Fan Debris Kit, Factory Installed

Cyclone Fan Debris Kit, Crated

~ ~ Selection 5 ~ Choose Axle Option ~ ~

5026 Rotary Cutter


~ ~ Selection 7 ~ Schulte Fan Kit ~ ~

~ ~ Selection 6 ~ Choose Tire Option ~ ~


C502‐920 Crop dividers 244.00

C502‐740 HYD Cooler Factory Installed 4,760.00

C502‐745 HYD Cooler Factory Crated 4,596.00

MASTER PRICE SHEET


5026 Rotary Cutter


December 2016



















No Charge

No Charge

888-443-3639952-469-5269

32%

Schulte 2019 FLX1510 Flex Arm Rotary Cutters 1.16.19.pdf


$0.85

Englefeld

6 Months


FLX1510 Flex Arm


Schulte

[email protected]

Lakeville, MN 55044952-469-5267






- New heavy duty 11l x 15, 2 ply tires, load cap. Of 4000 lbs - Opt. 6 port selector valve kit for independent- Cut dirctly in-line with the tractor or at any offset distance upto 122" wing action or limited tractor hydraulic outlets- 6000 lb capacity, 6 bolt hubs - Continuous power rating 200hp @ 1000rpm- Spring steel bushings, induction harden pins at major pivot points - Bolt in replacement axles- Minimum of 3 hydraulic circuits required to operate with 15' or 10' mowe- Safety light kit- Heavy duty 3-1/2 x 36 welded hydraulic cylinder - Operator's manual in holder

Price USA Wt/lbs1) A105-000 FLX 1510 Flexarm 24,100.00 1,850

1) A105-350 1,407.00 25

2) A105-360 226.00

When choosing this opt. you will require a C306-835(Independent Double Acting Cylinder Kit)

* C306-835 Independent Double Acting Cylinder Kit 156.00

Assembly Net 300.00


MASTER PRICE SHEETS


FLEX ARM FEATURES

Six Port Selector Valve Kit for Independent Wing Actions with Limited Tractor Hydraulics (Fits FLX-1510)

Hose kit for independent wing lift- Tractors with 4 valve banks

FLX‐1510 FLEX ARM




December 2016



















No Charge

No Charge

888-443-3639952-469-5269

25%

Schulte 2019 FM350-FM115 Front Mount 3PH Frame1.16.19-3.pdf


$1.00

Englefeld

6 Months


FM350/FM115 Front Mount 3pt Hitch Frame


Schulte

[email protected]

Lakeville, MN 55044952-469-5267




COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAMEEdney Distributing Co., Inc. 0000215024/003 8485 215th St W/Lakeville MN/55044 952-469-5267 Mike PetersAdkins Equipment, Inc. 0000208093/001 18323 Cty Hwy 21/Detroit Lakes MN/56501 218-847-4587 Jeff AdkinsBobcat of Bemidji 0000251301/001 3516 Irvine Ave N/Bemidji MN/56601 218-751-4660 Dave NeilsenBobcat of Duluth 0000236269/002 4610 W Arrowhead Rd/Duluth MN/55811 218-727-7377 Dan LindeButler Machinery 0000204147/001 3401 33rd St S/Fargo ND/58104 701-298-1749 Troy DeWiteJaycox Implement 0000194422/001 410 West Roehn/Luverne MN/56156 507-283-2319 Mark OmmenKesteloot Enterprises 0000295830/001 2517 Co. Rd 8/Marshall MN/56258 507-532-0100 Daren KestelootKibble Equipment 0000364257/001 1150 South Victory Dr/Mankato MN/56001 507-387-8201 Ken WagnerLano Equipment 0000213525/001 1015 Hwy 212 W/Norwood MN/55368 952-467-2181 Jack LanoLano Equipment 0000193199/003 6140 Hwy 10/Anoka MN/55303 763-307-2811 Scott FaheyMelrose Implement 0000802356/001 Hwy 13 South/Melrose MN/56352 320-256-4253 Dave WenkerMid-Central Equipment 0000232112/001 50106 US Hwy 210 W/Henning MN/56551 218-583-4124 Dick TranaMiller-Sellner Implement, Inc. 0000198622/001 22024 State Hwy 4/Sleepy Eye MN/56085 507-794-2131 Doug MillerMinnesota Equipment 0000197372/001 13725 Main St/Rogers MN/55374 763-428-4107 Dan ScharberNelson Equipment 0000210256/001 17270 US 59/Thief River Falls MN/56701 218-681-1997 Joel NelsonNiebur Tractor & Equipment, Inc. 0000268650/001 14380 240th St E /Hastings MN/55033 651-437-3531 Dan BeisselNorthland Farm Systems 0000208304/001 3695 Hoffman Dr N/Owatonna MN/55060 507-451-3131 John LoseeOlson Power and Equipment 0000197590/001 38560 14th Ave/North Branch MN/55056 651-674-4494 Dan OlsonRDO Equipment 0000199158/011 1254 S. Tower Rd/Fergus Falls MN/56537 701-526-6665 Jason HintermeisterRDO Equipment 0000199158/013 110 Michael St/Hawley MN/56549 701-526-6665 Jason HintermeisterRDO Equipment 0000199158/010 2900 Main Ave SE/Moorhead MN/56560 701-526-6665 Jason HintermeisterSEMA Equipment, Inc. 0000197244/001 11906 Hwy 14 E MN/55972 507-259-2240 Doug EricksonPlainview Equipment 0000197244/002 RR1 Box 221A MN/55964-9775 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/003 1013 S Section Ave MN/55975-0106 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/004 55083 County RD 4 MN/55964 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/005 2001 4th St NW MN/55912 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/006 11555 Hwy 60 Blvd MN/55983 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/007 610 W Main St MN/55951 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/008 32980 Northfield Blvd MN/55075 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/009 201 N Hwy 44/76 MN/55921 507-259-2240 Doug EricksonSmiths Mill Implement,Inc. 0000197059/001 63065 206th St/Janesville MN/56048 507-234-5191 Rick EichhorstTitan Machinery 0000251892/015 6340 Hwy 101/Shakopee MN/55379 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/004 315 Hwy 28 E/Graceville MN/56240 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/010 500 Ingersoll Ave/Crookston MN/56716 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/023 2491 St Hwy 200/Ada MN/56510 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/011 17108 US Hwy 59 NE/Thief River Falls MN/56701 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/012 207 South Borud St/Winger MN/56592 952-445-5400 Brenden HonebrinkTjosvold Equipment 0000202238/001 5352 285th Ave/Granite Falls MN/56241 320-564-2331 Jon TjosvoldTruman Welters Tractor and Equip. 0000193702/001 1600 Hwy 55 E/Buffalo MN/55313 763-682-2200 Seth StrehlerWabasha Implement 0000212699/001 840 N Wabasha/Plainview MN/55964 507-534-2004 Jack Decker

MASTER PRICE SHEET

USA Effective January 1, 2019

FM-350 Specs:Tractor HP: 85 HP-250 HP Tractor PTO - 1000 rpm for RDX / SDX-117 and RDX / SDX-102

Adjustment: Accommodates tractors between 151" and 540 rpm for RDX / SDX-102 only211" measured from mount plate to drawbar pin Lift Capacity : 5000 lbs

Nominal Ground Clearance - 13" depending on tractor installationNominal Lift Range - 18"Weight - 1650 lbs

Retail Price Weight (lbs)F350-100 FM-350 Front Mount Frame (NO Driveline Package) 6,085.00 750

Used for SV 3pt V-BLADE (must choose for all attactments)

Includes 2 hydraulic banks for operationF350-200 Driveline package (Used for Snow Blowers) 4,004.00

F250-310 1:1 Rear Gear Box 2,256.00 100Select when connecting a 1000 RPM PTO tractor to a SDX-117 or RDX-117

or when connecting a 540 RPM PTO tractor to a SDX-102 or RDX-102 snow blower

F250-300 1000 to 540 RPM Rear Reduction Gearbox 2,143.00 100Select when connecting a 1000 RPM PTO tractor to a RDX-117 or RDX-102

NOTE: Power delivered from a 1,000 RPM tractor only340-662WG 1-3/8 Z21 for SDX-102 / RDX-102 619.00 36340-663WG 1-3/4 Z20 for SDX-102 / RDX-102 613.00 36340-925WG 1-3/8 Z21 (size 9) for SDX-117 / RDX-117 757.00 52340-926WG 1-3/4 Z20 (size 9) for SDX-117 / RDX-117 763.00 52NOTE: Power delivered from a 540 RPM tractor only340-924WG 1-3/8 Z6 (size 9) for RDX-102 755.00 50

MACHINE PRICES and SPECIFICATIONS

FM‐350 Front Mount 3pt Hitch Frame


~ ~ Selection 2 ~ Choose Gear Box ~ ~

~ ~ Selection 3 ~ Choose REAR TRACTOR SHAFT ~ ~

www.schulte.ca

MASTER PRICE SHEET


RETAIL PRICE WEIGHT (LBS)

F300-410 Hydraulic Bank and Mount, Single 348.00 50Required for drum rotation on RDX-102 / RDX-117

Tractor Mount

*Please contact us for tractor mount options & availability 600.00



~ ~ Selection 4 ~ Choose Hydraulic Bank~ ~

~ ~ Selection 5 ~ Choose Options ~ ~

www.schulte.ca

MASTER PRICE SHEET

This list supersedes all previous lists.


FM-115 Specs:Tractor HP: Max. 115 hp (86kw) Tractor HP: Min. 55hp(41kw) for SDX‐840, 85hp (63kw)for SDX‐102, RDX‐102

Tractor Hydraulic Requirement ‐ 3 remote circuits with a minimum total hydraulic output of 10 GPM at 1200 PSI.rotating drum.

An additional circuit is required if the snow blower has a rotating drum (RDX‐102).

Tractor PTO ‐ 540 RPM Lift Capacity: Maximum ‐ 5000 lbs (1162 KG)

Adjustability ‐ Fits tractors between 111‐1/2" and 164‐1/2" measured the front mount plate to the drawbar pin

Normal Lift Range ‐ 18" Nominal Ground Clearance ‐ 10" depending on tractor installation

Approximate Weight - 1400 lbs (636 KG)

Retail Price Weight (lbs)F115-100 FM-115 Front Mount Frame (NO Driveline Package) 4,380.00 750

F115-200 Driveline package (Used for Snow Blowers) 3,885.00

F115-410 Hydraulic Bank and Mount, Single 322.00 100

340-924WG 1-3/8 Z6 (Size 9) for RDX-102 755.00

Assembly Available




www.schulte.ca


December 2016



















No Charge

No Charge

888-443-3639952-469-5269

32%

Schulte 2019 FX520 Rotary Cutters 1.16.19


$1.20

Englefeld

6 Months


FX520 (20') Rotary Cutter


Schulte

[email protected]

Lakeville, MN 55044952-469-5267






- Overall Width --- 247" (6.2m) - Transport Width --- 91" (2.32m) - Min. Tractor Size --- 100hp (75kw)- Overall Length --- 242" (6.15m) - Transport Height --- 120" (3.05m) - Blade Tip Speed --- 16,000 ft/min- Cutting Height --- 2" - 17.5" - Cutting Capacity --- 2" (51mm) - Blade Overlap --- 6" (153mm)

(Depending on Tire Size) 2" (51mm) Fixed Knife - Deck Thickness --- 180" (7 ga) (4.6mm)- Cutting Width --- 240" (6.10m) 4" (102 mm) Pan Unit

Price USA Wt/lbs

1) C520‐100 Basic 20' Unit, 1000 RPM 35,214.00 5,2212) S000‐080 Safety Light Kit (Required) 441.00

2) C520‐800 Trailing hitch, CV Style 989.00 179Choose a Clevis:

a) C000‐513WG Solid Tongue 330.00 13b) C000‐507WG Open Clevis 330.00 12c) C000‐500WG Precision hitch 595.00 29d) C000‐560WG Adjustable Hitch 492.00

e) C000‐516WG Solid Tongue with 2‐3/16" hole for 2" pin 330.00

f) C000‐515WG Clevis with 2 3/16" Opening 353.00 13g) C000‐510WG Pro Level Hitch 492.00


a) 340‐8082WG CV Shaft, 1 3/4 x 20 Spline 1,720.00 79b) 340‐8092WG CV Shaft, 1 3/8" x 21 Spline 1,711.00 79

3) C520‐180 Parallel Ring hitch (For European Applications Only) 1,393.00 217a) 340‐5515WG Shaft, 1 3/8" x 6 with Over‐Running Clutch 1,514.00 79

4) C520‐175 High hitch (For Germany Only) 1,575.00 262Choose a Tractor Shaft:

a) 340‐8092WG CV Shaft, 1 3/8" x 21 Spline 1,711.00 79b) 340‐8082WG CV Shaft, 1 3/4" x 20 Spline 1,720.00 79

Assembly charge on pan units Net 550.00

Assembly charge on fixed blade units Net 650.00

MASTER PRICE SHEET

SPECIFICATIONS





Price USA Wt/lbs

1) C520‐250 Pan Kit with Updraft Blades and Shrouds 2,939.00 624

2) C520‐260 Pan Kit with Shredder Blades and Shrouds 3,324.00 761

3) C520‐265 Fixed Knife Shredder Kit with Updraft Blades & Shrouds 4,745.00 965

4) C520‐295 Fixed Knife Kit with Flat Blades & Shrouds (For Cotton) 4,625.00 981

1) C520‐500 Single chains front and rear 1,187.00 340a) C520‐580 Half Length Front Belting (Must be used with a chain option) 262.00 31

2) C520‐550 Double chains front and rear 1,498.00 677a) C520‐580 Half Length Front Belting (Must be used with a chain option) 262.00 31

1) C520‐612 Standard 618 Axle kit (Choose 4 Tires) 3,692.00

2) C520‐614 517 Axle Kit c/w Center duals (choose 6 Tires) 3,912.00

3) C520‐616 517 Axle Kit c/w Center Walking (choose 6 Tires) 4,315.00

4) C520‐618 517 Dual Axle Kit (Choose 8 Tires) 4,486.00

5) C520‐622 517 Walking Axle kit (Choose 8 Tires) 5,294.00

6) C520‐624 517 Center Walking Axle c/w Duals on Wings (Choose 8 TireS) 4,888.00

7) 210‐530WG Tire Assembly 11L Stubble Proof (Choose quanity of tires needed 6 or 8) 374.00

8) 210‐182NRWG Used Aircraft Tire (Choose quanity of tires needed 6 or 8) 321.00

9) 210‐505WG Light Truck Tire (Choose quanity of tires needed 6 or 8) 269.00

MASTER PRICE SHEET


~ ~ Selection 4 ~ Choose a Safety Guard and Accessories ~ ~


~ ~ Selection 5 ~ Choose Axle Option ~ ~

~ ~ Selection 6 ~ Choose Tire Option ~ ~


Price USA Wt/lbs

1) C520‐NA North America and Australia Destination Kit 61.00

2) C520‐___ Foreign Destination Kit (Amount may vary depending on country) 475.00(Estimate)

1) Fan Debris Kit, Factory Installed 7,084.00

2) C520‐790 Fan Debris Kit, Crated 6,899.00

2) C520‐920 Crop Dividers 254.00 35

IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors,or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards

for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not

recommended for highway, right‐of‐way, parks or greenbelt mowing. Before ordering a mower, read the Thrown

C520‐780


MASTER PRICE SHEET




~ ~ Selection 8 ~ Schulte Fan Kit ~ ~


December 2016




















Schulte

[email protected]

Lakeville, MN 55044952-469-5267

No Charge

No Charge

888-443-3639952-469-5269

32%

Schulte 2019 FX742 FX530 Rotary Cutters USA1.16.19.pdf


$4.00

Englefeld

6 Months

Saskatchewon, S0k 1N0

FX742 FX530 Rotary Cutters






- 42ft Cutting Width (12.8 m) - 250hp Minimum Tractor Size - Hydraulic Phasing & Mechanical Hybrid- 2" - 16" Cutting Height (51-406 mm) - Floating Hitch Lift System with Hydraulic Depth Control- 118" Transport Width (3m) - 10 Gearbox Layout with - Adjustable Wheel Standards- 10 ga Domed Deck (3.4 mm) - 7 Slip Clutches (7 down clutches) - 1 Year Full Warranty & 3 Years- Replaceable 2 Piece Skid Shoes - 18,000 lbs Total Weight (8,165 kgs) Limited Gearbox Warranty- 2" Cutting Capacity (51 mm) - Easy to Use Safety Lock Up

Price USA Wt/lbsC742‐100 FX742 Rotary Cutter 102,410.00 15,600S000‐097 Safety Light Kit (Required) 439.00

C742‐630 Through Axle Kit ‐Choose 10 Tires 6,048.00

C742‐635 Walking Axle Kit ‐ Choose 14 Tires 9,706.00

210‐530WG Tire Assembly 11L Stubble Proof (Choose Quanity of Tires Needed 10 or 14 ) 374.00

C742‐250 Pan Kit with Updraft Blades 5,848.00 1,000C742‐260 Pan Kit with Updraft Blades & Shredder Kit 7,179.00 1,190C742‐265 Fixed Knife Kit with Flat Double Sided Blades & Shrouds (For Cotton) 8,960.00 1,600C742‐270 Fixed Knife Kit with Updraft Blades & Shrouds 8,858.00 1,600

Assembly charge on pan units Net 1,200.00

Assembly charge on fixed blade units Net 1,300.00

C742‐500 Single Chains Front & Rear 2,928.00 680C742‐550 Front & Rear Rubber Belting 1,663.00 220C742‐580 Single Chains Front & Rear with Front Rubber Belting 3,667.00 790C742‐525 Double Chains Front and Rear 3,397.00

MASTER PRICE SHEET

CUTTER FEATURES

FX‐742 Rotary Cutter~ The World's Largest Rotary Cutter ~

~ ~ Selection 2 ~ Choose Axle Configuration ~ ~


~ ~ Selection 5 ~ Choose a Safety Guard & Accessories ~ ~


~ ~ Selection 3 ~ Choose Tire Configuration ~ ~


Price USA Wt/lbs

C742‐350 Row Crop Wheel Extensions 848.00 215 (Will accommodate 30", 32", 36", 38", 40" + 1m rows)

(Transport width of 146" or 3.7m)

C742‐NA North American Destination Kit 244.00

C742‐780 7,226.00

C742‐790 7,038.00


C742‐745 HYD Cooler Factory crated 4,782.00


IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors,or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards forrecommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.

Fan Debris Kit, Crated


MASTER PRICE SHEET

NOTE: All Tires Are 11L x 15 x 12 Ply Rated

Fan Debris Kit, Factory Installed

FX‐742 Rotary Cutter~ The World's Largest Rotary Cutter ~

~ ~ Selection 6 ~ Choose Wheel Extension Kit ~ ~


~ ~ Selection 8 ~ Options ~ ~

MASTER PRICE SHEET


Price USA WT(lbs)

C530‐100 Schulte FX‐530, Basic Unit (Required) 51,527.00 9090S000‐097 Safety Light Kit (Required) 439.00

1C530‐810 Trailing Hitch, CV Style 1,924.00 365Choose a Shaft

a) 340‐885WG 1 3/4 inch Tractor Shaft 1,695.00 90b) 340‐875WG 1 3/8 inch Tractor Shaft 1,480.00 90

2C530‐800 Trailing Equal Angle Hitch Sub Assembly 2,398.00 73Must Choose a Hitch Block

a) C502‐821 273.00

b) C502‐822 278.00

c) C502‐828 276.00

Choose a Tractor Shaft: IMPORTANT : PTO Adaptor must not be used in any application.

a) 340‐5505WG Equal Angle Shaft, 1 3/8" x 21 Spline 943.00 597b) 340‐5506WG Equal Angle Shaft, 1 3/4" x 20 Spline 728.00 747

CUTTER FEATURES


Category 4, fits up to a 2” pin and a drawbar 2‐1/2” x 5‐1/8”


‐ 30' of mowing and shredding excellence ‐ Phasing system for parallel lift cut‐ Accommodates 30",32", 36", 38" row spacings ‐ Non‐adjustable clutches provide low ‐ Spun formed pans available on pan unit maintenance‐ Excellent shredding and distribution capabilities ‐ Available Cyclone Deck Debris Fan Kiton Fixed Knife units ‐ 350 hp, 60° degree splitter gearbox allows for ‐ Unique drive layout allows for clutch on every Unique driveline layoutdown box ‐ Floating hitch with rubber grommet rear

suspension




MASTER PRICE SHEET


C530‐350 Row Crop Extensions 788.00

C530‐625 NON WALKING WHEEL STANDARDS (Choose 8 TIRES) 4,528.00

C530‐635 WALKING AXLES (choose 10 TIRES) 6,351.00

C530‐670 Standard Axle Add‐on (Choose 2 tires) 1,305.00

210‐511WG Light Truck Tires (Choose quanity of tires needed 8,10 or 2) 294.00

210‐530WG Tire Assembly 11L Stubble Proof (Choose quanity of tires needed 8, 10 or 2) 374.00

C530‐250 Pans and Updraft Blades 3,853.00 1040

C530‐270 Fixed Knife Kit c/w Shrouds and Updraft Blades 4,282.00 1045C530‐280 Fixed Knife kit c/w Shrouds and Non Updraft Blades (For Cotton) 4,356.00 1045

C530‐500 Front Single Chains 738.00 220

C530‐510 Rear Single Chains 913.00 220

C530‐550 Front Double Chains 972.00 350

C530‐560 Rear Double Chains 1,176.00 350

C530‐570 Half‐length front belting 368.00

C530‐575 Half‐length rear belting 378.00

C530‐580 Front Belting 471.00 75

C530‐590 Rear Belting 490.00 75


~ ~ Selection 3 ~ Choose an Extension Kit ~ ~

~ ~ Selection 4 ~ Choose Axle Kit ~ ~

~ ~ Selection 6 ~ Choose a Pan or FIxed Knife Kit ~ ~

~ ~ Selection 7 ~ Choose a Shielding Kit or Combination ~ ~

~ ~ Selection 5 ~ Choose Tire Kit ~ ~

MASTER PRICE SHEET


C530‐NA North American Decal Kit 138.00

C530‐330 Hydraulic Actuated Outer Wings 1,398.00 180

C530‐920 Crop Dividers 250.00 35

C530‐780 Cyclone Fan Debris Kit, Factory Installed 7,212.00

C530‐790 Cyclone Fan Debris Kit, Crated 7,025.00


C530‐745 HYD Cooler Factory Crated 4,354.00

Assembly Charge on Pan Units Net 850.00Assembly Charge on Fixed Blades Net 900.00

IMPORTANT:


2) OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times.

Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain

guards may be used for agricultural purposes only and are specifically not recommended for highway, right‐of‐way, parks

or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Message in the Rotary Cutter Spec

section in sales price book.

~ ~ Selection 8 ~ Choose Destination Kit ~ ~

~ ~ Selection 9 ~ Choose Options ~ ~



December 2016



















No Charge

No Charge

888-443-3639952-469-5269

25%

Schulte 2019 SBX-75 SBX-87 Snow Blowers 1.16.19.pdf


$0.75

Englefeld

6 Months


SBX-75/SBX-87


Schulte

[email protected]

Lakeville, MN 55044952-469-5267





MASTER PRICE SHEET

USA Effective Date: January 1, 2019

SBX Series Snow blower Specs:Cutting Widths: Replaceable Cutting Blade

Adjustable, replacable skid shoes

Retail Price Wt(lbs)

B750‐100 SBX‐75 Base Unit Includes Hydraulic Rotator and Deflection or 6,371.00B870‐100 SBX‐87 Base Unit Includes Hydraulic Rotator and Deflection 6,522.00

B750‐300 Required Motor Mount Kit 890.00B750‐600 Required Skid Steer Attachment plate 653.00B750‐400 Required Hydralic Valve Block 3,230.00

R500‐345 Control Box Interface (Choose if Brand isn't lited below) 566.00R500‐350 Bobcat Interface Harness 1,252.00R500‐330 CNH Harness Assembly 207.00R500‐335 Cat 14 Harness Assembly 207.00R500‐340 John Deere Harness Assembly 207.00R500‐325 Kubota Harness Assembly 207.00R500‐315 JCB, Tacheuchi, Volvo Harness Assembly 207.00

MACHINE PRICES AND SPECIFICATIONS

SBX-75 75”(191cm), SBX-87 87”(221cm

Standard Skid Steer Mounting Plate and electrical harnesses available for various skid steer model

SBX‐75 / SBX‐87 Skid Steer SNOW BLOWERS


~ ~ Selection 2 ~ Choose Motor Mount Attachment Plate & Valve Block ~ ~

~ ~ Selection 3 ~ Choose Hydraulics and Harness Assembley ~ ~

MASTER PRICE SHEET


116‐213WG 640.00

116‐214WG 783.00

116‐902WG 955.00

116‐903WG 1,009.00

116‐904WG 1,081.00

Assembly 300.00


Net

Hydraulic Motor, 4.9 cu. in. For 11‐14 GPM Flow


Hydraulic Motor,8.0 cu. in. For 20‐24 GPM Flow


Hydraulic Motor,11.9 cu. in. For 30‐35 GPM Flow

SBX‐75 / SBX‐87 Skid Steer SNOW BLOWERS

~ ~ Selection 4 ~ Choose Motor to Match Flow ~ ~

MASTER PRICE SHEET


SBX 3 PT Snow Blower Specs:Cutting Widths: Replaceable Cutting Blade

Adjustable, replacable skid shoesImproved larger chute design

Retail Price Wt(lbs)

B750‐100 SBX‐75 Base Unit Includes Hydraulic Rotator and Deflection or 6,371.00B870‐100 SBX‐87 Base Unit Includes Hydraulic Rotator and Deflection 6,522.00

B750‐200 Required 3 PT Hitch Kit 1,373.00

Assembly Net 150.00


SBX-75 75”(191cm), SBX-87 87”(221cm540 RPM - cat 1 hitch

SBX‐75 / SBX‐87 3 PTSNOW BLOWERS


~ ~ Selection 2 ~ Choose 3PT HITCH (Important: not optional) ~ ~


December 2016




















Schulte

[email protected]

Lakeville, MN 55044952-469-5267

No Charge

No Charge

888-443-3639952-469-5269

25%

Schulte 2019 SDX840 SDX-RDX102 Snow Blowers 1.16.19.pdf


$0.75

Englefeld

6 Months


SDX840, SDX/RDX102 Snow Blowers




COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAMEEdney Distributing Co., Inc. 0000215024/003 8485 215th St W/Lakeville MN/55044 952-469-5267 Mike PetersAdkins Equipment, Inc. 0000208093/001 18323 Cty Hwy 21/Detroit Lakes MN/56501 218-847-4587 Jeff AdkinsBobcat of Bemidji 0000251301/001 3516 Irvine Ave N/Bemidji MN/56601 218-751-4660 Dave NeilsenBobcat of Duluth 0000236269/002 4610 W Arrowhead Rd/Duluth MN/55811 218-727-7377 Dan LindeButler Machinery 0000204147/001 3401 33rd St S/Fargo ND/58104 701-298-1749 Troy DeWiteJaycox Implement 0000194422/001 410 West Roehn/Luverne MN/56156 507-283-2319 Mark OmmenKesteloot Enterprises 0000295830/001 2517 Co. Rd 8/Marshall MN/56258 507-532-0100 Daren KestelootKibble Equipment 0000364257/001 1150 South Victory Dr/Mankato MN/56001 507-387-8201 Ken WagnerLano Equipment 0000213525/001 1015 Hwy 212 W/Norwood MN/55368 952-467-2181 Jack LanoLano Equipment 0000193199/003 6140 Hwy 10/Anoka MN/55303 763-307-2811 Scott FaheyMelrose Implement 0000802356/001 Hwy 13 South/Melrose MN/56352 320-256-4253 Dave WenkerMid-Central Equipment 0000232112/001 50106 US Hwy 210 W/Henning MN/56551 218-583-4124 Dick TranaMiller-Sellner Implement, Inc. 0000198622/001 22024 State Hwy 4/Sleepy Eye MN/56085 507-794-2131 Doug MillerMinnesota Equipment 0000197372/001 13725 Main St/Rogers MN/55374 763-428-4107 Dan ScharberNelson Equipment 0000210256/001 17270 US 59/Thief River Falls MN/56701 218-681-1997 Joel NelsonNiebur Tractor & Equipment, Inc. 0000268650/001 14380 240th St E /Hastings MN/55033 651-437-3531 Dan BeisselNorthland Farm Systems 0000208304/001 3695 Hoffman Dr N/Owatonna MN/55060 507-451-3131 John LoseeOlson Power and Equipment 0000197590/001 38560 14th Ave/North Branch MN/55056 651-674-4494 Dan OlsonRDO Equipment 0000199158/011 1254 S. Tower Rd/Fergus Falls MN/56537 701-526-6665 Jason HintermeisterRDO Equipment 0000199158/013 110 Michael St/Hawley MN/56549 701-526-6665 Jason HintermeisterRDO Equipment 0000199158/010 2900 Main Ave SE/Moorhead MN/56560 701-526-6665 Jason HintermeisterSEMA Equipment, Inc. 0000197244/001 11906 Hwy 14 E MN/55972 507-259-2240 Doug EricksonPlainview Equipment 0000197244/002 RR1 Box 221A MN/55964-9775 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/003 1013 S Section Ave MN/55975-0106 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/004 55083 County RD 4 MN/55964 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/005 2001 4th St NW MN/55912 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/006 11555 Hwy 60 Blvd MN/55983 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/007 610 W Main St MN/55951 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/008 32980 Northfield Blvd MN/55075 507-259-2240 Doug EricksonSEMA Equipment, Inc. 0000197244/009 201 N Hwy 44/76 MN/55921 507-259-2240 Doug EricksonSmiths Mill Implement,Inc. 0000197059/001 63065 206th St/Janesville MN/56048 507-234-5191 Rick EichhorstTitan Machinery 0000251892/015 6340 Hwy 101/Shakopee MN/55379 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/004 315 Hwy 28 E/Graceville MN/56240 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/010 500 Ingersoll Ave/Crookston MN/56716 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/023 2491 St Hwy 200/Ada MN/56510 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/011 17108 US Hwy 59 NE/Thief River Falls MN/56701 952-445-5400 Brenden HonebrinkTitan Machinery 0000251892/012 207 South Borud St/Winger MN/56592 952-445-5400 Brenden HonebrinkTjosvold Equipment 0000202238/001 5352 285th Ave/Granite Falls MN/56241 320-564-2331 Jon TjosvoldTruman Welters Tractor and Equip. 0000193702/001 1600 Hwy 55 E/Buffalo MN/55313 763-682-2200 Seth StrehlerWabasha Implement 0000212699/001 840 N Wabasha/Plainview MN/55964 507-534-2004 Jack Decker

MASTER PRICE SHEET


RDX-102 Snow Blower Specs:Cutting Width: 102" Adjustable, replacable skid shoesTractor HP: 85 - 140 HP (63 - 104 kw) Replaceable Cutting Blade Cutting Height: 37" Gear Driven RotatorOverall Height: 100" High molecular plastic chute rotating surfaceAuger Diameter: 23" Double chute deflector on HD and Truck loading chutesFan Diameter: 30" Capacity - Dry Snow / Wet SnowFan Type: 4 Paddle 426 tons per hr / 1343 per hr

PTO Speed: 540 or 1000 rpm

Retail Price Weight (lbs)

B103-000 RDX-102 (102" Rotating Drum Snow Blower) 12,209.00 2129

340-924WG Size 9 Heavy Duty PTO Shaft 540 RPM 755.00 44340-927WG Size 9 Heavy Duty PTO Shaft (for TV-145 Engine End) 540 RPM 785.00 44

Optional Gear Gbox

B102-175 1000 RPM Gear Box STANDARD 1,666.00

B102-175R 1000 RPM Gear Box CCW 1,856.00Power Shaft for 1000 RPM Gear Box

340-928WG 1-3/8 21 Spline shaft 1000 RPM 814.00

NOTE: Do not order shaft if going on a FM350

B110-270 Heavy Duty Chute Kit with Dbl Chute Deflector 1,429.00 155B840-250 Cylinder Kit for B110-270 (Required) 398.00 27B110-280 Truck Loading Chute Kit with Dbl Chute Deflector 1,931.00 250B110-260 Cylinder Kit for B110-280 (Required) 431.00 31

NOTE: Cylinder kits are complete with 2" x 6" cylinder & hosesB102-250 Folding Truck Loading Chute 3,414.00

NOTE: Hoses & Two Cylinders Included in B102-250

B890-300WG Gauge Wheels with Tapered Roller Bearings 1,342.00 50Assembly Net 100.00


RDX‐102 SNOW BLOWER


~ ~ Selection 2 ~ Choose a Power Shaft ~ ~

~ ~ Selection 3 ~ Choose a Chute Kit ~ ~

MASTER PRICE SHEET


Cutting Width: 102" Adjustable, replacable skid shoesCutting Height: 35" Replaceable Cutting Blade Overall Height: 96" Gear Driven RotatorAuger Diameter: 23" Hydraulic Chute RotationFan Diameter: 30" Capacity Dry Snow/Wet SnowFan Type: 4 Paddle 388 Tons per hr / 1222 tons per hrDrive: 540 or 1000 RPM Tractor HP: 85 - 140 HP (63 - 104 kw)


B102-000 SDX102 Standard Drum Snow Blower 8,675.00 1500

340-924WG Size 9 Heavy Duty PTO Shaft 540 RPM 755.00 44340-927WG Size 9 Heavy Duty PTO Shaft (for TV-145 Engine End) 540 RPM 785.00 44

Optional Gear Gbox

B102-175 1000 RPM Gear Box STANDARD 1,666.00

B102-175R 1000 RPM Gear Box CCW 1,856.00

Power Shaft for 1000 RPM Gear Box

340-928WG 1-3/8 21 Spline shaft 1000 RPM 814.00NOTE : Do not order above shaft if going on a FM350 or FM115


SDX‐102 SNOW BLOWER



MASTER PRICE SHEET

This list supersedes all previous lists.






B960-260 3pt Extension Kit - no shaft incl. (For SDX102 units built in 2014 or earlier) 706.00 60B890-300WG Gauge Wheels with Tapered Roller Bearings 1,342.00 50

Assembly Net 100.00


~ ~ Selection 3 ~ Choose a Chute Kit ~ ~



MASTER PRICE SHEET


USA

Cutting Width: 84" Adjustable, replacable skid shoesCutting Height: 30" Replaceable Cutting Blade Overall Height: 78" Gear Driven RotatorAuger Diameter: 18" Hydraulic Chute RotationFan Diameter: 26" Capacity Dry Snow/Wet SnowFan Type: 4 Paddle 258 Tons per hr / 810 tons per hr

Drive: 540 RPM Tractor HP 55 - 85 (41 - 63 kw)


B840-000 SDX-840 Snow Blower with Chute 7,892.00 1044

340-924WG Heavy Duty PTO Shaft (Size 9) 755.00 36

B840-250 Hyd Cylinder Kit for Chute Deflector (2"x6" cyl & hoses) 398.00 40B701-260 3Point Extension Kit ( No Shaft Included) 627.00 110B890-290WG Gauge Wheels with Tapered Roller Bearings 1,497.00 50B965-115 Manual Chute Bar for Chute Deflector 82.00 5

Assembly Net 100.00







December 2016




















Schulte

[email protected]

Lakeville, MN 55044952-469-5267

No Charge

No Charge

888-443-3639952-469-5269

25%

Schulte 2019 SDX-RDX117 Snow Blowers1.16.19.pdf


$0.75

Englefeld

6 Months


SDX/RDX 117 Snow Blowers





MASTER PRICE SHEET


RDX-117 Snow Blower Specs:Cutting Width: 117" Adjustable, replaceable skid shoesTractor HP: 140 - 220 HP Replaceable & reversible Cutting Blade Cutting Height: 45.5" Gear Driven RotatorLower Auger Diameter: 23" High molecular plastic chute rotating surfaceUpper Auger Diameter: 14" Double chute deflector on HD and Truck loading chutesFan Diameter: 38" Capacity - Dry Snow / Wet SnowFan Type: 5 Paddle 762 tons per hr / 2394 per hr

Drive: 1000 RPM


B118-000 RDX-117 (117" Snow Blower) 17,315.00 2129

330-655WG Standard Gearbox (tractors with cw pto rotation) 3,784.00 175330‐655R Non-standard Gearbox (tractors with ccw pto rotation) 3,936.00 175

340-926WG 1-3/4 Z20 (size 9) for SDX-117 / RDX-117 763.00 52340-925WG 1-3/8 Z21 (size 9) for SDX-117 / RDX-117 757.00 52NOTE : Do not order above shaft if going on a FM350




~ ~ Selection 2 ~ Choose a Gear Box ~ ~


MASTER PRICE SHEET






B890-300WG Gauge Wheels with Tapered Roller Bearings 1,342.00 50

Assembly Net 100.00


~ ~ Selection 4 ~ Choose a Chute kit ~ ~


MASTER PRICE SHEET


SDX-117 Snow Blower Specs:Cutting Width: 117" Adjustable, replaceable skid shoesTractor HP: 140 - 220 HP Replaceable & reversible Cutting Blade Cutting Height: 45.5" Gear Driven RotatorLower Auger Diameter: 23" High molecular plastic chute rotating surfaceUpper Auger Diameter: 14" Double chute deflector on HD and Truck loading chutesFan Diameter: 38" Capacity - Dry Snow / Wet SnowFan Type: 5 Paddle 762 tons per hr / 2394 per hr

Drive: 1000 RPM


B117-000 SDX-117 (117" Snow Blower) 12,618.00 2129

330-655WG Standard Gearbox (tractors with cw pto rotation) 3,784.00 175330-655R Non-standard Gearbox (tractors with ccw pto rotation) 3,936.00 175

340-926WG 1-3/4 Z20 (size 9) for SDX-117 / RDX-117 763.00 52340-925WG 1-3/8 Z21 (size 9) for SDX-117 / RDX-117 757.00 52NOTE : Do not order above shaft if going on a FM350




~ ~ Selection 2 ~ Choose a Gear Box ~ ~


MASTER PRICE SHEET






B890-300WG Gauge Wheels with Tapered Roller Bearings 1,342.00 50

Assembly Net 100.00


~ ~ Selection 4 ~ Choose a Chute kit ~ ~



December 2016




















Schulte

[email protected]

Lakeville, MN 55044952-469-5267

No Charge

No Charge

888-443-3639952-469-5269

25%

Schulte 2019 Rock Pickers SMR 600-800 Power Rake1.16.19.pdf


$0.75

Englefeld

6 Months


SMR 600/800 Power Rake






USA

Weight (approximate) 1900 lbs (862 kg) Drum width 89" (2.26 m)Transport width 102” ( 2.59 m) Tires 23” forklift (58 cm)

USA LIST

R500‐100 2,764.00

R500‐315 207.00R500‐320 207.00R500‐325 207.00R500‐330 207.00R500‐335 207.00R500‐340 207.00R500‐345 566.00R500‐350 Interface Harness for Bobcat 1,252.00

R500‐115 2,659.00Choose One:

R500‐185 761.00R500‐180 978.00R500‐120 2,037.00

R500‐130 913.00R500‐135 Floating Mount 1,997.00

R500‐610 2,134.00

R500‐205 Hydraulic Rotating option 3,103.00R500‐210 Manual Pivot Option 393.00

R500‐215 983.00R500-220 1,488.00R500-225 1,494.00R500-230 1,503.00R500-235 1,586.00

Assembly Net 150.00

Landscaping, levelling, seedbed prep – Target RPM from 175-260Large debris removal, rock windrowing – Target RPM from 110-140

Sweeping – Target RPM 210

Interface Harness for CNH

MASTER PRICE SHEET


SPECIFICATIONS

Skid‐steer Windrower Base Unit

Interface Harness,JCB/TakeuchiInterface Harness,VolvoInterface Harness,Kubota

Standard Wheels

Interface Harness for Cat (14 pin)Interface Harness for JohnDeereElectric Harness With Switch Box

Standard Drum

Sweeper Broom

Drive Option 9.9 CU.IN. Motor Drive Option 19.0 CU.IN. Motor Drive Option 24.0 CU.IN. Motor

2.5 Inch 450 BHN Steel Replaceable Teeth or4 Inch 450 BHN Steel Replaceable Teeth

Drive Option 8.0 CU.IN. Motor Drive Option 15.0 CU.IN. Motor

Standard Mount

SMR‐800 Multi Skid‐steer Windrower/Landscape Rake/Sweeper


~ ~ Selection 3 ~ Choose Drum Configuration ~ ~

~ ~ Selection 4 ~ Choose Mount ~ ~

~ ~ Selection 5 ~ Choose Wheel Option (must pick) ~ ~

~ ~ Selection 6 ~ Choose Rotation ~ ~

~ ~ Selection 7 ~ Choose Flow Option ~ ~

Use this flow chart to determine the proper Drive option

~ ~ Selection 2 ~ Choose One Correct Harness (With Hydraulic Rotating Opt only) ~ ~


USA

Weight (approximate) 1600 lbs (725 kg) Drum width 73" (1.85m)Transport width 88" (2.23m) Tires 23” forklift (58 cm)

USA LIST

R700‐100 2,690.00

R500‐315 207.00R500‐320 207.00R500‐325 207.00R500‐330 207.00R500‐335 207.00R500‐340 207.00R500‐345 566.00R500‐350 Interface Harness for Bobcat 1,252.00

R700‐115 2,227.00Add Replacemnent Teeth

R700‐120 587.00R700‐125 741.00

R500‐130 913.00R500‐135 Floating Mount 1,997.00

R700‐600 1,366.00

R700‐215 Hydraulic Rotating option 3,033.00R500‐210 Manual Pivot Option 393.00

R500‐215 983.00R500-220 1,488.00R500-225 1,494.00R500-230 1,503.00R500-235 1,586.00

Assembly Net 150.00

Landscaping, levelling, seedbed prep – Target RPM from 175-260Large debris removal, rock windrowing – Target RPM from 110-140

Interface Harness for CNH

MASTER PRICE SHEET


SPECIFICATIONS

Skid‐steer Windrower Base Unit

Interface Harness,JCB/TakeuchiInterface Harness,VolvoInterface Harness,Kubota

Interface Harness for Cat (14 pin)Interface Harness for JohnDeereElectric Harness With Switch Box

Standard Drum with Replaceable Teeth

2.5 Inch 450 BHN Steel Replaceable Teeth or4 Inch 450 BHN Steel Replaceable Teeth

Standard Mount

Drive Option 15.0 CU.IN. Motor Drive Option 9.9 CU.IN. Motor Drive Option 19.0 CU.IN. Motor Drive Option 24.0 CU.IN. Motor

Standard Wheels

Drive Option 8.0 CU.IN. Motor

SMR‐600 Multi Skid‐steer Windrower/Landscape Rake/Sweeper


~ ~ Selection 3 ~ Choose Drum Configuration ~ ~

~ ~ Selection 4 ~ Choose Mount ~ ~

~ ~ Selection 5 ~ Choose Wheel Option (must pick) ~ ~

~ ~ Selection 6 ~ Choose Rotation ~ ~

~ ~ Selection 7 ~ Choose Flow Option ~ ~

Use flow chart to determine the proper Drive option

~ ~ Selection 2 ~ Choose One Correct Harness (With Hydraulic Rotating Opt only) ~ ~


December 2016



















No Charge

No Charge

888-443-3639952-469-5269

25%

Schulte SV Folding V blade 1.17.16.pdf


$0.75

Englefeld

6 Months


SV Folding 3pt V-Blade


Schulte

[email protected]

Lakeville, MN 55044952-469-5267






PART # USA LIST

V200-100 9,429.00V100-300 318.00

V100-115 413.00V100-120 419.00V100-125 463.00

V100-110 4,535.00

V100-150 309.00

V100-160 1,307.00

V100-200 4,848.00

V100-250 398.00

V100-260 1,312.00

V100-400 5,148.00

V100-450 451.00

V100-460 1,424.00

SCHULTE SV Standard FOLDING 3pt V-BLADE

DESCRIPTION

BASE UNIT (Required)Solid Edge (Must Pick)

Hitch Options, Pick OneCAT 2 HITCH (Fits Front Mount Frame )CAT 2 QUICK HITCHCAT 3 HITCH (Fits Standard, Narrow & Quick Hitch CAT 3 Attachments)

10' BLADE OPTIONMust Pick For 10' Blade Option

10' STEEL CUTTING EDGEMust Pick For 10' Blade Option

Blade Options, Choose One: 10', 12' OR 14' BLADE

10' GRATED TOP EXTENSION







www.schulte.ca

Documents

(State & Zip Code)...18323 Cty Hwy 21/Detroit Lakes: MN/56501 218-847-4587: Jeff Adkins Bobcat of Bemidji: 0000251301/001 3516 Irvine Ave N/Bemidji: MN/56601 218-751-4660: Dave Neilsen