Standards List

NORSOK STANDARD/NORref/doc 1 11.04.00

Normative references in NORSOK Standards(as of February 2000)

Standard nr. Tittel Norsok std nr.

ASTM A 352ASTM A 671ASTM A 694ASTM A 788ASTM A 860ASTM A 890ASTM F 467/468ISO 4200MSS-SP-75SAE J 514SAE J 518ISO 13879 Petroleum and Natural Gas Industries - Writing and

Content of a Functional Specification. (Presently at DISstage)

A-001

ISO 13880 Petroleum and Natural Gas Industries - Writing andContent of a Functional Specification. (Presently at DISstage)

A-001

ISO/IEC Directives - Part 1 Procedures for the technical work. A-001ISO/IEC Directives - Part 3 Rules for the structure and drafting of International

Standards.A-001

NORSOK Z-DP-002 Coding System. (Will be renumbered Z-002) A-001NORSOK C-002 Architectural components and equipment C-001NORSOK I-CR-004 Control centre (will be I-004) C-001NORSOK S-DP-001 Technical safety (will be S-001) C-001NORSOK S-DP-002 Working Environment (will be S-002) C-001ASTM A 240 UNS 31803 Heat-Resisting chromium and chromium-nickel

stainless steel plate, sheet, and strip for pressurevessels.

C-002

ISO 140/4 Measurement of sound insulation in building elements.Field measurements of airborne sound insulationbetween rooms.

C-002

ISO 140-3 Acoustics - measurements of Sound Insulation inBuilding and Building Elements - Part 3: LaboratoryMeasurements of Airborne Sound Insulation ofBuilding Elements.

C-002

ISO 354 Acoustics - Measurement of Sound Absorption in aReverberation Room.

C-002

ISO 5660 Fire test - Reaction to fire - Part 1: Rate of heat releasefrom building products (Cone calorimeter method)

C-002

ISO 717 Rating of Sound Insulation in Buildings and ofBuilding Elements.

C-002

ISO/DTR 5658 - 1 Reaction to fire tests - spread of flame - Part 1:Guidance on Flame Spread

C-002

NORSOK S-002 Working environment C-002NORSOK Z-002 Coding system (will be renumbered to Z-002) C-002NS 17305 Aluminium - Wrought aluminium AlSi1Mg C-002NS 3041 Information Signs. Rules for details and location. C-002NS 4210 Safety colours and Safety Signs. C-002NS 6030-33 Marine Industry Signs. C-002NS-EN 10025 Hot rolled products of non-alloy structural steels -

Technical delivery conditionsC-002


NS-ISO 6309 Fire protection, Safety Signs. C-002ANSI B 31.3 Process piping D-001API RP 2R Marine Riser D-001API Spec 4F Drilling and well servicing structures D-001API Spec 7 Rotary drilling equipment (replace with ISO 10424

when issued)D-001

API Spec 8C Drilling and production hoisting equipment (replacewith ISO 13535 when issued)

D-001

API Spec 9A Wire rope D-001API Spec16A Drill Through Equipment (replace with ISO 13533

when issued)D-001

API Spec 16C Choke and kill system D-001API Spec 16D Control systems for drilling well control equipment D-001API RP 16E Design of control systems for drilling well control

equipmentD-001

API Bull 16J Comparison of marine drilling riser analysis D-001API RP 16Q Design, selection, operation and maintenance of marine

drilling riser systems (replace with ISO 13624 whenissued)

D-001

ASME VIII Div. 1 and Div. 2, Pressure vessel code D-001BS 5500 Pressure vessels, accumulators and piping systems: D-001ISO 1000 SI units and recommendations for the use of their

multiples of certainD-001

other units D-001ISO 10423 Specification for valves, wellhead and christmas tree

equipmentD-001

NACE MR-0175 For sour service D-001 NPD Regulations relating to systematic followup of the

working environment. D-001

NS 5820 Suppliers documentation of equipment. D-001TBK 1 - 2 General rules for pressure vessels D-001 ISO 10423 Specification for Wellhead and Christmas Tree

Equipment API D-CR-003

SPEC 6 A Specification for Wellhead and Christmas TreeEquipment

D-CR-003

API SPEC 6FB Specification for Fire Test for End Connections D-CR-003 API SPEC 6FC Specification for Fire Test for valves with selective

back seats. D-CR-003

NORSOK M-CR-503 Cathodic Protection Design D-CR-003 NORSOK M-DP-001 Material Selection D-CR-003 DnV cert. note 2.7-1 Lifting certificate requirements D-CR-003 API RP 16E Design of control systems for drilling well control

equipment D-SR-005

API RP 53 Recommended practice for blow-out preventionequipment systems for drilling wells

D-SR-005

ASTM A 370 Test methods and definitions for mechanical testing ofsteel products.

D-SR-005

ASTM A 450 Specification for general requirements for carbon,ferritic alloy, and austenitic alloy stell tubes

D-SR-005

ASTM E 18 Test methods for rockwell hardness and rockwellsuperficial hardness of metallic materials

D-SR-005

ASTM E 94 Guide for radiographic testing D-SR-005 ASTM E 140-88 Hardness conversion tables for metals D-SR-005 ISO 10400 Formulae and calculation for casing, tubing, drill pipe

and line pipe properties. D-SR-005

ISO 10423 Specification for valves, wellhead and christmas treeequipment

D-SR-005


NACE MR0175 Sulphide stress cracking resistant metallic materials foroil field equipment.

D-SR-005

NORSOK M-702 Drill string components D-010 NORSOK S-002 Working Environment D-010 NORSOK S-003 Environmental Care D-010 NORSOK Z-015 Temporary Equipment D-010 NORSOK D-001 Drilling Facilities D-010 NORSOK D-CR-003 Surface Christmas Tree, Rev. 1, Jan. 1995 D-010 NORSOK D-SR-005 Coiled tubing equipment, Rev 1, Jan. 1996 D-010 NORSOK D-SR-006 Snubbing equipment, Rev. 1, Jan. 1996 D-010 NORSOK D-SR-007 Well testing system, Rev. 1 Jan,. 1996 D-010 NORSOK D-SR-008 Wireline equipment Rev. 1, Oct. 1996 D-010 BS 6755 Part 1: 1986 (1991) = ISO 5208 Specification for

production pressure testing requirements D-010

NACE MR0175 Sulphide Stress Cracking Resistant Metallic Materialsfor Oilfield Equipment, 1997

D-010

NPD Acts, Regulations and Provisions for the PetroleumActivity

D-010

ANIS/ASME B31.3 Process Piping, 1996 D-010 ISO 10407 Petroleum and Natural Gas Industries Drilling and

Production Equipment Drill Storm Design andOperating Limits First Edition, 1993

D-010

ISO 10417 Petroleum and Natural Gas Industries SubsurfaceSafety Valve Systems Design Installation, Operationand Repair First Edition, 1993

D-010

ISO 10423 Petroleum and Natural Gas Industries Drilling andProduction Equipment Specification for Valves,Wellhead and Christmas Tree Equipment First Edition,1994

D-010

ISO 10432 Petroleum and Natural Gas Industries SubsurfaceSafety Equipment Specification First Edition, 1993

D-010

ISO 10433 Petroleum and Natural Gas Industries Drilling andProduction Equipment Specification for WellheadSurface Safety Valves and Underwater Safety Valvesfor Offshore Service First Edition, 1994

D-010

API Bull 6AR Recommended Practice for Repair and Remanufactureof Wellhead and Christmas Tree Equipment, 1994

D-010

API Spec 6FA Specification for Fire Test for Valves, 1994 D-010 API Bull 6FI Bulletin on Performance of API and ANSI End

Connections in a Fire Test According to APISpecification 6FA, 1994

D-010

API Bull 6F2 Bulletin on Fire Resistance Improvements for APIFlangas, 1994

D-010

API RP2K Bruk av stigerr D-010 API Bull 2J Stigerrsanalyse D-010 API Spec 10 Specification for Materials and Testing for Well

Cements, 1990 D-010

API Spec 10D Specification for Bow-Spring Casing Centralises, 1995 D-010 API RP 10E Recommended Practice for Application of Cement

Lining to Steel Tubular Goods, Handling, Installationand Joining Third Edition; ISO 10409, 1994

D-010

API Spec 13A Specification for Drilling Fluid Materials, 1993 D-010 API RP 138-1 Recommended Practice Standard Procedure for Field

Testing Water-Based Drilling Fluids, 1990 D-010

API RP 138-2 Recommended Practice Standard Procedure for FieldTesting Oil-Based Drilling Fluids, 1991

D-010

API RP 13C Recommended Practice for Drilling Fluid Processing D-010


Systems Evaluation, 1996 API RP 13D Recommended Practice on the Rheology and

Hydraulics of Oil-Well Drilling Fluids, 1995 D-010

API RP 13E Recommended Practice for Shale Shaker Screen ClothDesignation, 1993

D-010

API RP 13G Recommended Practice Standard Procedure forDrilling Mud Report Form, 1991

D-010

API RP 13I Recommended Practice Standard Procedure forLaboratory Testing Drilling Fluids, 1995

D-010

API RP 13J Testing of Heavy Brines, 1996 D-010 API RP 14B Design, Installation, Repair and Operation of

Subsurface Safety Valve Systems Fourth Edition; ISO10417; Errata 1996, 1994

D-010

API Spec 14D Specification for Wellhead Surface Safety Valves andUnderwater Safety Valves for Offshore Service, 1994

D-010

API RP 14H Recommended Practice for Installation, Maintenanceand Repair of Surface Safety Valves and UnderwaterSafety Valves Offshore Fourth Edition; ISO 10419,1994

D-010

API RP 17A Recommended Practice for Design and Operation ofSubsea Production Systems, 1996

D-010

API RP 53 Blow-out Prevention Equipment Systems for DrillingWells Third Edition, 1997

D-010

API Spec 5CT Specification for Casing and Tubing (Metric Units)Fifth Edition, 1995

D-010

API Spec 5D Specification for Drill Pipe, 1992 D-010 API Spec 5B Specification for Threading, Gauging and Thread

Inspection of Casing, Tubing and Line Pipe Threads(U.S. Customary Units), 1996

D-010

API Spec 5L Specification for Line Pipe, 1995 D-010 API Spec 5LC Specification for CRA Line Pipe, 1995 D-010 API Bull 5A2 Bulletin on Thread Compounds for Casing, Tubing and

Line Pipe Sixth Edition; Superseded by RP5A3, 1988 D-010

API Bull 5C2 Bulletin on Performance Properties of Casing, Tubingand Drill Pipe, 1987

D-010

API Bull 5C3 Bulletin on Formulas and Calculations for Casing,Tubing, Drill Pipe and Line Pipe Properties, 1994

D-010

API Bull 5C4 Bulletin on Round Thread Casing Joint Pressure andBending, 1987

D-010

API RP 5A5 Recommended Practice for Field Inspection of NewCasing, Tubing and Plain-End Drill Pipe, 1993

D-010

API RP 5B1 Gauging and Inspection of Casing, Tubing and LinePipe Treads Fourth Edition, 1996

D-010

API RP 5C1 Recommended Practice for Care and Use of Casing andTubing, 1994

D-010

API RP 5C5 Evaluation Procedures for Casing and TubingConnections

D-010

API Spec 6D Specification for Pipeline Valves (Gate, Plug, Ball andCheck Valves), 1994

D-010

API Spec 6FB API Specification for Fire Test for End Connections, 1992 D-010 API Spec 6FC Specification for Fire Test for Valves with Automatic

Backseats, 1994 D-010

API Spec 16A Specification for Drill Through Equipment, 1986(replace with ISO 13533 when issued)

D-010

API Spec 14A Specification for Wellhead Surface Safety Valves andUnderwater Safety Valves for Offshore Service FirstEdition, 1994

D-010


API RP 14B Design, Installation, Operation and Repair FirstEdition, 1993

D-010

API RP 14E Recommended Practice for Design and Installation ofOffshore Production Platform Piping Systems, 1991

D-010

API STD 607 Fire Test for Soft-Seated Quarter Turn Valves, 1993 D-010 API Spec 16D Specification for Control Systems for Drilling Well

Control Equipment, 1993 D-010

API Spec 7 Specification for Rotary Drill Stem Elements ThirtyEight Edition; Errata 1994 (replace with ISO 10424when issued)

D-010

API Spec 7F Specification for Oil-Field Chain and Sprockets, 1993 D-010 API RP 7G Drill Stern Design and Operating Limits First Edition,

1993 D-010

API Spec 8C Specification for Drilling and Production HoistingEquipment (PSL 1 and PSL 2), 1992 (replace with ISO13535 when issued)

D-010

API RP 8B Recommended Practice for Procedures for Inspection,Maintenance, Repair and Remanufacture of HoistingEquipment, 1992

D-010

API Spec 9A Specification for Wire Rope, 1995 D-010 API RP 9B Recommended Practice on Application, Care and Use

of Wire Rope for Oil Field Service, 1986 D-010

API RP 10E Recommended Practice for Application of CementLining to Steel Tubular Goods, Handling, Installationand Joining Third Edition; ISO 10409, 1994

D-010

API RP 5C7 Coiled Tubing Operations in Oil and Gas Well ServiceFirst Edition, 1996

D-010

ISO 10423 Valves, wellhead and Christmas tree equipment D-SR-006ANSI/ASME B31.3 Chemical plant and petroleum refinery piping D-SR-007API 17B Recommended practise for flexible pipes D-SR-007API 521 Recommended practice for pressure-relieving and

depressuring systemsD-SR-007

API RP 14C Recommended practice for analysis, design, installationand testing of basic surface safety systems on offshoreproduction platforms

D-SR-007

API RP 14E Recommended practice for design and installation ofoffshore production platform piping systems

D-SR-007

API RP 44 Recommended practice for sampling petroleumreservoir fluids

D-SR-007

API RP 520 Recommended practice for sizing, selection andinstallation of pressure-relieving devices in refineries

D-SR-007

API RP 7G Recommended practice for drill stem design andoperating limits

D-SR-007

API Spec 5CT Specification for casing and tubing D-SR-007API Spec. 14A Specification for sub surface safety valve equipment D-SR-007API Spec. 6A Specification for valves and wellhead equipment D-SR-007ASME VIII Div. 1 and 2 Rules for construction of pressure vessels D-SR-007DNV CN 2.7.1 Offshore freight containers. Design and certification D-SR-007NACE MR-01-75 Sulphide stress cracking resistant metallic materials for

oil field equipmentD-SR-007

API Spec 9A Specification for Wire Rope D-SR-008ISO 10423 Valves, Wellhead and Christmas Tree Equipment D-SR-008NACE MR-0175 Sulfide Stress Cracking Resistant Metallic Materials for

Oil Field EquipmentD-SR-008

EN 50091-1 Uninterruptable power systems (UPS), Part 1: Generaland safety requirements.

E-001

IEC 146-4 Semiconductor convertors, Part 4: Method of E-001


specifying the performance and test requirements ofuninterruptible power systems.

IEC 298 AC metal-enclosed switchgear and controlgear forrated voltages above 1kV and up to and including52kV. (1990-12)

E-001

IEC 34-5 Rotating electrical machines, Part 5: Classification ofdegree of protection provided by enclosures of rotatingelectrical machines (IP code).

E-001

IEC 439-1 Low-voltage switchgear and controlgear assemblies -Part 1: Type-tested and partially type-tested assemblies.

E-001

IEC 76-1 Power transformers, Part 1: General E-001IEC 947-4-1 Low voltage switchgear and control gear, Part 4:

Contactors and motor-starters. Section one -Electromechanical contactors and motor-starters.

E-001

IFEA Guidelines for the documentation of selectivity(discrimination) in a.c. systems.

E-001

IFEA Veiledning for varmekabelanlegg i industri og offshore. E-001NEK 606 Cables for offshore installations Halogen-free, or mud

resistantE-001

NORSOK I-CR-002 Safety and automation systems (SAS) (will berenumbered I-002).

E-001

NORSOK S-002 Working environment. E-001NORSOK S-DP-001 Technical safety (will be renumbered S-001). E-001NORSOK T-CR-001 Telecommunication systems E-001PE Elektrisitetestilsynet; Retningslinjer for jording i

maritime anlegg.E-001

EU 89/336 Electromagnetic compatibility (EMC) of 1989-05-23. E-002IEC 1136-1 Semiconductor power converters, Part 1: Adjustable

speed electric drive systems, general requirements.E-002

IEC 146 Semiconductor converters, Part 1 through 4 as relevant. E-002IEC 1800-2 Adjustable speed electrical power drive systems, Part

2: Rating specifications for low voltage adjustablefrequency AC power drive systems.

E-002

IEC 1800-3 Adjustable speed electrical power drive systems, Part3: EMC product standard including specific testmethods.

E-002

IEC 34 Rotating electrical machines. Parts 1 through 18 asrelevant.

E-002

IEC 551 Determination of transformer and reactor sound levels. E-002IEC 726 Dry type power transformers. E-002IEC 76 Power transformers, Part 1 through 5 as relevant. E-002ISO 1680 Test code for the measurement of airborne noise

emitted by rotating electrical machinery, Part 1:Engineering method for free field conditions over areflecting plane.

E-002

NORSOK E-001 Electrical systems. E-002DNV Classification note 30.4, Foundation G-CR-001NPD Regulation for structural design of loadbearing

structures.G-CR-001

NS 3481 Soil investigation and geotechnical design of marinestructures.

G-CR-001

AMCA 300-96 Reverberant room method for sound testing of fans. H-001AT 391 Arbeidslokaler og personalrom. H-001AT 420 Luftforurensing ved buesveising. H-001AT 444 Klima og luftkvalitet p arbeidplassen. (Order no. 516,

Climate and air quality in the workplace)H-001

ASHRAE Handbook of fundamentals. H-001


BS 5970 Code of practice for Thermal insulation of pipeworkand equipment.

H-001

CIBSE Commissioning codes, series A, air distribution. H-001EN 288 Specification and qualification of welding procedures

for metallic materials.H-001

EN 378 Refrigerating systems and heat pumps - Safety andenvironmental requirements

H-001

EN12238 Ventilation for buildings. Air terminal devices.Aerodynamic testing and rating for mixed flowapplications.

H-001

EN12239 Ventilation for buildings. Air terminal devices.Aerodynamic testing and rating for displacement flowapplications

H-001

ENV 12097 Ventilation for buildings Ductwork Requirementsfor ductwork components to facilitate maintenance ofductwork systems

H-001

Eurovent 2/2 Air leakage rate in sheet metal air distribution systems. H-001Eurovent 2/3 Sheet metal air ducts - Standard for dimensions. H-001Eurovent 2/4 Sheet metal air ducts - Standard for fittings. H-001Eurovent 4/5 Method of testing air filters used in general ventilation. H-001FEB Forskrifter for elektriske bygningsinstallasjoner m.m. H-001HVCA DW 142 Specification for sheet metal ductwork H-001IEC 79-13 Electrical apparatus for explosive gas atmospheres. Part

13: Construction and use of rooms or buildingsprotected by pressurisation.

H-001

IEC 61892-7 Mobile and fixed offshore units- Electricalinstallations- Part 7: Hazardous areas

H-001

ISO 1461 Metallic coatings Hot dip galvanized coatings onfabricated ferrous products - Requirements

H-001

ISO 5135 Acoustics Determination of sound power levels ofnoise from air terminal units, dampers and valves bymeasurement in a reverberation room.

H-001

ISO 5136 Acoustics Determination of sound power radiatedinto a duct by fans and other air moving devices In-duct method

H-001

ISO 7235 Acoustics measurement procedures for ducted silencers- insertion loss, flow noise and for total pressure loss.

H-001

NFPA 96 Standard for ventilation control and fire protection ofcommercial cooking operations.

H-001

NS 3421 Description of technical installations. H-001NS 5575 Ventilation ducts. Identification colours. H-001SMACNA Rectangular industrial duct construction standard. H-001SMACNA Round industrial duct construction standard. H-001UNS S31600 Austenittic stainless steel (type 316) H-001UNS S31603 Austenittic stainless steel (type 316L) H-001BS 5422 Method for specifying Thermal insulating materials on

pipes.H-CR-002

BS 5970 Code of practice for Thermal insulation of pipeworkand equipment.

H-CR-002

DIN 17455 General purpose welded circular stainless steel tubes,Technical delivery conditions.

H-CR-002

DIN 19530 Steel pipes and fittings with slip joint for sewagepipelines, dimensions.

H-CR-002

DIN 2463 Welded austenittic stainless steel tubes; dimensions and H-CR-002NORSOK L-CR-001 Piping and valves H-CR-002NORSOK L-CR-004 Piping fabrication, installation, flushing and testing H-CR-002NORSOK M-DP-001 Materials selection H-CR-002


NS 1758 Copper tubes for capillary soldering. H-CR-002NS 1759 Capillary solder fittings for copper tubes. H-CR-002NS 5581 Pipe threads where pressure-tight joints are not made

on threads.H-CR-002

SDH Forskrift nr. 68: Forskrift om vannforsyning ogdrikkevann mm.

H-CR-002

UNS S31600 Austenittic stainless steel (type 316) H-CR-002UNS S31603 Austenittic stainless steel (type 316L) H-CR-002ANSI B 16.5 Pipe Flanges and Flanged Fittings I-001ANSI B16.10 Face-to-face and end-to-end dimension of valves. I-001ANSI B16.36 Steel orifice flanges I-001ANSI/ASME Performance Test Codes 19.3 - 1974, chapter 1, section

8-19 Thermowells.I-001

ANSI/ASME B1.20.1 Pipe threads general purpose (imperial units) I-001ANSI/FCI 70-2 Control valve seat leakage. I-001API RP 520 Sizing, Selection ,and Installation Of Pressure-

Relieving Devices in Refineries, Part and .I-001

API RP 526 Flanged steel safety relief valves. I-001API RP 527 Seat Tightness of Pressure Relief Valves. I-001API RP 670 Vibration, axial position and bearing temperature

system.I-001

API RP 678 Accelerometer-based Vibration Monitoring System. I-001ASME VIII Boiler and pressure vessel code - Section VIII, Div. 1. I-001BS 2915 Bursting Discs and Bursting Disc Devices I-001EN 50081-2 Electromagnetic compatibility generic emission

standardI-001

EN 50081-2 Electromagnetic compatibility generic immunitystandard

I-001

EN 60534-2 - / IEC 534-2 Industrial process control valves. Part 2, section 1 and2.

I-001

EN 60584-1/2 / IEC 584-1 Thermocouples I-001EN 60751 / IEC 751 Resistance Temperature Detectors (RTD) I-001ISA 75.01 Flow equations for sizing control valves. I-001ISO 1000 SI Units and recommendation for the use of their

multiples and of certain other units.I-001

ISO 5167 Measurement of fluid flow by means of pressuredifferential devices - Part 1.

I-001

NAMUR Normenarbeitsgemeinschaft fr Mess - undRegelungstechnik in der Chemischen Industrie

I-001

NFPA 72E 3-3 Temperature Classification I-001NORSOK L-002 Piping Design, Layout and Stress Analysis I-001NORSOK L-CR-003 Piping Details (will be renumbered L-003) I-001NORSOK M-501 Surface Preparation and Protective Coating I-001NORSOK I-002 Safety and Automation Systems (SAS) I-005NORSOK L-003 Piping details I-005NORSOK Z-004 CAD Symbol Libraries I-005IEC 61131-1 Programmable controllers Part 1: General

informationI-005

IEC 61131-3 Programmable controllers Part 3: Programminglanguages

I-005

ISO 3511 (all parts) Process measurement control functions andinstrumentation Symbolic representation

I-005

NS 1710 Technical drawings Drawing symbols for pipingsystems

I-005

NS 1438 Process measurement control functions andinstrumentation Symbolic representation Part 1:

I-005


Basic requirementsAGA 7 Measurement of gas by turbine meters -AGA

Transmission Measurement Committee Report No. 7.I-104

AGA 8 Compressibility factors of Natural Gas and otherrelated hydrocarbon gases, AGA TransmissionMeasurement Committee Report No. 8.

I-104

API MPMS Chap. 13 I-104ASTMD 1945 Analysis of natural gas by gas chromatography I-104BIPM et.al. *) OIML P17, Guide to the expression of Uncertainty in

Measurements.I-104

ECMA-TR25 OSI sub-network interconnection scenarios permittedwithin the framework of ISO-OSI ref. model.

I-104

EN 60751 Industrial Platinum Resistance Thermometer sensors I-104IP PMM Part VII Continuous Density Measurement I-104ISO 1000 SI units and recommendations for use of their multiples

and of certain other units.I-104

ISO IEC 3309 Telecommunication and information; exchangebetween systems; high level datalink control (HDLC)procedure; frame structure.

I-104

ISO 5024 Measurement - Standard reference conditions I-104ISO 5167-1 Measurement of fluid flow by means of pressure

differential devices Part 1: Orifice plates, nozzles andVenturi tubes inserted in circular cross-section conduitsrunning full

I-104

ISO 6551 Petroleum Liquids and Gases - Fidelity and Security ofDynamic Measurement - Cabled Transmissions ofElectric and/or Electric Pulsed Data

I-104

ISO 6568 Natural gas - Simple analysis by gas chromatography I-104ISO 6976 Natural gas - Calculation of calorific values, density,

relative density and Wobbe index from compositionI-104

ISO 9000-3 Guidelines for the application of the ISO 9001 to thedevelopment, supply and maintenance of software.

I-104

ISO 9951 Measurement of gas flow in closed conduits - Turbinemeters

I-104

ISO 10715 Natural Gas Sampling Guidelines I-104ISO 10723 Performance evaluation of on line analytical systems I-104ISO 12213-1 Natural gas - Calculation of compression factor Part

1: Introduction and guidelinesI-104

ISO 12213-2 Natural gas - Calculation of compression factor Part2: Calculation using molar-composition analysis

I-104

ISO 12213-3 Natural gas - Calculation of compression factor Part3: Calculation using physical properties

I-104

API MPMS Manual of petroleum measurement standard, chap. 4, 5,11-13.

I-105

API MPMS, clause 8.2 Automatic sampling of petroleum and petroleumproducts.

I-105

API MPMS, clause 10.9 (corresponds to IP 386/90) I-105ASTM-D-4928-89 (corresponds to IP 386/90) I-105BIPM, et.al.*) OIML P17, Guide to the expression of Uncertainty in

Measurements.I-105

ECMA-TR25 OSI sub-network interconnection scenarios permittedwithin the framework of ISO-OSI ref. model.

I-105

EN 60751 Industrial Platinum Resistance Thermometer sensors I-105IP 386/90 Determination of water content of crude oil -

Coulometric Karl Fischer methodI-105

IP PMP No. 2 Guidelines for users of Petroleum Measurement Tables I-105IP PMM Part VII Continuous Density Measurement I-105


ISO 1000 SI units and recommendations for use of their multiplesand of certain other units.

I-105

ISO 3170 Petroleum Liquids - Manual Sampling I-105ISO 3171 Petroleum Liquids - Automatic pipeline sampling. I-105ISO IEC 3309 Telecommunication and information; exchange

between systems; high level datalink control (HDLC)procedure; frame structure.

I-105

ISO 5024 Measurement - Standard reference conditions I-105ISO 5167-1 Measurement of fluid flow by means of pressure

differential devices Part 1: Orifice plates, nozzles andVenturi tubes inserted in circular cross-section conduitsrunning full

I-105

ISO 6551 Petroleum Liquids and Gases - Fidelity and Security ofDynamic Measurement - Cabled Transmissions ofElectric and/or Electric Pulsed Data.

I-105

ISO 7278 Part 3 Liquid hydrocarbons - Dynamic measurement - Provingsystems for volumetric meters"

I-105

ISO 9000-3 Guidelines for the application of the ISO 9001 to thedevelopment, supply and maintenance of software.

I-105

ISO 10723 Performance evaluation of on line analytical systems I-105EN 50081-2 Electromagnetic compability generic emission

standard.I-CR-002

EN 50082-2 Electromagnetic compability generic immunitystandard.

I-CR-002

ISO 10418 Recommended practice for analysis, design, installationand testing of basic surface safety systems on offshoreproduction platforms.

I-CR-002

NORSOK S-DP-001 Technical safety I-CR-004NORSOK S-DP-002 Working environment I-CR-004NORSOK C-CR-001 Living quarters area I-CR-004NORSOK I-CR-002 Safety and automation systems I-CR-004NORSOK O-DP-001 Operational principles I-CR-004NPD YA-538 Menneske maskin forhold i kontrollrom (Not published

in English)I-CR-004

ICS/ISF Guidelines on the Application of the IMO InternationalSafety Management Code

J-003

IMCA Guidance Note No IMCA D 010: Diving Operationsfrom Vessels Operating in Dynamically PositionedMode.

J-003

IMO A.469 (XII) Guidelines for the Design and Construction of OffshoreSupply Vessels.

J-003

IMO A.481 (XII) Principles of Safe Manning. J-003IMO A.538 (13) Maritime Safe Training of Personnel on Mobile

Offshore Units.J-003

IMO A.741 (18) International Safety Management (ISM) Code. J-003IMO MSC/Circ. 645 Guidelines for Vessels with Dynamic Positioning

SystemsJ-003

ISO 9000 International Standard: Quality management andQuality Assurance Standards.

J-003

MARPOL 73/78 International Convention for the Prevention ofPollution from Ships 1973, as modified by Protocol of1978.

J-003

MODU Code Code for the Construction and equipment of MobileOffshore Drilling Units.

J-003

NMD Regulations for Mobile Offshore Units J-003NMD The Norwegian Ship Control Legislation J-003NMD Guidelines and Notes for Mobile Offshore Units J-003


SOLAS 74 International Convention for the Safety of Lives at Sea(SOLAS), as amended.

J-003

STWC International Convention on Standards of Training,Certification and Watch keeping for Seafarers, 1978.

J-003

ASME B 31.3 Process Piping L-002DNV Guidelines for flexible pipes L-002ISO 10420 Flexible pipe systems for subsea and marine riser

applications (based on API RP 17B)L-002

ISO 5167 Measurement of fluid flow L-002NORSOK L-001 Piping and valves L-002NORSOK L-003 Piping detail (presently L-CR-003) L-002NORSOK P-001 Process design L-002NORSOK R-001 Mechanical equipment L-002NORSOK S-001 Technical safety L-002NORSOK S-002 Working environment L-002NORSOK Z-002 Coding system (presently Z-DP-002) L-002ANSI B1.1 Unified Inch Screw Threads L-001ANSI/SAE J518 Hydraulic Flanged Tube, Pipe and Hose Connections,

Four-Bolt Split Flange TypeL-001

API 594 Check Valves: Wafer-Lug, and Double Flange Type L-001API 598 Valve Inspection and Testing L-001API 599 Metal Plug Valves Flanged and Welding Ends L-001API 600 Steel Gate Valves Flanged and Butt-Welding Ends L-001API 602 Compact Steel gate Valves Flanged, Threaded,

Welding and Extended Body EndsL-001

API 609 Lug and Wafer Type Butterfly Valves L-001API 6A Specification for Wellhead and Christmas Tree

EquipmentL-001

API 6BX Volume Correction Factor L-001API 6D Specification for Pipeline Valves (Gate; Plug, Ball and

Check Valves)L-001

API 6FA Specification for Fire Tests for Valves L-001ASME B1.20.1 Pipe Threads, General Purpose L-001ASME B16.10 Face-to Face and End-to-End Dimension of Valves L-001ASME B16.11 Forged Fittings, Socket-Welding and Threaded L-001ASME B16.20 Metallic Gaskets for Pipe Flanges Ring Joint, Spiral

Wounds and JacketedL-001

ASME B16.21 Nonmetallic Flat gaskets for Pipe Flanges L-001ASME B16.25 Buttwelding Ends L-001ASME B16.34 Valves Flanged, Threaded and Welding Ends L-001ASME B16.36 Orfice Flanges L-001ASME B16.5 Pipe Flanges and Flanged Fittings L-001ASME B16.9 Factory-Made Wrought Steel Buttwelded Fittings L-001ASME B18.2.2 Square and Hex Nuts L-001ASME B31.3 Process Piping L-001ASME B36.10 Welded and Seamless Wrought Steel Pipes L-001ASME B36.19 Stainless Steel Pipes L-001ASME IX BPVC Section 9 Welding and Brazing Qualification L-001ASME VIII ASME Boiler and Pressure Vessel Code L-001ASTM A123 Specification Zinc (Hot-Dip Galvanized) Coatings on

Iron and Steel ProductsL-001

ASTM A153 Specification for Zinc Coating L-001ASTM A182 Specification for Forged or Rolled Alloy-Steel Pipe

Flanges, Forged Fittings, and Valves and Parts for HighTemperature Service

L-001

ASTM A193 Specification for Alloy-Steel and Stainless Steel L-001


Bolting Materials for High Temperature ServiceASTM A194 Specification for Carbon and Alloy Steel Nuts for Bolts

for High-Pressure and High-Temperature ServiceL-001

ASTM A320 Specification for Alloy-Steel Bolting Materials for LowTemperature Service

L-001

ASTM A351 Specification for Steel Castings, Austenitic, for HighTemperature Service

L-001

ASTM A564 Specification for Hot-Rolled and Cold-Finished AgeHarding Stainless and Heat Resisting Steel Bares, Wireand Shapes

L-001

ASTM A705 Specification for Age-Harding Stainless and HeatResisting Steel Forgings

L-001

ASTM D2240 Test Methods for Rubber Property DurometerHardness

L-001

ASTM F36 Test Methods for Compressibility and recovery ofGasket Materials

L-001

ASTM F467 Specification for Nonferrous Nuts for General Use L-001ASTM F468 Specification for Nonferrous Bolts, Hexlap Screws, and

Studs for General UseL-001

ASTM G48 Test Methods for Fittings and Crevice CorrosionResistance of Stainless Steel and Related Alloys by useof Ferric Chloride Solutions

L-001

BS 1832 Specification for Compressed Asbestos Fibre Jointing L-001BS 1868 Specification for Check Valves (flanged and

buttwelding ends) for the Petroleum, Petrochemical andallied Industries

L-001

BS 1873 Specification for Steel Globe and Globe Stops andCheck Valves (Flanged and Butt-Welding Ends) for thePetroleum, Petrochemical and allied Industries

L-001

BS 3799 Specification for Steel Pipe Fittings, Screwed andSocket-Welding for the Petroleum Industry

L-001

BS 5155 Specification for Butterfly Valves L-001BS 5351 Specification for Steel Ball Valves for the Petroleum,

petrochemical and allied IndustriesL-001

BS 5352 Specification for Steel Wedge Gate, Globe and CheckValves 50 mm and Smaller for the Petroleum,Petrochemical and allied Industries

L-001

BS 6755-1 Testing of Valves. Specification for ProductionPressure Testing

L-001

BS 6755-2 Testing of Valves. Specification for Fire Type Testing L-001DIN 2391 Nahtlose Przisionsstahlrohre mit besonderer

Massengenaugkeit Teil 1 MasseL-001

EN 10204 Metallic Products Types of Inspection Documents L-001ISO 4200 Plain End Steel Tubes, Welded and Seamless L-001ISO 5210 Industrial Valves Multi Turn Valve Actuator

AttachmentsL-001

ISO 5211 Part-Turn Valve Actuator Attachment L-001ISO 5752 Metal Valves for Use in Flanged Pipe Systems L-001ISO 8434-1 Metallic Tube Connections Fluid Power and General

Use. Part 1: 24 Degree Compression FittingsL-001

MSS-SP-25 Standard Marking Systems for Valves, Fittings, Flangesand Unions

L-001

MSS-SP-44 Steel Pipeline Flanges L-001MSS-SP-75 Specification for High Test Wrought Butt Welding

FittingsL-001

MSS-SP-97 Integrally Reinforced Forged Branch Outlet Fittings Socket Weldings, Threaded and Buttwelding Ends

L-001


NACE MR0175 Sulfide Stress Cracking Resistant Metallic Materials forOilfield Equipment

L-001

NORSOK L-CR-001 Piping and valves L-CR-003ASME B 2.1 Pipe threads, general purpose L-CR-004ASME B 31.3 Chemical plant and petroleum refinery piping L-CR-004DIN 2505 Flanged joint calculation L-CR-004ISO 4406 Hydraulic fluid power-fluids-method for coding level

of contamination by solid particlesL-CR-004

ISO 9095 Steel tubes - Continuous character marking and colourcoding for material identification

L-CR-004

NORSOK L-CR-001 Piping and valves L-CR-004Norsok M-CR-601 Welding and inspection of piping L-CR-004NORSOK Z-DP-002 Coding system L-CR-004NS 4054 Colour for identification. L-CR-004NS 813 Piping systems. Identification colours for the content. L-CR-004API 5L Specification for Line Pipe. To be replaced by ISO

3183-3 when available.M-001

API 6A Drilling and Production Equipment - Specification forValves, Wellhead and Christmas tree equipment. To bereplaced by next revision of ISO 10423 when available.

M-001

API RP 17J Specification for unboned Flexible Pipe. M-001ASME B 31.3 Process Piping. M-001ASTM A 193 Specification for Alloy-Steel and Stainless Steel

Bolting Materials for High-Temperature Service.M-001

ASTM A 194 Specification for Carbon and Alloy Steel Nuts for Boltsfor High-Pressure and High-Temperature Service.

M-001

ASTM A 320 Specification for Alloy Steel Bolting Materials for Low- Temperature Service.

M-001

ASTM D 2992 Practice for Obtaining Hydrostatic or Pressure DesignBasis for Fibreglass Pipe and Fittings.

M-001

BS MA 18 Salt Water Piping in Ships. M-001DNV Guidelines for Flexible Pipes, 1987. M-001DNV RP B201 metallic Materials in Drilling, Production and Process

Systems.M-001

EFC Publ. No. 16 Guidelines on material Requirements for Carbon andLow Alloy Steels for H2S Environments in Oil and GasProduction.

M-001

EFC Publ. No. 17 Corrosion Resistant Alloys for Oil and Gas Production.Guidance on General Requirements and Test Methodsfor H2S Service.

M-001

ISO 11960 Steel pipes for use as casing or tubing for wells.(Replace API 5 CT)

M-001

ISO 898 Mechanical properties of fasteners. M-001MTI manual No. 3 Guideline Information on Newer Wrought Iron and

Nickel-base Corrosion Resistant Alloys, Phase 1,Corrosion Test methods. (Appendix B, Method MTI-2).

M-001

NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materialsfor Oilfield Equipment.

M-001

NORSOK L-CR-001 Piping and Valves (will be renumbered L-001) M-001NORSOK M-101 Structural Steel Fabrication M-001NORSOK M-120 Material Data Sheets for Structural Steel M-001NORSOK M-121 Aluminium Structural Materials M-001NORSOK M-501 Surface Preparation and Protective Coating M-001NORSOK M-503 Cathodic Protection Design M-001NORSOK M-506 CO2 Corrosion rate calculation model (will be issued

shortly)M-001


NORSOK M-601 Welding and Inspection of Piping M-001NORSOK M-630 material Data Sheets for Piping M-001NORSOK M-CR-621 GRP Piping Materials (will be renumbered M-621) M-001NORSOK M-CR-650 Qualification of Manufacturers of Special materials

(will be m-650)M-001

NORSOK M-CR-710 Qualification of Non-metallic Sealing Materials andManufacturers (will be renumbered M-710)

M-001

NS 3420 Beskrivelsestekster for bygg og anlegg (Specificationtexts for building and construction).

M-001

NS 3473 Concrete Structures. Design Rules. M-001UKOOA Specification and Recommended Practices for the Use

of Glass Fibre Reinforced Plastic Piping Offshore.M-001

API 2B Specification for fabricated structural steel pipe. M-101API RP 2X Ultrasonic examination of offshore structural

fabrications.M-101

ASME V Non-destructive testing. M-101BS 7448, Part 1 Fracture mechanics toughness tests. M-101BSI PD6493 Guidance on some methods for the derivation of

acceptance levels for defects in fusion welded joints.M-101

DNV RP D404 Unstable fracture. M-101EN 10025 Hot rolled products of non - alloy structural steels:

Technical delivery conditions.M-101

EN 10204 Metallic products - Types of inspection documents. M-101EN 26847 Covered electrodes for manual metal are welding.

Deposition of a weld pad for chemical analysis.M-101

EN 287 Approval testing of welders - Fusion welding. M-101EN 288 Specification and qualification of welding procedures

for metallic materials.M-101

EN 444 NDT - General principles for radiographic examinationof metallic materials by X-rays and gamma rays.

M-101

EN 462 NDT - Image quality of radiographs. M-101EN 473 Qualification and certification of NDT personnel -

General principles.M-101

EN 719 Welding co-ordination - Tasks and responsibilities. M-101EN 729 Quality requirements for welding - Fusion welding of

metallic materials.M-101

EN 875 Welding - Welded joints in metallic materials -Specimen location and notch orientation for impacttests.

M-101

EN 970 Welding - Visual examination of fusion welded joint. M-101ISO 3690 Welding - Determination of hydrogen indeposited weld

metal arising from the use of covered electrodes forwelding mild and low alloy steels.

M-101

ISO 5817 (=EN 25817) Arc welded joints in steel - Guidance on quality levelsfor imperfections.

M-101

NORSOK M-001 Material selection M-101NORSOK M-120 Material data sheets for structural steel M-101NORSOK N-001 Structural design (previously N-CR-001) M-101NS 477 Welding. Rules for approval of welding inspectors. M-101prEN 1011 Welding - Recommendation for welding of metallic

materials, relevant parts.M-101

prEN 10225 Weldable structural steels for fixed offshore structures. M-101prEN 1290 NDE of welds - Magnetic particle testing of welds -

Method.M-101

prEN 1291 NDE of welds - Magnetic particle testing of welds -Acceptance levels and criteria.

M-101

prEN 1418 Welding personnel - Approval testing for fully M-101


mechanised and automatic welding.prEN 1597-1 Welding consumable - testing for classification. M-101ASME V Non-destructive testing. M-102BS 8118 Part 2, Structural use of aluminium. M-102EN 10204 Metallic products - Types of inspection documents. M-102EN 287-2 Approval testing of welders - Fusion welding. M-102EN 288-4 Specification and qualification of welding procedures


EN 444 NDT - General principles for radiographic examinationof metallic materials by X-rays and gamma rays.

M-102

EN 462 NDT - Image quality of radiographs. M-102EN 473 Qualification and certification of NDT personnel -

General principles.M-102

EN 719 Welding co-ordination - Tasks and responsibilities. M-102EN 729 Quality requirements for welding - Fusion welding of


IIW Radiographic Atlas M-102ISO 10042 Arc welded joints in aluminium and its wedable alloy

(EN 30042)M-102

NORSOK M-001 Material selection. M-102NORSOK M-121 Aluminium structural material. M-102NORSOK N-001 Structural design M-102NS 477 Welding. Rules for approval of welding inspectors. M-102prEN 1011 Recommendation for arc welding of specific

requirements for aluminium and its alloy.M-102

prEN 1289 Penetrant testing of welds - acceptance level andcriteria.

M-102

prEN 1418 Welding personnel - Approval testing for fullymechanised and automatic welding.

M-102

prEN 1597-1 Welding consumable - testing for classification. M-102prEN 970 Welding - Visual examination of fusion weded joints. M-102EN 10025 M-120EN 10210 M-120EN 10219 M-120prEN 10225 M-120BS 8118 Structural use of aluminium M-121NORSOK N-001 Structural design M-121ASTM D 1141 Specification for Substitute Ocean Water M-501ASTM D 1141 Specification for substitute ocean water. M-501ASTM D 1650 Method of sampling and testing shellac varnish. M-501ASTM D 823 Method of producing films of uniform thickness of

paint, varnish, lacquer and related products on testpanels.

M-501

ASTM G 53 Recommended practice for operating light - and water -exposure apparatus (fluorescent UV - condensationtype) for exposure of non-metallic materials.

M-501

ASTM G 8 Test method for cathodic disbanding of pipelinecoatings.

M-501

BS 5493 Code of practice for protection of iron and steelstructures against corrosion.

M-501

DIN 32521 Acceptance test and quality control for thermalspraying equipment.

M-501

DIN 8566 Zustze fr das termische Sprizen. M-501ISO 1461 Metallic coatings - Hot-dip galvanized coating on

fabricated ferrous products . Requirements.M-501

ISO 1513 Paints and varnishes - Examination and preparation M-501


samples for testing.ISO 1514 Paints and varnishes - Standard panels for testing. M-501ISO 2811 Paints and varnishes - Determination of density. M-501ISO 2812 Paints and varnishes - Determination of resistance to

liquids.M-501

ISO 2814 Paints and varnishes - Comparison of contrast ratio(hiding power) of paint of the same type and colour.

M-501

ISO 3251 Paints and varnishes - Determination of non-volatilematters of paints, vanishes and binders for pait andvanishes.

M-501

ISO 4624 Paints and varnishes - Pull-off test for adhesion. M-501ISO 4628 Paints and varnishes - Evaluation of degradation of

paint coatings - Designation of intensity, quantity andsize of common type of defects.

M-501

ISO 6270 Paints and varnishes - Determination of resistance tohumidity (continuous condensation).

M-501

ISO 7253 Paints and varnishes - Determination of resistance toneutral salt spray.

M-501

ISO 8501-1 Preparation of steel substrates before application ofpaints and related products - Visual assessment ofsurface cleanliness.

M-501

ISO 8502-3 Preparation of steel substrates before application ofpaints and related products - Test for the assessment ofsurface cleanliness - Assessment of dust on steelsurface prepared for painting, pressure sensitive tapemethod.

M-501

ISO 8502-6 Preparation of steel substrates before application ofpaints and related products - Test for the assessment ofsurface cleanliness - Sampling of soluble impurities onsurfaces to be painted - The Bresle method.

M-501

ISO 8503 Preparation of steel substrates before application ofpaints and related products - Surface roughnesscharacteristics of blast cleaned substrates.

M-501

ISO 8504-2 Preparation of steel substrates before application ofpaints and related products - Surface preparationmethods - Abrasive blast-cleaning.

M-501

NACE RP0188 Discontinuity (holiday) testing of protective coatings. M-501NORSOK M-001 Material selection M-501NORSOK S-002 Working environment (was S-DP-002) M-501NS 476 Rules for the approval of surface treatment inspectors. M-501RAL-1K Farbenbersicht. M-501SSPC Vol.2 Steel structures painting manual. M-501AWS D1.1 Structural Welding Code - Steel. M-503DNV RP B401 Cathodic Protection Design. M-503EN 10002 Metallic materials. Tensile testing. Part 1: Method of

test (at ambient temperature).M-503

EN 10204 Metallic products - Types of inspection documents. M-503EN 287 Approval testing of welders - Fusion welding - Part 1. M-503EN 288 Specification and approval of welding procedures for

metallic materials - Part 1, 2, 3.M-503

ISO 1461 Metallic coatings - Hot-dip galvanized coating onfabricated ferrous products - Requirements.

M-503

ISO 8501 Preparations of steel substrates before application ofpaints and related products - Visual assessment ofsurface cleanliness.

M-503

MIL-A-18001 disc and rod shaped M-503NACE RP0387 Metallurgical and Inspection Requirements for Cast M-503


Sacrificial Anodes for Offshore Applications.NACE RP-04-92 Metallurgical and Inspection Requirements for

Offshore Pipeline Bracelet Anodes.M-503

NORSOK M-501 Surface Preparation and Protective Coating. M-503NORSOK M-505 Standard for Corrosion Monitoring Design (presently

M-CR-505).M-503

U.S. Mil. Spec. Military Specification for Anodes, Corrosionpreventive, Zinc; slab

M-503

NORSOK M-001 Material Selection M-506ASME B 31.3 Process Piping M-601ASME II Boiler and Pressure Vessel Code,

Section II, Part C - Welding Rods, Electrodes, andFiller Metals

M-601

ASME IX Section IX - Welding and Brazing Qualification. M-601ASME V Section V - Non-destructive testing M-601ASME VIII SectionVIII - Rules for Construction of Pressure

Vessels Div. 1M-601

ASTM E 562 Practice for Determining Volume Fraction bySystematic Manual Point Count.

M-601

ASTM G 48 Standard Test Method for Pitting and CreviceCorrosion Resistance of Stainless Steel and RelatedAlloys by the use of Ferric Chloride Solution.

M-601

EN 10204 Metallic products - Types of inspection documents. M-601EN 287 Approval testing of welders - Fusion welding. M-601EN 288 Specification and approval of welding procedures for


EN 473 Qualification and certification of personnel for nondestructive examination.

M-601

EN 729 Quality requirements for welding - Fusion welding ofmetallic materials.

M-601

EN 970 Non-destructive examination of fusion welds - Visualexamination.

M-601

ISO 3690 Welding - Determination of hydrogen in depositedweld metal arising from the use of covered electrodesfor welding mild and low alloy steels.

M-601

NACE Sulphide Stress Cracking Resistant Metallic Materialsfor Oilfield

M-601

NACE MR0175 Equipment. M-601NORSOK L-CR-001 Piping and valves M-601NS 477 Rules for approval of welding inspectors M-601prEN 1418 Welding personnel - Approval testing of welding

operators for fusion welding and resistance weld settersfor fully mechanised and automatic welding of metallicmaterials.

M-601

ASTM D 3681 Standard test method for chemical resistance ofreinforced thermosetting resin pipes in a deflectedcondition.

M-CR-621

ASTM D 4024 Specification for Reinforced Thermosetting Resin(RTR) Flanges.

M-CR-621

BS 5480 Specification for Glass Fibre Reinforced (GRP) pipes,joints and fittings for use for water supply andsewerage.

M-CR-621

DIN 16966 Glass fibre reinforced polyester resin (UP-GF) pipefittings and joint assemblies.

M-CR-621

ISO 4901 Reinforced plastics based on unsaturated polyesterresins-Determination of residual styrene monomercontent.

M-CR-621


KRV A 984/82-02 Instructions for design and installation of piping madeof glassfibre reinforced thermosetting resins, with andwithout liner.

M-CR-621

NORSOK M-CR-630 Material Data Sheets for Piping M-CR-621OLF document Installasjon av komposittrr offshore - Godkjenning av

montrer og installasjonsledere (Approval of PipeFitters and Supervisors), OLF - 1994 (DRAFT).

M-CR-621

OLF document Installasjon av komposittrr offshore - Godkjenning avispektrer (Approval of Inspectors), OLF - 1994(DRAFT).

M-CR-621

UKOOA document Specifications and Recommended Practice for the Useof Glass Fibre Reinforced Plastic Piping Offshore,1994

M-CR-621

API 5L M-630API 6A 60K M-630ASTM A 105 M-630ASTM A 106 M-630ASTM A 182 M-630ASTM A 216 M-630ASTM A 234 M-630ASTM A 240 M-630ASTM A 240 M-630ASTM A 269 M-630ASTM A 276 M-630ASTM A 312 M-630ASTM A 333 M-630ASTM A 350 M-630ASTM A 351 M-630ASTM A 352 M-630ASTM A 358 M-630ASTM A 403 M-630ASTM A 420 M-630ASTM A 487 M-630ASTM A 487 M-630ASTM A 516 M-630ASTM A 519 M-630ASTM A 671 M-630ASTM A 672 M-630ASTM A 694 M-630ASTM A 788 M-630ASTM A 789 M-630ASTM A 790 M-630ASTM A 815 M-630ASTM A 860 M-630ASTM A 890 M-630ASTM A 928 M-630ASTM B 148 M-630ASTM B 151 M-630ASTM B 171 M-630ASTM B 265 M-630ASTM B 338 M-630ASTM B 348 M-630ASTM B 363 M-630ASTM B 366 M-630ASTM B 367 M-630ASTM B 381 M-630


ASTM B 443 M-630ASTM B 444 M-630ASTM B 446 M-630ASTM B 466 M-630ASTM B 467 M-630ASTM B 494 M-630ASTM B 564 M-630ASTM B 705 M-630ASTM B 861 M-630ASTM B 862 M-630UK00A M-630ISO 10423 Appendix H: Recommended Practice for Heat Treating

Equipment Qualification (based on API Spec 6A)M-650

ASTM A703 Steel Castings, General Requirements, for Pressure-Containing Parts

M-650

ISO 9002 Quality Systems - Model for Quality Assurance inProduction, Installation and Servicing.

M-650

API RP 7G Recommended practice for drill stem design andoperating limits. (Will be replaced by ISO 10407,Drilling and production equipment - Drill stem designand operating limits, tentatively to be issued as DraftInternational Standard (DIS) October 1997.)

M-CR-701

ASME IX Section IX - Welding and Brazing Qualification M-CR-701ASME V Boiler and Pressure Vessel Code, Section V - Non-

destructive testingM-CR-701

ASME VIII Section VIII - Rules for Control of Pressure VesselsDiv. 1

M-CR-701

ASTM A 370 Mechanical Testing of Steel Products M-CR-701ASTM A 388 Practice for Ultrasonic Examination of Heavy Steel

ForgingsM-CR-701

EN 10204 Metallic Products-Types of Inspection Documents M-CR-701EN 288 Specification and Approval of Welding Procedures for

Metallic MaterialsM-CR-701

ISO 11960 - Specification for Casing and Tubing. (Replaced APISpec. 5CT).

M-CR-701

ISO Guide 25 Guidelines for Assessing the TechnicalCompetence of Testing Laboratories

M-CR-701

ISO/DIS 11961 Steel pipes for use as drill pipe. Specification.(Replaces API 5D).

M-CR-701

NACE MR-01-75 Material Requirements. Sulphide Stress CrackingResistantMetallic Material for Oil Field Equipment

M-CR-701

NORSOK M-DP-001 Design Principles, Material Selection M-CR-701ISO 11961 Steel pipes for use as drill pipe. Specification.

(Replaces API Spec 5D)M-CR-701

ISO 10407 Petroleum and natural gas industries M-702API Spec. 7 Specification for Rotary Drill Stem Equipment M-702ASTM E 45 Inclusion Control M-702EN 287 Approval testing of welders. M-702EN 288-3 Specification and qualification of welding procedures


EN 10204 Metallic products Types of inspection documents. M-702EFC Doc. No. O&G-93-2 Guidance on materials requirements for corrosion

resistant alloys exposed to H2S in oil and gasproduction

M-CR-703

EFC Publ. No. 16A Working party report on Guidelines on materialrequirements for carbon and low-alloy steels for H2S -

M-CR-703


Containing environments in oil and gas production.ISO 11960 Material for petroleum and natural gas industries steel

pipe for use as casing or tubing for wellsM-CR-703

ISO/WD 13680 Material for petroleum and natural gas industries -Corrosion resistant alloy seamless tubes for casing,tubing and coupling stock - Part 1: Technical deliveryconditions.

M-CR-703

NACE MR-01-75 Sulphide stress cracking resistant metallic materials foroilfield equipment

M-CR-703

NACE TM-01-77 Laboratory testing of metals for resistance to sulphidestress cracking in H2S environment

M-CR-703

ASTM D 1043 Test Method for Stiffness Properties of Plastics as aFunction of Temperature by means of a Torsion Test.

M-CR-710

ASTM D 1141 Specification for substitute ocean water. M-CR-710ASTM D 1414 Methods of Testing Rubber O-rings M-CR-710ASTM D 1525 Test Method for Vicat Softening Point for Plastics. M-CR-710ASTM D 2240 Test Method for Rubber Property - Durometer

HardnessM-CR-710

ASTM D 2990 Test Methods for Tensile, Compressive and FlexuralCreep and Creep Rupture Test of Plastics.

M-CR-710

ASTM D 3032 Method of Testing Hook-up Wire Insulation) M-CR-710ASTM D 395 Test Method for Rubber Property - Compression Set

(method B).M-CR-710

ASTM D 412 Test Method for Rubber Properties in Tension. M-CR-710ASTM D 638 Test Method for Tensile Properties of Plastics. M-CR-710ASTM D 695 Test Method for Compressive Properties of Rigid

Plastics.M-CR-710

ASTM D 746 Test Method for Brittleness Temperature of Plasticsand Elastomer by Impact.

M-CR-710

ASTM D 790 Test method for Flexural Properties of Unreinforcedand Reinforced Plastics and Electrical InsulatingMaterials.

M-CR-710

ASTM D 792 Test Methods for Specific Gravity and Density ofPlastics by Displacement.

M-CR-710

BS 1806 Standard Inch Size of O-rings M-CR-710DIN 53453 Testing of Plastics, Impact Flexural Test. M-CR-710ISO 1133 Plastics - Determination of Melt Flow Rate of

Thermoplastics.M-CR-710

ISO 1432 Rubber vulcanised - low temperature stiffening(Gehman test)

M-CR-710

ISO 1817 Vulcanised rubbers - Resistance to liquids - methods oftests

M-CR-710

ISO 868 Determination of Indentation Hardness by Means of aDurometer (Shore hardness).

M-CR-710

ISO D 34 Tear resistance, method A M-CR-710ISO R 812 Method of test for temperature limit of brittleness for

vulcanised rubberM-CR-710

API RP 2A Recommended practice for planning, designing andconstructing fixed offshore platforms.

N-001

API RP 2N Recommended practice for planning, designing andconstructing fixed offshore structures in iceenvironments.

N-001

API RP 2SK Recommended practice for design and analysis ofstation keeping systems for floating structures.

N-001

API RP 2T Recommended practice for planning, designing andconstructing tension leg platforms.

N-001

BSI BS 8100 Lattice towers and masts, Part 1. N-001


BSI BS 8118 Structural use of Aluminium, Part 1, Code practice forthe design of Al-structures.

N-001

DIN 4131 Antennentragwerke aus stahl N-001DIN 4133 Schorsteine aus stahl. N-001DNV Rules for Classification of fixed offshore installations. N-001DNV Rules for Classification of mobile offshore units. N-001DNV Rules for Classification of ships. N-001DNV Classification note no. 30.1 Buckling strength

analysis.N-001

DNV Classification note no. 30.2 Fatigue strength analysisfor mobile offshore units.

N-001

DNV Classification note no. 30.5 Environmental conditionsand environmental loads.

N-001

DNV Veritas Marine Operations, Standard for insurancewarranty surveys in marine operations.

N-001

EN 485 Aluminium and aluminium alloys - Sheet, strip andplate.

N-001

EN 755 Aluminium and aluminium alloys - Extruded rod/bar,tube and profiles.

N-001

IMO Code for the construction and equipment of Mobiloffshore drilling units (MODU CODE)

N-001

ISO 13819-1 Offshore structures Part 1: General requirements. N-001NMD Regulations of 4 September 1987 No. 856 concerning

construction of mobile offshore units (issued withamendments 1997)

N-001

NMD Regulations of 4 September 1987 No. 857 concerninganchoring/positioning on mobile offshore units (issuedwith amendments 1997)

N-001

NMD Regulations of 20 December 1991 No. 878 concerningstability, watertight subdivision andwatertight/weathertight closing means on mobileoffshore units

N-001

NMD Regulations of 20 December 1991 No. 879 concerningballast systems on mobile offshore units

N-001

NMD Regulations of 10 February 1994 No. 123 for mobileoffshore units with production plants and equipment

N-001

NMD Regulations of 1 April 1996 No. 320 concerningcertificates of competency and qualificationrequirements for the manning of mobile offshore units

N-001

NORSOK G-CR-001 Soil investigation (next revision will be renumbered G-001)

N-001

NORSOK J-003 Marine operations N-001NORSOK M-001 Materials selection N-001NORSOK M-101 Structural steel fabrication N-001NORSOK M-102 Structural aluminium fabrication N-001NORSOK M-120 Material data sheets for structural steel N-001NORSOK M-121 Aluminium structural materials N-001NORSOK M-501 Surface preparation and protective coating N-001NORSOK M-503 Cathodic protection N-001NORSOK M-CR-505 Corrosion monitoring design (will be renumbered M-

505)N-001

NORSOK N-002 Collection of metocean data N-001NORSOK N-005 Condition monitoring of load bearing structures (will

be issued shortly)N-001

NORSOK S-001 Technical safety (presently numbered S-DP-001) N-001NORSOK U-CR-001 Subsea structures and piping systems (will be

renumbered U-002)N-001


NORSOK Z-001 Documentation for operation (DFO - presentlynumbered Z-CR-001)

N-001

NPD Regulations relating to load bearing structures in thepetroleum activities.

N-001

NPD Regulations relating to implementation and use of riskanalysis in the petroleum activities.

N-001

NPD Guidelines to regulations relating to load bearingstructures

N-001

NPD Guidelines concerning loads and load effects N-001NPD Guidelines on design and analysis of steel structures N-001NPD Guidelines to Regulations relating to systematic follow-

up of the working environment in the petroleumactivities

N-001

NS 2128 Weights engineering, Terminology. N-001NS 2129 Weights engineering, Requirements for weight reports. N-001NS 2130 Weights engineering, Specification for weighing of

major assemblies.N-001

NS 2131 Weights engineering, Specification for weight datafrom suppliers and weighing of bulk and equipment.

N-001

NS 3420 Descriptions for construction and building N-001NS 3472 Steel structures. Design rules. N-001NS 3473 Concrete structures, Design rules. N-001NS 3481 Soil investigation and geotechnical design for marine

structures.N-001

DNMI Report 18/97 KLIMA. Recommended format(NORSOK) for the delivery of metocean data.

N-002

Luftfartsverket: Forskrift om kontinentalsokkelflyging - Ervervsmessigluftfart til og fra helikopterdekk p faste og flyttbareinnretninger til havs. Bestemmelser for sivil luftfart.BSL D 5-1, Oslo.

N-002

NORSOK T-SR-100 Telecom subsystems N-002NPD Regulations relating to the collection of environmental

data in the petroleum activities.N-002

VMO, 1995: Technical Regulations. Manual on Codes, Volume I.1,WMO-No.306, Geneva.

N-002

VMO, 1996: Guide to meteorological Instruments and Methods ofObservation, WMO-No. 008, Geneva.

N-002

VMO/ICAO, 1996: Guide to the Provision of Meteorological Service forInternational Helicopter Operations. WMO-No. 842,Geneva

N-002

NORSOK J-003 Marine operations N-003NORSOK N-004 Steel structures N-003ISO 2103 Actions due to use and occupancy in residential and

public buildings, 1986. (E)N-003

ISO 13819-1 Offshore structures Part 1: General requirements N-003ISO 13819-2 Fixed Steel Structures N-003ISO TR 13637 Mooring of Mobile Offshore Drilling Units (Also API

RP 2SK)N-003

NS 3479 Prosjektering av bygningskonstruksjoner,dimensjonerende laster (Design of Structures, Designloads). Norges Byggstandardiseringsrd (NorwegianCouncil for Building Standardization), Oslo

N-003

NS 2131 Weights engineering, Specification for weight datafrom suppliers and weighing of bulk and equipment

N-003

DIN-4133 Schornsteine aus Stahl, Berlin (March 1988) N-003NPD Regulations relating to loadbearing structures in the

petroleum activitiesN-003


NPD Regulations relating to implementation and use of riskanalysis in the petroleum activities

N-003

NPD Guidelines to regulations relating to loadbearingstructures

N-003

NPD Guidelines concerning loads and load effects N-003NMD Regulations of 4 September 1987 No. 857 concerning

anchoring/positioning on mobile offshore units (issuedwith amendments 1997)

N-003

NMD Regulations of 20 December 1991 No. 878 concerningstability, watertight subdivision andwatertight/weathertight closing means on mobileoffshore units.

N-003

NMD Regulations of 10 February 1994 No. 123 for mobileoffshore units with production plants and equipment.

N-003

ENV 1991-2-2:1995 Eurocode 1: Part 2-2: Actions on structures exposed tofire

N-003

IMO Code for the construction and equipment of mobileoffshore drilling units. (MODU CODE)

N-003

DNV Rules for classification of ships N-004DNV Rules for planning and executions of marine

operations.N-004

ISO 13819-1 Offshore structures part 1: General requirements. N-004ISO 3010 Basis for design of structures - seismic action of

structures.N-004

NPD Regulations relating to loadbearing structures in thepetroleum activities.

N-004

NS 3472 Steel structures. Design rules N-004NS 3481 Soil investigation and geotechnical design for marine

structures.N-004

NS 2128 Weights engineering, terminology. N-004NS 2129 Weights engineering, requirements for weight reports. N-004NS 2130 Weights engineering, specification for weighing of

major assemblies.N-004

NS 2131 Weights engineering, specification for weight data fromsuppliers and weighing of bulk and equipment.

N-004

NS-ENV 1993 1-1 Eurocode 3: Design of steel structures part 1-1: Generalrules and rules for buildings

N-004

EN 473 Qualification and certification and certification andcertification of NDT personnel - General principles

N-005

ISO 13819-1 Offshore structures part 1: General requirements N-005NORSOK N-001 Structural design N-005NORSOK N-002 Collection of metocean data N-005NORSOK Z-001 Documentation for operation (DFO) N-005NORSOK O-DP-001 Operation principles. O-CR-001ISO/WD 14224 Petroleum and natural gas industries - Collection of

reliability and maintenance data for equipment,ISO/TC 67 4 N5 Rev. 4 (June 1995)

O-CR-002

NORSOK O-CR-001 Life cycle cost for systems and equipment O-CR-002NORSOK O-DP-001 Operation principles. O-CR-002ANSI/ASME B31.3 Process Piping P-001API RP 14C Analysis, Design, Installation and Testing of Basic

Surface Safety Systems on Offshore ProductionPlatforms. (New revision of ISO 10418 to be used,when issued in 2000).

P-001

API RP 520 Sizing, Selection and Installation of Pressure -Relieving Systems in Refineries

P-001

API RP 521 Guide for Pressure - Relieving and Depressuring P-001


Systems.BS MA 18 Salt water piping systems in ships P-001DIN 3381 Safety devices for gas supply installations operation at

working pressures up to 100 bar; pressure reliefgovernors and safety shut-off devices

P-001

IEC 61508 Functional safety of electrical/electronic/programmableelectronic safety related systems.

P-001

NORSOK L-CR-001 Piping and valves (will be renumbered L-001) P-001NORSOK R-CR-004 Piping and equipment insulation (will be renumbered

R-004)P-001

NORSOK S-DP-001 Technical safety (Will be renumbered S-001) P-001NORSOK S-002 Working environment P-001API 2000 Venting Atmospheric and Low-Pressure Storage Tanks P-100API RP 520 Design and installation of pressure relieving systems in

refineries.P-100

API RP 521 Guide for pressure relieving and depressuring systems. P-100ISO 10418 Analysis, design, installation and testing of basic safety.

Systems for offshore production platforms (mainlybased on API RP 14C)

P-100

NAS 1638 Cleanliness requirements of parts used in hydraulicsystems. National Aerospace Standard, 1964.

P-100

NORSOK O-CR-001 Life cycle cost for systems and equipment (O-001) P-100NORSOK P-001 Process design P-100NORSOK S-DP-001 Technical safety (S-001) P-100NORSOK S-DP-002 Working environment (S-002) P-100NORSOK S-DP-003 Environmental Care (S-003) P-100NORSOK Z-DP-002 Coding system (Z-002) P-100ANSI B1.020 Pipe Threads. R-001ANSI B16.5 Steel Pipe Flanges and Flanged Fittings. R-001ANSI/ASME B31.3 Process Piping. R-001API 610 Centrifugal Pumps for General Refinery Service.

(Replace with ISO 13709 when issued)R-001

API 613 Special Purpose Gear Units for Refinery Service(Replace with ISO 13711 when issued).

R-001

API 614 Lubrication, Shaft Sealing and Control - Oil Systemsfor Special Purpose Applications. (Replace with ISO10438 when issued)

R-001

API 616 Gas Tubines for Refinery Services. R-001API 617 Centrifugal Compressors for General Refinery Service.

(Replace with ISO 10439 when issued)R-001

API 617 Centrifugal Compressors for General Refinery Service(Replace with ISO 10439 when issued).

R-001

API 618 Reciprocating Compressors for Petroleum, Chemicaland Gas Industry Services (Replace with ISO 13707when issued).

R-001

API 650 Welded Steel Tanks for Oil Storage. R-001API 670 Non-contacting Vibration and Axial Position

Monitoring System.R-001

API 674 Positive Displacement Pumps Reciprocating. (Replacewith ISO 13710 when issued)

R-001

API 675 Positive Displacement Pumps Controlled Volume. R-001API 676 Positive Displacement Pumps Rotary. R-001API 678 Accelerometer Based Vibration Monitoring System. R-001ASME PTC 10 Power Test Code - Compressors and Exhausters. R-001ASME PTC 22 Performance Test Code - Gas Turbine Power Plants. R-001ASME VIII Boiler and Pressure Vessel Code. R-001


BS 2654 Specification for manufacture of vertical steel weldednon-refrigerated storage tanks with butt-welded shellsfor the petroleum industry.

R-001

BS 5500 Unfired Fusion Welded Pressure Vessel Code. R-001DBE regulations Forskrifter om kjelanlegg med veiledninger

(Regulations for boiler plants and guidelines).R-001

DIN 1055 Lasted in silozellen R-001DIN 1942 Abnahmeversuche an Dampferzeugern. R-001DNV Rules for Classification of Steel Ships. R-001IEC Publication No. 45. R-001INSTA 121 Acoustics - Determination of Sound Power Level of

Noise Sources Using Sound Intensity Measurement,Scanning Method for Use in Situ.

R-001

ISO 10437 Special Purpose Steam Turbines for Refinery Services. R-001ISO 1363 Package Gas Turbines (in development). R-001ISO 1940 Mechanical Vibration - Balance Quality Requirements

of Rigid Rotors.R-001

ISO 262 General Purpose Metric Screw Threads. R-001ISO 2954 Mechanical Vibration of Rotating and Reciprocating

Machines.R-001

ISO 3046 Reciprocating Internal Combustion Engines -Performance.

R-001

ISO 3945 Mechanical Vibration of Large Rotating Machines. R-001ISO 4406 Hydraulic fluid power Fluids, Method for coding of

contamination by solid particles.R-001

ISO 5730 Stationary shell boilers of welded construction. R-001ISO 9614 - 2 Acoustics - Determination of Sound Power Level of

Noise Sources Using Sound Intensity, Part 2:Measurement by Scanning.

R-001

MSS SP 44 Steel Pipeline Flanges R-001NAS 1638 National Aerospace Standard. Cleanliness required of

parts used in hydraulic systems.R-001

NEMA SM 23 Steam Turbines for mechanical drive service. R-001NFPA 20 Centrifugal Fire Pumps. R-001NS 1544 Vertical cylindical steel tanks for storage of flammable

A, B and C liquids at initial pressure approximatelyatmospheric pressure.

R-001

NS 3472 Structural Steel - Design Rules. R-001NS 3472 Structural Steel - Design Rules. R-001TBK 1 - 2 Norwegian Pressure Vessel Code. R-001TEMA Standards of Tubular Exchanger Manufacturers

Association.R-001

TRD 611 Speisewasser und Kesselwasser von Dampferzeugernder Gruppe IV.

R-001

DNV CN 2.7.1 Offshore Freight Containers - Design and Certification R-003DNV CN 2.7.2 Offshore Service Containers - Design and Certification R-003EN 1050 Safety of Machinery - Risk Assessment. R-003EN 818-1 Short Link Chain for Lifting Purposes - Safety Part 1:

General Conditions of AcceptanceR-003

EN 818-2 Short Link Chain For Lifting Purposes - Safety Part 2:Medium Tolerance Chain for Chain Sling - Grade 8

R-003

FF-T-79-B Turnbuckles R-003ILO 152 Convention concerning Occupational Safety R-003ISO 10245-1 Cranes - Limiting and Indicating Devices - General R-003ISO 2408 Steel Wire Ropes for general Purposes. R-003ISO 4302 Cranes - Wind Load Assessment R-003


ISO 4309 Wire Ropes - Code of Practice for Examination andDiscard

R-003

ISO 4310 Cranes - Test Code and Procedures R-003ISO 7531 Wire Rope Slings for general Purposes - Characteristics

and Specifications.R-003

ISO 7752-1 Lifting Appliances - Controls - Layout - Characteristics- General

R-003

ISO 7752-4 Cranes - Controls - Layout and Characteristics - Part 4:Jib Cranes.

R-003

ISO 8566-1 Cranes - Cabins - Part1: General R-003ISO 8566-5 Cranes Cabins - Part 5: Overhead Travelling Cranes R-003ISO 8792 Wire Rope Sling - Safety Criteria and Inspection

Procedures for Use.R-003

ISO 8793 Steel Wire Ropes - Ferrule secured Eye Terminations. R-003ISO 9926-1 Training of Drivers. Part 1 - General R-003ISO 9942-1 Cranes - Information Labels - General R-003ISO/DIS 12482-1 Condition Monitoring - General R-003ISO/DIS 1461 Hot dip galvanised Coatings on Fabricated Ferrous

Products.R-003

ISO/DIS 99277-1 Cranes Inspection - General R-003NORSOK R-002 Lifting Equipment R-003NS-1850 Eyebolts R-003NS-1851 Eyenuts R-003NS-EN 292-1 Safety Of Machinery - Basic Concepts - General

Principles for Design Part 1R-003

NS-EN 292-2 Safety Of Machinery - Basic Concepts - GeneralPrinciples for Design Part 2

R-003

NS-EN 354 Lanyards R-003NS-EN 358 Working Positioning System R-003NS-EN 360 Retractable type Fall Arresters R-003NS-EN 361 Full Body Harness R-003NS-EN 365 General Requirements for Instruction for Use and

MarkingR-003

NS-EN 813 Sit harness R-003OLF 022 Recommended Guidelines for Safety Requirements of

Hired EquipmentR-003

Order no. 522 The Supply of Machinery (Safety) Regulations R-003Order no. 523 Design of Protective Equipment R-003Order no. 524 Minimum Health and Safety Requirements for the Use

by Workers of Protective Equipment at the WorkplaceR-003

PR-C-271 C Shackles. Type IV, Class 6 R-003prEN 12195-1 Load Restraint Assemblies - Safety - Calculation of

ForcesR-003

prEN 12195-2 Load Restraomt Assemblies - Safety - Web LashingEquipment made of Man-made Fibres

R-003

prEN 12937 Safety Of Machinery - Technical Principles andSpecifications for Mobility and for Load Lifting.

R-003

prEN 1492-1 Textile slings - Safety - Part 1: Specification for flatwoven Webbing-slings made of Man-made fibres.

R-003

prEN 1492-2 Textile slings - Safety - Part 1: Specification forRound-slings made of Man-made Fibres.

R-003

prEN 1677-1 Components for Slings - Safety. Forged SteelComponents, Grade 8.

R-003

prEN 818-4 Short Link Chain for Lifting Purposes - Safety Part 4:Chain Slings - Grade 8

R-003

prEN 818-6 Short Link Chain for Lifting Purposes - Safety Part 6: R-003


Chain Slings instruction for Use And Maintenance.prEN 818-7 Short Link Chain for Lifting purposes - Safety Part 7:

Fine Tolerance Chain for Serial Hoists, Grade T. TypesT, DT, DAT)

R-003

YA-003 Regulations relating to systematic follow - up of theWorking Environment in the Petroleum Activities

R-003

Direktoratet forarbeidstilsynet

Forskrift 522, MaskinerForskrift 523, Konstruksjo, utroming og produksjon avpersonlig verneutstyrForskrift 524, Bruk av personlig verneutstyr parbeidsplassen

R-003N

Oljedirektoratet YA-003, Forskrifter vedrrende systematisk oppflgingav arbeidsmiljet i petroleumsvirksomheten

R-003N

EN 818-1 Short Link Chain for Lifting Purposes Safety Part 1:General Conditions of Acceptance

R-003N

EN 818-2 Short Link chain For Lifting Purposes Safety Part 2:Medium Tolerance Chain for Chain Sling Grade 8

R-003N

prEN 818-4 Short Link Chain for Lifting Purposes Safety Part 4:Chain Slings Grade 8

R-003N

prEN 818-6 Short Link Chain for Lifting Purposes Safety Part 6:Chain Slings instruction for Use And Maintenance.

R-003N

prEN 818-7 Short Link Chain for Lifting Purposes Safety Part 7:Fine Tolerance Chain for Serial Hoists, Grade T. TypesT, DT, DAT)

R-003N

prEN 1677-1 Components for Slings Safety. Forged SteelComponents, Grade 8.

R-003N

prEN 12195-1 Load Restraint Assemblies Safety Calculation ofForces

R-003N

prEN 12195-2 Load Restraint Assemblies Safety Web LashingEquipment made of Man-made Fibres

R-003N

prEN 1492-1 Textile slings Safety Part 1: Specification for flatwoven Webbing - slings made of Man-made fibres

R-003N

prEN 1492-2 Textile slings Safety Part 1: Specification forRound-slings made of Man-made Fibres.

R-003N

prEN 12937 Safety Of Machinery Technical Principles andSpecifications for Mobility and for Load Lifting.

R-003N

EN 1050 Safety of Machinery Risk Assessment R-003NISO 7752-4 Cranes Controls Layout and Characteristics Part

4: Jib CranesR-003N

ISO 4302 Cranes Wind Load Assessment R-003NISO 8566-1 Cranes Cabins Part 1: General R-003NISO 8566-5 Cranes Cabins Part 5: Overhead Travelling Cranes R-003NISO 7752-1 Lifting Appliances Controls Layout

Characteristics GeneralR-003N

ISO 10245-1 Cranes Limiting and Indicating Devices General R-003NISO 9942-1 Cranes Information Labels General R-003NISO 4310 Cranes Test Code and Procedures R-003NISO 4309 Wire Ropes Code of Practice for Examination and

DiscardR-003N

ISO/DIS 1461 Hot dip galvanised Coatings on Fabricated FerrousProducts

R-003N

ISO 7531 Wire Rope Slings for general Purposes Characteristics and Specifications.

R-003N

ISO 2408 Steel Wire Ropes for general Purposes. R-003NISO 8792 Wire Rope Sling Safety Criteria and Inspection

Procedures for Use.R-003N

ISO 8793 Steel Wire Ropes Ferrule secured Eye Terminations. R-003N


ISO/DIS 12482-1 Condition Monitoring General R-003NISO/DIS 99277-1 Cranes Inspection General R-003NISO 9926-1 Training of Drivers. Part 1 General R-003NNS-EN 354 Forbindelseslinjer (Taljerep) R-003NNS-EN 358 Stttebeltesystemer R-003NNS-EN 360 Selvstrammende fanganordninger R-003NNS-EN 361 Kroppsseler R-003NNS-EN 365 Generelle krav til bruksanvisning og merking R-003NNS-EN 813 Sitteseler (Ridebelte) R-003NNS-1850 yebolter R-003NNS-1851 yemuttere R-003NNS-EN 292-1 Maskiners sikkerhet basis konsepter Generelle

prinsipper for konstruksjon, del 1R-003N

NS-EN 292-2 Maskiner sikkerhet basis konsepter Generelleprinsipper for konstruksjon, del 2

R-003N

NORSOK R-002 Lifting Equipment R-003NDNV CN 2.7-1 Offshore Freight containers Design and Certification R-003NDNV CN 2.7-2 Offshore Service Containers Design and Certification R-003NUS-RR-C-271 C Shackles. Type IV, Class 6 R-003NUS-FF-T-79-B Turnbuckles R-003NOLF 022 Anbefalte retningslinjer for sikkerhetskrav til innleid

utstyrR-003N

ILO 152 Convention concerning Occupational Safety. R-003NAPI 11P Specification for Packaged Reciprocating Compressors

for Oil and Gas Production Services.R-100

API 610 Centrifugal Pumps for General Refinery Services.(Replace with ISO 13709 when issued)

R-100

API 616 Type H Industrial Combustion Gas Turbines forRefinery Services. (Replace with ISO 3977 whenissued)

R-100

API 617 Centrifugal Compressors for General Refinery Services(Replace with ISO 13711 when issued)

R-100

API 619 Rotary - type Positive Displacement Compressors forGeneral Refinery Service. (Replace with ISO 10440when issued).

R-100

ASME VIII Boiler and Pressure Vessel Code, section VIII division1 & 2.

R-100

BS 5500 Unfired Fusion Welded Pressure Vessels. R-100Hydraulic Institute Standards for centrifugal, rotary & reciprocating

pumps.R-100

NFPA 20 Firewater Pumps. R-100TBK 1 & 2 General Rules For Pressure Vessels. R-100TEMA Class R Tubular Exchanger Manufacturing Association. R-100DNV CN 2.7.1 Offshore Freight Containers - Design and Certification R-CR-002DNV CN 2.7.2 Offshore Service Containers - Design and Certification R-CR-002DNV Lifting Appliances DNV Rules for Certification of Lifting Appliances,

1989.R-CR-002

EN 10204 Material documentation R-CR-002EN 1050 Safety of machinery - Risk assessment R-CR-002EN 1070 Safety of machinery - Terminology R-CR-002EN 292 Safety of machinery - Basic concepts, general

principles of design - Part 1: Basic terminology,methodology. Part 2: Technical principles andspecifications.

R-CR-002

EN 418 Safety of machinery - Emergency stop equipment -functional aspects - principle of design.

R-CR-002


EN 818 Short Link Chain for Lifting Purposes - Safety - Part 1:General Conditions of Acceptance. Part 2: MediumTolerance Chain Slings - Grade 8.

R-CR-002

EN 818-8 Short Link Chain for Lifting Purposes - Safety - Part 1;General Conditions of Acceptance.

R-CR-002

EN 983 Safety of machinery - Safety requirements for fluidpower systems and components - Pneumatics.

R-CR-002

FEM, SEC. 1 Heavy Lifting and Handling Equipment. R-CR-002FEM, SEC. 9 Series Lifting Equipment. R-CR-002ISO 1461 Hot dip galvanised coatings on fabricated ferrous

products.R-CR-002

ISO 2408 Steel Wire Ropes for General Purposes -Characteristics.

R-CR-002

ISO 7531 Wire Rope Slings for General purposes -Characteristics and Specification.

R-CR-002

ISO 7752-4 Cranes - Controls - Layout and characteristics - Part 4jib cranes.

R-CR-002

NORSOK E-CR-001 Electrical Systems R-CR-002NORSOK M-CR-101 Structural Steel Fabrication R-CR-002NORSOK M-CR-120 Material data sheets for Structural steel R-CR-002NORSOK M-CR-501 Surface Preparation and Protective Coating R-CR-002NORSOK M-CR-630 Material Data Sheet R-CR-002NORSOK M-DP-001 Material Selection R-CR-002NORSOK R-CR-001 Mechanical equipment R-CR-002NORSOK S-DP-001 Technical Safety R-CR-002NORSOK S-DP-002 Working Environment R-CR-002NORSOK S-DP-003 Environmental Care R-CR-002NORSOK Z-CR-001 Documentation for Operation R-CR-002prEN 292-3 Safety of machinery - Basic concepts - General

principles for design - Part 3: Additional technicalprinciples and specifications for mobility and for loadlifting.

R-CR-002

prEN 818-4 Short link chain for lifting purposes - Safety. R-CR-002prEN 953 Safety of machinery - General requirements for the

design and construction of guards (fixed, movable)R-CR-002

prEN 954 Safety of machinery - Safety related parts of controlsystem - Part 1 General principles for design

R-CR-002

prEN 982 Safety requirements for fluid power system andcomponents - Hydraulics.

R-CR-002

API RP 521 Guide for Pressure Relieving and De-pressuringSystems

R-004

ASTM-C552 Cellular Glass Block and Pipe Thermal Insulation. R-004ASTM-C592 Mineral Fibre Blanket Insulation and Blanket Type

Pipe insulationR-004

ASTM-C303 Test method for Density of Pre formed Block-TypeThermal Insulation

R-004

ASTM-C177 Test method for Steady-State Heat Flux Measurement R-004ASTM-165 Test Method for Measuring Compressive Properties of

Thermal InsulationR-004

ASTM-D3833 Test Method for Water Vapour Transmission of Tapes R-004ASTM-G53 Practise for Operating Light- and Water-Exposure of

Non metallic materialsR-004

EN 253: 1994 Pre-insulated bonded pipe systems for underground hotwater networks

R-004

IMO Resolution A.653 (16) Recommendations on Improved Fire Testprocedures for Surface Flammability of Bulkhead,Ceiling and Deck Finish Materials

R-004


ISO 834 Fire resistance tests Elements of buildingconstructions

R-004

ISO 5660 Fire tests Reaction to Fire Rate of Heat Releasefrom Building Products

R-004

NORSOK S-002 Working Environment R-004NORSOK M-501 Surface Preparation and Protective Coating R-004NT Fire 036 Pipe Insulation: Fire spread and smoke production

Full scale testR-004

OTO 93028 Jet fire Test R-004API 6FA Fire tests for valves S-001API RP 521 Guide for pressure-relieving and depressuring systems S-001BS 6755 Testing of valves. specification for fire type-testing

requirementsS-001

E&P Forum Guidelines for the Development and Application ofHSE Management System.

S-001

ICAO BSL 5-1 International Civil Aviation Organisation.Bestemmelser for Sivil Luftfart 5-1, Forskrift omkontinentalsokkelflygning ervervsmessig luftfart tilog fra helikopterdekk p faste og flyttbare innretningertil havs.

S-001

IEC 60079-10 Electric apparatus for explosive gas atmosphere- Part10 Classification of hazardous areas.

S-001

IEC 60079-13 Electric apparatus for explosive gas atmosphere- Part13 Construction and use of rooms or buildingsprotected by pressurisation.

S-001

IEC 61892-7 Mobile and fixed offshore units- Electricalinstallations. Part 7 area classification

S-001

IMO Resolution A653 Flame spread, surface materials and floorings S-001ISO 10418 Analysis, design, installation and testing of basic

surface safety systems for offshore productionplatforms. (Replaces API RP14 C)

S-001

ISO 13702 Petroleum and natural gas industries Offshoreproduction installations- Control and mitigation of firesand explosions Requirements and guidelines

S-001

ISO 5660 Fire tests Reaction to fire Rate of heat release frombuilding products.

S-001

NFPA 11A National Fire Protection Association part 11 Standardfor medium- and high-expansion foam systems

S-001

NFPA 13 National Fire Protection Association part 13Installation of sprinkler systems

S-001

NFPA 14 National Fire Protection Association part 14 Standardfor the Installation of Standpipe and Hose Systems

S-001

NFPA 16 National Fire Protection Association part 16 DelugeFoam- Water Sprinkler Systems and Foam- WaterSpray Systems

S-001

NFPA 20 Standard for the Installation of Centrifugal Fire Pumps S-001NFPA 72 National Fire Protection Association part 72 National

Fire Alarm CodeS-001

NORSOK C-001 Living quarters area S-001NORSOK C-002 Architectural components and equipment S-001NORSOK H-001 HVAC (Heating, ventilation and air conditioning) S-001NORSOK I-CR-002 Safety and Automation Systems (SAS) S-001NORSOK L-002 Piping Design, Layout and Stress Analysis S-001NORSOK M-501 Surface Preparation and Protective Coating S-001NORSOK P-001 Process Design S-001NORSOK S-002 Working Environment S-001NORSOK S-003 Environmental Care S-001


NORSOK S-011 Safety equipment data sheets S-001NORSOK T-100 Telecom Subsystems S-001NORSOK Z-013 Risk and emergency preparedness analysis. S-001NORSOK Z-016 Regularity, management & reliability technology S-001DIN VDE 0848, Part 4 Safety at electro magnetic fields. S-002EN 1050 Safety of machinery - Risk assessment. S-002EN 292 Safety of machinery - Basic concepts, general

principles for design, Part 1 and 2.S-002

EN 294 Safety of machinery - Safety distances to preventdanger zones to be reached by upper limbs.

S-002

EN 349 Safety of machinery - Minimum gaps to avoid crushingof parts of the human body.

S-002

EN 547 Safety of machinery - Human body dimensions. S-002EN 547 part 1 Principles for determining the dimensions required for

openings for whole body access into machinery.S-002

EN 547 part 2 Principles for determining the dimensions required foraccess openings.

S-002

EN 547 part 3 Anthropometric data. S-002EN 563 Safety of machinery - Temperature of touchable

surfaces - Ergonomics data to establish temperaturelimit values for hot surfaces.

S-002

EN 614 Safety of machinery - Ergonomic design principles. S-002EN 614 part 1 Terminology and general principles. S-002EN 626 Safety of machinery - Reduction of risks to health from

hazardous substances emitted by machinery.S-002

EN 626 part 2 Manual handling of objects associated to machinery. S-002EN 626 part 3 Recommended forcelimits for machinery operations. S-002ISO 263/1 Evaluation of human exposure to whole body vibration

- Part 1: General requirements.S-002

ISO 5349 Guidelines for the measurement and the assessment ofhuman exposure to hand-transmitted vibration.

S-002

ISO 717/1 Acoustic rating of sound insulation in buildings and ofbuilding elements.

S-002

NORSOK C-001 Living quarters area. S-002NORSOK C-002 Architectural components and equipment. S-002NS 4815 Determination