Our warranty is Our bOnd.

Every Stanley VIRAX® pressing tool is covered by a lifetime warranty against material defects

and workmanship. Which basically means that no matter how old the tool is we’ll repair

or replace it for free, at our discretion, should it prove to be defective. If for some reason,

the tool can’t be repaired or replaced, we’ll refund your purchase price. Just show us the

receipt. Not bad, eh? Naturally, there are limitations to any warranty. If, for example, your

friend the crane operator drops an I-beam onto and crushes your shiny new M20+, you

should probably talk to him about a replacement. For the full warranty details, see the users

manual or check them out online at stanleyvirax.com.

Part numbers

PART m20+ P20+

PRESS FITTING mACHINE (14.4V) 253230 INCLUDES 1/2", 3/4", 1" COPPER INSERTS, 2 BATTERIES, CHARGER – AND CASE

PRESS FITTING mACHINE (14.4V) 253026 INCLUDES 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" COPPER JAWS, – 2 BATTERIES, CHARGER AND CASE

COPPER INSERTS 1/2" 252933 3/4" 252934 – 1" 252935

ASTm F1807 INSERTS 3/8" 253220 1/2" 253221 5/8" 253222 – 3/4" 253223 1" 253224

JAW (COPPER) 1/2" 253291 3/4" 253292 1" 253293 – 1 1/4" 253294 1 1/2" 253295 2" 253296

BATTERy 253244 252932

CHARGER 253246 252928

We have nothing against the old ways, but faster is faster, and better

is better. And both make it easier for you to compete. At Stanley VIRAX®,

we engineer our pressing tools with that in mind, packing them with

innovative features that improve productivity, maximize flexibility and

make a pipe tradesmen’s day go easier.

Just how does a company that’s unknown in the U.S. back all that bluster?

First, VIRAX has a serious pedigree. Since 1920, Europe’s most demanding

pros have relied on our plumbing and pipe fitting tools. Second, we’re now

a Stanley company, and Stanley knows industrial tools. For proof look no

further than Stanley Proto®, MAC® Tools and Stanley® Hydraulic Tools.

Simply put, we’re a serious company making tools to be taken seriously.

So read on, then call us or your local representative for a demo. Because

the better your tools are, the better your job is.

Virax, which has been an international leader in plumbing tools for more than 85 years, is a recent addition to the Stanley family of industrial brands. Stanley VIRAX products are engineered in France and the USA and distributed throughout Europe, Asia and North America.

+1 800-827-7558 | stanleyvirax.com

SERIOUS PLUmBING TOOLS™

industriaL PressinG tOOLs

For an on-site demo, call +1 800-827-7558 or visit stanleyvirax.com for a representative near you.

STANlEy VIRAX IS PRoUd To WoRk WITH FINE MANUFACTURERS REPRESENTATIVES ACRoSS THE U.S.

• Microchip monitors and ensures sufficient power for successful presses

• Mechanical design for easy maintenance

make yOur day GO fast. bLazinG fast.The M20+ and P20+ take four seconds to cycle. And they confirm every connection with a green lEd indicator. Think anyone would notice if you knocked off early?

• Cycles in four seconds — the fastest time on the market

• 180˚ head rotation• Indicator light clearly shows

when a successful press has been completed

• Weighs less than 11 lbs.

m20+ sPecificatiOns

KIT: Includes case, copper inserts for 1/2”, 3/4”, and 1”, 2 batteries and charger

COPPER INSERTS: Compatible with VIEGA ProPress, Elkhart XPress and NIBCO Press System 1/2”, 3/4” and 1” systems

CRImP RING INSERTS: ASTM F1807 for 3/8”, 1/2”, 5/8”, 3/4” & 1” PEX (sold separately)

DRIVE TECHNOLOGy: Electro-Mechanical

PRESSING FORCE: 65Kn radial force inside jaw

CyCLE TImE: Four seconds

HEAD ROTATION: 180°WEIGHT: Kit: 18.7 lbs (8.5 kg) Tool with Jaw & Battery: 10.3 lbs (4.7 kg)

BATTERy: 14.4v, 2.6 Ah Lithium-Ion battery with 30 minute charger

CyCLES BEFOREmAINTENANCE: Auto shut-off at 18,000 with warning from 15,000 to 18,000

•Quick-change inserts handle copper or PEX

• 14.4v li-Ion battery recharges in just 30 minutes

• Narrow body design for easier maneuverability

• Industry leading 4-second cycle time

• Fully galvanized jaws reduce copper build-up and prevent rust and corrosion

• Jaw stabilization technology ensures accurate jaw motion

• 360º head rotation allows for better access to work area

P20+ sPecificatiOns

KIT: Includes case, copper jaws for 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, and 2” copper, 2 batteries and charger

COPPER JAWS: Compatible with VIEGA ProPress®, Elkhart Xpress® and NIBCO Press System® fittings up to 2” and XL & XL-C large diameter systems

PRESSING FORCE: 32Kn hydraulic ram output

DRIVE TECHNOLOGy: Electro-Hydraulic

CyCLE TImE: Four seconds

HEAD ROTATION: 360°WEIGHT: Kit: 76 lbs (34.5 kg) Tool with Jaw & Battery: 15.5 lbs (7 kg)

BATTERy: 14.4v, 2.6 Ah Ni-HM battery with 60 minute charger

CyCLES BEFOREmAINTENANCE: Auto shut-off at 20,000 with warning from 15,000 to 20,000

carryinG Less weiGht arOund the jOb site. The M20+ quick-change inserts

enable you to switch sizes or go

from copper to PEX in a flash, yet

they’re so compact, they slide

into a pocket. Each case can hold

up to eight inserts. Sure beats

lugging seven-pound jaw sets.

• Interchangeable insert system reduces kit weight, eliminates calibration

take a PressinG tOOL fOr a sPin. Both the M20+ and P20+ offer the greatest range

of head rotation in their class. They help you get

into tight areas and quickly make the connection.

demo one, and your head will spin.

• Powerful hydraulic system for maximum power on large diameter

stanley Virax P20+ 1/2” to 2” cordless Pressing tool

with interchangeable jaws

stanley Virax m20+ 1/2" to 1" cordless Pressing tool with interchangeable inserts