STANDARD EQUIPMENT OPTIONAL EQUIPMENT O ......2/3 *Photo may include optional equipment. Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on steps

ISO Standard cabin

All-weather steel cab with 360O visibility

Safety glass windows

Rise-up type windshield wiper

Sliding fold-in front window

Sliding side window(LH)

Lockable door

Hot & cool box

Storage compartment & Ashtray

Transparent cabin roof-cover

Radio / USB player

Handsfree mobile phone system with USB

12 volt power outlet (24V DC to 12V DC converter)

Sun visor

Computer aided power optimization (New CAPO) system

3-power mode, 2-work mode, User mode

Auto deceleration & one-touch deceleration system

Auto warm-up system

Auto overheat prevention system

Automatic climate control

Air conditioner & heater

Defroster

Self-diagnostics system

Starting Aid (air grid heater) for cold weather

Centralized monitoring

LCD display

Engine speed or Trip meter/Accel.

Clock

Gauges

Fuel level gauge

Engine coolant temperature gauge

Hyd. oil temperature gauge

Warnings

Check engine

Communication error

Low battery

Air cleaner clogging

Indicators

Max Power

Fuel warmer

Auto idle

Door and cab locks, one key

Two outside rearview mirrors

Mechanical suspension seat with heater

Four front working lights

Electric horn

Batteries (2 x 12V x 72 AH)

Battery master switch

Removable clean-out screen for cooler

Automatic swing brake

Removable reservoir tank

Fuel pre-filter with fuel warmer

Boom holding system

Arm holding system

Track shoes (500mm, 20”)

Track rail guard

Accumulator for lowering work equipment

Electric transducer

Lower frame under cover (Normal)

Cabin Rops (ISO 12117-2)

ROPS (Roll Over Protective Structure)

STANDARD EQUIPMENT

Fuel filler pump (35 L/min)

Beacon lamp

Safety lock valve for boom cylinder with overload warning device

Safety lock valve for arm cylinder

Single-acting piping kit (breaker, etc.)

Double-acting piping kit (clamshell, etc.)

Quick coupler

Travel alarm

Booms

4.3 m, 14’ 1”

Arms

1.96 m, 6’ 5”

2.26 m, 7’ 5”

2.81 m, 9’ 3”

Cabin FOPS/FOG (ISO/DIS 10262) Level II

FOPS (Falling Object Protective Structure)

FOG (Falling Object Guard)

Cabin lights

Cabin front window rain guard

Track shoes

Rubbber pad (500mm, 20”)

Triple grousers shoe (500mm, 20”)



Track pad (500mm, 20”)

Lower frame under cover (Additional)

Long crawler lower frame

Dozer blade

Tool kit

Rearview camera

Hi-mate (Remote Management System)

Seat

Air suspension seat with heater

* Standard and optional equipment may vary. Contact your Hyundai dealer for

more information. The machine may vary according to International standards.

* The photos may include attachments and optional equipment that are not

available in your area.

* Materials and specifications are subject to change without advance notice.

* All imperial measurements rounded off to the nearest pound or inch.

OPTIONAL EQUIPMENT

*Photo may include optional equipment.

MOVING YOU FURTHER

With Tier 4 Interim Engine installed

HYUNDAI HEAVY INDUSTRIES

PLEASE CONTACT

www.hyundai-ce.com 2014. 12 Rev 0

2/3


Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on steps

Large upper roller cut-outs for debris clean-out / Tapered side frames for debris clean-out / Grease-

type track tensioner

Undercarriage

RMS (Remote Management System) works through GPS/satellite technology to ultimately provide

better customer service and support.

New patented hydraulic control for improved controllability / Improved control valve design for

added efficiency and smoother operation / New auto boom and swing priority system for optimum

speed / New auto power boost feature for additional power when needed / Improved arm-in and

boom-down flow regeneration system for added speed and efficiency

Hydraulic System Improvements

Low emission, complies Tier 4 Interim & EU Stage III B regulation

Low noise, meet EU 2nd noise regulation

Engine Technology

Industry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumps

New compact solenoid block equipped with 4 solenoid valves, 1 EPPR valves, 1 check valve

accumulator and pilot filter - controls 2 speed travel, power boost, boom priority, safety lock

Pump Compartment

Improved Visibility

Enlarged cab with improved visibility / See-through upper skylight for visibility and ventilation

Larger right-side glass, now one piece, for better right visibility

Safety glass windows on all sides - less expensive than (polycarbonate) and won’t scratch or fade

Closeable sunshade for operator convenience / Reduced front window seam for improved operator

view

Improved Cab Construction

New steel tube construction for added operator safety, protection and durability

New window open/close mechanism designed with cable and spring lift assist and single latch

release

Improved Suspension Seat / Console Assembly

Ergonomic joysticks with auxiliary control buttons for attachment use. Now with new sleek styling

Heated suspension (standard) or optional air ride suspension with heat

New joystick consoles - now adjustable in height by pushing the button

Integrated seat with consoles - reduce the operator fatigue

Advanced 7” Color Cluster with Touch Screen

New Color LCD Display with easy to read digital gauges for hydraulic oil temperature, water

temperature, and fuel. Simplified design makes adjustment and diagnostics easier. Also, new

enhanced features such as rear-view camera are integrated into monitor.

3 power modes : (P) Power, (S) Standard, (E) Economy, 2 work modes : Dig & Attachment, (U) User

mode for operator preference

Enhanced self-diagnostic features with GPS download capability

One pump flow or two pump flow for optional attachment is now selectable through the cluster /

New anti-theft system with password capability

Boom speed and arm regeneration are selectable through the monitor.

Auto power boost is now available - selectable (on/off) through the monitor.

Powerful air conditioning and heat with auto climate control, 20% more heat and air output than

7A series!

Enhanced Operator Cab

Machine Walk-Around

Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator

maximum performance, more precision, versatile machine preferences, and proven quality.

Take pride in your work with Hyundai!

PRIDE AT WORK

4/5


The engine horsepower and hydraulic horsepower together in unison through the advanced CAPO(Computer Aided

Power Optimization) system, flow for the job at hand. Operator can set their own preferences for boom or swing

priority, power mode selection and optional work tools at the touch of a button.

The CAPO system also provides complete self diagnostic features and digital gauges for important information like

hydraulic oil temperature, water temperatures and fuel level. This system interfaces with multiple sensors placed

throughout the hydraulic system as well as the electronically controlled engine to provide the optimum level of

engine power and hydraulic flow.

Computer Aided Power

Improved Hydraulic SystemTo achieve optimum precision, Hyundai redesigned the

hydraulic system to provide the operator with super fine

touch and improved controllability. Improved pump flow

control reduces flow when controls are not being used to

minimize fuel consumption.

Improved spool valves in the control valve are engineered

to provide more precise flow to each function with less

effort.

Improved hydraulic valves, precision-designed variable

volume piston pumps, fine-touch pilot controls, and

enhanced travel functions make any operator running a 9A

series look like a smooth operator. Newly improved features

include arm-in and boom-down flow regeneration, improved control valve technology and innovative auto boom

and swing priority for optimal performance in any application.

P (Power Max) mode maximizes machine speed and power for mass production.

S (Standard) mode provides a reduced, fixed rpm for optimum performance and improved

fuel economy. For maximum fuel savings and improved control, E (Economy) mode

provides precise flow and engine power based on load demand. Three unique power

modes provide the operator with custom power, speed and fuel economy.

Power Mode

Some jobs require more precise machine settings. Using the versatile U (User) mode, the

operator can customize engine speed, pump output, idle speed and other machine

settings for the job at hand.User Mode

The work mode allows the operator to select single flow attachments like a hydraulic

breaker or bi-directional flow attachments like a crusher. Flow settings unique to each

attachment can be programmed from within the cluster.Work Mode

Innovative hydraulic system technologies make the 9A series excavator fast,

smooth and easy to control.

PRECISION

Auto Boom-swing PriorityThis smart function automatically and continuously looks the ideal

hydraulic flow balance for the boom and swing motions of the

machine. The advanced CAPO system monitors the hydraulic system

and adjusts its settings to maximize performance and productivity.

*Photo may include optional equipment.*Photo may include optional equipment.

9A series is designed for maximum performance to keep the

operator working productively.

PERFORMANCE

Min. swing radius

2,340mm

Rear-end swing radius

1,495mm

Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing

springs.

Track Rail Guard & AdjustersTrack Rail Guard & Adjusters

Excellent Performance in Confined AreasR125LCR-9A's short (1,500mm) tail swing radius allows the

operator work in confined areas like close to buildings on

roadways, and in urban areas. This Compact radius design

provides easy and efficient operation in any limited space

work environment.

Structure StrengthThe 9A series cabin structure has been fitted with stronger

but slimmer tubing for more safety and improved visibility.

Low-stress, high strength steel is integrally welded to form a

stronger, more durable upper and lower frame. Structural

integrity was tested by way of FEM (Finite Elements Method)

analysis and long-term durability tests.

ROPS(Roll Over Protective Structure) cab can be equipped to

enhance operator safety.

Better Performance

Using DPF (Diesel Particulate Filter) enables uncompromised, fuel

economy and reduced cooling pack size, because the engine

calibration does not solely need to be focussed on low paticulates. By

using mainly passive regeneration and low back pressure

aftertreatment designs fuel economy is not negatively impacted.

Integrated aftertreatment without operating impact

The 1204E engines have fully transparent regeneration strategies and

service free DPF, completely seamless to the operator.

One solution for all regions

Area mandating the use of DPF are increasing and european air

quality directive will drive more non-attainment zones. Because our

products use DPFs, our customers don't have to offer a retrofit DPF

option to allow machines to operate in these territories.

Perkins 1204E EngineTier 4 interim, four cylinder, 4 cycle, turbo-charged, charge air cooled

Perkins 1204E engine provides maximum power, reliability, optimum

fuel economy, and reduced emissions. Electronically controlled fuel

injection and diagnostic capabilities add to the engines efficiency and

serviceability.

8/96/7

8/9

The advanced new cluster with 7 inch wide color LCD with Touch screen and

toggle switch allows the operator to select his personal machine preferences.

Power and work mode selection, self diagnostics, optional rear-view camera,

maintenance check lists, start-up machine security, and video functions were

integrated into the cluster to make the machine more versatile and the

operator more productive.

The newly applied FM transmitter application transmits signal to USB & Radio

player with the same frequency as cluster. The player outputs the audio

through the internal speaker in the cab. The video & firmware updates are

possible with USB host support and an adjustable cluster hinge bracket

improves cluster visibility.

Operator - Friendly Cluster

Work is stressful enough. Your work environment should be stress free. Hyundai's 9A series

provides improved cab amenities, additional space and a comfortable seat to minimize stress to

the operator. A powerful climate control system provides the operator with optimum air

temperature. An advanced audio system with USB player, AM/FM stereo and MP3 capabilities, plus

remotely located controls is perfect for listening to music favorites.

Operators can even talk on the phone with the hands-free cell phone feature. Also, the newly

designed remote control offers radio hands-free function.

9A series excavators provide smart key system as an option. This allows the operator to start the

engine by the push of a starter button without inserting a key in the ignition.

Reduced Stress

Smart Key System (Option)

In 9A series cabin you can easily adjust the seat, console and

armrest settings to best suit your comfort level. The seat

integrated with console absorb console vibration by seat

suspension and reduce operator‘s fatigue. Other preference settings that add to overall operator

comfort include the fully automatic high capacity airconditioning system, transparent

polycarbonate glass sun roof, large and easy to control sun visor,

and the Radio / USB player.

Operator Comfort


Wide Cabin with Excellent Visibility

The newly designed cabin was conceived for more space, a wider field of view and

operator comfort. Special attention was given to a clear, open and convenient interior

with plenty of visibility on the machine surroundings and the job at hand. This well

balanced combination of precision aspects put the operator in the perfect position to

work safely and securely.

Horizontal

Total : 150o

Vertical

Total : 30o

Monitor Tilt Range

Operating a 9A series is unique to every operator. Operators can fully customize

their work environment and operating preferences to fit their individual needs.

PREFERENCE

10/11


Easy AccessGround-line access to filters, lube fittings, fuses, machine computer

components and wide open compartments makes service more

convenient on the 9A series.

Hi-mate (Remote Management System)

Hi-mate, Hyundai's proprietary remote management system,

provides operators and dealer service personnel access to

vital service and diagnostic information on the machine from

any computer with internet access. Users can pinpoint

machine location using digital mapping and set machine

work boundaries, reducing the need for multiple service

calls. Hi-mate saves time and money for the owner and

dealer by promoting preventative maintenance and reducing

machine downtime.

Fuel Efficiency 9A series excavators are engineered to be extremely fuel efficient.

New innovations like fan clutch, the variable speed remote fan, three-

stage auto decel system and the new economy mode help to conserve

fuel and reduce the impact on the environment.

9A series is designed to maximize profitability through improved

efficiencies, enhanced service features and longer life components.

PROFITABILITY

Long-Life Components9A series excavators were designed with bushings designed for long-life lube intervals

(250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters

(1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and

integrated preheating systems which extend service intervals, minimize operating costs

and reduce machine down time.

Specifications

MODEL

Type

Rated

flywheel

horse power

Max. torque

Bore X stroke

Piston displacement

Batteries

Starting motor

Alternator

54.0 kgf.m(391 lbf.ft)/ 1,400 rpm

105 x 127 mm (4.1” x 5.0”)

4,400cc (268.5 in3)

2 X 12V X 100AH

24V- 4.5kW

24V- 85Amp

DIN

SAEJ1995 (gross)

J1349 (net)

6271/1 (gross)

6271/1 (net)

Water cooled, 4 cycle Diesel,

4-cylinders in line, direct injection,

turbocharged charger and air cooled

124 HP (92.7 kW) / 1,950 rpm

116 HP (87 kW) / 1,950 rpm

126 PS (92.7 kW) / 1,950 rpm

118 PS (87 kW) / 1,950 rpm

Perkins 1204E

ENGINE

MAIN PUMP

Type

Rated flow

Sub-pump for pilot circuit

Cross-sensing and fuel saving pump system.

Variable displacement tandem axis piston pumps

2 X 123.5L /min (32.6 US gpm / 27.2 UK gpm)

Gear pump

HYDRAULIC SYSTEM

DRIVES & BRAKES

HYDRAULIC MOTORS

Travel

Swing

Two speed axial pistons motor

with brake valve and parking brake

Axial piston motor with automatic brake

HYDRAULIC CYLINDERS

No. of cylinder

bore X stroke

Boom: 2-105 X 1,105 mm (4.1” X 43.5”)

Arm: 1-115 X 1,138 mm (4.5” X 44.8”)

Bucket: 1-100 X 840 mm (3.9” X 33.1”)

Blade: 2-100 X 250 mm (3.9” X 9.8”)

2 pcs Boom

RELIEF VALVE SETTING

Implement circuits

Travel

Power boost (boom, arm, bucket)

Swing circuit

Pilot circuit

Service valve

350 kgf/cm2 (4,980 psi)

350 kgf/cm2 (4,980 psi)

380 kgf/cm2 (5,410 psi)

285 kgf/cm2 (4,050 psi)

40 kgf/cm2 (570 psi)

Installed

OPERATING WEIGHTShoes

Type

Triple

grouser

Operating weight

kg(lb)

12,350(27,230)

13,050(28,770)

12,500(27,560)

13,200(29,100)

12,500(17,560)

13,200(29,100)

12,650(27,890)

13,350(29,430)

12,650(27,890)

13,350(29,430)

12,800(28,220)

13,500(29,760 )

500 (20”)

600 (24”)

700 (28”)

R125CR-9A

R125CR-9A (Dozer type)

R125LCR-9A

R125LCR-9A (Dozer type)

R125CR-9A


R125LCR-9A


R125CR-9A


R125LCR-9A


Ground pressure

kgf/cm2(psi)

0.44(6.24)

0.46(6.54)

0.42(5.91)

0.44(6.24)

0.37(5.26)

0.39(5.55)

0.35(4.98)

0.37(5.26)

0.32(4.55)

0.34(4.83)

0.30(4.27)

0.32(4.55)

Drive method

Drive motor

Reduction system

Max. drawbar pull

Max. travel speed(high) / (low)

Gradeability

Parking brake

Fully hydrostatic type

Axial piston motor, in-shoe design

Planetary reduction gear

13,300 kgf (29,321 lbf)

5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)

350 (70 %)

Multi wet disc

SWING SYSTEMSwing motor

Swing reduction

Swing bearing lubrication

Swing brake

Swing speed

Fixed displacement axial piston motor

Planetary gear reduction

Grease-bathed

Multi wet disc

12.6 rpm

COOLANT & LUBRICANT CAPACITYRefilling

Fuel tank

Engine coolant

Engine oil

Swing device-gear oil

Final drive(each)-gear oil

Hydraulic system(including tank)

Hydraulic tank

liter

210

14.5

10.5

2.5

2.2

160

80

US gal

61.3

2.8

2.8

0.7

0.6

47.6

25.4

UK gal

51.0

2.3

2.3

0.5

0.5

39.6

21.1

CONTROLPilot pressure operated joysticks and pedals with detachable lever provide almost

effortless and fatigueless operation.

Pilot control

Traveling and steering

Engine throttle

Two joysticks with one safety lever

(LH): Swing and arm, (RH): Boom and bucket(ISO)

Two levers with pedals

Electric, Dial type

UNDERCARRIAGEThe X-leg type center frame is integrally welded with reinforced box-section track

frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock

absorbing springs and sprockets, and a track chain with double or triple grouser shoes.

Center frame

Track frame

No. of carrier roller on each side

No. of track roller on each side

No. of rail guard on each side

X - leg type

Pentagonal box type

1 EA

6 EA

1 EA

1 EA

6 EA

1 EA

OPERATING WEIGHT (APPROXIMATE)Operating weight, including 4,300mm (14’ 1”) boom, 2,260mm (7’ 5”) arm, SAE

heaped 0.40m3 (0.52 yd3) bucket, lubricant, coolant, full fuel tank, full hydraulic tank,

and all standard equipments.

MAJOR COMPONENT WEIGHTUpperstructure

4.3m (14’ 1”)mono boom(with arm cylinder)

6,950 kg (15,320 lb)

950 kg (2,090 lb)

Width mm(in)

R125CR-9A R125LCR-9A

41EA 43EANo. of shoes on each side

Capacity

m3 (yd3)

BoomLength

Weight

Length

Weight

mm (ft.in)

kg (lb)

mm (ft.in)

kg (lb)

1,960 (6’ 5”)

320 (710)

78.5[85.6]

8,000[8,730]

17,640[19,240]

90.2[98.4]

9,200[10,040]

20,280[22,120]

60.2[65.7]

6,140[6,700]

13,540[14,770]

62.9[68.6]

6,410[6,990]

14,130[15,410]

[ ]:

Power

Boost

78.5[85.6]

8,000[8,730]

17,640[19,240]

90.2[98.4]

9,200[10,040]

20,280[22,120]

55.7[60.8]

5,680[6,200]

12,520[13,660]

58.1[63.3]

5,920[6,460]

13,050[14,240]

2,260 (7’ 5”)

340 (750)

78.5[85.6]

8,000[8,730]

17,640[19,240]

90.2[98.4]

9,200[10,040]

20,280[22,120]

48.1[52.4]

4,900[5,350]

10,800[11,780]

49.7[54.2]

5,070[5,530]

11,180[12,200]

2,810 (9’ 3”)

400 (880)

4,300 (14’ 1”)

950 (2,090)Remarks

Arm

Bucket

digging

force

SAE

kN

kgf

lbf

ISO

kN

kgf

lbf

SAE

kN

kgf

lbf

ISO

kN

kgf

lbf

Arm

crowd

force

Note: Boom weight includes arm cylinder, piping, and pin

Arm weight includes bucket cylinder, linkage, and pin

SAE

heaped

CECE

heaped

Without

sidecutters

With

sidecutters

Width

mm (in) Weight

kg (lb)

Recommendation mm (ft.in)

4,300 (14’ 1”) Boom

1,960 (6’ 5”) Arm 2,260 (7’ 5”) Arm 2,810 (9’ 3”) Arm

0.30 (0.39)

0.40 (0.52)

0.45 (0.59)

0.50 (0.65)

0.59 (0.77)

0.27(0.35)

0.44(0.58)

0.40(0.52)

0.45(0.59)

0.52(0.68)

610(24.0)

760(29.9)

830(32.7)

900(35.4)

1,020(40.2)

720(28.3)

870(34.3)

940(37.0)

1,010(39.8)

1,130(44.5)

360(790)

410(900)

430(950)

450(990)

490(1,080)

SAE

heaped

m3 (yd3)

0.30 (0.39) 0.40 (0.52) 0.45 (0.59) 0.50 (0.65) 0.59 (0.77)

●

●

●

●

■

●

●

●

■

▲

●

●

■

▲

-

● : Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less

■ : Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less

▲ : Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less

Booms and arms are welded, a low-stress, full-box section design. 4.3m(14’ 1”) boom and 1.96m(6’ 5”), 2.26m(7’ 5”), 2.81m(9’ 3”)arms are available.

ATTACHMENT

BUCKETS

DIGGING FORCE

1st: 2-105 X 995 mm (4.1” X 39.2”)

2nd: 1-145 X 613 mm (5.7” X 24.1”)

Dimensions & Working RangeR125CR-9A DIMENSIONS

A

A’

B

B’

C

D

E

F

Boom length

Arm length

Max. digging

reach

Max. digging

reach on ground

Max. digging

depth

Max. digging

depth (8' level)

Max. vertical wall

digging depth

Max. digging

height

Max. dumping

height

Min. swing radius

5,420

(17’ 8”)

4,970

(16’ 3”)

8,480

(27’ 9”)

6,120

(20’ 1”)

2,460

(8’ 1”)

2,810

(9’ 3”)

A

A’

B

B’

C

D

E

F

Boom length

Arm length

Max. digging

reach

Max. digging

reach on ground

Max. digging

depth

Max. digging

depth (8' level)

Max. vertical wall

digging depth

Max. digging

height

Max. dumping

height

Min. swing radius

mm (ft.in)R125CR-9A WORKING RANGE

D

E

B B' C

A

A'

F

A

B

D,D'

I

C

J F

E

G

H

L

K

mm (ft.in)

A

B

C

D

D’

E

F

G

H

2,610 (8' 6")

3,340 (11' 0")

890 (3’ 10”)

1,500 (4’ 10”)

1,500 (4’ 10”)

2,490 (8’ 2”)

2,900 (9’ 6”)

440 (1’ 5”)

1,990 (6’ 6”)

Boom length

Arm length

Overall length

Overall height

of boom

I

J

500

(20”)

6,760

(22’ 2”)

2,500

(8’ 2”)

600

(24”)

6,780

(22’ 3”)

2,600

(8’ 6”)

700

(28”)

2,700

(8’ 10”)

4,300 (14’ 1”)

Track shoe width

Overall width

K

L

Boom length

Arm length

Overall length

Overall height

of boom

I

J

500

(20”)

600

(24”)

2,260

(7’ 5”)

6,860

(22’ 6”)

2,740

(9’ 0”)

2,600

(8’ 6”)

700

(28”)

2,810

(9’ 3”)

6,800

(22’ 3”)

3,010

(10’ 1”)

2,700

(8’ 10”)

Track shoe width

Overall width

14/15

Dimensions & Working RangeR125LCR-9A DIMENSIONS

A

B

D,D'

I

C

J F

E

G

H

L

K

Tumbler distance

Overall length of crawler

Ground clearance of counterweight

Tail swing radius

Rear-end length

Overall width of upperstructure

Overall height of cab

Min. ground clearance

Track gauge

A

B

C

D

D’

E

F

G

H

2,780 (9' 2")

3,680 (12' 1")

890 (2’ 10”)

1,500 (4’ 10”)

1,500 (4’ 10”)

2,490 (8’ 2”)

2,900 (9’ 6”)

440 (1’ 5”)

1,990 (6’ 6”)

mm (ft.in)

mm (ft.in)R125LCR-9A WORKING RANGE

D

E

B B' C

A

A'

F

A

A’

B

B’

C

D

E

F

Boom length

Arm length

Max. digging

reach

Max. digging

reach on ground

Max. digging

depth

Max. digging

depth (8' level)

Max. vertical wall

digging depth

Max. digging

height

Max. dumping

height

Min. swing radius

1,960

(6’ 5”)

7,420

(24’ 4”)

7,270

(23’ 10”)

4,760

(15’ 7”)

4,500

(14’ 9”)

4,140

(13’ 7”)

7,910

(25’ 11”)

5,550

(18’ 3”)

2,280

(7’ 6”)

2,260

(7’ 5”)

7,700

(25’ 3”)

7,560

(24’ 10”)

5,060

(16’ 7”)

4,830

(15’ 10”)

4,410

(14’ 6”)

8,100

(26’ 7”)

5,740

(18’ 10”)

2,340

(7’ 8”)

4,300

(14’ 1”)

2,810

(9’ 3”)

8,230

(27’ 0”)

8,090

(26’ 6”)

5,610

(18’ 4”)

5,420

(17’ 8”)

4,970

(16’ 3”)

8,480

(27’ 9”)

6,120

(20’ 1”)

2,460

(8’ 1”)

2,810

(9’ 3”)

8,230

(27’ 0”)

8,090

(26’ 6”)

5,610

(18’ 4”)

5,420

(17’ 8”)

4,970

(16’ 3”)

8,480

(27’ 9”)

6,120

(20’ 1”)

2,460

(8’ 1”)

A

A’

B

B’

C

D

E

F

Boom length

Arm length

Max. digging

reach

Max. digging

reach on ground

Max. digging

depth

Max. digging

depth (8' level)

Max. vertical wall

digging depth

Max. digging

height

Max. dumping

height

Min. swing radius

1,960

(6’ 5”)

7,420

(24’ 4”)

7,270

(23’ 10”)

4,760

(15’ 7”)

4,500

(14’ 9”)

4,140

(13’ 7”)

7,910

(25’ 11”)

5,550

(18’ 3”)

2,280

(7’ 6”)

2,260

(7’ 5”)

7,700

(25’ 3”)

7,560

(24’ 10”)

5,060

(16’ 7”)

4,830

(15’ 10”)

4,410

(14’ 6”)

8,100

(26’ 7”)

5,740

(18’ 10”)

2,340

(7’ 8”)

4,300

(14’ 1”)

mm (ft.in)R125CR-9A (DOZER TYPE) WORKING RANGE

D

E

B B' C

A

A'

F

Dimensions & Working RangeR125CR-9A (DOZER TYPE) DIMENSIONS

A

B

D,D'

I

J

O MC

N

E

F

G

H

L

K

mm (ft.in)

Boom length

Arm length

Overall length

Overall height

of boom

I

J

500

(20”)

1,960

(6’ 5”)

7,560

(24’ 8”)

2,530

(8’ 3”)

2,500

(8’ 2”)

600

(24”)

2,260

(7’ 5”)

7,580

(24’ 9”)

2,740

(9’ 0”)

2,600

(8’ 6”)

700

(28”)

2,810

(9’ 3”)

7,520

(24’ 7”)

3,070

(10’ 1”)

2,700

(8’ 10”)

4,300 (14’ 1”)

Track shoe width

Overall width

K

L

Tumbler distance



Tail swing radius

Rear-end length




Track gauge

Ground clearance of blade up

Depth of blade down

Height of blade

A

B

C

D

D’

E

F

G

H

M

N

O

2,610 (8' 6")

3,340 (11' 0")

890 (2’ 10”)

1,500 (4’ 10”)

1,500 (4’ 10”)

2,490 (8’ 2”)

2,900 (9’ 6”)

440 (1’ 5”)

1,990 (6’ 6”)

540 (1’ 8”)

530 (1’ 8”)

580 (1’ 9”)

Boom length

Arm length

Overall length

Overall height

of boom

I

J

500

(20”)

1,960

(6’ 5”)

7,560

(24’ 8”)

2,530

(8’ 3”)

2,500

(8’ 2”)

600

(24”)

2,260

(7’ 5”)

7,580

(24’ 9”)

2,740

(9’ 0”)

2,600

(8’ 6”)

700

(28”)

2,810

(9’ 3”)

7,520

(24’ 7”)

3,070

(10’ 1”)

2,700

(8’ 10”)

4,300 (14’ 1”)

Track shoe width

Overall width

K

L

Tumbler distance



Tail swing radius

Rear-end length




Track gauge

Ground clearance of blade up

Depth of blade down

Height of blade

A

B

C

D

D’

E

F

G

H

M

N

O

2,780 (9' 2")

3,678 (12' 1")

890 (2’ 10”)

1,500 (4’ 10”)

1,500 (4’ 10”)

2,490 (8’ 2”)

2,900 (9’ 6”)

440 (1’ 5”)

1,990 (6’ 6”)

540 (1’ 8”)

530 (1’ 8”)

580 (1’ 9”)

16/17

Dimensions & Working Range

mm (ft.in)

R125LCR-9A (DOZER TYPE) DIMENSIONS

R125LCR-9A (DOZER TYPE) WORKING RANGE

D

E

B B' C

A

A'

F

A

B

D,D'

I

J

O MC

N

E

F

G

H

L

K

mm (ft.in)

Lifting Capacity

R125CR-9A Rating over-front Rating over-side or 360 degree

Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser

Load point

height

m (ft)

Load radius

1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach

m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*5690*12540*8700

*19180

*5690*12540*8700

*19180

*2850*6280*4670

*10300*5790

*12760*5970

*13160*5360

*11820

*2850*628042409350384084403730822038108400

*1780*3920*1820*4010*2300*5070*2980*6570308067902990659030306680

*1780*3920*1820*4010*2300*507021804810200044101920423019504300

*1480*3260*2090*4610200044101920423018904170

1450320014003090132029101240273012102670

*1770*39001670368014403170137030201450320017303810

*2290*5050

1530337011103420930

2050870

1920920

20301120247017303810

5.97(19.6)

6.90(22.6)

7.34(24.1)

7.41(24.3)

7.13(23.4)

6.42(21.1)

5.08(16.7)

kglbkglbkglbkglbkglbkglbkglb

R125CRD-9A Rating over-front Rating over-side or 360 degree


Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*5690*12540*8700

*19180

*5690*12540*8700

*19180

*2850*6280*4670

*10300*5790

*12760*5970

*13160*5360

*11820

*2850*6280*4670

*103004640

102304540

100104620

10190

*1780*3920*1820*4010*2300*5070*2980*6570*3560*7850*3770*8310*3430*7560

*1780*3920*1820*4010*2300*507025905710241053102320511023505180

*1480*3260*2090*4610*2370*5220*2630*5800*2660*5860

*1480*326016803700159035101510333014803260

*1770*3900*1850*4080*1940*4280*2060*4540*2180*4810*2300*5070*2290*5050

*1770*3900133029301140251010802380113024901360300020704560

5.97(19.6)

6.90(22.6)

7.34(24.1)

7.41(24.3)

7.13(23.4)

6.42(21.1)

5.08(16.7)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*6190*13650*9140

*20150

*6190*13650*9140

*20150

*3270*7210*5030

*11090*5940

*13100*5920

*13050*5210

*11290

*3270*721041409130382084203770831038808550

*1780*3920*2040*4500*2500*5510*3160*6970308067903020666030906810

*1780*3920*2040*4500237052202160476020004410940

428020004410

208045902000441019304250

139030601310289012502760

*1900*41901810399015503420148032601570346019104210

171037701210267010102230950

20901010223012502760

5.61(18.4)

6.59(21.6)

7.06(23.2)

7.13(23.4)

6.83(22.4)

6.08(19.9)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*6190*13650*9140

*20150

*6190*13650*9140

*20150

*3270*7210*5030

*11090*5940

*13100*5920

*13050*5210

*11290

*3270*72104960

109304620

101904570

100804690

10340

*1780*3920*2040*4500*2500*5510*3160*6970*3660*8070*3790*8360*3240*7140

*1780*3920*2040*4500*2500*551025705670241053102350518024105310

*2230*4920*2480*5470*2690*5930

166036601580348015203350

*1900*4190*1970*4340*2070*4560*2190*4830*2320*5110*2420*5340

*1900*4190*1450*3200*1230*2710*1160*2560*1230*2710*1510*3330

5.61(18.4)

6.59(21.6)

7.06(23.2)

7.13(23.4)

6.83(22.4)

6.08(19.9)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)

*3340*7360*5070

*11180*7380

*16270

*3340*7360*5070

*11180*7380

*16270

*3960*87305420

*11950*5920

*13050*5640

*12430*4290*9460

*3960*873038808550369081403700816038908580

*1910*4210*2640*5820309068102960653029406480

*1910*421022104870200044101880414018704120

*1620*3570*1810*3990200044101900419018404060

1480326014203130132029101220269011602560

*1550*3420142031301240273011902620124027301440317020004410

12302710920

2030780

1720730

1610760

1680900

198013002870

6.64(21.8)

7.47(24.5)

7.88(25.9)

7.95(26.1)

7.68(25.2)

7.04(23.1)

5.88(19.3)

kglbkglbkglbkglbkglbkglbkglbkglb


Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)

*3340*7360*5070

*11180*7380

*16270

*3340*7360*5070

*11180*7380

*16270

*3960*87305420

*11950*5920

*13050*5640

*12430*4290*9460

*3960*87304700

103604500992045109940

*4290*9460

*1910*4210*2640*5820*3320*7320*3680*8110*3590*7910

*1910*421026305800241053102290505022705000

*1620*3570*1810*3990*21404720

*2460*5420*2630*5800

*1620*357016903730159035101490328014303150

*1550*3420*1630*3590*1720*3790*1820*4010*1950*4300*2070*4560*2150*4740

1470324011302490970

2140920

2030960

21201120247015703460

6.64(21.8)

7.47(24.5)

7.88(25.9)

7.95(26.1)

7.68(25.2)

7.04(23.1)

5.88(19.3)


1. Lifting capacity is based on SAE J1097, ISO 10567.

2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.

4. (*) indicates load limited by hydraulic capacity.





18/19

Lifting Capacity

*

20/21

Lifting CapacityLifting Capacity

R125LCR-9A Rating over-front Rating over-side or 360 degree


Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*5690*12540*8700

*19180

*5690*12540*8700

*19180

*2850*6280*4670

*10300*5790

*12760*5970

*13160*5360

*11820

*2850*628042909460389085803790836038608510

*1780*3920*1820*4010*2300*5070*2980*6570313069003040670030706770

*1780*3920*1820*4010*2300*507022104870203044801950430019804370

*1480*3260*2090*4610203044801950430019204230

1470324014303150134029501260278012302710

*1770*39001690373014603220139030601470324017603880

*2290*5050

1550342011202470940

2070890

1960940

20701140251017603880

5.97(19.6)

6.90(22.6)

7.34(24.1)

7.41(24.3)

7.13(23.4)

6.42(21.1)

5.08(16.7)


R125LCRD-9A Rating over-front Rating over-side or 360 degree


Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*5690*12540*8700

*19180

*5690*12540*8700

*19180

*2850*6280*4670

*10300*5790

*12760*5970

*13160*5360

*11820

*2850*6280*4670

*103004710

103804600

101404680

10320

*1780*3920*1820*4010*2300*5070*2980*6570*3560*7850*3770*8310*3430*7560

*1780*3920*1820*4010*2300*507026305800244053802360520023905270

*1480*3260*2090*4610*2370*5220*2630*5800*2660*5860

*1480*326017003750161035501530337015003310

*1770*3900*1850*4080*1940*4280*2060*4540*2180*4810*2300*5070*2290*5050

*1770*3900135029801150254010902400115025401380304021004630

5.97(19.6)

6.90(22.6)

7.34(24.1)

7.41(24.3)

7.13(23.4)

6.42(21.1)

5.08(16.7)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*6190*13650*9140

*20150

*6190*13650*9140

*20150

*3270*7210*5030

*11090*5940

*13100*5920

*13050*5210

*11290

*3270*721042009260387085303820842039408690

*1780*3920*2040*4500*2500*5510*3160*6970313069003060675031306900

*1780*3920*2040*45002410531021904830203044801970434020404500

211046502030448019604320

141031101340295012702800

*1900*41901840406015703460150033101590351019404280

174038401230271010202250970

21401030227012702800

5.61(18.4)

6.59(21.6)

7.06(23.2)

7.13(23.4)

6.83(22.4)

6.08(19.9)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)

*6190*13650*9140

*20150

*6190*13650*9140

*20150

*3270*7210*5030

*11090*5940

*13100*5920

*13050*5210

*11290

*3270*72105030

110904690

103404640

102304750

10470

*1780*3920*2040*4500*2500*5510*3160*6970*3660*8070*3790*8360*3240*7140

*1780*3920*2040*4500*2500*551026105750244053802380505024505400

*2230*4920*2480*5470*2690*5930

169037301610355015403400

*1900*4190*1970*4340*2070*4560*2190*4830*2320*5110*2420*5340

*1900*41901470324012502760118026001250276015403400

5.61(18.4)

6.59(21.6)

7.06(23.2)

7.13(23.4)

6.83(22.4)

6.08(19.9)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)

*3340*7360*5070

*11180*7380

*16270

*3340*7360*5070

*11180*7380

*16270

*3960*87305420

*11950*5920

*13050*5640

*12430*4290*9460

*3960*873039408690375082703760829039508710

*1910*4210*2640*5820314069203000661029906590

*1910*421022504960203044801910421019004190

*1620*3570*1810*3990203044801930425018704120

1510333014403170134029501240273011802600

*1550*3420145032001260278012102670126027801470324020304480

12502760940

2070800

1760750

1650780

1720920

203013202910

6.64(21.8)

7.47(24.5)

7.88(25.9)

7.95(26.1)

7.68(25.2)

7.04(23.1)

5.88(19.3)



Load point

height

m (ft)

Load radius


m (ft)

At max. reach

6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)

GroundLine

-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)

*3340*7360*5070

*11180*7380

*16270

*3340*7360*5070

*11180*7380

*16270

*3960*87305420

*11950*5920

*13050*5640

*12430*4290*9460

*3960*87304760

104904560

100504570

10080*4290*9460

*1910*4210*2640*5820*3320*7320*3680*8110*3590*7910

*1910*4210*2640*5820244053802320511023105090

*1620*3570*1810*3990*21404720

*2460*5420*2630*5800

*1620*357017203790161035501510333014503200

*1550*3420*1630*3590*1720*3790*1820*4010*1950*4300*2070*4560*2150*4740

1490328011502540990

2180940

2070980

21601140251016003530

6.64(21.8)

7.47(24.5)

7.88(25.9)

7.95(26.1)

7.68(25.2)

7.04(23.1)

5.88(19.3)










Documents

STANDARD EQUIPMENT OPTIONAL EQUIPMENT O ......2/3 *Photo may include optional equipment. Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on steps