Embed Size (px)
Citation preview
Standards and Specifications Regarding Water, Sanitary Sewer and Storm Drainage Infrastructure
Appendix A: Details
200 SERIES – WATER (CONT) 215 VENT PIPE INSTALLATION DETAILS 216 6” DIAMETER VENT PIPE SCREEN 217 RESIDENTIAL VENT PIPE ASSEMBLY 218 ADJUSTABLE STEEL PIPE VALVE SUPPORT 219 SACRIFICIAL ANODE INSTALLATION 220 REFERENCE POST 221 THRUST BLOCK LOCATION, BEARING AREAS AND VOLUMES 222 WATERLINE LOWERING DETAIL 223-1 THRUST BLOCK AND RESTRAINT FOR FIRE SUPPRESION LINES 223-2 THRUST BLOCK AND RESTRAINT FOR FIRE SUPPRESION LINES 223-3 THRUST BLOCK AND RESTRAINT FOR FIRE SUPPRESION LINES 223-4 THRUST BLOCK AND RESTRAINT FOR FIRE SUPPRESION LINES 224 BACKFLOW PREVENTION DEVICE 225 BACKFLOW PREVENTOR DRAIN FLOW CHART 226 BACKFLOW PREVENTION TYPICAL INSTALLATION 227 TYPICAL DOUBLE CHECK VALVE ASSEMBLY 228-1 IRRIGATION SYSTEM PRESSURE TYPE VACUUM BREAKER 228-2 IRRIGATION SYSTEM PRESSURE TYPE VACUUM BREAKER 228-3 IRRIGATION SYSTEM INSTALLATION FOR CONTINUOUS SERVICE 229 CUT-OFF WALL FOR DITCH OR CANAL CROSSING 230 IN-LINE ANCHOR 300 SERIES – SANITARY SEWER 300 SANITARY SEWER SERVICE DETAIL 301 SANITARY SEWER CLEANOUT 302 PRIVATE UNDERDRAIN CLEAN-OUT CONNECTION 303 GREASE INTERCEPTORS 304 SAND AND OIL INTERCEPTORS 305 ACID NEUTRALIZATION UNIT 400 SERIES – STORM SEWER 400-1 24” TYPE R INLET RING AND COVER 400-2 CURB OPENING INLET TYPE R MODIFIED 400-3 CURB OPENING INLET TYPE R MODIFIED
400-4 CURB OPENING INLET TYPE R MODIFIED 400-5 CURB OPENING INLET TYPE R MODIFIED 400-6 CURB OPENING INLET TYPE R MODIFIED 400-7 CURB OPENING INLET TYPE R MODIFIED 400-8 SPECIAL RETROFIT CURB OPENING INLET TYPE R MODIFIED 400-9 TYPE R INLET GREATER THAN 15’ LENGTH 401 INLET CONNECTION INTO STORM SEWER MAIN 402 CONCRETE CRADLE 403 TYPICAL CONCRETE DRAINAGE PAN 404 LOW FLOW CHANNELS
