STANDARD FIRE HOSEREEL CABINET

FEATURES• Compact and elegant design.• Quality finishes in epoxy/polyester powder coated and oven baked.• Easy and fast installation with minimum labour required.

Fig.300

Fig.320

Fig.310

Fig. 300 � � �

Fig. 310 � � � �

Fig. 320 � * � �

Model

Features for 25mm x 30M Swing Type Fire Hosereel Cabinet

Plasticdoorcam

3mmglass Springlock

SpareKey Box

Aluminiumhandle

* The glass is 5mm tempered type.

GENERAL“AE” range of surface wall mounted standard type fire hosereel cabinets are generally fabricated from electro-galvanised steel material. Aluminium or stainless steel materials are available upon request.

The door hinges are either riveted or welded to the cabinet and swings out 180 degree from left to right. The cabinet comes with viewing panel design at the door to show the equipment installed inside.

The quality of workmanship and finishes are carefully planned and executed from the initial stage of preparing the material, fabrication, upto the surface preparation and powder coating.

The standard finishes of the electro-galvanised steel and aluminium cabinets are “Red” epoxy/polyester powder coated and oven baked. Stainless steel Type 304 and 316 grade cabinets come with 4B quality finishes. Other finishes available on request.

STANDARD FIRE HOSEREEL CABINET

* All dimensions shown are in millimetres.* Due to the improvement in the design and standard, we reserve the right to change the specifications without prior notice.

Fig 300

Fig 310

Fig 320

FIRE HOSEREEL

OPERATING INSTRUCTION: TURN ON THE INLET VALVE BEFORE RUNNING OUT THE HOSE

340mm 16mm

800mm

800mm

Steel hinge

Plastic doorcam (w/o key-lock type)

“FRONT ELEVATION” “SECTION VIEW” “REAR VIEW”

125mm

125mm

495mm

25mm

95mm 50mm 200mm

12mm dia x 4 nos mounting holes

100mm

“PLAN VIEW”

U-slot cut-out at bottom panel for hosereel piping

3mm plain glass

FIRE HOSEREEL

OPERATING INSTRUCTION: TURN ON THE INLET VALVE BEFORE RUNNING OUT THE HOSE

340mm 16mm

800mm

800mm

Steel hinge

“Key-alike” springlock

“FRONT ELEVATION” “SECTION VIEW” “REAR VIEW”

125mm

125mm

495mm

25mm

95mm 50mm 200mm

12mm dia x 4 nos mounting holes

100mm

“Plan View”

U-slot cut-out at bottom panel for Hosereel piping

3mm plain glass

70mm x 70mm Spare Key Box

FIRE HOSEREEL INSTRUCTIONS: IN CASE OF FIRE, BREAK GLASS TO OPEN DOOR

TURN ON THE INLET VALVE BEFORE RUNNING OUT THE HOSE

362mm 18mm

800mm

800mm

Welded lift-up Steel hinge

“Key-alike” springlock

“Front Elevation” “Section View” “Rear View”

Aluminium handle

25mm

100mm 50mm 200mm

12mm dia x 4 nos mounting holes

100mm

“Plan View”

U-slot cut-out at bottom panel for hosereel piping

5mm clear “tempered” glass

U-Rubber gasket

Door with single bending with gap for fixing U-Rubber

123mm

565m

m

145mm

50mm high “White” silk-screen wordings

12.5mm high “White” silk-screen wordings