State of the art Dental Specific

Software 

1. Patient, Doctor, and Lab information is recorded for easy order tracking and processing. For our example, two copings and a

pontic are identified for the construction of a 3 unit bridge.

2. The scanned preparation model is opened, and the user is prompted to identify the anatomy on which he will design the

bridge.

3. The direction of insertion is determined by checking for undercuts on the model.

4. Adjust the margin edge position for the most accurate preparation.

5. Specify your preferences for the amount of gap left for adhesives.

6. Specify coping thickness dimensions.

7. Check coping thickness, and add or remove material using the virtual wax tool. We will now repeat the previous steps for the

second coping.

8. Adjust the margin edge position for the most accurate preparation.

9. Specify preferences for the amount of gap left for adhesives.

10. Specify coping thickness dimensions.

11. Check coping thickness, and add or remove material using the virtual wax tool.

12. Insert a pontic, then morph, position or rotate the pontic by dragging any of the control points. The pontic can be automatically

morphed or trimmed to match the gingival surface.

13. Modify the pontic to your preferences.

14. Change the shape of the connection by dragging control points.

15. Save the finished model.

Contact Thermal Technologies

To get a quote on the Digital Dental Lab Software Contact Thermal Technologies Australia.

Contact Click here