Particular characteristics:top-rate hulling capacity on account of a six-armed cross beater rotating in a perforated hulling drum pressure-free,"cool" hulling diminishing the risk of breakage perfect separation of hulls and coffee by means of large-sized aspiratorhigh resistance even with not perfectly dried coffee integrated un-hulled cherry extraction system by means of aswinging screen; finest hulling results even with high percentage of small cherries; return for renewed hulling via inputelevator low energy consumption top quality hulling knives, low on abrasion, easy to adjust, quadruple use by inversiontwo-piece hulling drum, mistake-proof fitting, made of low-abrasion sheet steel with special perforations and in-dentations individual drive for each component thus avoiding interference machine delivered completely wired thusfacilitating machine, main connection.

SSM 500The same machine as described above but without the cherry separator. This model is used for increased pre-hullingcapacity of dry parchment coffee. The output of the SSM 500 could be polishing by the polishing machine such as theHANSA SM 14 model. The cherry separator is also available as an independent unit, namely, the two-way gravityseparator "S 1 ", which is used in a conventional hulling plant.

SSM 510A new generation of hulling machine, that makes a perfect hulling of dry coffee cherries possible. A sturdy, all-steelconstruction with sealed, life-time lubricated ball-bearings. The few susceptible parts to wear can be replaced easilywithout dismantling the machine and are available at reasonable prices. Normally, the machine is fed by a cup-and-beltelevator selected from our range of models. However, if silo feeding is preferred then a dosing and feeding screwconveyor may be supplied on demand.

Cimbria HEID GmbHHeid Werkstrasse 42000 Stockerau - AustriaTelefon: (43) 2266-699-0Telefon: (43) 2266-699101Telefax: (43) 2266-65590e-mail : heid@cimbria.at – wbo@cimbria.atInternet: www.cimbria.com or www.cimbriakaack.com

Cross Beater Coffee Huller

SSM 510

SSM 500

Technical data Données techniques SSM 500 SSM 510Capacity CapacitéDry cherry coffee Café en cerises sèches 1800-2700 kg/h 1800-2700 kg/hDry parchment coffee Café séché en parches 2500-3000 kg/h 1700 kg/hPower required Puissance requise 10 kW 10 kWWeight gross/net Poids brut/net 780 / 530 kg 1000 / 800 kgShipping space Cubage 3,6 m3 5,3 m3

Cimbria HEID GmbHHeid Werkstrasse 42000 Stockerau - AustriaTelefon: (43) 2266-699-0Telefax: (43) 2266-65590e-mail : heid@cimbria.atInternet: www.cimbria.com or www.cimbriakaack.com

Cross Beater Coffee Huller SSM 510 / SSM 500