STAND ON LOW-LIFTER

ERGO ALL 200

Comfortable transfer truck. Suitable for long cycles and a heavy goods flow.

Mast Type Standard lift height H4 Min mast height Max mast height H5

Tel

esco

pic

Dou

ble

tele

scop

ic

0 Specification ERGO ALL 200

Lift

capa

citie

s

0a Straddle leg position1 Lift capacity Q kg 20001a Load centre D mm 500 - 6002 Lift height H4 mm 2052a Mast height H3/H5 mm2b Transport free lift H2 TV mast mm2c Full free lift H2 DT mast mm2d Straddle lift mm3 Mast tilt. Forward - backward3a Tilting forks. Forward - backward4 Lift speed. Without load - with load m/s4a Lift time. Without load - with load s 2,9 - 3,54b Lift speed, ergolift. Without load - with load m/s5 Lowering speed. Without load - with load m/s5a Lowering time. Without load - with load s 3,7 - 2,6

Driv

e ca

paci

ties

6 Drive speed. Without load - with load km/h 8-8 / 10-9,3Drive speed. Without load - with load m/s

6a Acceleration 0-10 mWithout load - with load s

8 Gradient, without load / with load max % 710 Turning radius R2 mm 1702 / 189211 Smallest practical stacking aisle incl 200 mm play

Load length 1200 mm Ast mm 2317Load length 1000 mm Ast mm 2117Load length 800 mm Ast mmAisle width requirement according to BITA GN9 UK market only A1 mm

A2 mmA3 mm

Smallest practical stacking aisle with pallet LL 1200 with the platform folded up/folded down

Min mm

11a Intersecting aisle width. Load length 1200 mm Min mm11c Max load length LL mm11d Max load width LB mm

Tru

ck m

easu

rem

ents

13 Height of overhead guard H6 mm13a Height of driver seat H7 mm13b Step-in height Y1 mm 23013c Floor height mm13d Width of open gate mm14 Truck length L mm L1 + 91715 Truck width B mm 94015a Width over guide wheels A mm15b Width over stabilisers S mm15c Platform length mm15d Platform width B3 mm15e Height of platform gates mm16 Fork length L1 mm 1000 / 115017 Width over forks V max/min mm 680 / 48017a Width between forks mm V -35018 Reach length U mm19 Distance from back plate to retracted fork heel L4 T-mast mm 917

Distance from back plate to retracted fork heel L4 DT-mast mm20 Fork arm, width - thickness B1 mm 175 - 5520a Fork height, lowered, max H1 mm 8521 Straddle height H8 mm22 Width between straddles B2 mm22a Width over straddles mm23 Distance between front axle and retracted fork heel L2 mm 785 / 97523a Distance between front axle and centre of attachment L2 mm23b Distance between front axle and heel of extended fork X1 mm24 Axle distance L3 mm 1507 / 169725 Wheel track, front rear (centre lines wheels) mm V-175, 64526 Ground clearance at half axle distance mm 30

Wei

ghts 27 Total weight with-without battery. kg 1450 - 750

28 Max axle pressure,fork side,without/ with classified load kg 340 / 189829 Max axle load,drive side, without/with classified load kg 1110 / 155230 Max wheel point loading, without/with classified load MPa 3,5 / 5,8

Mot

ors

39 Battery capacity kWh/Ah 11,1-18,0 / 465-75039a Battery voltage V 2441 Drive motor kW 2,4 AC42 Speed regulation Transistor43 Lift motor. Output/Interm. conn.time kW-%/min 2,2 - 12/1043a Hydraulic pressure MPa 17,5

Ste

erin

g/br

ake

syst

em

44 Wheel type, drive wheel/others Rubber/Vulcollan44a Number of wheels, drive/castor - load wheels 3 - 445 Wheel dimensions45a Load wheels - diameter x width mm (4) x 85x7545b Drive wheel - diameter x width mm (1) x 250x8045c Castor wheels - diameter x width mm (2) x 150x6046 Steering El. servo47 Service brake - Type-acting on El. - drive motor48 Parking brake - Type-acting on. Mech. - drive motor

* Varies according to battery size All rights reserved to change above specification

2015

-07-

22 U

C S

pec.

shee

ts