Installation Guide PSP Installation

Rev. 1.00 SRP-350plusII SRP-352plusII

http://www.bixolon.com

PSP Installation

Rev. 1.00 - 2 -

■ Table of Contents 1. Manual Information........................................................................................................3 2. Operating Environment .................................................................................................4

2-1 Installation Environment .............................................................................................4 2-2 Operating Environment...............................................................................................4 2-3 Supported Interface ....................................................................................................4

3. Installing and Deleting...................................................................................................5

3-1 Installation ..................................................................................................................5 3-2 Uninstallation ..............................................................................................................8

4. Port Setting Wizard........................................................................................................9

4-1 Automatic Installation for Serial / Parallel / USB .........................................................9 4-2 Ethernet Automatic Installation .................................................................................11 4-3 Manual Installation....................................................................................................13 4-4 Default Value Installation ..........................................................................................14

5. Running PSP Launch ..................................................................................................15 6. Caution .........................................................................................................................15

PSP Installation

Rev. 1.00 - 3 -

1. Manual Information This manual provides the information for installing PSP (POS Software Package) software of BIXOLON. You can use Windows Driver, OPOS Driver, JavaPOS Driver, Linux Driver, Virtual Com Driver, and various utility software provided by SRP-350plusII/352plusII using this software. Terms are defined as follows in this manual.

- OPOS: OLE for Retail Point of Sale - JavaPOS: Java Point of Sale - JDK: Sun Microsystems Java Development Kit - JRE: Sun Microsystems Java Runtime Environment

[Reference Sites] http://monroecs.com/opos.htm: OLE for Retail POS Committee http://www.javapos.com: Java POS Committee http://java.sun.com: Java Official Home Page http://www.bixolon.com: Driver Update We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice.

PSP Installation

Rev. 1.00 - 4 -

2. Operating Environment 2-1 Installation Environment This software can be installed on the following operating systems.

- Windows 2000 - Windows XP (32bits/64bits) - Windows 2003 Server (32bits/64bits) - Windows 2008 Server (32bits/64bits) - Windows VISTA (32bits/64bits) - Windows 7 (32bits/64bits)

2-2 Operating Environment Operating environments for each Driver and Utility are as follows.

Classification Windows Driver

OPOS Driver

JPOS Driver

Linux Driver

Virtual Com Driver Utilities

Windows 2000 O O O X O O

Windows XP (32bits) O O O X O O

Windows 2003 (32bits) O O O X O O

Windows Vista (32bits) O O O X O O

Windows 7 (32bits) O O O X O O

Windows XP (64bits) O O X X X O

Windows 2003 (64bits) O O X X X O

Windows Vista (64bits) O O X X X O

Windows 7 (64bits) O O X X X O

Linux Kernel 2.4.18-14 X X X O O X

* Java environment of JPOS Driver is JRE (Java Runtime Environment) Version 1.5 or

higher. * Linux Drivers supports Kernel Version 2.4.18-14 or higher.

2-3 Supported Interface This product can be used with the following interfaces.

- Serial (RS232) - Parallel - USB - Ethernet

PSP Installation

Rev. 1.00 - 5 -

3. Installing and Deleting BIXOLON PSP includes Windows Driver, OPOS Driver, JavaPOS Driver, Linux Driver, Virtual Com Driver, PSP Launcher, and Utility. 3-1 Installation 1) Execute ”SRP350plusIIPSPInstall Vx.x.x”. 2) “Welcome” dialogue box will be displayed.

3) Agree the software license.

BIXOLON considers that you agree to the license when you install this software.

PSP Installation

Rev. 1.00 - 6 -

4) Select the installation elements. Default installation location is as follows. “C:\Program Files\BIXOLON\SRP350plusIIPSP\”

* “Utilities” is a mandatory installation element. 5) Installation preparation window will appear.

PSP Installation

Rev. 1.00 - 7 -

6) Installation progress will be displayed.

7) Additional installation procedures will be carried out depending on the selection of

installation elements. * If Windows Driver is selected, Port Setting Wizard will be invoked during the installation

process. Refer to the next chapter for more details.

PSP Installation

Rev. 1.00 - 8 -

3-2 Uninstallation You can select the SRP-350plusII POS Software Package” from the “Add/Remove Programs” in the Control Panel or use “BIXOLON\SRP-350plusII POS Software Package \Uninstaller” in the Start Program Menu to remove the software. 1) Click the Start Menu->All Programs->BIXOLON->SRP-350plusII POS Software

Package ->Uninstaller. 2) After choosing the “Remove” button, Click “Next” button to start the deleting process .

* If the Windows Driver was installed, Windows Driver Uninstaller will be invoked during the uninstallation process.

PSP Installation

Rev. 1.00 - 9 -

4. Port Setting Wizard You can configure the port settings and install or add Windows Driver with the configured port settings using “Port Setting Wizard”. You can choose Automatic/Manual/Default Value Installation depending on the installation method. 4-1 Automatic Installation for Serial / Parallel / USB 1) Connect the printer to the computer, and turn on the power. 2) Select “Serial/Parallel/USB Auto Search and Configuration” from the Port Setting Wizard

Step 1.

3) Click the “Next” button and printer searching will start.

* Port searching ranges are as follows. - Serial: COM1~COM9

- Parallel: LPT1~LPT4 - USB: Plug&play

PSP Installation

Rev. 1.00 - 10 -

4) When the port searching is completed, select the corresponding printer in the “Search Result” and click the “Next” button.

5) Check the selected printer. You can execute test printing using “Test Print” button.

6) Click the “Next” button, and the Windows Driver installation will continue with the

configured port settings.

PSP Installation

Rev. 1.00 - 11 -

4-2 Ethernet Automatic Installation 1) Connect the printer to the computer, and turn on the power. 2) Select the “Ethernet Auto Search and Configuration” from Port Setting Wizard Step 1.

3) Click the “Next”, then the printer searching will start.

* When the warning window shown above pops up, click “Unblock” button to allow searching.

PSP Installation

Rev. 1.00 - 12 -

4) When port searching is completed, select the corresponding printer from the “Search Result”, set the network information of the printer, and click the “Set” button. Click the “Next” button when re-searching is completed and when the network information of the selected printer is correct.

5) Check the selected printer. You can execute printing with the “Test Print” button.

6) Click the “Next” button and the Windows Driver installation with the configured port

settings will continue.

PSP Installation

Rev. 1.00 - 13 -

4-3 Manual Installation 1) Connect the printer to the computer and turn on the power. 2) Select “Manual Select and Configuration” from Port Setting Wizard Step 1.

3) Click the “Next” button to move to the port setting step. Configure the port settings of the

corresponding printer.

4) Click the “Next” button. The procedures after this step are the same as the automatic installation.

PSP Installation

Rev. 1.00 - 14 -

4-4 Default Value Installation 1) Select “Default Configuration” from the Port Setting Wizard Step 1.

2) Click the “Next” button. Procedures after this step are the same as the automatic installation. * Default value setting information - Port: COM1 - Baudrate: 9600 - Bit Length: 8 - Parity: None - Stop bits: 1 - Flow Control: Hardware

PSP Installation

Rev. 1.00 - 15 -

5. Running PSP Launch You can set/execute the installed driver and utility using the ”PSP Launch” software. You can find the program in the following location. Start Menu->All Programs > BIXOLON > SRP-350plusII POS Software Package > PSP Launcher

* Refer to PSP Launch Manual for the instructions on using the program.

(Start Menu > All Programs > BIXOLON > SRP-350plusII POS Software Package > Manual )

6. Caution The installed BIXOLON SRP-350plusII PSP supports devices provided by BIXOLON. The normal operation of the installed software with other devices is not guaranteed.