Standard Junction Details (solid wall with external

HH-SW-01 Solid External Masonry Wall, Externally Insulated - Suspended Beam And Block Floor, Insulation Above Slab

HH-SW-02 Solid External Masonry Wall, Externally Insulated - Suspended In-Situ Concrete Floor, Insulation Below Slab

HH-SW-04 Solid External Masonry Wall, Externally Insulated - Solid Wall Lintel

HH-SW-03 Solid External Masonry Wall, Externally Insulated - Concrete Ground Bearing Floor, Insulation Below Slab

HH-SW-05 Solid External Masonry Wall, Externally Insulated - Sill

HH-SW-06 Solid External Masonry Wall, Externally Insulated - Jamb

HH-SW-07 Solid External Masonry Wall, Externally Insulated - Intermediate Timber Floor Within A Dwelling

HH-SW-09 Solid External Masonry Wall, Externally Insulated - Pitched Roof, Gable, Insulation At Ceiling Level, Ventilated Loft

Detail Ref. Detail Title

HH-SW-08 Solid External Masonry Wall, Externally Insulated - Precast Concrete Separating Floor Between Dwellings

HH-SW-10 Solid External Masonry Wall, Externally Insulated - Pitched Roof, Gable, Insulation At Rafter Level, Unventilated Rafter Void

HH-SW-11 Solid External Masonry Wall, Externally Insulated - Pitched Roof, Eaves, Insulation At Ceiling Level, Ventilated Loft

HH-SW-12 Solid External Masonry Wall, Externally Insulated - Pitched Roof, Eaves, Insulation At Rafter Level, Unventilated Rafter Void

HH-SW-13 Solid External Masonry Wall, Externally Insulated - Normal Corner

HH-SW-14 Solid External Masonry Wall, Externally Insulated - Inverted Corner

HH-SW-15 Solid External Masonry Wall, Externally Insulated - Party Wall Between Dwellings

Standard Junction Details(solid wall with external insulation)

INDEX

H+H UK Limited

Fax +44 (0)1732 887013

Kent, TN15 9HZ.Ightham, Sevenoaks

Tel +44 (0)1732 880580

Celcon HouseTechnical Services Dept.

E-mail [email protected]

DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

AN.T.S.

REV. DESCRIPTION.DATE. BY.

These details have been produced for guidance only. It is theresponsibility of the building designer to ensure that the detailsshown are compatible with the overall building design and willsatisfy the relevant parts of the Building Regulations applicablebefore they are adopted into the project design.

Nov 2013

LABC NOTE ADDED.11.2015 SJBA

ventilated void

floor insulation to tightly abutwall blockworkdpm

precast beam and block floorwith Celcon Standard infill blocks

Celcon blocks aboveand below dpc

Celcon infill blocks built into wallsto have the same compressivestrength as wall blocks

perimeter insulation to provideminimum resistance of 0.8m²K/W

wall insulation belowdpc to be continued at

least 215mm below topof floor beam

base profile metal orplastic with no gapsabove or below dpc

max. screed thickness 75mm

at least one course ofblocks below ground

wall insulation belowdpc to have maximum

λ of 0.038W/mK

Solid External Masonry Wall,

Externally Insulated - Suspended Beam

And Block Floor, Insulation Above Slab

HH-SW-01

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

A1:100 @ A4



Nov 2013

For Ψ values applicable to this detail,see Constructive Details CD0038orLABC Registered ConstructionDetails E5SMEW1 - 12.


dpm

dpc

floor insulation to tightly abutwall blockwork

at least two courses ofblocks below slab

wall insulation to becontinued at least

215mm belowunderside of slab

wall insulation below dpcto have a max. λ of 0.038W/mK


additional 15mm floor edge insulationstrip with max. λ = 0.025W/mK

base course incorporatinglapped dpm and dpc



Externally Insulated - Suspended In-Situ

Concrete Floor, Insulation Below Slab

HH-SW-02

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

A1:100 @ A4



Nov 2014

A 11/2015 SJBLABC NOTE ADDED. MAX. FLOORTHICKNESS NOTE REMOVED.


dpm

dpc

at least two courses ofblocks below underside of slab


floor insulation to tightly abutwall blockwork

wall insulation below dpcto have a max. λ of 0.038W/mK

wall insulation to becontinued at least

215mm belowunderside of slab


perimeter insulation strip with

min. resistance of 0.8mK/W

base course incorporatinglapped dpm and dpc

HH-SW-03


Externally Insulated - Concrete Ground

Bearing Floor, Insulation Below Slab

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

A1:100 @ A4



Nov 2013

A 11/2015 SJBLABC NOTE ADDED. MAX. FLOORTHICKNESS NOTE REMOVED


Celcon blocks

solid wall lintel

outer face of block andwindow frame to align flush

external wall insulation

15mm min. insulationoverlap with frame

Solid External Masonry Wall,Externally Insulated - Solid Wall Lintel

HH-SW-04

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A




Celcon blocksouter face of block andwindow frame to align flush

Solid External Masonry Wall,Externally Insulated - Sill

HH-SW-05

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



15mm min. insulation overlap with frame

Celcon blocks

external wallinsulation

outer face of block andwindow frame aligned flush

Solid External Masonry Wall,Externally Insulated - Jamb

HH-SW-06

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



timber floor joists may be builtinto blockwork or supported onjoist hangers

Celcon blocksexternal wall insulation

HH-SW-07


Externally Insulated - Intermediate TimberFloor Within A Dwelling

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



precast concrete plankfloor 225mm max. thickness

ceiling void max.thickness = 150mm

concrete screed max.thickness 75mm

resilient layer to RobustDetails specification

Celcon blocks

225mm max. height fire stop

with max λ = 0.040 W/mKwhere required


Solid External Masonry Wall,Externally Insulated - Precast Concrete

Separating Floor Between Dwellings

HH-SW-08

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



pack compressible insulationbetween last truss and wall

Celcon blocks

ceiling insulation thickness between130mm and 410mm, between and over

ceiling joists with max. λ = 0.044W/mK


HH-SW-09


Externally Insulated - Pitched Roof, Gable,

Insulation At Ceiling Level, Ventilated Loft

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



100mm minimum

breathable roofmembrane

Celcon blocks

pack compressible insulationbetween last rafter and wall

insulation under rafters(optional)

min. 150mm rafters void fullyfilled with insulation withmax. λ = 0.040W/mK


fill this void with insulation havinga max. λ of 0.040W/mK

HH-SW-10


Externally Insulated - Pitched Roof, Gable, InsulationAt Rafter Level, Unventilated Rafter Void

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



ceiling insulation betweenand over roof trusses with

max. λ = 0.044W/mK,130mm - 410mm thick

ventilated loft

Celcon blocks

wall plate to suit

proprietary ventilatorbetween rafters

insulation to entirely filleaves gap between wall

insulation andceiling insulation

min. 50mm insulationbetween wall plate

and vent


Solid External Masonry Wall,Externally Insulated - Pitched Roof, Eaves,Insulation At Ceiling Level, Ventilated Loft

HH-SW-11

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



insulation underrafters (optional)

insulation to entirelyfill eves gap between

wall insulation andceiling insulation

wall plate to suit

Celcon blocksexternal wall insulation

breathable roofmembrane

150mm min. rafters with insulationof max. λ = 0.040W/mk between,to sloping ceiling section

HH-SW-12

Solid External Masonry Wall,Externally Insulated - Pitched Roof, Eaves, Insulation

At Rafter Level, Unventilated Rafter Void

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



Celcon blocks


Solid External Masonry Wall,Externally Insulated - Normal Corner

HH-SW-13

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



Celcon blocks


Solid External Masonry Wall,Externally Insulated - Inverted Corner

HH-SW-14

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



Celcon blocks

2 x 100mm min. leaves toseparating walls:Celcon Standard (3.6N/mm²)Celcon High Strength (7.3N/mm³)Celcon Super Strength (8.7N/mm²)

proprietary insulated fire stopwith a max. λ = 0.044W/mK

where required

8mm parge coat may be omitted(subject to Robust Detail requirements)

cavity width min. 75mmup to 100mm max.

(subject to Robust Detailrequirements)

party wall insulation withmax. λ = 0.044W/mK


Externally Insulated - Party Wall BetweenDwellings

HH-SW-15

H+H UK Limited

Fax +44 (0)1732 887013


Tel +44 (0)1732 880580



DRAWN BY

TITLE

DATE SCALE

CHECKED BY

REV.NO.

DWG No.

AHRSJB

1:100 @ A4



Nov 2013 A



Documents

Standard Junction Details (solid wall with external