Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1
1
2015
STALATS AB
January 2014
Catalogue
Page 2 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Development and production of:
Professional high-quality equipment for creating concrete coverings, for grinding and polishing of concrete, terrazzo
(cement-mosaic coverings), stone and wooden foundations.
A wide range of grinding tools for fast and efficient grinding of concrete and stone foundations of different hardness
and density.
Professional range of floor sealers/impregnation, produced based on the latest world achievements in field of
mineral surface hardening and according to the strict EU quality standards. Continuous close cooperation with professional users allows permanent search of innovative technical ideas and
implementation of the best solutions into new types of equipment, tools and materials. Therefore, all our products
achieve the best performance in terms of productivity, ergonomics, reliability and durability.
Grinding-Polishing Machine GPM-240 ............................................................................................ 3
Grinding-Polishing Machine GPM-400 ............................................................................................ 5
Grinding-Polishing Machine GPM-500 ............................................................................................ 7
Grinding-Polishing Machine GPM-750 ............................................................................................ 9
Diamond Tools for Grinding Machines .......................................................................................... 11
Pads for Grinding Machines ....................................................................................................... 12
Liquid Chemical Hardeners / Sealers ............................................................................................ 13
Portable Screeds .................................................................................................................... 14
Channel and Scraper Floats ........................................................................................................ 15
Double Beam Screeds .............................................................................................................. 16
Truss Screed ........................................................................................................................ 17
Mini Screed ......................................................................................................................... 18
Spreader Wagon .................................................................................................................... 19
Concrete Floor Formwork: ω-Form ............................................................................................... 20
Concrete Floor Formwork: T-Form ............................................................................................... 21
Concrete Buckets ................................................................................................................... 22
Discs for Power Trowel Machines ................................................................................................ 23
Blades for Power Trowel Machines ............................................................................................... 24
Page 3 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Grinding-Polishing Machine GPM-240
LIGHT - PRODUCTIVE - RELIABLE - UNIVERSAL
Professional edging one-disc Grinding-Polishing Machine GPM-240 is used for grinding of uneven surfaces, polishing of concrete, terrazzo, stone, wooden surfaces on small areas. Can be used to remove old coverings, remains of glue, paint, etc. GPM-240 is convenient for operation at difficult-to-reach areas close to columns and edges, next to walls. The machine has CE Declaration of Conformity.
Model Units Working Condition
Transportation Condition
Power kW 1.5
Parameters: mm Grinding Head Control Panel
Length mm 1310 535 1270
Width mm 380 380 220
Height mm 1140 370 295
Voltage V 230
Tools Metal and resin bond diamond tools, impregnated pads, buffs, tungsten-carbide segments, sandpaper pads, etc.
Grinding disc diameter mm 1x236
Tool speed rpm 100-2000
Water tank capacity l 2.5
Weight, not more than kg 39
Page 4 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
GENERAL FEATURES: SPECIAL FEATURES FOR GPM-240:
Operation close to the wall 0mm. Rollers on the skirt protect the wall from scratching
At close-to-wall operation easy to change
from right to left side from the wall (and opposite) due to wheels axis movement
Regulation of tools rotation speed 100-2000rpm (inverter)
Soft start and operation in three regimes due to changeable speed:
o Cleaning (floor washing with shampoo and water): 200-300rpm
o Grinding: 750-1000rpm o Polishing: 1500-2000rpm
Low weight of 39kg
Small size
Unique convenient and fast magnet “quick-fix” tool system
Long life-time due to simple construction of the machine and all-metal parts
Possibility to regulate pressure for grinding or polishing
Reverse rotation of grinding disc - change in tools rotation direction
Control of tools levelness and flatness – possibility to set tools in horizontal level
Handle with regulated height and slope to ensure comfort operation
Machine’s handle protects control panel from mechanical damages
Wet grinding or washing is possible due to regulated liquid supply from the water tank (2.5l) or regulated running water supply
Dust outlet for vacuum cleaner connection
Dust-free environment due to unique system of air swirl under the grinding head, outlet for vacuum cleaner connection and quick-detachable sliding rubber skirt on the grinding head
Easily dismountable on two parts compact construction
Light-colored strong aluminum wheels do not leave marks on floor
Silent and convenient in operation Powerful projector lightning
Wide choice of tools for different purposes Pocket for spare discs and tools
Page 5 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Grinding-Polishing Machine GPM-400
LIGHT - PRODUCTIVE - RELIABLE - UNIVERSAL
Planetary Grinding-Polishing Machine GPM-400 is the most compact planetary machine in our product range. GPM-400 is used
for high-productive and effective grinding of concrete, granite, mosaic, marble, wooden (including parquet) floors as well as for
removal of old glue or paint coverings and final floor processing (polishing). The machine has EC Declaration of Conformity.
Dimension Units GPM-400
Power kW 2.2
Dimensions for transportation
Length mm 780
Width mm 490
Height mm 900
Dimensions at operation
Length mm 1010
Width mm 490
Height (handle upright) mm 900
Voltage V 230
Tools Metal and resin bond diamond tools, impregnated pads, buffs, tungsten carbide segments, sandpaper pads, etc.
Grinding disc diameter mm 180
Number of grinding discs pcs 3
Tool speed rpm 300-1350
Working width mm 430
Water tank capacity l 6
Weight kg 100
Page 6 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
GENERAL FEATURES: SPECIAL FEATURES FOR GPM-400:
Planetary and reverse rotation of flexible grinding heads guarantee excellent surface flatness
Connection to 230V voltage network allows operation inside of industrial as well as residential premises
Easy to handle due to relatively low weight and small size
Soft start, possibility to adjust tools’ rotation speed 300-1350 rpm
Unique convenient and fast magnet “quick-fix” tool system
Integrated water supply for wet grinding
Dust-free environment due to unique system of air swirl under the grinding head, two vacuum cleaner hose connectors and removable rubber skirt on the grinding head
Quick disassemble of grinding head from the control panel for easy
transportation
Unique belt tightening device allows controlling and regulating interior belt tension without disassemble of grinding head – No special device is needed to mount the interior belt
Adjustable handle height to ensure comfort operation
Long operating life due to reduced load on bearing, premium quality belt, spring steel head system and all zink-plated galvanized steel parts
Silent and convenient in operation
Possibility to regulate grinding pressure with extra weights
Wide choice of tools for different purposes
Light-colored wheels do not leave marks on marble surface
Powerful projector lightning
Page 7 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Grinding-Polishing Machine GPM-500
LIGHT - PRODUCTIVE - RELIABLE - UNIVERSAL
Planetary Grinding-Polishing Machine GPM-500 is the most universal and popular machine in our product range. GPM-500 is
used for high-productive and effective grinding of concrete, granite, mosaic, marble, wooden (including parquet) floors as well as for
removal of old glue or paint coverings and final floor processing (polishing). The machine has EC Declaration of Conformity.
Dimension Units GPM-500
Power kW 4.0
Dimensions for transportation
Length mm 1100
Width mm 590
Height mm 1150
Dimensions at operation
Length mm 1350
Width mm 550
Height (handle upright) mm 1500
Voltage V 400
Tools Metal and resin bond diamond tools, impregnated pads, buffs, tungsten carbide segments, sandpaper pads, etc.
Grinding disc diameter mm 236
Number of grinding discs
pcs 3
Tool speed rpm 300-1350
Working width mm 520
Water tank capacity l 20
Weight kg 160
Page 8 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
GENERAL FEATURES: SPECIAL FEATURES FOR GPM-500:
Planetary and reverse rotation of flexible grinding heads guarantee excellent surface flatness
The most popular machine, which can be used on average and large areas
Soft start, possibility to adjust tools’ rotation speed 300-1350 rpm
Unique convenient and fast magnet “quick-fix” tool system
Integrated water supply for wet grinding
Dust-free environment due to unique system of air swirl under the grinding head, two vacuum cleaner hose connectors and removable rubber skirt on the grinding head
Quick disassemble of grinding head from the control panel for easy
transportation
Unique belt tightening device allows controlling and regulating interior belt tension without disassemble of grinding head – No special device is needed to mount the interior belt
Adjustable handle height to ensure comfort operation
Long operating life due to reduced load on bearing, premium quality belt, spring steel head system and all zink-plated galvanized steel parts
Silent and convenient in operation
Possibility to regulate grinding pressure with extra weights
Wide choice of tools for different purposes
Powerful projector lightning
Page 9 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Grinding-Polishing Machine GPM-750
EFFICIENT - PRODUCTIVE - RELIABLE - UNIVERSAL
Planetary Grinding-Polishing Machine GPM-750 is the largest and the most productive machine in our product range. GPM-750
is used for high-productive and effective grinding of concrete, granite, mosaic, marble, wooden (including parquet) floors as well as
for removal of old glue or paint coverings and final floor processing (polishing). The machine has EC Declaration of Conformity.
Dimension Units GPM-750
Power kW 11.0
Dimensions for transportation
Length mm 1240
Width mm 820
Height mm 1250
Dimensions at operation
Length mm 1600
Width mm 820
Height (handle upright) mm 2270
Voltage V 400
Tools Metal and resin bond diamond tools, impregnated pads, buffs, tungsten carbide segments, sandpaper pads, etc.
Grinding disc diameter mm 260
Number of grinding discs
pcs 4
Tool speed rpm 300-1350
Working width mm 750
Water tank capacity l 20
Weight kg 320
Page 10 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
GENERAL FEATURES: SPECIAL FEATURES FOR GPM-500:
Planetary and reverse rotation of 4 flexible grinding heads guarantee excellent surface flatness
The most productive machine due to 4 grinding discs
Soft start, possibility to adjust tools’ rotation speed 300-1350 rpm
Unique convenient and fast magnet “quick-fix” tool system
Integrated water supply for wet grinding
Dust-free environment due to unique system of air swirl under the grinding head, two vacuum cleaner hose connectors and removable rubber skirt on the grinding head
Quick disassemble of grinding head from the control panel for easy
transportation
Unique belt tightening device allows controlling and regulating interior belt tension without disassemble of grinding head – No special device is needed to mount the interior belt
Adjustable handle height to ensure comfort operation
Long operating life due to reduced load on bearing, premium quality belt, spring steel head system and all zink-plated galvanized steel parts
Silent and convenient in operation GPM-750 can be optionally equipped with extra weights to
regulate grinding pressure
Wide choice of tools for different purposes
GPM-750 has long extended removable handle for convenient machine control
Powerful projector lightning
Page 11 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Diamond Tools for Grinding Machines
Diamond tools are used as expendables to grinding machines to take off the surface layer of concrete, stone, wood and
other foundations. Diamond tools consist of a metal plate with soldered on it diamond or carbide segments.
Tools specification consists of:
1. Segment form: R (rectangular), C (circle). Clarification: the more sharp edges there are in the segments, the
rougher and the more aggressive (more productive) is surface grinding, and the more the segments hold against
the load impact. The fewer edges, as for example in case of circle segments, the fewer scratches are left on the
surface.
2. Bond type in the segment: S (soft bond for hard concrete), N (normal bond for medium concrete), H (hard
bond for soft concrete). Clarification: the softer the concrete, the harder bond is recommended, and vice-versa.
For very soft concrete and sand-cement coverings, tungsten carbide (TC) tools are recommended.
3. Segments quantity: number from “1” to “2”. Clarification: the smaller the total working area of segments, the
more the pressure on the processed foundation, and consequently the more aggressive and productive the
grinding, but the less the segments lifetime (fast wear).
4. Grain size in grit: number from “16” to “150”, which corresponds to the numbers: 16 grit – black, 30 grit –
brown, 60 grit – grey, 100 grit – yellow, 150 grit – white. Clarification: the larger the diamond grain (the smaller
the grit number), the more aggressive and productive is surface grinding.
The correct choice depends on:
1. Surface flatness – the choice on load impact. Rectangular segments are more preferable.
2. Porosity of concrete foundation – the choice of the number of segments. Larger amount of segments is more
preferable.
3. Hardness of concrete foundation – the choice of segment bond. Soft bond is more preferable for hard
foundations, and vice-verse.
4. Required surface roughness – the choice of segment form and grit. Circle segments with small grains 150 grit
are more preferable for even foundations.
Diamond tools have 2 types of fastening, adapted for all trapezoid-form plates: three screwed holes, and additionally three plain
holes for pins to fix on magnet tool discs.
As an example, diamond tools are classified according to the number of segments and its form as following:
Number of segments / Segment Form
R (rectangular) C (circle) Price
«1»
«2»
Page 12 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Diamond tools are classified according to grit and bond as following:
Diamond Tools for Grinding for GPM 240/400/500/750 Grit / Colour soft concrete normal concrete hard concrete Application
grit 16 / Black
RH 2-16
RN 1-16
RN 2-16
RS 1-16
RS 2-16 very coarse grinding
grit 30 / Brown
RH 2-30
RN 1-30
RN 2-30
RS 1-30
RS 2-30 coarse grinding
grit 60 / Grey
RH 2-60
RN 1-60
RN 2-60
RS 1-60
RS 2-60 medium grinding
grit 100 / Yellow
RH 2-100
CN 1-100
CN 2-100
CS 1-100
CS 2-100 fine grinding
grit 150 / White -
CN 1-150
CN 2-150
CS 1-150
CS 2-150 super-fine grinding
hard - "H" normal - "N" soft - "S"
Metal-Bond Type
Tungsten-carbide (TC) / Beige
for cement-sand coverings
Pads for Grinding Machines
Pads are used as expendables for grinding and polishing machines for finish processing of concrete, stone, wooden and
other surfaces after processing with diamond tools, by gradually increasing surface shine.
Pads, abrasive cloth, felted circles, and Tool Holders are Velcro-backed with fabric “hook-and-loop” that provides an
easy and quick tool changing.
The larger the number, indicating pad or other tool number, the less is abrasive grit, and it corresponds to obtaining
higher surface shine.
Specification Picture Price
Polishing pads for concrete and stone ø 80mm & 12mm thickness: 100/200/400/800/1500/3500 grit
Page 13 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Liquid Chemical Hardeners / Sealers Name Description Price, €
SPEKTRIN® Hardener – Crystallizer based on organosilicon
Solids – 11%
SPEKTRIN® - penetrating hardener for concrete, terrazzo concrete from 14 days old and stone. Penetrates into the foundation at 4 mm, consolidates, hardens and dust-binds. Increases compression strength of the concrete by as much as 25%, resistance to freeze-thaw cycles, abrasion resistance about 2.5 times why virtually all abrasion dust is eliminated 100%. Increases the resistance to dirt why makes cleaning easy. Easy and cost effective to apply. Zero-VOC, non-flammable, no odour, and safe to use. Treated area can easily be polished until the needed glance level. For use both indoors and outdoors. The product has CE-Marking. Spreading rate: Normally 8 m2/litre on power-floated surface: 12 m2/litre.1
/ ltr.
SPEKTRIN® PLUS Hybrid Hardener / Sealer
based on organosilicon and resin polymer
Solids - 16%
SPEKTRIN® PLUS – penetrating hardener / sealer, modified with 100% polymer resin with a special surfactant for fresh and old concrete. Has all the qualities of SPEKTRIN®, but also creates a curing membrane for even hardening of fresh concrete. After reaction it cannot peel or flake from substrate. Completely eliminates dust, decreases water penetration by 5 times. Increases the resistance to dirt why it makes cleaning easy. Especially efficient on soft concrete and sand-cement foundations. Transparent after drying. The product has CE-Marking. Spreading rate: Normally 8 m2/litre. on power-floated surface: 12 m2/litre.6
/ ltr.
SPEKTRIN® LITHIUM Deep-Penetrating
Hardener based on lithium silicate
Solids 20%
SPEKTRIN® LITHIUM – deep-penetrating hardener with high content of lithium component. Has all qualities of SPEKTRIN®, but due to the lithium basis penetrates into foundation at 5 mm and deeper. Has much faster reaction time. Accepts pedestrian traffic after 1-2 hours and light vehicles after 24 hours. The most suitable hardener for polished concrete installation. Creates high gloss level at the surface. Recommended for hard and tightly trowelled concrete. The product has a CE-Marking. Spreading rate: Normally 8 m2/litre. on power-floated surface: 12 m2/litre.6
/ ltr
SPEKTRIN® LITHIUM PLUS
Deep-Penetrating Hybrid Hardener / Sealer
Solids 24%
SPEKTRIN® LITHIUM PLUS – deep-penetrating hardener / sealer with high content of lithium component, has all qualities of SPEKTRIN® LITHIUM, but also creates a curing membrane for even hardening of fresh concrete. Due to the lithium as base material, penetrates deeper into the foundation. Transparent when dry. Recommended for hard and tightly trowelled concrete, also as a final sealing layer in polished concrete technology. The product has a CE-Marking. Spreading rate: Normally 8 m2/litre. on power-floated surface: 12 m2/litre.6
/ ltr
SPEKTRIN® CLEANER
Concentrated cleaner based on colloidal silica
SPEKTRIN® CLEANER – is a superior waterborne concentrated heavy-duty slightly basic (alkaline) surface cleaner that removes dirt, grease, grime, oil, mildew and algae stains from almost any substrate. Especially excellent on mineral substrates such as concrete and marble as it fortifies its strength with each cleaning. Perfect for polished concrete as it continues to densify over time, creating a harder low-maintenance floor. On polished concrete floors it also maintains the gloss. For use both indoors and outdoors. The product has a CE-Marking. Spreading rate: For regular cleaning use concentration 0.7-2%. For very heavy duty cleaning use concentration 2.5-10%. Normally 5 m2/litre.of ready to use solution.
/ ltr
Pro Urethane Acrylic Sealer WB / Polyurethane water-based vanish – film-forming water-dispersion hybrid urethane-acrylic varnish for mineral and wooden foundations. The acrylic makes the adhesion, and the urethane makes the hardness. The material forms crystal clear surface. Creates high gloss on the surface. For use both indoor and outdoor. Spreading rate: 5-15 m2 / litre.
/ ltr.
Pro Colorant concentrated colorant – colorant for SPEKTRIN® and SPEKTRIN® LITHIUM hardeners, highly resistant against alkaline, weather and UV-light. Added to hardeners in amount of 5-10%. Ecological and anti-allergic properties. Zero VOC (Volatile Organic Compounds) and non-toxic, and therefore safe to use. Colors according to RAL: Pure White (9010), Golden Yellow (1004), Brown Beige (1011), Copper Brown (8004), Beige red (3012), Pastel Blue (5024), Pastel Green (6019), Pebble grey (7032), Slate Grey (7015), Jet Black (9005). Other colors should be checked in advance.
/ kg
1 May vary depending of porosity of substrate.
Page 14 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Portable Screeds
LIGHT - RELIABLE - MANEUVERABLE - UNIVERSAL
Portable Screed Electric (PSE) and Portable Screed Petrol (PSP) are used for compaction and smoothing of
concrete slab both on form-work and without guiding rails. Portable screeds have easy-to-change replaceable blades that
allow working in difficult to reach places.
Model PSE PSP
Engine Electric – 230 V / 42 V Petrol Honda GX 35
Weight without blades, kg 13 14
Power, kW 0.19 1.1
Width, mm 600 850
Height, mm 1100 1100
Blade length, m 1.0; 1.5; 2.0; 3.0; 4.0; 5.02
Vibration penetration into concrete mix, mm
70…100 100…120
Blade material aluminium
Price, €
Features:
Strong and light steel wear-resistant frame
Ergonomic handles, isolated from vibration
Easy-to-change rigid blades
PSP engine is highly lifted over concrete surface that
protects it from dirt
PSE 220 V is safe and convenient for in-door operation
Used for concrete slab up to 120 mm depth
Easy to disassemble for transportation
Convenient in operation speed control and alarm switch
Blades are available in several lengths
Ref. Picture Price
1.0 m Aluminium blade 1.5 m Aluminium blade 2.0 m Aluminium blade 2.5 m Aluminium blade 3.0 m Aluminium blade 3.5 m Aluminium blade 4.0 m Aluminium blade 5.0 m Aluminium blade
2 Non-standard blade lengths can be produced upon request
Page 15 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Channel and Scraper Floats LIGHT - RELIABLE - EASY-TO-USE ON LARGE AREAS
Channel Float (CF) is used to flatten and slightly correct concrete surface by adjusting the angle of attack up to 30 degrees and
operating area length up to 7 meters. Scraper float (SF) is used to control floor flatness, to eliminate hillocks and to fill
dimples on concrete surface. The possibility to gradually change the angle of attack by rotating the handle simplifies the usage of
the float.
Dimensions, m Weight, kg
CF SF CF SF
Blades 1.0 1.0 1.38 2.20
1.5 1.5 2.11 3.29
2.0 2.0 2.84 4.41
2.5 2.5 3.56 5.50
3.0 3.0 4.28 6.59
3.5 7.68
4.0 8.77
4.5 9.86
5.0 10.90
5.5 12.04
6.0 13.10
Standard handle 3.03 1.42
Extender for standard handle 3.04 1.53
Material aluminium
Features: Blades are made of light and strong special aluminium
Unique simple reducer done on basis of stainless cable wire
Opportunity to install a stabilizer to keep rigidity of blades longer than 1.5 m
Long handle (3-6m) to increase the processed area
No toothed coupling in the construction increases product life time
Wide range of offered blades, handles and float extenders greatly expand tool application area.
Ref. Specification Picture Price
Channel Float (CF) = blade + reducer + handle ± extender 1.0 m blade + reducer Blade 1.0 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm;
1.5 m blade + reducer Blade 1.5 x .015 x 0.025 m. Reducer 225 x 150 x 132 mm; 2.0 m blade + reducer Blade 2.0 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm; 2.5 m blade + reducer Blade 2.5 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm; 3.0 m blade + reducer Blade 3.0 x 0.15 x 0.025 m. Reducer 225 x 150 x 132 mm;
Scraper Float (SF) = blade + reducer + handle ± extender 1.0 m blade + reducer Blade 1.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm
Blade 1.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm
1.5 m blade + reducer 2.0 m blade + reducer
Blade 2.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm
2.5 m blade + reducer Blade 2.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 3.0 m blade + reducer Blade 3.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 3.5 m blade + reducer Blade 3.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 4.0 m blade + reducer Blade 4.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 4.5 m blade + reducer Blade 4.5 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 5.0 m blade + reducer Blade 5.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm 6.0 m blade + reducer Blade 6.0 x 0.4 x 0.1 m. Reducer 225 x 150 x 132 mm
3.0 m handle 3.0 m extender
3 Other handle lengths (1.0 m, 1.5 m, 2.0 m) can be produced upon request 4 Other extender lengths (1.0 m, 1.5 m, 2.0 m) can be produced upon request
Page 16 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Double Beam Screeds
POWERFUL - EASY TO USE - RELIABLE - UNIVERSAL
Double beam Screed Electric (DSE) and Double beam Screed Petrol (DSP) are used for compaction and
smoothing of fresh concrete slab up to 200 mm thick. Directional and adjustable vibration as well as adjustable beam
deflection makes concrete flat and plain.
Model DSE DSP
Engine Electric-400 V / 42 V Petrol 95, Honda GX 160
Standard lengths, m 3.15; 4.25; 5.25; 6.25; 7.25*; 8.25*; 9.25*; 10.25*5
Weight depending on standard lengths, m
73; 76; 85; 92 78; 87; 94; 101
Engine weight, kg 19 15.1
Power, kW 0.55 4.0
Width, mm 450
Height, mm 355 555
Beam height, mm 120
Vibration penetration into concrete mix, mm
200…250
Beam material aluminium
Features:
Produced of light special aluminium
Regulated direction and power of vibration
Adjustable tensioning rods
Reversible direction of screed movement
Equipped with special pull handles and straps
Drive unit can be placed on different beam lengths
Optimal weight to be used by two operators
Curved in the middle profile to compensate for vibrator weight
Ref. Specification Picture Price
DSE 3.15m: Double beam Screed Electric
400V/42V; 0.55kW; 73kg; vibration depth 220mm
DSE 4.25m: Double beam Screed Electric
400V/42V; 0.55kW; 76kg; vibration depth 220mm
DSE 5.25m: Double beam Screed Electric
400V/42V; 0.55kW; 85kg; vibration depth 220mm
DSE 6.25m: Double beam Screed Electric
400V/42V; 0.55kW; 92kg; vibration depth 220mm
DSP 3.15m: Double beam Screed Petrol
Honda GX160; 4kW; 78kg; vibration depth 250mm
DSP 4.25m: Double beam Screed Petrol
Honda GX160; 4kW; 87kg; vibration depth 250mm
DSP 5.25m: Double beam Screed Petrol
Honda GX160; 4kW; 94kg; vibration depth 250mm
DSP 6.25m: Double beam Screed Petrol
Honda GX160; 4kW; 101kg; vibration depth 250mm
5 * Can be produced upon request.
Page 17 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Truss Screed
UNIVERSAL – EFFICIENT – MOBILE
Truss Screed (TS) is designed for vibrating and consolidation of newly placed concrete up to 300mm thick where critical
flatness is desired. The bolted construction throughout the screed sections allows fast assembly without special tools. The
T-bolt adjuster provides quick and precise flatness adjustment.
Applications: Industrial and civil projects (any projects where high productivity of industrial floor placing is needed:
warehouses, shopping centers, production areas, etc.); Roads and highway projects (productive placement of wide
concrete slabs with exclusive quality standards – bridges, overhead roads, highways, landing strips, etc.)
Features:
Universal: suitable to obtain surface with adjusted flatness in several sectors by length Efficient: changeable length of operating area (from 3 to 24 m) due to different sections’ length Fast assemble and disassemble
Regulating of vibration speed due to frequency converter.
Data / Model TS
Dimensions:
Height (by hoist), mm 1050
Length of operating width, m 3…24 with step of 0.5
Maximum power, kW 2.2
Current frequency (regulated vibration), Hz 20…60
Components weight
Side section with hoist 0.13 m x 2 pcs. 32.0 (2p.)
Section 1m / 1.5m / 2m / 3m 23.0 / 32.0 / 37.0 / 50.0
Vibro-platform 0,18 kW per 2m length 13.5
Inverting Control panel 11.5
Protection level IP 66
Page 18 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Mini Screed
PRODUCTIVE - EASY TO OPERATE - CONVENIENT FOR LARGE AREAS
Mini screed (MS) is used for vibration and leveling of wet concrete slab to achieve smooth and flat surfaces.
Model Mini screed (MS)
Engine Electric-230V/42 V
Power, kW 0.19
Blade length, m 1.5; 2.0; 2.56
Weight depending on blade length , kg
16.0; 17.8; 19.9
Width, mm 220
Height, mm 320
Handle length, m 3
Blade material aluminium
Features:
Possible to process and correct concrete floor flatness on the distance up to 7 m
Adjustable angle of attack up to 15 degrees
Effectively removes laitance from concrete surface
Ref. Specification Price
MS 1.5m: Mini Screed electric with 1.5m blade 230V/42V; 0.19kW; handle length 3m MS 2.0m: Mini Screed electric with 2.0m blade 230V/42V; 0.19kW; handle length 3m MS 2.5m: Mini Screed electric with 2.5m blade 230V/42V; 0.19kW; handle length 3m
6 Non-standard blade lengths can be produced upon request
Page 19 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Spreader Wagon
EFFECTIVE - UNIVERSAL - MULTIFUNCTIONAL
Spreader wagon (SW) provides even scattering of topping material on wet concrete surface to achieve homogeneous in
color and durability floor surface.
Model SW 1000
Weight, kg 45
Material capacity, kg 100
Width general, mm 1060
Width operating, mm 1000
Height, mm 1126 ± 50
Length, mm 990
Features:
Regulated discharge of topping per sq. m.
Improved reliability due to spherical bearings
For SW-800 the wire drum is shifted relative to
the bunker that allows topping from the bunker
to fall down straight on the floor
For SW-1000 wide pneumatic wheels do not
leave track on fresh concrete
For SW-1000 manual blocking device for one or two wheels with the drum for even material scattering
For SW-1000 high maneuverability due to possibility to unlock the wheels from the drum.
Ref. Specification Picture Price
SW-1000: Spreader Wagon 1000 mm working width
Working width 1000 mm, ripper and wide pneumatic wheels, loading capacity 100 kg
Page 20 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Concrete Floor Formwork: ω-Form
STRONG - RIGID - RELIABLE
Omega-Form represents a formwork for concrete floors with an expansion joint. Omega-Form sets upper level of floor
surface, allows joining a cut-off concrete slab with a newly created one, prevents vertical and horizontal movement of
concrete slabs one relative another, forms expansion joints, and protects floor edges from destruction.
Model Height, m Length, m Metal thickness, m Price
ω – Form 0.12 2.4 / 3 2.5 / m.
Staple / pcs.
Wedge-bar / pcs.
Bearing Screw / pcs.
Metal framing / pcs.
Metal joint / pcs.
Features:
Protects from concrete floor edge destruction
Best steel quality
Light weight
Reusable accessories
Easy to set up
Prevents vertical and horizontal movement of concrete slabs
An option with noncorrosive edges:
Description of ω-Form Setting
1. Omega-form.
2. Staple used to connect omega-form to the bearing screw (4), which
places omega-form into the vertical position.
3. Wedge-bar used to tightly fix the connection “staple-bearing screw”.
4. Bearing screw regulates omega-form level (floor level).
5. Metal framing used to connect two neighboring concrete slabs.
Flexible coupling allows slight movement of neighboring concrete
slabs along omega-form movement joint line.
a. Metal joint used to connect two neighboring concrete slabs.
6. Outside and inside forms are placed moved one relative another by
step multiple to the square slots.
Page 21 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Concrete Floor Formwork: T-Form
SIMPLE - CONVENIENT - EFFECTIVE - CHEAP
T-form is used to set upper level of floor surface and to plan expansion joints, especially with surface leveling and at
concrete floor edges. It can be used as a leave-in-place screed rail for all types of floors.
Model Height (H), mm Length (L), mm Metal thickness (S), mm Price/m,
T-30 30 3000 (2500) 0.5 ÷ 0.55
T-45 45 3000 (2500) 0.65 ÷ 0.7
T-60 60 3000 (2500) 0.75 ÷ 0.8
Features: Allows meeting tolerance and leveling requirements on large area floors
Forms movable concrete slab joints.
Allows forming angled surfaces and acts as an interface between concrete slabs
No surface deformation from working screeds
Special perforation holes allow using steel reinforcement to prevent lifting of neighboring concrete slabs
Minimizes crack formation
Description of T-Form Setting
1. Drive reinforcement pins of 8 mm diameter into the ground with the
distance in between from 750mm to 1200 mm, height minus 20mm from
intended floor level, with accuracy ± 10mm. Height of pin entry into the
ground depends on ground density and varies from 500 mm (sand) to 50 mm
(concrete). In case of concrete, entry height should not be limited (see picture 1).
2. One by one bend out reinforcement pins into opposite sides, and put T-form
on them.
3. After setting T-form level with a leveling instrument, attach with electric
welding to reinforcement pins (see picture 2).
4. It is possible to place T-forms on concrete hillocks (see picture 3).
5. Connect T-forms between each other with an electrode of 4 or 3 mm
diameter (see picture 4). It makes rigid-joined framework and single surface
level without any steps.
6. Pour concrete.
7. After concrete setting, it is possible to pour topping on the surface to prevent
T-forms from external exposure (water) and to eliminate metal
corrosion (see picture 5).
8. Next day it is possible to start cutting expansion joints. Joints can
be at once filled in with sealant (see picture 6).
9. Sealant is well-fixed on the top of the T-form because the hole
from the cutoff disc is smaller than the T-form width by
0.25 – 1.0 mm. That is why sealant does not go above floor surface.
10. If topping is not used, it is necessary to cut concrete with a cutoff disc,
which is wider than T-form top (see picture 6), and to fill in the hole with
sealant. It prevents T-form from corrosion.
11. When grinding the floor with grinding machines,
the upper part of the profile is grinded and filled
in inside the profile with sealant and then,
if necessary, grinded again.
Page 22 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Concrete Buckets
LIGHT - CONVENIENT - SAFE - COMPACT - TROUBLE FREE
Concrete Bucket (CB) and Lay-down Concrete Bucket (LCB) are used for transportation and unloading of concrete
as well as for convenient filling of concrete floors and columns in monolithic construction process. Lay-down Concrete
Bucket (LCB) has lowered height of concrete loading in horizontal position (see picture below), which allows easy and
direct loading from concrete trucks.
Model CB-1 CB-1.5 CB-2 LCB-01 LCB-1.5
Capacity, m3 1.0 1.5 2.0 1.0 1.5
Length, mm 1546 1546 1546 1546 1546
Width, mm 1546 1546 1546 1546 1546
Height, mm 1880 2147 2481 2390 2450
Weight, mm 240 275 325 290 320
Height of concrete loading, m 1.88 2.15 2.48 1.10 1.10
Features:
Easy to regulate chute gate (with a lever)
Special lock prevents chute gate from spontaneous
opening
Chute gate lever location allows easy and comfortable
bucket operation. The operator can see where concrete is
poured
Stable in vertical and horizontal positions
It is possible to install electric engine on the cone of the bucket for hard and dry mixes as well as a
rubber elephant trunk to pour into difficult-to-reach areas.
Ref. Specification Price
CB-1.0 (Metal Chute) / CB-1.0 (Rubber Hose)
Capacity 1 m³; 220 kg;
CB-1.5 (Metal Chute) / CB-1.5 (Rubber Hose)
Capacity 1.5 m³; 270 kg; loading height 2.15 m
CB-2.0 (Metal Chute) / CB-2.0 (Rubber Hose)
Capacity 2.0 m³; 378 kg; loading height 2.5 m
LCB-1.0 (Metal Chute) / LCB-1.0 (Rubber Hose)
Capacity 1m³; 310kg; loading height 1.1m
LCB-1.5 (Metal Chute) / LCB-1.5 (Rubber Hose)
Capacity 1.5m³; 346kg; loading height 1.1m
Page 23 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Discs for Power Trowel Machines7
Discs are used as expendables for power trowel machines for initial trowelling of surface layer of concrete or sand-
cement foundation. Discs of different size and form are produced of special cold-rolled steel for all existing types of
power trowel machines.
Diameters: 610mm, 760mm, 800mm, 840 mm, 915mm, 945mm, 950mm, 980mm, 1080mm, 1200 mm
7 Due to continuous change in machines’ construction, fitness of discs to the machine should be double-checked.
Page 24 out of 24
Stalats AB Tel: +46700390087 P.O. Box 885 E-Mail: [email protected] S-101 37 Stockholm Web: www.stalats.com
Blades for Power Trowel Machines8
Blades are used as expendables for power trowel machines for finish processing of upper level of fresh concrete or sand-cement
surface. Blades are produced of special spring cold-rolled hardened steel. Blades have three modifications: finish, combo and float as
well as different forms and sizes for all existing power trowel machines.
Specification: [blade length] – [blade width] / [fixture size]
Machine / Blades
Finish blades
S230-120/16-16 S267-152/16-16 S355-152/16-16 S457-152/16-16
Weight, kg / 4 blades 2.30 3.75 4.50 6.50
Price, / 4 blades
ALLEN, USA 430 436; 900 446 (1200)
BARIKELL, Italy Moskito 60 MK8-75 4-90; MK8-90; MK8-90HCS 4-120; MK8-120
BARTELL, Canada B424 B430; BXR830 B436; TS78; BXR836 B446; TS96
BELLE, Great Britain Pro 600 Pro 900 Pro 1200
B-MAC, Belgium BM60/4 BM 955 BM1200
BTC, Italy BTC 424
DYNAPAC, Sweden BG21 BG92
ENAR, Spain Tifon 600; P600E Tifon 900 Tifon 1200
IMER, Italy Delta 60 Delta 120
KREBER, Poland K-600; K-600 R/4 K-750 K-446; K-446-2
MASALTA, China MT24-4 MT30-4 MT36-4 MT46-4
NTC, Czech Republic PT 600 PT 900 PT 1200
OSCAR, Turkey P600 P700; P750; P750 x 2 P900 P1200; P1200 x 2
SHATAL, Israel ST 62 ST92 ST-122
STONE, USA CF-24 CF-36; CF-364 CF-464
WACKER, Germany CT24 CT30 CT36 CT48
WEBER, Germany PG 55 PG 70
WHITEMAN, Canada C series M series B series
8 Due to continuous change in machines’ construction, the fitness of discs to the machine should be double-checked.