-
8/9/2019 Standard static mixers - Brochure.pdf
1/11
Brochure E-0500
-
8/9/2019 Standard static mixers - Brochure.pdf
2/11
1Mixing Technology
Static mixers Stock Range
IntroductionEuromixers-Primix design and manufacture static
mixers and heat exchangers the mostpopular sizes of static mixers
are available from stock to meet urgent requirements.
Static mixers are a cost effective solution for a wide range of
mixing applications, most
commonly, the fluids are liquid however static mixers can also
be used to mix gasstreams, disperse gas into liquid or disperse
immiscible liquids.
Flow through the static mixer is diverted into two separate
streams, spiral-shaped staticmixer elements create a rotation of
the fluid, by which the fluid flows from the outside tothe inside
of the tube then reverse.
After one rotation through a single staticmixer element a second
diversion takesplace and simultaneously a reverse of the
previous rotation.
Stock - static mixer programmeThe most popular static mixers can
be built from stock components for r a p i d d i s p a t c h
,products and technical specifications which fall within the scope
of this programme canbe found in following pages.
Materials of construction AISI 316L or PVC. Other materials
available on request.
For water like products please refer to the static mixer
selection chart at the back of thisbrochure or if you need any help
please contact our application engineers
-
8/9/2019 Standard static mixers - Brochure.pdf
3/11
2Mixing Technology
WELDING END MIXER
WELDING DETAIL
NotesTolerances in accordance with ASTM A312
Welds are inspected with Dye PenetrantDimensions are subject to
change without notice
-
8/9/2019 Standard static mixers - Brochure.pdf
4/11
-
8/9/2019 Standard static mixers - Brochure.pdf
5/11
4Mixing Technology
ASTM 16.5 FLANGE MIXER
BSP (M) MIXER
Static mixer housing with BSP maleends
-
8/9/2019 Standard static mixers - Brochure.pdf
6/11
5Mixing Technology
BSP (F) MIXER
Static mixer housing with BSP female
ends
PVC WELDING END MIXER
-
8/9/2019 Standard static mixers - Brochure.pdf
7/11
6Mixing Technology
PVC UNION JOINT MIXER
PVC FLANGE MIXER
-
8/9/2019 Standard static mixers - Brochure.pdf
8/11
7Mixing Technology
PVC BSP (M)
PVC BSP (F)
-
8/9/2019 Standard static mixers - Brochure.pdf
9/11
8Mixing Technology
PVC - 3D
PVC 3D mixer housings are supplied with a Joint face with o-ring
groove on one endPN10 (+GF+) and a Union end & bush on the
opposite end.
-
8/9/2019 Standard static mixers - Brochure.pdf
10/11
9Mixing Technology
STATIC MIXER - SELECTION CHARTThe following table provides a
guide for selecting a static mixer operating with water
likefluids.
The static mixer can be selected based on
Flow and allowable pressure drop at the smallest static mixer
size - Option 1
Existing pipe sizes & allowable pressure drop at maximum
flow - Option 2.
OPTION 11 Select the total maximum flow2 Find the maximum
allowable pressure drop at the smallest static mixer size3 Select
the minimum number of mixer elements
OPTION 2
1 Select the mixer pipe size
2 Find the maximum allowable pressure drop at maximum flow3
Select the number of mixer elements.
Table 1 :
Pressure drop at theoretical 96% homogenous mixing with water
like fluids
-
8/9/2019 Standard static mixers - Brochure.pdf
11/11
